Halil Pasic points out [1] that the full revert of that commit (revert
in bddac7c1e0), and that a partial revert that only reverts the
problematic case, but still keeps some of the cleanups is probably
better. 
And that partial revert [2] had already been verified by Oleksandr
Natalenko to also fix the issue, I had just missed that in the long
discussion.
So let's reinstate the cleanups from commit aa6f8dcbab ("swiotlb:
rework "fix info leak with DMA_FROM_DEVICE""), and effectively only
revert the part that caused problems.
Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1]
Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2]
Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/ [3]
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Christoph Hellwig" <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit aa6f8dcbab.
It turns out this breaks at least the ath9k wireless driver, and
possibly others.
What the ath9k driver does on packet receive is to set up the DMA
transfer with:
int ath_rx_init(..)
..
bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
common->rx_bufsize,
DMA_FROM_DEVICE);
and then the receive logic (through ath_rx_tasklet()) will fetch
incoming packets
static bool ath_edma_get_buffers(..)
..
dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr,
common->rx_bufsize, DMA_FROM_DEVICE);
ret = ath9k_hw_process_rxdesc_edma(ah, rs, skb->data);
if (ret == -EINPROGRESS) {
/*let device gain the buffer again*/
dma_sync_single_for_device(sc->dev, bf->bf_buf_addr,
common->rx_bufsize, DMA_FROM_DEVICE);
return false;
}
and it's worth noting how that first DMA sync:
dma_sync_single_for_cpu(..DMA_FROM_DEVICE);
is there to make sure the CPU can read the DMA buffer (possibly by
copying it from the bounce buffer area, or by doing some cache flush).
The iommu correctly turns that into a "copy from bounce bufer" so that
the driver can look at the state of the packets.
In the meantime, the device may continue to write to the DMA buffer, but
we at least have a snapshot of the state due to that first DMA sync.
But that _second_ DMA sync:
dma_sync_single_for_device(..DMA_FROM_DEVICE);
is telling the DMA mapping that the CPU wasn't interested in the area
because the packet wasn't there. In the case of a DMA bounce buffer,
that is a no-op.
Note how it's not a sync for the CPU (the "for_device()" part), and it's
not a sync for data written by the CPU (the "DMA_FROM_DEVICE" part).
Or rather, it _should_ be a no-op. That's what commit aa6f8dcbab
broke: it made the code bounce the buffer unconditionally, and changed
the DMA_FROM_DEVICE to just unconditionally and illogically be
DMA_TO_DEVICE.
[ Side note: purely within the confines of the swiotlb driver it wasn't
entirely illogical: The reason it did that odd DMA_FROM_DEVICE ->
DMA_TO_DEVICE conversion thing is because inside the swiotlb driver,
it uses just a swiotlb_bounce() helper that doesn't care about the
whole distinction of who the sync is for - only which direction to
bounce.
So it took the "sync for device" to mean that the CPU must have been
the one writing, and thought it meant DMA_TO_DEVICE. ]
Also note how the commentary in that commit was wrong, probably due to
that whole confusion, claiming that the commit makes the swiotlb code
"bounce unconditionally (that is, also
when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale
data from the swiotlb buffer"
which is nonsensical for two reasons:
- that "also when dir == DMA_TO_DEVICE" is nonsensical, as that was
exactly when it always did - and should do - the bounce.
- since this is a sync for the device (not for the CPU), we're clearly
fundamentally not coping back stale data from the bounce buffers at
all, because we'd be copying *to* the bounce buffers.
So that commit was just very confused. It confused the direction of the
synchronization (to the device, not the cpu) with the direction of the
DMA (from the device).
Reported-and-bisected-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Olha Cherevyk <olha.cherevyk@gmail.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Toke Høiland-Jørgensen <toke@toke.dk>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Unfortunately, we ended up merging an old version of the patch "fix info
leak with DMA_FROM_DEVICE" instead of merging the latest one. Christoph
(the swiotlb maintainer), he asked me to create an incremental fix
(after I have pointed this out the mix up, and asked him for guidance).
So here we go.
The main differences between what we got and what was agreed are:
* swiotlb_sync_single_for_device is also required to do an extra bounce
* We decided not to introduce DMA_ATTR_OVERWRITE until we have exploiters
* The implantation of DMA_ATTR_OVERWRITE is flawed: DMA_ATTR_OVERWRITE
must take precedence over DMA_ATTR_SKIP_CPU_SYNC
Thus this patch removes DMA_ATTR_OVERWRITE, and makes
swiotlb_sync_single_for_device() bounce unconditionally (that is, also
when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale
data from the swiotlb buffer.
Let me note, that if the size used with dma_sync_* API is less than the
size used with dma_[un]map_*, under certain circumstances we may still
end up with swiotlb not being transparent. In that sense, this is no
perfect fix either.
To get this bullet proof, we would have to bounce the entire
mapping/bounce buffer. For that we would have to figure out the starting
address, and the size of the mapping in
swiotlb_sync_single_for_device(). While this does seem possible, there
seems to be no firm consensus on how things are supposed to work.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: ddbd89deb7 ("swiotlb: fix info leak with DMA_FROM_DEVICE")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The problem I'm addressing was discovered by the LTP test covering
cve-2018-1000204.
A short description of what happens follows:
1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO
interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV
and a corresponding dxferp. The peculiar thing about this is that TUR
is not reading from the device.
2) In sg_start_req() the invocation of blk_rq_map_user() effectively
bounces the user-space buffer. As if the device was to transfer into
it. Since commit a45b599ad8 ("scsi: sg: allocate with __GFP_ZERO in
sg_build_indirect()") we make sure this first bounce buffer is
allocated with GFP_ZERO.
3) For the rest of the story we keep ignoring that we have a TUR, so the
device won't touch the buffer we prepare as if the we had a
DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device
and the buffer allocated by SG is mapped by the function
virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here
scatter-gather and not scsi generics). This mapping involves bouncing
via the swiotlb (we need swiotlb to do virtio in protected guest like
s390 Secure Execution, or AMD SEV).
4) When the SCSI TUR is done, we first copy back the content of the second
(that is swiotlb) bounce buffer (which most likely contains some
previous IO data), to the first bounce buffer, which contains all
zeros. Then we copy back the content of the first bounce buffer to
the user-space buffer.
5) The test case detects that the buffer, which it zero-initialized,
ain't all zeros and fails.
One can argue that this is an swiotlb problem, because without swiotlb
we leak all zeros, and the swiotlb should be transparent in a sense that
it does not affect the outcome (if all other participants are well
behaved).
Copying the content of the original buffer into the swiotlb buffer is
the only way I can think of to make swiotlb transparent in such
scenarios. So let's do just that if in doubt, but allow the driver
to tell us that the whole mapped buffer is going to be overwritten,
in which case we can preserve the old behavior and avoid the performance
impact of the extra bounce.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This API is the equivalent of alloc_pages, except that the returned memory
is guaranteed to be DMA addressable by the passed in device. The
implementation will also be used to provide a more sensible replacement
for DMA_ATTR_NON_CONSISTENT flag.
Additionally dma_alloc_noncoherent is switched over to use dma_alloc_pages
as its backend.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> (MIPS part)
