If the cpufreq policy max limit is changed when intel_pstate operates
in the passive mode with HWP enabled and the "powersave" governor is
used on top of it, the HWP max limit is not updated as appropriate.
Namely, in the "powersave" governor case, the target P-state
is always equal to the policy min limit, so if the latter does
not change, intel_cpufreq_adjust_hwp() is not invoked to update
the HWP Request MSR due to the "target_pstate != old_pstate" check
in intel_cpufreq_update_pstate(), so the HWP max limit is not
updated as a result.
Also, if the CPUFREQ_NEED_UPDATE_LIMITS flag is not set for the
driver and the target frequency does not change along with the
policy max limit, the "target_freq == policy->cur" check in
__cpufreq_driver_target() prevents the driver's ->target() callback
from being invoked at all, so the HWP max limit is not updated.
To prevent that occurring, set the CPUFREQ_NEED_UPDATE_LIMITS flag
in the intel_cpufreq driver structure if HWP is enabled and modify
intel_cpufreq_update_pstate() to do the "target_pstate != old_pstate"
check only in the non-HWP case and let intel_cpufreq_adjust_hwp()
always run in the HWP case (it will update HWP Request only if the
cached value of the register is different from the new one including
the limits, so if neither the target P-state value nor the max limit
changes, the register write will still be avoided).
Fixes: f6ebbcf08f ("cpufreq: intel_pstate: Implement passive mode with HWP enabled")
Reported-by: Zhang Rui <rui.zhang@intel.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+: 1c534352f4 cpufreq: Introduce CPUFREQ_NEED_UPDATE_LIMITS ...
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Generally, a cpufreq driver may need to update some internal upper
and lower frequency boundaries on policy max and min changes,
respectively, but currently this does not work if the target
frequency does not change along with the policy limit.
Namely, if the target frequency does not change along with the
policy min or max, the "target_freq == policy->cur" check in
__cpufreq_driver_target() prevents driver callbacks from being
invoked and they do not even have a chance to update the
corresponding internal boundary.
This particularly affects the "powersave" and "performance"
governors that always set the target frequency to one of the
policy limits and it never changes when the other limit is updated.
To allow cpufreq the drivers needing to update internal frequency
boundaries on policy limits changes to avoid this issue, introduce
a new driver flag, CPUFREQ_NEED_UPDATE_LIMITS, that (when set) will
neutralize the check mentioned above.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit 33aa46f252 ("cpufreq: intel_pstate: Use passive mode by
default without HWP") was meant to cause intel_pstate to be used
in the passive mode with the schedutil governor on top of it, but
it missed the case in which either "ondemand" or "conservative"
was selected as the default governor in the existing kernel config,
in which case the previous old governor configuration would be used,
causing the default legacy governor to be used on top of intel_pstate
instead of schedutil.
Address this by preventing "ondemand" and "conservative" from being
configured as the default cpufreq governor in the case when schedutil
is the default choice for the default governor setting.
[Note that the default cpufreq governor can still be set via the
kernel command line if need be and that choice is not limited,
so if anyone really wants to use one of the legacy governors by
default, it can be achieved this way.]
Fixes: 33aa46f252 ("cpufreq: intel_pstate: Use passive mode by default without HWP")
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Cc: 5.8+ <stable@vger.kernel.org> # 5.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
A 'break' following a 'return' statement is pointless, so remove it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- More binding additionalProperties/unevaluatedProperties additions
- More yamllint fixes on additions in the merge window
- CrOS embedded controller schema updates to fix warnings
- LEDs schema update adding ID_RGB
- A reserved-memory fix for regions starting at address 0x0
-----BEGIN PGP SIGNATURE-----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=/tUh
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- More binding additionalProperties/unevaluatedProperties additions
- More yamllint fixes on additions in the merge window
- CrOS embedded controller schema updates to fix warnings
- LEDs schema update adding ID_RGB
- A reserved-memory fix for regions starting at address 0x0
* tag 'devicetree-fixes-for-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Another round of adding missing 'additionalProperties/unevalutatedProperties'
dt-bindings: Explicitly allow additional properties in board/SoC schemas
dt-bindings: More whitespace clean-ups in schema files
mfd: google,cros-ec: add missing properties
dt-bindings: input: convert cros-ec-keyb to json-schema
dt-bindings: i2c: convert i2c-cros-ec-tunnel to json-schema
of: Fix reserved-memory overlap detection
dt-bindings: mailbox: mtk-gce: fix incorrect mbox-cells value
dt-bindings: leds: Update devicetree documents for ID_RGB
The removal of compat_process_vm_{readv,writev} didn't change
process_vm_rw(), which always assumes it's not doing a compat syscall.
Instead of passing in 'false' unconditionally for 'compat', make it
conditional on in_compat_syscall().
[ Both Al and Christoph point out that trying to access a 64-bit process
from a 32-bit one cannot work anyway, and is likely better prohibited,
but that's a separate issue - Linus ]
Fixes: c3973b401e ("mm: remove compat_process_vm_{readv,writev}")
Reported-and-tested-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Without the explicit __always_inline, some RISC-V configs place the
functions out of line, triggering the BUILD_BUG_ON checks in the
function.
Fixes: 11129e8ed4 ("riscv: use memcpy based uaccess for nommu again")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
By doing so we can associate the sequence counter to the chunk_mutex
for lockdep purposes (compiled-out otherwise), the mutex is otherwise
used on the write side.
Also avoid explicitly disabling preemption around the write region as it
will now be done automatically by the seqcount machinery based on the
lock type.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we switched to the iomap infrastructure in b5ff9f1a96e8f ("btrfs:
switch to iomap for direct IO") we're calling generic_file_buffered_read()
directly and not via generic_file_read_iter() anymore.
If the read could read everything there is no need to bother calling
generic_file_buffered_read(), like it is handled in
generic_file_read_iter().
If we call generic_file_buffered_read() in this case we can hit a
situation where we do an invalid readahead and cause this UBSAN splat
in fstest generic/091:
run fstests generic/091 at 2020-10-21 10:52:32
================================================================================
UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 0 PID: 656 Comm: fsx Not tainted 5.9.0-rc7+ #821
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77
dump_stack+0x57/0x70 lib/dump_stack.c:118
ubsan_epilogue+0x5/0x40 lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0x61/0xe9 lib/ubsan.c:395
__roundup_pow_of_two ./include/linux/log2.h:57
get_init_ra_size mm/readahead.c:318
ondemand_readahead.cold+0x16/0x2c mm/readahead.c:530
generic_file_buffered_read+0x3ac/0x840 mm/filemap.c:2199
call_read_iter ./include/linux/fs.h:1876
new_sync_read+0x102/0x180 fs/read_write.c:415
vfs_read+0x11c/0x1a0 fs/read_write.c:481
ksys_read+0x4f/0xc0 fs/read_write.c:615
do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9 arch/x86/entry/entry_64.S:118
RIP: 0033:0x7fe87fee992e
RSP: 002b:00007ffe01605278 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 000000000004f000 RCX: 00007fe87fee992e
RDX: 0000000000004000 RSI: 0000000001677000 RDI: 0000000000000003
RBP: 000000000004f000 R08: 0000000000004000 R09: 000000000004f000
R10: 0000000000053000 R11: 0000000000000246 R12: 0000000000004000
R13: 0000000000000000 R14: 000000000007a120 R15: 0000000000000000
================================================================================
BTRFS info (device nullb0): has skinny extents
BTRFS info (device nullb0): ZONED mode enabled, zone size 268435456 B
BTRFS info (device nullb0): enabling ssd optimizations
Fixes: f85781fb50 ("btrfs: switch to iomap for direct IO")
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In addition to the rest of Qcom interconnect drivers use icc_sync_state
for SM8150/SM8250 interconnect drivers to notify the interconnect
framework when all consumers are probed and there is no need to keep the
bandwidth set to maximum anymore.
Also move the BCM initialization before creating the nodes to set the
max bandwidth in hardware for the initialization/probing stage.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 7d3b0b0d81 ("interconnect: qcom: Use icc_sync_state")
Link: https://lore.kernel.org/r/20201027133418.976687-1-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
There was a memory corruption bug happening while running the synthetic
event selftests:
kmemleak: Cannot insert 0xffff8c196fa2afe5 into the object search tree (overlaps existing)
CPU: 5 PID: 6866 Comm: ftracetest Tainted: G W 5.9.0-rc5-test+ #577
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
Call Trace:
dump_stack+0x8d/0xc0
create_object.cold+0x3b/0x60
slab_post_alloc_hook+0x57/0x510
? tracing_map_init+0x178/0x340
__kmalloc+0x1b1/0x390
tracing_map_init+0x178/0x340
event_hist_trigger_func+0x523/0xa40
trigger_process_regex+0xc5/0x110
event_trigger_write+0x71/0xd0
vfs_write+0xca/0x210
ksys_write+0x70/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fef0a63a487
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007fff76f18398 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000039 RCX: 00007fef0a63a487
RDX: 0000000000000039 RSI: 000055eb3b26d690 RDI: 0000000000000001
RBP: 000055eb3b26d690 R08: 000000000000000a R09: 0000000000000038
R10: 000055eb3b2cdb80 R11: 0000000000000246 R12: 0000000000000039
R13: 00007fef0a70b500 R14: 0000000000000039 R15: 00007fef0a70b700
kmemleak: Kernel memory leak detector disabled
kmemleak: Object 0xffff8c196fa2afe0 (size 8):
kmemleak: comm "ftracetest", pid 6866, jiffies 4295082531
kmemleak: min_count = 1
kmemleak: count = 0
kmemleak: flags = 0x1
kmemleak: checksum = 0
kmemleak: backtrace:
__kmalloc+0x1b1/0x390
tracing_map_init+0x1be/0x340
event_hist_trigger_func+0x523/0xa40
trigger_process_regex+0xc5/0x110
event_trigger_write+0x71/0xd0
vfs_write+0xca/0x210
ksys_write+0x70/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The cause came down to a use of strcat() that was adding an string that was
shorten, but the strcat() did not take that into account.
strcat() is extremely dangerous as it does not care how big the buffer is.
Replace it with seq_buf operations that prevent the buffer from being
overwritten if what is being written is bigger than the buffer.
Fixes: 10819e2579 ("tracing: Handle synthetic event array field type checking correctly")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In current code, controller_probe() misses to call ida_simple_remove()
in an error path. Jump to correct label to fix it.
Fixes: 17614978ed ("staging: fieldbus: anybus-s: support the Arcx anybus controller")
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201012132404.113031-1-jingxiangfeng@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 8522d62e6b ("staging: wfx: gpiod_get_value() can return an
error") has changed the way the driver test the value returned by
gpiod_get_value(). The new code was wrong.
Fixes: 8522d62e6b ("staging: wfx: gpiod_get_value() can return an error")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201019160604.1609180-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vchiq_instance is allocated with vchiq_initialise() but never
freed properly. Fix memory leak for the vchiq_instance.
Reported-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Link: https://lore.kernel.org/r/1603706150-10806-1-git-send-email-sw0312.kim@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "cb_pcidas" driver supports asynchronous commands on the analog
output (AO) subdevice for those boards that have an AO FIFO. The code
(in `cb_pcidas_ao_check_chanlist()` and `cb_pcidas_ao_cmd()`) to
validate and set up the command supports output to a single channel or
to two channels simultaneously (the boards have two AO channels).
However, the code in `cb_pcidas_auto_attach()` that initializes the
subdevices neglects to initialize the AO subdevice's `len_chanlist`
member, leaving it set to 0, but the Comedi core will "correct" it to 1
if the driver neglected to set it. This limits commands to use a single
channel (either channel 0 or 1), but the limit should be two channels.
Set the AO subdevice's `len_chanlist` member to be the same value as the
`n_chan` member, which will be 2.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20201021122142.81628-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently in case of alignment or FCS error if the packet cannot be
corrected it's still not dropped. Report the error properly and drop the
packet while making the code around a little bit more readable.
Fixes: 80ff0fd3ab ("Staging: Add octeon-ethernet driver files.")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201016145630.41852-1-alexander.sverdlin@nokia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PHYs must be registered once in device probe function, not in device
open callback because it's only possible to register them once.
Fixes: a25e278020 ("staging: octeon: support fixed-link phys")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201016101858.11374-1-alexander.sverdlin@nokia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As reported by "make htmldocs":
./drivers/gpu/drm/drm_prime.c:808: warning: Function parameter or member 'dev' not described in 'drm_prime_pages_to_sg'
Add a description for the new parameter.
Fixes: 707d561f77 ("drm: allow limiting the scatter list size.")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/9366f48e6e9c3ec2f31a3e68452a2b23a1089fce.1603791716.git.mchehab+huawei@kernel.org
It is not possible to create cross-references for duplicated
symbols. While Sphinx always detected it, on Sphinx 3 it
generates warnings like this:
.../Documentation/gpu/drm-kms-helpers:326: ../drivers/gpu/drm/drm_edid.c:1626: WARNING: Duplicate C declaration, also defined in 'gpu/drm-kms-helpers'.
Declaration is 'bool drm_edid_are_equal (const struct edid *edid1, const struct edid *edid2)'.
So, get rid of the duplicated kernel-doc markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/9310f4074fa9d29cd3ad60684d86d0ace8dab7ae.1603791716.git.mchehab+huawei@kernel.org
The name of the argument is different, causing those warnings:
./drivers/gpu/drm/drm_edid.c:3754: warning: Function parameter or member 'video_code' not described in 'drm_display_mode_from_cea_vic'
./drivers/gpu/drm/drm_edid.c:3754: warning: Excess function parameter 'vic' description in 'drm_display_mode_from_cea_vic'
Fixes: 7af655bce2 ("drm/dp: Add drm_dp_downstream_mode()")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/7f4d6c3ff6df63ebd006eb90a5108006c23e2168.1603791716.git.mchehab+huawei@kernel.org
As warned by kernel-doc:
./drivers/gpu/drm/drm_dp_helper.c:385: warning: Function parameter or member 'type' not described in 'drm_dp_downstream_is_type'
./drivers/gpu/drm/drm_dp_helper.c:886: warning: Function parameter or member 'dev' not described in 'drm_dp_downstream_mode'
Some function parameters weren't documented.
Fixes: 38784f6f88 ("drm/dp: Add helpers to identify downstream facing port types")
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/03c9c8ba3f492aca76e2b4836803219cd9c971cf.1603791716.git.mchehab+huawei@kernel.org
A couple of more defconfig fixes to enable CONFIG_GPIO_MXC option for
i.MX ARMv4/v5 devices.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl+XYHEUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5jPwf+KkUIwf0+SPGhJGA98i9tuMFAK8ts
Xv5ml0sogJ710wjY8KqLOXBWZGbxB7hHNvlYdq2IHoDRGA1tN+qKidyR0eV+THy/
D8VOnefX6kKC3ONCP/9b2s18PZemcTcsCyyaGAT4Vi7hIiI1ALIGbx/bGVLrbLiD
JYSUM2YbsEfGTy/9fWhUaVlK+IbB6zXpVSvrY0/3gmbzJ/67vthTkuHdhlEqGmqe
Z2heEToUNOLKCB47m9OwKlXcHp6F2OxdT/i4pRTWYasccETIN3F7/VIfOud+Csyu
D6G2OfT6Zh9GS0WE6IoULMS/4QmWVkSymtTjCv+zKkJKdO/x71jy++n93w==
=Qcq+
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.10, 2nd round:
A couple of more defconfig fixes to enable CONFIG_GPIO_MXC option for
i.MX ARMv4/v5 devices.
* tag 'imx-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXC
ARM: imx_v4_v5_defconfig: Select CONFIG_GPIO_MXC
Link: https://lore.kernel.org/r/20201026235230.GL9880@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The error_debugfs label is only used when either
CONFIG_USB_DWC2_PERIPHERAL or CONFIG_USB_DWC2_DUAL_ROLE is enabled. Add
the same #if to the error_debugfs label itself as the code which uses
this label already has.
This avoids the following compiler warning:
warning: label ‘error_debugfs’ defined but not used [-Wunused-label]
Fixes: e1c08cf231 ("usb: dwc2: Add missing cleanups when usb_add_gadget_udc() fails")
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
If we want to send a control status on our own time (through
delayed_status), make sure to handle a case where we may queue the
delayed status before the host requesting for it (when XferNotReady
is generated). Otherwise, the driver won't send anything because it's
not EP0_STATUS_PHASE yet. To resolve this, regardless whether
dwc->ep0state is EP0_STATUS_PHASE, make sure to clear the
dwc->delayed_status flag if dwc3_ep0_send_delayed_status() is called.
The control status can be sent when the host requests it later.
Cc: <stable@vger.kernel.org>
Fixes: d97c78a190 ("usb: dwc3: gadget: END_TRANSFER before CLEAR_STALL command")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
clang warns about functions returning a 'const int' result:
drivers/gpu/drm/imx/imx-tve.c:487:8: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
Remove the extraneous 'const' qualifier here. I would guess that the
function was intended to be marked __attribute__((const)) instead,
but that would also be wrong since it call other functions without
that attribute.
Fixes: fcbc51e54d ("staging: drm/imx: Add support for Television Encoder (TVEv2)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The edid_len variable is never used again. Use a local variable instead
of storing it in the device structure.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Remove leftover container_of helper, it has been replaced by
bridge_to_imxpd().
Fixes: fe141cedc4 ("drm/imx: pd: Use bus format/flags provided by the bridge when available")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The edid memory is only freed if the component.unbind() is called. This
is okay if the parallel-display was bound but if the bind() fails we
leak the memory.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
[p.zabel@pengutronix.de: rebased, dropped now empty unbind()]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The edid_len variable is never used again. Use a local variable instead
of storing it in the device structure.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
__nvme_fc_terminate_io() is now called by only 1 place, in reset_work.
Consoldate and move the functionality of terminate_io into reset_work.
In reset_work, rather than calling the create_association directly,
schedule the connect work element to do its thing. After scheduling,
flush the connect work element to continue with semantic of not
returning until connect has been attempted at least once.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_fc_error_recovery() special cases handling when in CONNECTING state
and calls __nvme_fc_terminate_io(). __nvme_fc_terminate_io() itself
special cases CONNECTING state and calls the routine to abort outstanding
ios.
Simplify the sequence by putting the call to abort outstanding I/Os
directly in nvme_fc_error_recovery.
Move the location of __nvme_fc_abort_outstanding_ios(), and
nvme_fc_terminate_exchange() which is called by it, to avoid adding
function prototypes for nvme_fc_error_recovery().
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
err_work was created to handle errors (mainly I/O timeouts) while in
CONNECTING state. The flag for err_work_active is also unneeded.
Remove err_work_active and err_work. The actions to abort I/Os are moved
inline to nvme_error_recovery().
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Whenever there are errors during CONNECTING, the driver recovers by
aborting all outstanding ios and counts on the io completion to fail them
and thus the connection/association they are on. However, the connection
failure depends on a failure state from the core routines. Not all
commands that are issued by the core routine are guaranteed to cause a
failure of the core routine. They may be treated as a failure status and
the status is then ignored.
As such, whenever the transport enters error_recovery while CONNECTING,
it will set a new flag indicating an association failed. The
create_association routine which creates and initializes the controller,
will monitor the state of the flag as well as the core routine error
status and ensure the association fails if there was an error.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Receiving a zero length message leads to the following warnings because
the CQE is processed twice:
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 0 at lib/refcount.c:28
RIP: 0010:refcount_warn_saturate+0xd9/0xe0
Call Trace:
<IRQ>
nvme_rdma_recv_done+0xf3/0x280 [nvme_rdma]
__ib_process_cq+0x76/0x150 [ib_core]
...
Sanity check the received data length, to avoids this.
Thanks to Chao Leng & Sagi for suggestions.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Revalidating nvme zoned namespaces requires IO commands, and there are
controller states that prevent IO. For example, a sanitize in progress
is required to fail all IO, but we don't want to remove a namespace
we've previously added just because the controller is in such a state.
Suppress the error in this case.
Reported-by: Michael Nguyen <michael.nguyen@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
fsl_ep_fifo_status() should return error if _ep->desc is null.
Fixes: 75eaa498c9 (“usb: gadget: Correct NULL pointer checking in fsl gadget”)
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
goku_probe() goes to error label "err" and invokes goku_remove()
in case of failures of pci_enable_device(), pci_resource_start()
and ioremap(). goku_remove() gets a device from
pci_get_drvdata(pdev) and works with it without any checks, in
particular it dereferences a corresponding pointer. But
goku_probe() did not set this device yet. So, one can expect
various crashes. The patch moves setting the device just after
allocation of memory for it.
Found by Linux Driver Verification project (linuxtesting.org).
Reported-by: Pavel Andrianov <andrianov@ispras.ru>
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
There is a lot of stuff here which can be done outside of the big
opp_table_lock, do that. This helps avoiding few circular dependency
lockdeps around debugfs and interconnects.
Reported-by: Rob Clark <robdclark@gmail.com>
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Zoom UAC-2 USB audio interface provides an async playback endpoint
("1 OUT (ASYNC)") and capture endpoint ("2 IN (ASYNC)"), both with
2-channel S32_LE in 44.1, 48, 88.2, 96, 176.4, or 192
kilosamples/s. The device provides explicit feedback to adjust the
host's playback rate, but the feedback appears unstable and biased
relative to the device's capture rate.
"alsaloop -t 1000" experiences playback underruns and tries to
resample the captured audio to match the varying playback
rate. Forcing the kernel to use implicit feedback appears to
produce more stable results. This causes the host to transmit one
playback sample for each capture sample received. (Zoom North America
has been notified of this change.)
Signed-off-by: Keith Winstein <keithw@cs.stanford.edu>
Tested-by: Keith Winstein <keithw@cs.stanford.edu>
Cc: <stable@vger.kernel.org>
BugLink: https://lore.kernel.org/r/20201027071841.GA164525@trolley.csail.mit.edu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the necessary PCI ID for Intel Alder Lake-S
devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
We returned earlier by mistake even when there were no failures. Fix it.
Fixes: dd461cd918 ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.com>
The patch missed returning 0 early in case of success and hence the
static OPPs got removed by mistake. Fix it.
Fixes: 90d46d71cc ("opp: Handle multiple calls for same OPP table in _of_add_opp_table_v1()")
Reported-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dong Aisheng <aisheng.dong@nxp.com>
