pcibios_* remaining code is not neccessary at all. We can use
map_irq set to of_irq_parse_and_map_pci driver 'probe' function.
Remove this code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RALINK_PCI_CONFIG_DATA_VIRTUAL_REG is a very long name. Make it a bit
shorter renaming it to RALINK_PCI_CONFIG_DATA.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some preprocessor definitions are using a custom implementation of
BIT macro. Just use linux kernel BIT macro instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RALINK_PCI_BASE has no sense and this driver has base address readed
and mapped from device tree. Remove remaining uses of it and
change code to use pcie_read and pcie_write functions in places
where this was being used.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RALINK_PCI_PCICFG_ADDR and RALINK_PCI_PCIMSK_ADDR are defined to be directly
referenced for read and write. Use pcie_read and pcie_write instead changing
its definition to a simple relative offset to pcie base address.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are some includes that are being used that are not really
needed to correct driver compilation. Remove them and reorder the
rest alphabetically.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pcie_[read|write] fucntions to read and write controller registers.
Define those only by offset and pass controller offset + register offset
relative to base address to functions.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There some macros that are not being used. Remove them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
write_config function is always called with bus and func
being 0. Avoid those params and just use 0 inside the
function. Review parameter types changing for more proper
ones.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
read_config function is always called with bus and func
being 0. Avoid those params and just use 0 inside the
function. Return readed value instead pass a reference
parameter.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introdice this functions to make easier to write/read to/from
an offset relative to base address
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver is using now pci subsystem generics reads and writes and requesting
bus resources without using legacy code functions. Because of this there is
a lot of dead code that can be removed.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
map_bus callback is called before every .read/.write operation.
Implement it and change custom read write operations for the
pci subsystem generics. Make the probe function to don't use
legacy stuff and request bus resources directly. Get pci register
base and ranges from device tree.
The driver is not using PCI_LEGACY code anymore and shall use the
PCI_DRIVERS_GENERIC option to correct compile it. Add also new
Kconfig file for this controller setting there its correct dependencies.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes the following checkpatch warnings:
Use #include <linux/pci.h> instead of <asm/pci.h>
Use #include <linux/io.h> instead of <asm/io.h>
Signed-off-by: Oliver Hübers <oliver.huebers@web.de>
Signed-off-by: Vanessa Borgmann <nessa.x@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To get config address the same pattern is repeated in some functions
along the code. Factor out a new mt7621_pci_get_cfgaddr for calculate
it and use it in convenient places. Adjust types to match to u32 where
is neccesary.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro is not being used at all along the code.
Just remove it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moves some open-braces to the end of the conditional statement to match the
kernel's coding style
Signed-off-by: Peter Vernia <peter.vernia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds spaces after commas in parameter lists in pci-mt7621.c
Signed-off-by: Peter Vernia <peter.vernia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add spaces in front of the equals sign in assignment operations
Signed-off-by: Peter Vernia <peter.vernia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds spaces before open parenthesis, and removes spaces after open parenthesis
Signed-off-by: Peter Vernia <peter.vernia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes space after * to fix the following checkpatch error:
ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver currently has internal knowledge ofthe address
of system-control registers and accesses them by dereferencing
a constant pointer.
It is cleaner to use rt_sysc_r32(), rt_sysc_w32(), rt_sysc_m32()
which is a more standard interface.
So change the defined names to offsets instead of pointers,
and use these functions.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl warning:
WARNING: line over 80 characters
Signed-off-by: Sankalp Negi <sankalpnegi2310@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some code is dead because it is commented out.
Some is dead because it is uninteresting printks.
Some is dead because it declares unused functions.
Remove it all.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These resources are extracted from devicetree, so they aren't
needed here.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Code currently defines:
#define CONFIG_PCIE_PORT0
#define CONFIG_PCIE_PORT1
#define CONFIG_PCIE_PORT2
#define GPIO_PERST
and then compiles code only if they are defined.
We might want to disable some of these via devicetree one
day, but for now just remove the #defines and the
conditions - all the code for different ports is
easy to identify.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- remove white space at end of line.
- no more than 2 blank line at a time
- remove spaces before tabs
- use tabs to line things up
- re-indent some #define do{}while(0)
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the Interrupts for the PCI adapters are listed in
devicetree we shouldn't need to have them explicit in the code.
The simplest way to do this is to use of_irq_parse_and_map_pci()
and specify an interrupt-map which identifies the different
PCI hosts by bus/slot numbers.
This has the advantage that the hwirq number are mapped to virq
numbers for us, so the ugly hack can go.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the owner assignment form the platform driver as
platform_driver_register() already initializes the owner.
Found using coccinelle.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mt7621-pci support 3 pci devices and has 3 interrupts.
Each of these need to be enabled by the same sort of hack to
map hwirq number to virq number.
This is a hack which will go as soon as I understand how this is
supposed to work.
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown: forward port and hack to work on GNUBEE1
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
