Now that we wait for DRM panels to be available before registering the
DRM device (returning -EPROBE_DEFER if the panel has not been probed
yet), we no longer need to put the fbdev creation code in
->output_poll_changed().
This removes the 10 secs delay between DRM dev registration and fbdev
creation (polling period = 10 seconds).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Alex Vazquez <avazquez.dev@gmail.com>
ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
First set of i915 fixes for code in next.
* tag 'drm-intel-next-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: skip the first 4k of stolen memory on everything >= gen8
drm/i915: Fallback to single PAGE_SIZE segments for DMA remapping
drm/i915: Fix use after free in logical_render_ring_init
drm/i915: disable PSR by default on HSW/BDW
drm/i915: Fix setting of boost freq tunable
drm/i915: tune down the fast link training vs boot fail
drm/i915: Reorder phys backing storage release
drm/i915/gen9: Fix PCODE polling during SAGV disabling
drm/i915/gen9: Fix PCODE polling during CDCLK change notification
drm/i915/dsi: Fix chv_exec_gpio disabling the GPIOs it is setting
drm/i915/dsi: Fix swapping of MIPI_SEQ_DEASSERT_RESET / MIPI_SEQ_ASSERT_RESET
drm/i915/dsi: Do not clear DPOUNIT_CLOCK_GATE_DISABLE from vlv_init_display_clock_gating
drm/i915: drop the struct_mutex when wedged or trying to reset
Here's the one lonely bugfix I talked about on irc.
* tag 'drm-misc-fixes-2016-12-22' of git://anongit.freedesktop.org/git/drm-misc:
drivers/gpu/drm/ast: Fix infinite loop if read fails
- fix display regression on DCE6/8
- Powergating fixes for GFX8
- amdgpu SI fixes (golden settings, proper rev id setup, etc.)
* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (21 commits)
drm/amdgpu: update tile table for oland/hainan
drm/amdgpu: update tile table for verde
drm/amdgpu: update rev id for verde
drm/amdgpu: update golden setting for verde
drm/amdgpu: update rev id for oland
drm/amdgpu: update golden setting for oland
drm/amdgpu: update rev id for hainan
drm/amdgpu: update golden setting for hainan
drm/amdgpu: update rev id for pitcairn
drm/amdgpu: update golden setting for pitcairn
drm/amdgpu: update golden setting/tiling table of tahiti
drm/amdgpu: fix cursor setting of dce6/dce8
drm/amdgpu: refine set clock gating for tonga/polaris
drm/amdgpu: initialize cg flags for tonga/polaris10/polaris11.
drm/amdgpu: add new gfx cg flags.
drm/amdgpu: fix pg can't be disabled by PG mask.
drm/amdgpu: always initialize gfx pg for gfx_v8.0.
drm/amdgpu: enable AMD_PG_SUPPORT_CP in Carrizo/Stoney.
drm/amdgpu: fix init save/restore list in gfx_v8.0
drm/amdgpu: fix enable_cp_power_gating in gfx_v8.0.
...
- Move some Linux-specific functionality to upstream ACPICA and
update the in-kernel users of it accordingly (Lv Zheng).
- Drop a useless warning (triggered by the lack of an optional
object) from the ACPI namespace scanning code (Zhang Rui).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=55TG
-----END PGP SIGNATURE-----
Merge tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"Here are new versions of two ACPICA changes that were deferred
previously due to a problem they had introduced, two cleanups on top
of them and the removal of a useless warning message from the ACPI
core.
Specifics:
- Move some Linux-specific functionality to upstream ACPICA and
update the in-kernel users of it accordingly (Lv Zheng)
- Drop a useless warning (triggered by the lack of an optional
object) from the ACPI namespace scanning code (Zhang Rui)"
* tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory()
ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users
ACPICA: Tables: Allow FADT to be customized with virtual address
ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel
ACPI: do not warn if _BQC does not exist
* acpica:
ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory()
ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users
ACPICA: Tables: Allow FADT to be customized with virtual address
ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel
* acpi-scan:
ACPI: do not warn if _BQC does not exist
This patch removes the users of the deprectated APIs:
acpi_get_table_with_size()
early_acpi_os_unmap_memory()
The following APIs should be used instead of:
acpi_get_table()
acpi_put_table()
The deprecated APIs are invented to be a replacement of acpi_get_table()
during the early stage so that the early mapped pointer will not be stored
in ACPICA core and thus the late stage acpi_get_table() won't return a
wrong pointer. The mapping size is returned just because it is required by
early_acpi_os_unmap_memory() to unmap the pointer during early stage.
But as the mapping size equals to the acpi_table_header.length
(see acpi_tb_init_table_descriptor() and acpi_tb_validate_table()), when
such a convenient result is returned, driver code will start to use it
instead of accessing acpi_table_header to obtain the length.
Thus this patch cleans up the drivers by replacing returned table size with
acpi_table_header.length, and should be a no-op.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
BSpec got updated and this workaround is now listed as standard
required programming for all subsequent projects. This is confirmed to
fix Skylake screen flickering issues (probably caused by the fact that
we initialized a ring in the first page of stolen, but I didn't 100%
confirm this theory).
v2: this is the patch that fixes the screen flickering, document it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605
Cc: stable@vger.kernel.org
Tested-by: Dominik Klementowski <dominik232@gmail.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481727338-9901-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit d435376104)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If we at first do not succeed with attempting to remap our physical
pages using a coalesced scattergather list, try again with one
scattergather entry per page. This should help with swiotlb as it uses a
limited buffer size and only searches for contiguous chunks within its
buffer aligned up to the next boundary - i.e. we may prematurely cause a
failure as we are unable to utilize the unused space between large
chunks and trigger an error such as:
i915 0000:00:02.0: swiotlb buffer is full (sz: 1630208 bytes)
Reported-by: Juergen Gross <jgross@suse.com>
Tested-by: Juergen Gross <jgross@suse.com>
Fixes: 871dfbd67d ("drm/i915: Allow compaction upto SWIOTLB max segment size")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161219124346.550-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit d766ef5300)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 3b3f1650b1 ("drm/i915: Allocate intel_engine_cs
structure only for the enabled engines") introduced the
dynanically allocated engine instances and created an
potential use after free scenario in logical_render_ring_init
where lrc_destroy_wa_ctx_obj could be called after the engine
instance has been freed.
This can only happen during engine setup/init error handling
which luckily does not happen ever in practice.
Fix is to not call lrc_destroy_wa_ctx_obj since it would have
already been executed from the preceding engine cleanup.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 3b3f1650b1 ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1481894322-2145-1-git-send-email-tvrtko.ursulin@linux.intel.com
(cherry picked from commit d038fc7e4f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
For limiting the max frequency of gpu, the max freq tunable
is not enough to hard limit the max gap. We now have also per
client boost max freq. When this tunable was introduced,
it was mistakenly made read only. Allow user to gain control by
setting it writable.
Fixes: 29ecd78d3b ("drm/i915: Define a separate variable and control for RPS waitboost frequency")
Cc: <stable@vger.kernel.org> # v4.9+
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481718380-9170-1-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 73a7987113)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In commit a4f5ea64f0 ("drm/i915: Refactor object page API"), I
reordered the object->pages teardown to be more friendly wrt to a
separate obj->mm.lock. However, I overlooked the phys object and left it
with a dangling use-after-free of its phys_handle. Move the allocation
of the phys handle to get_pages and it release to put_pages to prevent
the invalid access and to improve symmetry.
v2: Add commentary about always aligning to page size.
Testcase: igt/drv_selftest/objects
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: a4f5ea64f0 ("drm/i915: Refactor object page API")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207133411.8028-1-chris@chris-wilson.co.uk
(cherry picked from commit dbb4351bab)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to the previous patch, it's possible atm that we call
intel_do_sagv_disable() only once during the 1ms period and time out if
that call fails. As opposed to this the spec says that we need to keep
retrying this request for a 1ms duration, so let's do this similarly to
the CDCLK change notification request.
v4-5:
- Rebased on the reply_mask, reply change.
v6:
- Remove w/s change. (Lyude)
- Rebased on the timeout_base argument change.
Cc: Lyude <cpaul@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 656d1b89e5 ("drm/i915/skl: Add support for the SAGV, fix underrun hangs")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude <lyude@redhat.com> (v4)
Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-2-git-send-email-imre.deak@intel.com
(cherry picked from commit b3b8e99984)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
commit 848496e590
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Jul 13 16:32:03 2016 +0300
drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
increased the timeout to match the spec, but we still see a timeout on
at least one SKL. A CDCLK change request following the failed one will
succeed nevertheless.
I could reproduce this problem easily by running kms_pipe_crc_basic in a
loop. In all failure cases _wait_for() was pre-empted for >3ms and so in
the worst case - when the pre-emption happened right after calculating
timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only
once which failed and so _wait_for() timed out. As opposed to this the
spec says to keep retrying the request for at most a 3ms period.
To fix this send the first request explicitly to guarantee that there is
3ms between the first and last request. Though this matches the spec, I
noticed that in rare cases this can still time out if we sent only a few
requests (in the worst case 2) _and_ PCODE is busy for some reason even
after a previous request and a 3ms delay. To work around this retry the
polling with pre-emption disabled to maximize the number of requests.
Also increase the timeout to 10ms to account for interrupts that could
reduce the number of requests. With this change I couldn't trigger
the problem.
v2:
- Use 1ms poll period instead of 10us. (Chris)
v3:
- Poll with pre-emption disabled to increase the number of request
attempts. (Ville, Chris)
- Factor out a helper to poll, it's also needed by the next patch.
v4:
- Pass reply_mask, reply to skl_pcode_request(), instead of assuming the
reply is generic. (Ville)
v5:
- List the request specific timeout values as code comment. (Ville)
v6:
- Try the poll first with preemption enabled.
- Add code comment about first request being queued by PCODE. (Art)
- Add timeout_base_ms argument. (Ville)
v7:
- Clarify code comment about first queued request. (Chris)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Art Runyan <arthur.j.runyan@intel.com>
Cc: <stable@vger.kernel.org> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms
Cc: <stable@vger.kernel.org> # v4.2-
Fixes: 5d96d8afcf ("drm/i915/skl: Deinit/init the display at suspend/resume")
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929
Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com
(cherry picked from commit a0b8a1fe34)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Set the CHV_GPIO_GPIOEN bit when updating GPIOs from chv_exec_gpio.
Fixes: a0a6d4ffd2 ("drm/i915/dsi: add support for gpio elements on CHV")
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201202925.12220-3-hdegoede@redhat.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit b2b45fcd92)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Looking at the ADF code from the Android kernel sources for a
cherrytrail tablet I noticed that it is calling the
MIPI_SEQ_ASSERT_RESET sequence from the panel prepare hook.
Until commit b1cb1bd291 ("drm/i915/dsi: update reset and power sequences
in panel prepare/unprepare hooks") the mainline i915 code was doing the
same. That commits effectively swaps the calling of MIPI_SEQ_ASSERT_RESET /
MIPI_SEQ_DEASSERT_RESET.
Looking at the naming of the sequences that is the right thing to do,
but the problem is, that the old mainline code and the ADF code was
actually calling the right sequence (tested on a cube iwork8 air tablet),
and the swapping of the calling breaks things.
This breakage was likely not noticed in testing because on cherrytrail,
currently chv_exec_gpio ends up disabling the gpio pins rather then
setting them (this is fixed in the next patch in this patch-set).
This commit fixes the swapping by fixing MIPI_SEQ_ASSERT/DEASSERT_RESET's
places in the enum defining them, so that their (new) names match their
actual use.
Changes in v2:
-Add a comment to the enum explaining that the assert/reassert names
are swapped in the spec
Fixes: b1cb1bd291 ("drm/i915/dsi: update reset and power sequences...")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161202150128.29871-1-hdegoede@redhat.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 2b8208ac93)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On my Cherrytrail CUBE iwork8 Air tablet PIPE-A would get stuck on loading
i915 at boot 1 out of every 3 boots, resulting in a non functional LCD.
Once the i915 driver has successfully loaded, the panel can be disabled /
enabled without hitting this issue.
The getting stuck is caused by vlv_init_display_clock_gating() clearing
the DPOUNIT_CLOCK_GATE_DISABLE bit in DSPCLK_GATE_D when called from
chv_pipe_power_well_ops.enable() on driver load, while a pipe is enabled
driving the DSI LCD by the BIOS.
Clearing this bit while DSI is in use is a known issue and
intel_dsi_pre_enable() / intel_dsi_post_disable() already set / clear it
as appropriate.
This commit modifies vlv_init_display_clock_gating() to leave the
DPOUNIT_CLOCK_GATE_DISABLE bit alone fixing the pipe getting stuck.
Changes in v2:
-Replace PIPE-A with "a pipe" or "the pipe" in the commit msg and
comment
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97330
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161202142904.25613-1-hdegoede@redhat.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 721d484563)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We grab the struct_mutex in intel_crtc_page_flip, but if we are wedged
or a reset is in progress we bail early but never seem to actually
release the lock.
Fixes: 7f1847ebf4 ("drm/i915: Simplify checking of GPU reset_counter in display pageflips")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161128103648.9235-1-matthew.auld@intel.com
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.7+
(cherry picked from commit ddbb271aea)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit e411072d57)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Fixes: 7c83d7abc9 ("drm/amdgpu: Only update the CUR_SIZE register when
necessary")
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ast_get_dram_info() configures a window in order to access BMC memory.
A BMC register can be configured to disallow this, and if so, causes
an infinite loop in the ast driver which renders the system unusable.
Fix this by erroring out if an error is detected. On powerpc systems with
EEH, this leads to the device being fenced and the system continuing to
operate.
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215051241.20815-1-ruscur@russell.cc
Pull i915/gvt KVMGT updates from Zhenyu Wang:
"KVMGT support depending on the VFIO/mdev framework"
* tag 'kvmgt-vfio-mdev-for-v4.10-rc1' of git://github.com/01org/gvt-linux:
drm/i915/gvt/kvmgt: add vfio/mdev support to KVMGT
drm/i915/gvt/kvmgt: read/write GPA via KVM API
drm/i915/gvt/kvmgt: replace kmalloc() by kzalloc()
Pull vfs updates from Al Viro:
- more ->d_init() stuff (work.dcache)
- pathname resolution cleanups (work.namei)
- a few missing iov_iter primitives - copy_from_iter_full() and
friends. Either copy the full requested amount, advance the iterator
and return true, or fail, return false and do _not_ advance the
iterator. Quite a few open-coded callers converted (and became more
readable and harder to fuck up that way) (work.iov_iter)
- several assorted patches, the big one being logfs removal
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
logfs: remove from tree
vfs: fix put_compat_statfs64() does not handle errors
namei: fold should_follow_link() with the step into not-followed link
namei: pass both WALK_GET and WALK_MORE to should_follow_link()
namei: invert WALK_PUT logics
namei: shift interpretation of LOOKUP_FOLLOW inside should_follow_link()
namei: saner calling conventions for mountpoint_last()
namei.c: get rid of user_path_parent()
switch getfrag callbacks to ..._full() primitives
make skb_add_data,{_nocache}() and skb_copy_to_page_nocache() advance only on success
[iov_iter] new primitives - copy_from_iter_full() and friends
don't open-code file_inode()
ceph: switch to use of ->d_init()
ceph: unify dentry_operations instances
lustre: switch to use of ->d_init()
KVMGT leverages vfio/mdev to mediate device accesses from guest,
this patch adds the vfio/mdev support, thereby completes the
functionality. An intel_vgpu is presented as a mdev device,
and full userspace API compatibility with vfio-pci is kept.
An intel_vgpu_ops is provided to mdev framework, methods get
called to create/remove a vgpu, to open/close it, and to
access it.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Previously to read/write a GPA, we at first try to pin the GFN it belongs
to, then translate the pinned PFN to a kernel HVA, then read/write it.
This is however not necessary. A GFN should be pinned IFF it would be
accessed by peripheral devices (DMA), not by CPU. This patch changes
the read/write method to KVM API, which will leverage userspace HVA
and copy_{from|to}_usr instead.
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
v2: always init gfx pg for asics that can support.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set valid data to mmRLC_SRM_INDEX_CNTL_ADDRx/DATAx.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
the CP_PG_DISABLE bit was reversed.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
it does not work with GPU pass through if the VM
is not cleanly shutdown leading to a hang when the
modules is reloaded.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
virtio_gpu_queue_ctrl_buffer_locked is called with ctrlq.qlock taken, it
releases and acquires this lock. This causes a sparse warning. Add
appropriate annotations for sparse context checking.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When virtio_gpu_free_vbufs exits due to list empty, it does not
drop the free_vbufs lock that it took.
list empty is not expected to happen anyway, but it can't hurt to fix
this and drop the lock.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
