Just simply use dgap_release_remap() in dgap_cleanup_board() for
releasing map memory.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using schedule_timeout_interruptible() is exactly same as
setting a status of current process and calling schedule_timeout().
Removes dgap_ms_sleep(), because this function is used
only when closing tty channel on dgap_tty_close().
And also removes ch_close_delay that is always set to 250
on dgap_tty_init().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The use_interrupts is used only in dagp_request_irq() for checking
a value from user config file. It doesn't need in board_t struct.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The brd(board_t) is initialized with zero, so "intr_used"
is not needed to set zero when request_irq() is failed.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* use dev_{warn,err} instead of pr_{warn,err}
* removes dgap_err() and just use pr_err(). pr_err() used in
dgap_parsefile() not dev_err() because if dgap_parsefile() is
failed, just one message is printed.
* removes "out of memory" messages.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is same manner with setting a board type.
After allocating a type of "MNODE", get a token value
set to "module.type".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is same manner with setting a board type.
For example of config file for concentrator,
"conc ccon" or
"conc epcon"
After allocating a type of "CNODE" then set a type of concentrator.
So remove cases in swith statement, just get a token from string
and set to "conc.type". And also it doesn't need to "conc.v_type".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Board types need to separate normal command like IO, MEM and so on.
And the board type will come after "board" string in config file normally.
(If it is not, dgap_gettok returns an error with zero)
After that, set a variable of a number which is matched with specific
a board number to "board.type". The dgap_gettok() returns that number so
just set to "board.type" and also "v_type" can be removed.
In case of boards of PCI type are set variables to zero. These can
be removed because "p" as cnode get memory from kzalloc so already
set to zero.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If true_count is not same with brd->nasync, warning messages are
printed. But it has duplicated messages within if statement.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are already defined in dgap.h.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dgap_major_serial_registered and dgap_major_transparent_print_registered
could be checked whether a board is initialized.
But it doesn't need to check that variables becasue dgap module
isn't calling the dgap_cleanup_tty() without initializing
for a board completely.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a configration file is parsed with dgap_parsefile(),
makes nodes for saving configrations for board.
Making a node will allocate node memory and strings for saving
configrations with kstrdup().
So these are freed when dgap is unloaded or failed to initialize.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Tested-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dgap_newnode() is useless for creating new node.
So just use kzalloc and set a type in case statement.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If rc is zero, this function will returns with an error and
cannot reach switch-case statement.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The retval in dgap_block_til_ready() is initialized to zero,
and if no error has occurred in this function, the retval has a zero.
So it doesn't need to check "retval" itself.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_tty_digisetcustombaud() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch", "bd and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_tty_digigetcustombaud() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch" and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_tty_digisetedelay() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch", "bd and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_set_modem_info() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch", "bd" and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_tty_digigeta() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch" and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks in dgap_tty_digiseta() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch" and "bd" which are used in dgap_tty_digiseta().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dgap_param() has a paramter which is tty_struct and
use variables in that struct. That variables which are "ch", "bd", "bs"
and "un" do not need to check NULL so these statements are removed.
And also change the parameter of this function because
it is possible to let someone know what paramters
are needed for this function.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "ts" is not used in dgap_param().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "ch" is already checking in caller.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Null checks for tty, un and ch are already done by caller,
so replace parameter "tty" with "ch" and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The brd is already checked by earlier function in dgap_init_one().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dgap_dl_wait and kme_wait are not used in dgap.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dgap_init_pci() calls only pci_register_driver().
It doesn't need to make a function for that.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clean up checkpatch.pl warning:
WARNING: Missing a blank line after declarations
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clean up checkpatch warning:
WARNING: void function return statements are not generally useful
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make dgap_found_board() return a brd pointer and that brd pointer
assign to dgap_board[] in the end of the dgap_init_one().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dgap_init_one() needs to handle error properly
if one of functions in dgap_init_one() is failed.
Introduce some functions for handling error in dgap_init_one()
- dgap_tty_unregister() : unregister tty driver
- dgap_free_flipbuf() : free flip buffer
- dgap_release_remap() : release memory region and unmapped memory.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dgap_firmware_load() has a lot of stuff which are
unrelated with loading firmware.
So just moved to dgap_init_one().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dgap_after_config_loaded() as function name doesn't tell
what it does.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dgap_free_irq() will free the irq which is requested in
dgap_request_irq().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It should be called after dgap_tty_register_ports() is failed.
So channels which are allocated in dgap_tty_init() will be freed.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
firstminor in struct borad_t is always zero, so it
can be removed.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"remove" parameter is not used in dgap_parsefile().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- dgap_tty_uninit() doesn't match dgap_tty_init() at all.
so rename it. It is just used for cleanup when this module is
exited or failed to initialize by dgap_init_module.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Pass "dgap_numboards" to dgap_found_board() instead of
using a global variable.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dgap_config_buf is only used in dgap_firmware_load().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
