Pull scheduler fix from Thomas Gleixner:
"A single bug fix to prevent a subtle deadlock in the scheduler core
code vs cpu hotplug"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix cpu.max vs. cpuhotplug deadlock
Pull perf fixes from Thomas Gleixner:
"Four patches which all address lock inversions and deadlocks in the
perf core code and the Intel debug store"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix perf,x86,cpuhp deadlock
perf/core: Fix ctx::mutex deadlock
perf/core: Fix another perf,trace,cpuhp lock inversion
perf/core: Fix lock inversion between perf,trace,cpuhp
Pull locking fixes from Thomas Gleixner:
"Two final locking fixes for 4.15:
- Repair the OWNER_DIED logic in the futex code which got wreckaged
with the recent fix for a subtle race condition.
- Prevent the hard lockup detector from triggering when dumping all
held locks in the system"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Avoid triggering hardlockup from debug_show_all_locks()
futex: Fix OWNER_DEAD fixup
Jeff Kirsher says:
====================
10GbE Intel Wired LAN Driver Updates 2018-01-26
This series contains updates to ixgbe and ixgbevf.
Emil updates ixgbevf to match ixgbe functionality, starting with the
consolidating of functions that represent logical steps in the receive
process so we can later update them more easily. Updated ixgbevf to
only synchronize the length of the frame, which will typically be the
MTU or smaller. Updated the VF driver to use the length of the packet
instead of the DD status bit to determine if a new descriptor is ready
to be processed, which saves on reads and we can save time on
initialization. Added support for DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERING
to help improve performance on some platforms. Updated the VF driver to
do bulk updates of the page reference count instead of just incrementing
it by one reference at a time. Updated the VF driver to only go through
the region of the receive ring that was designated to be cleaned up,
rather than process the entire ring.
Colin Ian King adds the use of ARRAY_SIZE() on various arrays.
Miroslav Lichvar fixes an issue where ethtool was reporting timestamping
filters unsupported for X550, which is incorrect.
Paul adds support for reporting 5G link speed for some devices.
Dan Carpenter fixes a typo where && was used when it should have been
||.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The "return 0" instruction follows other return instruction
and it makes it impossible to execute, hence remove it.
Fixes: 00fc0c51e3 ("rocker: Change world_ops API and implementation to be switchdev independant")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Assign true or false to boolean variables instead of an integer value.
This issue was detected with the help of Coccinelle
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Michael Hanselmann <public@hansmi.ch>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Change the data type of the following variables from int to bool
across all macintosh drivers:
started
slots_started
pm121_started
wf_smu_started
Some of these issues were detected with the help of Coccinelle.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When a CPU detects its locked up via soft_nmi_interrupt() we have
pt_regs, so print the regs->nip, which points to where we took the
soft-NMI.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
soft_nmi_interrupt() is called directly from the asm exception
handling code, which passes regs as a pointer to the stack. So regs
can't be NULL, it may be full of junk, but that's a separate problem.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use pr_fmt() in the watchdog code, so we don't have to say "Watchdog"
so many times.
Rather than "CPU:%d" just spell it "CPU %d", "Hard" doesn't need a
capital in the middle of a sentence, and "LOCKUP other CPUS" should be
"LOCKUP on other CPUS".
Also make it clear when a CPU self detects a lockup by spelling it
out.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The QS21/22 IBM Cell blades had a southbridge chip called Axon. This
could have DDR DIMMs attached to it, though they were not directly
usable as RAM, instead they could be used as some sort of buffer, if
applications were written specifically to use the block device
provided by the driver.
Although the driver supposedly had direct access support, it was
apparently never tested (see commit 91117a2024 ("axonram: Fix bug in
direct_access")).
These machines have not been available for over 5 years, and were
never widely in use. It seems highly unlikely anyone is using this
driver.
In general we're happy to leave old drivers in the tree, but because
DAX is involved this driver is caught up in the ongoing work in that
area, but none of the DAX folks are able to test it.
So remove the driver, if any one *is* using it, we'll be happy to put
it back.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As explained by Michal Marek at https://lkml.org/lkml/2011/8/31/189
silentoldconfig has become a misnomer. It has become an internal interface
so remove it from "make help" and Documentation/ to stop confusing people
using it as seen for instance at
https://chromium-review.googlesource.com/835632 Don't remove it from
kconfig/Makefile yet not to break any (other) tool using it.
On the other hand, correct and expand its description in the help of
the (internal) scripts/kconfig/conf.c
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
We want to expose the hardware features simply in /proc/cpuinfo as "ibrs",
"ibpb" and "stibp". Since AMD has separate CPUID bits for those, use them
as the user-visible bits.
When the Intel SPEC_CTRL bit is set which indicates both IBRS and IBPB
capability, set those (AMD) bits accordingly. Likewise if the Intel STIBP
bit is set, set the AMD STIBP that's used for the generic hardware
capability.
Hide the rest from /proc/cpuinfo by putting "" in the comments. Including
RETPOLINE and RETPOLINE_AMD which shouldn't be visible there. There are
patches to make the sysfs vulnerabilities information non-readable by
non-root, and the same should apply to all information about which
mitigations are actually in use. Those *shouldn't* appear in /proc/cpuinfo.
The feature bit for whether IBPB is actually used, which is needed for
ALTERNATIVEs, is renamed to X86_FEATURE_USE_IBPB.
Originally-by: Borislav Petkov <bp@suse.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ak@linux.intel.com
Cc: dave.hansen@intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: pbonzini@redhat.com
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1517070274-12128-2-git-send-email-dwmw@amazon.co.uk
Calling fan related SMM functions implemented by Dell BIOS firmware on Dell
Inspiron 7720 freeze kernel for about 500ms. Until Dell fixes it we need to
disable fan support for Dell Inspiron 7720 as it makes system unusable.
Via "force" module param fan support can be enabled.
Reported-by: vova7890@mail.ru
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=195751
Cc: stable@vger.kernel.org # v4.0+, will need backport
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some Dell machines are broken and some functionality is disabled. Show
warning into dmesg about this fact and allow user via "force" module param
to override brokenness and enable broken functionality.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If sysfs is disabled and RETPOLINE not defined:
arch/x86/kernel/cpu/bugs.c:97:13: warning: ‘spectre_v2_bad_module’ defined but not used
[-Wunused-variable]
static bool spectre_v2_bad_module;
Hide it.
Fixes: caf7501a1b ("module/retpoline: Warn about missing retpoline in module")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
The hrtimer interrupt code contains a hang detection and mitigation
mechanism, which prevents that a long delayed hrtimer interrupt causes a
continous retriggering of interrupts which prevent the system from making
progress. If a hang is detected then the timer hardware is programmed with
a certain delay into the future and a flag is set in the hrtimer cpu base
which prevents newly enqueued timers from reprogramming the timer hardware
prior to the chosen delay. The subsequent hrtimer interrupt after the delay
clears the flag and resumes normal operation.
If such a hang happens in the last hrtimer interrupt before a CPU is
unplugged then the hang_detected flag is set and stays that way when the
CPU is plugged in again. At that point the timer hardware is not armed and
it cannot be armed because the hang_detected flag is still active, so
nothing clears that flag. As a consequence the CPU does not receive hrtimer
interrupts and no timers expire on that CPU which results in RCU stalls and
other malfunctions.
Clear the flag along with some other less critical members of the hrtimer
cpu base to ensure starting from a clean state when a CPU is plugged in.
Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the
root cause of that hard to reproduce heisenbug. Once understood it's
trivial and certainly justifies a brown paperbag.
Fixes: 41d2e49493 ("hrtimer: Tune hrtimer_interrupt hang logic")
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanos
According to the OPAL docs:
skiboot-5.2.5/doc/opal-api/opal-rtc-read-3.txt
skiboot-5.2.5/doc/opal-api/opal-rtc-write-4.txt
OPAL_HARDWARE may be returned from OPAL_RTC_READ or OPAL_RTC_WRITE and
this indicates either a transient or permanent error.
Prior to this patch, Linux was not dealing with OPAL_HARDWARE being a
permanent error particularly well, in that you could end up in a busy
loop.
This was not too hard to trigger on an AMI BMC based OpenPOWER machine
doing a continuous "ipmitool mc reset cold" to the BMC, the result of
that being that we'd get stuck in an infinite loop in
opal_get_rtc_time().
We now retry a few times before returning the error higher up the
stack.
Fixes: 16b1d26e77 ("rtc/tpo: Driver to support rtc and wakeup on PowerNV platform")
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The mpc52xx_gpt code currently implements an irq_chip for handling
interrupts; due to how irq_chip handling is done, it's necessary for
the irq_chip methods to be invoked from hardirq context, even on a a
real-time kernel. Because the spinlock_t type becomes a "sleeping"
spinlock w/ RT kernels, it is not suitable to be used with irq_chips.
A quick audit of the operations under the lock reveal that they do
only minimal, bounded work, and are therefore safe to do under a raw
spinlock.
Signed-off-by: Julia Cartwright <julia@ni.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use pr_cont where appropriate, and switch to pr_foo throughout.
Additionally, lower messages in adb_probe_task to debug level.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
[mpe: Clean up whitespace slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On powerpc systems with shared configurations of CPUs and memory and
memoryless nodes at boot, an event ordering problem was observed on a
SLES12 build platforms with the hot-add of CPUs to the memoryless
nodes.
* The most common error occurred when the memory SLAB driver attempted
to reference the memoryless node to which a CPU was being added
before the kernel had finished initializing all of the data
structures for the CPU and exited 'device_online' under
DLPAR/hot-add.
Normally the memoryless node would be initialized through the call
path device_online ... arch_update_cpu_topology ... find_cpu_nid ...
try_online_node. This patch ensures that the powerpc node will be
initialized as early as possible, even if it was memoryless and
CPU-less at the point when we are trying to hot-add a new CPU to it.
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fixes some problems encountered at runtime with
configurations that support memory-less nodes, or that hot-add CPUs
into nodes that are memoryless during system execution after boot. The
problems of interest include:
* Nodes known to powerpc to be memoryless at boot, but to have CPUs in
them are allowed to be 'possible' and 'online'. Memory allocations
for those nodes are taken from another node that does have memory
until and if memory is hot-added to the node.
* Nodes which have no resources assigned at boot, but which may still
be referenced subsequently by affinity or associativity attributes,
are kept in the list of 'possible' nodes for powerpc. Hot-add of
memory or CPUs to the system can reference these nodes and bring
them online instead of redirecting the references to one of the set
of nodes known to have memory at boot.
Note that this software operates under the context of CPU hotplug. We
are not doing memory hotplug in this code, but rather updating the
kernel's CPU topology (i.e. arch_update_cpu_topology /
numa_update_cpu_topology). We are initializing a node that may be used
by CPUs or memory before it can be referenced as invalid by a CPU
hotplug operation. CPU hotplug operations are protected by a range of
APIs including cpu_maps_update_begin/cpu_maps_update_done,
cpus_read/write_lock / cpus_read/write_unlock, device locks, and more.
Memory hotplug operations, including try_online_node, are protected by
mem_hotplug_begin/mem_hotplug_done, device locks, and more. In the
case of CPUs being hot-added to a previously memoryless node, the
try_online_node operation occurs wholly within the CPU locks with no
overlap. Using HMC hot-add/hot-remove operations, we have been able to
add and remove CPUs to any possible node without failures. HMC
operations involve a degree self-serialization, though.
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On powerpc systems which allow 'hot-add' of CPU or memory resources,
it may occur that the new resources are to be inserted into nodes that
were not used for these resources at bootup. In the kernel, any node
that is used must be defined and initialized. These empty nodes may
occur when,
* Dedicated vs. shared resources. Shared resources require information
such as the VPHN hcall for CPU assignment to nodes. Associativity
decisions made based on dedicated resource rules, such as
associativity properties in the device tree, may vary from decisions
made using the values returned by the VPHN hcall.
* memoryless nodes at boot. Nodes need to be defined as 'possible' at
boot for operation with other code modules. Previously, the powerpc
code would limit the set of possible nodes to those which have
memory assigned at boot, and were thus online. Subsequent add/remove
of CPUs or memory would only work with this subset of possible
nodes.
* memoryless nodes with CPUs at boot. Due to the previous restriction
on nodes, nodes that had CPUs but no memory were being collapsed
into other nodes that did have memory at boot. In practice this
meant that the node assignment presented by the runtime kernel
differed from the affinity and associativity attributes presented by
the device tree or VPHN hcalls. Nodes that might be known to the
pHyp were not 'possible' in the runtime kernel because they did not
have memory at boot.
This patch ensures that sufficient nodes are defined to support
configuration requirements after boot, as well as at boot. This patch
set fixes a couple of problems.
* Nodes known to powerpc to be memoryless at boot, but to have CPUs in
them are allowed to be 'possible' and 'online'. Memory allocations
for those nodes are taken from another node that does have memory
until and if memory is hot-added to the node. * Nodes which have no
resources assigned at boot, but which may still be referenced
subsequently by affinity or associativity attributes, are kept in
the list of 'possible' nodes for powerpc. Hot-add of memory or CPUs
to the system can reference these nodes and bring them online
instead of redirecting to one of the set of nodes that were known to
have memory at boot.
This patch extracts the value of the lowest domain level (number of
allocable resources) from the device tree property
"ibm,max-associativity-domains" to use as the maximum number of nodes
to setup as possibly available in the system. This new setting will
override the instruction:
nodes_and(node_possible_map, node_possible_map, node_online_map);
presently seen in the function arch/powerpc/mm/numa.c:initmem_init().
If the "ibm,max-associativity-domains" property is not present at
boot, no operation will be performed to define or enable additional
nodes, or enable the above 'nodes_and()'.
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
clear_thread_tidr() is called in interrupt context as a part of delayed
put of the task structure (i.e as a part of timer interrupt). To prevent
a deadlock, block interrupts when holding vas_thread_id_lock to set/
clear TIDR for a task.
Fixes: ec233ede4c ("powerpc: Add support for setting SPRN_TIDR")
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The pcidev value stored in pci_dn is only used for NPU/NPU2
initialization. We can easily drop the cached pointer and
use an ancient helper - pci_get_domain_bus_and_slot() instead in order
to reduce complexity.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Most of the time, flush_tlb_range() is called on single pages.
At the time being, flush_tlb_range() inconditionnaly calls
flush_tlb_mm() which flushes at least the entire PID pages and on
older CPUs like 4xx or 8xx it flushes the entire TLB table.
This patch calls flush_tlb_page() instead of flush_tlb_mm() when
the range is a single page.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Due to some unfortunate events, I have not been directly involved in
the x86 kernel patch flow for a while now. I have also not been able
to ramp back up by now like I had hoped to, and after reviewing what I
will need to work on both internally at Intel and elsewhere in the near
term, it is clear that I am not going to be able to ramp back up until
late 2018 at the very earliest.
It is not acceptable to not recognize that this load is currently
taken by Ingo and Thomas without my direct participation, so I mark
myself as R: (designated reviewer) rather than M: (maintainer) until
further notice. This is in fact recognizing the de facto situation
for the past few years.
I have obviously no intention of going away, and I will do everything
within my power to improve Linux on x86 and x86 for Linux. This,
however, puts credit where it is due and reflects a change of focus.
This patch also removes stale entries for portions of the x86
architecture which have not been maintained separately from arch/x86
for a long time. If there is a reason to re-introduce them then that
can happen later.
Signed-off-by: H. Peter Anvin <h.peter.anvin@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bruce Schlobohm <bruce.schlobohm@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180125195934.5253-1-hpa@zytor.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When enabling SR-IOV in pseries platform, the VF bar properties for a
PF are reported on the device node in the device tree.
This patch adds the IOV Bar resources to Linux structures from the
device tree for later use when configuring SR-IOV by PF driver.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
After initial validation of SR-IOV resources, firmware will associate
PEs to the dynamic VFs created within this call. This patch adds the
association of PEs to the PF array of PE numbers indexed by VF.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Introduce a method for notify resume to be called from sysfs. In this
patch one can now call notify resume from sysfs when is supported by
platform.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
[mpe: Add NULL check, add empty versions to avoid #ifdefs]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When pseries SR-IOV is enabled and after a PF driver has resumed from
EEH, platform has to be notified of the event so the child VFs can be
allowed to resume their normal recovery path.
This patch makes the EEH operation allow unfreeze platform dependent
code and adds the call to pseries EEH code.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To correctly use EEH code one has to make sure that the EEH_PE_VF is
set for dynamic created VFs. Therefore this patch allocates an eeh_pe
of eeh type EEH_PE_VF and associates PE with parent.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Devices can go offline when erors reported. This patch adds a change
to the kernel object and lets udev know of error. When device resumes,
a change is also set reporting device as online. Therefore, EEH and
AER events are better propagated to user space for PCI devices in all
arches.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add EEH platform operations for pseries to update VF config space.
With this change after EEH, the VF will have updated config space for
pseries platform.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
ocxl.rst gives a quick, high-level view of opencapi.
Update ioctl-number.txt to reflect ioctl numbers being used by the
ocxl driver
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
[mpe: Fix up mixed whitespace as spotted by gregkh]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Group together the calls to alloc_vmcs and loaded_vmcs_init. Soon we'll also
allocate an MSR bitmap there.
Cc: stable@vger.kernel.org # prereq for Spectre mitigation
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The potential performance advantages of a vmcs02 pool have never been
realized. To simplify the code, eliminate the pool. Instead, a single
vmcs02 is allocated per VCPU when the VCPU enters VMX operation.
Cc: stable@vger.kernel.org # prereq for Spectre mitigation
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-by: Ameya More <ameya.more@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Yonghong Song says:
====================
A kernel page fault which happens in lpm map trie_get_next_key is reported
by syzbot and Eric. The issue was introduced by commit b471f2f1de
("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE map").
Patch #1 fixed the issue in the kernel and patch #2 adds a multithreaded
test case in tools/testing/selftests/bpf/test_lpm_map.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The new test will spawn four threads, doing map update, delete, lookup
and get_next_key in parallel. It is able to reproduce the issue in the
previous commit found by syzbot and Eric Dumazet.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit b471f2f1de ("bpf: implement MAP_GET_NEXT_KEY command
for LPM_TRIE map") introduces a bug likes below:
if (!rcu_dereference(trie->root))
return -ENOENT;
if (!key || key->prefixlen > trie->max_prefixlen) {
root = &trie->root;
goto find_leftmost;
}
......
find_leftmost:
for (node = rcu_dereference(*root); node;) {
In the code after label find_leftmost, it is assumed
that *root should not be NULL, but it is not true as
it is possbile trie->root is changed to NULL by an
asynchronous delete operation.
The issue is reported by syzbot and Eric Dumazet with the
below error log:
......
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 8033 Comm: syz-executor3 Not tainted 4.15.0-rc8+ #4
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:trie_get_next_key+0x3c2/0xf10 kernel/bpf/lpm_trie.c:682
......
This patch fixed the issue by use local rcu_dereferenced
pointer instead of *(&trie->root) later on.
Fixes: b471f2f1de ("bpf: implement MAP_GET_NEXT_KEY command or LPM_TRIE map")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* clk-aspeed:
clk: aspeed: Handle inverse polarity of USB port 1 clock gate
clk: aspeed: Fix return value check in aspeed_cc_init()
clk: aspeed: Add reset controller
clk: aspeed: Register gated clocks
clk: aspeed: Add platform driver and register PLLs
clk: aspeed: Register core clocks
clk: Add clock driver for ASPEED BMC SoCs
dt-bindings: clock: Add ASPEED constants
* clk-lock-UP:
clk: fix reentrancy of clk_enable() on UP systems
* clk-mediatek:
clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built
clk: mediatek: Fix all warnings for missing struct clk_onecell_data
clk: mediatek: fixup test-building of MediaTek clock drivers
clk: mediatek: group drivers under indpendent menu
* clk-allwinner:
clk: sunxi-ng: a83t: Add M divider to TCON1 clock
clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU
clk: sunxi-ng: add support for Allwinner H3 DE2 CCU
dt-bindings: fix the binding of Allwinner DE2 CCU of A83T and H3
clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL
clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL
clk: sunxi-ng: Support fixed post-dividers on NM style clocks
clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks
clk: sunxi-ng: Support fixed post-dividers on MP style clocks
clk: sunxi: Use PTR_ERR_OR_ZERO()
* clk-remove-asm-clkdev:
clk: Move __clk_{get,put}() into private clk.h API
clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks
arch: Remove clkdev.h asm-generic from Kbuild
clk: Prepare to remove asm-generic/clkdev.h
blackfin: Use generic clkdev.h header
* clk-debugfs-fixes:
clk: Simplify debugfs registration
clk: Fix debugfs_create_*() usage
clk: Show symbolic clock flags in debugfs
clk: Improve flags doc for of_clk_detect_critical()
* clk-renesas:
clk: renesas: r8a7796: Add FDP clock
clk: renesas: cpg-mssr: Keep wakeup sources active during system suspend
clk: renesas: mstp: Keep wakeup sources active during system suspend
clk: renesas: r8a77970: Add LVDS clock
* clk-meson:
clk: meson-axg: fix potential NULL dereference in axg_clkc_probe()
clk: meson-axg: make local symbol axg_gp0_params_table static
clk: meson-axg: fix return value check in axg_clkc_probe()
clk: meson: mpll: use 64-bit maths in params_from_rate
clk: meson-axg: add clock controller drivers
clk: meson-axg: add clocks dt-bindings required header
dt-bindings: clock: add compatible variant for the Meson-AXG
clk: meson: make the spinlock naming more specific
clk: meson: gxbb: remove IGNORE_UNUSED from mmc clocks
clk: meson: gxbb: fix wrong clock for SARADC/SANA
