The PCM subsystem in the Line6 driver is mainly used for PCM playback and
capture by ALSA, but also has other tasks, most notably providing a
low-latency software monitor for devices which don't support hardware
monitoring (e.g., the TonePort series). This patch makes ALSA "play nicely"
with the other components, i.e., prevents it from resetting the isochronous
USB transfer while other PCM tasks (software monitoring) are running.
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The .trigger() pcm callbacks are not allowed to block and cannot wait
until urbs have completed. We need to ensure that stopping, preparing,
and then restarting a stream always works.
Currently the driver will sometimes return -EBUSY when restarting the
stream because urbs have not completed yet. This can be triggered by
jackd from userspace.
The solution is to wait on urbs in the .prepare() pcm callback since
blocking is allowed in that callback. This guarantees that all urbs are
quiesced and ready to be submitted when the start trigger callback is
invoked.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The line6 driver checks struct field addresses for NULL where it does
not make sense to do so. The struct has already been checked for NULL
and there is no value in checking the first field's address too.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Playback urbs use the index_out counter to decide which part of the
playback buffer to use. Since the urb already has a unique index in
range [0, LINE6_ISO_BUFFERS) there is no need to keep a separate
counter.
Use the urb index instead. This also eliminates the possibility of two
urbs using the same playback buffer space if they ever complete
out-of-order for some reason.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The playback urb transfer buffer calculation does not factor in
LINE6_ISO_PACKETS. Buffer memory is organized like this in the driver:
Buffer 0 Buffer 1 ...
[Packet 0, Packet 1, ...][Packet 0, Packet 1, ...][Packet 0, ...]
However, we're lucky that LINE6_ISO_PACKETS is currently defined as 1 so
this patch does not change any behavior. It's still worth including
this fix in case the LINE6_ISO_PACKETS value is changed in the future.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The .hw_params() pcm callback can be invoked multiple times in a row.
Ensure that the URB data buffer is only allocated once.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch refactors the device information code and adds preliminary support for the POD HD 500 device.
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes experimental code which is no longer used.
Signed-off-by: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The obsolete function strict_strtoul should be replaced by the kstrto*
functions.
In this context kstrtou16 should be use, as midi_mask_receive is only
used as unsigned short. All corresponding datatypes were adapted
accordingly.
Signed-off-by: Andor Daam <andor.daam@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The function strict_strtoul is obsolete and should be replaced by the
new kstrto* functions.
The variable midi_mask_transmit is only used as unsigned short and the
datatypes of all affected variables were adjusted accordingly.
Signed-off-by: Andor Daam <andor.daam@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
"line6" hasn't been set at this point and we should be using
&interface->dev instead.
Gcc would have complained about this if it weren't for the fact that we
initialized line6 to NULL. I removed the initialization.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use kmemdup rather than duplicating its implementation
The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It is unsafe to free buffers in line6_pcm_stop(), which is not allowed
to sleep, since urbs cannot be killed completely there and only
unlinked. This means I/O may still be in progress and the URB
completion function still gets invoked. This may result in memory
corruption when buffer_in is freed but I/O is still pending.
Additionally, line6_pcm_start() is not supposed to sleep so it should
not use kmalloc(GFP_KERNEL).
These issues can be resolved by performing buffer allocation/freeing in
the .hw_params/.hw_free callbacks instead. The ALSA documentation also
recommends doing buffer allocation/freeing in these callbacks.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The POD HD300 isochronous endpoints have different max packet sizes for
read and write. Using the read endpoint max packet size may be too
large for the write endpoint. Instead we should use the minimum of both
endpoints to be sure the size is acceptable.
In theory we could decouple read and write packet sizes but the driver
currently uses a single size which I chose not to mess with since other
features like software monitoring may depend on a single packet size for
both endpoints.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver leaves MIDI processing up to userspace for the POD HD300
device. Add a missing case statement to skip MIDI postprocessing in the
driver. This change has no effect other than silencing a printk:
line6usb driver bug: missing case in linux/drivers/staging/line6/midi.c:179
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Pod HD device family uses new MIDI SysEx messages and therefore
cannot reuse the existing Pod code. Instead of hardcoding Pod HD MIDI
messages into the driver, leave MIDI up to userspace. This driver
simply presents MIDI and pcm ALSA devices.
This device is similar to the Pod except that it has 48 kHz audio and
does not respond to Pod SysEx messages.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If the first call to line6_midibuf_init() fails we'll leak a little
bit of memory. If the second call fails we'll leak a bit more. This
happens when we return from the function and the local variable
'line6midi' goes out of scope.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lots of drivers have in the past expected the presence of basic things
like THIS_MODULE and EXPORT_SYMBOL. With the header cleanup, they wont
have these. Call out the include explicitly.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
This seems to be the result of patches ab366c1a and 1027f476 crossing each
other. Patch ab366c1a adds calls to usb_put_intf and usb_put_dev at the
end of the function line6_probe, in the error handling code, while patch
1027f476 moves the calls to the corresponding get function from the
beginning to the end of line6_probe, making the calls to put in the error
handling code unnecessary.
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch was generated by the following semantic patch:
// <smpl>
@@ expression E; @@
- if (E != NULL) { kfree(E); }
+ kfree(E);
@@ expression E; @@
- if (E != NULL) { kfree(E); E = NULL; }
+ kfree(E);
+ E = NULL;
// </smpl>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the warning generated by sparse: "Using plain integer
as NULL pointer" by replacing the offending 0s with NULL.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
They should be writable by root, not readable.
Doh, stupid me with the wrong flags.
Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
They should not be writable by any user
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes up all of the remaining coding style issues that
make any sense to make in the line6 driver.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These symbols don't need to be exported as nothing uses them, so don't.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If error occurs line6_probe() must put interface and usbdev that were
got before.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use kmemdup when some other buffer is immediately copied into the
allocated region.
A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression from,to,size,flag;
statement S;
@@
- to = \(kmalloc\|kzalloc\)(size,flag);
+ to = kmemdup(from,size,flag);
if (to==NULL || ...) S
- memcpy(to, from, size);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to control.h that presents certain inline comments in a
neater way, and which eliminates the 80 character error found by the
checkpatch.pl tool.
Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
The id_table field of the struct usb_device_id is constant in <linux/usb.h>
so it is worth to make the initialization data also constant.
The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
struct I1 {
...
const struct I2 *x;
...
};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
struct I1 y = {
.x = E,
};
@c@
identifier r.I2;
identifier s.E;
@@
const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+ const
struct I2 E[] = ...;
// </smpl>
Signed-off-by: Németh Márton <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
