Initial KASAN shadow memory range was picked to preserve original kernel
modules area position. With protected execution support, which might
impose addressing limitation on vmalloc area and hence affect modules
area position, current fixed KASAN shadow memory range is only making
kernel memory layout setup more complex. So move it to the very end of
available virtual space and simplify calculations.
At the same time return to previous kernel address space split. In
particular commit 0c4f2623b9 ("s390: setup kernel memory layout
early") introduced precise identity map size calculation and keeping
vmemmap left most starting from a fresh region table entry. This didn't
take into account additional mapping region requirement for potential
DCSS mapping above available physical memory. So go back to virtual
space split between 1:1 mapping & vmemmap array once vmalloc area size
is subtracted.
Cc: stable@vger.kernel.org
Fixes: 0c4f2623b9 ("s390: setup kernel memory layout early")
Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Currently s390 supports a fixed maximum command line length of 896
bytes. This isn't enough as some installers are trying to pass all
configuration data via kernel command line, and even with zfcp alone
it is easy to generate really long command lines. Therefore extend
the command line to 4 kbytes.
In the parm area where the command line is stored there is no indication
of the maximum allowed length, so a new field which contains the maximum
length is added.
The parm area has always been initialized to zero, so with old kernels
this field would read zero. This is important because tools like zipl
could read this field. If it contains a number larger than zero zipl
knows the maximum length that can be stored in the parm area, otherwise
it must assume that it is booting a legacy kernel and only 896 bytes are
available.
The removing of trailing whitespace in head.S is also removed because
code to do this is already present in setup_boot_command_line().
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In preparation of adding support for command lines with variable
sizes on s390, the check whether the new kernel image is at least HEAD_END
bytes long isn't correct. Move the check to kexec_file_add_components()
so we can get the size of the parm area and check the size there.
The '.org HEAD_END' directive can now also be removed from head.S. This
was used in the past to reserve space for the early sccb buffer, but with
commit 9a5131b87cac1 ("s390/boot: move sclp early buffer from fixed address
in asm to C") this is no longer required.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With the upcoming BEAR enhancements last_break isn't really
unique, so rename it to pgm_last_break. This way it should
be more obvious that this is the last_break value that is
written by the hardware when a program check occurs.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The memory for amode31 section is allocated from the decompressed
kernel. Instead, allocate that memory from the decompressor. This
is a prerequisite to allow initialization of the virtual memory
before the decompressed kernel takes over.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Partially revert commit 4555b9f34296 ("s390/boot: move
dma sections from decompressor to decompressed kernel").
This is a prerequisite to allow initialization of virtual
memory in decompressor and avoid overwriting of ASCEs in
the decompressed kernel otherwise.
Since the control registers 2, 5 and 15 are reinitialized
in the decompressed kernel again, this change does not
prevent relocating of amode31 section in any way.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
- Improve ftrace code patching so that stop_machine is not required anymore.
This requires a small common code patch acked by Steven Rostedt:
https://lore.kernel.org/linux-s390/20210730220741.4da6fdf6@oasis.local.home/
- Enable KCSAN for s390. This comes with a small common code change to fix a
compile warning. Acked by Marco Elver:
https://lore.kernel.org/r/20210729142811.1309391-1-hca@linux.ibm.com
- Add KFENCE support for s390. This also comes with a minimal x86 patch from
Marco Elver who said also this can be carried via the s390 tree:
https://lore.kernel.org/linux-s390/YQJdarx6XSUQ1tFZ@elver.google.com/
- More changes to prepare the decompressor for relocation.
- Enable DAT also for CPU restart path.
- Final set of register asm removal patches; leaving only three locations where
needed and sane.
- Add NNPA, Vector-Packed-Decimal-Enhancement Facility 2, PCI MIO support to
hwcaps flags.
- Cleanup hwcaps implementation.
- Add new instructions to in-kernel disassembler.
- Various QDIO cleanups.
- Add SCLP debug feature.
- Various other cleanups and improvements all over the place.
-----BEGIN PGP SIGNATURE-----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=WDRh
-----END PGP SIGNATURE-----
Merge tag 's390-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Improve ftrace code patching so that stop_machine is not required
anymore. This requires a small common code patch acked by Steven
Rostedt:
https://lore.kernel.org/linux-s390/20210730220741.4da6fdf6@oasis.local.home/
- Enable KCSAN for s390. This comes with a small common code change to
fix a compile warning. Acked by Marco Elver:
https://lore.kernel.org/r/20210729142811.1309391-1-hca@linux.ibm.com
- Add KFENCE support for s390. This also comes with a minimal x86 patch
from Marco Elver who said also this can be carried via the s390 tree:
https://lore.kernel.org/linux-s390/YQJdarx6XSUQ1tFZ@elver.google.com/
- More changes to prepare the decompressor for relocation.
- Enable DAT also for CPU restart path.
- Final set of register asm removal patches; leaving only three
locations where needed and sane.
- Add NNPA, Vector-Packed-Decimal-Enhancement Facility 2, PCI MIO
support to hwcaps flags.
- Cleanup hwcaps implementation.
- Add new instructions to in-kernel disassembler.
- Various QDIO cleanups.
- Add SCLP debug feature.
- Various other cleanups and improvements all over the place.
* tag 's390-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (105 commits)
s390: remove SCHED_CORE from defconfigs
s390/smp: do not use nodat_stack for secondary CPU start
s390/smp: enable DAT before CPU restart callback is called
s390: update defconfigs
s390/ap: fix state machine hang after failure to enable irq
KVM: s390: generate kvm hypercall functions
s390/sclp: add tracing of SCLP interactions
s390/debug: add early tracing support
s390/debug: fix debug area life cycle
s390/debug: keep debug data on resize
s390/diag: make restart_part2 a local label
s390/mm,pageattr: fix walk_pte_level() early exit
s390: fix typo in linker script
s390: remove do_signal() prototype and do_notify_resume() function
s390/crypto: fix all kernel-doc warnings in vfio_ap_ops.c
s390/pci: improve DMA translation init and exit
s390/pci: simplify CLP List PCI handling
s390/pci: handle FH state mismatch only on disable
s390/pci: fix misleading rc in clp_set_pci_fn()
s390/boot: factor out offset_vmlinux_info() function
...
Move offsetting all of vmlinux_info fields to a separate
function for better readability.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Ship minimal stdarg.h (1 type, 4 macros) as <linux/stdarg.h>.
stdarg.h is the only userspace header commonly used in the kernel.
GPL 2 version of <stdarg.h> can be extracted from
http://archive.debian.org/debian/pool/main/g/gcc-4.2/gcc-4.2_4.2.4.orig.tar.gz
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, the install target in arch/s390/Makefile descends into
arch/s390/boot/Makefile to invoke the shell script, but there is no
good reason to do so.
arch/s390/Makefile can run the shell script directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210729142338.446002-1-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
zstd decompression uses __builtin_clz() which fails back to __clzdi2()
when the kernel is built for older hardware like z900. This leads to
build failures like the following:
s390x-11.1.0-ld: /devel/src/kernel/arch/s390/boot/compressed/../../../../lib/zstd/bitstream.h:148: undefined reference to `__clzdi2'
Fix that by optionally including lib/clz_ctz.c into the decompressor.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 7b034d9c1b ("s390/boot: add zstd support")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/patch-1.thread-f0f589.git-f0f58936888f.your-ad-here.call-01627564869-ext-2765@work.hours
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This change simplifies the task of making the decompressor relocatable.
The decompressor's image contains special DMA sections between _sdma and
_edma. This DMA segment is loaded at boot as part of the decompressor and
then simply handed over to the decompressed kernel. The decompressor itself
never uses it in any way. The primary reason for this is the need to keep
the aforementioned DMA segment below 2GB which is required by architecture,
and because the decompressor is always loaded at a fixed low physical
address, it is guaranteed that the DMA region will not cross the 2GB
memory limit. If the DMA region had been placed in the decompressed kernel,
then KASLR would make this guarantee impossible to fulfill or it would
be restricted to the first 2GB of memory address space.
This commit moves all DMA sections between _sdma and _edma from
the decompressor's image to the decompressed kernel's image. The complete
DMA region is placed in the init section of the decompressed kernel and
immediately relocated below 2GB at start-up before it is needed by other
parts of the decompressed kernel. The relocation of the DMA region happens
even if the decompressed kernel is already located below 2GB in order
to keep the first implementation simple. The relocation should not have
any noticeable impact on boot time because the DMA segment is only a couple
of pages.
After relocating the DMA sections, the kernel has to fix all references
which point into it. In order to automate this, place all variables
pointing into the DMA sections in a special .dma.refs section. All such
variables must be defined using the new __dma_ref macro. Only variables
containing addresses within the DMA sections must be placed in the new
.dma.refs section.
Furthermore, move the initialization of control registers from
the decompressor to the decompressed kernel because some control registers
reference tables that must be placed in the DMA data section to
guarantee that their addresses are below 2G. Because the decompressed
kernel relocates the DMA sections at startup, the content of control
registers CR2, CR5 and CR15 must be updated with new addresses after
the relocation. The decompressed kernel initializes all control registers
early at boot and then updates the content of CR2, CR5 and CR15
as soon as the DMA relocation has occurred. This practically reverts
the commit a80313ff91 ("s390/kernel: introduce .dma sections").
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
As a preparation for moving the .dma.data section from the decompressor to
the decompressed kernel, the .dma.data section must be made relocatable
by replacing absolute memory addressing with relative one. This is required
in order to be able to relocate the DMA section to a memory address <= 2G
as required by the hardware architecture. The DMA section must be
relocated in case the decompressed kernel was loaded to an address >= 2G
which can occur if KASAN is enabled. By making the whole DMA section
position-independent we avoid applying relocations to it whenever it is
moved to a different address, which becomes possible as soon as it becomes
a part of the decompressed kernel.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Both macros are used only in decompressor's head.S, unnecessary to put
them in a global header used in many places like setup.h is.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The new boot data struct shall replace global variables OLDMEM_BASE and
OLDMEM_SIZE. It is initialized in the decompressor and passed
to the decompressed kernel. In comparison to the old solution, this one
doesn't access data at fixed physical addresses which will become important
when the decompressor becomes relocatable.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The new boot data struct shall replace global variables INITRD_START and
INITRD_SIZE. It is initialized in the decompressor and passed
to the decompressed kernel. In comparison to the old solution, this one
doesn't access data at fixed physical addresses which will become important
when the decompressor becomes relocatable.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To make the decompressor relocatable, the early SCLP buffer with a fixed
address must be replaced with a relocatable C buffer of the according size
and alignment as required by SCLP.
Introduce a new function sclp_early_set_buffer() into the SCLP driver
which enables the decompressor to change the SCLP early buffer at any time.
This will be useful when the decompressor becomes fully relocatable and
might need to change the SCLP early buffer to one with an address < 2G
as required by SCLP because it was loaded at an address >= 2G.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use STARTUP_NORMAL_OFFSET and STARTUP_KDUMP_OFFSET instead of magic numbers.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
De-duplicate checks for Protected Host Virtualization in decompressor and
kernel.
Set prot_virt_host=0 in the decompressor in *any* of the following cases
and hand it over to the decompressed kernel:
* No explicit prot_virt=1 is given on the kernel command-line
* Protected Guest Virtualization is enabled
* Hardware support not present
* kdump or stand-alone dump
The decompressed kernel needs to use only is_prot_virt_host() instead of
performing again all checks done by the decompressor.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
A dump kernel is neither required nor able to support Secure Execution.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The functions adjust_to_uv_max() and uv_query_info() are used only
in the decompressor. Therefore, move the function declarations from
the global arch/s390/include/asm/uv.h to arch/s390/boot/uv.h.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
A buffer that can be used for communication with SCLP is required
to lie below 2GB memory address. Therefore, both sclp_info_sccb
and sclp_early_sccb must fulfill this requirement if passed directly
to the sclp_early_cmd() function. Instead, use only sclp_early_sccb
for communication with SCLP. This allows the buffer sclp_info_sccb
to be placed anywhere in the memory address space and, therefore,
simplifies the process of making the decompressor relocatable later on,
one thing less to relocate. And make sure that the length of the new unified
early SCLP buffer is no less than the length of the removed sclp_info_sccb
buffer which might be larger than the length of the sclp_early_sccb buffer.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
* The linux/spinlock.h header was included indirectly by the decompressor
and brought unnecessary build dependencies.
* Use proper includes in files which either directly or indirectly included
cio.h and were hidden until now by the included linux/spinlock.h, e.g.
linux/string.h for memcpy() or asm/page.h for PAGE_SIZE.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Instead of using constant addresses for the normal and dump-info stacks,
allocate both stacks in the decompressor's image and load the stack register
in a position-independent manner.
This will allow loading and entering the decompressor at an arbitrary
memory address without corrupting the content at the fixed addresses
used until now for both stacks. This is one of the prerequisites
for being able to kexec the decompressor from its load address without
relocating it first.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
To prevent multiple incompatible declarations of symbols and to catch
such mistakes at compile time.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The DMA code section of the decompressor must be compiled with expolines
if Spectre V2 mitigation has been enabled for the decompressed kernel.
This is required because although the decompressor's image contains
the DMA code section, it is handed over to the decompressed kernel for use.
Because the DMA code is already slow w/o expolines, use expolines always
regardless whether the decompressed kernel is using them or not. This
simplifies the DMA code by dropping the conditional compilation of
expolines.
Fixes: bf72630130 ("s390: use proper expoline sections for .dma code")
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The magic string "S390EP" at offset 0x10008 indicated to the decompressed
kernel that it was booted by the decompressor. Introduce a new bootdata
flag instead which conveys the same information in an explicit and
a cleaner way. But keep the magic string because it is a kernel ABI.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Turns out that the bit 61 in the TEID is not always 1 and if that's
the case the address space ID and the address are
unpredictable. Without an address and its address space ID we can't
export memory and hence we can only send a SIGSEGV to the process or
panic the kernel depending on who caused the exception.
Unfortunately bit 61 is only reliable if we have the "misc" UV feature
bit.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 084ea4d611 ("s390/mm: add (non)secure page access exceptions handlers")
Cc: stable@vger.kernel.org
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The tprot() inline asm temporarily changes the program check new psw
to redirect a potential program check on the diag instruction.
Restoring of the program check new psw is done in C code behind the
inline asm.
This can be problematic, especially if the function is inlined, since
the compiler can reorder instructions in such a way that a different
instruction, which may result in a program check, might be executed
before the program check new psw has been restored.
To avoid such a scenario move restoring into the inline asm. For
consistency reasons move also saving of the original program check new
psw into the inline asm.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The __diag260() inline asm temporarily changes the program check new
psw to redirect a potential program check on the diag instruction.
Restoring of the program check new psw is done in C code behind the
inline asm.
This can be problematic, especially if the function is inlined, since
the compiler can reorder instructions in such a way that a different
instruction, which may result in a program check, might be executed
before the program check new psw has been restored.
To avoid such a scenario move restoring into the inline asm. For
consistency reasons move also saving of the original program check new
psw into the inline asm.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The __diag308() inline asm temporarily changes the program check new
psw to redirect a potential program check on the diag instruction.
Restoring of the program check new psw is done in C code behind the
inline asm.
This can be problematic, especially if the function is inlined, since
the compiler can reorder instructions in such a way that a different
instruction, which may result in a program check, might be executed
before the program check new psw has been restored.
To avoid such a scenario move restoring into the inline asm. For
consistency reasons move also saving of the original program check new
psw into the inline asm.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Enable ztsd support in s390/boot, to enable booting with zstd
compressed kernel when configured with CONFIG_KERNEL_ZSTD=y.
BOOT_HEAP_SIZE is defined to 0x30000 in this case. Actual decompressor
memory usage with allyesconfig is currently 0x26150.
BugLink: https://bugs.launchpad.net/bugs/1931725
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
cc: Heiko Carstens <hca@linux.ibm.com>
cc: Vasily Gorbik <gor@linux.ibm.com>
cc: Christian Borntraeger <borntraeger@de.ibm.com>
cc: linux-s390@vger.kernel.org
Link: https://lore.kernel.org/r/20210615114150.325080-1-dimitri.ledkov@canonical.com
[gor: added BOOT_HEAP_SIZE for zstd]
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Currently BOOT_HEAP_SIZE is always defined as 0x400000 due to
bogus condition. Use CONFIG_KERNEL_BZIP2 instead of
CONFIG_HAVE_KERNEL_BZIP2 to correct that.
BOOT_HEAP_SIZE of 0x10000 is still good enough for every decompressor
algorithm but bzip2. Actual decompressor memory usage with allyesconfig
is the following:
gzip 0xbc28
bzip2 0x379518
xz 0x7410
lzma 0x3e6c
lzo 0
lz4 0
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Currently there are two separate places where kernel memory layout has
to be known and adjusted:
1. early kasan setup.
2. paging setup later.
Those 2 places had to be kept in sync and adjusted to reflect peculiar
technical details of one another. With additional factors which influence
kernel memory layout like ultravisor secure storage limit, complexity
of keeping two things in sync grew up even more.
Besides that if we look forward towards creating identity mapping and
enabling DAT before jumping into uncompressed kernel - that would also
require full knowledge of and control over kernel memory layout.
So, de-duplicate and move kernel memory layout setup logic into
the decompressor.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use simple sed/tr instead of perl to generate decompressor symbols
file with the same result.
Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
[gor: changed commit message]
Link: https://lore.kernel.org/r/a48c51f8-5fe4-87e7-284e-c96e2381801a@landley.net
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Access the kernel command line via parmarea instead of using the
COMMAND_LINE define.
With this the following gcc11 warning is removed:
arch/s390/boot/ipl_parm.c: In function ‘setup_boot_command_line’:
arch/s390/boot/ipl_parm.c:168:50: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Since commit 9a965ea95135 ("s390/kexec_file: Simplify parmarea
access") we have struct parmarea which describes the layout of the
kernel parameter area.
Make the kernel parameter area available as global variable parmarea
of type struct parmarea, which allows to easily access its members.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With gcc-11, there are a lot of warnings because the facility functions
are accessing lowcore through a null pointer. Fix this by moving the
facility arrays away from lowcore.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The number reported by the query is N-1 and I think people reading the
sysfs file would expect N instead. For users creating VMs there's no
actual difference because KVM's limit is currently below the UV's
limit.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: a0f60f8431 ("s390/protvirt: Add sysfs firmware interface for Ultravisor information")
Cc: stable@vger.kernel.org
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With the intoduction of hardware tag-based KASAN some kernel checks of
this kind:
ifdef CONFIG_KASAN
will be updated to:
if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
x86 and s390 use a trick to #undef CONFIG_KASAN for some of the code
that isn't linked with KASAN runtime and shouldn't have any KASAN
annotations.
Also #undef CONFIG_KASAN_GENERIC with CONFIG_KASAN.
Link: https://lkml.kernel.org/r/9d84bfaaf8fabe0fc89f913c9e420a30bd31a260.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
More and more functionality from the early boot phase gets carried over
to the decompressor. With this the complexity of the code and thus the
chance to introduce bugs increases. In order to be able to debug these
early boot bugs the distributions have to package the decompressors
vmlinux together with the other debuginfos. However for that the
distributions require the vmlinux to contain a build-id.
Per default the section containing the build-id is placed first in the
section table. So make sure to move it behind the .text section
otherwise the image would be unbootable.
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add kernel command line and last breaking event.
The kernel command line is taken from early_command_line and printed
only if kernel is not running as protected virtualization guest and
if it has been already initialized from the "COMMAND_LINE".
Linux version 5.10.0-rc3-22794-gecaa72788df0-dirty (gor@tuxmaker) #28 SMP PREEMPT Mon Nov 9 17:41:20 CET 2020
Kernel command line: audit_enable=0 audit=0 selinux=0 crashkernel=296M root=/dev/dasda1 dasd=ec5b
memblock=debug die
Kernel fault: interruption code 0005 ilc:2
PSW : 0000000180000000 0000000000012f92 (parse_boot_command_line+0x27a/0x46c)
R:0 T:0 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:0 CC:0 PM:0 RI:0 EA:3
GPRS: 0000000000000000 00ffffffffffffff 0000000000000000 000000000001a65c
000000000000bf60 0000000000000000 00000000000003c0 0000000000000000
0000000000000080 000000000002322d 000000007f29ef20 0000000000efd018
000000000311c000 0000000000010070 0000000000012f82 000000000000bea8
Call Trace:
(sp:000000000000bea8 [<000000000002016e>] 000000000002016e)
sp:000000000000bf18 [<0000000000012408>] startup_kernel+0x88/0x2fc
sp:000000000000bf60 [<00000000000100c4>] startup_normal+0xb0/0xb0
Last Breaking-Event-Address:
[<00000000000135ba>] strcmp+0x22/0x24
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Information printed by print_pgm_check_info() is crucial for
debugging decompressor problems. Printing instruction addresses is
better than nothing, but turns further debugging into tedious job of
figuring out which function those addresses correspond to.
This change adds simplistic symbols resolution support. And adds %pS
format specifier support to decompressor_printk().
Decompressor symbols list is extracted and sorted with
nm -n -S:
...
0000000000010000 0000000000000014 T startup
0000000000010014 00000000000000b0 t startup_normal
0000000000010180 00000000000000b2 t startup_kdump
...
Then functions are filtered and contracted to a form:
"10000 14 startup\0""10014 b0 startup_normal\0""10180 b2 startup_kdump\0"
...
Which makes it trivial to find beginning of an entry and names are 0
terminated, so could be used as is. Symbols are binary-searched.
To get symbols list with final addresses and then get it into the
decompressor's image the same trick as for kallsyms is used.
Decompressor's vmlinux is linked twice.
Symbols are stored in .decompressor.syms section, current size is about
2kb.
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use SYM_CODE_* annotations for asm functions, so that function lengths
are recognized correctly.
Also currently the most part of startup is marked as startup_kdump. Move
misplaced startup_kdump where it belongs.
$ nm -n -S arch/s390/boot/compressed/vmlinux
Before:
0000000000010000 T startup
0000000000010010 T startup_kdump
After:
0000000000010000 0000000000000014 T startup
0000000000010014 00000000000000b0 t startup_normal
0000000000010180 00000000000000b2 t startup_kdump
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
