Previously the struct bus_type exported by the host1x infrastructure was
only a very basic skeleton. Turn that implementation into a more full-
fledged bus to support proper probe ordering and power management.
Note that the bus infrastructure needs to be available before any of the
drivers can be registered. This is automatically ensured if all drivers
are built as loadable modules (via symbol dependencies). If all drivers
are built-in there are no such guarantees and the link order determines
the initcall ordering. Adjust drivers/gpu/Makefile to make sure that the
host1x bus infrastructure is initialized prior to any of its users (only
drm/tegra currently).
v2: Fix building host1x and tegra-drm as modules
Reported-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The atomic helpers rely on drm_atomic_state_clear() to reset an atomic
state if a retry is needed due to the w/w mutexes. The subsequent calls
to drm_atomic_get_{crtc,plane,...}_state() would then return the stale
pointers in state->{crtc,plane,...}_states.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the combination of ->enable and ->active it's a bit complicated
to follow what exactly is going on sometimes within a full modeset.
Add debug output to make this all traceable.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
For historical reasons going all the way back to how the Xrandr code
was implemented the semantics of the callbacks used to enable/disable
crtcs and encoders are ... interesting.
But with atomic helpers all that complexity has been binned, with only
a well-defined on/off action left. Unfortunately the names stuck.
Let's fix that by adding enable/disable hooks every, make them the
preferred variant for atomic and update documentations.
Later on we add debug warnings when drivers have deprecated hooks. But
while everything is in-flight with lots of drivers converting to
atomic that's a bit too much - better wait for things to settle a bit
first.
v2: Fix kerneldoc, reported by Wu Fengguang.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cursor plane updates have historically been fully async and mutliple
updates batched together for the next vsync. And userspace relies upon
that. Since implementing a full queue of async atomic updates is a bit
of work lets just recover the cursor specific behaviour with a hint
flag and some hacks to drop the vblank wait.
v2: Fix kerneldoc, reported by Wu Fengguang.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This builds on top of the crtc->active infrastructure to implement
legacy DPMS. My choice of semantics is somewhat arbitrary, but the
entire pipe is enabled as along as one output is still enabled.
Of course it also clamps everything that's not ON to OFF.
v2: Fix spelling in one comment.
v3: Don't do an async commit (Thierry)
v4: Dan Carpenter noticed missing error case handling.
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
This is the infrastructure for DPMS ported to the atomic world.
Fundamental changes compare to legacy DPMS are:
- No more per-connector dpms state, instead there's just one per each
display pipeline. So if you clone either you have to unclone first
if you only want to switch off one screen, or you just switch of
everything (like all desktops do). This massively reduces complexity
for cloning since now there's no more half-enabled cloned configs to
consider.
- Only on/off, dpms standby/suspend are as dead as real CRTs. Again
reduces complexity a lot.
Now especially for backwards compat the really important part for dpms
support is that dpms on always succeeds (except for hw death and
unplugged cables ofc). Which means everything that could fail (like
configuration checking, resources assignments and buffer management)
must be done irrespective from ->active. ->active is really only a
toggle to change the hardware state. More precisely:
- Drivers MUST NOT look at ->active in their ->atomic_check callbacks.
Changes to ->active MUST always suceed if nothing else changes.
- Drivers using the atomic helpers MUST NOT look at ->active anywhere,
period. The helpers will take care of calling the respective
enable/modeset/disable hooks as necessary. As before the helpers
will carefully keep track of the state and not call any hooks
unecessarily, so still no double-disables or enables like with crtc
helpers.
- ->mode_set hooks are only called when the mode or output
configuration changes, not for changes in ->active state.
- Drivers which reconstruct the state objects in their ->reset hooks
or through some other hw state readout infrastructure must ensure
that ->active reflects actual hw state.
This just implements the core bits and helper logic, a subsequent
patch will implement the helper code to implement legacy dpms with
this.
v2: Rebase on top of the drm ioctl work:
- Move crtc checks to the core check function.
- Also check for ->active_changed when deciding whether a modeset
might happen (for the ALLOW_MODESET mode).
- Expose the ->active state with an atomic prop.
v3: Review from Rob
- Spelling fix in comment.
- Extract needs_modeset helper to consolidate the ->mode_changed ||
->active_changed checks.
v4: Fixup fumble between crtc->state and crtc_state.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Not a new type exposed to userspace, just a standard way to create
them since between range, bitmask and enum there's 3 different ways to
pull out a boolean prop.
Also add the kerneldoc for the recently added new prop types, which
Rob forgot all about.
v2: Fixup kerneldoc, spotted by Rob.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
We don't have full atomic modeset support yet, but the "nuclear
pageflip" subset of functionality (i.e., plane operations only) should
be ready. Allow the user to force atomic on for debug purposes, or for
fixed-purpose embedded devices that will only use atomic for plane
updates.
The term 'nuclear' is used here instead of 'atomic' to make it clear
that this doesn't allow full atomic modeset support, just a (very
useful) subset of the atomic functionality.
We'll drop the kernel parameter and unconditionally enable atomic in a
future patch once all of the necessary pieces are in.
v2:
- Use module_param_named_unsafe() (Daniel)
- Simplify comment on DRIVER_ATOMIC guard (Daniel)
v3:
- Make the parameter "nuclear_pageflip" rather than just "nuclear"
for clarity. (Ander)
v4:
- Make the internal variable "nuclear_pageflip" as well as the
command-line option. (Ander)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This will exercise our atomic pipeline for legacy property updates.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The atomic helpers need these to prepare a new state object when
starting a new atomic operation.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Even though we only support atomic plane updates at the moment, we still
need to add an .atomic_get_property() entrypoint for connectors before
we allow the driver to flip on the DRIVER_ATOMIC bit. As soon as that
bit gets set, the DRM core will start adding atomic connector properties
(in addition to the plane properties we care about at the moment), so we
need to be able to handle the new way the DRM core will interact with
us.
For simplicity, we just lookup driver-specific connector properties in
the usual shadow array maintained by the core. Once we get real atomic
modeset support for crtc's and planes, this code should be re-written to
pull the data out of crtc/connector state structures.
v2: Fix intel_dvo and intel_dsi that I missed on the first pass (Ander)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We want to enable/test plane updates via the atomic interface, but as
soon as we flip DRIVER_ATOMIC on, the DRM core will take some atomic
codepaths to lookup properties during drmModeGetConnector() and some of
those codepaths unconditionally dereference connector->state
(specifically when looking up the CRTC ID property in
drm_atomic_connector_get_property()). Create a dummy connector state
for each connector at init time to ensure the DRM core doesn't try to
dereference a NULL connector->state. The actual connector properties
will never be updated or contain useful information, but since we're
doing this specifically for testing/debug of the plane operations (and
only when a specific kernel module option is given), that shouldn't
really matter.
Once we start creating connector states, the DRM core will want to be
able to clean them up for us. We also need to hook up the destruction
entrypoint to the core's helper.
v2: Squash in the patch to set the state destruction hook (Ander & Bob)
v3: Only create dummy connector states when we're actually faking
atomic support. (Ander)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add the top-level atomic entrypoints for check/commit. These won't get
called yet; we still need to either enable the atomic ioctl or switch to
using the non-transitional atomic helpers for legacy operations.
v2:
- Use plane->pipe rather than plane->possible_crtcs while ensuring that
only a single CRTC is in use. Either way will work fine since i915
drm_plane's are always tied to a single CRTC, but plane->pipe is
slightly more intuitive. (Ander)
- Simplify crtc/connector checking logic. (Ander)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When we flip on the DRIVER_ATOMIC bit, the DRM core will start calling
this entrypoint to set and lookup driver-specific plane property values,
rather than maintaining a shadow copy in object->properties.
Note that although we add these functions to the plane vtable, they will
not yet be called. Future patches that switch our .set_property()
handler and/or enable full atomic functionality are required before
these code paths will be executed.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
All of the previous refactoring/consolidation of plane code has resulted
in intel_primary_plane_funcs, intel_cursor_plane_funcs, and
intel_sprite_plane_funcs being identical. Replace all of these with a
single 'intel_plane_funcs' vtable for simplicity.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Runtime state that can be manipulated via properties should now go in
intel_plane_state/drm_plane_state so that it can be tracked as part of
an atomic transaction.
We add a new 'intel_create_plane_state' function so that the proper
initial value for this property (and future properties) doesn't have to
be repeated at each plane initialization site.
v2:
- Stick rotation in common drm_plane_state rather than
intel_plane_state. (Daniel)
- Add intel_create_plane_state() to consolidate the places where we
have to set initial state values. (Ander)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Replace all the vlv_gpu_freq(), vlv_freq_opcode(),
*GT_FREQUENCY_MULTIPLIER, and /GT_FREQUENCY_MULTIPLIER instances
with intel_gpu_freq() and intel_freq_opcode() calls.
Most of the change was performed with the following semantic patch:
@@
expression E;
@@
(
- E * GT_FREQUENCY_MULTIPLIER
+ intel_gpu_freq(dev_priv, E)
|
- E *= GT_FREQUENCY_MULTIPLIER
+ E = intel_gpu_freq(dev_priv, E)
|
- E /= GT_FREQUENCY_MULTIPLIER
+ E = intel_freq_opcode(dev_priv, E)
|
- do_div(E, GT_FREQUENCY_MULTIPLIER)
+ E = intel_freq_opcode(dev_priv, E)
)
@@
expression E1, E2;
@@
(
- vlv_gpu_freq(E1, E2)
+ intel_gpu_freq(E1, E2)
|
- vlv_freq_opcode(E1, E2)
+ intel_freq_opcode(E1, E2)
)
@@
expression E1, E2, E3, E4;
@@
(
- if (IS_VALLEYVIEW(E1)) {
- E2 = intel_gpu_freq(E3, E4);
- } else {
- E2 = intel_gpu_freq(E3, E4);
- }
+ E2 = intel_gpu_freq(E3, E4);
|
- if (IS_VALLEYVIEW(E1)) {
- E2 = intel_freq_opcode(E3, E4);
- } else {
- E2 = intel_freq_opcode(E3, E4);
- }
+ E2 = intel_freq_opcode(E3, E4);
)
One hunk was manually undone as intel_gpu_freq() ended up
calling itself. Supposedly it would be possible to exclude
certain functions via !=~, but I couldn't get that to work.
Also the removal of vlv_gpu_freq() and vlv_opcode_freq() compat
wrappers was done manually.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rename the vlv_gpu_freq() and vlv_freq_opecode() functions to have
an intel_ prefix, and handle non-VLV/CHV platforms in them as well.
Leave the vlv_ names around for now since they're currently used.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently the 'gt_cur_freq_mhz' file shows the actual GPU frequency on
VLV/CHV, and the last requested frequency on other platforms. Change the
meaning of the file on VLV/CHV to follow the the other platforms, and
introduce a new file 'gt_act_freq_mhz' which shows the actual frequency
on all platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently we don't call valleyview_set_rps() when changing the min/max
limits through sysfs if the current frequency is still within the new
limits. However that means we sometimes forget to update PMINTRMSK.
Eg. if the current frequency is at the old minimum, and then we reduce
the minum further we should then enable the 'down' interrupts in PMINTRMSK
but currently we don't.
Fix it up by always calling valleyview_set_rps() (just like we do for
!vlv/chv platforms). This also allows the code to be simplified a bit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Calls have been added to invalidate/flush DRRS whenever invalidate/flush is
called as part of frontbuffer tracking.
Apart from calls as a result of GEM tracking to fb invalidate/flush, a
call has been added to invalidate fb obj from crtc_page_flip as well. This
is to track busyness through flip calls.
The call to fb_obj_invalidate (in flip) is placed before queuing flip for this
obj.
drrs_invalidate() and drrs_flush() check for drrs.dp which would be NULL if
it was setup in drrs_enable(). This covers for the condition when DRRS is
not supported.
v2: Removing the call to invalidate_drrs from page_flip.
This has not been tested on Android yet, but, in case DRRS transtions do not
work as expected, check by adding back this call in page_flip.
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Calling enable/disable DRRS when enable/disable DDI are called.
These functions are responsible for setup of drrs data (in enable) and
reset of drrs (in disable).
has_drrs is true when downclock_mode is found and SEAMLESS_DRRS is set in
the VBT. A check has been added for has_drrs in these functions, to make
sure the functions go through only if DRRS will work on the platform with
the attached panel.
V2: [By Ram]: WARN_ON is used when intel_edp_drrs_enable() is called more than
once [Rodrigo]
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add DRRS work function to trigger a switch to low refresh rate,
when no activity is detected on screen till 1 sec duration.
v2: [By Ram]: drrs.dp also protected with drrs.mutex and worker function
is renamed to intel_edp_drrs_downclock_work [Chris]
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Self-explanatory code is better code.
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Const is good for you. No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Remove all the trivial and/or dummy callbacks from intel dsi device
ops. Merge send_otp_cmds into panel_reset as they're called back to
back.
This will be helpful for switching to use drm_panel for the
callbacks. If we ever need the additional callbacks, we should add them
to drm_panel funcs.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
[danvet: Resolve tiny conflict with ongoing atomic work.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add port parameter to wait_for_dsi_fifo_empty, and call it for each dsi
port.
We can now remove the transitional intel_dsi_pipe_to_port() function.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
wait_for_dsi_fifo_empty can be static in intel_dsi.c. No functional
changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This seems like the right thing to do. This also gets rid of a call to
intel_dsi_pipe_to_port() which we want to remove eventually.
v2: add braces to fix else logic (Shobhit)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Instead of having the for each dsi port loop within dpi_send_cmd(), add
a port parameter to the function and call it for each port instead.
This is a rewrite of
commit 4510cd779e
Author: Gaurav K Singh <gaurav.k.singh@intel.com>
Date: Thu Dec 4 10:58:51 2014 +0530
drm/i915: Dual link needs Shutdown and Turn on packet for both ports
to add more flexibility in using dpi_send_cmd() for just one port as
necessary. No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We set the WIZ hashing mode to 16x4 for all the other gen6+
platfotrms, so let's follow suit on VLV.
My VLV is AWOL currently so I didn't test this, but since the results
for all the other platforms agree that 16x4 is the fastest we might
assume the same holds for VLV.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I ran a few tests with xonotic and synmark2 trying out the
different WIZ hashing modes on CHV. The results seem to match the
results I got with IVB/HSW when I did the similar tests on them
in the past. That is 16x4 is generally the fastest mode, 8x8 comes
next and finally 8x4. On CHV the difference between the modes is
at most ~1% in most tests. IIRC on IVB/HSW the difference was a little
bigger, but as there doesn't seem to be any real downside to 16x4
let's use it by default.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Drop WaDisablePwrmtrEvent:chv as it's no longer needed.
Also remove the WaSetMaskForGfxBusyness:chv note, but we still
leave the GEN6_RP_MEDIA_IS_GFX bit enabled as that's still the
recommended setting.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Wa4x4STCOptimizationDisable got only implemented for BDW, but according
to the w/a database CHV needs it too, so add it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We can push down the decision whether to force flushing into the
implementation since in all places that matter obj->pin_display is
accurate already. The only place where the optimization really matters
is the sw_finish_ioctl, and that already checks for obj->pin_display
on its own.
I suspect that this was simply an artifact of how
commit 2c22569bba
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Aug 9 12:26:45 2013 +0100
drm/i915: Update rules for writing through the LLC with the cpu
evolved - only v2 added the pin_display tracking.
Note that we still retain the gist of this logic from the above commit
with the explicit force argument for the low-level clflush function.
Ville noted in his review that there's a slight behavioural change in
the set_to_gtt_domain function, which now also will flush display
plane data. This opens-open the potential for userspace to start doing
buggy things by omitting the sw_finish_ioctl, which is why I've
rejected a functional equivalent patch from Ville a while ago:
http://lists.freedesktop.org/archives/intel-gfx/2013-November/036421.html
But on second consideration it's not that evil, and in any case the
justification here is more clarity, not allowing crazy userspace.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Smatch doesn't like:
struct drm_framebuffer *fb;
fb = kzalloc(sizeof(struct intel_framebuffer), GFP_KERNEL);
and warns with:
warn: struct type mismatch 'drm_framebuffer vs intel_framebuffer'
This implicit cast was correct as struct intel_framebuffer has struct
drm_framebuffer as its first member, but in case someone want to reorder
the fields for some reason, it's slightly safer to access the underlying
drm_framebuffer through intel_fb->base.
Also, having fewer static analysis warnings is a worthy goal.
Cc: kbuild@01.org
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently we are hitting the WARN inside
i915_gem_object_set_cache_level() as we can now have an unbound object
in the GTT write domain (due to 43566dedde "drm/i915: Broaden
application of set-domain(GTT)"). To avoid the warning, we need to track
when we elided the clflush on a cacheable object and then evict the
cache for the object when we move the object out of a cacheable domain.
Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Testcase: igt/gem_mmap_wc/set-cache-level
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88607
Tested-by: huax.lu@intel.com
[danvet: Split if into nested if as discussion on the m-l.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We increase it when we pin, so for the casual reader
rename it to cause less confusion.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We pin when we submit to execlist queue. Balance
the pinning when the submitted queue is cleaned on reset.
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This will let userland only try to use the new ring
when the appropriate kernel is present
v2: change the number to be consistent with upstream (Zhipeng)
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Reviewed--by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On Skylake GT3 we have 2 Video Command Streamers (VCS), which is asymmetrical.
For example, HEVC GPU commands can be only dispatched to VCS1 ring.
But userspace has no control when using VCS1 or VCS2. This patch introduces
a mechanism to avoid the default ping-pong mode and use one specific ring
through execution flag. This mechanism is usable for all the platforms
with 2 VCS rings.
The open source usage is from these two commits in vaapi/intel:
commit 702050f04131a44ef8ac16651708ce8a8d98e4b8
Author: Zhao, Yakui <yakui.zhao@intel.com>
Date: Mon Nov 17 12:44:19 2014 +0800
Allow the batchbuffer to be submitted with override flag
commit a56efcdf27d11ad9b21664b4a2cda72d7f90f5a8
Author: Zhao Yakui <yakui.zhao@intel.com>
Date: Mon Nov 17 12:44:22 2014 +0800
Add the override flag to assure that HEVC video command
always uses BSD ring0 for SKL GT3 machine
v2: fix whitespace (Rodrigo)
v3: remove incorrect chunk that came on -collector rebase. (Rodrigo)
v4: change the comment (Zhipeng)
v5: address Daniel's comment (Zhipeng)
Signed-off-by: Zhipeng Gong <zhipeng.gong@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This vfunc and related structure are only used for fast boot, so let's
rename them to not take them as general purpose ones.
v2: Fix conflicts caused by the introduction of struct intel_crtc_state
Reviewed-By: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v1)
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Universal planes have changed a bit the register organization.
v2: Rebase on top of the latest drm-intel-nightly
v3: Use PLANE_SIZE to retrieve the fb size (Tvrtko)
Don't use BUG() (Tvrtko)
v4: Use MISSING_CASE (Daniel)
Reviewed-By: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We will have a skl_ version shortly!
Reviewed-By: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We may as well try to be consistent everywhere and know the pipes by
their name.
Reviewed-By: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
crtc->plane can only be different from crtc->pipe pre-Gen4. Don't use it
in new-ish code.
Reviewed-By: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
crtc->base.primary->fb was used everywhere. Use fb to temporarily point
there and don't forget to assign fb to its final destination at the end.
v2: Rebase on top of misc changes (mask of DSPSURF, PAGE_ALIGN)
Reviewed-By: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
