When peeking an event, it has a short path and a long path. The short
path uses the session pointer "one_mmap_addr" to directly fetch the
event; and the long path needs to read out the event header and the
following event data from file and fill into the buffer pointer passed
through the argument "buf".
The issue is in the long path that it copies the event header and event
data into the same destination address which pointer "buf", this means
the event header is overwritten. We are just lucky to run into the
short path in most cases, so we don't hit the issue in the long path.
This patch adds the offset "hdr_sz" to the pointer "buf" when copying
the event data, so that it can reserve the event header which can be
used properly by its caller.
Fixes: 5a52f33adf ("perf session: Add perf_session__peek_event()")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210605052957.1070720-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ASan reported a memory leak caused by info_linear not being deallocated.
The info_linear was allocated during in perf_event__synthesize_one_bpf_prog().
This patch adds the corresponding free() when bpf_prog_info_node
is freed in perf_env__purge_bpf().
$ sudo ./perf record -- sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ]
=================================================================
==297735==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 7688 byte(s) in 19 object(s) allocated from:
#0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f)
#1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16
#2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16
#3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9
#4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8
#5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8
#6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8
#7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3
#11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20210602224024.300485-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Committer notes:
Added the missing {} for the now multiline 'if' block, fixing this error:
CC /tmp/build/perf/util/bpf_counter.o
util/bpf_counter.c: In function ‘bperf__load’:
util/bpf_counter.c:523:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation]
523 | if (evsel->bperf_leader_link_fd < 0 &&
| ^~
util/bpf_counter.c:526:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
526 | goto out;
| ^~~~
cc1: all warnings being treated as errors
Fixes: 7fac83aaf2 ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Link: http://lore.kernel.org/lkml/20210517081254.1561564-1-yukuai3@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I found that checking cgroup sampling support using the missing features
doesn't work on old kernels. Because it added both attr.cgroup bit and
PERF_SAMPLE_CGROUP bit, it needs to check whichever comes first (usually
the actual event, not dummy).
But it only checks the attr.cgroup bit which is set only in the dummy
event so cannot detect failtures due the sample bits. Also we don't
ignore the missing feature and retry, it'd be better checking it with
the API probing logic.
Committer notes:
Extracted the minimal part to check using the new cgroup API probe
routine, the part that removes the cgroup member can be left for further
discussion.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210527182835.1634339-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we just check whether the variable can be converted, 'tvar' should be
a null pointer. However, the null pointer check is missing in the
'Constant value' execution path.
The following cases can trigger this problem:
$ cat test.c
#include <stdio.h>
void main(void)
{
int a;
const int b = 1;
asm volatile("mov %1, %0" : "=r"(a): "i"(b));
printf("a: %d\n", a);
}
$ gcc test.c -o test -O -g
$ sudo ./perf probe -x ./test -L "main"
<main@/home/lhf/test.c:0>
0 void main(void)
{
2 int a;
const int b = 1;
asm volatile("mov %1, %0" : "=r"(a): "i"(b));
6 printf("a: %d\n", a);
}
$ sudo ./perf probe -x ./test -V "main:6"
Segmentation fault
The check on 'tvar' is added. If 'tavr' is a null pointer, we return 0
to indicate that the variable can be converted. Now, we can successfully
show the variables that can be accessed.
$ sudo ./perf probe -x ./test -V "main:6"
Available variables at main:6
@<main+13>
char* __fmt
int a
int b
However, the variable 'b' cannot be tracked.
$ sudo ./perf probe -x ./test -D "main:6 b"
Failed to find the location of the 'b' variable at this address.
Perhaps it has been optimized out.
Use -V with the --range option to show 'b' location range.
Error: Failed to add events.
This is because __die_find_variable_cb() did not successfully match
variable 'b', which has the DW_AT_const_value attribute instead of
DW_AT_location. We added support for DW_AT_const_value in
__die_find_variable_cb(). With this modification, we can successfully
track the variable 'b'.
$ sudo ./perf probe -x ./test -D "main:6 b"
p:probe_test/main_L6 /home/lhf/test:0x1156 b=\1:s32
Fixes: 66f69b2197 ("perf probe: Support DW_AT_const_value constant value")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Jianlin Lv <jianlin.lv@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Zhang Jinhao <zhangjinhao2@huawei.com>
http://lore.kernel.org/lkml/20210601092750.169601-1-lihuafei1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When all events of a perf-stat session use BPF, it is not necessary to
call evlist__enable() and evlist__disable(). Skip them when
all_counters_use_bpf is true.
Signed-off-by: Song Liu <song@kernel.org>
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It counts how often cgroups are changed actually during the context
switches.
# perf stat -a -e context-switches,cgroup-switches -a sleep 1
Performance counter stats for 'system wide':
11,267 context-switches
10,950 cgroup-switches
1.015634369 seconds time elapsed
Committer notes:
The kernel patches landed in v5.13, but this entry wasn't filled in
perf's parse-events tables, which was leading to a segfault when running
'perf list' on a kernel with that feature, as reported by Thomas
Richter.
Also removed the part touching tools/include/uapi/linux/perf_event.h as
it was updated in the usual sync with the kernel UAPI headers, in a
previous, already upstream, patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20210210083327.22726-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The decoder reports the current instruction if it was decoded. In some
cases the current instruction is not decoded, in which case the instruction
bytes length must be set to zero. Ensure that is always done.
Note perf script can anyway get the instruction bytes for any samples where
they are not present.
Also note, that there is a redundant "ptq->insn_len = 0" statement which is
not removed until a subsequent patch in order to make this patch apply
cleanly to stable branches.
Example:
A machne that supports TSX is required. It will have flag "rtm". Kernel
parameter tsx=on may be required.
# for w in `cat /proc/cpuinfo | grep -m1 flags `;do echo $w | grep rtm ; done
rtm
Test program:
#include <stdio.h>
#include <immintrin.h>
int main()
{
int x = 0;
if (_xbegin() == _XBEGIN_STARTED) {
x = 1;
_xabort(1);
} else {
printf("x = %d\n", x);
}
return 0;
}
Compile with -mrtm i.e.
gcc -Wall -Wextra -mrtm xabort.c -o xabort
Record:
perf record -e intel_pt/cyc/u --filter 'filter main @ ./xabort' ./xabort
Before:
# perf script --itrace=xe -F+flags,+insn,-period --xed --ns
xabort 1478 [007] 92161.431348581: transactions: x 400b81 main+0x14 (/root/xabort) mov $0xffffffff, %eax
xabort 1478 [007] 92161.431348624: transactions: tx abrt 400b93 main+0x26 (/root/xabort) mov $0xffffffff, %eax
After:
# perf script --itrace=xe -F+flags,+insn,-period --xed --ns
xabort 1478 [007] 92161.431348581: transactions: x 400b81 main+0x14 (/root/xabort) xbegin 0x6
xabort 1478 [007] 92161.431348624: transactions: tx abrt 400b93 main+0x26 (/root/xabort) xabort $0x1
Fixes: faaa87680b ("perf intel-pt/bts: Report instruction bytes and length in sample")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210519074515.9262-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Compiling perf with make LIBPFM4=1 includes libpfm support and
enables test case 63 'Test libpfm4 support'. This test reports an error
on all platforms for subtest 63.2 'test groups of --pfm-events'.
The reported error message is 'nested event groups not supported'
# ./perf test -F 63
63: Test libpfm4 support :
63.1: test of individual --pfm-events :
Error:
failed to parse event stereolab : event not found
Error:
failed to parse event stereolab,instructions : event not found
Error:
failed to parse event instructions,stereolab : event not found
Ok
63.2: test groups of --pfm-events :
Error:
nested event groups not supported <------ Error message here
Error:
failed to parse event {stereolab} : event not found
Error:
failed to parse event {instructions,cycles},{instructions,stereolab} :\
event not found
Ok
#
This patch addresses the error message 'nested event groups not supported'.
The root cause is function parse_libpfm_events_option() which parses the
event string '{},{instructions}' and can not handle a leading empty
group notation '{},...'.
The code detects the first (empty) group indicator '{' but does not
terminate group processing on the following group closing character '}'.
So when the second group indicator '{' is detected, the code assumes
a nested group and returns an error.
With the error message fixed, also change the expected event number to
one for the test case to succeed.
While at it also fix a memory leak. In good case the function does not
free the duplicated string given as first parameter.
Output after:
# ./perf test -F 63
63: Test libpfm4 support :
63.1: test of individual --pfm-events :
Error:
failed to parse event stereolab : event not found
Error:
failed to parse event stereolab,instructions : event not found
Error:
failed to parse event instructions,stereolab : event not found
Ok
63.2: test groups of --pfm-events :
Error:
failed to parse event {stereolab} : event not found
Error:
failed to parse event {instructions,cycles},{instructions,stereolab} : \
event not found
Ok
#
Error message 'nested event groups not supported' is gone.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-By: Ian Rogers <irogers@google.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20210517140931.2559364-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's confusing which one is effective when the both options are given.
The current code happens to use -c in this case but users might not be
aware of it. We can change it to complain about that instead of relying
on the implicit priority.
Before:
$ perf record -c 111111 -F 99 true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.031 MB perf.data (8 samples) ]
$ perf evlist -F
cycles: sample_period=111111
$
After:
$ perf record -c 111111 -F 99 true
cannot set frequency and period at the same time
$
So this change can break existing usages, but I think it's rare to have
both options and it'd be better changing them.
Suggested-by: Alexey Alexandrov <aalexand@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210402094020.28164-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf tool updates from Arnaldo Carvalho de Melo:
"perf stat:
- Add support for hybrid PMUs to support systems such as Intel
Alderlake and its BIG/little core/atom cpus.
- Introduce 'bperf' to share hardware PMCs with BPF.
- New --iostat option to collect and present IO stats on Intel
hardware.
This functionality is based on recently introduced sysfs attributes
for Intel® Xeon® Scalable processor family (code name Skylake-SP)
in commit bb42b3d397 ("perf/x86/intel/uncore: Expose an Uncore
unit to IIO PMON mapping")
It is intended to provide four I/O performance metrics in MB per
each PCIe root port:
- Inbound Read: I/O devices below root port read from the host memory
- Inbound Write: I/O devices below root port write to the host memory
- Outbound Read: CPU reads from I/O devices below root port
- Outbound Write: CPU writes to I/O devices below root port
- Align CSV output for summary.
- Clarify --null use cases: Assess raw overhead of 'perf stat' or
measure just wall clock time.
- Improve readability of shadow stats.
perf record:
- Change the COMM when starting tha workload so that --exclude-perf
doesn't seem to be not honoured.
- Improve 'Workload failed' message printing events + what was
exec'ed.
- Fix cross-arch support for TIME_CONV.
perf report:
- Add option to disable raw event ordering.
- Dump the contents of PERF_RECORD_TIME_CONV in 'perf report -D'.
- Improvements to --stat output, that shows information about
PERF_RECORD_ events.
- Preserve identifier id in OCaml demangler.
perf annotate:
- Show full source location with 'l' hotkey in the 'perf annotate'
TUI.
- Add line number like in TUI and source location at EOL to the 'perf
annotate' --stdio mode.
- Add --demangle and --demangle-kernel to 'perf annotate'.
- Allow configuring annotate.demangle{,_kernel} in 'perf config'.
- Fix sample events lost in stdio mode.
perf data:
- Allow converting a perf.data file to JSON.
libperf:
- Add support for user space counter access.
- Update topdown documentation to permit rdpmc calls.
perf test:
- Add 'perf test' for 'perf stat' CSV output.
- Add 'perf test' entries to test the hybrid PMU support.
- Cleanup 'perf test daemon' if its 'perf test' is interrupted.
- Handle metric reuse in pmu-events parsing 'perf test' entry.
- Add test for PE executable support.
- Add timeout for wait for daemon start in its 'perf test' entries.
Build:
- Enable libtraceevent dynamic linking.
- Improve feature detection output.
- Fix caching of feature checks caching.
- First round of updates for tools copies of kernel headers.
- Enable warnings when compiling BPF programs.
Vendor specific events:
- Intel:
- Add missing skylake & icelake model numbers.
- arm64:
- Add Hisi hip08 L1, L2 and L3 metrics.
- Add Fujitsu A64FX PMU events.
- PowerPC:
- Initial JSON/events list for power10 platform.
- Remove unsupported power9 metrics.
- AMD:
- Add Zen3 events.
- Fix broken L2 Cache Hits from L2 HWPF metric.
- Use lowercases for all the eventcodes and umasks.
Hardware tracing:
- arm64:
- Update CoreSight ETM metadata format.
- Fix bitmap for CS-ETM option.
- Support PID tracing in config.
- Detect pid in VMID for kernel running at EL2.
Arch specific updates:
- MIPS:
- Support MIPS unwinding and dwarf-regs.
- Generate mips syscalls_n64.c syscall table.
- PowerPC:
- Add support for PERF_SAMPLE_WEIGH_STRUCT on PowerPC.
- Support pipeline stage cycles for powerpc.
libbeauty:
- Fix fsconfig generator"
* tag 'perf-tools-for-v5.13-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (132 commits)
perf build: Defer printing detected features to the end of all feature checks
tools build: Allow deferring printing the results of feature detection
perf build: Regenerate the FEATURE_DUMP file after extra feature checks
perf session: Dump PERF_RECORD_TIME_CONV event
perf session: Add swap operation for event TIME_CONV
perf jit: Let convert_timestamp() to be backwards-compatible
perf tools: Change fields type in perf_record_time_conv
perf tools: Enable libtraceevent dynamic linking
perf Documentation: Document intel-hybrid support
perf tests: Skip 'perf stat metrics (shadow stat) test' for hybrid
perf tests: Support 'Convert perf time to TSC' test for hybrid
perf tests: Support 'Session topology' test for hybrid
perf tests: Support 'Parse and process metrics' test for hybrid
perf tests: Support 'Track with sched_switch' test for hybrid
perf tests: Skip 'Setup struct perf_event_attr' test for hybrid
perf tests: Add hybrid cases for 'Roundtrip evsel->name' test
perf tests: Add hybrid cases for 'Parse event definition strings' test
perf record: Uniquify hybrid event name
perf stat: Warn group events from different hybrid PMU
perf stat: Filter out unmatched aggregation for hybrid event
...
If a group has events which are from different hybrid PMUs,
shows a warning:
"WARNING: events in group from different hybrid PMUs!"
This is to remind the user not to put the core event and atom
event into one group.
Next, just disable grouping.
# perf stat -e "{cpu_core/cycles/,cpu_atom/cycles/}" -a -- sleep 1
WARNING: events in group from different hybrid PMUs!
WARNING: grouped events cpus do not match, disabling group:
anon group { cpu_core/cycles/, cpu_atom/cycles/ }
Performance counter stats for 'system wide':
5,438,125 cpu_core/cycles/
3,914,586 cpu_atom/cycles/
1.004250966 seconds time elapsed
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210427070139.25256-17-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On hybrid platform, user may want to enable events on one pmu.
Following syntax are supported:
cpu_core/<event>/
cpu_atom/<event>/
But the syntax doesn't work for cache event.
Before:
# perf stat -e cpu_core/LLC-loads/ -a -- sleep 1
event syntax error: 'cpu_core/LLC-loads/'
\___ unknown term 'LLC-loads' for pmu 'cpu_core'
Cache events are a bit complex. We can't create aliases for them.
We use another solution. For example, if we use "cpu_core/LLC-loads/",
in parse_events_add_pmu(), term->config is "LLC-loads".
Then we create a new parser to scan "LLC-loads". The
parse_events_add_cache() would be called during parsing.
The parse_state->hybrid_pmu_name is used to identify the pmu
where the event should be enabled on.
After:
# perf stat -e cpu_core/LLC-loads/ -a -- sleep 1
Performance counter stats for 'system wide':
24,593 cpu_core/LLC-loads/
1.003911601 seconds time elapsed
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210427070139.25256-13-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The functions perf_pmu__is_hybrid and perf_pmu__find_hybrid_pmu
can be used to identify the hybrid platform and return the found
hybrid cpu pmu. All the detected hybrid pmus have been saved in
'perf_pmu__hybrid_pmus' list. So we just need to search this list.
perf_pmu__hybrid_type_to_pmu converts the user specified string
to hybrid pmu name. This is used to support the '--cputype' option
in next patches.
perf_pmu__has_hybrid checks the existing of hybrid pmu. Note that,
we have to define it in pmu.c (make pmu-hybrid.c no more symbol
dependency), otherwise perf test python would be failed.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210427070139.25256-7-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We identify the cpu_core pmu and cpu_atom pmu by explicitly
checking following files:
For cpu_core, checks:
"/sys/bus/event_source/devices/cpu_core/cpus"
For cpu_atom, checks:
"/sys/bus/event_source/devices/cpu_atom/cpus"
If the 'cpus' file exists and it has data, the pmu exists.
But in order not to hardcode the "cpu_core" and "cpu_atom",
and make the code in a generic way.
So if the path "/sys/bus/event_source/devices/cpu_xxx/cpus" exists, the
hybrid pmu exists. All the detected hybrid pmus are linked to a global
list 'perf_pmu__hybrid_pmus' and then next we just need to iterate the
list to get all hybrid pmu by using perf_pmu__for_each_hybrid_pmu.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210427070139.25256-6-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make the output more readable, I think it's better to remove 0's in
the output. Also the dummy event has no event stats so it just wasts
the space. Let's use the --skip-empty option to suppress it.
$ perf report --stat --skip-empty
Aggregated stats:
TOTAL events: 16530
MMAP events: 226
COMM events: 1596
EXIT events: 2
THROTTLE events: 121
UNTHROTTLE events: 117
FORK events: 1595
SAMPLE events: 719
MMAP2 events: 12147
CGROUP events: 2
FINISHED_ROUND events: 2
THREAD_MAP events: 1
CPU_MAP events: 1
TIME_CONV events: 1
cycles stats:
SAMPLE events: 719
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210427013717.1651674-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, to use BPF to aggregate perf event counters, the user uses
--bpf-counters option. Enable "use bpf by default" events with a config
option, stat.bpf-counter-events. Events with name in the option will use
BPF.
This also enables mixed BPF event and regular event in the same sesssion.
For example:
perf config stat.bpf-counter-events=instructions
perf stat -e instructions,cs
The second command will use BPF for "instructions" but not "cs".
Signed-off-by: Song Liu <song@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20210425214333.1090950-4-song@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull x86 updates from Borislav Petkov:
- Turn the stack canary into a normal __percpu variable on 32-bit which
gets rid of the LAZY_GS stuff and a lot of code.
- Add an insn_decode() API which all users of the instruction decoder
should preferrably use. Its goal is to keep the details of the
instruction decoder away from its users and simplify and streamline
how one decodes insns in the kernel. Convert its users to it.
- kprobes improvements and fixes
- Set the maximum DIE per package variable on Hygon
- Rip out the dynamic NOP selection and simplify all the machinery
around selecting NOPs. Use the simplified NOPs in objtool now too.
- Add Xeon Sapphire Rapids to list of CPUs that support PPIN
- Simplify the retpolines by folding the entire thing into an
alternative now that objtool can handle alternatives with stack ops.
Then, have objtool rewrite the call to the retpoline with the
alternative which then will get patched at boot time.
- Document Intel uarch per models in intel-family.h
- Make Sub-NUMA Clustering topology the default and Cluster-on-Die the
exception on Intel.
* tag 'x86_core_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
x86, sched: Treat Intel SNC topology as default, COD as exception
x86/cpu: Comment Skylake server stepping too
x86/cpu: Resort and comment Intel models
objtool/x86: Rewrite retpoline thunk calls
objtool: Skip magical retpoline .altinstr_replacement
objtool: Cache instruction relocs
objtool: Keep track of retpoline call sites
objtool: Add elf_create_undef_symbol()
objtool: Extract elf_symbol_add()
objtool: Extract elf_strtab_concat()
objtool: Create reloc sections implicitly
objtool: Add elf_create_reloc() helper
objtool: Rework the elf_rebuild_reloc_section() logic
objtool: Fix static_call list generation
objtool: Handle per arch retpoline naming
objtool: Correctly handle retpoline thunk calls
x86/retpoline: Simplify retpolines
x86/alternatives: Optimize optimize_nops()
x86: Add insn_decode_kernel()
x86/kprobes: Move 'inline' to the beginning of the kprobe_is_ss() declaration
...
