There are no typedefs left in this file, so no need for a comment
pointing out the typedefs.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These are enums that are not used anywhere at this time.
This removes the typedef, but leaves the enum in place.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A more descriptive structure name is probably in order here.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes usbdux semaphores initialization
from init function as they are initialized later on in
probe function. Also remove init_usb_devices() as it is
not needed anymore.
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Bernd Porr <BerndPorr@f2s.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes explicit zeroing of usbduxsub
variable on init because it is in .bss section.
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Bernd Porr <BerndPorr@f2s.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes usbduxfast semaphores initialization
from init function as they are initialized later on in
probe function. Also remove init_usb_devices() as it is
not needed anymore.
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Bernd Porr <BerndPorr@f2s.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes explicit zeroing of usbduxfastsub
variable on init because it is in .bss section.
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Bernd Porr <BerndPorr@f2s.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If debugging is enabled, this printk will oops, fix that issue.
From: Bernd Porr <BerndPorr@f2s.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This can happen if other minor devices are used.
From: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix GCC warning in call to request_module(): "format not a string
literal and no format arguments".
From: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix redefinition of macro comedi_rt_task_context_t
From: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Return error instead of segfaulting if user trys to run comedi_config on
a device file with and invalid minor number.
From: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Otherwise it would not work properly.
From: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
usbdux and usbduxfast upload now their firmware via the firmware kernel
meachanism. No udev rules are needed for that except the default ones.
The firmware will usually be loaded from /lib/firmware. Upload via
comedi_config is still possible for static comedi devices
(comedi_num_legacy_minors>0).
Frank, thanks for the example code which sped up rewriting of the code
substantially.
From: Bernd Porr <BerndPorr@f2s.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This will be used by the usbdux and usbduxfast drivers.
From: Bernd Porr <BerndPorr@f2s.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As suggested the legacy device count is set to zero. A new module
parameter for comedi_fops allows setting the number of legacy devices:
comedi_num_legacy_minors. The default is zero.
From: Bernd Porr <BerndPorr@f2s.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Set it to 0 or 'N' to disable autoconfiguration.
It is enabled by default.
From: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed bug in firmware loading with multiple usbduxfast boards.
From: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Added PXI-6224 based on report by Romain Bossart of equivalence to PCI-6224.
From: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nothing is done with it yet, eventually it will be made available to
user-space via a readable file in sysfs.
From: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Coding style cleanups, but it needs some rework to make it sane.
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clean up lots of coding style issues in the addi-data header
files.
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds all of the recently added drivers to the build system.
Also splits out the pcmcia drivers so we don't get build errors when we
don't want to.
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for PCM3730 and clones
From: Blaine Lee <blee@tellurian-inc.com>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for PCI-DIO24H & PCI-DIO48H of ComputerBoards (currently
MeasurementComputing)
From: Yoshiya Matsuzaka <matsuzay@mail.cc.tohoku.ac.jp>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Mechatronic Systems Inc. C6x_DIGIO DSP daughter card
Written by Dan Block, email address unknown
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for DataTranslation DT3000 devices
From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for DataTranslation DT2821 series cards
From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for DataTranslation DT2817
From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for DataTranslation DT2815
From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for DataTranslation DT2814
From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for DataTranslation DT2811
From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for DataTranslation DT2801
From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for National Instruments PCMCIA DAQ-Card DIO-24
From: Daniel Vecino Castel <dvecino@able.es>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for National Instruments PCMCIA DAQCard-700 DIO only
From: Fred Brooks <nsaspook@nsaspook.com>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for National Instruments AT-MIO16D board
From: Chris R. Baugher <baugher@enteract.com>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for National Instruments AT-A2150
From: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for DAS16 compatible boards
From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Keitley das800 series boards and compatibles
From: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Keitley das1700/das1800 series boards
From: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for National Instruments PCI-DIO-96/PCI-6508, PCI-DIO-32HS, and
PCI-6503 cards.
From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for National Instruments AT-AO-6/10 cards
From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for National Instruments 670x
From: Bart Joris <bjoris@advalvas.be>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for National Instruments 660x counter/timer boards (PCI-6601,
PCI-6602, PXI-6602, and PXI-6608)
From: J.P. Mellor <jpmellor@rose-hulman.edu>
Cc: Herman Bruyninckx <Herman.Bruyninckx@mech.kuleuven.ac.be>
Cc: Wim Meeussen <Wim.Meeussen@mech.kuleuven.ac.be>
Cc: Klass Gadeyne <Klaas.Gadeyne@mech.kuleuven.ac.be>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for National Instruments PCI-6514
From: Jon Grierson <jd@renko.co.uk>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for National Instruments PCI-6527
From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver Advantech PCM-3724 card
From: Drew Csillag <drew_csillag@yahoo.com>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for the ComputerBoards / MeasurementComputing PCI-DDA series.
From: Ivan Martinez <ivanmr@altavista.com>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for the ComputerBoards/MeasurementComputing PCI-DAS
64xx, 60xx, and 4020 cards.
From: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Advantech PCL-816 and PCL-814
From: Juan Grigera <juan@grigera.com.ar>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Advantech PCL-730 & compatibles
From: José Luis Sánchez <jsanchezv@teleline.es>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Advantech PCL-726 & compatibles
From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Advantech PCL-725 & compatibles
From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Drivers for Winsystems PC-104 based multifunction IO board and 48
channel and 98 channel dio boards
From: Calin Culianu <calin@ajvar.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Diamond Systems mm32at
From: Perry J. Piplani <perry.j.piplani@nasa.gov>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
bus_id is going away, so don't use it.
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Measurement Computing CIO-DAS16/M1
From: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Computer Boards PC-CARD DAS16/16
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Amplicon PCI230 and PCI260 Multifunction I/O boards
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Steve D Sharples <steve.sharples@nottingham.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Amplicon PCI224 and PCI234 AO boards
From: Ian Abbott <abbotti@mev.co.uk>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Amplicon PC263 and PCI263 relay boards
From: Ian Abbott <abbotti@mev.co.uk>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Amplicon PC272E and PCI272 DIO boards
From: Ian Abbott <abbotti@mev.co.uk>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Acces I/O Products PC-104 IIRO16 Relay And Isolated Input
Board
From: Zachary Ware <zach.ware@cctechnol.com>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diver for Acces I/O Products PC-104 AIO12-8 Analog I/O Board
From: Pablo Mejia <pablo.mejia@cctechnol.com>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
driver for Advantech PCI-1723 device
From: Ian Abbott <abbotti@mev.co.uk>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Only error out on unexpected fifo size.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Dan Christian <dac@ptolemy.arc.nasa.gov>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds __init and __exit annotations to proper functions in the
usbduxfast driver.
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Bernd Porr <BerndPorr@f2s.com>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch is a major code rewrite to make checkpatch.pl happy and also
other minor things are fixed.
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Bernd Porr <BerndPorr@f2s.com>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch moves CONFIG_COMEDI_DEBUG to Kconfig and cleans up the code
as it didn't actually compile with debug enabled.
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Bernd Porr <BerndPorr@f2s.com>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes kernel version checks from usbduxfast driver as the
driver is in the main kernel tree now.
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Bernd Porr <BerndPorr@f2s.com>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
hardware driver for IOtech DAQboard/2000
From: Anders Blomdell <anders.blomdell@control.lth.se>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
hardware driver for PC-LabCard PCL-711 and AdSys ACL-8112
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Janne Jalkanen <jalkanen@cs.hut.fi>
Cc: Eric Bunn <ebu@cs.hut.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hardware driver for Winsystems PCM-A/D12 and PCM-A/D16
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Winsystems PC-104 based PCM-D/A-12 8-channel AO board.
From: Calin Culianu <calin@ajvar.org>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Common code for DAQ-STC based boards. Other drivers #include
this file to take advantage of the functions here.
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
driver for Contec PIO1616L digital I/O board
From: Stefano Rivoir <s.rivoir@gts.it>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
driver for digital I/O pins on the MPC 8260 CPM module
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
driver for a Micro/sys inc. MPC-624 PC/104 board
From: Stanislaw Raczynski <sraczynski@op.pl>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
driver for Kolter-Electronic PCI Counter 1 Card
From: Michael Hillmann <hillmann@syscongroup.de>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Intelligent Instruments PCI-20001C carrier board
and modules.
From: Markus Kempf <kempf@matsci.uni-sb.de>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for the General Standards Corporation High Speed Parallel Digital
Interface rs485 boards.
From: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for FL512 board
From: Anders Gnistrup <ex18@kalman.iau.dtu.dk>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hardware driver for Quanser Consulting MultiQ-3 board
From: Anders Blomdell <anders.blomdell@control.lth.se>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mini-drivers for POC (Piece of crap) boards. Currently
supports:
Keithley Metrabyte DAC-02
Advantech PCL-733, PCL-734
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Quatech DAQP PCMCIA data capture cards
From: Brent Baccala <baccala@freesoft.org>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Analog Devices RTI-802 board
From: Anders Blomdell <anders.blomdell@control.lth.se>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For Sensoray 526 devices
From: Everett Wang <everett.wang@everteq.com>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For Advantech cards:
PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818, PCL-718
From: Michal Dobes <dobes@tesnet.cz>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
hardware driver for Advantech cards:
PCL-812, PCL-812PG, PCL-813, PCL-813B
and for ADlink cards:
ACL-8112DG, ACL-8112HG, ACL-8112PG, ACL-8113, ACL-8216
and for ICP DAS cards:
ISO-813, A-821PGH, A-821PGL, A-821PGL-NDA, A-822PGH, A-822PGL,
A-823PGH, A-823PGL, A-826PG
From: Michal Dobes <dobes@tesnet.cz>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for the Adlink PCI-7296 96 ch. digital io board
From: Jon Grierson <jd@renko.co.uk>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for serial connected hardware
From: Anders Blomdell <anders.blomdell@control.lth.se>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Example skeleton comedi driver
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
driver for SSV Embedded Systems' DIL/Net-PCs
From: Robert Schwebel <robert@schwebel.de>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for Fastwel UNIOxx-5 (analog and digital i/o) boards
From: Kruchinin Daniil <asgard@etersoft.ru>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
driver for MicroAxial ADQ12-B data acquisition and control card
From: Jeremy Theler <thelerg@ib.cnea.gov.ar>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for the Adlink PCI-8164 4 Axes Motion Control board
board
From: Michel Lachaine <mike@mikelachaine.ca>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for the Adlink PCI-7432 64 ch. isolated digital io board
From: Michel Lachaine <mike@mikelachaine.ca>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
virtual driver for using RTL timing sources
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
hardware driver for JR3/PCI force sensor board
From: Anders Blomdell <anders.blomdell@control.lth.se>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hardware driver for NI PCMCIA MIO E series cards
Supports DAQCard-AI-16XE-50 (ni_mio_cs), DAQCard-AI-16E-4,
DAQCard-6062E, DAQCard-6024E, DAQCard-6036E
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hardware driver for NI AT-MIO E series cards
Supports the AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10,
AT-MIO-64E-3, AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10 cards
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This supports National Instruments Lab-PC and compatibles
From: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For MeasurementComputing PCI-DAS series with the AMCC S5933 PCI
controller
From: Ivan Martinez <imr@oersted.dtu.dk>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For Advantech cards:
PCI-1710, PCI-1710HG, PCI-1711, PCI-1713, PCI-1720,
From: Michal Dobes <dobes@tesnet.cz>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For ADLink cards:
PCI-9118DG, PCI-9118HG, PCI-9118HR
From: Michal Dobes <dobes@tesnet.cz>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is used for any AMCC S5933 PCI controller code
From: Michal Dobes <dobes@tesnet.cz>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These drivers are used to support National Instruments general purpose
counters and commands.
From: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: J.P. Mellor <jpmellor@rose-hulman.edu>
Cc: Herman Bruyninckx <Herman.Bruyninckx@mech.kuleuven.ac.be>
Cc: Wim Meeussen <Wim.Meeussen@mech.kuleuven.ac.be>
Cc: Klass Gadeyne <Klaas.Gadeyne@mech.kuleuven.ac.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For Measurement Computing PCI Migration series boards
From: Richard Bytheway <mocelet@sucs.org>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
for Amplicon PC36AT and PCI236 devices
From: Ian Abbott <abbotti@mev.co.uk>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is used by multiple comedi drivers.
It is the definitions for the PLX-9052 PCI interface chip
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
for Analog Devices RTI-800/815 devices
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For ADLink PCI-6208A devices
From: nsyeow <nsyeow@pd.jaring.my>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For Adlink NuDAQ ACL-7225b & compatibles
From: José Luis Sánchez <jsanchezv@teleline.es>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The classic in digital I/O.
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is needed by a bunch of different comedi drivers.
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the addi-data family of comedi drivers to the staging tree
From: ADDI-DATA GmbH <info@addi-data.com>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If the NULL test is necessary, then the dereference should be moved below
the NULL test.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/).
// <smpl>
@disable is_null@
identifier f;
expression E;
identifier fld;
statement S;
@@
+ if (E == NULL) S
f(...,E->fld,...);
- if (E == NULL) S
@@
identifier f;
expression E;
identifier fld;
statement S;
@@
+ if (!E) S
f(...,E->fld,...);
- if (!E) S
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Error handling code following a kmalloc should free the allocated data.
The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,l;
position p1,p2;
expression *ptr != NULL;
@@
(
if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S
|
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
)
<... when != x
when != if (...) { <+...x...+> }
x->f = E
...>
(
return \(0\|<+...x...+>\|ptr\);
|
return@p2 ...;
)
@script:python@
p1 << r.p1;
p2 << r.p2;
@@
print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
SPIN_LOCK_UNLOCKED is deprecated. The following makes the change suggested
in Documentation/spinlocks.txt
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
declarer name DEFINE_SPINLOCK;
identifier xxx_lock;
@@
- spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED;
+ DEFINE_SPINLOCK(xxx_lock);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
0x20 has 0 as its rightmost bit and thus !inl(info->plx_regbase +
PLX_INTCSR) & 0x20 is always 0. I assume that !(!inl(info->plx_regbase +
PLX_INTCSR) & 0x20) was intended.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@ expression E; constant C; @@
(
!E & !C
|
- !E & C
+ !(E & C)
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
phison uses PCI interfaces, so it should depend on PCI.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Evan Ko <evan_ko@phison.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
phison is an ATA driver, not a classic IDE driver, so fix the Kconfig file
so that it will build.
drivers/staging/phison/phison.c:43: error: implicit declaration of function 'ATA_BMDMA_SHT'
drivers/staging/phison/phison.c:43: error: initializer element is not constant
drivers/staging/phison/phison.c:43: error: (near initialization for 'phison_sht.module')
drivers/staging/phison/phison.c:47: error: 'ata_bmdma_port_ops' undeclared here (not in a function)
drivers/staging/phison/phison.c:65: error: implicit declaration of function 'ata_pci_sff_init_one'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This brings the driver up to modern times so that it can build and run
properly with the in-tree libata code.
Cc: Evan Ko <evan_ko@phison.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Minor touchups to fix up the coding style issues in the phison driver.
Cc: Evan Ko <evan_ko@phison.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It doesn't build properly yet as it is against an older kernel version.
That will be fixed up in patches following this.
From: Evan Ko <evan_ko@phison.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
- Basically, update driver to run with 2.6.28
- Conversion from struct class_device to struct device.
- Conversion from .nopfn to .fault in vm_operations_struct.
- Update use of pci_resource_flags to check for IORESOURCE_SIZEALIGN.
- Update use of pci_dma_mapping_error.
- Minor code cleanup and integration with kernel build system.
Signed-off-by: Justin Bronder <jsbronder@brontes3d.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Initial b3dfg driver development as preformed by Daniel Drake. All
basic functionality is completed.
Signed-off-by: Justin Bronder <jsbronder@brontes3d.com>
Cc: Daniel Drake <ddrake@brontes3d.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Convert to use the dbg() macro we already have in the usb-serial layer.
This also turns off the default for the driver to spit out all of the
debug messages, now it is controlled by the module parameter.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Name it something sane, and fix up the code to be cleaner.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Name it something sane, and fix up the code to be cleaner.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Name it something sane, and fix up the code to be cleaner.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Name it something sane, and fix up the code to be cleaner.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This makes them smaller, and fixes the name of the serial driver
structure.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the driver was copied from another one, there are lots of fields that
are unused due to the hardware being different. Remove a bunch of them,
more will be removed later.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Reorginize functions to get rid of forward prototypes so they are no
longer needed.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lots of unused and unneeded #defines in this code, so lets remove them.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver was copied from the io_edgeport.c driver, so we need to put
the proper copyright information back on it.
Also, almost all of the function comments are directly from the original
io_edgeport driver, and most of them are either totally wrong now due to
changes, or redundant. So delete them all so no one gets confused by
anything.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As we are wanting to be in the main kernel tree, remove the #ifdef
stuff for different kernel versions.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No need for external .h files for a simple usb-serial driver, move them
into the .c file to make things easier to cleanup.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Many thanks to Russell Lang <gsview@ghostgum.com.au> for his
help in getting this working on newer kernel versions and
for pointing out this driver in the first place.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix staging/stlc45xx printk format warnings:
drivers/staging/stlc45xx/stlc45xx.c:453: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/stlc45xx/stlc45xx.c:509: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/stlc45xx/stlc45xx.c:718: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/stlc45xx/stlc45xx.c:851: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/stlc45xx/stlc45xx.c:857: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/stlc45xx/stlc45xx.c:1508: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds a new driver called stlc45xx, which supports wi-fi chipsets
stlc4550 and stlc4560 from ST-NXP Wireless. The chipset can be found, for
example, from Nokia N800 and N810 products.
The driver is implemented based on the firmware interface information
published by ST-NXP Wireless here:
http://wireless.kernel.org/en/developers/Documentation/specs#STMicroelectronicshardware
Currently only SPI interface is supported.
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/pohmelfs/path_entry.c: In function
'pohmelfs_construct_path_string':
drivers/staging/pohmelfs/path_entry.c:48: error: dereferencing pointer to incomplete type
drivers/staging/pohmelfs/path_entry.c:49: error: dereferencing pointer to incomplete type
drivers/staging/pohmelfs/path_entry.c:50: error: dereferencing pointer to incomplete type
drivers/staging/pohmelfs/path_entry.c: In function 'pohmelfs_path_length':
drivers/staging/pohmelfs/path_entry.c:95: error: dereferencing pointer to incomplete type
drivers/staging/pohmelfs/path_entry.c:96: error: dereferencing pointer to incomplete type
drivers/staging/pohmelfs/path_entry.c:97: error: dereferencing pointer to incomplete type
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
pohmelfs wants to use CONNECTOR, so it selects CONNECTOR,
but when CONFIG_NET is not enabled, connector.c will not build,
since select does not follow the dependency chain.
Selecting NET is not a good idea, since that would build lots
of code that someone seemingly didn't want to build/store
and kconfig shouldn't do that behind someone's back.
pohmelfs should depend on NET since it uses network interfaces.
pohmelfs also uses CRYTPO and selects 2 cipher symbols, but
it should also select the top-level CRYPTO symbol since
kconfig dependency chains are not followed.
(found by inspection)
This allows the POHMELFS_CRYPTO option to depend only on
POHMELFS and makes the kconfig menu align properly.
Also fix minor typos & line lengths in kconfig help text.
Drop CONFIG_* in kconfig symbols in Kconfig file.
connector.c:(.text+0x46003): undefined reference to `kfree_skb'
connector.c:(.text+0x460a6): undefined reference to `kfree_skb'
connector.c:(.text+0x4612b): undefined reference to `kfree_skb'
(.text+0x4624f): undefined reference to `netlink_has_listeners'
(.text+0x4629b): undefined reference to `__alloc_skb'
(.text+0x462ea): undefined reference to `kfree_skb'
(.text+0x46308): undefined reference to `skb_put'
(.text+0x46385): undefined reference to `netlink_broadcast'
(.text+0x7b574): undefined reference to `sock_release'
(.text+0x7b8dd): undefined reference to `sock_create'
(.text+0x7b984): undefined reference to `kernel_connect'
(.text+0x7ba4c): undefined reference to `sock_release'
net.c:(.text+0x7bda4): undefined reference to `kernel_recvmsg'
(.text+0x7ef42): undefined reference to `kernel_sendmsg'
(.text+0x7f057): undefined reference to `kernel_sendpage'
(.text+0x7f1e8): undefined reference to `kernel_sendmsg'
connector.c:(.devinit.text+0x5b): undefined reference to `init_net'
connector.c:(.devinit.text+0x60): undefined reference to `netlink_kernel_create'
connector.c:(.devinit.text+0xc9): undefined reference to `netlink_kernel_release'
connector.c:(.devexit.text+0x2c): undefined reference to `netlink_kernel_release'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/pohmelfs/inode.c:917: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'size_t'
drivers/staging/pohmelfs/inode.c:1036: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'size_t'
drivers/staging/pohmelfs/trans.c:164: warning: format '%u' expects type 'unsigned int', but argument 5 has type '__kernel_size_t'
drivers/staging/pohmelfs/trans.c:170: warning: format '%u' expects type 'unsigned int', but argument 7 has type '__kernel_size_t'
drivers/staging/pohmelfs/trans.c:517: warning: format '%u' expects type 'unsigned int', but argument 6 has type '__kernel_size_t'
drivers/staging/pohmelfs/trans.c:600: warning: format '%u' expects type 'unsigned int', but argument 6 has type '__kernel_size_t'
drivers/staging/pohmelfs/trans.c:610: warning: format '%u' expects type 'unsigned int', but argument 7 has type '__kernel_size_t'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Frank Seidel <frank@f-seidel.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
on Sparc64:
drivers/staging/pohmelfs/net.c:33: error: implicit declaration of function 'vmalloc'
drivers/staging/pohmelfs/net.c:42: error: implicit declaration of function 'vfree'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds Kconfig and Makefile entries and exports to
VFS functions to be used by POHMELFS.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch implements transaction processing helpers
used to allocate/free/insert/remove and other operations
with the transctions.
Each transction is an object, which may embed multiple commands
completed atomically. When server fails the whole transaction will be
replied against it (or different server) later. This approach allows to
maintain high data integrity and do not desynchronize filesystem state
in case of network or server failures.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a main network processing patch. It includes
both low-level socket machinery, zero-copy sending helpers,
receiving and parsing callbacks and mainly logical
commands handlers.
POHMELFS uses async network approach, when every command
can be separated from its answer and received after some
time after the request during which another lots of commands
can be injected into the network and replies to them received.
With read operation balancing between multiple hosts it is possible
that operations will arrive out of order and this is handled
by the transaction mechanism described partially here.
Having a transaction to guard the set of logically compound operations
allows to send data without thinking about its status and using
zero-copy sending mechanism, since transaction will receive explicit
acks from the servers when they are completed.
This patch also contains header with network srtuctures, commands
and short comments on how they are used.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
POHMELFS utilizes writeback cache, which is built on top of MO(E)SI-like
coherency protocol. This patch includes its implementation and cache
object processing helpers (like allocation and completion callbacks).
POHMELFS uses scalable cached read/write locking. No additional requests
are performed if lock is granted to the filesystem. The same protocol
is used by the server to on-demand flushing of the client's cache (for
example when server wants to update local data).
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the main patch which implements inode operations
(like reading and writing) and superblock processing
(filesystem registration, initial autoconfiguration
with the server like permissions, size of the exported
dir, amount of the objects created and so on).
POHMELFS relies on system's writeback cache mechanism
shown here, as long as cache coherency protocol described
later.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch implementes all supported directory operations
like directory reading, object lookup, creation, removal
and so on.
Currently object removal is not optimized at all.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
POHMELFS is able to encrypt the whole network channel or
attach the strong checksum to own packets to catch faulty media.
This patch implements crypto initialization, its autoconfiguration
and sync with the server.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch includes POHMELFS configuration interface based
on the netlink kernel connector. This interface allows to create
configuration groups in the kerenel indexed by mount ID option.
Each configuration group can include multiple servers to work
with and various operation parameters.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
On Mon, Jan 19, 2009 at 10:12:24AM -0800, Randy Dunlap (randy.dunlap@oracle.com) wrote:
>
> DST build fails when CONFIG_BLOCK=n:
DST should depend on block and block device, in the original patch its
kconfig entry was in the BLK_DEV menu, so this dependency was satisfied
automatically. Should attached patch be pushed into drivers/staging?
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Do not allow empty barriers or generic_make_request() -> scsi_setup_fs_cmnd()
will explode
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Added thread pool exit condition into the thread_pool_del_worker(). If
called in parallel another thread can steal
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use bio prepend feature as suggested by Jens Axboe.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
bus_id is going away, use the dev_set_name() function instead.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
DST may fully encrypt the data channel in case of untrusted channel and implement
strong checksum of the transferred data. It is possible to configure algorithms
and crypto keys, they should match on both sides of the network channel.
Crypto processing does not introduce noticeble performance overhead, since DST
uses configurable pool of threads to perform crypto processing.
This patch introduces crypto processing helpers and crypto engine initialization:
glueing with the crypto layer, allocation and initialization of the crypto
processing thread pool, allocation of the cached pages, which are used to temporary
encrypt data into, since it is forbidden to encrypt data in-place, since pages
are used by the higher layers.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
DST uses transaction model, when each store has to be explicitly acked
from the remote node to be considered as successfully written. There
may be lots of in-flight transactions. When remote host does not ack
the transaction it will be resent predefined number of times with specified
timeouts between them. All those parameters are configurable. Transactions
are marked as failed after all resends completed unsuccessfully, having
long enough resend timeout and/or large number of resends allows not to
return error to the higher (FS usually) layer in case of short network
problems or remote node outages. In case of network RAID setup this means
that storage will not degrade until transactions are marked as failed, and
thus will not force checksum recalculation and data rebuild. In case of
connection failure DST will try to reconnect to the remote node automatically.
DST sends ping commands at idle time to detect if remote node is alive.
Because of transactional model it is possible to use zero-copy sending
without worry of data corruption (which in turn could be detected by the
strong checksums though).
Transactions are handled in this patch: allocation/freeing/completion,
scanning for stall and to-be-resent transactions and overall management
of the storing tree.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kernel currently does not allow to queue work into some entity which
will perform it in the process context and have simple way to extend
number of worker and work with them not as separate objects, but with
pool as a whole. So thread pool model was implemented in the DST.
Thread pool abstraction allows to schedule a work to be performed
on behalf of kernel thread. One does not operate with threads itself,
instead user provides setup and cleanup callbacks for thread pool itself,
and action and cleanup callbacks for each submitted work.
Each worker has private data initialized at creation time and data,
provided by user at scheduling time.
When action is being performed, thread can not be used by other users,
instead they will sleep until there is free thread to pick their work.
Thread pool is used for crypto processing of incoming and outgoing IO
requests to reduce the overall overhead.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch introduces remote (export) node machinery: initialization
address/port (and other socket parameters), export block device (can be
another DST storage for example or local device like /dev/sda1), local
IO processing engine (BIO state machines, receiving/submitting logic).
Network management for the export node like accepting new client, scheduling
its command processing thread, receiving/sending IO requests, all are placed
here.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Each DST device contains of two nodes: local and remote (called also as export node).
This patch contains local node processing engine: network state storage,
socket processing loops and state machine, socket polling machinery, reconnection
logic, send/receive basic helpers, related IO commands and so on.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch contains DST core files, which introduce
block layer, connector and sysfs registration glue and main headers.
Connector is used for the configuration of the node (its type, address,
device name and so on). Sysfs provides bits of information about running
devices in the following format:
+/*
+ * DST sysfs tree for device called 'storage':
+ *
+ * /sys/bus/dst/devices/storage/
+ * /sys/bus/dst/devices/storage/type : 192.168.4.80:1025
+ * /sys/bus/dst/devices/storage/size : 800
+ * /sys/bus/dst/devices/storage/name : storage
+ */
DST header contains structure definitions and protocol command description.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
