There is an existing function to decrease reference counter
of the device, let's use it.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Patches for 4.16 that are dependent on patches sent to 4.15-rc.
These are small clean ups for the vmw_pvrdma and i40iw drivers.
* 'from-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git:
RDMA/vmw_pvrdma: Remove usage of BIT() from UAPI header
RDMA/vmw_pvrdma: Use refcount_t instead of atomic_t
RDMA/vmw_pvrdma: Use more specific sizeof in kcalloc
RDMA/vmw_pvrdma: Clarify QP and CQ is_kernel logic
RDMA/vmw_pvrdma: Add UAR SRQ macros in ABI header file
i40iw: Change accelerated flag to bool
Currently there are no users of ib_find_gid for RoCE transport. It is
only used by IPoIB.
Therefore its simplified to ignore RoCE ports and GID type check which
was previously done for every port.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Once infiniband is compiled as a core component its subsystem must be
enabled before device initialization. Otherwise there is a NULL pointer
dereference during mlx4_core init, calltrace:
->device_add
if (dev->class) {
deref dev->class->p =>NULLPTR
#Config
CONFIG_NET_DEVLINK=y
CONFIG_MAY_USE_DEVLINK=y
CONFIG_MLX4_EN=y
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
IB CM calls ib_modify_port() irrespective of link layer. If the
failure is returned, the mad agent gets unregistered for those
devices. Recently, modify_port() hook was removed from some of the
low level drivers as it was always returning success. This breaks
rdma connection establishment over those devices.
For ethernet devices, Qkey violation and port capabilities are not
applicable. So returning success for RoCE when modify_port hook is
is not implemented.
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The functions ib_register_event_handler() and
ib_unregister_event_handler() always returned success and they can't fail.
Let's convert those functions to be void, remove redundant checks and
cleanup tons of goto statements.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If a message comes in and we do not have the client in the table, then
try to load the module supplying that client using MODULE_ALIAS to find
it.
This duplicates the scheme seen in other netlink muxes (eg nfnetlink).
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Merging our (hopefully) final -rc pull branch into our for-next branch
because some of our pending patches won't apply cleanly without having
the -rc patches in our tree.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Conflicts:
drivers/infiniband/core/iwcm.c - The rdma_netlink patches in
HEAD and the iwarp cm workqueue fix (don't use WQ_MEM_RECLAIM,
we aren't safe for that context) touched the same code.
Signed-off-by: Doug Ledford <dledford@redhat.com>
ib_clients can indeed fill .add to NULL, but then they will not see
any device removal notifications. The reason is that that
ib_register_client and ib_register_device checked existence of .add
before adding the creating a corresponding client_data and adding
it to the list. Simple condition reverse fixes the issue.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is a need to forward FW version to user space
application through RDMA netlink. In order to make it safe, there
is need to declare nla_policy and limit the size of FW string.
The new define IB_FW_VERSION_NAME_MAX will limit the size of
FW version string. That define was chosen to be equal to
ETHTOOL_FWVERS_LEN, because many drivers anyway are limited
by that value indirectly.
The introduction of this define allows us to remove the string size
from get_fw_str function signature.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Add nldev init and exit flows to the RDMA/core.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
RDMA_NL_LS protocol is actually does not dump anything,
but sets data and it should be handled by doit callback.
This patch actually converts RDMA_NL_LS to doit callback, while
preserving IWCM and RDMA_CM flows through netlink_dump_start().
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
This patch adds static device index in similar fashion to
already available in netdev world (struct net->ifindex).
In downstream patches, the RDMA nelink will use this idx-to-ib_device
conversion, so as part of this commit, we are exposing the translation
function to be visible for IB/core users.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The coming nldev needs to iterate over all IB devices in the system
and in order to not expose the ib_devices list outside the devices.c,
it is necessary to provide function iterator.
Current version is written explicitly for nldev callback to avoid
over-engineering at this stage, but it can be easily extended for
other types.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
The RDMA netlink client infrastructure was removed and made obsolete.
The old infrastructure defined struct ibnl_client_cbs. Now that all
uses of this have been updated to the new infrastructure, rename the
struct to be compliant with the current stack naming standards:
struct rdma_nl_cbs.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Add ability to provide flags to control RDMA netlink callbacks
and convert addr.c and sa_query.c to be first users of such
infrastructure. It allows to move their CAP_NET_ADMIN checks
into netlink core.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
RDMA netlink has a complicated infrastructure for dynamically
registering and de-registering netlink clients to the NETLINK_RDMA
group. The complicated portion of this code is not widely used because
2 of the 3 current clients are statically compiled together with
netlink.c. The infrastructure, therefore, is deemed overkill.
Refactor the code to eliminate the dynamically added clients. Now all
clients are pre-registered in a client array at compile time, and at run
time they merely check-in with the infrastructure to pass their callback
table for inclusion in the pre-sized client array.
This also allows for future cleanups and removal of unneeded code in the
iwcm* netlink handler.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Chien Tin Tung <chien.tin.tung@intel.com>
ib_get_cached_subnet_prefix can technically fail, but the only way it
could is not possible based on the loop conditions. Check the return
value before using the variable sp to resolve a static analysis warning.
-v1:
- Fix check to !ret. Paul Moore
Fixes: 8f408ab64b ("selinux lsm IB/core: Implement LSM notification
system")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Add a generic notificaiton mechanism in the LSM. Interested consumers
can register a callback with the LSM and security modules can produce
events.
Because access to Infiniband QPs are enforced in the setup phase of a
connection security should be enforced again if the policy changes.
Register infiniband devices for policy change notification and check all
QPs on that device when the notification is received.
Add a call to the notification mechanism from SELinux when the AVC
cache changes or setenforce is cleared.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add new LSM hooks to allocate and free security contexts and check for
permission to access a PKey.
Allocate and free a security context when creating and destroying a QP.
This context is used for controlling access to PKeys.
When a request is made to modify a QP that changes the port, PKey index,
or alternate path, check that the QP has permission for the PKey in the
PKey table index on the subnet prefix of the port. If the QP is shared
make sure all handles to the QP also have access.
Store which port and PKey index a QP is using. After the reset to init
transition the user can modify the port, PKey index and alternate path
independently. So port and PKey settings changes can be a merge of the
previous settings and the new ones.
In order to maintain access control if there are PKey table or subnet
prefix change keep a list of all QPs are using each PKey index on
each port. If a change occurs all QPs using that device and port must
have access enforced for the new cache settings.
These changes add a transaction to the QP modify process. Association
with the old port and PKey index must be maintained if the modify fails,
and must be removed if it succeeds. Association with the new port and
PKey index must be established prior to the modify and removed if the
modify fails.
1. When a QP is modified to a particular Port, PKey index or alternate
path insert that QP into the appropriate lists.
2. Check permission to access the new settings.
3. If step 2 grants access attempt to modify the QP.
4a. If steps 2 and 3 succeed remove any prior associations.
4b. If ether fails remove the new setting associations.
If a PKey table or subnet prefix changes walk the list of QPs and
check that they have permission. If not send the QP to the error state
and raise a fatal error event. If it's a shared QP make sure all the
QPs that share the real_qp have permission as well. If the QP that
owns a security structure is denied access the security structure is
marked as such and the QP is added to an error_list. Once the moving
the QP to error is complete the security structure mark is cleared.
Maintaining the lists correctly turns QP destroy into a transaction.
The hardware driver for the device frees the ib_qp structure, so while
the destroy is in progress the ib_qp pointer in the ib_qp_security
struct is undefined. When the destroy process begins the ib_qp_security
structure is marked as destroying. This prevents any action from being
taken on the QP pointer. After the QP is destroyed successfully it
could still listed on an error_list wait for it to be processed by that
flow before cleaning up the structure.
If the destroy fails the QPs port and PKey settings are reinserted into
the appropriate lists, the destroying flag is cleared, and access control
is enforced, in case there were any cache changes during the destroy
flow.
To keep the security changes isolated a new file is used to hold security
related functionality.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Acked-by: Doug Ledford <dledford@redhat.com>
[PM: merge fixup in ib_verbs.h and uverbs_cmd.c]
Signed-off-by: Paul Moore <paul@paul-moore.com>
This workqueue is used by our storage target mode ULPs
via the new CQ API. Recent observations when working
with very high-end flash storage devices reveal that
UNBOUND workqueue threads can migrate between cpu cores
and even numa nodes (although some numa locality is accounted
for).
While this attribute can be useful in some workloads,
it does not fit in very nicely with the normal
run-to-completion model we usually use in our target-mode
ULPs and the block-mq irq<->cpu affinity facilities.
The whole block-mq concept is that the completion will
land on the same cpu where the submission was performed.
The fact that our submitter thread is migrating cpus
can break this locality.
We assume that as a target mode ULP, we will serve multiple
initiators/clients and we can spread the load enough without
having to use unbound kworkers.
Also, while we're at it, expose this workqueue via sysfs which
is harmless and can be useful for debug.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>--
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that the following error message is reported on the console
while loading an RDMA driver with I/O MMU support enabled:
DMAR: Allocating domain for mlx5_0 failed
Ensure that DMA mapping operations that use to_pci_dev() to
access to struct pci_dev see the correct PCI device. E.g. the s390
and powerpc DMA mapping operations use to_pci_dev() even with I/O
MMU support disabled.
This patch preserves the following changes of the DMA mapping updates
patch series:
- Introduction of dma_virt_ops.
- Removal of ib_device.dma_ops.
- Removal of struct ib_dma_mapping_ops.
- Removal of an if-statement from each ib_dma_*() operation.
- IB HW drivers no longer set dma_device directly.
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reported-by: Parav Pandit <parav@mellanox.com>
Fixes: commit 99db949403 ("IB/core: Remove ib_device.dma_device")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: parav@mellanox.com
Tested-by: parav@mellanox.com
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pull cgroup updates from Tejun Heo:
"Several noteworthy changes.
- Parav's rdma controller is finally merged. It is very straight
forward and can limit the abosolute numbers of common rdma
constructs used by different cgroups.
- kernel/cgroup.c got too chubby and disorganized. Created
kernel/cgroup/ subdirectory and moved all cgroup related files
under kernel/ there and reorganized the core code. This hurts for
backporting patches but was long overdue.
- cgroup v2 process listing reimplemented so that it no longer
depends on allocating a buffer large enough to cache the entire
result to sort and uniq the output. v2 has always mangled the sort
order to ensure that users don't depend on the sorted output, so
this shouldn't surprise anybody. This makes the pid listing
functions use the same iterators that are used internally, which
have to have the same iterating capabilities anyway.
- perf cgroup filtering now works automatically on cgroup v2. This
patch was posted a long time ago but somehow fell through the
cracks.
- misc fixes asnd documentation updates"
* 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (27 commits)
kernfs: fix locking around kernfs_ops->release() callback
cgroup: drop the matching uid requirement on migration for cgroup v2
cgroup, perf_event: make perf_event controller work on cgroup2 hierarchy
cgroup: misc cleanups
cgroup: call subsys->*attach() only for subsystems which are actually affected by migration
cgroup: track migration context in cgroup_mgctx
cgroup: cosmetic update to cgroup_taskset_add()
rdmacg: Fixed uninitialized current resource usage
cgroup: Add missing cgroup-v2 PID controller documentation.
rdmacg: Added documentation for rdmacg
IB/core: added support to use rdma cgroup controller
rdmacg: Added rdma cgroup controller
cgroup: fix a comment typo
cgroup: fix RCU related sparse warnings
cgroup: move namespace code to kernel/cgroup/namespace.c
cgroup: rename functions for consistency
cgroup: move v1 mount functions to kernel/cgroup/cgroup-v1.c
cgroup: separate out cgroup1_kf_syscall_ops
cgroup: refactor mount path and clearly distinguish v1 and v2 paths
cgroup: move cgroup v1 specific code to kernel/cgroup/cgroup-v1.c
...
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes
it was possible to remove the IB DMA mapping code entirely and
switch the RDMA stack to use the core DMA mapping code. This resulted
in a nice set of cleanups, but touched the entire tree. This branch
will be submitted separately to Linus at the end of the merge window
as per normal practice for tree wide changes like this.
-----BEGIN PGP SIGNATURE-----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=e0Si
-----END PGP SIGNATURE-----
Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma DMA mapping updates from Doug Ledford:
"Drop IB DMA mapping code and use core DMA code instead.
Bart Van Assche noted that the ib DMA mapping code was significantly
similar enough to the core DMA mapping code that with a few changes it
was possible to remove the IB DMA mapping code entirely and switch the
RDMA stack to use the core DMA mapping code.
This resulted in a nice set of cleanups, but touched the entire tree
and has been kept separate for that reason."
* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
IB/core: Remove ib_device.dma_device
nvme-rdma: Switch from dma_device to dev.parent
RDS: net: Switch from dma_device to dev.parent
IB/srpt: Modify a debug statement
IB/srp: Switch from dma_device to dev.parent
IB/iser: Switch from dma_device to dev.parent
IB/IPoIB: Switch from dma_device to dev.parent
IB/rxe: Switch from dma_device to dev.parent
IB/vmw_pvrdma: Switch from dma_device to dev.parent
IB/usnic: Switch from dma_device to dev.parent
IB/qib: Switch from dma_device to dev.parent
IB/qedr: Switch from dma_device to dev.parent
IB/ocrdma: Switch from dma_device to dev.parent
IB/nes: Remove a superfluous assignment statement
IB/mthca: Switch from dma_device to dev.parent
IB/mlx5: Switch from dma_device to dev.parent
IB/mlx4: Switch from dma_device to dev.parent
IB/i40iw: Remove a superfluous assignment statement
IB/hns: Switch from dma_device to dev.parent
...
Add code in ib_register_device() for copying the DMA masks. Use
&ib_device.dev in DMA mapping operations instead of dma_device.
Remove ib_device.dma_device because due to this and previous patches
it is no longer used.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Move the ib_device.dev.parent initialization code from
ib_device_register_sysfs() to ib_register_device(). Additionally,
allow HBA drivers to set ib_device.dev.parent without setting
ib_device.dma_device. This is the first step towards removing
ib_device.dma_device.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Added support APIs for IB core to register/unregister every IB/RDMA
device with rdma cgroup for tracking rdma resources.
IB core registers with rdma cgroup controller.
Added support APIs for uverbs layer to make use of rdma controller.
Added uverbs layer to perform resource charge/uncharge functionality.
Added support during query_device uverb operation to ensure it
returns resource limits by honoring rdma cgroup configured limits.
Signed-off-by: Parav Pandit <pandit.parav@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The prints after [k|v][m|z|c]alloc() functions are not needed,
because in case of failure, allocator will print their internal
error prints anyway.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Allow for a common core function to get firmware version strings
from the individual devices.
In later patches this format can then then be used to pass a
properly formated version string through the IPoIB layer.
The problem with the current code in the IPoIB layer is that it is
specific to certain hardware types.
Furthermore, this gives us a common function through which the core
can provide a common sysfs entry. Eventually we may want to
remove the sysfs export but this provides for user space backwards
compatibility.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently ib_query_port always attempts to to read the subnet prefix by
calling ib_query_gid(). For RoCE/iWARP there is no subnet manager and no
subnet prefix. Fix this by querying GID[0] only for IB networks.
Fixes: fad61ad4e7 ('IB/core: Add subnet prefix to port info')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We should return the error code if ib_add_ibnl_clients() fails. The
current code returns success.
Fixes: 735c631ae9 ('IB/core: Register SA ibnl client during ib_core initialization')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is an assumption that rdmacm is used only between nodes
in the same IB subnet, this why ARP resolution can be used to turn
IP to GID in rdmacm.
When dealing with IB communication between subnets this assumption
is no longer valid. ARP resolution will get us the next hop device
address and not the peer node's device address.
To solve this issue, we will check user space if it can provide the
GID of the peer node, and fail if not.
We add a sequence number to identify each request and fill in the GID
upon answer from userspace.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Move SA ibnl client registration to ib_core module init.
This will allow us to register a single client to handle
all RDMA_NL_LS operations and make it SA independent.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Consolidate ib_sa into ib_core, this commit eliminates
ib_sa.ko and makes it part of ib_core.ko
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Consolidate ib_mad into ib_core, this commit eliminates
ib_mad.ko and makes it part of ib_core.ko
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IB address resolution is declared as a module (ib_addr.ko) which loads
itself before IB core module (ib_core.ko).
It causes to the scenario where IB netlink which is initialized by IB
core can't be used by ib_addr.ko.
In order to solve it, we are converting ib_addr.ko to be part of
IB core module.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The subnet prefix is a part of the port_info MAD returned and should be
available at the ib_port_attr struct. We define it here and provide a
default implementation in case the hardware driver does not provide one.
The subnet prefix is required when creating the address vector to access
the SA in networks where GRH must be used.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
1. Replaced printk with appropriate pr_warn, pr_err, pr_info.
2. Removed unnecessary prints around memory allocation failure
which are not required, as reported by the checkpatch script.
Signed-off-by: Parav Pandit <pandit.parav@gmail.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In case of failure returned from query function in
IB device registration, we need to clean IB cache which
was missed.
This change fixes it.
Fixes: 3e153a93a1 ('IB/core: Save the device attributes on the device
structure')
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to support multiple GID types, we need to store the gid_type
with each GID. This is also aligned with the RoCE v2 annex "RoCEv2 PORT
GID table entries shall have a "GID type" attribute that denotes the L3
Address type". The currently supported GID is IB_GID_TYPE_IB which is
also RoCE v1 GID type.
This implies that gid_type should be added to roce_gid_table meta-data.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The copy of the attributes present on the device is now used by all consumers
except for uverbs in case of serving user-space query, where dev->query_device
is called.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This way both the IB core and upper level drivers can access these cached
device attributes rather than querying or caching them on their own.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
