drm/i915 fixes for v5.11-rc7:
- Skip vswing programming for TBT
- Power up combo PHY lanes for HDMI
- Fix double YUV range correction on HDR planes
- Fix the MST PBN divider calculation
- Fix LTTPR vswing/pre-emp setting in non-transparent mode
- Move the breadcrumb to the signaler if completed upon cancel
- Close race between enable_breadcrumbs and cancel_breadcrumbs
- Drop lru bumping on display unpinning
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87bld0f36b.fsf@intel.com
Since I wrote the below patch if you run a debug kernel you can a
dma debug warning like:
nouveau 0000:1f:00.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000016e012000] [size=4096 bytes]
The old nouveau code wasn't consolidate the pages like the ttm code,
but the dma-debug expects the sync code to give it the same base/range
pairs as the allocator.
Fix the nouveau sync code to consolidate pages before calling the
sync code.
Fixes: bd549d35b4 ("nouveau: use ttm populate mapping functions. (v2)")
Reported-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/417588/
[why]
An old dc_sink state is causing a memory leak because it is missing a
dc_sink_release before a new dc_sink is assigned back to
aconnector->dc_sink.
[how]
Decrement the dc_sink refcount before reassigning it to a new dc_sink.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
drm_atomic_commit was changed so that the caller must free their
drm_atomic_state reference on successes.
[how]
Add drm_atomic_commit_put after drm_atomic_commit call in
dm_force_atomic_commit.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need to unassign DSC from pipes that are not using it
so other pipes can acquire it. That is needed for
asic's that have unmatching number of DSC engines from
the number of pipes.
[how]
Before acquiring dsc to stream resources, first remove it.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Eryk Brol <Eryk.Brol@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently we discard the current context and recreate it. The current
context is what is applied to the HW so we should be re-using this
rather than creating a new context.
Recreating the context can lead to mismatch between new context and the
current context
For example: gsl groups get changed when we create a new context this
can cause issues in a multi display config (with flip immediate) because
we don't align the existing gsl groups in the new and current context.
If we reuse the current context the gsl group assignment stays the same.
[How]
Instead of discarding the current context, we instead just copy the
current state and add/remove planes and streams.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Anson Jacob <Anson.Jacob@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some newer APUs can scanout directly from GTT, that saves us from
allocating another bounce buffer in VRAM and enables freesync in such
configurations.
Without this patch creating a framebuffer from the imported BO will
fail and userspace will fall back to a copy.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Vangogh:
The offset of the CGTS_TCC_DISABLE is 0x5006 by calculation.
The offset of the CGTS_USER_TCC_DISABLE is 0x5007 by calculation.
Signed-off-by: chen gong <curry.gong@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The DP PHY vswing/pre-emphasis level programming the driver does is
related to the DPTX -> first LTTPR link segment only. Accordingly it
should be only programmed when link training the first LTTPR and kept
as-is when training subsequent LTTPRs and the DPRX. For these latter
PHYs the vs/pe levels will be set in response to writing the
DP_TRAINING_LANEx_SET_PHY_REPEATERy DPCD registers (by an upstream LTTPR
TX PHY snooping this write access of its downstream LTTPR/DPRX RX PHY).
The above is also described in DP Standard v2.0 under 3.6.6.1.
While at it simplify and add the LTTPR that is link trained to the debug
message in intel_dp_set_signal_levels().
Fixes: b30edfd8d0 ("drm/i915: Switch to LTTPR non-transparent mode link training")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201229172201.4155327-2-imre.deak@intel.com
(cherry picked from commit 67fba3f1c7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Atm the driver will calculate a wrong MST timeslots/MTP (aka time unit)
value for MST streams if the link parameters (link rate or lane count)
are limited in a way independent of the sink capabilities (reported by
DPCD).
One example of such a limitation is when a MUX between the sink and
source connects only a limited number of lanes to the display and
connects the rest of the lanes to other peripherals (USB).
Another issue is that atm MST core calculates the divider based on the
backwards compatible DPCD (at address 0x0000) vs. the extended
capability info (at address 0x2200). This can result in leaving some
part of the MST BW unused (For instance in case of the WD19TB dock).
Fix the above two issues by calculating the PBN divider value based on
the rate and lane count link parameters that the driver uses for all
other computation.
Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/2977
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-2-imre.deak@intel.com
(cherry picked from commit b59c27cab2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If we enable_breadcrumbs for a request while that request is being
removed from HW; we may see that the request is active as we take the
ce->signal_lock and proceed to attach the request to ce->signals.
However, during unsubmission after marking the request as inactive, we
see that the request has not yet been added to ce->signals and so skip
the removal. Pull the check during cancel_breadcrumbs under the same
spinlock as enabling so that we the two tests are consistent in
enable/cancel.
Otherwise, we may insert a request onto ce->signals that we expect should
not be there:
intel_context_remove_breadcrumbs:488 GEM_BUG_ON(!__i915_request_is_complete(rq))
While updating, we can note that we are always called with
irqs-disabled, due to the engine->active.lock being held at the single
caller, and so remove the irqsave/restore making it symmetric to
enable_breadcrumbs.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2931
Fixes: c18636f763 ("drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: <stable@vger.kernel.org> # v5.10+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119162057.31097-1-chris@chris-wilson.co.uk
(cherry picked from commit e7004ea4f5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
While we do handle the additional cursor sizes introduced in NVE4, it looks
like we accidentally broke this when converting over to use Nvidia's
display headers. Since we now use NVVAL in dispnv50/head907d.c in order to
format the value for the cursor layout and NVD9 only had one byte reserved
vs. the 2 bytes reserved in later generations, we end up accidentally
stripping the second bit in the cursor layout format parameter - causing us
to set the wrong cursor size.
This fixes that by adding our own curs_set hook for 917d which uses the
NV917D headers.
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: <stable@vger.kernel.org> # v5.9+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: ed0b86a90b ("drm/nouveau/kms/nv50-: use NVIDIA's headers for core head_curs_set()")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fixes a crash when trying to create a channel on e.g. Turing GPUs when
NOUVEAU_SVM_INIT was called before.
Fixes: eeaf06ac1a ("drm/nouveau/svm: initial support for shared virtual memory")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Commit f844eb485e introduced a regression for
NV50, which lead to visual artifacts, tearing and eventual crashes.
In the changes of f844eb485e only the first line
was correctly translated to the new NVIDIA header macros:
- PUSH_NVSQ(push, NV827C, 0x0110, 0,
- 0x0114, 0);
+ PUSH_MTHD(push, NV827C, SET_PROCESSING,
+ NVDEF(NV827C, SET_PROCESSING, USE_GAIN_OFS, DISABLE));
The lower part ("0x0114, 0") was probably omitted by accident.
This patch restores the push of the missing data and fixes the regression.
Signed-off-by: Bastian Beranek <bastian.beischer@rwth-aachen.de>
Fixes: f844eb485e ("drm/nouveau/kms/nv50-: use NVIDIA's headers for wndw image_set()")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/14
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
clang warns about the -mhard-float command line arguments
on architectures that do not support this:
clang: error: argument unused during compilation: '-mhard-float' [-Werror,-Wunused-command-line-argument]
Move this into the gcc-specific arguments.
Fixes: e77165bf7b ("drm/amd/display: Add DCN3 blocks to Makefile")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm hotplug handling code (drm_client_dev_hotplug()) can wait on mutex,
thus delaying further lt9611uxc IRQ events processing. It was observed
occasionally during bootups, when drm_client_modeset_probe() was waiting
for EDID ready event, which was delayed because IRQ handler was stuck
trying to deliver hotplug event.
Move hotplug notifications from IRQ handler to separate work to be able
to process IRQ events without delays.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 0cbbd5b1a0 ("drm: bridge: add support for lontium LT9611UXC bridge")
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121233303.1221784-4-dmitry.baryshkov@linaro.org
The first thing the active retirement worker does is decrement the
i915_active count.
The first thing we do during i915_active_wait is try to increment the
i915_active count, but only if already active [non-zero].
The wait may see that the retirement is already started and so marked the
i915_active as idle, and skip waiting for the retirement handler.
However, the caller of i915_active_wait may immediately free the
i915_active upon returning (e.g. i915_vma_destroy) so we must not return
before the concurrent access from the worker is completed. We must
always flush the worker.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2473
Fixes: 274cbf20fd ("drm/i915: Push the i915_active.retire into a worker")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121232807.16618-1-chris@chris-wilson.co.uk
(cherry picked from commit 977a372e972cb42799746c284035a33c64ebace9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
