Patch series "MM changes to improve swap-over-NFS support".
Assorted improvements for swap-via-filesystem.
This is a resend of these patches, rebased on current HEAD. The only
substantial changes is that swap_dirty_folio has replaced
swap_set_page_dirty.
Currently swap-via-fs (SWP_FS_OPS) doesn't work for any filesystem. It
has previously worked for NFS but that broke a few releases back. This
series changes to use a new ->swap_rw rather than ->readpage and
->direct_IO. It also makes other improvements.
There is a companion series already in linux-next which fixes various
issues with NFS. Once both series land, a final patch is needed which
changes NFS over to use ->swap_rw.
This patch (of 10):
Many functions declared in include/linux/swap.h are only used within mm/
Create a new "mm/swap.h" and move some of these declarations there.
Remove the redundant 'extern' from the function declarations.
[akpm@linux-foundation.org: mm/memory-failure.c needs mm/swap.h]
Link: https://lkml.kernel.org/r/164859751830.29473.5309689752169286816.stgit@noble.brown
Link: https://lkml.kernel.org/r/164859778120.29473.11725907882296224053.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zswap has an ability to efficiently store same-value filled pages, which
can be turned on and off using the "same_filled_pages_enabled"
parameter.
However, there is currently no way to enable just this (lightweight)
functionality, while not making use of the whole compressed page storage
machinery.
Add a "non_same_filled_pages_enabled" parameter which allows disabling
handling of pages that aren't same-value filled. This way zswap can be
run in such lightweight same-value filled pages only mode.
Link: https://lkml.kernel.org/r/7dbafa963e8bab43608189abbe2067f4b9287831.1641247624.git.maciej.szmigiero@oracle.com
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is only a single instance of frontswap ops in the kernel, so
simplify the frontswap code by removing support for multiple operations.
Link: https://lkml.kernel.org/r/20211224062246.1258487-13-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the ZSWAP_SWAPCACHE_FAIL and ZSWAP_SWAPCACHE_EXIST case, we forgot to
call zpool_unmap_handle() when zpool can't sleep. And we might sleep in
zswap_get_swap_cache_page() while zpool can't sleep. To fix all of these,
zpool_unmap_handle() should be done before zswap_get_swap_cache_page()
when zpool can't sleep.
Link: https://lkml.kernel.org/r/20210522092242.3233191-4-linmiaohe@huawei.com
Fixes: fc6697a89f ("mm/zswap: add the flag can_sleep_mapped")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The buf mapped via zpool_map_handle() is only used to store compressed
page buffer and there is no information to extract from it. So we could
use ZPOOL_MM_WO instead to avoid unnecessary copy-in at map time.
Link: https://lkml.kernel.org/r/20210522092242.3233191-3-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Cleanup and fixup for zswap".
This series contains cleanups to remove unused function and avoid
unnecessary copy-in at map time. Also this fixes two bugs in the function
zswap_writeback_entry(). More details can be found in the respective
changelogs.
This patch (of 3):
zswap_debugfs_exit() is unused, remove it.
Link: https://lkml.kernel.org/r/20210522092242.3233191-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210522092242.3233191-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as
it also avoids scanning the whole source string.
Link: https://lkml.kernel.org/r/1614227981-20367-1-git-send-email-daizhiyuan@phytium.com.cn
Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Fix the compatibility of zsmalloc and zswap".
Patch #1 adds a flag to zpool, then zswap used to determine if zpool
drivers such as zbud/z3fold/zsmalloc will enter an atomic context after
mapping.
The difference between zbud/z3fold and zsmalloc is that zsmalloc requires
an atomic context that since its map function holds a preempt-disabled,
but zbud/z3fold don't require an atomic context. So patch #2 sets flag
sleep_mapped to true indicating that zbud/z3fold can sleep after mapping.
zsmalloc didn't support sleep after mapping, so don't set that flag to
true.
This patch (of 2):
Add a flag to zpool, named is "can_sleep_mapped", and have it set true for
zbud/z3fold, not set this flag for zsmalloc, so its default value is
false. Then zswap could go the current path if the flag is true; and if
it's false, copy data from src to a temporary buffer, then unmap the
handle, take the mutex, process the buffer instead of src to avoid
sleeping function called from atomic context.
[natechancellor@gmail.com: add return value in zswap_frontswap_load]
Link: https://lkml.kernel.org/r/20210121214804.926843-1-natechancellor@gmail.com
[tiantao6@hisilicon.com: fix potential memory leak]
Link: https://lkml.kernel.org/r/1611538365-51811-1-git-send-email-tiantao6@hisilicon.com
[colin.king@canonical.com: fix potential uninitialized pointer read on tmp]
Link: https://lkml.kernel.org/r/20210128141728.639030-1-colin.king@canonical.com
[tiantao6@hisilicon.com: fix variable 'entry' is uninitialized when used]
Link: https://lkml.kernel.org/r/1611223030-58346-1-git-send-email-tiantao6@hisilicon.comLink: https://lkml.kernel.org/r/1611035683-12732-1-git-send-email-tiantao6@hisilicon.com
Link: https://lkml.kernel.org/r/1611035683-12732-2-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: Mike Galbraith <efault@gmx.de>
Cc: Barry Song <song.bao.hua@hisilicon.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Right now, all new ZIP drivers are adapted to crypto_acomp APIs rather
than legacy crypto_comp APIs. Tradiontal ZIP drivers like lz4,lzo etc
have been also wrapped into acomp via scomp backend. But zswap.c is still
using the old APIs. That means zswap won't be able to work on any new ZIP
drivers in kernel.
This patch moves to use cryto_acomp APIs to fix the disconnected bridge
between new ZIP drivers and zswap. It is probably the first real user to
use acomp but perhaps not a good example to demonstrate how multiple acomp
requests can be executed in parallel in one acomp instance. frontswap is
doing page load and store page by page synchronously. swap_writepage()
depends on the completion of frontswap_store() to decide if it should call
__swap_writepage() to swap to disk.
However this patch creates multiple acomp instances, so multiple threads
running on multiple different cpus can actually do (de)compression
parallelly, leveraging the power of multiple ZIP hardware queues. This is
also consistent with frontswap's page management model.
The old zswap code uses atomic context and avoids the race conditions
while shared resources like zswap_dstmem are accessed. Here since acomp
can sleep, per-cpu mutex is used to replace preemption-disable.
While it is possible to make mm/page_io.c and mm/frontswap.c support async
(de)compression in some way, the entire design requires careful thinking
and performance evaluation. For the first step, the base with fixed
connection between ZIP drivers and zswap should be built.
Link: https://lkml.kernel.org/r/20201107065332.26992-1-song.bao.hua@hisilicon.com
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Acked-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mahipal Challa <mahipalreddy2006@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These should be const, so make it so.
Link: https://lkml.kernel.org/r/1791535ee0b00f4a5c68cc4a8adada06593ad8f1.1601770305.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The compressed cache for swap pages (zswap) currently needs from 1 to 3
extra kernel command line parameters in order to make it work: it has to
be enabled by adding a "zswap.enabled=1" command line parameter and if one
wants a different compressor or pool allocator than the default lzo / zbud
combination then these choices also need to be specified on the kernel
command line in additional parameters.
Using a different compressor and allocator for zswap is actually pretty
common as guides often recommend using the lz4 / z3fold pair instead of
the default one. In such case it is also necessary to remember to enable
the appropriate compression algorithm and pool allocator in the kernel
config manually.
Let's avoid the need for adding these kernel command line parameters and
automatically pull in the dependencies for the selected compressor
algorithm and pool allocator by adding an appropriate default switches to
Kconfig.
The default values for these options match what the code was using
previously as its defaults.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com>
Link: http://lkml.kernel.org/r/20200202000112.456103-1-mail@maciej.szmigiero.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "pool" pointer can be NULL at the end of the init_zswap(). (We
would allocate a new pool later in that situation)
So in the error handling then we need to make sure pool is a valid
pointer before calling "zswap_pool_destroy(pool);" because that function
dereferences the argument.
Link: http://lkml.kernel.org/r/20200114050902.og32fkllkod5ycf5@kili.mountain
Fixes: 93d4dfa9fbd0 ("mm/zswap.c: add allocation hysteresis if pool limit is hit")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zswap will always try to shrink pool when zswap is full. If there is a
high pressure on zswap it will result in flipping pages in and out zswap
pool without any real benefit, and the overall system performance will
drop. The previous discussion on this subject [1] ended up with a
suggestion to implement a sort of hysteresis to refuse taking pages into
zswap pool until it has sufficient space if the limit has been hit.
This is my take on this.
Hysteresis is controlled with a sysfs-configurable parameter (namely,
/sys/kernel/debug/zswap/accept_threhsold_percent). It specifies the
threshold at which zswap would start accepting pages again after it
became full. Setting this parameter to 100 disables the hysteresis and
sets the zswap behavior to pre-hysteresis state.
[1] https://lkml.org/lkml/2019/11/8/949
Link: http://lkml.kernel.org/r/20200108200118.15563-1-vitaly.wool@konsulko.com
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zswap_writeback_entry() maps a handle to read swpentry first, and
then in the most common case it would map the same handle again.
This is ok when zbud is the backend since its mapping callback is
plain and simple, but it slows things down for z3fold.
Since there's hardly a point in unmapping a handle _that_ fast as
zswap_writeback_entry() does when it reads swpentry, the
suggestion is to keep the handle mapped till the end.
Link: http://lkml.kernel.org/r/20190916004640.b453167d3556c4093af4cf7d@gmail.com
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Seth Jennings <sjenning@redhat.com>
Cc: linux-mm@kvack.org
Acked-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
totalram_pages and totalhigh_pages are made static inline function.
Main motivation was that managed_page_count_lock handling was complicating
things. It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/sys/../zswap/stored_pages keeps rising in a zswap test with
"zswap.max_pool_percent=0" parameter. But it should not compress or
store pages any more since there is no space in the compressed pool.
Reproduce steps:
1. Boot kernel with "zswap.enabled=1"
2. Set the max_pool_percent to 0
# echo 0 > /sys/module/zswap/parameters/max_pool_percent
3. Do memory stress test to see if some pages have been compressed
# stress --vm 1 --vm-bytes $mem_available"M" --timeout 60s
4. Watching the 'stored_pages' number increasing or not
The root cause is:
When zswap_max_pool_percent is set to 0 via kernel parameter,
zswap_is_full() will always return true due to zswap_shrink(). But if
the shinking is able to reclain a page successfully the code then
proceeds to compressing/storing another page, so the value of
stored_pages will keep changing.
To solve the issue, this patch adds a zswap_is_full() check again after
zswap_shrink() to make sure it's now under the max_pool_percent, and to
not compress/store if we reached the limit.
Link: http://lkml.kernel.org/r/20180530103936.17812-1-liwang@redhat.com
Signed-off-by: Li Wang <liwang@redhat.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Huang Ying <huang.ying.caritas@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/*.c files use symbolic and octal styles for permissions.
Using octal and not symbolic permissions is preferred by many as more
readable.
https://lkml.org/lkml/2016/8/2/1945
Prefer the direct use of octal for permissions.
Done using
$ scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace mm/*.c
and some typing.
Before: $ git grep -P -w "0[0-7]{3,3}" mm | wc -l
44
After: $ git grep -P -w "0[0-7]{3,3}" mm | wc -l
86
Miscellanea:
o Whitespace neatening around these conversions.
Link: http://lkml.kernel.org/r/2e032ef111eebcd4c5952bae86763b541d373469.1522102887.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It was reported by Sergey Senozhatsky that if THP (Transparent Huge
Page) and frontswap (via zswap) are both enabled, when memory goes low
so that swap is triggered, segfault and memory corruption will occur in
random user space applications as follow,
kernel: urxvt[338]: segfault at 20 ip 00007fc08889ae0d sp 00007ffc73a7fc40 error 6 in libc-2.26.so[7fc08881a000+1ae000]
#0 0x00007fc08889ae0d _int_malloc (libc.so.6)
#1 0x00007fc08889c2f3 malloc (libc.so.6)
#2 0x0000560e6004bff7 _Z14rxvt_wcstoutf8PKwi (urxvt)
#3 0x0000560e6005e75c n/a (urxvt)
#4 0x0000560e6007d9f1 _ZN16rxvt_perl_interp6invokeEP9rxvt_term9hook_typez (urxvt)
#5 0x0000560e6003d988 _ZN9rxvt_term9cmd_parseEv (urxvt)
#6 0x0000560e60042804 _ZN9rxvt_term6pty_cbERN2ev2ioEi (urxvt)
#7 0x0000560e6005c10f _Z17ev_invoke_pendingv (urxvt)
#8 0x0000560e6005cb55 ev_run (urxvt)
#9 0x0000560e6003b9b9 main (urxvt)
#10 0x00007fc08883af4a __libc_start_main (libc.so.6)
#11 0x0000560e6003f9da _start (urxvt)
After bisection, it was found the first bad commit is bd4c82c22c ("mm,
THP, swap: delay splitting THP after swapped out").
The root cause is as follows:
When the pages are written to swap device during swapping out in
swap_writepage(), zswap (fontswap) is tried to compress the pages to
improve performance. But zswap (frontswap) will treat THP as a normal
page, so only the head page is saved. After swapping in, tail pages
will not be restored to their original contents, causing memory
corruption in the applications.
This is fixed by refusing to save page in the frontswap store functions
if the page is a THP. So that the THP will be swapped out to swap
device.
Another choice is to split THP if frontswap is enabled. But it is found
that the frontswap enabling isn't flexible. For example, if
CONFIG_ZSWAP=y (cannot be module), frontswap will be enabled even if
zswap itself isn't enabled.
Frontswap has multiple backends, to make it easy for one backend to
enable THP support, the THP checking is put in backend frontswap store
functions instead of the general interfaces.
Link: http://lkml.kernel.org/r/20180209084947.22749-1-ying.huang@intel.com
Fixes: bd4c82c22c ("mm, THP, swap: delay splitting THP after swapped out")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Suggested-by: Minchan Kim <minchan@kernel.org> [put THP checking in backend]
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Shaohua Li <shli@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: <stable@vger.kernel.org> [4.14]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We waste sizeof(swp_entry_t) for zswap header when using zsmalloc as
zpool driver because zsmalloc doesn't support eviction.
Add zpool_evictable() to detect if zpool is potentially evictable, and
use it in zswap to avoid waste memory for zswap header.
[yuzhao@google.com: The zpool->" prefix is a result of copy & paste]
Link: http://lkml.kernel.org/r/20180110225626.110330-1-yuzhao@google.com
Link: http://lkml.kernel.org/r/20180110224741.83751-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zswap is a cache which compresses the pages that are being swapped out
and stores them into a dynamically allocated RAM-based memory pool.
Experiments have shown that around 10-20% of pages stored in zswap are
same-filled pages (i.e. contents of the page are all same), but these
pages are handled as normal pages by compressing and allocating memory
in the pool.
This patch adds a check in zswap_frontswap_store() to identify
same-filled page before compression of the page. If the page is a
same-filled page, set zswap_entry.length to zero, save the same-filled
value and skip the compression of the page and alloction of memory in
zpool. In zswap_frontswap_load(), check if value of zswap_entry.length
is zero corresponding to the page to be loaded. If zswap_entry.length
is zero, fill the page with same-filled value. This saves the
decompression time during load.
On a ARM Quad Core 32-bit device with 1.5GB RAM by launching and
relaunching different applications, out of ~64000 pages stored in zswap,
~11000 pages were same-value filled pages (including zero-filled pages)
and ~9000 pages were zero-filled pages.
An average of 17% of pages(including zero-filled pages) in zswap are
same-value filled pages and 14% pages are zero-filled pages. An average
of 3% of pages are same-filled non-zero pages.
The below table shows the execution time profiling with the patch.
Baseline With patch % Improvement
-----------------------------------------------------------------
*Zswap Store Time 26.5ms 18ms 32%
(of same value pages)
*Zswap Load Time
(of same value pages) 25.5ms 13ms 49%
-----------------------------------------------------------------
On Ubuntu PC with 2GB RAM, while executing kernel build and other test
scripts and running multimedia applications, out of 360000 pages stored
in zswap 78000(~22%) of pages were found to be same-value filled pages
(including zero-filled pages) and 64000(~17%) are zero-filled pages. So
an average of %5 of pages are same-filled non-zero pages.
The below table shows the execution time profiling with the patch.
Baseline With patch % Improvement
-----------------------------------------------------------------
*Zswap Store Time 91ms 74ms 19%
(of same value pages)
*Zswap Load Time 50ms 7.5ms 85%
(of same value pages)
-----------------------------------------------------------------
*The execution times may vary with test device used.
Dan said:
: I did test this patch out this week, and I added some instrumentation to
: check the performance impact, and tested with a small program to try to
: check the best and worst cases.
:
: When doing a lot of swap where all (or almost all) pages are same-value, I
: found this patch does save both time and space, significantly. The exact
: improvement in time and space depends on which compressor is being used,
: but roughly agrees with the numbers you listed.
:
: In the worst case situation, where all (or almost all) pages have the
: same-value *except* the final long (meaning, zswap will check each long on
: the entire page but then still have to pass the page to the compressor),
: the same-value check is around 10-15% of the total time spent in
: zswap_frontswap_store(). That's a not-insignificant amount of time, but
: it's not huge. Considering that most systems will probably be swapping
: pages that aren't similar to the worst case (although I don't have any
: data to know that), I'd say the improvement is worth the possible
: worst-case performance impact.
[srividya.dr@samsung.com: add memset_l instead of for loop]
Link: http://lkml.kernel.org/r/20171018104832epcms5p1b2232e2236258de3d03d1344dde9fce0@epcms5p1
Signed-off-by: Srividya Desireddy <srividya.dr@samsung.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Dinakar Reddy Pathireddy <dinakar.p@samsung.com>
Cc: SHARAN ALLUR <sharan.allur@samsung.com>
Cc: RAJIB BASU <rajib.basu@samsung.com>
Cc: JUHUN KIM <juhunkim@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Timofey Titovets <nefelim4ag@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding
size determination a bit safer according to the Linux coding style
convention.
Link: http://lkml.kernel.org/r/19f9da22-092b-f867-bdf6-f4dbad7ccf1f@users.sourceforge.net
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the zpool/compressor param callback function to release the
zswap_pools_lock spinlock before calling param_set_charp, since that
function may sleep when it calls kmalloc with GFP_KERNEL.
While this problem has existed for a while, I wasn't able to trigger it
using a tight loop changing either/both the zpool and compressor params; I
think it's very unlikely to be an issue on the stable kernels, especially
since most zswap users will change the compressor and/or zpool from sysfs
only one time each boot - or zero times, if they add the params to the
kernel boot.
Fixes: c99b42c352 ("zswap: use charp for zswap param strings")
Link: http://lkml.kernel.org/r/20170126155821.4545-1-ddstreet@ieee.org
Signed-off-by: Dan Streetman <dan.streetman@canonical.com>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If either the compressor and/or zpool param are invalid at boot, and
their default value is also invalid, set the param to the empty string
to indicate there is no compressor and/or zpool configured. This allows
users to check the sysfs interface to see which param needs changing.
Link: http://lkml.kernel.org/r/20170124200259.16191-4-ddstreet@ieee.org
Signed-off-by: Dan Streetman <dan.streetman@canonical.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow zswap to initialize at boot even if it can't create its pool due
to a failure to create a zpool and/or compressor. Allow those to be
created later, from the sysfs module param interface.
Link: http://lkml.kernel.org/r/20170124200259.16191-3-ddstreet@ieee.org
Signed-off-by: Dan Streetman <dan.streetman@canonical.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add zswap_init_failed bool that prevents changing any of the module
params, if init_zswap() fails, and set zswap_enabled to false. Change
'enabled' param to a callback, and check zswap_init_failed before
allowing any change to 'enabled', 'zpool', or 'compressor' params.
Any driver that is built-in to the kernel will not be unloaded if its
init function returns error, and its module params remain accessible for
users to change via sysfs. Since zswap uses param callbacks, which
assume that zswap has been initialized, changing the zswap params after
a failed initialization will result in WARNING due to the param
callbacks expecting a pool to already exist. This prevents that by
immediately exiting any of the param callbacks if initialization failed.
This was reported here:
https://marc.info/?l=linux-mm&m=147004228125528&w=4
And fixes this WARNING:
[ 429.723476] WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60
The warning is just noise, and not serious. However, when init fails,
zswap frees all its percpu dstmem pages and its kmem cache. The kmem
cache might be serious, if kmem_cache_alloc(NULL, gfp) has problems; but
the percpu dstmem pages are definitely a problem, as they're used as
temporary buffer for compressed pages before copying into place in the
zpool.
If the user does get zswap enabled after an init failure, then zswap
will likely Oops on the first page it tries to compress (or worse, start
corrupting memory).
Fixes: 90b0fc26d5 ("zswap: change zpool/compressor at runtime")
Link: http://lkml.kernel.org/r/20170124200259.16191-2-ddstreet@ieee.org
Signed-off-by: Dan Streetman <dan.streetman@canonical.com>
Reported-by: Marcin Miroslaw <marcin@mejor.pl>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Install the callbacks via the state machine. Multi state is used to address the
per-pool notifier. Uppon adding of the intance the callback is invoked for all
online CPUs so the manual init can go.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-mm@kvack.org
Cc: Seth Jennings <sjenning@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20161126231350.10321-13-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add a work_struct to struct zswap_pool, and change __zswap_pool_empty to
use the workqueue instead of using call_rcu().
When zswap destroys a pool no longer in use, it uses call_rcu() to
perform the destruction/freeing. Since that executes in softirq
context, it must not sleep. However, actually destroying the pool
involves freeing the per-cpu compressors (which requires locking the
cpu_add_remove_lock mutex) and freeing the zpool, for which the
implementation may sleep (e.g. zsmalloc calls kmem_cache_destroy, which
locks the slab_mutex). So if either mutex is currently taken, or any
other part of the compressor or zpool implementation sleeps, it will
result in a BUG().
It's not easy to reproduce this when changing zswap's params normally.
In testing with a loaded system, this does not fail:
$ cd /sys/module/zswap/parameters
$ echo lz4 > compressor ; echo zsmalloc > zpool
nor does this:
$ while true ; do
> echo lzo > compressor ; echo zbud > zpool
> sleep 1
> echo lz4 > compressor ; echo zsmalloc > zpool
> sleep 1
> done
although it's still possible either of those might fail, depending on
whether anything else besides zswap has locked the mutexes.
However, changing a parameter with no delay immediately causes the
schedule while atomic BUG:
$ while true ; do
> echo lzo > compressor ; echo lz4 > compressor
> done
This is essentially the same as Yu Zhao's proposed patch to zsmalloc,
but moved to zswap, to cover compressor and zpool freeing.
Fixes: f1c54846ee ("zswap: dynamic pool creation")
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Reported-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dan Streetman <dan.streetman@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of using "zswap" as the name for all zpools created, add an
atomic counter and use "zswap%x" with the counter number for each zpool
created, to provide a unique name for each new zpool.
As zsmalloc, one of the zpool implementations, requires/expects a unique
name for each pool created, zswap should provide a unique name. The
zsmalloc pool creation does not fail if a new pool with a conflicting
name is created, unless CONFIG_ZSMALLOC_STAT is enabled; in that case,
zsmalloc pool creation fails with -ENOMEM. Then zswap will be unable to
change its compressor parameter if its zpool is zsmalloc; it also will
be unable to change its zpool parameter back to zsmalloc, if it has any
existing old zpool using zsmalloc with page(s) in it. Attempts to
change the parameters will result in failure to create the zpool. This
changes zswap to provide a unique name for each zpool creation.
Fixes: f1c54846ee ("zswap: dynamic pool creation")
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Dan Streetman <dan.streetman@canonical.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the use of strncmp in zswap_pool_find_get() to strcmp.
The use of strncmp is no longer correct, now that zswap_zpool_type is
not an array; sizeof() will return the size of a pointer, which isn't
the right length to compare. We don't need to use strncmp anyway,
because the existing params and the passed in params are all guaranteed
to be null terminated, so strcmp should be used.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Reported-by: Weijie Yang <weijie.yang@samsung.com>
Cc: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of using a fixed-length string for the zswap params, use charp.
This simplifies the code and uses less memory, as most zswap param strings
will be less than the current maximum length.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On the next line entry variable will be re-initialized so no need to init
it with NULL.
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts. They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve". __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".
Over time, callers had a requirement to not block when fallback options
were available. Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.
This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative. High priority users continue to use
__GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim. __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.
This patch then converts a number of sites
o __GFP_ATOMIC is used by callers that are high priority and have memory
pools for those requests. GFP_ATOMIC uses this flag.
o Callers that have a limited mempool to guarantee forward progress clear
__GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
into this category where kswapd will still be woken but atomic reserves
are not used as there is a one-entry mempool to guarantee progress.
o Callers that are checking if they are non-blocking should use the
helper gfpflags_allow_blocking() where possible. This is because
checking for __GFP_WAIT as was done historically now can trigger false
positives. Some exceptions like dm-crypt.c exist where the code intent
is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
flag manipulations.
o Callers that built their own GFP flags instead of starting with GFP_KERNEL
and friends now also need to specify __GFP_KSWAPD_RECLAIM.
The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.
The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL. They may
now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the zpool and compressor parameters to be changeable at runtime.
When changed, a new pool is created with the requested zpool/compressor,
and added as the current pool at the front of the pool list. Previous
pools remain in the list only to remove existing compressed pages from.
The old pool(s) are removed once they become empty.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Acked-by: Seth Jennings <sjennings@variantweb.net>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add dynamic creation of pools. Move the static crypto compression per-cpu
transforms into each pool. Add a pointer to zswap_entry to the pool it's
in.
This is required by the following patch which enables changing the zswap
zpool and compressor params at runtime.
[akpm@linux-foundation.org: fix merge snafus]
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Acked-by: Seth Jennings <sjennings@variantweb.net>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The structure zpool_ops is not modified so make the pointer to it a
pointer to const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zswap_get_swap_cache_page and read_swap_cache_async have pretty much the
same code with only significant difference in return value and usage of
swap_readpage.
I a helper __read_swap_cache_async() with the common code. Behavior
change: now zswap_get_swap_cache_page will use radix_tree_maybe_preload
instead radix_tree_preload. Looks like, this wasn't changed only by the
reason of code duplication.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the "enabled" parameter to be configurable at runtime. Remove the
enabled check from init(), and move it to the frontswap store() function;
when enabled, pages will be stored, and when disabled, pages won't be
stored.
This is almost identical to Seth's patch from 2 years ago:
http://lkml.iu.edu/hypermail/linux/kernel/1307.2/04289.html
[akpm@linux-foundation.org: tweak documentation]
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Suggested-by: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the underlay of zpool: zsmalloc/zbud, do not know who creates
them. There is not a method to let zsmalloc/zbud find which caller they
belong to.
Now we want to add statistics collection in zsmalloc. We need to name the
debugfs dir for each pool created. The way suggested by Minchan Kim is to
use a name passed by caller(such as zram) to create the zsmalloc pool.
/sys/kernel/debug/zsmalloc/zram0
This patch adds an argument `name' to zs_create_pool() and other related
functions.
Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
free_percpu() tests whether its argument is NULL and then returns
immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zswap_cpu_init/zswap_comp_exit/zswap_entry_cache_create is only called by
__init init_zswap()
Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
