Commit Graph

664151 Commits

Author SHA1 Message Date
Jacopo Mondi
3115345577 drm: rcar-du: Make sure the VSP is initialized on platforms that need it
On Gen3 platforms planes are managed by the external VSP compositor on
behalf of DRM/KMS. If VSP compositor support is not enabled in the DU
driver, the VSP initialization stub routine is called. Return an error
from that stub to fail explicitly, otherwise the device won't be usable
and the driver will crash.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[Clarified commit message]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:03:50 +03:00
Laurent Pinchart
a8fd12233e drm: rcar-du: Use DRM core's atomic commit helper
The DRM core atomic helper now supports asynchronous commits natively.
The custom rcar-du implementation isn't needed anymore, remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:03:48 +03:00
Laurent Pinchart
15b181a309 drm: rcar-du: Clear handled event pointer in CRTC state
The atomic commit helper requires drivers to clear the event pointer
stored in the CRTC state when the event is handled. In preparation to
using the helper, fix the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:03:47 +03:00
Laurent Pinchart
6dd47cfd03 drm: rcar-du: Handle event when disabling CRTCs
The driver currently handles vblank events only when updating planes on
a CRTC. The atomic update API however allows requesting an event when
disabling a CRTC. This currently leads to event objects being leaked in
the kernel and to events not being sent out. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:03:45 +03:00
Wolfram Sang
9e7d80e648 drm: rcar-du: Don't open code of_device_get_match_data()
This change will also make Coverity happy by avoiding a theoretical NULL
pointer dereference; yet another reason is to use the above helper function
to tighten the code and make it more readable.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-04 17:03:43 +03:00
Laurent Pinchart
e79a7dfafa drm: rcar-du: Switch to encoder .atomic_mode_set() helper function
The native encoder mode set helper function for atomic drivers is
.atomic_mode_set(). Replace the legacy .mode_set() implementation.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:03:41 +03:00
Laurent Pinchart
7c9dff5bd6 drm: panels: Add LVDS panel driver
This driver supports LVDS panels that don't require device-specific
handling of power supplies or control signals. It implements automatic
backlight handling if the panel is attached to a backlight controller.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:03:35 +03:00
Laurent Pinchart
5ec1a96010 drm: Add data transmission order bus flag
The flags indicate whether data is transmitted LSB to MSB or MSB to LSB
on the bus.

The exact meaning is bus-type dependent. For instance, for LVDS buses
the flags indicate whether the seven data bits transmitted in a clock
pulse are sent in normal order (MSB to LSB, slots 0 to 6) or reverse
order (LSB to MSB, slots 6 to 0).

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
2017-04-04 17:03:30 +03:00
Laurent Pinchart
0b5a3042b7 devicetree/bindings: display: Add bindings for two Mitsubishi panels
The AA104XD12 and AA121TD01 are LVDS display panels. Their bindings are
modelled on the the LVDS panel bindings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
2017-04-04 17:03:28 +03:00
Laurent Pinchart
4c8ccbc42c devicetree/bindings: display: Add bindings for LVDS panels
LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A.
Multiple incompatible data link layers have been used over time to
transmit image data to LVDS panels. This binding supports display panels
compatible with the JEIDA-59-1999, Open-LDI and VESA SWPG
specifications.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
2017-04-04 17:03:26 +03:00
Laurent Pinchart
14da3ed8dd devicetree/bindings: display: Document common panel properties
Document properties common to several display panels in a central
location that can be referenced by the panel device tree bindings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
2017-04-04 17:03:23 +03:00
Lucas Stach
3d1df96ad4 drm/imx: merge imx-drm-core and ipuv3-crtc in one module
While it is possible to hook other CRTC implementations into imx-drm
in practice there are none yet and the option to disable ipuv3-crtc
support has been hidden for a long time.

Now that the imx-drm-core has learned to deal with some of the
specifics of IPUv3 there is a cyclic dependency between both parts.
To get rid of this and to decimate the Kconfig maze a bit, simply
merge both parts into one module.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-04-04 10:59:08 +02:00
Lucas Stach
30310c835f gpu: ipu-v3: don't depend on DRM being enabled
The PRE/PRG drivers, which need the DRM infrastructure, are only used
from the output path, so we skip building them into the ipu-v3 driver
if CONFIG_DRM is not enabled.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-04-04 10:58:56 +02:00
Dave Airlie
e1b489d207 omapdrm changes for 4.12
Main changes include:
 
 * Add support for render nodes.
 * Refactor omapdss code to allow multiple DISPC implementations. This is pre-work for DSS6 support.
 * Fix replication logic bug, which caused RGB565 fb to be shown too dark on a 24bit display.
 * Improve detection of display stack readiness, which should remove the probe order issues.
 * Link panel-dpi with its backlight, so that they are turned on/off in sync.
 * Fix possibly incorrect setup of sync and data-enable signals.
 * Get rid of DRM_OMAP_NUM_CRTCS config option.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJY4h+/AAoJEPo9qoy8lh71PW4P/RtFifJ0TiykSQlIRiW2Uv/k
 n1qyT0lw4Xl5tjTIILD5B7P235R4uwx6VvzKLYDmeWVPV+CyViNn3moEVm6ZlRXA
 uLT/XmsseyrFWBqRXtv1w9kkmdaYMtz2u59rCzV6btqFaYiFLbzxmPlnxgYVOWjW
 v1RT2FuAXg0tNRpSgLrg4/QMwxItij+Xf/lkgRJoGnZPANfnW8wXrXlf9hiETsIK
 5Tu1iZuXiu+llxFdMeLxuAy7Z1dhRc9sdvnytoWrKd/L5GLo7S+l2OaTqM/MhMMi
 Kt0f2NOdWbXx+UYZjaquOW0t3MIl9pivk/N+xlM6e4m0LF/4ik3lJTUR9+MwjOcG
 tjvVEmw3k7awB0MjQIUJkRxxjjwZQ5Cn8SGKY8fA7XwAPhRVKooK1YiQwdGsJsAl
 ldr2yOD11W9no86AK13N+vT51R8rN/jUsWgsQyAb+JN7ArwCAD7bL9bm+0NFKIL6
 el/MD7BqnnL9gEAqt2hSFmdQhZY44CTN8s6sm8B6o0Tx74OsAy4AgLE/vLFwatVX
 3TeLIsbqILlyuhyIme3CMeA7vlFWTzTxWdIXoChdpkWWm7Y8tPuGwTcsm2wOxT0r
 8Y5qYER6sLdctMyoJQwfh1N2sPaDqC+EQcn48+gzl7SQXKSnd3PozwrQy0AbZdtY
 VG6gXTV0lAcurgcJs/yR
 =iaf8
 -----END PGP SIGNATURE-----

Merge tag 'omapdrm-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next

omapdrm changes for 4.12

Main changes include:

* Add support for render nodes.
* Refactor omapdss code to allow multiple DISPC implementations. This is pre-work for DSS6 support.
* Fix replication logic bug, which caused RGB565 fb to be shown too dark on a 24bit display.
* Improve detection of display stack readiness, which should remove the probe order issues.
* Link panel-dpi with its backlight, so that they are turned on/off in sync.
* Fix possibly incorrect setup of sync and data-enable signals.
* Get rid of DRM_OMAP_NUM_CRTCS config option.

* tag 'omapdrm-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (34 commits)
  drm/omap: Major omap_modeset_init() cleanup
  drm/omap: Remove the obsolete #define omap_plane _omap_plane hack
  drm/omap: Fix one ugly indentation style break left by coccinelle
  drm/omap: Rename enum omap_plane to enum omap_plane_id
  drm/omap: Get rid of DRM_OMAP_NUM_CRTCS config option
  drm/omap: fix crash on module unload
  drm/omap: use drm_atomic_helper_shutdown()
  drm/omap: fix display SYNC/DE flags
  drm/omap: dispc: improve debug print of display flags
  drm/omap: displays: panel-dpi: Support for handling backlight devices
  drm/omap: poll only connectors where the connect/disconnect can be checked
  drm/omap: display: Add displays in sorted order to the panel_list
  drm/omap: Use omapdss_stack_is_ready() to check that the display stack is up
  drm/omap: dss: Support for detecting display stack readiness
  drm/omap: dss: Functions to check components in the display/output list
  drm/omap: fix replication logic
  drm/omap: remove unused dispc_wb_enable & dispc_wb_is_enabled
  drm/omap: remove all EXPORT_SYMBOLs from dispc.c
  drm/omap: use dispc_ops
  drm/omap: fill dispc_ops
  ...
2017-04-04 05:45:49 +10:00
Jyri Sarha
e8e13b1521 drm/omap: Major omap_modeset_init() cleanup
Cleanup overly complex omap_modeset_init(). The function is trying to
support many unusual configuration, that have never been tested and
are not supported by other parts of the dirver.

After cleanup the init function creates exactly one connector,
encoder, crtc, and primary plane per each connected dss-device. Each
connector->encoder->crtc chain is expected to be separate and each
crtc is connect to a single dss-channel. If the configuration does not
match the expectations or exceeds the available resources, the
configuration is rejected.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Jyri Sarha
694c99cf6f drm/omap: Remove the obsolete #define omap_plane _omap_plane hack
Remove the obsolete "#define omap_plane _omap_plane" hack and other
related hacks to get around the enum omap_plane colliding with struct
omap_plane.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Jyri Sarha
273ffeaf8c drm/omap: Fix one ugly indentation style break left by coccinelle
Fix one ugly indentation style break left by the previous coccilnelle
patch.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Jyri Sarha
864050c78e drm/omap: Rename enum omap_plane to enum omap_plane_id
The enum omap_plane conflicted with the same struct name for omapdrm
plane private data. This rename should solve the conflict.

The rename was implement with this very simple coccinelle patch:
------------------------
@@
@@
enum
-omap_plane
+omap_plane_id
------------------------
The patch was applied like this:
spatch --sp-file <cocci_file> --all-includes --in-place --dir drivers/gpu/drm/omapdrm

The above patch did not rename the actual enum definition. That was
added manually on top of the spatch changes.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Jyri Sarha
f1118b893e drm/omap: Get rid of DRM_OMAP_NUM_CRTCS config option
Allocate one CRTC for each connected output and get rid of
DRM_OMAP_NUM_CRTCS config option. We still can not create more CRTCs
than we have DSS display managers. We also reserve one overlay per
CRTC for primary plane so we can not have more CRTCs than we have
overlays either.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
c9af3ed731 drm/omap: fix crash on module unload
When unloading omapdrm we get a NULL pointer deref in
omap_drm_irq_uninstall(). This is caused by:

967dd48417 ("drm: remove
drm_vblank_no_hw_counter assignment from driver code")

We shut down all the crtcs at unload time before calling
omap_drm_irq_uninstall, so the code in omap_drm_irq_uninstall() is
unnecessary and can be removed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
8a54aa9285 drm/omap: use drm_atomic_helper_shutdown()
Use drm_atomic_helper_shutdown() to ensure that all crtcs are disabled
when unloading the driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
50fa9f0bb8 drm/omap: fix display SYNC/DE flags
At the moment VSYNC/HSYNC/DE high/low flags set by the panel/encoder
drivers get lost when the videotimings are translated to DRM's
videomode, as DRM's mode does not have corresponding flags.

DRM has bus-flags for this purpose, and while it lacks a few flags at
the moment, it should be used here. However, until we rewrite omapdrm's
device model, using bus-flags is rather difficult.

As a short term fix, this patch makes sure that every time the videomode
is set in omap_crtc_mode_set_nofb(), the driver asks for the SYNC/DE
flags from the panel/encoder drivers, and thus we get the correct flags
into use.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
956d4f9308 drm/omap: dispc: improve debug print of display flags
Instead of printing 0/1 for display flags like vsync high/low, use a
tri-state print (-1/0/1) to indicate the "undefined" state.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Peter Ujfalusi
39135a305a drm/omap: displays: panel-dpi: Support for handling backlight devices
The associated backlight device can be configured via DT by providing the
phandle to the device.

If the backlight device is configured, the driver can manage the backligt
along with the panel's power state, iow it can turn on the backlight when
the panel is enabled and turn it off when the panel is disabled.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Peter Ujfalusi
4573ebe5ec drm/omap: poll only connectors where the connect/disconnect can be checked
When the connector associated detect callback is not provided, we can not
detect if the display is connected or disconnected. These displays do not
support hot plug, they are always connected. Let DRM know that connectors
w/o detect callback should not be polled.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03 12:36:40 +03:00
Peter Ujfalusi
389c5763be drm/omap: display: Add displays in sorted order to the panel_list
Keep the panel_list ordered according to aliases. The DRM connectors will
be created following the panel_list. By keeping the list ordered the DRM
connectors will be created in the same order regardless of the driver
probe order.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Peter Ujfalusi
a09d2bc150 drm/omap: Use omapdss_stack_is_ready() to check that the display stack is up
Instead of 'guessing' based on aliases of the status of the DSS drivers,
use the new interface to check that all needed drivers are loaded.
In this way we can be sure that all needed drivers are loaded so it is
safe to continue the probing of omapdrm.
This method will allow the omapdrm to be probed 'headless', without
outputs.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Peter Ujfalusi
1e08c82268 drm/omap: dss: Support for detecting display stack readiness
When omapdss is loaded (all core components are in place) create a list of
devices used in the display graph. This list later can be used by omapdrm
via the omapdss_stack_is_ready() function to check that these components
are loaded. Based on this information, omapdrm can defer probe in case when
the omapdss stack is not ready yet.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Peter Ujfalusi
7c79e8d67f drm/omap: dss: Functions to check components in the display/output list
The functions can be used to check a component (by it's of_node) if it is
part of the omapdss display or output list. If the component is found, it
means that the driver is loaded.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
be2d68c69e drm/omap: fix replication logic
DSS uses "replication logic" to convert color components from smaller
bit widths to bigger bit widths. Without replication logic, the color
component would be shifted and the least significant bits would be left
at 0, whereas with replication logic, the least significat bits will be
filled with the most significant bit.

For some reason omapdrm leaves replication logic always to off, which,
in the most common case, means that showing 16-bit RGB colors on 24-bit
display gives a bit darker colors than expected.

The reset value of the replication logic bit is enabled, and it should
always be set, as there's no practical reason to disable it. This patch
removes the option to disable it from omapdrm, and always sets it to
enabled in dispc.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
b8480cab36 drm/omap: remove unused dispc_wb_enable & dispc_wb_is_enabled
Remove two unused WB functions.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
5034b1fa05 drm/omap: remove all EXPORT_SYMBOLs from dispc.c
omapdrm now uses dispc_ops instead of direct function calls so we can
remove all EXPORT_SYMBOLs from dispc. Most of the functions can also be
made static, but a few are used outside dispc.c.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
9f759225e4 drm/omap: use dispc_ops
Change omapdrm to get dispc_ops and use that to call the dispc functions
instead or direct function calls.

The change is very straightforward.

The only problem was in omap_crtc_init() which calls pipe2vbl(crtc), and
at that point of time the crtc->dev link, which is used to get the
dispc_ops, has not been set up yet. This patch makes omap_crtc_init()
skip the call to pipe2vbl() and instead calls
dispc_ops->mgr_get_vsync_irq() directly.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
a1a37647d2 drm/omap: fill dispc_ops
This patch changes the current omapdss driver to fill a dispc_ops struct
and set it to omapdss-base.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
8a13398c3f drm/omap: add dispc_ops
We want to change the dispc API from plain functions to a struct with
functions pointers, so that omapdrm can call either omapdss or omapdss6
depending on the platform.

This patch adds 'struct dispc_ops' and adds functions to omapdss-base
to set and get the ops.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
c283400aa5 drm/omap: move dispc related dss-feat funcs to dispc
omapdrm still uses a few non-dispc functions: dss_feat_get_num_mgrs(),
dss_feat_get_num_ovls() and  dss_feat_get_supported_color_modes(). We
want to provide omapdrm a single dispc_ops function pointer struct so
that omapdrm will use either the current omapdss or the new omapdss6
driver depending on the platform.

Those three functions are really dispc functions, but are located in the
dss_features.c for legacy reasons.

This patch adds similar functionss to the dispc, and changes omapdrm to
use those new functions. Underneath the functions still call the
functions from dss_feature.c.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
82e83f67a9 drm/omap: move display, dss-of, output to omapdss-base
This patch moves the common parts of omapdss to omapdss-base so that
both the current omapdss driver and the new omapdss6 driver can use
them.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
892fdcb05e drm/omap: display: don't use dsi_get_pixel_size()
display.c uses dsi_get_pixel_size() which is implemented in the DSI
driver, and we won't have that in the omapdss-base module, to which we
want to move display.c

This patch changes display.c not to use dsi_get_pixel_size(). The call
can be replaced with a simple check for OMAP_DSS_DSI_FMT_RGB565.

We can also make dsi_get_pixel_size() static as it's no longer used
outside dsi.c.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
39637e1003 drm/omap: output: use dev_err instead of DSSERR
We don't have omapdss's custom error printing functions in the common
omapdss-base module, to which we want to move output.c.

This patch changes output.c to use dev_err instead of DSSERR so that it
doesn't depend on DSSERR.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
7c29971629 drm/omap: move dss_initialized to omapdss-base
omapdss_is_initialized() is used to find out if omapdss has been probed
successfully. This patch moves the related code to the common
omapdss-base module, so that the same support will be there for both
omapdss and omapdss6.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
a99ac0d9f6 drm/omap: add omapdss-base.ko
We are working towards enabling omapdss6, which will consists of a new
dss, dispc and dpi drivers. omapdss6 will be a new module. The panel,
encoder and omapdrm will need to use either the current omapdss driver
or the new omapdss6 driver, depending on the platform.

This will be implemented with a common base module and function
pointers.

This patch adds a skeleton omapdss-base.ko module, to which we'll be
moving common dss functionality like registration of the panels.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
d5e7efad7b drm/omap: fix HDMI sync polarities
While implementing writeback support, odd behavior of WBDELAYCOUNT was
observed with the combination of WB capture and HDMI. The result of the
debugging was that the HDMI sync polarities are not set correctly.

The current code sets the sync polarities going from HDMI WP to DISPC
according to the video mode used, which seems to work normally fine, but
causes problems with WB as WB expects the syncs to be active-high.

This patch changes the HDMI sync polarities so that the DISPC always
gets active-high syncs from HDMI WP, and the HDMI core gets sync
polarities according to the used video mode.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03 12:36:40 +03:00
Hemant Hariyani
5f6ab8ca18 drm/omap: Add support for render nodes
Add support for render nodes in omap driver and allow required
ioctls to be accessible via render nodes.

This enables unprivileged clients to allocate resources like GEM buffers
for rendering their content into. Mode setting (KMS ioctls) is not
allowed using render nodes. These buffers are then shared with
a previleged process (e.g compositor) that has mode setting access.

An example of this use case is Android where the hardware composer is
the only master and has mode setting access. Every other client then
uses render node(e.g /dev/dri/renderD128 to allocate and use its buffers.

Signed-off-by: Hemant Hariyani <hemanthariyani@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
7bbdef2b4b drm/omap: improve DPI clock selection on DRA7xx
The clock source selection for the LCD outputs is too hardcoded at the
moment. For example, LCD3 is set to use PLL2_1, and PLL2 doesn't exist
on DRA72x SoCs.

There are quite many ways to configure the clocks, even using HDMI PLL
for LCD outputs, but enabling full configuration of the clocks is rather
tricky.

This patch improves the situation a bit by checking if the PLL about to
be used exists, and if not, tries another one.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
1e90711d23 drm/omap: decrease min width & height
mode_config's min_width and min_height are both set to 32, which is
overly restrictive.

The real limits depend on whether we're configuring a crtc or a plane,
but a limit of 8x2 is safe for both cases.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
0e81798e21 drm/omap: remove divider constraint from hsdiv
The driver only uses even dividers for hsdiv when pclk >= 100MHz, as odd
dividers can create uneven duty cycle. However, while this holds true
for some dividers like DISPC's LCK and PCK dividers, it is not actually
true for hsdiv.

hsdiv always produces even duty cycle, so the constraint can be removed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
7e3d92749d drm/omap: refactor CRTC HW property setup
The current driver doesn't expose any of the CRTC HW properties like
background color or transparency key, and sets them at CRTC enable time.

Refactor this into a separate function and call that function from
omap_crtc_atomic_flush(). This is the behavior we want when the
properties can be configured, so this patch makes it easier to add
patches later which implement those properties.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03 12:36:40 +03:00
Tomi Valkeinen
7d267f068a drm/omap: work-around for errata i886
DRA7 errata i886 (FPDLink PLL Unlocks With Certain SoC PLL M/N Values)
says that FPDLink is sensitive to jitter on the vout clock, and that low
PLL M and N values result in more jitter than high M and N values.

This patch implements a workaround for the problem by changing the PLL
setup to search for clocks starting from high M and N values, instead of
low values. This should not cause any functional change, and only
reduces the jitter.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03 12:36:40 +03:00
Dave Airlie
320d8c3d38 Merge tag 'drm-misc-next-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc into drm-next
drm-misc for 4.12:

Core:
- Removed some fb subsampling dimension checks from core (Ville)
- Some MST slot cleanup (Dhinakaran)
- Extracted drm_debugfs.h & drm_ioctl.h from drmP.h (Daniel)
- Added drm_atomic_helper_shutdown() to compliment suspend/resume counterparts
  (Daniel)
- Pipe context through legacy modeset to remove legacy_backoff nasties (Daniel)
- Cleanups around vblank as well as allowing lockless counter reads (Chris W.)
- VGA Switcheroo added to MAINTAINERS with Lukas Wunner as reviewer (Lukas)

Drivers:
- Enhancements to rockchip driver probe (Jeffy) and dsi (Chris Z.)
- Thunderbolt external GPU awareness added (Lukas)

* tag 'drm-misc-next-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc: (63 commits)
  apple-gmux: Don't switch external DP port on 2011+ MacBook Pros
  drm/nouveau: Don't register Thunderbolt eGPU with vga_switcheroo
  drm/amdgpu: Don't register Thunderbolt eGPU with vga_switcheroo
  drm/radeon: Don't register Thunderbolt eGPU with vga_switcheroo
  PCI: Recognize Thunderbolt devices
  MAINTAINERS: Add Lukas Wunner as reviewer for vga_switcheroo
  drm: Fix locking gotcha in page_flip ioctl
  drm: Clarify the role of plane_state argument to drm_simple update().
  drm: Clear e after kfree in drm_mode_page_flip_ioctl
  drm: Convert cmpxchg(bool) back to a two step operation
  drm/bridge: ti-tfp410: support hpd via gpio
  drm: use .hword to represent 16-bit numbers
  Revert unrelated part of "drm: simplify the locking in the GETCRTC ioctl"
  drm: Fixup failure paths in drm_atomic_helper_set_config
  drm: Peek at the current counter/timestamp for vblank queries
  drm: Refactor vblank sequence number comparison
  drm: vblank cannot be enabled if dev->irq_enabled is false
  drm: Mark up accesses of vblank->enabled outside of its spinlock
  drm: Make the decision to keep vblank irq enabled earlier
  drm/atomic-helper: Remove the backoff hack from set_config
  ...
2017-04-03 16:30:24 +10:00
Dave Airlie
7558ab6642 Merge branch 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux into drm-next
This series enables atomic mode set for vmwgfx.  A number of features and
larger fixes are also included.

* 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux: (22 commits)
  drm/vmwgfx: Properly check display/scanout surface size
  drm/vmwgfx: Support topology greater than texture size
  drm/vmwgfx: Define an overlaid handle_close ioctl.
  drm/vmwgfx: Re-implement the stream resource as a simple resource.
  drm/vmwgfx: Introduce a simple resource type
  drm/vmwgfx: Revert "drm/vmwgfx: Replace numeric parameter like 0444 with macro"
  drm/vmwgfx: Fix LDU X blank screen until mode change issue
  drm/vmwgfx: Skipping fbdev fb pinning for ldu
  drm/vmwgfx: Explicityly track screen target width and height
  drm/vmwgfx: Turn on DRIVER_ATOMIC flag
  drm/vmwgfx: Switch over to internal atomic API for SOU and LDU
  drm/vmwgfx: Switch over to internal atomic API for STDU
  drm/vmwgfx: Fixes to vmwgfx_fb
  drm/vmwgfx: Add and connect atomic state object check/commit
  drm/vmwgfx: Add and connect connector helper function
  drm/vmwgfx: Add and connect plane helper functions
  drm/vmwgfx: Add and connect CRTC helper functions
  drm/vmwgfx: Connector atomic state
  drm/vmwgfx: Plane atomic state
  drm/vmwgfx: CRTC atomic state
  ...
2017-04-02 16:10:55 +10:00