Commit Graph

23 Commits

Author SHA1 Message Date
WANG Cong
b86f81cca9 bridge: move br_net_exit() to br.c
And it can become static.

Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13 23:42:39 -08:00
Igor Maravić
e6373c4c0e net:bridge: use IS_ENABLED
Use IS_ENABLED(CONFIG_FOO)
instead of defined(CONFIG_FOO) || defined (CONFIG_FOO_MODULE)

Signed-off-by: Igor Maravić <igorm@etf.rs>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16 15:49:52 -05:00
stephen hemminger
bb900b27a2 bridge: allow creating bridge devices with netlink
Add netlink device ops to allow creating bridge device via netlink.
This works in a manner similar to vlan, macvlan and bonding.

Example:
  # ip link add link dev br0 type bridge
  # ip link del dev br0

The change required rearranging initializtion code to deal with
being called by create link. Most of the initialization happens
in br_dev_setup, but allocation of stats is done in ndo_init callback
to deal with allocation failure. Sysfs setup has to wait until
after the network device kobject is registered.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04 17:22:28 -07:00
Eric Dumazet
a386f99025 bridge: add proper RCU annotation to should_route_hook
Add br_should_route_hook_t typedef, this is the only way we can
get a clean RCU implementation for function pointer.

Move route_hook to location where it is used.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15 11:13:16 -08:00
Jiri Pirko
ab95bfe01f net: replace hooks in __netif_receive_skb V5
What this patch does is it removes two receive frame hooks (for bridge and for
macvlan) from __netif_receive_skb. These are replaced them with a single
hook for both. It only supports one hook per device because it makes no
sense to do bridging and macvlan on the same device.

Then a network driver (of virtual netdev like macvlan or bridge) can register
an rx_handler for needed net device.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 07:11:15 -07:00
stephen hemminger
28a16c9796 bridge: change console message interface
Use one set of macro's for all bridge messages.

Note: can't use netdev_XXX macro's because bridge is purely
virtual and has no device parent.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-15 23:10:02 -07:00
Jesper Dangaard Brouer
473c22d759 bridge: Use rcu_barrier() instead of syncronize_net() on unload.
When unloading modules that uses call_rcu() callbacks, then we must
use rcu_barrier().  This module uses syncronize_net() which is not
enough to be sure that all callback has been completed.

Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-26 13:51:32 -07:00
Michał Mirosław
da6782927d bridge: Simplify interface for ATM LANE
This patch changes FDB entry check for ATM LANE bridge integration.
There's no point in holding a FDB entry around SKB building.

br_fdb_get()/br_fdb_put() pair are changed into single br_fdb_test_addr()
hook that checks if the addr has FDB entry pointing to other port
to the one the request arrived on.

FDB entry refcounting is removed as it's not used anywhere else.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 21:03:21 -07:00
Alexey Dobriyan
712d6954e3 netns bridge: cleanup bridges during netns stop
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Stephen Hemminger <shemming@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-08 16:20:18 -07:00
Patrick McHardy
7c85fbf065 bridge: Use STP demux
Use the STP demux layer for receiving STP PDUs instead of directly
registering with LLC.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-05 21:25:56 -07:00
Adrian Bunk
0b04082995 net: remove CVS keywords
This patch removes CVS keywords that weren't updated for a long time
from comments.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-11 21:00:38 -07:00
Bodo Stroesser
d69efb1689 bridge: kernel panic when unloading bridge module
There is a race condition when unloading bridge and netfilter.

The problem happens if __fake_rtable is in use by a skb
coming in, while someone starts to unload bridge.ko.
br_netfilter_fini() is called at the beginning of unload
in br_deinit() while skbs still are being forwarded and
transferred to local ip stack. Thus there is a possibility
of the __fake_rtable pointer not being removed in a skb that
goes up to ip stack. This results in a kernel panic, as
ip_rcv() calls the input-function of __fake_rtable, which
is NULL.

Moving the call of br_netfilter_fini() to the end of
br_deinit() solves the problem.

Signed-off-by: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-29 03:18:13 -07:00
Pavel Emelyanov
17efdd4575 [BRIDGE]: Lost call to br_fdb_fini() in br_init() error path
In case the br_netfilter_init() (or any subsequent call) 
fails, the br_fdb_fini() must be called to free the allocated
in br_fdb_init() br_fdb_cache kmem cache.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-29 23:41:43 +11:00
Herbert Xu
3db05fea51 [NETFILTER]: Replace sk_buff ** with sk_buff *
With all the users of the double pointers removed, this patch mops up by
finally replacing all occurances of sk_buff ** in the netfilter API by
sk_buff *.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-15 12:26:29 -07:00
Akinobu Mita
87a596e0b8 bridge: check kmem_cache_create() error
This patch checks kmem_cache_create() error and aborts loading module
on failure.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
2007-04-25 22:28:51 -07:00
Thomas Graf
32fe21c0c0 [BRIDGE]: Use rtnl registration interface
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:27:14 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Stephen Hemminger
11dc1f36a6 [BRIDGE]: netlink interface for link management
Add basic netlink support to the Ethernet bridge. Including:
 * dump interfaces in bridges
 * monitor link status changes
 * change state of bridge port

For some demo programs see:
	http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz

These are to allow building a daemon that does alternative
implementations of Spanning Tree Protocol.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:26:14 -07:00
Stephen Hemminger
c090971326 [BRIDGE]: fix module startup error handling
Return address in use, if some other kernel code has the SAP.
Propogate out error codes from netfilter registration and unwind.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:26:12 -07:00
Stephen Hemminger
387e2b0439 [BRIDGE]: need to ref count the LLC sap
Bridge will OOPS on removal if other application has the SAP open.
The bridge SAP might be shared with other usages, so need
to do reference counting on module removal rather than explicit
close/delete.

Since packet might arrive after or during removal, need to clear
the receive function handle, so LLC only hands it to user (if any).

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-23 15:20:25 -07:00
Stephen Hemminger
cf0f02d04a [BRIDGE]: use llc for receiving STP packets
Use LLC for the receive path of Spanning Tree Protocol packets.
This allows link local multicast packets to be received by
other protocols (if they care), and uses the existing LLC
code to get STP packets back into bridge code.

The bridge multicast address is also checked, so bridges using
other link local multicast addresses are ignored. This allows
for use of different multicast addresses to define separate STP
domains.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:59:06 -08:00
Stephen Hemminger
8cbb512e50 [BRIDGE]: add version number
Add version info to bridge module.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 13:11:04 -08:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00