Commit Graph

55 Commits

Author SHA1 Message Date
Linus Torvalds
9e9ac89666 fbdev changes for 3.17
* Much better HDMI infoframe support for OMAP
 * Cirrus Logic CLPS711X framebuffer driver
 * DT support for PL11x CLCD driver
 * Various small fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT5LUrAAoJEPo9qoy8lh71G2kP/RyomOV8mOPErkVgslJukMlW
 iJO/Y47GcnHzosKK+7u8MUXlpbBdZjyoaKJxuh+D1OL0vc/LrSar4IwicqqGcD2C
 l5N8b9NytOf+sjtYuD24xkGo9bLr8vkaVNC3cgPNjE/x1kgRrtHoap1NOlv8vvuT
 OnbSkRdg/oENrdzwWjwJeayvT5a3TxLJY5JM9IMTzw6CKROIYScEmHUsy0jH2h/g
 60OrGPdzmPPutUKA/ZWe8Nu0Mhf4GcOeIl8CZ/u7ZyME7NKezyF0iATpMzn3+ylf
 9GafGbsxwgNW2KwoF379w6CV49UNyQhx4qxlkg8/N2km6ot6s1WoJrb/32qPu05J
 Wydfbovxo9elM/144m47a89TR4xV6Ia35kbSDmwrR7gmKjIDUE34Ruc7RdCLdO8n
 SxIG5724pktKlP1bdOT6gCLFnDq6vFK0gNnWwlCRKWnwg0H+Cyg5S07BNEF7/dvO
 gOkRPuyWz3m4rlpl9dL+TW+jaQR/FQAAgf8pUdjBeUTogUTvWf2NBb3H1bKoAnaE
 4fhLwE1qUxep3rhOqOpLbGzDmpvt0ebcNJzseypaSTO9c8QNbZJkxLLC1jchUjPj
 6FP4/SocuySik3on6Qulj6xGrp4zskBnjsTXOIZzxXjByX6uf/DNWPHEcEM9zIEk
 u0trGuXxlx8JkRkV/7aE
 =gXX+
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev updates from Tomi Valkeinen:
 - much better HDMI infoframe support for OMAP
 - Cirrus Logic CLPS711X framebuffer driver
 - DT support for PL11x CLCD driver
 - various small fixes

* tag 'fbdev-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (35 commits)
  OMAPDSS: DSI: fix depopulating dsi peripherals
  video: hyperv: hyperv_fb: refresh the VM screen by force on VM panic
  video: ARM CLCD: Fix DT-related build problems
  drivers: video: fbdev: atmel_lcdfb.c: Add ability to inverted backlight PWM.
  video: ARM CLCD: Add DT support
  drm/omap: Add infoframe & dvi/hdmi mode support
  OMAPDSS: HDMI: remove the unused code
  OMAPDSS: HDMI5: add support to set infoframe & HDMI mode
  OMAPDSS: HDMI4: add support to set infoframe & HDMI mode
  OMAPDSS: HDMI: add infoframe and hdmi_dvi_mode fields
  OMAPDSS: add hdmi ops to hdmi-connector and tpd12s015
  OMAPDSS: add hdmi ops to hdmi_ops and omap_dss_driver
  OMAPDSS: HDMI: remove custom avi infoframe
  OMAPDSS: HDMI5: use common AVI infoframe support
  OMAPDSS: HDMI4: use common AVI infoframe support
  OMAPDSS: Kconfig: select HDMI
  OMAPDSS: HDMI: fix name conflict
  OMAPDSS: DISPC: clean up dispc_mgr_timings_ok
  OMAPDSS: DISPC: reject interlace for lcd out
  OMAPDSS: DISPC: fix debugfs reg dump
  ...
2014-08-08 18:09:33 -07:00
Tomi Valkeinen
e4e42b8ad2 OMAPDSS: DSI: fix depopulating dsi peripherals
After v3.16-rc1, devices populated with of_platform_populate() should be
depopulated using of_platform_depopulate(). Failure to do so prevents
the devices from being populated again (e.g. when loading a module).

This patch fixes the problem for the OMAP DSI driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-08 14:26:36 +03:00
Tomi Valkeinen
3ddd605e8d OMAPDSS: HDMI: remove the unused code
We no longer need the horrible driver internal videmode tables, which
were used to decide if a given videomode is a HDMI or DVI mode. So
remove all related code.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:59 +03:00
Tomi Valkeinen
769dcb114e OMAPDSS: HDMI5: add support to set infoframe & HDMI mode
Instead of using hardcoded AVI infoframe, and a custom HDMI/DVI mode
selection based in internal videomode tables, add support to set the
infoframe and HDMI/DVI mode.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:58 +03:00
Tomi Valkeinen
ab0aee9526 OMAPDSS: HDMI4: add support to set infoframe & HDMI mode
Instead of using hardcoded AVI infoframe, and a custom HDMI/DVI mode
selection based in internal videomode tables, add support to set the
infoframe and HDMI/DVI mode.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:58 +03:00
Tomi Valkeinen
c9d2c79944 OMAPDSS: HDMI: add infoframe and hdmi_dvi_mode fields
Add infoframe and hdmi_dvi_mode fields to 'struct hdmi_config' which
will be used in the following patches for OMAP4 and OMAP5 HDMI.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:58 +03:00
Tomi Valkeinen
9fb1737dff OMAPDSS: add hdmi ops to hdmi-connector and tpd12s015
Add pass-through functions for set_infoframe and set_hdmi_mode to
hdmi-connector and tpd12s015 drivers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:58 +03:00
Tomi Valkeinen
bbcc14ebf9 OMAPDSS: HDMI: remove custom avi infoframe
We now use the common AVI infoframe support, so the OMAP specific AVI
infoframe code can be removed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:58 +03:00
Tomi Valkeinen
d0678c303f OMAPDSS: HDMI5: use common AVI infoframe support
Instead of using OMAP specific AVI infoframe structs, use the common one
from include/linux/hdmi.h.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:58 +03:00
Tomi Valkeinen
db85ca7ca5 OMAPDSS: HDMI4: use common AVI infoframe support
Instead of using OMAP specific AVI infoframe structs, use the common one
from include/linux/hdmi.h.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:58 +03:00
Tomi Valkeinen
89a2d6183b OMAPDSS: Kconfig: select HDMI
Select HDMI support to be able to use HDMI infoframe helpers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:58 +03:00
Tomi Valkeinen
d27d20c88d OMAPDSS: HDMI: fix name conflict
OMAP HDMI driver has an 'enum hdmi_audio_sample_size', which conflicts
with the common include/linux/hdmi.h.

Change the name of the OMAP specific enum with '_omap" postfix.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:57 +03:00
Tomi Valkeinen
eadd33bb95 OMAPDSS: DISPC: clean up dispc_mgr_timings_ok
dispc_mgr_timings_ok() is a bit confusing how it handles the return
value.

Change the function to just return immediately when a timing is deemed
not valid, making the code much easier to follow.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:57 +03:00
Tomi Valkeinen
beb8384d4a OMAPDSS: DISPC: reject interlace for lcd out
OMAP2/3 does not support interlace for LCD out. OMAP4+ does, but is not
supported by the driver at the moment.

The driver still accepts interlaced mode for LCD out, causing broken
display output.

This patch makes dispc reject interlace for LCD out.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:57 +03:00
Tomi Valkeinen
21d9ca9063 OMAPDSS: DISPC: fix debugfs reg dump
DISPC reg dump prints a few registers twice. Remove the extra prints.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:57 +03:00
Sachin Kamat
06f7d79317 video: omapdss: Fix potential null pointer dereference
kmalloc can return null. Add a check to avoid potential null
pointer dereference error when the pointer is accessed later.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-26 14:40:15 +03:00
Himangi Saraogi
cb6ec182c1 drivers/video/fbdev : dereference without an error test
After a variable is assigned the result of backlight_device_register, an
error test should be performed before a dereference.

A simplified version of the semantic match that finds this problem is
as follows:

// <smpl>
@def0@
expression x;
position p0;
@@

x@p0 = backlight_device_register(...)

@protected@
expression def0.x,E;
position def0.p0;
position p;
statement S;
@@
x@p0
... when != x = E
if (!IS_ERR(x) && ...) {<... x@p ...>} else S

@unprotected@
expression def0.x,E;
identifier fld;
position def0.p0;
position p != protected.p;
@@
x@p0
... when != x = E
* x@p->fld
// </smpl>

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-26 13:48:00 +03:00
Tomi Valkeinen
f2dd36ac99 OMAPDSS: move 'compatible' converter to omapdss driver
Move the panel/encoder driver compatible-string converter from
arch/arm/mach-omap2/display.c to omapdss driver. That is a more logical
place for it, as it's really an omapdss internal hack.

The code is rewritten to follow the video node graph, starting from
omapdss. This removes the need to have the device compatible-string
database.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-28 09:25:15 +03:00
Tomi Valkeinen
2b22df835b OMAPDSS: HDMI: fix devm_ioremap_resource error checks
devm_ioremap_resource returns ERR_PTR on error, not NULL. Fix the
error checks in the driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-23 14:50:09 +03:00
Tomi Valkeinen
2dcfdc3066 OMAPDSS: HDMI: remove unused defines
Remove some unused defines from the HDMI driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-23 14:40:47 +03:00
Tomi Valkeinen
fc2daf3b1d OMAPDSS: HDMI: cleanup WP ioremaps
Commit 59b3d38a36 missed cleaning up the
hdmi_wp.c file.

Clean up hdmi_wp.c the same way as the others.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-23 14:37:44 +03:00
Tomi Valkeinen
b36250d8b5 OMAPDSS: panel NEC-NL8048HL11 DT support
We don't have any working boards using this panel right now, and the
panel driver looks odd compared to the panel specs. For example, the
panel spec does not mention any QVGA pin.

So, while this patch adds DT support to the driver, it's not really
supported and there are not bindings documentation for the panel until
someone can verify how the panel actually works.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Erik Gilling <konkers@android.com>
2014-05-20 14:39:47 +03:00
Tomi Valkeinen
597cc1e451 OMAPDSS: Panel TPO-TD043MTEA1 DT support
Add DT support for panel TPO-TD043MTEA1.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Grazvydas Ignotas <notasas@gmail.com>
2014-05-20 14:39:46 +03:00
Tony Lindgren
be88c16a22 OMAPDSS: panel sharp-ls037v7dw01 DT support
Add DT support for sharp-ls037v7dw01.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-20 14:39:45 +03:00
Tony Lindgren
9522f9fe86 OMAPDSS: panel-sharp-ls037v7dw01: update to use gpiod
Using gpiod will make it easier to add device tree support
for this panel in the following patches.

Note that all the GPIOs for this panel are optional, any
of the the GPIOs could be configured with external pulls
instead of GPIOs, so let's not error out if GPIOs are not
found to make the panel more generic.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-20 14:39:45 +03:00
Tomi Valkeinen
1b71f1047e OMAPDSS: panel-lgphilips-lb035q02: Add DT support
Add DT support for panel-lgphilips-lb035q02.

We disable the use of the backlight_gpio as it should be handled via
backlight framework with DT boots.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Florian Vaussard <florian.vaussard@epfl.ch>
2014-05-20 14:39:39 +03:00
Tomi Valkeinen
fbf7309823 OMAPDSS: panel-lgphilips-lb035q02: use gpiod for enable gpio
The new gpiod API supports automatic handling of active-high/active-low
with DT. To make it possible to use that when booting with DT, change
the driver's handling of the enable GPIO to use gpiod.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-20 09:35:40 +03:00
Jyri Sarha
e2ccb0eee5 OMAPDSS: hdmi5_core: Fix compilation with OMAP5_DSS_HDMI_AUDIO
Use correct variable name for base address.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-19 16:27:07 +03:00
Tomi Valkeinen
c6e29d26df OMAPDSS: panel-dpi: enable-gpio
The enable gpio should be optional, but the driver returns an error if
it doesn't get the gpio.

So change the driver to accept -ENOENT error.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Joachim Eastwood <manabian@gmail.com>
2014-05-19 16:26:58 +03:00
Tomi Valkeinen
d80e02ef34 OMAPDSS: Fix writes to DISPC_POL_FREQ
When omapdss writes to DISPC_POL_FREQ register, it always ORs the bits
with the current contents of the register, never clearing the old ones,
causing wrong signal polarity settings.

As we write all the bits in DISPC_POL_FREQ, we don't need to care about
the current contents of the register. So fix the issue by constructing
new register value from scratch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:28:39 +03:00
Tomi Valkeinen
59b3d38a36 OMAPDSS: HDMI: cleanup ioremaps
Now that all the boards using OMAP HDMI are using DT boot, we can remove
the hacks for getting the ioresources with non-DT boot.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:30 +03:00
Tomi Valkeinen
f5bab22291 OMAPDSS: HDMI: Add OMAP5 HDMI support
This adds a new driver to omapdss for OMAP5 HDMI. However, the new
driver uses common HDMI files which are shared with OMAP4 HDMI driver.

OMAP5 HDMI has a different HDMI core IP compared to OMAP4, but has very
similar PLL and PHY IPs which can be handled with common code.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:30 +03:00
Archit Taneja
2d64b1b314 OMAPDSS: HDMI: PLL changes for OMAP5
Add a features struct to differentiate between the HDMI PLLs on OMAP4
and OMAP5. The OMAP5 PLL is more sensitive when it comes to locking.  We
need to ensure that the DCO freq isn't too low for lower pixel clocks.

Modify the PLL computation slightly to ensure the HDMI PLL locks for lower
frequencies. This will be later replaced by a more complex computation
which makes sure all the PLL constraints are met.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:29 +03:00
Archit Taneja
19289fdcbe OMAPDSS: HDMI: PHY changes for OMAP5
OMAP5 HDMI PHY has some differences compared to OMAP4 HDMI PHY. This
patch creates a features struct which help the driver configure the PHY
based on what SoC it is.

Some of the features aren't currenlty used, but will come in use later.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:29 +03:00
Archit Taneja
8955b727af OMAPDSS: HDMI: support larger register offsets for OMAP5 HDMI core
The HDMI core IP on OMAP5 has a wider address range for registers. The offsets
for the later registers can't fit into the u16 type currently used for hdmi
register read and write functions. Use u32 for offsets instead.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:29 +03:00
Tomi Valkeinen
dcf5f7299e OMAPDSS: HDMI: move irq & phy pwr handling
HDMI IRQ handling was moved into hdmi_phy.c when restructuring the HDMI
driver. While this worked fine, it's not correct.

The HDMI IRQ handling should be either in the hdmi_wp, or in the main
hdmi driver. This patch moves the handling to the main hdmi driver, as I
feel it's a more appropriate choice.

This move also requires changing the handling of the PHY power, as that
was partly handled in the IRQ handler. The PHY power is handled via the
WP module. An option would be to give HDMI PHY driver function pointers
that it could use to manage the PHY power, but as the PHY power is not
needed to access the PHY registers, the handling was also moved to the
main HDMI driver. This could be changed later if need be.

Note that there's slightly similar power issue with the PLL: the HDMI
PLLs power is also handled via the WP module. For now, the PLL power
handling is still done inside the PLL driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:28 +03:00
Tomi Valkeinen
543e761fb9 OMAPDSS: HDMI: improve Makefile
We'll soon add support for OMAP5 HDMI, which uses some of the same files
as OMAP4 HDMI does.

This patch adds a new config entry "OMAP2_DSS_HDMI_COMMON", which both
OMAP4 and OMAP5 HDMI config entries can select. OMAP2_DSS_HDMI_COMMON
will cause the common HDMI files to be compiled.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:28 +03:00
Tomi Valkeinen
bd3ad6a4fc OMAPDSS: DSI: Add OMAP5 DSI module IDs
Add OMAP5 DSI module ID support to the OMAP DSI driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:28 +03:00
Tomi Valkeinen
35fd32d600 OMAPDSS: DPI: fix LCD3 DSI source
At the moment the dpi driver does not handle LCD3 clock source at all.

LCD3 channel gets the DSI PLL clock from DSI2 instance. Add support for
LCD3's clock source in the dpi driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:28 +03:00
Tomi Valkeinen
5b3075ced1 OMAPDSS: features: fix OMAP5 features
OMAP5 has LCD3 overlay manager, and total 4 overlay managers. These are
not correctly defined in the dss features. Fix them.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:27 +03:00
Tomi Valkeinen
2e7e6b6892 OMAPDSS: DSS & DISPC DT support for OMAP5
Add omap5 entries to dispc's and dss's of_device_id tables.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:27 +03:00
Sathya Prakash M R
d6279d4ae1 OMAPDSS: Add DSS features for AM43xx
Add DSS features for AM43xx.

Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:26 +03:00
Tomi Valkeinen
246def36e2 OMAPDSS: remove venc_panel.c
The use of venc_panel.c was removed in
09d2e7cdeb (OMAPDSS: VENC: remove code
related to old panel model), but the file itself was left behind. Remove
the unused file.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 13:24:10 +03:00
Archit Taneja
0059277276 omapdss: remove check for simpler port/endpoint binding
The support for simpler port/endpoint binding was removed in the merged version
of omapdss DT. But dss_init_ports still tries to get to an endpoint even if no
port exists. Remove this as this doesn't work.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:58:04 +03:00
Fabian Frederick
a41ca72e57 OMAPDSS: add __exit to dss_uninit_ports
dss_uninit_ports is only called by __exit omap_dsshw_remove

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-omap@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:56:32 +03:00
Arnd Bergmann
24f13a6679 video: omap2dss: fix LPAE warnings
If LPAE is enabled, dma_addr_t is 64 bit, so we have to
change a few type for everything in this driver to match
again.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:55:18 +03:00
Marek Belisko
c84d95058a omapdss: panel-tpo-td028ec1: Add module alias
Add module alias string to make it working when panel is compiled as module.
Without this change panel module is not probed thus display is not working.

Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:35:51 +03:00
Marek Belisko
1f32450911 omapdss: panel-tpo-td028ec1: Add DT support.
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:35:51 +03:00
Tomi Valkeinen
02b7a32083 OMAPDSS: DSI: set regulator voltage to 1.8V
Set the DSI vdd regulator voltage to the required 1.8V.

This is required for the case when the regulator in the DT data defines
a range of allowed voltages. In this case it's required to set the
voltage, as otherwise enabling the voltage fails.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07 11:31:27 +03:00
Tomi Valkeinen
818a053c54 OMAPDSS: HDMI4: set regulator voltage to 1.8V
Set the HDMI vdda regulator voltage to the required 1.8V.

This is required for the case when the regulator in the DT data defines
a range of allowed voltages. In this case it's required to set the
voltage, as otherwise enabling the voltage fails.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07 11:31:23 +03:00