Commit Graph

234 Commits

Author SHA1 Message Date
Qian Cai
7e0cc01ea1 mm/swap.c: annotate data races for lru_rotate_pvecs
Read to lru_add_pvec->nr could be interrupted and then write to the same
variable.  The write has local interrupt disabled, but the plain reads
result in data races.  However, it is unlikely the compilers could do much
damage here given that lru_add_pvec->nr is a "unsigned char" and there is
an existing compiler barrier.  Thus, annotate the reads using the
data_race() macro.  The data races were reported by KCSAN,

 BUG: KCSAN: data-race in lru_add_drain_cpu / rotate_reclaimable_page

 write to 0xffff9291ebcb8a40 of 1 bytes by interrupt on cpu 23:
  rotate_reclaimable_page+0x2df/0x490
  pagevec_add at include/linux/pagevec.h:81
  (inlined by) rotate_reclaimable_page at mm/swap.c:259
  end_page_writeback+0x1b5/0x2b0
  end_swap_bio_write+0x1d0/0x280
  bio_endio+0x297/0x560
  dec_pending+0x218/0x430 [dm_mod]
  clone_endio+0xe4/0x2c0 [dm_mod]
  bio_endio+0x297/0x560
  blk_update_request+0x201/0x920
  scsi_end_request+0x6b/0x4a0
  scsi_io_completion+0xb7/0x7e0
  scsi_finish_command+0x1ed/0x2a0
  scsi_softirq_done+0x1c9/0x1d0
  blk_done_softirq+0x181/0x1d0
  __do_softirq+0xd9/0x57c
  irq_exit+0xa2/0xc0
  do_IRQ+0x8b/0x190
  ret_from_intr+0x0/0x42
  delay_tsc+0x46/0x80
  __const_udelay+0x3c/0x40
  __udelay+0x10/0x20
  kcsan_setup_watchpoint+0x202/0x3a0
  __tsan_read1+0xc2/0x100
  lru_add_drain_cpu+0xb8/0x3f0
  lru_add_drain+0x25/0x40
  shrink_active_list+0xe1/0xc80
  shrink_lruvec+0x766/0xb70
  shrink_node+0x2d6/0xca0
  do_try_to_free_pages+0x1f7/0x9a0
  try_to_free_pages+0x252/0x5b0
  __alloc_pages_slowpath+0x458/0x1290
  __alloc_pages_nodemask+0x3bb/0x450
  alloc_pages_vma+0x8a/0x2c0
  do_anonymous_page+0x16e/0x6f0
  __handle_mm_fault+0xcd5/0xd40
  handle_mm_fault+0xfc/0x2f0
  do_page_fault+0x263/0x6f9
  page_fault+0x34/0x40

 read to 0xffff9291ebcb8a40 of 1 bytes by task 37761 on cpu 23:
  lru_add_drain_cpu+0xb8/0x3f0
  lru_add_drain_cpu at mm/swap.c:602
  lru_add_drain+0x25/0x40
  shrink_active_list+0xe1/0xc80
  shrink_lruvec+0x766/0xb70
  shrink_node+0x2d6/0xca0
  do_try_to_free_pages+0x1f7/0x9a0
  try_to_free_pages+0x252/0x5b0
  __alloc_pages_slowpath+0x458/0x1290
  __alloc_pages_nodemask+0x3bb/0x450
  alloc_pages_vma+0x8a/0x2c0
  do_anonymous_page+0x16e/0x6f0
  __handle_mm_fault+0xcd5/0xd40
  handle_mm_fault+0xfc/0x2f0
  do_page_fault+0x263/0x6f9
  page_fault+0x34/0x40

 2 locks held by oom02/37761:
  : ffff9281e5928808 (&mm->mmap_sem#2){++++}, at: do_page_fault
  : ffffffffb3ade380 (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part
 irq event stamp: 1949217
 trace_hardirqs_on_thunk+0x1a/0x1c
 __do_softirq+0x2e7/0x57c
 __do_softirq+0x34c/0x57c
 irq_exit+0xa2/0xc0

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 23 PID: 37761 Comm: oom02 Not tainted 5.6.0-rc3-next-20200226+ 
 Hardware name: HP ProLiant BL660c Gen9, BIOS I38 10/17/2018

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Marco Elver <elver@google.com>
Link: http://lkml.kernel.org/r/20200228044018.1263-1-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14 19:56:57 -07:00
Matthew Wilcox (Oracle)
6c357848b4 mm: replace hpage_nr_pages with thp_nr_pages
The thp prefix is more frequently used than hpage and we should be
consistent between the various functions.

[akpm@linux-foundation.org: fix mm/migrate.c]

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20200629151959.15779-6-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14 19:56:56 -07:00
Joonsoo Kim
b518154e59 mm/vmscan: protect the workingset on anonymous LRU
In current implementation, newly created or swap-in anonymous page is
started on active list.  Growing active list results in rebalancing
active/inactive list so old pages on active list are demoted to inactive
list.  Hence, the page on active list isn't protected at all.

Following is an example of this situation.

Assume that 50 hot pages on active list.  Numbers denote the number of
pages on active/inactive list (active | inactive).

1. 50 hot pages on active list
50(h) | 0

2. workload: 50 newly created (used-once) pages
50(uo) | 50(h)

3. workload: another 50 newly created (used-once) pages
50(uo) | 50(uo), swap-out 50(h)

This patch tries to fix this issue.  Like as file LRU, newly created or
swap-in anonymous pages will be inserted to the inactive list.  They are
promoted to active list if enough reference happens.  This simple
modification changes the above example as following.

1. 50 hot pages on active list
50(h) | 0

2. workload: 50 newly created (used-once) pages
50(h) | 50(uo)

3. workload: another 50 newly created (used-once) pages
50(h) | 50(uo), swap-out 50(uo)

As you can see, hot pages on active list would be protected.

Note that, this implementation has a drawback that the page cannot be
promoted and will be swapped-out if re-access interval is greater than the
size of inactive list but less than the size of total(active+inactive).
To solve this potential issue, following patch will apply workingset
detection similar to the one that's already applied to file LRU.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Link: http://lkml.kernel.org/r/1595490560-15117-3-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:57:55 -07:00
Kees Cook
3f649ab728 treewide: Remove uninitialized_var() usage
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.

In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:

git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
	xargs perl -pi -e \
		's/\buninitialized_var\(([^\)]+)\)/\1/g;
		 s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'

drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.

No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.

[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/

Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-16 12:35:15 -07:00
Joonsoo Kim
cb6868832e mm/swap: fix for "mm: workingset: age nonresident information alongside anonymous pages"
Non-file-lru page could also be activated in mark_page_accessed() and we
need to count this activation for nonresident_age.

Note that it's better for this patch to be squashed into the patch "mm:
workingset: age nonresident information alongside anonymous pages".

Link: http://lkml.kernel.org/r/1592288204-27734-3-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-26 00:27:38 -07:00
Shakeel Butt
21e330fc63 mm: swap: memcg: fix memcg stats for huge pages
The commit 2262185c5b ("mm: per-cgroup memory reclaim stats") added
PGLAZYFREE, PGACTIVATE & PGDEACTIVATE stats for cgroups but missed
couple of places and PGLAZYFREE missed huge page handling. Fix that.
Also for PGLAZYFREE use the irq-unsafe function to update as the irq is
already disabled.

Fixes: 2262185c5b ("mm: per-cgroup memory reclaim stats")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: http://lkml.kernel.org/r/20200527182947.251343-1-shakeelb@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:49 -07:00
Shakeel Butt
5d91f31faf mm: swap: fix vmstats for huge pages
Many of the callbacks called by pagevec_lru_move_fn() does not correctly
update the vmstats for huge pages. Fix that. Also __pagevec_lru_add_fn()
use the irq-unsafe alternative to update the stat as the irqs are
already disabled.

Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: http://lkml.kernel.org/r/20200527182916.249910-1-shakeelb@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:49 -07:00
Johannes Weiner
96f8bf4fb1 mm: vmscan: reclaim writepage is IO cost
The VM tries to balance reclaim pressure between anon and file so as to
reduce the amount of IO incurred due to the memory shortage.  It already
counts refaults and swapins, but in addition it should also count
writepage calls during reclaim.

For swap, this is obvious: it's IO that wouldn't have occurred if the
anonymous memory hadn't been under memory pressure.  From a relative
balancing point of view this makes sense as well: even if anon is cold and
reclaimable, a cache that isn't thrashing may have equally cold pages that
don't require IO to reclaim.

For file writeback, it's trickier: some of the reclaim writepage IO would
have likely occurred anyway due to dirty expiration.  But not all of it -
premature writeback reduces batching and generates additional writes.
Since the flushers are already woken up by the time the VM starts writing
cache pages one by one, let's assume that we'e likely causing writes that
wouldn't have happened without memory pressure.  In addition, the per-page
cost of IO would have probably been much cheaper if written in larger
batches from the flusher thread rather than the single-page-writes from
kswapd.

For our purposes - getting the trend right to accelerate convergence on a
stable state that doesn't require paging at all - this is sufficiently
accurate.  If we later wanted to optimize for sustained thrashing, we can
still refine the measurements.

Count all writepage calls from kswapd as IO cost toward the LRU that the
page belongs to.

Why do this dynamically?  Don't we know in advance that anon pages require
IO to reclaim, and so could build in a static bias?

First, scanning is not the same as reclaiming.  If all the anon pages are
referenced, we may not swap for a while just because we're scanning the
anon list.  During this time, however, it's important that we age
anonymous memory and the page cache at the same rate so that their
hot-cold gradients are comparable.  Everything else being equal, we still
want to reclaim the coldest memory overall.

Second, we keep copies in swap unless the page changes.  If there is
swap-backed data that's mostly read (tmpfs file) and has been swapped out
before, we can reclaim it without incurring additional IO.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-14-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:49 -07:00
Johannes Weiner
7cf111bc39 mm: vmscan: determine anon/file pressure balance at the reclaim root
We split the LRU lists into anon and file, and we rebalance the scan
pressure between them when one of them begins thrashing: if the file cache
experiences workingset refaults, we increase the pressure on anonymous
pages; if the workload is stalled on swapins, we increase the pressure on
the file cache instead.

With cgroups and their nested LRU lists, we currently don't do this
correctly.  While recursive cgroup reclaim establishes a relative LRU
order among the pages of all involved cgroups, LRU pressure balancing is
done on an individual cgroup LRU level.  As a result, when one cgroup is
thrashing on the filesystem cache while a sibling may have cold anonymous
pages, pressure doesn't get equalized between them.

This patch moves LRU balancing decision to the root of reclaim - the same
level where the LRU order is established.

It does this by tracking LRU cost recursively, so that every level of the
cgroup tree knows the aggregate LRU cost of all memory within its domain.
When the page scanner calculates the scan balance for any given individual
cgroup's LRU list, it uses the values from the ancestor cgroup that
initiated the reclaim cycle.

If one sibling is then thrashing on the cache, it will tip the pressure
balance inside its ancestors, and the next hierarchical reclaim iteration
will go more after the anon pages in the tree.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-13-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:49 -07:00
Johannes Weiner
314b57fb04 mm: balance LRU lists based on relative thrashing
Since the LRUs were split into anon and file lists, the VM has been
balancing between page cache and anonymous pages based on per-list ratios
of scanned vs.  rotated pages.  In most cases that tips page reclaim
towards the list that is easier to reclaim and has the fewest actively
used pages, but there are a few problems with it:

1. Refaults and LRU rotations are weighted the same way, even though
   one costs IO and the other costs a bit of CPU.

2. The less we scan an LRU list based on already observed rotations,
   the more we increase the sampling interval for new references, and
   rotations become even more likely on that list. This can enter a
   death spiral in which we stop looking at one list completely until
   the other one is all but annihilated by page reclaim.

Since commit a528910e12 ("mm: thrash detection-based file cache sizing")
we have refault detection for the page cache.  Along with swapin events,
they are good indicators of when the file or anon list, respectively, is
too small for its workingset and needs to grow.

For example, if the page cache is thrashing, the cache pages need more
time in memory, while there may be colder pages on the anonymous list.
Likewise, if swapped pages are faulting back in, it indicates that we
reclaim anonymous pages too aggressively and should back off.

Replace LRU rotations with refaults and swapins as the basis for relative
reclaim cost of the two LRUs.  This will have the VM target list balances
that incur the least amount of IO on aggregate.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-12-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:49 -07:00
Johannes Weiner
fbbb602e40 mm: deactivations shouldn't bias the LRU balance
Operations like MADV_FREE, FADV_DONTNEED etc.  currently move any affected
active pages to the inactive list to accelerate their reclaim (good) but
also steer page reclaim toward that LRU type, or away from the other
(bad).

The reason why this is undesirable is that such operations are not part of
the regular page aging cycle, and rather a fluke that doesn't say much
about the remaining pages on that list; they might all be in heavy use,
and once the chunk of easy victims has been purged, the VM continues to
apply elevated pressure on those remaining hot pages.  The other LRU,
meanwhile, might have easily reclaimable pages, and there was never a need
to steer away from it in the first place.

As the previous patch outlined, we should focus on recording actually
observed cost to steer the balance rather than speculating about the
potential value of one LRU list over the other.  In that spirit, leave
explicitely deactivated pages to the LRU algorithm to pick up, and let
rotations decide which list is the easiest to reclaim.

[cai@lca.pw: fix set-but-not-used warning]
  Link: http://lkml.kernel.org/r/20200522133335.GA624@Qians-MacBook-Air.local
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Qian Cai <cai@lca.pw>
Link: http://lkml.kernel.org/r/20200520232525.798933-10-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:49 -07:00
Johannes Weiner
1431d4d11a mm: base LRU balancing on an explicit cost model
Currently, scan pressure between the anon and file LRU lists is balanced
based on a mixture of reclaim efficiency and a somewhat vague notion of
"value" of having certain pages in memory over others.  That concept of
value is problematic, because it has caused us to count any event that
remotely makes one LRU list more or less preferrable for reclaim, even
when these events are not directly comparable and impose very different
costs on the system.  One example is referenced file pages that we still
deactivate and referenced anonymous pages that we actually rotate back to
the head of the list.

There is also conceptual overlap with the LRU algorithm itself.  By
rotating recently used pages instead of reclaiming them, the algorithm
already biases the applied scan pressure based on page value.  Thus, when
rebalancing scan pressure due to rotations, we should think of reclaim
cost, and leave assessing the page value to the LRU algorithm.

Lastly, considering both value-increasing as well as value-decreasing
events can sometimes cause the same type of event to be counted twice,
i.e.  how rotating a page increases the LRU value, while reclaiming it
succesfully decreases the value.  In itself this will balance out fine,
but it quietly skews the impact of events that are only recorded once.

The abstract metric of "value", the murky relationship with the LRU
algorithm, and accounting both negative and positive events make the
current pressure balancing model hard to reason about and modify.

This patch switches to a balancing model of accounting the concrete,
actually observed cost of reclaiming one LRU over another.  For now, that
cost includes pages that are scanned but rotated back to the list head.
Subsequent patches will add consideration for IO caused by refaulting of
recently evicted pages.

Replace struct zone_reclaim_stat with two cost counters in the lruvec, and
make everything that affects cost go through a new lru_note_cost()
function.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-9-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:48 -07:00
Johannes Weiner
9682468747 mm: remove use-once cache bias from LRU balancing
When the splitlru patches divided page cache and swap-backed pages into
separate LRU lists, the pressure balance between the lists was biased to
account for the fact that streaming IO can cause memory pressure with a
flood of pages that are used only once.  New page cache additions would
tip the balance toward the file LRU, and repeat access would neutralize
that bias again.  This ensured that page reclaim would always go for
used-once cache first.

Since e986850598 ("mm,vmscan: only evict file pages when we have
plenty"), page reclaim generally skips over swap-backed memory entirely as
long as there is used-once cache present, and will apply the LRU balancing
when only repeatedly accessed cache pages are left - at which point the
previous use-once bias will have been neutralized.  This makes the
use-once cache balancing bias unnecessary.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-7-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:48 -07:00
Johannes Weiner
6058eaec81 mm: fold and remove lru_cache_add_anon() and lru_cache_add_file()
They're the same function, and for the purpose of all callers they are
equivalent to lru_cache_add().

[akpm@linux-foundation.org: fix it for local_lock changes]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-5-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:48 -07:00
Johannes Weiner
5df741963d mm: fix LRU balancing effect of new transparent huge pages
The reclaim code that balances between swapping and cache reclaim tries to
predict likely reuse based on in-memory reference patterns alone.  This
works in many cases, but when it fails it cannot detect when the cache is
thrashing pathologically, or when we're in the middle of a swap storm.

The high seek cost of rotational drives under which the algorithm evolved
also meant that mistakes could quickly result in lockups from too
aggressive swapping (which is predominantly random IO).  As a result, the
balancing code has been tuned over time to a point where it mostly goes
for page cache and defers swapping until the VM is under significant
memory pressure.

The resulting strategy doesn't make optimal caching decisions - where
optimal is the least amount of IO required to execute the workload.

The proliferation of fast random IO devices such as SSDs, in-memory
compression such as zswap, and persistent memory technologies on the
horizon, has made this undesirable behavior very noticable: Even in the
presence of large amounts of cold anonymous memory and a capable swap
device, the VM refuses to even seriously scan these pages, and can leave
the page cache thrashing needlessly.

This series sets out to address this.  Since commit ("a528910e12ec mm:
thrash detection-based file cache sizing") we have exact tracking of
refault IO - the ultimate cost of reclaiming the wrong pages.  This allows
us to use an IO cost based balancing model that is more aggressive about
scanning anonymous memory when the cache is thrashing, while being able to
avoid unnecessary swap storms.

These patches base the LRU balance on the rate of refaults on each list,
times the relative IO cost between swap device and filesystem
(swappiness), in order to optimize reclaim for least IO cost incurred.

	History

I floated these changes in 2016.  At the time they were incomplete and
full of workarounds due to a lack of infrastructure in the reclaim code:
We didn't have PageWorkingset, we didn't have hierarchical cgroup
statistics, and problems with the cgroup swap controller.  As swapping
wasn't too high a priority then, the patches stalled out.  With all
dependencies in place now, here we are again with much cleaner,
feature-complete patches.

I kept the acks for patches that stayed materially the same :-)

Below is a series of test results that demonstrate certain problematic
behavior of the current code, as well as showcase the new code's more
predictable and appropriate balancing decisions.

	Test : No convergence

This test shows an edge case where the VM currently doesn't converge at
all on a new file workingset with a stale anon/tmpfs set.

The test sets up a cold anon set the size of 3/4 RAM, then tries to
establish a new file set half the size of RAM (flat access pattern).

The vanilla kernel refuses to even scan anon pages and never converges.
The file set is perpetually served from the filesystem.

The first test kernel is with the series up to the workingset patch
applied.  This allows thrashing page cache to challenge the anonymous
workingset.  The VM then scans the lists based on the current
scanned/rotated balancing algorithm.  It converges on a stable state where
all cold anon pages are pushed out and the fileset is served entirely from
cache:

			    noconverge/5.7-rc5-mm	noconverge/5.7-rc5-mm-workingset
Scanned			417719308.00 (    +0.00%)		64091155.00 (   -84.66%)
Reclaimed		417711094.00 (    +0.00%)		61640308.00 (   -85.24%)
Reclaim efficiency %	      100.00 (    +0.00%)		      96.18 (    -3.78%)
Scanned file		417719308.00 (    +0.00%)		59211118.00 (   -85.83%)
Scanned anon			0.00 (    +0.00%)	         4880037.00 (          )
Swapouts			0.00 (    +0.00%)	         2439957.00 (          )
Swapins				0.00 (    +0.00%)		     257.00 (          )
Refaults		415246605.00 (    +0.00%)		59183722.00 (   -85.75%)
Restore refaults		0.00 (    +0.00%)	        54988252.00 (          )

The second test kernel is with the full patch series applied, which
replaces the scanned/rotated ratios with refault/swapin rate-based
balancing.  It evicts the cold anon pages more aggressively in the
presence of a thrashing cache and the absence of swapins, and so converges
with about 60% of the IO and reclaim activity:

			noconverge/5.7-rc5-mm-workingset	noconverge/5.7-rc5-mm-lrubalance
Scanned				64091155.00 (    +0.00%)		37579741.00 (   -41.37%)
Reclaimed			61640308.00 (    +0.00%)		35129293.00 (   -43.01%)
Reclaim efficiency %		      96.18 (    +0.00%)		      93.48 (    -2.78%)
Scanned file			59211118.00 (    +0.00%)		32708385.00 (   -44.76%)
Scanned anon			 4880037.00 (    +0.00%)		 4871356.00 (    -0.18%)
Swapouts			 2439957.00 (    +0.00%)		 2435565.00 (    -0.18%)
Swapins				     257.00 (    +0.00%)		     262.00 (    +1.94%)
Refaults			59183722.00 (    +0.00%)		32675667.00 (   -44.79%)
Restore refaults		54988252.00 (    +0.00%)		28480430.00 (   -48.21%)

We're triggering this case in host sideloading scenarios: When a host's
primary workload is not saturating the machine (primary load is usually
driven by user activity), we can optimistically sideload a batch job; if
user activity picks up and the primary workload needs the whole host
during this time, we freeze the sideload and rely on it getting pushed to
swap.  Frequently that swapping doesn't happen and the completely inactive
sideload simply stays resident while the expanding primary worklad is
struggling to gain ground.

	Test : Kernel build

This test is a a kernel build that is slightly memory-restricted (make -j4
inside a 400M cgroup).

Despite the very aggressive swapping of cold anon pages in test , this
test shows that the new kernel carefully balances swap against cache
refaults when both the file and the cache set are pressured.

It shows the patched kernel to be slightly better at finding the coldest
memory from the combined anon and file set to evict under pressure.  The
result is lower aggregate reclaim and paging activity:

z				    5.7-rc5-mm	5.7-rc5-mm-lrubalance
Real time		   210.60 (    +0.00%)	   210.97 (    +0.18%)
User time		   745.42 (    +0.00%)	   746.48 (    +0.14%)
System time		    69.78 (    +0.00%)	    69.79 (    +0.02%)
Scanned file		354682.00 (    +0.00%)	293661.00 (   -17.20%)
Scanned anon		465381.00 (    +0.00%)	378144.00 (   -18.75%)
Swapouts		185920.00 (    +0.00%)	147801.00 (   -20.50%)
Swapins			 34583.00 (    +0.00%)	 32491.00 (    -6.05%)
Refaults		212664.00 (    +0.00%)	172409.00 (   -18.93%)
Restore refaults	 48861.00 (    +0.00%)	 80091.00 (   +63.91%)
Total paging IO		433167.00 (    +0.00%)	352701.00 (   -18.58%)

	Test : Overload

This next test is not about performance, but rather about the
predictability of the algorithm.  The current balancing behavior doesn't
always lead to comprehensible results, which makes performance analysis
and parameter tuning (swappiness e.g.) very difficult.

The test shows the balancing behavior under equivalent anon and file
input.  Anon and file sets are created of equal size (3/4 RAM), have the
same access patterns (a hot-cold gradient), and synchronized access rates.
Swappiness is raised from the default of 60 to 100 to indicate equal IO
cost between swap and cache.

With the vanilla balancing code, anon scans make up around 9% of the total
pages scanned, or a ~1:10 ratio.  This is a surprisingly skewed ratio, and
it's an outcome that is hard to explain given the input parameters to the
VM.

The new balancing model targets a 1:2 balance: All else being equal,
reclaiming a file page costs one page IO - the refault; reclaiming an anon
page costs two IOs - the swapout and the swapin.  In the test we observe a
~1:3 balance.

The scanned and paging IO numbers indicate that the anon LRU algorithm we
have in place right now does a slightly worse job at picking the coldest
pages compared to the file algorithm.  There is ongoing work to improve
this, like Joonsoo's anon workingset patches; however, it's difficult to
compare the two aging strategies when the balancing between them is
behaving unintuitively.

The slightly less efficient anon reclaim results in a deviation from the
optimal 1:2 scan ratio we would like to see here - however, 1:3 is much
closer to what we'd want to see in this test than the vanilla kernel's
aging of 10+ cache pages for every anonymous one:

			overload-100/5.7-rc5-mm-workingset	overload-100/5.7-rc5-mm-lrubalance-realfile
Scanned				 533633725.00 (    +0.00%)			  595687785.00 (   +11.63%)
Reclaimed			 494325440.00 (    +0.00%)			  518154380.00 (    +4.82%)
Reclaim efficiency %			92.63 (    +0.00%)				 86.98 (    -6.03%)
Scanned file			 484532894.00 (    +0.00%)			  456937722.00 (    -5.70%)
Scanned anon			  49100831.00 (    +0.00%)			  138750063.00 (  +182.58%)
Swapouts			   8096423.00 (    +0.00%)			   48982142.00 (  +504.98%)
Swapins				  10027384.00 (    +0.00%)			   62325044.00 (  +521.55%)
Refaults			 479819973.00 (    +0.00%)			  451309483.00 (    -5.94%)
Restore refaults		 426422087.00 (    +0.00%)			  399914067.00 (    -6.22%)
Total paging IO			 497943780.00 (    +0.00%)			  562616669.00 (   +12.99%)

	Test : Parallel IO

It's important to note that these patches only affect the situation where
the kernel has to reclaim workingset memory, which is usually a
transitionary period.  The vast majority of page reclaim occuring in a
system is from trimming the ever-expanding page cache.

These patches don't affect cache trimming behavior.  We never swap as long
as we only have use-once cache moving through the file LRU, we only
consider swapping when the cache is actively thrashing.

The following test demonstrates this.  It has an anon workingset that
takes up half of RAM and then writes a file that is twice the size of RAM
out to disk.

As the cache is funneled through the inactive file list, no anon pages are
scanned (aside from apparently some background noise of 10 pages):

					  5.7-rc5-mm		          5.7-rc5-mm-lrubalance
Scanned			    10714722.00 (    +0.00%)		       10723445.00 (    +0.08%)
Reclaimed		    10703596.00 (    +0.00%)		       10712166.00 (    +0.08%)
Reclaim efficiency %		  99.90 (    +0.00%)			     99.89 (    -0.00%)
Scanned file		    10714722.00 (    +0.00%)		       10723435.00 (    +0.08%)
Scanned anon			   0.00 (    +0.00%)			     10.00 (          )
Swapouts			   0.00 (    +0.00%)			      7.00 (          )
Swapins				   0.00 (    +0.00%)			      0.00 (    +0.00%)
Refaults			  92.00 (    +0.00%)			     41.00 (   -54.84%)
Restore refaults		   0.00 (    +0.00%)			      0.00 (    +0.00%)
Total paging IO			  92.00 (    +0.00%)			     48.00 (   -47.31%)

This patch (of 14):

Currently, THP are counted as single pages until they are split right
before being swapped out.  However, at that point the VM is already in the
middle of reclaim, and adjusting the LRU balance then is useless.

Always account THP by the number of basepages, and remove the fixup from
the splitting path.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-1-hannes@cmpxchg.org
Link: http://lkml.kernel.org/r/20200520232525.798933-2-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:48 -07:00
Matthew Wilcox (Oracle)
ff45fc3ca0 mm: simplify calling a compound page destructor
None of the three callers of get_compound_page_dtor() want to know the
value; they just want to call the function.  Replace it with
destroy_compound_page() which calls the dtor for them.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20200517105051.9352-1-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:47 -07:00
Ingo Molnar
b01b214199 mm/swap: Use local_lock for protection
The various struct pagevec per CPU variables are protected by disabling
either preemption or interrupts across the critical sections. Inside
these sections spinlocks have to be acquired.

These spinlocks are regular spinlock_t types which are converted to
"sleeping" spinlocks on PREEMPT_RT enabled kernels. Obviously sleeping
locks cannot be acquired in preemption or interrupt disabled sections.

local locks provide a trivial way to substitute preempt and interrupt
disable instances. On a non PREEMPT_RT enabled kernel local_lock() maps
to preempt_disable() and local_lock_irq() to local_irq_disable().

Create lru_rotate_pvecs containing the pagevec and the locallock.
Create lru_pvecs containing the remaining pagevecs and the locallock.
Add lru_add_drain_cpu_zone() which is used from compact_zone() to avoid
exporting the pvec structure.

Change the relevant call sites to acquire these locks instead of using
preempt_disable() / get_cpu() / get_cpu_var() and local_irq_disable() /
local_irq_save().

There is neither a functional change nor a change in the generated
binary code for non PREEMPT_RT enabled non-debug kernels.

When lockdep is enabled local locks have lockdep maps embedded. These
allow lockdep to validate the protections, i.e. inappropriate usage of a
preemption only protected sections would result in a lockdep warning
while the same problem would not be noticed with a plain
preempt_disable() based protection.

local locks also improve readability as they provide a named scope for
the protections while preempt/interrupt disable are opaque scopeless.

Finally local locks allow PREEMPT_RT to substitute them with real
locking primitives to ensure the correctness of operation in a fully
preemptible kernel.

[ bigeasy: Adopted to use local_lock ]

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200527201119.1692513-4-bigeasy@linutronix.de
2020-05-28 10:31:10 +02:00
Hugh Dickins
71725ed10c mm: huge tmpfs: try to split_huge_page() when punching hole
Yang Shi writes:

Currently, when truncating a shmem file, if the range is partly in a THP
(start or end is in the middle of THP), the pages actually will just get
cleared rather than being freed, unless the range covers the whole THP.
Even though all the subpages are truncated (randomly or sequentially), the
THP may still be kept in page cache.

This might be fine for some usecases which prefer preserving THP, but
balloon inflation is handled in base page size.  So when using shmem THP
as memory backend, QEMU inflation actually doesn't work as expected since
it doesn't free memory.  But the inflation usecase really needs to get the
memory freed.  (Anonymous THP will also not get freed right away, but will
be freed eventually when all subpages are unmapped: whereas shmem THP
still stays in page cache.)

Split THP right away when doing partial hole punch, and if split fails
just clear the page so that read of the punched area will return zeroes.

Hugh Dickins adds:

Our earlier "team of pages" huge tmpfs implementation worked in the way
that Yang Shi proposes; and we have been using this patch to continue to
split the huge page when hole-punched or truncated, since converting over
to the compound page implementation.  Although huge tmpfs gives out huge
pages when available, if the user specifically asks to truncate or punch a
hole (perhaps to free memory, perhaps to reduce the memcg charge), then
the filesystem should do so as best it can, splitting the huge page.

That is not always possible: any additional reference to the huge page
prevents split_huge_page() from succeeding, so the result can be flaky.
But in practice it works successfully enough that we've not seen any
problem from that.

Add shmem_punch_compound() to encapsulate the decision of when a split is
needed, and doing the split if so.  Using this simplifies the flow in
shmem_undo_range(); and the first (trylock) pass does not need to do any
page clearing on failure, because the second pass will either succeed or
do that clearing.  Following the example of zero_user_segment() when
clearing a partial page, add flush_dcache_page() and set_page_dirty() when
clearing a hole - though I'm not certain that either is needed.

But: split_huge_page() would be sure to fail if shmem_undo_range()'s
pagevec holds further references to the huge page.  The easiest way to fix
that is for find_get_entries() to return early, as soon as it has put one
compound head or tail into the pagevec.  At first this felt like a hack;
but on examination, this convention better suits all its callers - or will
do, if the slight one-page-per-pagevec slowdown in shmem_unlock_mapping()
and shmem_seek_hole_data() is transformed into a 512-page-per-pagevec
speedup by checking for compound pages there.

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2002261959020.10801@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:43:41 -07:00
Huang Ying
9de4f22a60 mm: code cleanup for MADV_FREE
Some comments for MADV_FREE is revised and added to help people understand
the MADV_FREE code, especially the page flag, PG_swapbacked.  This makes
page_is_file_cache() isn't consistent with its comments.  So the function
is renamed to page_is_file_lru() to make them consistent again.  All these
are put in one patch as one logical change.

Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: David Rientjes <rientjes@google.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200317100342.2730705-1-ying.huang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:43:38 -07:00
Yang Shi
9a9b6cce63 mm: swap: use smp_mb__after_atomic() to order LRU bit set
Memory barrier is needed after setting LRU bit, but smp_mb() is too
strong.  Some architectures, i.e.  x86, imply memory barrier with atomic
operations, so replacing it with smp_mb__after_atomic() sounds better,
which is nop on strong ordered machines, and full memory barriers on
others.  With this change the vm-scalability cases would perform better on
x86, I saw total 6% improvement with this patch and previous inline fix.

The test data (lru-file-readtwice throughput) against v5.6-rc4:
	mainline	w/ inline fix	w/ both (adding this)
	150MB		154MB		159MB

Fixes: 9c4e6b1a70 ("mm, mlock, vmscan: no more skipping pagevecs")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: http://lkml.kernel.org/r/1584500541-46817-2-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 09:35:28 -07:00
Wei Yang
bde07cfc65 mm/swap.c: not necessary to export __pagevec_lru_add()
__pagevec_lru_add() is only used in mm directory now.

Remove the export symbol.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200126011436.22979-1-richardw.yang@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 09:35:27 -07:00
John Hubbard
07d8026995 mm: devmap: refactor 1-based refcounting for ZONE_DEVICE pages
An upcoming patch changes and complicates the refcounting and especially
the "put page" aspects of it.  In order to keep everything clean,
refactor the devmap page release routines:

* Rename put_devmap_managed_page() to page_is_devmap_managed(), and
  limit the functionality to "read only": return a bool, with no side
  effects.

* Add a new routine, put_devmap_managed_page(), to handle decrementing
  the refcount for ZONE_DEVICE pages.

* Change callers (just release_pages() and put_page()) to check
  page_is_devmap_managed() before calling the new
  put_devmap_managed_page() routine.  This is a performance point:
  put_page() is a hot path, so we need to avoid non- inline function calls
  where possible.

* Rename __put_devmap_managed_page() to free_devmap_managed_page(), and
  limit the functionality to unconditionally freeing a devmap page.

This is originally based on a separate patch by Ira Weiny, which applied
to an early version of the put_user_page() experiments.  Since then,
Jérôme Glisse suggested the refactoring described above.

Link: http://lkml.kernel.org/r/20200107224558.2362728-5-jhubbard@nvidia.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Suggested-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 10:30:37 -08:00
Konstantin Khlebnikov
eef1a429f2 mm/swap.c: piggyback lru_add_drain_all() calls
This is a very slow operation.  Right now POSIX_FADV_DONTNEED is the top
user because it has to freeze page references when removing it from the
cache.  invalidate_bdev() calls it for the same reason.  Both are
triggered from userspace, so it's easy to generate a storm.

mlock/mlockall no longer calls lru_add_drain_all - I've seen here
serious slowdown on older kernels.

There are some less obvious paths in memory migration/CMA/offlining
which shouldn't call frequently.

The worst case requires a non-trivial workload because
lru_add_drain_all() skips cpus where vectors are empty.  Something must
constantly generate a flow of pages for each cpu.  Also cpus must be
busy to make scheduling per-cpu works slower.  And the machine must be
big enough (64+ cpus in our case).

In our case that was a massive series of mlock calls in map-reduce while
other tasks write logs (and generates flows of new pages in per-cpu
vectors).  Mlock calls were serialized by mutex and accumulated latency
up to 10 seconds or more.

The kernel does not call lru_add_drain_all on mlock paths since 4.15,
but the same scenario could be triggered by fadvise(POSIX_FADV_DONTNEED)
or any other remaining user.

There is no reason to do the drain again if somebody else already
drained all the per-cpu vectors while we waited for the lock.

Piggyback on a drain starting and finishing while we wait for the lock:
all pages pending at the time of our entry were drained from the
vectors.

Callers like POSIX_FADV_DONTNEED retry their operations once after
draining per-cpu vectors when pages have unexpected references.

Link: http://lkml.kernel.org/r/157019456205.3142.3369423180908482020.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 06:29:19 -08:00
Fengguang Wu
a1100a7406 mm/swap.c: trivial mark_page_accessed() cleanup
This avoids duplicated PageReferenced() calls.  No behavior change.

Link: http://lkml.kernel.org/r/20191016225326.GB12497@wfg-t540p.sh.intel.com
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Liu Jingqi <jingqi.liu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 06:29:18 -08:00
Minchan Kim
9c276cc65a mm: introduce MADV_COLD
Patch series "Introduce MADV_COLD and MADV_PAGEOUT", v7.

- Background

The Android terminology used for forking a new process and starting an app
from scratch is a cold start, while resuming an existing app is a hot
start.  While we continually try to improve the performance of cold
starts, hot starts will always be significantly less power hungry as well
as faster so we are trying to make hot start more likely than cold start.

To increase hot start, Android userspace manages the order that apps
should be killed in a process called ActivityManagerService.
ActivityManagerService tracks every Android app or service that the user
could be interacting with at any time and translates that into a ranked
list for lmkd(low memory killer daemon).  They are likely to be killed by
lmkd if the system has to reclaim memory.  In that sense they are similar
to entries in any other cache.  Those apps are kept alive for
opportunistic performance improvements but those performance improvements
will vary based on the memory requirements of individual workloads.

- Problem

Naturally, cached apps were dominant consumers of memory on the system.
However, they were not significant consumers of swap even though they are
good candidate for swap.  Under investigation, swapping out only begins
once the low zone watermark is hit and kswapd wakes up, but the overall
allocation rate in the system might trip lmkd thresholds and cause a
cached process to be killed(we measured performance swapping out vs.
zapping the memory by killing a process.  Unsurprisingly, zapping is 10x
times faster even though we use zram which is much faster than real
storage) so kill from lmkd will often satisfy the high zone watermark,
resulting in very few pages actually being moved to swap.

- Approach

The approach we chose was to use a new interface to allow userspace to
proactively reclaim entire processes by leveraging platform information.
This allowed us to bypass the inaccuracy of the kernel’s LRUs for pages
that are known to be cold from userspace and to avoid races with lmkd by
reclaiming apps as soon as they entered the cached state.  Additionally,
it could provide many chances for platform to use much information to
optimize memory efficiency.

To achieve the goal, the patchset introduce two new options for madvise.
One is MADV_COLD which will deactivate activated pages and the other is
MADV_PAGEOUT which will reclaim private pages instantly.  These new
options complement MADV_DONTNEED and MADV_FREE by adding non-destructive
ways to gain some free memory space.  MADV_PAGEOUT is similar to
MADV_DONTNEED in a way that it hints the kernel that memory region is not
currently needed and should be reclaimed immediately; MADV_COLD is similar
to MADV_FREE in a way that it hints the kernel that memory region is not
currently needed and should be reclaimed when memory pressure rises.

This patch (of 5):

When a process expects no accesses to a certain memory range, it could
give a hint to kernel that the pages can be reclaimed when memory pressure
happens but data should be preserved for future use.  This could reduce
workingset eviction so it ends up increasing performance.

This patch introduces the new MADV_COLD hint to madvise(2) syscall.
MADV_COLD can be used by a process to mark a memory range as not expected
to be used in the near future.  The hint can help kernel in deciding which
pages to evict early during memory pressure.

It works for every LRU pages like MADV_[DONTNEED|FREE]. IOW, It moves

	active file page -> inactive file LRU
	active anon page -> inacdtive anon LRU

Unlike MADV_FREE, it doesn't move active anonymous pages to inactive file
LRU's head because MADV_COLD is a little bit different symantic.
MADV_FREE means it's okay to discard when the memory pressure because the
content of the page is *garbage* so freeing such pages is almost zero
overhead since we don't need to swap out and access afterward causes just
minor fault.  Thus, it would make sense to put those freeable pages in
inactive file LRU to compete other used-once pages.  It makes sense for
implmentaion point of view, too because it's not swapbacked memory any
longer until it would be re-dirtied.  Even, it could give a bonus to make
them be reclaimed on swapless system.  However, MADV_COLD doesn't mean
garbage so reclaiming them requires swap-out/in in the end so it's bigger
cost.  Since we have designed VM LRU aging based on cost-model, anonymous
cold pages would be better to position inactive anon's LRU list, not file
LRU.  Furthermore, it would help to avoid unnecessary scanning if system
doesn't have a swap device.  Let's start simpler way without adding
complexity at this moment.  However, keep in mind, too that it's a caveat
that workloads with a lot of pages cache are likely to ignore MADV_COLD on
anonymous memory because we rarely age anonymous LRU lists.

* man-page material

MADV_COLD (since Linux x.x)

Pages in the specified regions will be treated as less-recently-accessed
compared to pages in the system with similar access frequencies.  In
contrast to MADV_FREE, the contents of the region are preserved regardless
of subsequent writes to pages.

MADV_COLD cannot be applied to locked pages, Huge TLB pages, or VM_PFNMAP
pages.

[akpm@linux-foundation.org: resolve conflicts with hmm.git]
Link: http://lkml.kernel.org/r/20190726023435.214162-2-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Daniel Colascione <dancol@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tim Murray <timmurray@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25 17:51:41 -07:00
Yang Shi
7ae88534cd mm: move mem_cgroup_uncharge out of __page_cache_release()
A later patch makes THP deferred split shrinker memcg aware, but it needs
page->mem_cgroup information in THP destructor, which is called after
mem_cgroup_uncharge() now.

So move mem_cgroup_uncharge() from __page_cache_release() to compound page
destructor, which is called by both THP and other compound pages except
HugeTLB.  And call it in __put_single_page() for single order page.

Link: http://lkml.kernel.org/r/1565144277-36240-3-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Suggested-by: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:11 -07:00
Yu Zhao
e7a1aaf287 mm: replace list_move_tail() with add_page_to_lru_list_tail()
This is a cleanup patch that replaces two historical uses of
list_move_tail() with relatively recent add_page_to_lru_list_tail().

Link: http://lkml.kernel.org/r/20190716212436.7137-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:08 -07:00
Mauro Carvalho Chehab
5704324702 docs: admin-guide: move sysctl directory to it
The stuff under sysctl describes /sys interface from userspace
point of view. So, add it to the admin-guide and remove the
:orphan: from its index file.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 11:03:01 -03:00
Mauro Carvalho Chehab
53b9537509 docs: sysctl: convert to ReST
Rename the /proc/sys/ documentation files to ReST, using the
README file as a template for an index.rst, adding the other
files there via TOC markup.

Despite being written on different times with different
styles, try to make them somewhat coherent with a similar
look and feel, ensuring that they'll look nice as both
raw text file and as via the html output produced by the
Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 09:20:26 -03:00
Ira Weiny
c5d6c45e90 mm/swap: fix release_pages() when releasing devmap pages
release_pages() is an optimized version of a loop around put_page().
Unfortunately for devmap pages the logic is not entirely correct in
release_pages().  This is because device pages can be more than type
MEMORY_DEVICE_PUBLIC.  There are in fact 4 types, private, public, FS DAX,
and PCI P2PDMA.  Some of these have specific needs to "put" the page while
others do not.

This logic to handle any special needs is contained in
put_devmap_managed_page().  Therefore all devmap pages should be processed
by this function where we can contain the correct logic for a page put.

Handle all device type pages within release_pages() by calling
put_devmap_managed_page() on all devmap pages.  If
put_devmap_managed_page() returns true the page has been put and we
continue with the next page.  A false return of put_devmap_managed_page()
means the page did not require special processing and should fall to
"normal" processing.

This was found via code inspection while determining if release_pages()
and the new put_user_pages() could be interchangeable.[1]

[1] https://lkml.kernel.org/r/20190523172852.GA27175@iweiny-DESK2.sc.intel.com

Link: https://lkml.kernel.org/r/20190605214922.17684-1-ira.weiny@intel.com
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-02 11:37:47 -03:00
Thomas Gleixner
457c899653 treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Peng Fan
dae966dc8f mm/swap.c: __pagevec_lru_add_fn: typo fix
There is no function named munlock_vma_pages().  Correct it to
munlock_vma_page().

Link: http://lkml.kernel.org/r/20190402095609.27181-1-peng.fan@nxp.com
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 09:47:48 -07:00
Andrey Ryabinin
f4b7e272b5 mm: remove zone_lru_lock() function, access ->lru_lock directly
We have common pattern to access lru_lock from a page pointer:
	zone_lru_lock(page_zone(page))

Which is silly, because it unfolds to this:
	&NODE_DATA(page_to_nid(page))->node_zones[page_zonenum(page)]->zone_pgdat->lru_lock
while we can simply do
	&NODE_DATA(page_to_nid(page))->lru_lock

Remove zone_lru_lock() function, since it's only complicate things.  Use
'page_pgdat(page)->lru_lock' pattern instead.

[aryabinin@virtuozzo.com: a slightly better version of __split_huge_page()]
  Link: http://lkml.kernel.org/r/20190301121651.7741-1-aryabinin@virtuozzo.com
Link: http://lkml.kernel.org/r/20190228083329.31892-2-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:21 -08:00
Michal Hocko
6ea183d60c mm: handle lru_add_drain_all for UP properly
Since for_each_cpu(cpu, mask) added by commit 2d3854a37e
("cpumask: introduce new API, without changing anything") did not
evaluate the mask argument if NR_CPUS == 1 due to CONFIG_SMP=n,
lru_add_drain_all() is hitting WARN_ON() at __flush_work() added by
commit 4d43d395fe ("workqueue: Try to catch flush_work() without
INIT_WORK().") by unconditionally calling flush_work() [1].

Workaround this issue by using CONFIG_SMP=n specific lru_add_drain_all
implementation.  There is no real need to defer the implementation to
the workqueue as the draining is going to happen on the local cpu.  So
alias lru_add_drain_all to lru_add_drain which does all the necessary
work.

[akpm@linux-foundation.org: fix various build warnings]
[1] https://lkml.kernel.org/r/18a30387-6aa5-6123-e67c-57579ecc3f38@roeck-us.net
Link: http://lkml.kernel.org/r/20190213124334.GH4525@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Debugged-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-21 09:01:00 -08:00
Nikolay Borisov
f86196ea87 fs: don't open code lru_to_page()
Multiple filesystems open code lru_to_page().  Rectify this by moving
the macro from mm_inline (which is specific to lru stuff) to the more
generic mm.h header and start using the macro where appropriate.

No functional changes.

Link: http://lkml.kernel.org/r/20181129104810.23361-1-nborisov@suse.com
Link: https://lkml.kernel.org/r/20181129075301.29087-1-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Pankaj gupta <pagupta@redhat.com>
Acked-by: "Yan, Zheng" <zyan@redhat.com>		[ceph]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 13:13:48 -08:00
Arun KS
ca79b0c211 mm: convert totalram_pages and totalhigh_pages variables to atomic
totalram_pages and totalhigh_pages are made static inline function.

Main motivation was that managed_page_count_lock handling was complicating
things.  It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.

[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:47 -08:00
Lance Roy
35f3aa39f2 mm: Replace spin_is_locked() with lockdep
lockdep_assert_held() is better suited to checking locking requirements,
since it only checks if the current thread holds the lock regardless of
whether someone else does. This is also a step towards possibly removing
spin_is_locked().

Signed-off-by: Lance Roy <ldr709@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <linux-mm@kvack.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2018-11-12 09:06:22 -08:00
Linus Torvalds
dad4f140ed Merge branch 'xarray' of git://git.infradead.org/users/willy/linux-dax
Pull XArray conversion from Matthew Wilcox:
 "The XArray provides an improved interface to the radix tree data
  structure, providing locking as part of the API, specifying GFP flags
  at allocation time, eliminating preloading, less re-walking the tree,
  more efficient iterations and not exposing RCU-protected pointers to
  its users.

  This patch set

   1. Introduces the XArray implementation

   2. Converts the pagecache to use it

   3. Converts memremap to use it

  The page cache is the most complex and important user of the radix
  tree, so converting it was most important. Converting the memremap
  code removes the only other user of the multiorder code, which allows
  us to remove the radix tree code that supported it.

  I have 40+ followup patches to convert many other users of the radix
  tree over to the XArray, but I'd like to get this part in first. The
  other conversions haven't been in linux-next and aren't suitable for
  applying yet, but you can see them in the xarray-conv branch if you're
  interested"

* 'xarray' of git://git.infradead.org/users/willy/linux-dax: (90 commits)
  radix tree: Remove multiorder support
  radix tree test: Convert multiorder tests to XArray
  radix tree tests: Convert item_delete_rcu to XArray
  radix tree tests: Convert item_kill_tree to XArray
  radix tree tests: Move item_insert_order
  radix tree test suite: Remove multiorder benchmarking
  radix tree test suite: Remove __item_insert
  memremap: Convert to XArray
  xarray: Add range store functionality
  xarray: Move multiorder_check to in-kernel tests
  xarray: Move multiorder_shrink to kernel tests
  xarray: Move multiorder account test in-kernel
  radix tree test suite: Convert iteration test to XArray
  radix tree test suite: Convert tag_tagged_items to XArray
  radix tree: Remove radix_tree_clear_tags
  radix tree: Remove radix_tree_maybe_preload_order
  radix tree: Remove split/join code
  radix tree: Remove radix_tree_update_node_t
  page cache: Finish XArray conversion
  dax: Convert page fault handlers to XArray
  ...
2018-10-28 11:35:40 -07:00
YueHaibing
c3df29d130 mm/swap.c: remove duplicated include
Remove duplicated include linux/memremap.h

Link: http://lkml.kernel.org/r/20180917131308.16420-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:26:33 -07:00
Matthew Wilcox
10bbd23585 pagevec: Use xa_mark_t
Removes sparse warnings.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-10-21 10:46:39 -04:00
Matthew Wilcox
3159f943aa xarray: Replace exceptional entries
Introduce xarray value entries and tagged pointers to replace radix
tree exceptional entries.  This is a slight change in encoding to allow
the use of an extra bit (we can now store BITS_PER_LONG - 1 bits in a
value entry).  It is also a change in emphasis; exceptional entries are
intimidating and different.  As the comment explains, you can choose
to store values or pointers in the xarray and they are both first-class
citizens.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
2018-09-29 22:47:49 -04:00
Dan Williams
e763848843 mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS
In preparation for fixing dax-dma-vs-unmap issues, filesystems need to
be able to rely on the fact that they will get wakeups on dev_pagemap
page-idle events. Introduce MEMORY_DEVICE_FS_DAX and
generic_dax_page_free() as common indicator / infrastructure for dax
filesytems to require. With this change there are no users of the
MEMORY_DEVICE_HOST designation, so remove it.

The HMM sub-system extended dev_pagemap to arrange a callback when a
dev_pagemap managed page is freed. Since a dev_pagemap page is free /
idle when its reference count is 1 it requires an additional branch to
check the page-type at put_page() time. Given put_page() is a hot-path
we do not want to incur that check if HMM is not in use, so a static
branch is used to avoid that overhead when not necessary.

Now, the FS_DAX implementation wants to reuse this mechanism for
receiving dev_pagemap ->page_free() callbacks. Rework the HMM-specific
static-key into a generic mechanism that either HMM or FS_DAX code paths
can enable.

For ARCH=um builds, and any other arch that lacks ZONE_DEVICE support,
care must be taken to compile out the DEV_PAGEMAP_OPS infrastructure.
However, we still need to support FS_DAX in the FS_DAX_LIMITED case
implemented by the s390/dcssblk driver.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Reported-by: Dave Jiang <dave.jiang@intel.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-05-22 06:59:39 -07:00
Mike Rapoport
002843de36 mm/swap.c: remove @cold parameter description for release_pages()
The 'cold' parameter was removed from release_pages function by commit
c6f92f9fbe ("mm: remove cold parameter for release_pages").

Update the description to match the code.

Link: http://lkml.kernel.org/r/1519585191-10180-3-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05 21:36:26 -07:00
Mike Rapoport
cb6f0f3480 mm/swap.c: make functions and their kernel-doc agree (again)
There was a conflict between the commit e02a9f048e ("mm/swap.c: make
functions and their kernel-doc agree") and the commit f144c390f9 ("mm:
docs: fix parameter names mismatch") that both tried to fix mismatch
betweeen pagevec_lookup_entries() parameter names and their description.

Since nr_entries is a better name for the parameter, fix the description
again.

Link: http://lkml.kernel.org/r/1518116946-20947-1-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-21 15:35:43 -08:00
Shakeel Butt
9c4e6b1a70 mm, mlock, vmscan: no more skipping pagevecs
When a thread mlocks an address space backed either by file pages which
are currently not present in memory or swapped out anon pages (not in
swapcache), a new page is allocated and added to the local pagevec
(lru_add_pvec), I/O is triggered and the thread then sleeps on the page.
On I/O completion, the thread can wake on a different CPU, the mlock
syscall will then sets the PageMlocked() bit of the page but will not be
able to put that page in unevictable LRU as the page is on the pagevec
of a different CPU.  Even on drain, that page will go to evictable LRU
because the PageMlocked() bit is not checked on pagevec drain.

The page will eventually go to right LRU on reclaim but the LRU stats
will remain skewed for a long time.

This patch puts all the pages, even unevictable, to the pagevecs and on
the drain, the pages will be added on their LRUs correctly by checking
their evictability.  This resolves the mlocked pages on pagevec of other
CPUs issue because when those pagevecs will be drained, the mlocked file
pages will go to unevictable LRU.  Also this makes the race with munlock
easier to resolve because the pagevec drains happen in LRU lock.

However there is still one place which makes a page evictable and does
PageLRU check on that page without LRU lock and needs special attention.
TestClearPageMlocked() and isolate_lru_page() in clear_page_mlock().

	: __pagevec_lru_add_fn	: clear_page_mlock

	SetPageLRU()			if (!TestClearPageMlocked())
					  return
	smp_mb() // <--required
					// inside does PageLRU
	if (!PageMlocked())		if (isolate_lru_page())
	  move to evictable LRU		  putback_lru_page()
	else
	  move to unevictable LRU

In '', TestClearPageMlocked() provides full memory barrier semantics
and thus the PageLRU check (inside isolate_lru_page) can not be
reordered before it.

In '', without explicit memory barrier, the PageMlocked() check can be
reordered before SetPageLRU().  If that happens, '' can put a page in
unevictable LRU and '' might have just cleared the Mlocked bit of that
page but fails to isolate as PageLRU fails as '' still hasn't set
PageLRU bit of that page.  That page will be stranded on the unevictable
LRU.

There is one (good) side effect though.  Without this patch, the pages
allocated for System V shared memory segment are added to evictable LRUs
even after shmctl(SHM_LOCK) on that segment.  This patch will correctly
put such pages to unevictable LRU.

Link: http://lkml.kernel.org/r/20171121211241.18877-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shaohua Li <shli@fb.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-21 15:35:42 -08:00
Mike Rapoport
f144c390f9 mm: docs: fix parameter names mismatch
There are several places where parameter descriptions do no match the
actual code.  Fix it.

Link: http://lkml.kernel.org/r/1516700871-22279-3-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:48 -08:00
Randy Dunlap
e02a9f048e mm/swap.c: make functions and their kernel-doc agree
Fix some basic kernel-doc notation in mm/swap.c:

 - for function lru_cache_add_anon(), make its kernel-doc function name
   match its function name and change colon to hyphen following the
   function name

 - for function pagevec_lookup_entries(), change the function parameter
   name from nr_pages to nr_entries since that is more descriptive of
   what the parameter actually is and then it matches the kernel-doc
   comments also

Fix function kernel-doc to match the change in commit 67fd707f46:

 - drop the kernel-doc notation for @nr_pages from
   pagevec_lookup_range() and correct the function description for that
   change

Link: http://lkml.kernel.org/r/3b42ee3e-04a9-a6ca-6be4-f00752a114fe@infradead.org
Fixes: 67fd707f46 ("mm: remove nr_pages argument from pagevec_lookup_{,range}_tag()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31 17:18:40 -08:00
Michal Hocko
9852a72123 mm: drop hotplug lock from lru_add_drain_all()
Pulling cpu hotplug locks inside the mm core function like
lru_add_drain_all just asks for problems and the recent lockdep splat
[1] just proves this.  While the usage in that particular case might be
wrong we should avoid the locking as lru_add_drain_all() is used in many
places.  It seems that this is not all that hard to achieve actually.

We have done the same thing for drain_all_pages which is analogous by
commit a459eeb7b8 ("mm, page_alloc: do not depend on cpu hotplug locks
inside the allocator").  All we have to care about is to handle

      - the work item might be executed on a different cpu in worker from
        unbound pool so it doesn't run on pinned on the cpu

      - we have to make sure that we do not race with page_alloc_cpu_dead
        calling lru_add_drain_cpu

the first part is already handled because the worker calls lru_add_drain
which disables preemption when calling lru_add_drain_cpu on the local
cpu it is draining.  The later is true because page_alloc_cpu_dead is
called on the controlling CPU after the hotplugged CPU vanished
completely.

[1] http://lkml.kernel.org/r/089e0825eec8955c1f055c83d476@google.com

[add a cpu hotplug locking interaction as per tglx]
Link: http://lkml.kernel.org/r/20171116120535.23765-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31 17:18:36 -08:00
Mel Gorman
7f0b5fb953 mm, pagevec: rename pagevec drained field
According to Vlastimil Babka, the drained field in pagevec is
potentially misleading because it might be interpreted as draining this
pagevec instead of the percpu lru pagevecs.  Rename the field for
clarity.

Link: http://lkml.kernel.org/r/20171019093346.ylahzdpzmoriyf4v@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15 18:21:06 -08:00
Mel Gorman
2d4894b5d2 mm: remove cold parameter from free_hot_cold_page*
Most callers users of free_hot_cold_page claim the pages being released
are cache hot.  The exception is the page reclaim paths where it is
likely that enough pages will be freed in the near future that the
per-cpu lists are going to be recycled and the cache hotness information
is lost.  As no one really cares about the hotness of pages being
released to the allocator, just ditch the parameter.

The APIs are renamed to indicate that it's no longer about hot/cold
pages.  It should also be less confusing as there are subtle differences
between them.  __free_pages drops a reference and frees a page when the
refcount reaches zero.  free_hot_cold_page handled pages whose refcount
was already zero which is non-obvious from the name.  free_unref_page
should be more obvious.

No performance impact is expected as the overhead is marginal.  The
parameter is removed simply because it is a bit stupid to have a useless
parameter copied everywhere.

[mgorman@techsingularity.net: add pages to head, not tail]
  Link: http://lkml.kernel.org/r/20171019154321.qtpzaeftoyyw4iey@techsingularity.net
Link: http://lkml.kernel.org/r/20171018075952.10627-8-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15 18:21:06 -08:00