Currently, DAMON sysfs interface doesn't provide a way for adjusting DAMON
input parameters while it is turned on. Therefore, users who want to
reconfigure DAMON need to stop DAMON and restart. This means all the
monitoring results that accumulated so far, which could be useful, should
be flushed. This would be inefficient for many cases.
For an example, let's suppose a sysadmin was running a DAMON-based
Operation Scheme to find memory regions not accessed for more than 5 mins
and page out the regions. If it turns out the 5 mins threshold was too
long and therefore the sysadmin wants to reduce it to 4 mins, the sysadmin
should turn off DAMON, restart it, and wait for at least 4 more minutes so
that DAMON can find the cold memory regions, even though DAMON was knowing
there are regions that not accessed for 4 mins at the time of shutdown.
This commit makes DAMON sysfs interface to support online DAMON input
parameters updates by adding a new input keyword for the 'state' DAMON
sysfs file, 'commit'. Writing the keyword to the 'state' file while the
corresponding kdamond is running makes the kdamond to read the sysfs file
values again and update the DAMON context.
Link: https://lkml.kernel.org/r/20220429160606.127307-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Only '->kdamond' and '->kdamond_stop' are protected by 'kdamond_lock' of
'struct damon_ctx'. All other DAMON context internal data items are
recommended to be accessed in DAMON callbacks, or under some additional
synchronizations. But, DAMON sysfs is accessing the schemes stat under
'kdamond_lock'.
It makes no big issue as the read values are not used anywhere inside
kernel, but would better to be fixed. This commit moves the reads to
DAMON callback context, as supposed to be used for the purpose.
Link: https://lkml.kernel.org/r/20220429160606.127307-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs 'state' file handling code is using string literals in both
'state_show()' and 'state_store()'. This makes the code error prone and
inflexible for future extensions.
To improve the situation, this commit defines possible input strings and
'enum' for identifying each input keyword only once, and refactors the
code to reuse those.
Link: https://lkml.kernel.org/r/20220429160606.127307-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'damon_set_regions()' is general enough so that it can also be used for
only creating regions. This commit makes DAMON sysfs interface to reuse
the function rather keeping two implementations for a same purpose.
Link: https://lkml.kernel.org/r/20220429160606.127307-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit separates DAMON sysfs interface's monitoring context targets
setup code to a new function for better readability.
Link: https://lkml.kernel.org/r/20220429160606.127307-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Having multiple targets for physical address space monitoring makes no
sense. This commit prohibits such a ridiculous DAMON context setup my
making the DAMON context build function to check and return an error for
the case.
Link: https://lkml.kernel.org/r/20220429160606.127307-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'damon_va_apply_three_regions()' is just a wrapper of its general version,
'damon_set_regions()'. This commit replaces the wrapper calls to directly
call the general version.
Link: https://lkml.kernel.org/r/20220429160606.127307-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit moves 'damon_set_regions()' from vaddr to core, as it is aimed
to be used by not only 'vaddr' but also other parts of DAMON.
Link: https://lkml.kernel.org/r/20220429160606.127307-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'damon_va_apply_three_regions()' is for adjusting address ranges to fit in
three discontiguous ranges. The function can be generalized for arbitrary
number of discontiguous ranges and reused for future usage, such as
arbitrary online regions update. For such future usage, this commit
introduces a generalized version of the function called
'damon_set_regions()'.
Link: https://lkml.kernel.org/r/20220429160606.127307-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When 'after_sampling()' or 'after_aggregation()' DAMON callbacks return an
error, kdamond continues the remaining loop once. It makes no much sense
to run the remaining part while something wrong already happened. The
context might be corrupted or having invalid data. This commit therefore
makes kdamond skips the remaining works and immediately finish in the
cases.
Link: https://lkml.kernel.org/r/20220429160606.127307-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: Support online tuning".
Effects of DAMON and DAMON-based Operation Schemes highly depends on the
configurations. Wrong configurations could even result in unexpected
efficiency degradations. For finding a best configuration, repeating
incremental configuration changes and results measurements, in other
words, online tuning, could be helpful.
Nevertheless, DAMON kernel API supports only restrictive online tuning.
Worse yet, the sysfs-based DAMON user interface doesn't support online
tuning at all. DAMON_RECLAIM also doesn't support online tuning.
This patchset makes the DAMON kernel API, DAMON sysfs interface, and
DAMON_RECLAIM supports online tuning.
Sequence of patches
-------------------
First two patches enhance DAMON online tuning for kernel API users.
Specifically, patch 1 let kernel API users to be able to do DAMON online
tuning without a restriction, and patch 2 makes error handling easier.
Following seven patches (patches 3-9) refactor code for better readability
and easier reuse of code fragments that will be useful for online tuning
support.
Patch 10 introduces DAMON callback based user request handling structure
for DAMON sysfs interface, and patch 11 enables DAMON online tuning via
DAMON sysfs interface. Documentation patch (patch 12) for usage of it
follows.
Patch 13 enables online tuning of DAMON_RECLAIM and finally patch 14
documents the DAMON_RECLAIM online tuning usage.
This patch (of 14):
For updating input parameters for running DAMON contexts, DAMON kernel API
users can use the contexts' callbacks, as it is the safe place for context
internal data accesses. When the context has DAMON-based operation
schemes and all schemes are deactivated due to their watermarks, however,
DAMON does nothing but only watermarks checks. As a result, no callbacks
will be called back, and therefore the kernel API users cannot update the
input parameters including monitoring attributes, DAMON-based operation
schemes, and watermarks.
To let users easily update such DAMON input parameters in such a case,
this commit adds a new callback, 'after_wmarks_check()'. It will be
called after each watermarks check. Users can do the online input
parameters update in the callback even under the schemes deactivated case.
Link: https://lkml.kernel.org/r/20220429160606.127307-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a regression test that validates that mremap fails for vma's that
don't exist.
Link: https://lkml.kernel.org/r/20220427224439.23828-3-dossche.niels@gmail.com
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A pmd migration entry should first be a swap pmd,so use is_swap_pmd(pmd)
instead of !pmd_present(pmd).
On the other hand, some architecture (MIPS for example) may misjudge a
pmd_none entry as a pmd migration entry.
Link: https://lkml.kernel.org/r/1651131333-6386-1-git-send-email-zhanghongchen@loongson.cn
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit c1e8d7c6a7 ("mmap locking API: convert mmap_sem comments") missed
replacing some references of mmap_sem by mmap_lock due to misspelling
(mm_sem instead of mmap_sem).
Link: https://lkml.kernel.org/r/20220503113333.214124-1-mail@florommel.de
Signed-off-by: Florian Rommel <mail@florommel.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When CONFIG_KASAN_HW_TAGS is enabled we currently increase the minimum
slab alignment to 16. This happens even if MTE is not supported in
hardware or disabled via kasan=off, which creates an unnecessary memory
overhead in those cases. Eliminate this overhead by making the minimum
slab alignment a runtime property and only aligning to 16 if KASAN is
enabled at runtime.
On a DragonBoard 845c (non-MTE hardware) with a kernel built with
CONFIG_KASAN_HW_TAGS, waiting for quiescence after a full Android boot I
see the following Slab measurements in /proc/meminfo (median of 3
reboots):
Before: 169020 kB
After: 167304 kB
[akpm@linux-foundation.org: make slab alignment type `unsigned int' to avoid casting]
Link: https://linux-review.googlesource.com/id/I752e725179b43b144153f4b6f584ceb646473ead
Link: https://lkml.kernel.org/r/20220427195820.1716975-2-pcc@google.com
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
An inclusion of cache.h in printk.h was added in 2014 in commit
c28aa1f0a8 ("printk/cache: mark printk_once test variable
__read_mostly") in order to bring in the definition of __read_mostly. The
usage of __read_mostly was later removed in commit 3ec25826ae ("printk:
Tie printk_once / printk_deferred_once into .data.once for reset") which
made the inclusion of cache.h unnecessary, so remove it.
We have a small amount of code that depended on the inclusion of cache.h
from printk.h; fix that code to include the appropriate header.
This fixes a circular inclusion on arm64 (linux/printk.h -> linux/cache.h
-> asm/cache.h -> linux/kasan-enabled.h -> linux/static_key.h ->
linux/jump_label.h -> linux/bug.h -> asm/bug.h -> linux/printk.h) that
would otherwise be introduced by the next patch.
Build tested using {allyesconfig,defconfig} x {arm64,x86_64}.
Link: https://linux-review.googlesource.com/id/I8fd51f72c9ef1f2d6afd3b2cbc875aa4792c1fba
Link: https://lkml.kernel.org/r/20220427195820.1716975-1-pcc@google.com
Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now we will use flush_cache_page() to flush cache for anonymous hugetlb
pages when unmapping or migrating a hugetlb page mapping, but the
flush_cache_page() only handles a PAGE_SIZE range on some architectures
(like arm32, arc and so on), which will cause potential cache issues.
Thus change to use flush_cache_range() to cover the whole size of a
hugetlb page.
Link: https://lkml.kernel.org/r/dc903b378d1e2d26bbbe85409ab9d009631f175c.1651056365.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The cache level flush will always be first when changing an existing
virtual–>physical mapping to a new value, since this allows us to
properly handle systems whose caches are strict and require a
virtual–>physical translation to exist for a virtual address. So we
should move the cache flushing before huge_pmd_unshare().
As Muchun pointed out[1], now the architectures whose supporting hugetlb
PMD sharing have no cache flush issues in practice. But I think we should
still follow the cache/TLB flushing rules when changing a valid virtual
address mapping in case of potential issues in future.
[1] https://lore.kernel.org/all/YmT%2F%2FhuUbFX+KHcy@FVFYT0MHHV2J.usts.net/
Link: https://lkml.kernel.org/r/4f7ae6dfdc838ab71e1655188b657c032ff1f28f.1651056365.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patchset fixes some cache flushing issues if PMD sharing is possible
for hugetlb pages, which were found by code inspection. Meanwhile Mike
found the flush_cache_page() can not cover the whole size of a hugetlb
page on some architectures [1], so I added a new patch 3 to fix this
issue, since I found only try_to_unmap_one() and try_to_migrate_one() need
to fix after some investigation.
[1] https://lore.kernel.org/linux-mm/064da3bb-5b4b-7332-a722-c5a541128705@oracle.com/
This patch (of 3):
When moving hugetlb page tables, the cache flushing is called in
move_page_tables() without considering the shared PMDs, which may be cause
cache issues on some architectures.
Thus we should move the hugetlb cache flushing into
move_hugetlb_page_tables() with considering the shared PMDs ranges,
calculated by adjust_range_if_pmd_sharing_possible(). Meanwhile also
expanding the TLBs flushing range in case of shared PMDs.
Note this is discovered via code inspection, and did not meet a real
problem in practice so far.
Link: https://lkml.kernel.org/r/cover.1651056365.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/0443c8cf20db554d3ff4b439b30e0ff26c0181dd.1651056365.git.baolin.wang@linux.alibaba.com
Fixes: 550a7d60bd ("mm, hugepages: add mremap() support for hugepage backed vma")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pgprot.pgprot is non-portable code. It should be replaced by portable
macro pgprot_val.
Link: https://lkml.kernel.org/r/20220426071302.220646-1-liusongtang@huawei.com
Signed-off-by: liusongtang <liusongtang@huawei.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit documents the user space support of the newly added monitoring
operations set for fixed virtual address ranges monitoring, namely
'fvaddr', on the ABI and usage documents for DAMON.
Link: https://lkml.kernel.org/r/20220426231750.48822-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit makes DAMON sysfs interface to support the fixed virtual
address ranges monitoring. After this commit, writing 'fvaddr' to the
'operations' DAMON sysfs file makes DAMON uses the monitoring operations
set for fixed virtual address ranges, so that users can monitor accesses
to only interested virtual address ranges.
[sj@kernel.org: fix pid leak under fvaddr ops use case]
Link: https://lkml.kernel.org/r/20220503220531.45913-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220426231750.48822-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "support fixed virtual address ranges monitoring".
The monitoring operations set for virtual address spaces automatically
updates the monitoring target regions to cover entire mappings of the
virtual address spaces as much as possible. Some users could have more
information about their programs than kernel and therefore have interest
in not entire regions but only specific regions. For such cases, the
automatic monitoring target regions updates are only unnecessary overhead
or distractions.
This patchset adds supports for the use case on DAMON's kernel API
(DAMON_OPS_FVADDR) and sysfs interface ('fvaddr' keyword for 'operations'
sysfs file).
This patch (of 3):
The monitoring operations set for virtual address spaces automatically
updates the monitoring target regions to cover entire mappings of the
virtual address spaces as much as possible. Some users could have more
information about their programs than kernel and therefore have interest
in not entire regions but only specific regions. For such cases, the
automatic monitoring target regions updates are only unnecessary overheads
or distractions.
For such cases, DAMON's API users can simply set the '->init()' and
'->update()' of the DAMON context's '->ops' NULL, and set the target
monitoring regions when creating the context. But, that would be a dirty
hack. Worse yet, the hack is unavailable for DAMON user space interface
users.
To support the use case in a clean way that can easily exported to the
user space, this commit adds another monitoring operations set called
'fvaddr', which is same to 'vaddr' but does not automatically update the
monitoring regions. Instead, it will only respect the virtual address
regions which have explicitly passed at the initial context creation.
Note that this commit leave sysfs interface not supporting the feature
yet. The support will be made in a following commit.
Link: https://lkml.kernel.org/r/20220426231750.48822-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220426231750.48822-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit updates the DAMON ABI and usage documents for the new sysfs
file, 'avail_operations'.
Link: https://lkml.kernel.org/r/20220426203843.45238-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit adds a selftest test case for ensuring the existence and the
permission (read-only) of the 'avail_oprations' DAMON sysfs file.
Link: https://lkml.kernel.org/r/20220426203843.45238-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON programming interface users can know if specific monitoring ops set
is registered or not using 'damon_is_registered_ops()', but there is no
such method for the user space. To help the case, this commit adds a new
DAMON sysfs file called 'avail_operations' under each context directory
for listing available monitoring ops. Reading the file will list each
registered monitoring ops on each line.
Link: https://lkml.kernel.org/r/20220426203843.45238-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: allow users know which monitoring ops are available".
DAMON users can configure it for vaious address spaces including virtual
address spaces and the physical address space by setting its monitoring
operations set with appropriate one for their purpose. However, there is
no celan and simple way to know exactly which monitoring operations sets
are available on the currently running kernel.
This patchset adds functions for the purpose on DAMON's kernel API
('damon_is_registered_ops()') and sysfs interface ('avail_operations' file
under each context directory).
This patch (of 4):
To know if a specific 'damon_operations' is registered, users need to
check the kernel config or try 'damon_select_ops()' with the ops of the
question, and then see if it successes. In the latter case, the user
should also revert the change. To make the process simple and convenient,
this commit adds a function for checking if a specific 'damon_operations'
is registered or not.
Link: https://lkml.kernel.org/r/20220426203843.45238-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220426203843.45238-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add VM_BUG_ON() bounds checking to make sure that, if "offset + len>
PAGE_SIZE", memset() does not corrupt data in adjacent pages.
Mainly to match all the similar functions in highmem.h.
Link: https://lkml.kernel.org/r/20220426193020.8710-1-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Out-of-bounds accesses that aren't caught by a guard page will result in
corruption of canary memory. In pathological cases, where an object has
certain alignment requirements, an out-of-bounds access might never be
caught by the guard page. Such corruptions, however, are only detected on
kfree() normally. If the bug causes the kernel to panic before kfree(),
KFENCE has no opportunity to report the issue. Such corruptions may also
indicate failing memory or other faults.
To provide some more information in such cases, add the option to check
canary bytes on panic. This might help narrow the search for the panic
cause; but, due to only having the allocation stack trace, such reports
are difficult to use to diagnose an issue alone. In most cases, such
reports are inactionable, and is therefore an opt-in feature (disabled by
default).
[akpm@linux-foundation.org: add __read_mostly, per Marco]
Link: https://lkml.kernel.org/r/20220425022456.44300-1-huangshaobo6@huawei.com
Signed-off-by: huangshaobo <huangshaobo6@huawei.com>
Suggested-by: chenzefeng <chenzefeng2@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Wangbing <wangbing6@huawei.com>
Cc: Jubin Zhong <zhongjubin@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit db71ef79b5 ("hugetlb: make free_huge_page irq safe"), the
subpool lock should be locked with spin_lock_irq() and all call sites was
modified as such, except for the ones in hugetlbfs_statfs().
Link: https://lkml.kernel.org/r/20220429202207.3045-1-almasrymina@google.com
Fixes: db71ef79b5 ("hugetlb: make free_huge_page irq safe")
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Calls to change_protection_range() on THP can trigger, at least on x86,
two TLB flushes for one page: one immediately, when pmdp_invalidate() is
called by change_huge_pmd(), and then another one later (that can be
batched) when change_protection_range() finishes.
The first TLB flush is only necessary to prevent the dirty bit (and with a
lesser importance the access bit) from changing while the PTE is modified.
However, this is not necessary as the x86 CPUs set the dirty-bit
atomically with an additional check that the PTE is (still) present. One
caveat is Intel's Knights Landing that has a bug and does not do so.
Leverage this behavior to eliminate the unnecessary TLB flush in
change_huge_pmd(). Introduce a new arch specific pmdp_invalidate_ad()
that only invalidates the access and dirty bit from further changes.
Link: https://lkml.kernel.org/r/20220401180821.1986781-4-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, using mprotect() to unprotect a memory region or uffd to
unprotect a memory region causes a TLB flush. However, in such cases the
PTE is often not modified (i.e., remain RO) and therefore not TLB flush is
needed.
Add an arch-specific pte_needs_flush() which tells whether a TLB flush is
needed based on the old PTE and the new one. Implement an x86
pte_needs_flush().
Always flush the TLB when it is architecturally needed even when skipping
a TLB flush might only result in a spurious page-faults by skipping the
flush.
Even with such conservative manner, we can in the future further refine
the checks to test whether a PTE is present by only considering the
architectural _PAGE_PRESENT flag instead of {pte|pmd}_preesnt(). For not
be careful and use the latter.
Link: https://lkml.kernel.org/r/20220401180821.1986781-3-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently various places test if direct IO is possible on a file by
checking for the existence of the direct_IO address space operation.
This is a poor choice, as the direct_IO operation may not be used - it is
only used if the generic_file_*_iter functions are called for direct IO
and some filesystems - particularly NFS - don't do this.
Instead, introduce a new f_mode flag: FMODE_CAN_ODIRECT and change the
various places to check this (avoiding pointer dereferences).
do_dentry_open() will set this flag if ->direct_IO is present, so
filesystems do not need to be changed.
NFS *is* changed, to set the flag explicitly and discard the direct_IO
entry in the address_space_operations for files.
Other filesystems which currently use noop_direct_IO could usefully be
changed to set this flag instead.
Link: https://lkml.kernel.org/r/164859778128.29473.15189737957277399416.stgit@noble.brown
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: NeilBrown <neilb@suse.de>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We need to use count_swpout_vm_event() for sio_write_complete() to get
correct counting.
Note that THP swap in (if it ever happens) is current accounted 1 for each
page, whether HUGE or normal. This is different from swap-out accounting.
This patch should be squashed into
MM: handle THP in swap_*page_fs()
Link: https://lkml.kernel.org/r/165146948934.24404.5909750610552745025@noble.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.de>
Reported-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pages passed to swap_readpage()/swap_writepage() are not necessarily all
the same size - there may be transparent-huge-pages involves.
The BIO paths of swap_*page() handle this correctly, but the SWP_FS_OPS
path does not.
So we need to use thp_size() to find the size, not just assume PAGE_SIZE,
and we need to track the total length of the request, not just assume it
is "page * PAGE_SIZE".
Link: https://lkml.kernel.org/r/165119301488.15698.9457662928942765453.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Reported-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
swap_writepage() is given one page at a time, but may be called repeatedly
in succession.
For block-device swapspace, the blk_plug functionality allows the multiple
pages to be combined together at lower layers. That cannot be used for
SWP_FS_OPS as blk_plug may not exist - it is only active when
CONFIG_BLOCK=y. Consequently all swap reads over NFS are single page
reads.
With this patch we pass a pointer-to-pointer via the wbc. swap_writepage
can store state between calls - much like the pointer passed explicitly to
swap_readpage. After calling swap_writepage() some number of times, the
state will be passed to swap_write_unplug() which can submit the combined
request.
Link: https://lkml.kernel.org/r/164859778128.29473.5191868522654408537.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
swap_readpage() is given one page at a time, but may be called repeatedly
in succession.
For block-device swap-space, the blk_plug functionality allows the
multiple pages to be combined together at lower layers. That cannot be
used for SWP_FS_OPS as blk_plug may not exist - it is only active when
CONFIG_BLOCK=y. Consequently all swap reads over NFS are single page
reads.
With this patch we pass in a pointer-to-pointer when swap_readpage can
store state between calls - much like the effect of blk_plug. After
calling swap_readpage() some number of times, the state will be passed to
swap_read_unplug() which can submit the combined request.
Link: https://lkml.kernel.org/r/164859778127.29473.14059420492644907783.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This documentation for ->swap_activate() has been out-of-date for a long
time. This patch updates it to match recent changes, and adds
documentation for the associated ->swap_rw()
Link: https://lkml.kernel.org/r/164859778126.29473.6778751233552859461.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch switches swap-out to SWP_FS_OPS swap-spaces to use ->swap_rw
and makes the writes asynchronous, like they are for other swap spaces.
To make it async we need to allocate the kiocb struct from a mempool.
This may block, but won't block as long as waiting for the write to
complete. At most it will wait for some previous swap IO to complete.
Link: https://lkml.kernel.org/r/164859778126.29473.12399585304843922231.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The nfs_direct_IO() exists to support SWAP IO, but hasn't worked for a
while. We now need a ->swap_rw function which behaves slightly
differently, returning zero for success rather than a byte count.
So modify nfs_direct_IO accordingly, rename it, and use it as the
->swap_rw function.
Link: https://lkml.kernel.org/r/165119301493.15698.7491285551903597618.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> (on Renesas RSK+RZA1 with 32 MiB of SDRAM)
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
swap currently uses ->readpage to read swap pages. This can only request
one page at a time from the filesystem, which is not most efficient.
swap uses ->direct_IO for writes which while this is adequate is an
inappropriate over-loading. ->direct_IO may need to had handle allocate
space for holes or other details that are not relevant for swap.
So this patch introduces a new address_space operation: ->swap_rw. In
this patch it is used for reads, and a subsequent patch will switch writes
to use it.
No filesystem yet supports ->swap_rw, but that is not a problem because
no filesystem actually works with filesystem-based swap.
Only two filesystems set SWP_FS_OPS:
- cifs sets the flag, but ->direct_IO always fails so swap cannot work.
- nfs sets the flag, but ->direct_IO calls generic_write_checks()
which has failed on swap files for several releases.
To ensure that a NULL ->swap_rw isn't called, ->activate_swap() for both
NFS and cifs are changed to fail if ->swap_rw is not set. This can be
removed if/when the function is added.
Future patches will restore swap-over-NFS functionality.
To submit an async read with ->swap_rw() we need to allocate a structure
to hold the kiocb and other details. swap_readpage() cannot handle
transient failure, so we create a mempool to provide the structures.
Link: https://lkml.kernel.org/r/164859778125.29473.13430559328221330589.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If swap-out is using filesystem operations (SWP_FS_OPS), then it is not
safe to enter the FS for reclaim. So only down-grade the requirement for
swap pages to __GFP_IO after checking that SWP_FS_OPS are not being used.
This makes the calculation of "may_enter_fs" slightly more complex, so
move it into a separate function. with that done, there is little value
in maintaining the bool variable any more. So replace the may_enter_fs
variable with a may_enter_fs() function. This removes any risk for the
variable becoming out-of-date.
Link: https://lkml.kernel.org/r/164859778124.29473.16176717935781721855.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If a filesystem wishes to handle all swap IO itself (via ->direct_IO and
->readpage), rather than just providing devices addresses for
submit_bio(), SWP_FS_OPS must be set.
Currently the protocol for setting this it to have ->swap_activate return
zero. In that case SWP_FS_OPS is set, and add_swap_extent() is called for
the entire file.
This is a little clumsy as different return values for ->swap_activate
have quite different meanings, and it makes it hard to search for which
filesystems require SWP_FS_OPS to be set.
So remove the special meaning of a zero return, and require the filesystem
to set SWP_FS_OPS if it so desires, and to always call add_swap_extent()
as required.
Currently only NFS and CIFS return zero for add_swap_extent().
Link: https://lkml.kernel.org/r/164859778123.29473.17908205846599043598.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
folios that are written to swap are owned by the MM subsystem - not any
filesystem.
When such a folio is passed to a filesystem to be written out to a
swap-file, the filesystem handles the data, but the folio itself does not
belong to the filesystem. So calling the filesystem's ->dirty_folio()
address_space operation makes no sense. This is for folios in the given
address space, and a folio to be written to swap does not exist in the
given address space.
So drop swap_dirty_folio() which calls the address-space's
->dirty_folio(), and always use noop_dirty_folio(), which is appropriate
for folios being swapped out.
Link: https://lkml.kernel.org/r/164859778123.29473.6900942583784889976.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "MM changes to improve swap-over-NFS support".
Assorted improvements for swap-via-filesystem.
This is a resend of these patches, rebased on current HEAD. The only
substantial changes is that swap_dirty_folio has replaced
swap_set_page_dirty.
Currently swap-via-fs (SWP_FS_OPS) doesn't work for any filesystem. It
has previously worked for NFS but that broke a few releases back. This
series changes to use a new ->swap_rw rather than ->readpage and
->direct_IO. It also makes other improvements.
There is a companion series already in linux-next which fixes various
issues with NFS. Once both series land, a final patch is needed which
changes NFS over to use ->swap_rw.
This patch (of 10):
Many functions declared in include/linux/swap.h are only used within mm/
Create a new "mm/swap.h" and move some of these declarations there.
Remove the redundant 'extern' from the function declarations.
[akpm@linux-foundation.org: mm/memory-failure.c needs mm/swap.h]
Link: https://lkml.kernel.org/r/164859751830.29473.5309689752169286816.stgit@noble.brown
Link: https://lkml.kernel.org/r/164859778120.29473.11725907882296224053.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: David Howells <dhowells@redhat.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The gup_test binary will fail showing only the output of perror("open") in
the case that /sys/kernel/debug/gup_test is not found. This will almost
always be due to CONFIG_GUP_TEST not being set, which enables
compilation of a kernel that provides this file.
Add a short error message to clarify this failure and point the user to
the solution.
Link: https://lkml.kernel.org/r/20220502224942.995427-1-jsavitz@redhat.com
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pin_user_pages API forces FOLL_PIN in gup_flags, which means that the API
requires struct page **pages to be provided (not NULL). However, the
comment to pin_user_pages() clearly allows for passing in a NULL @pages
argument.
Remove the incorrect comments, and add WARN_ON_ONCE(!pages) calls to
enforce the API.
It has been independently spotted by Minchan Kim and confirmed with
John Hubbard:
https://lore.kernel.org/all/YgWA0ghrrzHONehH@google.com/
Link: https://lkml.kernel.org/r/20220422015839.1274328-1-yury.norov@gmail.com
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Right now, the last 5 bits (0x1f) of the swap entry are used for the type
and the bit before that (0x20) is used for _PAGE_SWP_SOFT_DIRTY. We
cannot use 0x40, as that collides with _RPAGE_RSV1 -- contained in
_PAGE_HPTEFLAGS. The next candidate would be _RPAGE_SW3 (0x200) -- which
is used for _PAGE_SOFT_DIRTY for !swp ptes.
So let's just use _PAGE_SOFT_DIRTY for _PAGE_SWP_SOFT_DIRTY (to make it
easier to grasp) and use 0x20 now for _PAGE_SWP_EXCLUSIVE.
Link: https://lkml.kernel.org/r/20220329164329.208407-9-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
