When we have multiple RPC requests queued up, it makes sense to set the
TCP_CORK option while the transmit queue is non-empty.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
After we've looked up the transport module, we need to ensure it can't
go away until we've finished running the transport setup code.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
According to RFC5666, the correct netid for an IPv6 addressed RDMA
transport is "rdma6", which we've supported as a mount option since
Linux-4.7. The problem is when we try to load the module "xprtrdma6",
that will fail, since there is no modulealias of that name.
Fixes: 181342c5eb ("xprtrdma: Add rdma6 option to support NFS/RDMA IPv6")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The original purpose of this expensive call is to prevent a long
queue of requests from blocking other work.
The cond_resched() call is unnecessary after just a single send
operation.
For longer queues, instead of invoking the kernel scheduler, simply
release the transport send lock and return to the RPC scheduler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This trace event can be used to audit transport connections from the
client.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Generate a trace event when an RPC request is queued without being
sent immediately.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Replace a dprintk() with a tracepoint. The tracepoint marks the
point where an RPC request is assigned an XID.
Additional clean up: Remove trace_xprt_enq_xmit, which reports much
the same thing. That tracepoint was added for debugging commit
918f3c1fe8 ("SUNRPC: Improve latency for interactive tasks").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
These instruments don't appear to add any substantial value.
We already have this at the termination of each RPC:
iozone-2617 [002] 975.713126: rpc_stats_latency: task:418@5 xid=0x260eab5d nfsv3 LOOKUP backlog=15 rtt=32 execute=58
iozone-2617 [002] 975.713127: xprt_release_cong: task:418@5 snd_task:4294967295 cong=256 cwnd=16384
iozone-2617 [002] 975.713127: xprt_put_cong: task:418@5 snd_task:4294967295 cong=0 cwnd=16384
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Request completion is already recorded by an "rpc_task_wakeup
queue=xprt_pending" trace record. A subsequent rpc_xdr_recvfrom
trace record shows the number of bytes received.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Current behaviour: every time a v3 operation is re-sent to the server
we update (double) the timeout. There is no distinction between whether
or not the previous timer had expired before the re-sent happened.
Here's the scenario:
1. Client sends a v3 operation
2. Server RST-s the connection (prior to the timeout) (eg., connection
is immediately reset)
3. Client re-sends a v3 operation but the timeout is now 120sec.
As a result, an application sees 2mins pause before a retry in case
server again does not reply.
Instead, this patch proposes to keep track off when the minor timeout
should happen and if it didn't, then don't update the new timeout.
Value is updated based on the previous value to make timeouts
predictable.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Refactor: Hoist create/destroy/disconnect tracepoints out of
xprtrdma and into the generic RPC client. Some benefits include:
- Enable tracing of xprt lifetime events for the socket transport
types
- Expose the different types of disconnect to help run down
issues with lingering connections
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
To help tie the recorded xdr_buf to a particular RPC transaction,
the client side version of this class should display task ID
information and the server side one should show the request's XID.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This class can be used to create trace points in either the RPC
client or RPC server paths. It simply displays the length of each
part of an xdr_buf, which is useful to determine that the transport
and XDR codecs are operating correctly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
New Features:
- New tracepoints for congestion control and Local Invalidate WRs
Bugfixes and Cleanups:
- Eliminate log noise in call_reserveresult
- Fix unstable connections after a reconnect
- Clean up some code duplication
- Close race between waking a sender and posting a receive
- Fix MR list corruption, and clean up MR usage
- Remove unused rpcrdma_sendctx fields
- Try to avoid DMA mapping pages if it is too costly
- Wake pending tasks if connection fails
- Replace some dprintk()s with tracepoints
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAl3MGSwACgkQ18tUv7Cl
QOt3LhAAz4T4DSGDb6QxUGxDRlusvHBpPFXA+GQOMRBVKiWHtrBcZT0UUybAm3Zp
i2B1gVZJSo2JeA5vg3rK0yJmGiNPs4QedTUHiRsISrKOvUo+ITAEdNXgIIB3tAM9
Pkwf0AMSqbzpUjKNHVGDGyhZ2WZM66zsDFI2CFh4Ul7VX/1NhM3xaUgTSEDJhl3z
tE+aULrwGTQvUq4JKXQ3vu4f8rsbxxNKfvaZyQIKPo79nEFdtniVn18u5p010HDP
ldJJAtY9qozhqWKwaSNEj6guW4U9wesLPrb7cBysHWjgivU17bwEbN/ZR3YrxoHI
trpBdr5994FmOCz9mcKxH+BlS0bO7QSPS2r2TpgIMjKCm8scuZlhlnMQxHV8mEpz
EpoC65qgcmqyeeOcIHnA/eN13ZAYgGKsRBIPEWRE/w+3Yz4bupsKZ/blSRzXdJpQ
forMrAGTYa64NqdnRRDxf6PMwk8fqIDeTHTybMSLghUAQi89zYK0tZpgFikwBYRJ
dqNGp4usCLtZ0c2nDnDg00arOZwqPQnxycNexHYNpHOACurCF9FhbaaZjsecZCoy
QsSFN98K6KI5ztPY1p7DL5N36IC3VDwbgi0COKtF+xB3P0pIZ/Pzwo0KbfXQF0KH
dmTrnpNY/Yq71i1ow6LTdYZ3hq7ZGztaXEEkl7udNvK97pP0UR0=
=Jlak
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-5.5-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
NFSoRDMA Client Updates for Linux 5.5
New Features:
- New tracepoints for congestion control and Local Invalidate WRs
Bugfixes and Cleanups:
- Eliminate log noise in call_reserveresult
- Fix unstable connections after a reconnect
- Clean up some code duplication
- Close race between waking a sender and posting a receive
- Fix MR list corruption, and clean up MR usage
- Remove unused rpcrdma_sendctx fields
- Try to avoid DMA mapping pages if it is too costly
- Wake pending tasks if connection fails
- Replace some dprintk()s with tracepoints
When we're destroying the host transport mechanism, we should ensure
that we do not leak memory by failing to release any back channel
slots that might still exist.
Reported-by: Neil Brown <neilb@suse.de>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
To help debug problems with RPC/RDMA credit management, replace
dprintk() call sites in the transport send lock paths with trace
events.
Similar trace points are defined for the non-congestion paths.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Stable bugfixes:
- Dequeue the request from the receive queue while we're re-encoding # v4.20+
- Fix buffer handling of GSS MIC without slack # 5.1
Features:
- Increase xprtrdma maximum transport header and slot table sizes
- Add support for nfs4_call_sync() calls using a custom rpc_task_struct
- Optimize the default readahead size
- Enable pNFS filelayout LAYOUTGET on OPEN
Other bugfixes and cleanups:
- Fix possible null-pointer dereferences and memory leaks
- Various NFS over RDMA cleanups
- Various NFS over RDMA comment updates
- Don't receive TCP data into a reset request buffer
- Don't try to parse incomplete RPC messages
- Fix congestion window race with disconnect
- Clean up pNFS return-on-close error handling
- Fixes for NFS4ERR_OLD_STATEID handling
-----BEGIN PGP SIGNATURE-----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=4Ey6
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- Dequeue the request from the receive queue while we're re-encoding
# v4.20+
- Fix buffer handling of GSS MIC without slack # 5.1
Features:
- Increase xprtrdma maximum transport header and slot table sizes
- Add support for nfs4_call_sync() calls using a custom
rpc_task_struct
- Optimize the default readahead size
- Enable pNFS filelayout LAYOUTGET on OPEN
Other bugfixes and cleanups:
- Fix possible null-pointer dereferences and memory leaks
- Various NFS over RDMA cleanups
- Various NFS over RDMA comment updates
- Don't receive TCP data into a reset request buffer
- Don't try to parse incomplete RPC messages
- Fix congestion window race with disconnect
- Clean up pNFS return-on-close error handling
- Fixes for NFS4ERR_OLD_STATEID handling"
* tag 'nfs-for-5.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (53 commits)
pNFS/filelayout: enable LAYOUTGET on OPEN
NFS: Optimise the default readahead size
NFSv4: Handle NFS4ERR_OLD_STATEID in LOCKU
NFSv4: Handle NFS4ERR_OLD_STATEID in CLOSE/OPEN_DOWNGRADE
NFSv4: Fix OPEN_DOWNGRADE error handling
pNFS: Handle NFS4ERR_OLD_STATEID on layoutreturn by bumping the state seqid
NFSv4: Add a helper to increment stateid seqids
NFSv4: Handle RPC level errors in LAYOUTRETURN
NFSv4: Handle NFS4ERR_DELAY correctly in return-on-close
NFSv4: Clean up pNFS return-on-close error handling
pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors
NFS: remove unused check for negative dentry
NFSv3: use nfs_add_or_obtain() to create and reference inodes
NFS: Refactor nfs_instantiate() for dentry referencing callers
SUNRPC: Fix congestion window race with disconnect
SUNRPC: Don't try to parse incomplete RPC messages
SUNRPC: Rename xdr_buf_read_netobj to xdr_buf_read_mic
SUNRPC: Fix buffer handling of GSS MIC without slack
SUNRPC: RPC level errors should always set task->tk_rpc_status
SUNRPC: Don't receive TCP data into a request buffer that has been reset
...
If the congestion window closes just as the transport disconnects,
a reconnect is never driven because:
1. The XPRT_CONG_WAIT flag prevents tasks from taking the write lock
2. There's no wake-up of the first task on the xprt->sending queue
To address this, clear the congestion wait flag as part of
completing a disconnect.
Fixes: 75891f502f ("SUNRPC: Support for congestion control ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that we dequeue the request from the transport receive queue
while we're re-encoding to prevent issues like use-after-free when
we release the bvec.
Fixes: 7536908982 ("SUNRPC: Ensure the bvecs are reset when we re-encode...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This reverts commit a79f194aa4.
The mechanism for aborting I/O is racy, since we are not guaranteed that
the request is asleep while we're changing both task->tk_status and
task->tk_action.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v5.1
The bvec tracks the list of pages, so if the number of pages changes
due to a re-encode, we need to reset the bvec as well.
Fixes: 277e4ab7d5 ("SUNRPC: Simplify TCP receive code by switching...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.20+
NFSoRDMA client updates for 5.3
New features:
- Add a way to place MRs back on the free list
- Reduce context switching
- Add new trace events
Bugfixes and cleanups:
- Fix a BUG when tracing is enabled with NFSv4.1
- Fix a use-after-free in rpcrdma_post_recvs
- Replace use of xdr_stream_pos in rpcrdma_marshal_req
- Fix occasional transport deadlock
- Fix show_nfs_errors macros, other tracing improvements
- Remove RPCRDMA_REQ_F_PENDING and fr_state
- Various simplifications and refactors
Adapt and apply changes that were made to the TCP socket connect
code. See the following commits for details on the purpose of
these changes:
Commit 7196dbb02e ("SUNRPC: Allow changing of the TCP timeout parameters on the fly")
Commit 3851f1cdb2 ("SUNRPC: Limit the reconnect backoff timer to the max RPC message timeout")
Commit 02910177ae ("SUNRPC: Fix reconnection timeouts")
Some common transport code is moved to xprt.c to satisfy the code
duplication police.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure last_used is updated before calling mod_timer inside
xprt_schedule_autodisconnect. This avoids a possible xprt_autoclose
firing immediately after a successful connect when xprt_unlock_connect
calls xprt_schedule_autodisconnect with an old value of last_used.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
For diagnostic purposes, it would be useful to have an rpc_iostats
metric of RPCs completing with tk_status < 0. Unfortunately,
tk_status is reset inside the rpc_call_done functions for each
operation, and the call to tally the per-op metrics comes after
rpc_call_done. Refactor the call to rpc_count_iostat earlier in
rpc_exit_task so we can count these RPCs completing in error.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Jon Hunter reports:
"I have been noticing intermittent failures with a system suspend test on
some of our machines that have a NFS mounted root file-system. Bisecting
this issue points to your commit 431235818b ("SUNRPC: Declare RPC
timers as TIMER_DEFERRABLE") and reverting this on top of v5.2-rc3 does
appear to resolve the problem.
The cause of the suspend failure appears to be a long delay observed
sometimes when resuming from suspend, and this is causing our test to
timeout."
This reverts commit 431235818b.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calculating the major timeout for a new task, when we know that the
connection has been broken, use the task->tk_start to ensure that we also
take into account the time spent waiting for a slot or session slot. This
ensures that we fail over soft requests relatively quickly once the
connection has actually been broken, and the first requests have
started to fail.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that when in the transport layer, we don't sleep past
a major timeout.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Don't wake idle CPUs only for the purpose of servicing an RPC
queue timeout.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up the RPC task sleep interfaces by replacing the task->tk_timeout
'hidden parameter' to rpc_sleep_on() with a new function that takes an
absolute timeout.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Convert the transport callback to actually put the request to sleep
instead of just setting a timeout. This is in preparation for
rpc_sleep_on_timeout().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The RPC_TASK_KILLED flag should really not be set from another context
because it can clobber data in the struct task when task->tk_flags is
changed non-atomically.
Let's therefore swap out RPC_TASK_KILLED with an atomic flag, and add
a function to set that flag and safely wake up the task.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When the socket is closed, we currently send an EAGAIN error to all
pending requests in order to ask them to retransmit. Use ENOTCONN
instead, to ensure that they try to reconnect before attempting to
transmit.
This also helps SOFTCONN tasks to behave correctly in this
situation.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If a layout segment gets invalidated while a pNFS I/O operation
is queued for transmission, then we ideally want to abort
immediately. This is particularly the case when there is a large
number of I/O related RPCs queued in the RPC layer, and the layout
segment gets invalidated due to an ENOSPC error, or an EACCES (because
the client was fenced). We may end up forced to spam the MDS with a
lot of otherwise unnecessary LAYOUTERRORs after that I/O fails.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Set memalloc_nofs_save() on all the rpciod/xprtiod jobs so that we
ensure memory allocations for asynchronous rpc calls don't ever end
up recursing back to the NFS layer for memory reclaim.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add infrastructure for trace points in the RPC_AUTH_GSS kernel
module, and add a few sample trace points. These report exceptional
or unexpected events, and observe the assignment of GSS sequence
numbers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When using Kerberos with v4.20, I've observed frequent connection
loss on heavy workloads. I traced it down to the client underrunning
the GSS sequence number window -- NFS servers are required to drop
the RPC with the low sequence number, and also drop the connection
to signal that an RPC was dropped.
Bisected to commit 918f3c1fe8 ("SUNRPC: Improve latency for
interactive tasks").
I've got a one-line workaround for this issue, which is easy to
backport to v4.20 while a more permanent solution is being derived.
Essentially, tk_owner-based sorting is disabled for RPCs that carry
a GSS sequence number.
Fixes: 918f3c1fe8 ("SUNRPC: Improve latency for interactive ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When we resend a request, ensure that the 'rq_bytes_sent' is reset
to zero.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Over the years, xprt_connect_status() has been superseded by
call_connect_status(), which now handles all the errors that
xprt_connect_status() does and more. Since the latter converts
all errors that it doesn't recognise to EIO, then it is time
for it to be retired.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
When the socket is closed, we need to call xprt_disconnect_done() in order
to clean up the XPRT_WRITE_SPACE flag, and wake up the sleeping tasks.
However, we also want to ensure that we don't wake them up before the socket
is closed, since that would cause thundering herd issues with everyone
piling up to retransmit before the TCP shutdown dance has completed.
Only the task that holds XPRT_LOCKED needs to wake up early in order to
allow the close to complete.
Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Reported-by: Scott Mayhew <smayhew@redhat.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
