No need to save it for every lseg.
[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Embed the necessary alias into the module rather than waiting for
someone to add it to /etc/modprobe.conf
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use nfs_pageio_reset_read_mds and nfs_pageio_reset_write_mds instead of
completely reinitialising the struct nfs_pageio_descriptor.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
...and ensure that we recoalese to take into account differences in
differences in block sizes when falling back to write through the MDS.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
...and ensure that we recoalese to take into account differences in
block sizes when falling back to read through the MDS.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Mark all deviceids established under an expired MDS clientid as invalid.
Stop all new i/o through DS and send through the MDS.
Don't use any new LAYOUTGETs that use the invalid deviceid. Purge all layouts
established under the expired MDS clientid.
Remove the MDS clientid deviceid and data servers reference
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ask for whole file layouts. Until support for layout segments is fully
supported in the file layout code, discard non-whole file layouts.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We need to ensure that the layouts are set up before we can decide to
coalesce requests. To do so, we want to further split up the struct
nfs_pageio_descriptor operations into an initialisation callback, a
coalescing test callback, and a 'do i/o' callback.
This patch cleans up the existing callback methods before adding the
'initialisation' callback.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Handle ipv6 remote addresses from GETDEVICEINFO
- supports netid "tcp" for ipv4 and "tcp6" for ipv6 as rfc 5665 specifies
- added ds_remotestr to avoid having to handle different AFs in every dprintk
- tested against pynfs 4.1 server, submitting ipv6 support patch to pynfs
- tested with IPv6 disabled, it compiles cleanly and relies on rpc_pton to
refuse to accept IPv6 addresses
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In current pnfs tree, all the layouts set mds_offset in their
.write_pagelist member.
mds_offset is only used by generic layer and should be handled by it.
This patch is for upstream. It is needed in this -rc series to fix a
bug in objects layout_commit.
I'll send patches for objects and blocks to be
squashed into current pnfs tree.
TODO: It looks like the read path needs the same patch.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Otherwise we end up overflowing the rpc buffer size on the receive end.
Signed-off-by: Benny Halevy <benny@tonian.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
pnfs deviceids are unique per server, per layout type.
struct nfs_client is currently used to distinguish deviceids from
different nfs servers, yet these may clash between different layout
types on the same server. Therefore, use the layout driver associated
with each deviceid at insertion time to look it up, unhash, or
delete it.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Use the pnfs_layoutdriver_type both as a qualifier for the deviceid,
distinguishing deviceid from different layout types on the server,
and for freeing the layout-driver allocated structure containing the
nfs4_deviceid_node.
[BUG in _deviceid_purge_client]
[layout_driver MUST set free_deviceid_node if using dev-cache]
[let ver < 4.1 compile]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[removed EXPORT_SYMBOL_GPL(nfs4_deviceid_purge_client)]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Move deviceid cache from the pnfs files layout driver to the
generic layer in preparation for the objects layout driver.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
deviceids are unique per server, per layout type.
Therefore, in the global cache in the files layout driver
deviceids from different servers may clash so we need
to qualify them with a struct nfs_client that represents
the nfs server that returned the deviceid.
Introduced in 2.6.39 commit ea8eecdd
"NFSv4.1 move deviceid cache to filelayout driver"
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Currently, writebacks may end up recursing back into the filesystem due to
GFP_KERNEL direct reclaims in the pnfs subsystem.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Free the slot and resend the RPC with new session <slot#,seq#>.
For nfs4_async_handle_error, return -EAGAIN and set the task->tk_status to 0
to restart the async rpc in the rpc_restart_call_prepare state which resets
the slot.
For nfs4_handle_exception, retrying a call that uses nfs4_call_sync will
reset the slot via nfs41_call_sync_prepare.
For open/close/lock/locku/delegreturn/layoutcommit/unlink/rename/write
cachethis is true, so these operations will not trigger an
NFS4ERR_RETRY_UNCACHED_REP.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
changes LAYOUTGET and GETDEVICEINFO XDR parsing to:
- not use vmap, which doesn't work on incoherent archs
- use xdr_stream parsing for all xdr
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Now that all the infrastructure is in place, we will do the
right thing if we remove this special casing.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The filelayout driver sends LAYOUTCOMMIT only when COMMIT goes to
the data server (as opposed to the MDS) and the data server WRITE
is not NFS_FILE_SYNC.
Only whole file layout support means that there is only one IOMODE_RW layout
segment.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn>
Tested-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implement all the hooks created in the previous patches.
This requires exporting quite a few functions and adding a few
structure fields.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Create a preallocated list header to hold nfs_pages for each
non-MDS COMMIT destination. Note this is not necessarily each DS,
but is basically each <DS, fh> pair.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move it up to avoid forward declaration in later patch.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Allowing stripe_unit==0 causes the client to crash later on
when dividing by zero.
Reported-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Allows the pnfs filelayout driver to write to the data servers.
Note that COMMIT to data servers will be implemented in a future
patch. To avoid improper behavior, for the moment any WRITE to a data
server that would also require a COMMIT to the data server is sent
NFS_FILE_SYNC.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If a data server is unavailable, go through MDS.
Mark the deviceid containing the data server as a negative cache entry.
Do not try to connect to any data server on a deviceid marked as a negative
cache entry. Mark any layout that tries to use the marked deviceid as failed.
Inodes with a layout marked as fails will not use the layout for I/O, and will
not perform any more layoutgets.
Inodes without a layout will still do layoutget, but the layout will get
marked immediately.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
No need for generic cache with only one user.
Keep a simple hash of deviceids in the filelayout driver.
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Acked-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use our own async error handler.
Mark the layout as failed and retry i/o through the MDS on specified errors.
Update the mds_offset in nfs_readpage_retry so that a failed short-read retry
to a DS gets correctly resent through the MDS.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Attempt a pNFS file layout read by setting up the nfs_read_data struct and
calling nfs_initiate_read with the data server rpc client and the
filelayout rpc call ops.
Error handling is implemented in a subsequent patch.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Tested-by: Guo Mingyang <guomingyang@nrchpc.ac.cn>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prepare for filelayout_read_pagelist with helper functions that find the correct
data server, filehandle, and offset.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Tigran Mkrtchyan <tigran@anahit.desy.de>
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add a pg_test layout driver hook which is used to avoid coelescing I/O across
layout stripes.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
While we are renaming all the fields, change lo->state to lo->plh_flags.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The initialize_mountpoint/uninitialise_mountpoint functions are really about
setting or clearing the layout driver to be used on this filesystem. Change
the names to the more descriptive 'set_layoutdriver/clear_layoutdriver'.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implement the driver's io_ops->alloc_lseg and free_lseg functions,
which integrate into the deviceid cache and calls out to
nfs4_proc_getdeviceinfo when necessary.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This driver just registers itself and supplies trivial mount/umount functions.
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
