Deal with some warnings generated from make W=1:
(1) Add/remove/fix kerneldoc parameters descriptions.
(2) Turn cifs' rqst_page_get_length()'s banner comment into a kerneldoc
comment. It should probably be prefixed with "cifs_" though.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The problem is the mismatched types between "ctx->total_len" which is
an unsigned int, "rc" which is an int, and "ctx->rc" which is a
ssize_t. The code does:
ctx->rc = (rc == 0) ? ctx->total_len : rc;
We want "ctx->rc" to store the negative "rc" error code. But what
happens is that "rc" is type promoted to a high unsigned int and
'ctx->rc" will store the high positive value instead of a negative
value.
The fix is to change "rc" from an int to a ssize_t.
Fixes: c610c4b619 ("CIFS: Add asynchronous write support through kernel AIO")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Close file immediately when lock is set.
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Below traces are observed during fsstress and system got hung.
[ 130.698396] watchdog: BUG: soft lockup - CPU#6 stuck for 26s!
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
During unlink/rename instead of closing all the deferred handles
under tcon, close only handles under the requested dentry.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Correct kernel-doc comments pointed out by the
automated kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
checkpatch complains about source files with filenames (e.g. in
these cases just below the SPDX header in comments at the top of
various files in fs/cifs). It also is helpful to change this now
so will be less confusing when the parent directory is renamed
e.g. from fs/cifs to fs/smb_client (or fs/smbfs)
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Cached root file was not being completely invalidated sometimes.
Reproducing:
- With a DFS share with 2 targets, one disabled and one enabled
- start some I/O on the mount
# while true; do ls /mnt/dfs; done
- at the same time, disable the enabled target and enable the disabled
one
- wait for DFS cache to expire
- on reconnect, the previous cached root handle should be invalid, but
open_cached_dir_by_dentry() will still try to use it, but throws a
use-after-free warning (kref_get())
Make smb2_close_cached_fid() invalidate all fields every time, but only
send an SMB2_close() when the entry is still valid.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
The FSCTL definitions are in smbfsctl.h which should be
shared by client and server. Move the updated version of
smbfsctl.h into smbfs_common and have the client code use
it (subsequent patch will change the server to use this
common version of the header).
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
As we move to common code between client and server, we have
been asked to make the names less confusing, and refer less
to "cifs" and more to words which include "smb" instead to
e.g. "smbfs" for the client (we already have "ksmbd" for the
kernel server, and "smbd" for the user space Samba daemon).
So to be more consistent in the naming of common code between
client and server and reduce the risk of merge conflicts as
more common code is added - rename "cifs_common" to
"smbfs_common" (in future releases we also will rename
the fs/cifs directory to fs/smbfs)
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add some missing defines used by ksmbd to the client
version of smbfsctl.h, and add a missing newer define
mentioned in the protocol definitions (MS-FSCC).
This will also make it easier to move to common code.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=d9f7
-----END PGP SIGNATURE-----
Merge tag '5.15-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client updates from Steve French:
"Eleven cifs/smb3 client fixes:
- mostly restructuring to allow disabling less secure algorithms
(this will allow eventual removing rc4 and md4 from general use in
the kernel)
- four fixes, including two for stable
- enable r/w support with fscache and cifs.ko
I am working on a larger set of changes (the usual ... multichannel,
auth and signing improvements), but wanted to get these in earlier to
reduce chance of merge conflicts later in the merge window"
* tag '5.15-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not leak EDEADLK to dgetents64 for STATUS_USER_SESSION_DELETED
cifs: add cifs_common directory to MAINTAINERS file
cifs: cifs_md4 convert to SPDX identifier
cifs: create a MD4 module and switch cifs.ko to use it
cifs: fork arc4 and create a separate module for it for cifs and other users
cifs: remove support for NTLM and weaker authentication algorithms
cifs: enable fscache usage even for files opened as rw
oid_registry: Add OIDs for missing Spnego auth mechanisms to Macs
smb3: fix posix extensions mount option
cifs: fix wrong release in sess_alloc_buffer() failed path
CIFS: Fix a potencially linear read overflow
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmEmTZcACgkQnJ2qBz9k
QNkkmAgArW6XoF1CePds/ZaC9vfg/nk66/zVo0n+J8xXjMWAPxcKbWFfV0uWVixq
yk4lcLV47a2Mu/B/1oLNd3vrSmhwU+srWqNwOFn1nv+lP/6wJqr8oztRHn/0L9Q3
ZSRrukSejbQ6AvTL/WzTNnCjjCc2ne3Kyko6W41aU6uyJuzhSM32wbx7qlV6t54Z
iint9OrB4gM0avLohNafTUq6I+tEGzBMNwpCG/tqCmkcvDcv3rTDVAnPSCTm0Tx2
hdrYDcY/rLxo93pDBaW1rYA/fohR+mIVye6k2TjkPAL6T1x+rxeT5qnc+YijH5yF
sFPDhlD+ZsfOLi8stWXLOJ+8+gLODg==
=pDBR
-----END PGP SIGNATURE-----
Merge tag 'hole_punch_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fs hole punching vs cache filling race fixes from Jan Kara:
"Fix races leading to possible data corruption or stale data exposure
in multiple filesystems when hole punching races with operations such
as readahead.
This is the series I was sending for the last merge window but with
your objection fixed - now filemap_fault() has been modified to take
invalidate_lock only when we need to create new page in the page cache
and / or bring it uptodate"
* tag 'hole_punch_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
filesystems/locking: fix Malformed table warning
cifs: Fix race between hole punch and page fault
ceph: Fix race between hole punch and page fault
fuse: Convert to using invalidate_lock
f2fs: Convert to using invalidate_lock
zonefs: Convert to using invalidate_lock
xfs: Convert double locking of MMAPLOCK to use VFS helpers
xfs: Convert to use invalidate_lock
xfs: Refactor xfs_isilocked()
ext2: Convert to using invalidate_lock
ext4: Convert to use mapping->invalidate_lock
mm: Add functions to lock invalidate_lock for two mappings
mm: Protect operations adding pages to page cache with invalidate_lock
documentation: Sync file_operations members with reality
mm: Fix comments mentioning i_mutex
RHBZ: 1994393
If we hit a STATUS_USER_SESSION_DELETED for the Create part in the
Create/QueryDirectory compound that starts a directory scan
we will leak EDEADLK back to userspace and surprise glibc and the application.
Pick this up initiate_cifs_search() and retry a small number of tries before we
return an error to userspace.
Cc: stable@vger.kernel.org
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
MD4 support will likely be removed from the crypto directory, but
is needed for compression of NTLMSSP in SMB3 mounts.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can not drop ARC4 and basically destroy CIFS connectivity for
almost all CIFS users so create a new forked ARC4 module that CIFS and other
subsystems that have a hard dependency on ARC4 can use.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
for SMB1.
This removes the dependency to DES.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
So far, the fscache implementation we had supports only
a small set of use cases. Particularly for files opened
with O_RDONLY.
This commit enables it even for rw based file opens. It
also enables the reuse of cached data in case of mount
option (cache=singleclient) where it is guaranteed that
this is the only client (and server) which operates on
the files. There's also a single line change in fscache.c
to get around a bug seen in fscache.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We were incorrectly initializing the posix extensions in the
conversion to the new mount API.
CC: <stable@vger.kernel.org> # 5.11+
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Suggested-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb_buf is allocated by small_smb_init_no_tc(), and buf type is
CIFS_SMALL_BUFFER, so we should use cifs_small_buf_release() to
release it in failed path.
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
strlcpy() reads the entire source buffer first. This read may exceed the
destination size limit. This is both inefficient and can lead to linear
read overflows if a source string is not NUL-terminated.
Also, the strnlen() call does not avoid the read overflow in the strlcpy
function when a not NUL-terminated string is passed.
So, replace this block by a call to kstrndup() that avoids this type of
overflow and does the same.
Fixes: 066ce68994 ("cifs: rename cifs_strlcpy_to_host and make it use new functions")
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
During unlink/rename/lease break, deferred work for close is
scheduled immediately but in an asynchronous manner which might
lead to race with actual(unlink/rename) commands.
This change will schedule close synchronously which will avoid
the race conditions with other commands.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Steve French <stfrench@microsoft.com>
When rename is executed on directory which has files for which
close is deferred, then rename will fail with EACCES.
This patch will try to close all deferred files when EACCES is received
and retry rename on a directory.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Cc: stable@vger.kernel.org # 5.13
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1972502
PATH_MAX is 4096 but PAGE_SIZE can be >4096 on some architectures
such as ppc and would thus write beyond the end of the actual object.
Cc: <stable@vger.kernel.org>
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Suggested-by: Brian foster <bfoster@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We used to follow the rule earlier that the create SD context
always be a multiple of 8. However, with the change:
cifs: refactor create_sd_buf() and and avoid corrupting the buffer
...we recompute the length, and we failed that rule.
Fixing that with this change.
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We lost parsing of backupuid in the switch to new mount API.
Add it back.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: <stable@vger.kernel.org> # v5.11+
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Clang detected a problem with rc possibly being unitialized
(when length is zero) in a recently added fallocate code path.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
readpage was calculating the offset of the page incorrectly
for the case of large swapcaches.
loff_t offset = (loff_t)page->index << PAGE_SHIFT;
As pointed out by Matthew Wilcox, this needs to use
page_file_offset() to calculate the offset instead.
Pages coming from the swap cache have page->index set
to their index within the swapcache, not within the backing
file. For a sufficiently large swapcache, we could have
overlapping values of page->index within the same backing file.
Suggested by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove the conditional checking for out_data_len and skipping the fallocate
if it is 0. This is wrong will actually change any legitimate the fallocate
where the entire region is unallocated into a no-op.
Additionally, before allocating the range, if FALLOC_FL_KEEP_SIZE is set then
we need to clamp the length of the fallocate region as to not extend the size of the file.
Fixes: 966a3cb7c7 ("cifs: improve fallocate emulation")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 CIFSPOSIXDelFile. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711519 ("Out of bounds write")
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 CIFSPOSIXCreate. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711518 ("Out of bounds write")
Signed-off-by: Steve French <stfrench@microsoft.com>
When remouting a DFS share, force a new DFS referral of the path and
if the currently cached targets do not match any of the new targets or
there was no cached targets, then mark it for reconnect.
For example:
$ mount //dom/dfs/link /mnt -o username=foo,password=bar
$ ls /mnt
oldfile.txt
change target share of 'link' in server settings
$ mount /mnt -o remount,username=foo,password=bar
$ ls /mnt
newfile.txt
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
We only allow sending single credit writes through the SMB2_write() synchronous
api so split this into smaller chunks.
Fixes: 966a3cb7c7 ("cifs: improve fallocate emulation")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reported-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make sure that we do not share tcp sessions of dfs mounts when
mounting regular shares that connect to same server. DFS connections
rely on a single instance of tcp in order to do failover properly in
cifs_reconnect().
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
When sending the compression context to some servers, they rejected
the SMB3.1.1 negotiate protocol because they expect the compression
context to have a data length of a multiple of 8.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We have a few ref counters srv_count, ses_count and
tc_count which we use for ref counting. Added a WARN_ON
during the decrement of each of these counters to make
sure that they don't go below their minimum values.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although it is unlikely to be have ended up with a null
session pointer calling cifs_try_adding_channels in cifs_mount.
Coverity correctly notes that we are already checking for
it earlier (when we return from do_dfs_failover), so at
a minimum to clarify the code we should make sure we also
check for it when we exit the loop so we don't end up calling
cifs_try_adding_channels or mount_setup_tlink with a null
ses pointer.
Addresses-Coverity: 1505608 ("Derefernce after null check")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
When there is no cached DFS referral of tcon->dfs_path, then reconnect
to same share.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Because the out of range assignment to bit fields
are compiler-dependant, the fields could have wrong
value.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213565
cruid should only be used for the initial mount and after this we should use the current
users credentials.
Ignore the original cruid mount argument when creating a new context for a multiuser mount
following a DFS link.
Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Cc: stable@vger.kernel.org # 5.11+
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
We recently fixed DNS resolution of the server hostname during reconnect.
However, server IP address may change, even when the old one continues
to server (although sub-optimally).
We should schedule the next DNS resolution based on the TTL of
the DNS record used for the last resolution. This way, we resolve the
server hostname again when a DNS record expires.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: <stable@vger.kernel.org> # v5.11+
Signed-off-by: Steve French <stfrench@microsoft.com>
Cifs has a following race between hole punching and page fault:
CPU1 CPU2
smb3_fallocate()
smb3_punch_hole()
truncate_pagecache_range()
filemap_fault()
- loads old data into the
page cache
SMB2_ioctl(..., FSCTL_SET_ZERO_DATA, ...)
And now we have stale data in the page cache. Fix the problem by locking
out faults (as well as reads) using mapping->invalidate_lock while hole
punch is running.
CC: Steve French <sfrench@samba.org>
CC: linux-cifs@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
The optional @ref parameter might contain an NULL node_name, so
prevent dereferencing it in cifs_compose_mount_options().
Addresses-Coverity: 1476408 ("Explicit null dereferenced")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Support for faster packet signing (using GMAC instead of CMAC) can
now be negotiated to some newer servers, including Windows.
See MS-SMB2 section 2.2.3.17.
This patch adds support for sending the new negotiate context
with the first of three supported signing algorithms (AES-CMAC)
and decoding the response. A followon patch will add support
for sending the other two (including AES-GMAC, which is fastest)
and changing the signing algorithm used based on what was
negotiated.
To allow the client to request GMAC signing set module parameter
"enable_negotiate_signing" to 1.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use the nice helpers to initialize and the uid/gid/cred_uid when passed as mount arguments.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 PosixLock. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711520 ("Out of bounds write")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 RenameOpenFile. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711521 ("Out of bounds write")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for SMB1 SetFileDisposition (which is used to
unlink a file by setting the delete on close flag). This
changeset doesn't change the address but makes it slightly
clearer.
Addresses-Coverity: 711524 ("Out of bounds write")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the header
structure rather than from the beginning of the struct plus
4 bytes) for setting the file size using SMB1. This changeset
doesn't change the address but makes it slightly clearer.
Addresses-Coverity: 711525 ("Out of bounds write")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although it compiles, the test robot correctly noted:
'cifsacl.h' file not found with <angled> include; use "quotes" instead
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for doing SetPathInfo (setattr) when using the Unix
extensions. This doesn't change the address but makes it
slightly clearer.
Addresses-Coverity: 711528 ("Out of bounds read")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity also complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes) for creating SMB1 symlinks when using the Unix
extensions. This doesn't change the address but
makes it slightly clearer.
Addresses-Coverity: 711530 ("Out of bounds read")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity complains about the way we calculate the offset
(starting from the address of a 4 byte array within the
header structure rather than from the beginning of the struct
plus 4 bytes). This doesn't change the address but
makes it slightly clearer.
Addresses-Coverity: 711529 ("Out of bounds read")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There were three places where we were not taking the spinlock
around updates to server->tcpStatus when it was being modified.
To be consistent (also removes Coverity warning) and to remove
possibility of race best to lock all places where it is updated.
Two of the three were in initialization of the field and can't
race - but added lock around the other.
Addresses-Coverity: 1399512 ("Data race condition")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
There was one place where we weren't locking CurrentMid, and although
likely to be safe since even without the lock since it is during
negotiate protocol, it is more consistent to lock it in this last remaining
place, and avoids confusing Coverity warning.
Addresses-Coverity: 1486665 ("Data race condition")
Signed-off-by: Steve French <stfrench@microsoft.com>
In the other places where we update ses->status we protect the
updates via GlobalMid_Lock. So to be consistent add the same
locking around it in cifs_put_smb_ses where it was missing.
Addresses-Coverity: 1268904 ("Data race condition")
Signed-off-by: Steve French <stfrench@microsoft.com>
We weren't checking if tcon is null before setting dfs path,
although we check for null tcon in an earlier assignment statement.
Addresses-Coverity: 1476411 ("Dereference after null check")
Signed-off-by: Steve French <stfrench@microsoft.com>
dacl_ptr can be null so we must check for it everywhere it is
used in build_sec_desc.
Addresses-Coverity: 1475598 ("Explicit null dereference")
Signed-off-by: Steve French <stfrench@microsoft.com>
in cifs_do_create we check if newinode is valid before referencing it
but are missing the check in one place in fs/cifs/dir.c
Addresses-Coverity: 1357292 ("Dereference after null check")
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In both these cases sid_to_id unconditionally returned success, and
used the default uid/gid for the mount, so setting rc is confusing
and simply gets overwritten (set to 0) later in the function.
Addresses-Coverity: 1491672 ("Unused value")
Signed-off-by: Steve French <stfrench@microsoft.com>
The recently updated MS-SMB2 (June 2021) added protocol definitions
for a new level 60 for query directory (FileIdExtdDirectoryInformation).
Signed-off-by: Steve French <stfrench@microsoft.com>
This code sets "ses" to NULL which will lead to a NULL dereference on
the second iteration through the loop.
Fixes: 85346c17e425 ("cifs: convert list_for_each to entry variant in smb2misc.c")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There were two places where we weren't checking for error
(e.g. ERESTARTSYS) while waiting for rdma resolution.
Addresses-Coverity: 1462165 ("Unchecked return value")
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring fields.
Instead of using memcpy to read across multiple struct members, just
perform per-member assignments as already done for other members.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although we may need this in some cases in the future, remove the
currently unused, non-compounded version of POSIX query info,
SMB11_posix_query_info (instead smb311_posix_query_path_info is now
called e.g. when revalidating dentries or retrieving info for getattr)
Addresses-Coverity: 1495708 ("Resource leaks")
Signed-off-by: Steve French <stfrench@microsoft.com>
We were trying to fill in uninitialized file attributes in the error case.
Addresses-Coverity: 139689 ("Uninitialized variables")
Signed-off-by: Steve French <stfrench@microsoft.com>
Although in practice this can not occur (since IPv4 and IPv6 are the
only two cases currently supported), it is cleaner to avoid uninitialized
variable warnings.
Addresses smatch warning:
fs/cifs/cifs_swn.c:468 cifs_swn_store_swn_addr() error: uninitialized symbol 'port'.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
CC: Samuel Cabrero <scabrero@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
tcon can not be null in SMB2_tcon function so the check
is not relevant and removing it makes Coverity happy.
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Addresses-Coverity: 13250131 ("Dereference before null check")
Signed-off-by: Steve French <stfrench@microsoft.com>
Add SPDX license identifier and replace license boilerplate.
Corrects various checkpatch errors with the older format for
noting the LGPL license.
Signed-off-by: Steve French <stfrench@microsoft.com>
convert list_for_each() to list_for_each_entry() where
applicable.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
convert list_for_each() to list_for_each_entry() where
applicable.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In posix_info_parse() we call posix_info_sid_size twice for each of the owner and the group
sid. The first time to check that it is valid, i.e. >= 0 and the second time
to just pass it in as a length to memcpy().
As this is a pure function we know that it can not be negative the second time and this
is technically a false warning in coverity.
However, as it is a pure function we are just wasting cycles by calling it a second time.
Record the length from the first time we call it and save some cycles as well as make
Coverity happy.
Addresses-Coverity-ID: 1491379 ("Argument can not be negative")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
According to the investigation performed by Jacob Shivers at Red Hat,
cifs_lookup and cifs_readdir leak EAGAIN when the user session is
deleted on the server. Fix this issue by implementing a retry with
limits, as is implemented in cifs_revalidate_dentry_attr.
Reproducer based on the work by Jacob Shivers:
~~~
$ cat readdir-cifs-test.sh
#!/bin/bash
# Install and configure powershell and sshd on the windows
# server as descibed in
# https://docs.microsoft.com/en-us/windows-server/administration/openssh/openssh_overview
# This script uses expect(1)
USER=dude
SERVER=192.168.0.2
RPATH=root
PASS='password'
function debug_funcs {
for line in $@ ; do
echo "func $line +p" > /sys/kernel/debug/dynamic_debug/control
done
}
function setup {
echo 1 > /proc/fs/cifs/cifsFYI
debug_funcs wait_for_compound_request \
smb2_query_dir_first cifs_readdir \
compound_send_recv cifs_reconnect_tcon \
generic_ip_connect cifs_reconnect \
smb2_reconnect_server smb2_reconnect \
cifs_readv_from_socket cifs_readv_receive
tcpdump -i eth0 -w cifs.pcap host 192.168.2.182 & sleep 5
dmesg -C
}
function test_call {
if [[ $1 == 1 ]] ; then
tracer="strace -tt -f -s 4096 -o trace-$(date -Iseconds).txt"
fi
# Change the command here to anything appropriate
$tracer ls $2 > /dev/null
res=$?
if [[ $1 == 1 ]] ; then
if [[ $res == 0 ]] ; then
1>&2 echo success
else
1>&2 echo "failure ($res)"
fi
fi
}
mountpoint /mnt > /dev/null || mount -t cifs -o username=$USER,pass=$PASS //$SERVER/$RPATH /mnt
test_call 0 /mnt/
/usr/bin/expect << EOF
set timeout 60
spawn ssh $USER@$SERVER
expect "yes/no" {
send "yes\r"
expect "*?assword" { send "$PASS\r" }
} "*?assword" { send "$PASS\r" }
expect ">" { send "powershell close-smbsession -force\r" }
expect ">" { send "exit\r" }
expect eof
EOF
sysctl -w vm.drop_caches=2 > /dev/null
sysctl -w vm.drop_caches=2 > /dev/null
setup
test_call 1 /mnt/
~~~
Signed-off-by: Thiago Rafael Becker <trbecker@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Interlink is a special type of DFS link that resolves to a different
DFS domain-based namespace. To determine whether it is an interlink
or not, check if ReferralServers and StorageServers bits are set to 1
and 0 respectively in ReferralHeaderFlags, as specified in MS-DFSC
3.1.5.4.5 Determining Whether a Referral Response is an Interlink.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Decode negTokenInit with lib/asn1_decoder. For that,
add OIDs in linux/oid_registry.h and a negTokenInit
ASN1 file, "spnego_negtokeninit.asn1".
And define decoder's callback functions, which
are the gssapi_this_mech for checking SPENGO oid and
the neg_token_init_mech_type for getting authentication
mechanisms supported by a server.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
When refreshing the DFS cache, keep SMB2 IOCTL calls as much outside
critical sections as possible and avoid read/write starvation when
getting new DFS referrals by using broken or slow connections.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When we lookup an smb session based on session id,
we did not up the ref-count for the session. This can
potentially cause issues if the session is freed from under us.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
It isn't enough to have unshared tcons because multiple DFS mounts can
connect to same target server and failover to different servers, so we
can't use a single tcp server for such cases.
For the simplest solution, use nosharesock option to achieve that.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We don't want to refresh the dfs cache in very short intervals, so
setting a minimum interval of 2 minutes is OK.
If it needs to be refreshed immediately, one could have the cache
cleared with
$ echo 0 > /proc/fs/cifs/dfscache
and then remounting the dfs share.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix cache lookup and hash calculations when handling paths with
different cases.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Convert all dfs paths to dfs cache's local codepage (@cache_cp) and
avoid mixing them with different charsets.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
At every mount, keep all sessions alive that were used for chasing the
DFS referrals as long as the dfs mounts are active.
Use those sessions in DFS cache to refresh all active tcons as well as
cached entries. They will be managed by a list of mount_group
structures that will be indexed by a randomly generated uuid at mount
time, so we can put all the sessions related to specific dfs mounts
and avoid leaking them.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
@noreq param isn't used anywhere, so just remove it.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
On session close, the IPC is closed and the server must release all
tcons of the session. It doesn't matter if we send a ipc close or
not.
Besides, it will make the server to not close durable and resilient
files on session close, as specified in MS-SMB2 3.3.5.6 Receiving an
SMB2 LOGOFF Request.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RHBZ: 1866684
We don't have a real fallocate in the SMB2 protocol so we used to emulate fallocate
by simply switching the file to become non-sparse. But as that could potantially consume
a lot more data than we intended to fallocate (large sparse file and fallocating a thin
slice in the middle) we would only do this IFF the fallocate request was for virtually
the entire file.
This patch improves this and starts allowing us to fallocate smaller chunks of a file by
overwriting the region with 0, for the parts that are unallocated.
The method used is to first query the server for FSCTL_QUERY_ALLOCATED_RANGES to find what
is unallocated in the fallocate range and then to only overwrite-with-zero the unallocated
ranges to fill in the holes.
As overwriting-with-zero is different from just allocating blocks, and potentially much
more expensive, we limit this to only allow fallocate ranges up to 1Mb in size.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add description for `cifs_compose_mount_options` to fix the W=1 warnings:
fs/cifs/cifs_dfs_ref.c:139: warning: Function parameter or
member 'devname' not described in 'cifs_compose_mount_options'
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
The variable rc is being initialized with a value that is never read, the
assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
The only usage of cifs_genl_ops[] is to assign its address to the ops
field in the genl_family struct, which is a pointer to const. Make it
const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
is_sysvol_or_netlogon() is never used, so can remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use %pI6 for IPv6 addresses
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
We missed using the variable length string macros in several
tracepoints. Fixed them in this change.
There's probably more useful macros that we can use to print
others like flags etc. But I'll submit sepawrate patches for
those at a future date.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: <stable@vger.kernel.org> # v5.12
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3.0 doesn't have encryption negotiate context but simply uses
the SMB2_GLOBAL_CAP_ENCRYPTION flag.
When that flag is present in the neg response cifs.ko uses AES-128-CCM
which is the only cipher available in this context.
cipher_type was set to the server cipher only when parsing encryption
negotiate context (SMB3.1.1).
For SMB3.0 it was set to 0. This means cipher_type value can be 0 or 1
for AES-128-CCM.
Fix this by checking for SMB3.0 and encryption capability and setting
cipher_type appropriately.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When smb2 lease parameter is disabled on server. Server grants
batch oplock instead of RHW lease by default on open, inode page cache
needs to be zapped immediatley upon close as cache is not valid.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Removed oplock_break_received flag which was added to achieve
synchronization between oplock handler and open handler by earlier commit.
It is not needed because there is an existing lock open_file_lock to achieve
the same. find_readable_file takes open_file_lock and then traverses the
openFileList. Similarly, cifs_oplock_break while closing the deferred
handle (i.e cifsFileInfo_put) takes open_file_lock and then sends close
to the server.
Added comments for better readability.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
