The property "mediatek,pctl" is only required for SoCs such as MT2701 and
MT7623, so adding a few words for stating the condition.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
DT unit addresses should be lower case hex. Fix all the
binding examples.
Converted with the following command from Krzysztof Kozlowski:
sed -e 's/@\([a-fA-F0-9_-]*\) {/@\L\1 {/' -i $(find Documentation/devicetree/bindings -name '*.txt')
Signed-off-by: Rob Herring <robh@kernel.org>
In the provided example the unit address does not match the 'reg' value,
as IMX7_POWER_DOMAIN_PCIE_PHY is defined as 1.
Fix the unit address and avoid using defines in reg as per Rob
Herring's recommendation.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GKTW70SDAE4SE is an LVDS display panel.
Their bindings are modelled on the the LVDS panel bindings.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lots of overlapping changes. Also on the net-next side
the XDP state management is handled more in the generic
layers so undo the 'net' nfp fix which isn't applicable
in net-next.
Include a necessary change by Jakub Kicinski, with log message:
====================
cls_bpf no longer takes care of offload tracking. Make sure
netdevsim performs necessary checks. This fixes a warning
caused by TC trying to remove a filter it has not added.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Devices have inter-dependencies some times. For example a device that
needs to run at 800 MHz, needs another device (e.g. Its power domain) to
be configured at a particular operating performance point.
This patch introduces a new property "required-opp" which can be present
directly in a device's node (if it doesn't need to change its OPPs), or
in device's OPP nodes. More details on the property can be seen in the
binding itself.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Power-domains can also have their active states and this patch enhances
the OPP binding to define those. The power domains can use the OPP
bindings as is, with one additional change to Allow
"operating-points-v2" property to contain multiple phandles for power
domain providers providing multiple domains.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
More divider clocks are needed by IP. So enlarge the PLL divider
array to accommodate more divider clocks.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Pull "Rockchip dts64 changes for 4.16" from Heiko Stübner:
General RK3399 gets Mipi nodes, fixes for usb3 support and better support
for the type-c phys. The Kevin Chromebooks based on rk3399 now can use their
internal edp displays. RK3328 gets its efuse node and Mali450 gpu node,
which actually produces already some nice results with the WIP Lima driver.
* tag 'v4.16-rockchip-dts64-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add efuse device node for RK3328 SoC
arm64: dts: rockchip: add rk3328 mali gpu node
dt-bindings: gpu: mali-utgard: add rockchip,rk3328-mali compatible
arm64: dts: rockchip: add extcon nodes and enable tcphy rk3399-gru
arm64: dts: rockchip: add usb3-phy otg-port support for rk3399
arm64: dts: rockchip: add reset property for dwc3 controllers on rk3399
arm64: dts: rockchip: add the aclk_usb3 clocks for USB3 on rk3399
arm64: dts: rockchip: add pd_usb3 power-domain node for rk3399
arm64: dts: rockchip: Enable edp disaplay on kevin
arm64: dts: rockchip: update mipi cells for RK3399
arm64: dts: rockchip: add mipi_dsi1 support for rk3399
arm64: dts: rockchip: add rk3399 DSI0 reset
Pull "arm: Updates of armv7 DTS for v4.15-next" from Matthias Brugger:
- add reset cells mt2701 and mt7623 ethsys
- update mmc nodes for mt7623
- mt7623 change mmc card detection pin to active low
- mt7623 set unit address to lower case
* tag 'v4.15-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
dt-bindings: ARM: Mediatek: Fix ethsys documentation
arm: mt7: dts: Remove leading 0x and 0s from bindings notation
arm: dts: mt7623: fix card detection issue on bananapi-r2
arm: dts: mt7623: update mmc related nodes with the appropriate fallback
arm: dts: mt2701: Add reset-cells
arm: dts: mt7623: Update ethsys binding
Pull "memory: tegra: Changes for v4.16-rc1" from Thierry Reding:
The Tegra memory controller driver will now instruct the SMMU driver to
create groups, which will make it easier for device drivers to share an
IOMMU domain between multiple devices.
Initial Tegra186 support is also added in a separate driver.
* tag 'tegra-for-4.16-memory' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
iommu/tegra-smmu: Fix return value check in tegra_smmu_group_get()
iommu/tegra: Allow devices to be grouped
memory: tegra: Create SMMU display groups
memory: tegra: Add Tegra186 support
dt-bindings: memory: Add Tegra186 support
dt-bindings: misc: Add Tegra186 MISC registers bindings
Pull "dt-bindings: Updates for v4.16-rc1" from Thierry Reding:
This contains a set of patches that extend existing bindings with support
for Tegra186.
* tag 'tegra-for-4.16-dt-bindings' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: memory: Add Tegra186 support
dt-bindings: misc: Add Tegra186 MISC registers bindings
Otherwise we cannot use generic OF_DEV_AUXDATA match without listing
all the compatibles separately for OF_DEV_AUXDATA. Let's also update the
binding accordingly.
Let's also fix omap4.dtsi to use "ti,sysc-omap4-sr" compatible as we
have documented in the binding. This was not noticed earlier as we're
still probing SmartReflex driver with platform data.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Pull "Renesas ARM Based SoC DT Bindings Updates for v4.16" from Simon Horman:
* Document V3MSK board bindings
These are the bindings for the R-Car V3M Starter Kit
* Document M3-W-based Salvator-XS board bingigns
Geert Uytterhoeven says "The Renesas Salvator-XS (Salvator-X 2nd version)
development board can be equipped with either an R-Car H3 ES2.0 or M3-W
ES1.x SiP, which are pin-compatible."
* tag 'renesas-dt-bindings-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: renesas: document V3MSK board bindings
ARM: shmobile: Document Renesas M3-W-based Salvator-XS board DT bindings
Add support for the ARTPEC-7 SoC in the artpec6 driver.
The ARTPEC-6 SoC and the ARTPEC-7 SoC are very similar.
Unfortunately, some fields in the PCIECFG and PCIESTAT
register have changed.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
The PCIe controller integrated in ARTPEC-6 SoCs is capable of operating in
endpoint mode. Add endpoint mode support to the artpec6 driver.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Correct the Device Tree bindings for the HIF_CPUBIUCTRL node whose
compatible string is actually brcm,bcm<chip-id>-cpu-biu-ctrl. Also
document in the binding the fallback property
("brcm,brcmstb-cpu-biu-ctrl") and update the example accordingly.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Broadcom's Brahma-B53 CPU is an ARMv8A processor used on a number of
DSL, Cable Modem and Set-top-box SoCs.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
omapdrm changes for v4.16
* support memory bandwidth limits
* DSI command mode panel cleanups for N9
* DMM error handling
* tag 'omapdrm-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (27 commits)
drm: omapdrm: Simplify platform registration
drm: omapdrm: Remove filename from header and fix copyright tag
drm/omap: DMM: Check for DMM readiness after successful transaction commit
drm/omap: DMM: Print information if we received an error interrupt
drm/omap: DMM: In case of error/timeout in wait_status() print the reason
drm/omap: DMM: Fix DMM_IRQSTAT_ERR_MASK definition
drm: omapdrm: Deconstruct the omap_drv.h header.
drm: omapdrm: venc: Return error code on OF parsing failure
drm: omapdrm: dpi: Remove dpi_data port_initialized field
drm: omapdrm: dss: Make dss_dump_clocks() function static
drm: omapdrm: dss: Set the DMA coherent mask
drm: omapdrm: Remove unused omap_dss_find_device() function
drm: omapdrm: Pass drm_device to omap_gem_resume()
drm: omapdrm: dpi: Don't treat GPIO probe deferral as an error
drm/omap: panel-dsi-cm: switch to gpiod
drm/omap: panel-dsi-cm: add external backlight support
drm/omap: panel-dsi-cm: add physical size support
drm/omap: panel-dsi-cm: add regulator support
drm/omap: panel-dsi-cm: fix driver
drm/omap: add support for physical size hints from display drivers
...
Attempt to acquire the APCS IPC through the mailbox framework and fall
back to the old syscon based approach, to allow us to move away from
using the syscon.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Pull spi fixes from Mark Brown:
"A bunch of really small fixes here, all driver specific and mostly in
error handling and remove paths.
The most important fixes are for the a3700 clock configuration and a
fix for a nasty stall which could potentially cause data corruption
with the xilinx driver"
* tag 'spi-fix-v4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: atmel: fixed spin_lock usage inside atmel_spi_remove
spi: sun4i: disable clocks in the remove function
spi: rspi: Do not set SPCR_SPE in qspi_set_config_register()
spi: Fix double "when"
spi: a3700: Fix clk prescaling for coefficient over 15
spi: xilinx: Detect stall with Unknown commands
spi: imx: Update device tree binding documentation
The ethsys registers a reset controller, so we need to specify a
reset cell. This patch fixes the documentation.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Update the IPMMU DT binding documentation to include the
r8a77970 (R-Car V3M) and r8a77995 (R-Car D3) compat strings.
Based on work for r8a7796 by Magnus Damm.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
pinctrl: sh-pfc: Updates for v4.16
- Add CAN pin groups on RZ/G1E,
- Add CAN and CAN FD pin groups on R-Car H3 ES2.0, and R-Car D3,
- Add support for the new R-Car V3M SoC,
- Add support for I2C on R-Car D3,
- Small fixes and cleanups.
This driver consists of 2 controllers due to a hole in mapping:
-1 controller for GPIO bankA to K.
-1 controller for GPIO bankZ.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The compatible string for this panel was specified as
toshiba,lt089ac29000.txt. I believe this is a mistake.
Fixes: 06e733e41f ("drm/panel: simple: add Toshiba LT089AC19000")
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
The drivers/net/wireless/intel/iwlwifi/pcie/drv.c conflict was
resolved using a diff provided by Kalle in his pull request.
Kalle Valo says:
====================
wireless-drivers-next patches for 4.16
A bigger pull request this time, the most visible change being the new
driver mt76. But there's also Kconfig refactoring in ath9k and ath10k,
work beginning in iwlwifi to have rate scaling in firmware/hardware,
wcn3990 support getting closer in ath10k and lots of smaller changes.
mt76
* a new driver for MT76x2e, a 2x2 PCIe 802.11ac chipset by MediaTek
ath10k
* enable multiqueue support for all hw using mac80211 wake_tx_queue op
* new Kconfig option ATH10K_SPECTRAL to save RAM
* show tx stats on QCA9880
* new qcom,ath10k-calibration-variant DT entry
* WMI layer support for wcn3990
ath9k
* new Kconfig option ATH9K_COMMON_SPECTRAL to save RAM
wcn36xx
* hardware scan offload support
wil6210
* run-time PM support when interface is down
iwlwifi
* initial work for rate-scaling offload
* Support for new FW API version 36
* Rename the temporary hw name A000 to 22000
ssb
* make SSB a menuconfig to ease disabling it all
mwl8k
* enable non-DFS 5G channels 149-165
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2017-12-18
Here's the first bluetooth-next pull request for the 4.16 kernel.
- hci_ll: multiple cleanups & fixes
- Remove Gustavo Padovan from the MAINTAINERS file
- Support BLE Adversing while connected (if the controller can do it)
- DT updates for TI chips
- Various other smaller cleanups & fixes
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
SLIMbus (Serial Low Power Interchip Media Bus) is a specification
developed by MIPI (Mobile Industry Processor Interface) alliance.
SLIMbus is a 2-wire implementation, which is used to communicate with
peripheral components like audio-codec.
This patch adds device tree bindings for the slimbus.
Signed-off-by: Sagar Dharia <sdharia@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviwed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
