Commit Graph

46 Commits

Author SHA1 Message Date
Jose Abreu
c9afc1834e ASoC: dwc: Disallow building designware_pcm as a module
Designware PCM is an extension to Designware I2S and they are dependent
on each other. For this reason, make Designware PCM a boolean which will
compile with Desigwnare I2S module. The name of the module is not changed
but the name of the files need to be changed.

Also, without this commit we get errors when probbing designware_i2s module
because of unspecified license:

designware_pcm: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
designware_pcm: Unknown symbol __rcu_read_lock (err 0)
designware_pcm: Unknown symbol devm_snd_soc_register_platform (err 0)
designware_pcm: Unknown symbol synchronize_rcu (err 0)
designware_pcm: Unknown symbol __rcu_read_unlock (err 0)
designware_pcm: Unknown symbol snd_soc_set_runtime_hwparams (err 0)

So, this is really needed as a fix.

Fixes: 79361b2b98 ("ASoC: dwc: Add PIO PCM extension")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-30 20:27:04 +08:00
Jose Abreu
e21ab17904 ASoC: dwc: Enable 24 bit sample size in PIO mode
Sample size of 24 bits use in reality 32 bits for storage. We
can safelly enable this sample size and treat the data as
32 bits.

Tested in a x86_64 platform and in ARC AXS101 SDP platform.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-09 11:59:09 +00:00
Jose Abreu
e2f748e06d ASoC: dwc: Add record capability in PIO mode
Up until now PIO mode offered only playback support. With
this patch we add support for record mode. The PCM was
refactored so that we could reuse the existing infrastructure
without many changes.

We have support for 16 and 32 bits of sample size using
only 2 channels.

Tested in a x86_64 platform and in ARC AXS101 SDP platform.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-09 11:59:05 +00:00
Jose Abreu
6fce983f9b ASoC: dwc: Fix PIO mode initialization
We can no longer rely on the return value of
devm_snd_dmaengine_pcm_register(...) to check if the DMA
handle is declared in the DT.

Previously this check activated PIO mode but currently
dma_request_chan returns either a valid channel or -EPROBE_DEFER.

In order to activate PIO mode check instead if the interrupt
line is declared. This reflects better what is documented in
the DT bindings (see Documentation/devicetree/bindings/sound/
designware-i2s.txt).

Also, initialize use_pio variable which was never being set
causing PIO mode to never work.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-14 14:38:10 +00:00
Sylwester Nawrocki
35397edeb1 ASoC: dwc: Drop DMA channel names assignment
The dw_configure_dai_by_dt() function and further dev->{play,capture}
_dma_data.dt data structures seem to be used in this driver only in case
of a system using devicetree, thus chan_name assignments have no effect
since they will be ignored in dmaengine_pcm_request_chan_of() call and
will be substituted with values taken form dmaengine_pcm_dma_channel_names[]
table ("tx", "rx").

Also there is no any "TX", "RX" dma-names entries in arch/arm/boot/dts,
only lower case "tx", "rx" seem to be used.

Lastly, this driver doesn't set SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME
flag when registering a dmaengine PCM to indicate the chan_name should be
used.

My intention is to eventually remove the struct snd_dmaengine_dai_dma_data
chan_name field as there is also a chan_names[] field in struct
snd_dmaengine_pcm_config which can be used for same purpose.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08 11:54:50 +01:00
Colin Ian King
57072ae122 SoC: dwc: trivial fix of spelling mistake "unsuppted" -> "unsupported"
trivial fix to spelling mistake in dev_err message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-26 02:18:52 +01:00
Arnd Bergmann
3276d0aa0b ASoC: dwc: make pcm support built-in when necessary
The new PIO mode for the dwc audio driver causes a link failure
when it is built as a loadable module but the audio driver is built-in:

sound/built-in.o: In function `i2s_irq_handler':
:(.text+0x58c64): undefined reference to `dw_pcm_push_tx'
sound/built-in.o: In function `dw_i2s_probe':
:(.text+0x593dc): undefined reference to `dw_pcm_register'

We could link both into a single module, but apparently the
author intended them to be separate, so this instead changes
the Makefile to force the pcm module to be built-in if the
base module is. This is a bit hacky but not as bad as trying
to work around it in Kconfig language.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 79361b2b98 ("ASoC: dwc: Add PIO PCM extension")
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-21 19:07:21 +01:00
Jose Abreu
79361b2b98 ASoC: dwc: Add PIO PCM extension
A PCM extension was added to I2S driver so that audio
samples are transferred using PIO mode.

The PCM supports two channels @ 16 or 32 bits with rates
32k, 44.1k and 48k.

Although the mainline I2S driver uses ALSA DMA engine the
I2S controller can be built without DMA support, therefore
this is the reason why this extension was added.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-13 17:52:00 +01:00
Jose Abreu
b1d32feb9a ASoC: dwc: Add helper functions to disable/enable irqs
Helper functions to disable and enable the I2S interrupts were
added. Only the interrupts of the used channels are enabled.

Also, there is no need to enable irqs at dw_i2s_config(), they
are already enabled at startup.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: alsa-devel@alsa-project.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-30 16:15:21 +01:00
Jose Abreu
3fafd14d94 ASoC: dwc: Use fifo depth to program FCR
This patch makes Designware I2S driver use the fifo
depth value to program the fifo configuration register
instead of using hardcoded values.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-07 10:41:36 -07:00
Jose Abreu
613c7c4003 ASoC: dwc: Unmask I2S interrupts only for enabled channels
There is no need to unmask all interrupts at I2S start. This
can cause performance issues in slower platforms.

Unmask only the interrupts for the used channels.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-05 11:57:54 -07:00
Jon Medhurst (Tixy)
d2f916aacc ASoC: dwc: Ensure i2s_reg_comp{1,2} is always initialised
In the case that the driver is configured from device-tree
i2s_reg_comp1 and i2s_reg_comp2 aren't initialised, breaking the driver.
Fix this by unconditionally setting these values before checking for quirks.

Fixes: a242cac1d3 ("ASoC: dwc: add quirk to override COMP_PARAM_1 register")
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-02 19:20:18 +00:00
Maruthi Srinivas Bayyavarapu
a242cac1d3 ASoC: dwc: add quirk to override COMP_PARAM_1 register
DWC for capture in ACP 2.x IP reports playback and capture capabilities
though it supports only capture. Added a quirk to override default value
to represent capture capability only.

Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-10 12:11:50 +00:00
Maruthi Srinivas Bayyavarapu
0032e9dbc5 ASoC: dwc: reconfigure dwc in 'resume' from 'suspend'
DWC IP can be powered off during system suspend in some platforms.
After system is resumed, dwc needs to be programmed again to continue
audio use case.

Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-07 19:52:02 +00:00
Maruthi Srinivas Bayyavarapu
e164835a02 ASoC: dwc: add quirk for different register offset
DWC in ACP 2.x IP has different offsets for I2S_COMP_PARAM_* registers.
Added a quirk to support the same.

Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-07 19:52:02 +00:00
Maruthi Srinivas Bayyavarapu
f48303122d ASoC: dwc: add runtime suspend/resume functionality
When DW controller is in master mode, it can disable/enable clock
during the device runtime suspend/resume sequence.

Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-07 19:52:02 +00:00
Mark Brown
f72362e6b7 Merge remote-tracking branches 'asoc/topic/dwc', 'asoc/topic/es8328', 'asoc/topic/fsl' and 'asoc/topic/fsl-card' into asoc-next 2015-10-26 11:16:03 +09:00
Maruthi Srinivas Bayyavarapu
ab57b8e90c ASoC: dwc: add check for master/slave format
DW i2s controller's master/slave config can be read from a
read-only register. Machine driver can try to set a master/slave
format on cpu-dai using 'set_fmt' of dai ops. A check is added to
verify codec is master when dwc is slave and vice-versa.

Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-24 06:29:38 +09:00
Maruthi Srinivas Bayyavarapu
1d957d862a ASoC: dwc: support dw i2s in slave mode
dw i2s controller can work in slave mode, codec being master.
dw i2s is made to support master/slave operation, by reading dwc
register.

Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-05 16:31:43 +01:00
yitian
924eb47512 ASoC: dwc: fix dma stop transferring issue
Designware I2S uses tx empty and rx available signals as the DMA
handshaking signals. during music playing, if XRUN occurs,
i2s_stop() function will be executed and both tx and rx irq are
masked, when music continues to be played, i2s_start() is executed
but both tx and rx irq are not unmasked which cause I2S stop
sending DMA handshaking signal to DMA controller, and it finally
causes music playing will be stopped once XRUN occurs for the first
time.

[On list discussion suggests this may be partly a race condition on slow
systems -- broonie]

Signed-off-by: Yitian Bu <yitian.bu@tangramtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 18:05:51 +01:00
Yitian Bu
4873867e5f ASoC: dwc: correct irq clear method
from Designware I2S datasheet, tx/rx XRUN irq is cleared by
reading register TOR/ROR, rather than by writing into them.

Signed-off-by: Yitian Bu <yitian.bu@tangramtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-10-02 11:44:04 +01:00
Mark Brown
d40d19447b Merge remote-tracking branches 'asoc/topic/doc', 'asoc/topic/dwc', 'asoc/topic/fsi', 'asoc/topic/fsl' and 'asoc/topic/fsl-asrc' into asoc-next 2015-02-04 20:57:11 +00:00
Andrew Jackson
acae254a8e ASoC: dwc: Remove unnecessary conditional compilation
of_match_ptr is already conditionally compiled based on
CONFIG_OF so further conditional compilation is not
required.  Remove conditional compilation surrounding
of_match_ptr.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 17:40:08 +00:00
Andrew Jackson
0d274544bf ASoC: dwc: Add devicetree support for Designware I2S
Allow the driver to be configured through a device tree rather than platform
data.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30 16:52:28 +00:00
Andrew Jackson
758c2debcb ASoC: dwc: Register components with managed interface
Register SOC component using managed interface to
simplify error handling and future introduction of
device tree.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30 16:49:37 +00:00
Andrew Jackson
3a19272a50 ASoC: dwc: Prepare clock before use
Some I2S clocks may require some time to get the clock ready
for operation and so need to be prepared before they are enabled.
So, prepare the clock as well as enabling it, but combine the
two through clk_prepare_enable.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30 16:49:36 +00:00
Andrew Jackson
b226efe581 ASoC: dwc: Read I2S block configuration from registers
The I2S block provides component parameter registers which
describe how the block is instantiated.  Use these registers
to extract the block's configuration rather than relying on
platform data.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30 16:46:14 +00:00
Andrew Jackson
a56257c657 ASoC: dwc: Switch to managed clock resource
Simplify error handling during probe by using managed clock
resources.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30 16:46:14 +00:00
Andrew Jackson
db2c1f9e38 ASoC: dwc: Iterate over all channels
The Designware core can be configured with up to four stereo channels.
Each stereo channel is individually configured so, when the driver's
hw_params call is made, each requested stereo channel has to be
programmed.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22 15:06:03 +00:00
Andrew Jackson
3475c3d034 ASoC: dwc: Ensure FIFOs are flushed to prevent channel swap
Flush the FIFOs when the stream is prepared for use.  This avoids
an inadvertent swapping of the left/right channels if the FIFOs are
not empty at startup.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2014-12-22 15:05:54 +00:00
Andrew Jackson
afa8603c62 ASoC: dwc: Reorder code in preparation for DT support
Move code that configures the DAI and DMA into a separate function.  This
reduces the size of the dw_i2s_probe function and will make it easier to
add support for device tree to the driver.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22 13:59:53 +00:00
Andrew Jackson
be33465e58 ASoC: dwc: Remove unnecessary debug messages and tests
The devm_XXX allocation functions print a message on failure,
so additional messages are not required.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22 13:59:52 +00:00
Linus Torvalds
e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Andrew Jackson
b163be4cf4 ASoC: dwc: Allocate resources with devm_ioremap_resource
Prepare for the introduction of device-tree support by re-ordering some
of the allocations and using devm_iomap_resource to simplify IO mapping.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03 18:26:51 +00:00
Wolfram Sang
27cbfa122a ASoC: dwc: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:22:07 +02:00
Rajeev Kumar
b794dbcd31 ASoC: Update email id of the author
I moved from ST Microelectronics and so updating email-id to personal one.

Signed-off-by: Rajeev Kumar <rajeevkumar.linux@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-09-09 10:49:41 +01:00
Rajeev Kumar
9a302c32f3 ASoC: dwc: Update email id of the author
I moved from ST Microelectronics and the email-id no longer
exists. Update email-id to personal one,

Signed-off-by: Rajeev Kumar <rajeevkumar.linux@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-06 12:47:22 +01:00
Fabio Estevam
e925a6b1b6 ASoC: designware_i2s: Remove unnecessary dev_set_drvdata()
Driver core clears the driver data to NULL after device_release or on probe
failure, so just remove it from here.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29 13:18:32 +01:00
Rajeev Kumar
22a4adf258 ASoC: dwc: Folder path correction in file header.
Folder path correction in file header.

Signed-off-by: Rajeev Kumar <rajeevk-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-12 16:19:01 +01:00
Rajeev Kumar
5e83c160d8 ASoC: dwc: debug message correction.
Debug message correction.

Signed-off-by: Rajeev Kumar <rajeevk-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-12 16:15:13 +01:00
Kuninori Morimoto
92eaa328f2 ASoC: switch over to use snd_soc_register_component() on dw i2s
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26 21:55:22 +00:00
Dan Carpenter
0099d24c6b ASoC: dwc: fix support for more than two channels
There were missing break statements so everything used
TWO_CHANNEL_SUPPORT.

Also I added a return statement to silence a GCC warning:

	sound/soc/dwc/designware_i2s.c: In function ‘dw_i2s_hw_params’:
	sound/soc/dwc/designware_i2s.c:236:32: warning: ‘ch_reg’ may be
		used uninitialized in this function
		[-Wmaybe-uninitialized]

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-26 15:37:09 +08:00
Mark Brown
1520ffd218 ASoC: dwc: Staticise non-exported i2s_start()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 19:15:43 +01:00
Mark Brown
6b4a21b64c ASoC: dwc: Add missing __iomem annotations
Otherwise sparse gets very upset with us.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-28 13:14:52 +01:00
Mark Brown
d69d65226a ASoC: dwc: Bodge around continuing absence of clock API stubs
The patches for stubbing out the generic clock API still haven't been
applied so we need to either add ifdefs here or add a dependency until
someone decides to actually apply them.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25 10:01:27 +01:00
Rajeev Kumar
3a9cf8efd7 ASoC: Add support for synopsys i2s controller as per ASoC framework.
This patch add support for synopsys I2S controller as per the ASoC
framework.

Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-22 10:25:45 +01:00