Commit Graph

57935 Commits

Author SHA1 Message Date
Filipe Manana
609e804d77 Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes
When we are mixing buffered writes with direct IO writes against the same
file and snapshotting is happening concurrently, we can end up with a
corrupt file content in the snapshot. Example:

1) Inode/file is empty.

2) Snapshotting starts.

2) Buffered write at offset 0 length 256Kb. This updates the i_size of the
   inode to 256Kb, disk_i_size remains zero. This happens after the task
   doing the snapshot flushes all existing delalloc.

3) DIO write at offset 256Kb length 768Kb. Once the ordered extent
   completes it sets the inode's disk_i_size to 1Mb (256Kb + 768Kb) and
   updates the inode item in the fs tree with a size of 1Mb (which is
   the value of disk_i_size).

4) The dealloc for the range [0, 256Kb[ did not start yet.

5) The transaction used in the DIO ordered extent completion, which updated
   the inode item, is committed by the snapshotting task.

6) Snapshot creation completes.

7) Dealloc for the range [0, 256Kb[ is flushed.

After that when reading the file from the snapshot we always get zeroes for
the range [0, 256Kb[, the file has a size of 1Mb and the data written by
the direct IO write is found. From an application's point of view this is
a corruption, since in the source subvolume it could never read a version
of the file that included the data from the direct IO write without the
data from the buffered write included as well. In the snapshot's tree,
file extent items are missing for the range [0, 256Kb[.

The issue, obviously, does not happen when using the -o flushoncommit
mount option.

Fix this by flushing delalloc for all the roots that are about to be
snapshotted when committing a transaction. This guarantees total ordering
when updating the disk_i_size of an inode since the flush for dealloc is
done when a transaction is in the TRANS_STATE_COMMIT_START state and wait
is done once no more external writers exist. This is similar to what we
do when using the flushoncommit mount option, but we do it only if the
transaction has snapshots to create and only for the roots of the
subvolumes to be snapshotted. The bulk of the dealloc is flushed in the
snapshot creation ioctl, so the flush work we do inside the transaction
is minimized.

This issue, involving buffered and direct IO writes with snapshotting, is
often triggered by fstest btrfs/078, and got reported by fsck when not
using the NO_HOLES features, for example:

  $ cat results/btrfs/078.full
  (...)
  _check_btrfs_filesystem: filesystem on /dev/sdc is inconsistent
  *** fsck.btrfs output ***
  [1/7] checking root items
  [2/7] checking extents
  [3/7] checking free space cache
  [4/7] checking fs roots
  root 258 inode 264 errors 100, file extent discount
  Found file extent holes:
        start: 524288, len: 65536
  ERROR: errors found in fs roots

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-03-13 17:13:48 +01:00
Josef Bacik
2cc8334270 btrfs: remove WARN_ON in log_dir_items
When Filipe added the recursive directory logging stuff in
2f2ff0ee5e ("Btrfs: fix metadata inconsistencies after directory
fsync") he specifically didn't take the directory i_mutex for the
children directories that we need to log because of lockdep.  This is
generally fine, but can lead to this WARN_ON() tripping if we happen to
run delayed deletion's in between our first search and our second search
of dir_item/dir_indexes for this directory.  We expect this to happen,
so the WARN_ON() isn't necessary.  Drop the WARN_ON() and add a comment
so we know why this case can happen.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-03-13 17:13:32 +01:00
Filipe Manana
bf504110bc Btrfs: fix incorrect file size after shrinking truncate and fsync
If we do a shrinking truncate against an inode which is already present
in the respective log tree and then rename it, as part of logging the new
name we end up logging an inode item that reflects the old size of the
file (the one which we previously logged) and not the new smaller size.
The decision to preserve the size previously logged was added by commit
1a4bcf470c ("Btrfs: fix fsync data loss after adding hard link to
inode") in order to avoid data loss after replaying the log. However that
decision is only needed for the case the logged inode size is smaller then
the current size of the inode, as explained in that commit's change log.
If the current size of the inode is smaller then the previously logged
size, we know a shrinking truncate happened and therefore need to use
that smaller size.

Example to trigger the problem:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  $ xfs_io -f -c "pwrite -S 0xab 0 8000" /mnt/foo
  $ xfs_io -c "fsync" /mnt/foo
  $ xfs_io -c "truncate 3000" /mnt/foo

  $ mv /mnt/foo /mnt/bar
  $ xfs_io -c "fsync" /mnt/bar

  <power failure>

  $ mount /dev/sdb /mnt
  $ od -t x1 -A d /mnt/bar
  0000000 ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab
  *
  0008000

Once we rename the file, we log its name (and inode item), and because
the inode was already logged before in the current transaction, we log it
with a size of 8000 bytes because that is the size we previously logged
(with the first fsync). As part of the rename, besides logging the inode,
we do also sync the log, which is done since commit d4682ba03e
("Btrfs: sync log after logging new name"), so the next fsync against our
inode is effectively a no-op, since no new changes happened since the
rename operation. Even if did not sync the log during the rename
operation, the same problem (fize size of 8000 bytes instead of 3000
bytes) would be visible after replaying the log if the log ended up
getting synced to disk through some other means, such as for example by
fsyncing some other modified file. In the example above the fsync after
the rename operation is there just because not every filesystem may
guarantee logging/journalling the inode (and syncing the log/journal)
during the rename operation, for example it is needed for f2fs, but not
for ext4 and xfs.

Fix this scenario by, when logging a new name (which is triggered by
rename and link operations), using the current size of the inode instead
of the previously logged inode size.

A test case for fstests follows soon.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202695
CC: stable@vger.kernel.org # 4.4+
Reported-by: Seulbae Kim <seulbae@gatech.edu>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-03-13 17:13:23 +01:00
Chao Yu
aadcef64b2 f2fs: fix to avoid deadlock in f2fs_read_inline_dir()
As Jiqun Li reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=202883

sometimes, dead lock when make system call SYS_getdents64 with fsync() is
called by another process.

monkey running on android9.0

1.  task 9785 held sbi->cp_rwsem and waiting lock_page()
2.  task 10349 held mm_sem and waiting sbi->cp_rwsem
3. task 9709 held lock_page() and waiting mm_sem

so this is a dead lock scenario.

task stack is show by crash tools as following

crash_arm64> bt ffffffc03c354080
PID: 9785   TASK: ffffffc03c354080  CPU: 1   COMMAND: "RxIoScheduler-3"
>> #7 [ffffffc01b50fac0] __lock_page at ffffff80081b11e8

crash-arm64> bt 10349
PID: 10349  TASK: ffffffc018b83080  CPU: 1   COMMAND: "BUGLY_ASYNC_UPL"
>> #3 [ffffffc01f8cfa40] rwsem_down_read_failed at ffffff8008a93afc
     PC: 00000033  LR: 00000000  SP: 00000000  PSTATE: ffffffffffffffff

crash-arm64> bt 9709
PID: 9709   TASK: ffffffc03e7f3080  CPU: 1   COMMAND: "IntentService[A"
>> #3 [ffffffc001e67850] rwsem_down_read_failed at ffffff8008a93afc
>> #8 [ffffffc001e67b80] el1_ia at ffffff8008084fc4
     PC: ffffff8008274114  [compat_filldir64+120]
     LR: ffffff80083584d4  [f2fs_fill_dentries+448]
     SP: ffffffc001e67b80  PSTATE: 80400145
    X29: ffffffc001e67b80  X28: 0000000000000000  X27: 000000000000001a
    X26: 00000000000093d7  X25: ffffffc070d52480  X24: 0000000000000008
    X23: 0000000000000028  X22: 00000000d43dfd60  X21: ffffffc001e67e90
    X20: 0000000000000011  X19: ffffff80093a4000  X18: 0000000000000000
    X17: 0000000000000000  X16: 0000000000000000  X15: 0000000000000000
    X14: ffffffffffffffff  X13: 0000000000000008  X12: 0101010101010101
    X11: 7f7f7f7f7f7f7f7f  X10: 6a6a6a6a6a6a6a6a   X9: 7f7f7f7f7f7f7f7f
     X8: 0000000080808000   X7: ffffff800827409c   X6: 0000000080808000
     X5: 0000000000000008   X4: 00000000000093d7   X3: 000000000000001a
     X2: 0000000000000011   X1: ffffffc070d52480   X0: 0000000000800238
>> #9 [ffffffc001e67be0] f2fs_fill_dentries at ffffff80083584d0
     PC: 0000003c  LR: 00000000  SP: 00000000  PSTATE: 000000d9
    X12: f48a02ff X11: d4678960 X10: d43dfc00  X9: d4678ae4
     X8: 00000058  X7: d4678994  X6: d43de800  X5: 000000d9
     X4: d43dfc0c  X3: d43dfc10  X2: d46799c8  X1: 00000000
     X0: 00001068

Below potential deadlock will happen between three threads:
Thread A		Thread B		Thread C
- f2fs_do_sync_file
 - f2fs_write_checkpoint
  - down_write(&sbi->node_change) -- 1)
			- do_page_fault
			 - down_write(&mm->mmap_sem) -- 2)
			  - do_wp_page
			   - f2fs_vm_page_mkwrite
						- getdents64
						 - f2fs_read_inline_dir
						  - lock_page -- 3)
  - f2fs_sync_node_pages
   - lock_page -- 3)
			    - __do_map_lock
			     - down_read(&sbi->node_change) -- 1)
						  - f2fs_fill_dentries
						   - dir_emit
						    - compat_filldir64
						     - do_page_fault
						      - down_read(&mm->mmap_sem) -- 2)

Since f2fs_readdir is protected by inode.i_rwsem, there should not be
any updates in inode page, we're safe to lookup dents in inode page
without its lock held, so taking off the lock to improve concurrency
of readdir and avoid potential deadlock.

Reported-by: Jiqun Li <jiqun.li@unisoc.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 19:07:09 -07:00
Chao Yu
2c28aba8b2 f2fs: fix to adapt small inline xattr space in __find_inline_xattr()
With below testcase, we will fail to find existed xattr entry:

1. mkfs.f2fs -O extra_attr -O flexible_inline_xattr /dev/zram0
2. mount -t f2fs -o inline_xattr_size=1 /dev/zram0 /mnt/f2fs/
3. touch /mnt/f2fs/file
4. setfattr -n "user.name" -v 0 /mnt/f2fs/file
5. getfattr -n "user.name" /mnt/f2fs/file

/mnt/f2fs/file: user.name: No such attribute

The reason is for inode which has very small inline xattr size,
__find_inline_xattr() will fail to traverse any entry due to first
entry may not be loaded from xattr node yet, later, we may skip to
check entire xattr datas in __find_xattr(), result in such wrong
condition.

This patch adds condition to check such case to avoid this issue.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 19:02:26 -07:00
Chao Yu
dd6c89b5f2 f2fs: fix to do sanity check with inode.i_inline_xattr_size
As Paul Bandha reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=202709

When I run the poc on the mounted f2fs img I get a buffer overflow in
read_inline_xattr due to there being no sanity check on the value of
i_inline_xattr_size.

I created the img by just modifying the value of i_inline_xattr_size
in the inode:

i_name                        		[test1.txt]
i_ext: fofs:0 blkaddr:0 len:0
i_extra_isize                 		[0x      18 : 24]
i_inline_xattr_size           		[0x    ffff : 65535]
i_addr[ofs]                   		[0x       0 : 0]

mkdir /mnt/f2fs
mount ./f2fs1.img /mnt/f2fs
gcc poc.c -o poc
./poc

int main() {
	int y = syscall(SYS_listxattr, "/mnt/f2fs/test1.txt", NULL, 0);
	printf("ret %d", y);
	printf("errno: %d\n", errno);

}

 BUG: KASAN: slab-out-of-bounds in read_inline_xattr+0x18f/0x260
 Read of size 262140 at addr ffff88011035efd8 by task f2fs1poc/3263

 CPU: 0 PID: 3263 Comm: f2fs1poc Not tainted 4.18.0-custom #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014
 Call Trace:
  dump_stack+0x71/0xab
  print_address_description+0x83/0x250
  kasan_report+0x213/0x350
  memcpy+0x1f/0x50
  read_inline_xattr+0x18f/0x260
  read_all_xattrs+0xba/0x190
  f2fs_listxattr+0x9d/0x3f0
  listxattr+0xb2/0xd0
  path_listxattr+0x93/0xe0
  do_syscall_64+0x9d/0x220
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Let's add sanity check for inode.i_inline_xattr_size during f2fs_iget()
to avoid this issue.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 19:02:26 -07:00
Jaegeuk Kim
70db5b04cb f2fs: give some messages for inline_xattr_size
This patch adds some kernel messages when user sets wrong inline_xattr_size.

Fixes: 500e0b28ec ("f2fs: fix to check inline_xattr_size boundary correctly")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 19:02:21 -07:00
Chao Yu
86109c9064 f2fs: don't trigger read IO for beyond EOF page
In f2fs_mpage_readpages(), if page is beyond EOF, we should just
zero out it, but previously, before checking previous mapping
info, we missed to check filesize boundary, fix it.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 18:59:19 -07:00
Chao Yu
240a59156d f2fs: fix to add refcount once page is tagged PG_private
As Gao Xiang reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=202749

f2fs may skip pageout() due to incorrect page reference count.

The problem here is that MM defined the rule [1] very clearly that
once page was set with PG_private flag, we should increment the
refcount in that page, also main flows like pageout(), migrate_page()
will assume there is one additional page reference count if
page_has_private() returns true.

But currently, f2fs won't add/del refcount when changing PG_private
flag. Anyway, f2fs should follow MM's rule to make MM's related flows
running as expected.

[1] https://lore.kernel.org/lkml/2b19b3c4-2bc4-15fa-15cc-27a13e5c7af1@aol.com/

Reported-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 18:59:19 -07:00
Chao Yu
25720cc05e f2fs: remove wrong comment in f2fs_invalidate_page()
Since 8c242db9b8 ("f2fs: fix stale ATOMIC_WRITTEN_PAGE private pointer"),
we've started to not skip clear private flag for atomic_write page
truncation, so removing old wrong comment in f2fs_invalidate_page().

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 18:59:19 -07:00
Chao Yu
2a6a7e722e f2fs: fix to use kvfree instead of kzfree
As Jiqun Li reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=202747

System can panic due to using wrong allocate/free function pair
in xattr interface:
- use kvmalloc to allocate memory
- use kzfree to free memory

Let's fix to use kvfree instead of kzfree, BTW, we are safe to
get rid of kzfree, since there is no such confidential data stored
as xattr, we don't need to zero it before free memory.

Fixes: 5222595d09 ("f2fs: use kvmalloc, if kmalloc is failed")
Reported-by: Jiqun Li <jiqun.li@unisoc.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 18:59:19 -07:00
Chao Yu
559e87c497 f2fs: trace f2fs_ioc_shutdown
This patch supports to trace f2fs_ioc_shutdown.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 18:59:19 -07:00
Chao Yu
48432984d7 f2fs: fix to avoid deadlock of atomic file operations
Thread A				Thread B
- __fput
 - f2fs_release_file
  - drop_inmem_pages
   - mutex_lock(&fi->inmem_lock)
   - __revoke_inmem_pages
    - lock_page(page)
					- open
					- f2fs_setattr
					- truncate_setsize
					 - truncate_inode_pages_range
					  - lock_page(page)
					  - truncate_cleanup_page
					   - f2fs_invalidate_page
					    - drop_inmem_page
					    - mutex_lock(&fi->inmem_lock);

We may encounter above ABBA deadlock as reported by Kyungtae Kim:

I'm reporting a bug in linux-4.17.19: "INFO: task hung in
drop_inmem_page" (no reproducer)

I think this might be somehow related to the following:
https://groups.google.com/forum/#!searchin/syzkaller-bugs/INFO$3A$20task$20hung$20in$20%7Csort:date/syzkaller-bugs/c6soBTrdaIo/AjAzPeIzCgAJ

=========================================
INFO: task syz-executor7:10822 blocked for more than 120 seconds.
      Not tainted 4.17.19 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syz-executor7   D27024 10822   6346 0x00000004
Call Trace:
 context_switch kernel/sched/core.c:2867 [inline]
 __schedule+0x721/0x1e60 kernel/sched/core.c:3515
 schedule+0x88/0x1c0 kernel/sched/core.c:3559
 schedule_preempt_disabled+0x18/0x30 kernel/sched/core.c:3617
 __mutex_lock_common kernel/locking/mutex.c:833 [inline]
 __mutex_lock+0x5bd/0x1410 kernel/locking/mutex.c:893
 mutex_lock_nested+0x1b/0x20 kernel/locking/mutex.c:908
 drop_inmem_page+0xcb/0x810 fs/f2fs/segment.c:327
 f2fs_invalidate_page+0x337/0x5e0 fs/f2fs/data.c:2401
 do_invalidatepage mm/truncate.c:165 [inline]
 truncate_cleanup_page+0x261/0x330 mm/truncate.c:187
 truncate_inode_pages_range+0x552/0x1610 mm/truncate.c:367
 truncate_inode_pages mm/truncate.c:478 [inline]
 truncate_pagecache+0x6d/0x90 mm/truncate.c:801
 truncate_setsize+0x81/0xa0 mm/truncate.c:826
 f2fs_setattr+0x44f/0x1270 fs/f2fs/file.c:781
 notify_change+0xa62/0xe80 fs/attr.c:313
 do_truncate+0x12e/0x1e0 fs/open.c:63
 do_last fs/namei.c:2955 [inline]
 path_openat+0x2042/0x29f0 fs/namei.c:3505
 do_filp_open+0x1bd/0x2c0 fs/namei.c:3540
 do_sys_open+0x35e/0x4e0 fs/open.c:1101
 __do_sys_open fs/open.c:1119 [inline]
 __se_sys_open fs/open.c:1114 [inline]
 __x64_sys_open+0x89/0xc0 fs/open.c:1114
 do_syscall_64+0xc4/0x4e0 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4497b9
RSP: 002b:00007f734e459c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000002
RAX: ffffffffffffffda RBX: 00007f734e45a6cc RCX: 00000000004497b9
RDX: 0000000000000104 RSI: 00000000000a8280 RDI: 0000000020000080
RBP: 000000000071bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000007230 R14: 00000000006f02d0 R15: 00007f734e45a700
INFO: task syz-executor7:10858 blocked for more than 120 seconds.
      Not tainted 4.17.19 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syz-executor7   D28880 10858   6346 0x00000004
Call Trace:
 context_switch kernel/sched/core.c:2867 [inline]
 __schedule+0x721/0x1e60 kernel/sched/core.c:3515
 schedule+0x88/0x1c0 kernel/sched/core.c:3559
 __rwsem_down_write_failed_common kernel/locking/rwsem-xadd.c:565 [inline]
 rwsem_down_write_failed+0x5e6/0xc90 kernel/locking/rwsem-xadd.c:594
 call_rwsem_down_write_failed+0x17/0x30 arch/x86/lib/rwsem.S:117
 __down_write arch/x86/include/asm/rwsem.h:142 [inline]
 down_write+0x58/0xa0 kernel/locking/rwsem.c:72
 inode_lock include/linux/fs.h:713 [inline]
 do_truncate+0x120/0x1e0 fs/open.c:61
 do_last fs/namei.c:2955 [inline]
 path_openat+0x2042/0x29f0 fs/namei.c:3505
 do_filp_open+0x1bd/0x2c0 fs/namei.c:3540
 do_sys_open+0x35e/0x4e0 fs/open.c:1101
 __do_sys_open fs/open.c:1119 [inline]
 __se_sys_open fs/open.c:1114 [inline]
 __x64_sys_open+0x89/0xc0 fs/open.c:1114
 do_syscall_64+0xc4/0x4e0 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4497b9
RSP: 002b:00007f734e3b4c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000002
RAX: ffffffffffffffda RBX: 00007f734e3b56cc RCX: 00000000004497b9
RDX: 0000000000000104 RSI: 00000000000a8280 RDI: 0000000020000080
RBP: 000000000071c238 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000007230 R14: 00000000006f02d0 R15: 00007f734e3b5700
INFO: task syz-executor5:10829 blocked for more than 120 seconds.
      Not tainted 4.17.19 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syz-executor5   D28760 10829   6308 0x80000002
Call Trace:
 context_switch kernel/sched/core.c:2867 [inline]
 __schedule+0x721/0x1e60 kernel/sched/core.c:3515
 schedule+0x88/0x1c0 kernel/sched/core.c:3559
 io_schedule+0x21/0x80 kernel/sched/core.c:5179
 wait_on_page_bit_common mm/filemap.c:1100 [inline]
 __lock_page+0x2b5/0x390 mm/filemap.c:1273
 lock_page include/linux/pagemap.h:483 [inline]
 __revoke_inmem_pages+0xb35/0x11c0 fs/f2fs/segment.c:231
 drop_inmem_pages+0xa3/0x3e0 fs/f2fs/segment.c:306
 f2fs_release_file+0x2c7/0x330 fs/f2fs/file.c:1556
 __fput+0x2c7/0x780 fs/file_table.c:209
 ____fput+0x1a/0x20 fs/file_table.c:243
 task_work_run+0x151/0x1d0 kernel/task_work.c:113
 exit_task_work include/linux/task_work.h:22 [inline]
 do_exit+0x8ba/0x30a0 kernel/exit.c:865
 do_group_exit+0x13b/0x3a0 kernel/exit.c:968
 get_signal+0x6bb/0x1650 kernel/signal.c:2482
 do_signal+0x84/0x1b70 arch/x86/kernel/signal.c:810
 exit_to_usermode_loop+0x155/0x190 arch/x86/entry/common.c:162
 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:265 [inline]
 do_syscall_64+0x445/0x4e0 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4497b9
RSP: 002b:00007f1c68e74ce8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 000000000071bf80 RCX: 00000000004497b9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000071bf80
RBP: 000000000071bf80 R08: 0000000000000000 R09: 000000000071bf58
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f1c68e759c0 R15: 00007f1c68e75700

This patch tries to use trylock_page to mitigate such deadlock condition
for fix.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 18:59:19 -07:00
Chao Yu
ca597bdded f2fs: fix to dirty inode for i_mode recovery
As Seulbae Kim reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=202637

We didn't recover permission field correctly after sudden power-cut,
the reason is in setattr we didn't add inode into global dirty list
once i_mode is changed, so latter checkpoint triggered by fsync will
not flush last i_mode into disk, result in this problem, fix it.

Reported-by: Seulbae Kim <seulbae@gatech.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 18:59:18 -07:00
Jaegeuk Kim
428e3bcf07 f2fs: give random value to i_generation
This follows to give random number to i_generation along with commit
2325306802 ("ext4: improve smp scalability for inode generation")

This can be used for DUN for UFS HW encryption.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 18:59:18 -07:00
Gao Xiang
613f3dcdf0 f2fs: no need to take page lock in readdir
VFS will take inode_lock for readdir, therefore no need to
take page lock in readdir at all just as the majority of
other generic filesystems.

This patch improves concurrency since .iterate_shared
was introduced to VFS years ago.

Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 18:59:18 -07:00
Chao Yu
e46f6bd82c f2fs: fix to update iostat correctly in IPU path
In error path of IPU, we didn't account iostat correctly, fix it.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 18:59:18 -07:00
Chao Yu
6492a335fd f2fs: fix encrypted page memory leak
For IPU path of f2fs_do_write_data_page(), in its error path, we
need to release encrypted page and fscrypt context, otherwise it
will cause memory leak.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 18:59:18 -07:00
Chao Yu
dc37910d4c f2fs: make fault injection covering __submit_flush_wait()
This patch changes to allow failure of f2fs_bio_alloc() in
__submit_flush_wait(), which can simulate flush error in checkpoint()
for covering more error paths.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 18:59:18 -07:00
Chao Yu
aa2c8c43e4 f2fs: fix to retry fill_super only if recovery failed
With current retry mechanism in f2fs_fill_super, first fill_super
fails due to no memory, then second fill_super runs w/o recovery,
if we succeed, we may lose fsynced data, it doesn't make sense.

Let's retry fill_super only if it occurs non-ENOMEM error during
recovery.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 18:59:17 -07:00
Gao Xiang
bc73a4b241 f2fs: silence VM_WARN_ON_ONCE in mempool_alloc
Note that __GFP_ZERO is not supported for mempool_alloc,
which also documented in the mempool_alloc comments.

Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 18:59:17 -07:00
Jaegeuk Kim
0af725fcb7 f2fs: fix wrong #endif
We have to cover whole headerfile with last #endif.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-12 18:59:11 -07:00
Linus Torvalds
ebc551f2b8 Miscellaneous NFS server fixes. Probably the most visible bug is one
that could artificially limit NFSv4.1 performance by limiting the number
 of oustanding rpcs from a single client.  Neil Brown also gets a special
 mention for fixing a 14.5-year-old memory-corruption bug in the encoding
 of NFSv3 readdir responses.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJch/d7AAoJECebzXlCjuG+VzkP/0AlSz0+vC/65oyqxAtvsn4z
 xxp6p+PcjuP7NhbImA9zO0d27rpkVFiY0vIArbcwI4R/PsqjRu8kW+dYzK2QAkY2
 pzlV2aXxB9es16Vit5M+rvM4nwSsiYdnmN7kd4ntr8DKxtzePoCSL0/kGnbVE8tt
 bnI5VhbWdd2kekR8xjRFhbHEQm2X6238K4Rv0wRc2o117GSBZCaHh7sgAdZ8BfFt
 lJET9iOGagrusVWP0Cy6+Jomg0SzyPjcwn6WuBM7MRyn9Viso+ZEOkvnxVtlX+uZ
 Z4GjbfAxC+7PKajovEW+/zIOjFgHYwNpQEsqGWAALsXXRj9vLgb0+a1DRWFCAj5n
 KkWxPMcqqxpinhluLjw+r8U90KaA3DqewJdmmSol0IjM+mvVjhUuzhvCaMOhTxJM
 WG3YZKhZzurQyp+q79xl2MycZ1QWDEDfEf7LD7MAfL88MSVbmYTM/744B4A61LZ4
 Ap9p8Jy5LeT6SgSWUh9QBxMIrab4dY0L4xUs0e0s9VE62oS3R62BojTzXSXcztNI
 UPwabKhQHnsNMAZoPlMoG5UjtCFcTHM24+NDYveWyi55dBwDq8q0FnAlKSevE1pi
 BC3WtWtnLeL1YgAMH7TLjpTUcl6jVZLHuvELW/2Lz5o0zyo8qlgF3sC7eOtGNB4j
 LQYmnf67aG+dGvZ91YPc
 =ntUa
 -----END PGP SIGNATURE-----

Merge tag 'nfsd-5.1' of git://linux-nfs.org/~bfields/linux

Pull NFS server updates from Bruce Fields:
 "Miscellaneous NFS server fixes.

  Probably the most visible bug is one that could artificially limit
  NFSv4.1 performance by limiting the number of oustanding rpcs from a
  single client.

  Neil Brown also gets a special mention for fixing a 14.5-year-old
  memory-corruption bug in the encoding of NFSv3 readdir responses"

* tag 'nfsd-5.1' of git://linux-nfs.org/~bfields/linux:
  nfsd: allow nfsv3 readdir request to be larger.
  nfsd: fix wrong check in write_v4_end_grace()
  nfsd: fix memory corruption caused by readdir
  nfsd: fix performance-limiting session calculation
  svcrpc: fix UDP on servers with lots of threads
  svcrdma: Remove syslog warnings in work completion handlers
  svcrdma: Squelch compiler warning when SUNRPC_DEBUG is disabled
  svcrdma: Use struct_size() in kmalloc()
  svcrpc: fix unlikely races preventing queueing of sockets
  svcrpc: svc_xprt_has_something_to_do seems a little long
  SUNRPC: Don't allow compiler optimisation of svc_xprt_release_slot()
  nfsd: fix an IS_ERR() vs NULL check
2019-03-12 15:06:54 -07:00
Linus Torvalds
a5adcfcad5 A large number of bug fixes and cleanups. One new feature to allow
users to more easily find the jbd2 journal thread for a particular
 ext4 file system.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlx8utQACgkQ8vlZVpUN
 gaOMOQf+Olp6hTbCuPJNill7npEejkPu9VhNvLPp3dLPBfsyqG9IOZmUaKKtr3LS
 ZYYzMMoIlbHDsWM70O92zDS3s1ThKRFoDdcw4YKXkn1Awlqc4LRZ/NnzyIIdA3mK
 rhOvcr6ttWk2B2S67nGceTH08SX5zACMtMiQijP58+GCp4Xe+PdqPRRjYYJSOZMv
 xCS43LoWY0tkeBTQuk9WYTi6G/E1X/aiq06pYiQzP69PotN6/cFSdNgP1r+7dYiS
 V4IXPqEqFt8NvUZb1bJchT3+2zM3Xi/+n//7yLkpY7OhX6p1p24oB7abMstp3ssU
 BlF8KP4elQcI892QX2Hf+0r4tBu+0w==
 =2yLu
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "A large number of bug fixes and cleanups.

  One new feature to allow users to more easily find the jbd2 journal
  thread for a particular ext4 file system"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
  jbd2: jbd2_get_transaction does not need to return a value
  jbd2: fix invalid descriptor block checksum
  ext4: fix bigalloc cluster freeing when hole punching under load
  ext4: add sysfs attr /sys/fs/ext4/<disk>/journal_task
  ext4: Change debugging support help prefix from EXT4 to Ext4
  ext4: fix compile error when using BUFFER_TRACE
  jbd2: fix compile warning when using JBUFFER_TRACE
  ext4: fix some error pointer dereferences
  ext4: annotate more implicit fall throughs
  ext4: annotate implicit fall throughs
  ext4: don't update s_rev_level if not required
  jbd2: fold jbd2_superblock_csum_{verify,set} into their callers
  jbd2: fix race when writing superblock
  ext4: fix crash during online resizing
  ext4: disallow files with EXT4_JOURNAL_DATA_FL from EXT4_IOC_SWAP_BOOT
  ext4: add mask of ext4 flags to swap
  ext4: update quota information while swapping boot loader inode
  ext4: cleanup pagecache before swap i_data
  ext4: fix check of inode in swap_inode_boot_loader
  ext4: unlock unused_pages timely when doing writeback
  ...
2019-03-12 15:03:21 -07:00
Linus Torvalds
2b0a80b0d0 The highlights are:
- rbd will now ignore discards that aren't aligned and big enough to
   actually free up some space (myself).  This is controlled by the new
   alloc_size map option and can be disabled if needed.
 
 - support for rbd deep-flatten feature (myself).  Deep-flatten allows
   "rbd flatten" to fully disconnect the clone image and its snapshots
   from the parent and make the parent snapshot removable.
 
 - a new round of cap handling improvements (Zheng Yan).  The kernel
   client should now be much more prompt about releasing its caps and
   it is possible to put a limit on the number of caps held.
 
 - support for getting ceph.dir.pin extended attribute (Zheng Yan)
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlyH5LUTHGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzi9cCCACb8PiX+PZWuwboAmO66TIQGT8VgEer
 /K3zU6UsmnKHldk/gyjK+ESIxX64zP9HrNGTDxlDKZTB52GDiAYbhcBnskMtrtgl
 EFLweTRs6XiHI1yV3qmElyPz0eLnWBXLUW6RDoyHxGUPWuGk9Mp4Of+PSkl2aO/9
 j4eBQj7FYB6XAuzwFKltFq3uKb+jODDrW7VRDDTMEYGPHZOU6EXXUEUOrAtAreiU
 j9wHF2AZ61WdVjzzXF/tBHJIwGGZj8102Af4ra/UMuHmtGZag6n0eY6uzGXluY2o
 uGPuhFHMExsqjhCCPHtayWJW7WG0pQKKuwT8Ucw/KPBJ6Ok3Z2tG27/8
 =sQNQ
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-5.1-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "The highlights are:

   - rbd will now ignore discards that aren't aligned and big enough to
     actually free up some space (myself). This is controlled by the new
     alloc_size map option and can be disabled if needed.

   - support for rbd deep-flatten feature (myself). Deep-flatten allows
     "rbd flatten" to fully disconnect the clone image and its snapshots
     from the parent and make the parent snapshot removable.

   - a new round of cap handling improvements (Zheng Yan). The kernel
     client should now be much more prompt about releasing its caps and
     it is possible to put a limit on the number of caps held.

   - support for getting ceph.dir.pin extended attribute (Zheng Yan)"

* tag 'ceph-for-5.1-rc1' of git://github.com/ceph/ceph-client: (26 commits)
  Documentation: modern versions of ceph are not backed by btrfs
  rbd: advertise support for RBD_FEATURE_DEEP_FLATTEN
  rbd: whole-object write and zeroout should copyup when snapshots exist
  rbd: copyup with an empty snapshot context (aka deep-copyup)
  rbd: introduce rbd_obj_issue_copyup_ops()
  rbd: stop copying num_osd_ops in rbd_obj_issue_copyup()
  rbd: factor out __rbd_osd_req_create()
  rbd: clear ->xferred on error from rbd_obj_issue_copyup()
  rbd: remove experimental designation from kernel layering
  ceph: add mount option to limit caps count
  ceph: periodically trim stale dentries
  ceph: delete stale dentry when last reference is dropped
  ceph: remove dentry_lru file from debugfs
  ceph: touch existing cap when handling reply
  ceph: pass inclusive lend parameter to filemap_write_and_wait_range()
  rbd: round off and ignore discards that are too small
  rbd: handle DISCARD and WRITE_ZEROES separately
  rbd: get rid of obj_req->obj_request_count
  libceph: use struct_size() for kmalloc() in crush_decode()
  ceph: send cap releases more aggressively
  ...
2019-03-12 14:58:35 -07:00
Linus Torvalds
92825b0298 for-5.1-part2-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAlyHwgcACgkQxWXV+ddt
 WDvfFQ//VBO8Rnz0+V4XbxaIaz25EbCjR4cBuXwwXyl8HPJMZBvBPqW0LVXtV0eP
 SwK0A5qiWqaXgWNpByD43AvgizZuWF/9SvxebaCKTjSK5t9TuXpR27vJNnHJf0L0
 o4DeMXlgd8yE8yZstQo7UnLWfNU69v6Pi3Zbar/7IIJ0sVVCPMMoGoARZDlQ+w0M
 wwppi04+a6bnAUbqpnWiL0a8++WX6gqP7MovqLRgf/up4cmzmDFoV7b/7pbvZxNv
 LrKQBmJZQq44bW4TXMzhpkrIGyzrrUQuBhpbYJus9yZYqS6Owkzl5AQpdzo9reg2
 V35xOkOZbXxqdOTGY0he9Z6wxJL+ocfryfRyA2hE4gXbCAnfFqIRyFicpTXuXxwg
 RBan8VLB+1iC7j9djX/sP/uCH3tsPgN4WnjdZgnkUOkUhTuvpPw/A9bp6Uqfjr6g
 JU0o/TlCC8npaveUQsuNbqyVYgPk58d9by12HsSW7UaA8ENyHz62+zoiv9jX/uZY
 Tl4t2L+MKxEcsd0KEKEQpV+0hV56GtYcIZIqJTe9WFmPBHmEH3PCHDx4A5LrYveO
 hC+hGAnX9xWK4XIr8T3ck1tsnxNApD25pmKSivadUiVJqOrPpJFyZb3aztcKcx4Y
 sDbZdOV7XHq6ACrIhLoxpYWQc27v1FqrWVqsF51wo07I3meUVaA=
 =u4Kf
 -----END PGP SIGNATURE-----

Merge tag 'for-5.1-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "Correctness and a deadlock fixes"

* tag 'for-5.1-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zstd: ensure reclaim timer is properly cleaned up
  btrfs: move ulist allocation out of transaction in quota enable
  btrfs: save drop_progress if we drop refs at all
  btrfs: check for refs on snapshot delete resume
  Btrfs: fix deadlock between clone/dedupe and rename
  Btrfs: fix corruption reading shared and compressed extents after hole punching
2019-03-12 14:53:57 -07:00
Linus Torvalds
1fbf3e4812 NFS client updates for Linux 5.1
Highlights include:
 
 Stable fixes:
 - Fixes for NFS I/O request leakages
 - Fix error handling paths in the NFS I/O recoalescing code
 - Reinitialise NFSv4.1 sequence results before retransmitting a request
 - Fix a soft lockup in the delegation recovery code
 - Bulk destroy of layouts needs to be safe w.r.t. umount
 - Prevent thundering herd issues when the SUNRPC socket is not connected
 - Respect RPC call timeouts when retrying transmission
 
 Features:
 - Convert rpc auth layer to use xdr_streams
 - Config option to disable insecure RPCSEC_GSS crypto types
 - Reduce size of RPC receive buffers
 - Readdirplus optimization by cache mechanism
 - Convert SUNRPC socket send code to use iov_iter()
 - SUNRPC micro-optimisations to avoid indirect calls
 - Add support for the pNFS LAYOUTERROR operation and use it with the
   pNFS/flexfiles driver
 - Add trace events to report non-zero NFS status codes
 - Various removals of unnecessary dprintks
 
 Bugfixes and cleanups:
 - Fix a number of sparse warnings and documentation format warnings
 - Fix nfs_parse_devname to not modify it's argument
 - Fix potential corruption of page being written through pNFS/blocks
 - fix xfstest generic/099 failures on nfsv3
 - Avoid NFSv4.1 "false retries" when RPC calls are interrupted
 - Abort I/O early if the pNFS/flexfiles layout segment was invalidated
 - Avoid unnecessary pNFS/flexfiles layout invalidations
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJch5pDAAoJEA4mA3inWBJc8YcP/1/eyUfdkJ/OGDgXkPcgvDWd
 PzzfRuB6QdJnNCd+OIcdHMA/5v1QP+V1ubwBEIGhnbA5S5RZBaKaZR/UHMhfiqjn
 NJTFjYxE/2fqqOCqSoEEGD8or6fbxfLycfxpHo7xLjD95Hs9o4BeWDOULG3/X2v+
 ETu/wganWoUeVsMfyfeCk8FarMFoEiODcEn+iNHYz75GlmeE/BsqsjdIjO3FWUZP
 d0SoE7g6RtMF8NumXiP17cNFslWbvI6f1FKDRt8Cf3pDxpuLcHsRXYOEEEpBpKHS
 NbNKeUR9IBekUOMGp/LXF9jCaaJITq0k127NkZoVSQyaVsNQL0vM55awEQryOxkL
 Fsxi/u0y05EGtlvO+t4qhO4MJ5SywjJjepib1EyABK3/3lT9IjEW7iCGGap+DKd3
 im4Cx0bFi6wKiEmOeRpkrt72qPC9l6fySnEVnnGILFVovhCBdKftLicqfQPIo2CB
 MsUODROT4H2YklUsWJB55kjL4CgVRGFC+Nx8R6ZXi8DjO8HBfOf05RNI7tBnd/un
 /YYkJxLJR9RRqkyTbJd5nddM3FSgMBc6k5ptHDhpCIzN0Inf4U5Z7FFkRUzM2eTc
 DWFifcro9lrbaIhEMQJMIVfxHQccK0FrOU1MBbX0MY52RzHnRC0XyIm/3WDPqLzb
 43tZY1orRnTFDeIF5jSs
 =9rH/
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-5.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable fixes:
   - Fixes for NFS I/O request leakages
   - Fix error handling paths in the NFS I/O recoalescing code
   - Reinitialise NFSv4.1 sequence results before retransmitting a
     request
   - Fix a soft lockup in the delegation recovery code
   - Bulk destroy of layouts needs to be safe w.r.t. umount
   - Prevent thundering herd issues when the SUNRPC socket is not
     connected
   - Respect RPC call timeouts when retrying transmission

  Features:
   - Convert rpc auth layer to use xdr_streams
   - Config option to disable insecure RPCSEC_GSS crypto types
   - Reduce size of RPC receive buffers
   - Readdirplus optimization by cache mechanism
   - Convert SUNRPC socket send code to use iov_iter()
   - SUNRPC micro-optimisations to avoid indirect calls
   - Add support for the pNFS LAYOUTERROR operation and use it with the
     pNFS/flexfiles driver
   - Add trace events to report non-zero NFS status codes
   - Various removals of unnecessary dprintks

  Bugfixes and cleanups:
   - Fix a number of sparse warnings and documentation format warnings
   - Fix nfs_parse_devname to not modify it's argument
   - Fix potential corruption of page being written through pNFS/blocks
   - fix xfstest generic/099 failures on nfsv3
   - Avoid NFSv4.1 "false retries" when RPC calls are interrupted
   - Abort I/O early if the pNFS/flexfiles layout segment was
     invalidated
   - Avoid unnecessary pNFS/flexfiles layout invalidations"

* tag 'nfs-for-5.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (90 commits)
  SUNRPC: Take the transport send lock before binding+connecting
  SUNRPC: Micro-optimise when the task is known not to be sleeping
  SUNRPC: Check whether the task was transmitted before rebind/reconnect
  SUNRPC: Remove redundant calls to RPC_IS_QUEUED()
  SUNRPC: Clean up
  SUNRPC: Respect RPC call timeouts when retrying transmission
  SUNRPC: Fix up RPC back channel transmission
  SUNRPC: Prevent thundering herd when the socket is not connected
  SUNRPC: Allow dynamic allocation of back channel slots
  NFSv4.1: Bump the default callback session slot count to 16
  SUNRPC: Convert remaining GFP_NOIO, and GFP_NOWAIT sites in sunrpc
  NFS/flexfiles: Clean up mirror DS initialisation
  NFS/flexfiles: Remove dead code in ff_layout_mirror_valid()
  NFS/flexfile: Simplify nfs4_ff_layout_select_ds_stateid()
  NFS/flexfile: Simplify nfs4_ff_layout_ds_version()
  NFS/flexfiles: Simplify ff_layout_get_ds_cred()
  NFS/flexfiles: Simplify nfs4_ff_find_or_create_ds_client()
  NFS/flexfiles: Simplify nfs4_ff_layout_select_ds_fh()
  NFS/flexfiles: Speed up read failover when DSes are down
  NFS/flexfiles: Don't invalidate DS deviceids for being unresponsive
  ...
2019-03-12 14:50:42 -07:00
Linus Torvalds
f88c5942cf overlayfs update for 5.1
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXIdy6QAKCRDh3BK/laaZ
 PByaAP4i2zjNXfp5AJ7CbBgOmA92QeeNeUexAz7cZb9SKCWHCwEA+yyCWXTn+PlM
 OF2OU+nmH7btbo0kwMhdKKtdOocGMAQ=
 =58lL
 -----END PGP SIGNATURE-----

Merge tag 'ovl-update-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs

Pull overlayfs updates from Miklos Szeredi:
 "Fix copy up of security related xattrs"

* tag 'ovl-update-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: Do not lose security.capability xattr over metadata file copy-up
  ovl: During copy up, first copy up data and then xattrs
2019-03-12 14:48:52 -07:00
Linus Torvalds
dfee9c257b fuse update for 5.1
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXIdqOwAKCRDh3BK/laaZ
 PFRlAP0RZr7vDfGcZTXGApcIr63YDjzi8Gg1/Jhd0jrzLbKcdAD+P0d6bupWWwOl
 yGjVxY9LkXNJiTI2Q+Equ7AgMYvDcQk=
 =Lvcr
 -----END PGP SIGNATURE-----

Merge tag 'fuse-update-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse

Pull fuse updates from Miklos Szeredi:
 "Scalability and performance improvements, as well as minor bug fixes
  and cleanups"

* tag 'fuse-update-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (25 commits)
  fuse: cache readdir calls if filesystem opts out of opendir
  fuse: support clients that don't implement 'opendir'
  fuse: lift bad inode checks into callers
  fuse: multiplex cached/direct_io file operations
  fuse add copy_file_range to direct io fops
  fuse: use iov_iter based generic splice helpers
  fuse: Switch to using async direct IO for FOPEN_DIRECT_IO
  fuse: use atomic64_t for khctr
  fuse: clean up aborted
  fuse: Protect ff->reserved_req via corresponding fi->lock
  fuse: Protect fi->nlookup with fi->lock
  fuse: Introduce fi->lock to protect write related fields
  fuse: Convert fc->attr_version into atomic64_t
  fuse: Add fuse_inode argument to fuse_prepare_release()
  fuse: Verify userspace asks to requeue interrupt that we really sent
  fuse: Do some refactoring in fuse_dev_do_write()
  fuse: Wake up req->waitq of only if not background
  fuse: Optimize request_end() by not taking fiq->waitq.lock
  fuse: Kill fasync only if interrupt is queued in queue_interrupt()
  fuse: Remove stale comment in end_requests()
  ...
2019-03-12 14:46:26 -07:00
Linus Torvalds
7b47a9e7c8 Merge branch 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs mount infrastructure updates from Al Viro:
 "The rest of core infrastructure; no new syscalls in that pile, but the
  old parts are switched to new infrastructure. At that point
  conversions of individual filesystems can happen independently; some
  are done here (afs, cgroup, procfs, etc.), there's also a large series
  outside of that pile dealing with NFS (quite a bit of option-parsing
  stuff is getting used there - it's one of the most convoluted
  filesystems in terms of mount-related logics), but NFS bits are the
  next cycle fodder.

  It got seriously simplified since the last cycle; documentation is
  probably the weakest bit at the moment - I considered dropping the
  commit introducing Documentation/filesystems/mount_api.txt (cutting
  the size increase by quarter ;-), but decided that it would be better
  to fix it up after -rc1 instead.

  That pile allows to do followup work in independent branches, which
  should make life much easier for the next cycle. fs/super.c size
  increase is unpleasant; there's a followup series that allows to
  shrink it considerably, but I decided to leave that until the next
  cycle"

* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits)
  afs: Use fs_context to pass parameters over automount
  afs: Add fs_context support
  vfs: Add some logging to the core users of the fs_context log
  vfs: Implement logging through fs_context
  vfs: Provide documentation for new mount API
  vfs: Remove kern_mount_data()
  hugetlbfs: Convert to fs_context
  cpuset: Use fs_context
  kernfs, sysfs, cgroup, intel_rdt: Support fs_context
  cgroup: store a reference to cgroup_ns into cgroup_fs_context
  cgroup1_get_tree(): separate "get cgroup_root to use" into a separate helper
  cgroup_do_mount(): massage calling conventions
  cgroup: stash cgroup_root reference into cgroup_fs_context
  cgroup2: switch to option-by-option parsing
  cgroup1: switch to option-by-option parsing
  cgroup: take options parsing into ->parse_monolithic()
  cgroup: fold cgroup1_mount() into cgroup1_get_tree()
  cgroup: start switching to fs_context
  ipc: Convert mqueue fs to fs_context
  proc: Add fs_context support to procfs
  ...
2019-03-12 14:08:19 -07:00
Linus Torvalds
5f739e4a49 Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
 "Assorted fixes (really no common topic here)"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: Make __vfs_write() static
  vfs: fix preadv64v2 and pwritev64v2 compat syscalls with offset == -1
  pipe: stop using ->can_merge
  splice: don't merge into linked buffers
  fs: move generic stat response attr handling to vfs_getattr_nosec
  orangefs: don't reinitialize result_mask in ->getattr
  fs/devpts: always delete dcache dentry-s in dput()
2019-03-12 13:27:20 -07:00
Trond Myklebust
400417b05f pNFS: Fix a typo in pnfs_update_layout
We're supposed to wait for the outstanding layout count to go to zero,
but that got lost somehow.

Fixes: d03360aaf5 ("pNFS: Ensure we return the error if someone...")
Reported-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-12 16:04:51 -04:00
Linus Torvalds
a667cb7a94 Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:

 - a few misc things

 - the rest of MM

-  remove flex_arrays, replace with new simple radix-tree implementation

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (38 commits)
  Drop flex_arrays
  sctp: convert to genradix
  proc: commit to genradix
  generic radix trees
  selinux: convert to kvmalloc
  md: convert to kvmalloc
  openvswitch: convert to kvmalloc
  of: fix kmemleak crash caused by imbalance in early memory reservation
  mm: memblock: update comments and kernel-doc
  memblock: split checks whether a region should be skipped to a helper function
  memblock: remove memblock_{set,clear}_region_flags
  memblock: drop memblock_alloc_*_nopanic() variants
  memblock: memblock_alloc_try_nid: don't panic
  treewide: add checks for the return value of memblock_alloc*()
  swiotlb: add checks for the return value of memblock_alloc*()
  init/main: add checks for the return value of memblock_alloc*()
  mm/percpu: add checks for the return value of memblock_alloc*()
  sparc: add checks for the return value of memblock_alloc*()
  ia64: add checks for the return value of memblock_alloc*()
  arch: don't memset(0) memory returned by memblock_alloc()
  ...
2019-03-12 10:39:53 -07:00
Kent Overstreet
94f8f3b02e proc: commit to genradix
The new generic radix trees have a simpler API and implementation, and
no limitations on number of elements, so all flex_array users are being
converted

Link: http://lkml.kernel.org/r/20181217131929.11727-6-kent.overstreet@gmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Pravin B Shelar <pshelar@ovn.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 10:04:02 -07:00
Alexey Dobriyan
d5a572a4cb proc: calculate end pointer for /proc/*/* lookup at compile time
Compilers like to transform loops like

	for (i = 0; i < n; i++) {
		[use p[i]]
	}

into
	for (p = p0; p < end; p++) {
		...
	}

Do it by hand, so that it results in overall simpler loop
and smaller code.

Space savings:

	$ ./scripts/bloat-o-meter ../vmlinux-001 ../obj/vmlinux
	add/remove: 0/0 grow/shrink: 2/1 up/down: 4/-9 (-5)
	Function                                     old     new   delta
	proc_tid_base_lookup                          17      19      +2
	proc_tgid_base_lookup                         17      19      +2
	proc_pident_lookup                           179     170      -9

The same could be done to proc_pident_readdir(), but the code becomes
bigger for some reason.

[sfr@canb.auug.org.au: merge fix for proc_pident_lookup() API change]
  Link: http://lkml.kernel.org/r/20190131160135.4a8ae70b@canb.auug.org.au
Link: http://lkml.kernel.org/r/20190114200422.GB9680@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: James Morris <jmorris@namei.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 10:04:01 -07:00
Nikolay Borisov
b5420237ec mm: refactor readahead defines in mm.h
All users of VM_MAX_READAHEAD actually convert it to kbytes and then to
pages. Define the macro explicitly as (SZ_128K / PAGE_SIZE). This
simplifies the expression in every filesystem. Also rename the macro to
VM_READAHEAD_PAGES to properly convey its meaning. Finally remove unused
VM_MIN_READAHEAD

[akpm@linux-foundation.org: fix fs/io_uring.c, per Stephen]
Link: http://lkml.kernel.org/r/20181221144053.24318-1-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 10:04:01 -07:00
Colin Ian King
cb1d150d80 hpfs: fix spelling mistake "partion" -> "partition"
Trivial fix to spelling mistakes in comments

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mikulas Patocka <mikulas@twibright.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 09:58:03 -07:00
Darrick J. Wong
6ef50fe9af xfs: clean up xfs_dir2_leaf_addname
Remove typedefs and consolidate local variable initialization.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
2019-03-12 09:19:38 -07:00
Linus Torvalds
ea295481b6 XArray updates for 5.1-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAlyHF2oUHHdpbGx5QGlu
 ZnJhZGVhZC5vcmcACgkQDpNsjXcpgj5j9AgAlpeptRfnPO0+VXj+EbxaOOI8tOG+
 w+vBasWoQB+lZ9ctf1qUQVSeLn0ErxTM7BaIP7plfDrEWiIbRWkV18B+heS5d1Yz
 aTV1d/8tG6/eo61K2VqXHbUhymgMtbXDsg1rwWTF8+Q4xIcMqfYAR0f9ptU1Oejc
 pNAn16dYgKi6+4eluY7gXxruBosQ6yNml6iEje9A3uR8nhzTI/P3Yf2GGIZnQLsL
 +UIx4Ps38dJ3VCYBPfbnszZfYPpILUH9/Bdx+mAMUtZwvpM3JYqc8XsiFfqDO7n1
 3003yUytnRkb1UK3QIvkbPt0G8UOI4s9fxRPsA8lLSww/f2y1r5kC4Mxbg==
 =HSP/
 -----END PGP SIGNATURE-----

Merge tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-dax

Pull XArray updates from Matthew Wilcox:
 "This pull request changes the xa_alloc() API. I'm only aware of one
  subsystem that has started trying to use it, and we agree on the fixup
  as part of the merge.

  The xa_insert() error code also changed to match xa_alloc() (EEXIST to
  EBUSY), and I added xa_alloc_cyclic(). Beyond that, the usual
  bugfixes, optimisations and tweaking.

  I now have a git tree with all users of the radix tree and IDR
  converted over to the XArray that I'll be feeding to maintainers over
  the next few weeks"

* tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-dax:
  XArray: Fix xa_reserve for 2-byte aligned entries
  XArray: Fix xa_erase of 2-byte aligned entries
  XArray: Use xa_cmpxchg to implement xa_reserve
  XArray: Fix xa_release in allocating arrays
  XArray: Mark xa_insert and xa_reserve as must_check
  XArray: Add cyclic allocation
  XArray: Redesign xa_alloc API
  XArray: Add support for 1s-based allocation
  XArray: Change xa_insert to return -EBUSY
  XArray: Update xa_erase family descriptions
  XArray tests: RCU lock prohibits GFP_KERNEL
2019-03-11 20:06:18 -07:00
ZhangXiaoxu
62c9d2674b inotify: Fix fsnotify_mark refcount leak in inotify_update_existing_watch()
Commit 4d97f7d53d ("inotify: Add flag IN_MASK_CREATE for
inotify_add_watch()") forgot to call fsnotify_put_mark() with
IN_MASK_CREATE after fsnotify_find_mark()

Fixes: 4d97f7d53d ("inotify: Add flag IN_MASK_CREATE for inotify_add_watch()")
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2019-03-11 10:13:17 +01:00
Linus Torvalds
c3665a6be5 Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull integrity updates from James Morris:
 "Mimi Zohar says:

   'Linux 5.0 introduced the platform keyring to allow verifying the IMA
    kexec kernel image signature using the pre-boot keys. This pull
    request similarly makes keys on the platform keyring accessible for
    verifying the PE kernel image signature.

    Also included in this pull request is a new IMA hook that tags tmp
    files, in policy, indicating the file hash needs to be calculated.
    The remaining patches are cleanup'"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  evm: Use defined constant for UUID representation
  ima: define ima_post_create_tmpfile() hook and add missing call
  evm: remove set but not used variable 'xattr'
  encrypted-keys: fix Opt_err/Opt_error = -1
  kexec, KEYS: Make use of platform keyring for signature verify
  integrity, KEYS: add a reference to platform keyring
2019-03-10 17:32:04 -07:00
Darrick J. Wong
f51fac6892 xfs: zero initialize highstale and lowstale in xfs_dir2_leaf_addname
Smatch complains about the following:

fs/xfs/libxfs/xfs_dir2_leaf.c:848 xfs_dir2_leaf_addname() error:
uninitialized symbol 'lowstale'.

fs/xfs/libxfs/xfs_dir2_leaf.c:849 xfs_dir2_leaf_addname() error:
uninitialized symbol 'highstale'.

I don't think there's any incorrect behavior associated with the
uninitialized variable, but as the author of the previous zero-init
patch points out, it's best not to be passing around pointers to
uninitialized stack areas.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
2019-03-10 11:41:31 -07:00
Linus Torvalds
92fff53b71 SCSI misc on 20190306
This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
 hisi_sas, target/iscsi and target/core.  Additionally Christoph
 refactored gdth as part of the dma changes.  The major mid-layer
 change this time is the removal of bidi commands and with them the
 whole of the osd/exofs driver and filesystem.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXIC54SYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishT1GAPwJEV23
 ExPiPsnuVgKj49nLTagZ3rILRQcYNbL+MNYqxQEA0cT8FHzSDBfWY5OKPNE+RQ8z
 f69LpXGmMpuagKGvvd4=
 =Fhy1
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
  hisi_sas, target/iscsi and target/core.

  Additionally Christoph refactored gdth as part of the dma changes. The
  major mid-layer change this time is the removal of bidi commands and
  with them the whole of the osd/exofs driver and filesystem. This is a
  major simplification for block and mq in particular"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
  scsi: cxgb4i: validate tcp sequence number only if chip version <= T5
  scsi: cxgb4i: get pf number from lldi->pf
  scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
  scsi: mpt3sas: Add missing breaks in switch statements
  scsi: aacraid: Fix missing break in switch statement
  scsi: kill command serial number
  scsi: csiostor: drop serial_number usage
  scsi: mvumi: use request tag instead of serial_number
  scsi: dpt_i2o: remove serial number usage
  scsi: st: osst: Remove negative constant left-shifts
  scsi: ufs-bsg: Allow reading descriptors
  scsi: ufs: Allow reading descriptor via raw upiu
  scsi: ufs-bsg: Change the calling convention for write descriptor
  scsi: ufs: Remove unused device quirks
  Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  scsi: megaraid_sas: Remove a bunch of set but not used variables
  scsi: clean obsolete return values of eh_timed_out
  scsi: sd: Optimal I/O size should be a multiple of physical block size
  scsi: MAINTAINERS: SCSI initiator and target tweaks
  scsi: fcoe: make use of fip_mode enum complete
  ...
2019-03-09 16:53:47 -08:00
Linus Torvalds
a50243b1dd 5.1 Merge Window Pull Request
This has been a slightly more active cycle than normal with ongoing core
 changes and quite a lot of collected driver updates.
 
 - Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe
 
 - A new data transfer mode for HFI1 giving higher performance
 
 - Significant functional and bug fix update to the mlx5 On-Demand-Paging MR
   feature
 
 - A chip hang reset recovery system for hns
 
 - Change mm->pinned_vm to an atomic64
 
 - Update bnxt_re to support a new 57500 chip
 
 - A sane netlink 'rdma link add' method for creating rxe devices and fixing
   the various unregistration race conditions in rxe's unregister flow
 
 - Allow lookup up objects by an ID over netlink
 
 - Various reworking of the core to driver interface:
   * Drivers should not assume umem SGLs are in PAGE_SIZE chunks
   * ucontext is accessed via udata not other means
   * Start to make the core code responsible for object memory
     allocation
   * Drivers should convert struct device to struct ib_device
     via a helper
   * Drivers have more tools to avoid use after unregister problems
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAlyAJYYACgkQOG33FX4g
 mxrWwQ/+OyAx4Moru7Aix0C6GWxTJp/wKgw21CS3reZxgLai6x81xNYG/s2wCNjo
 IccObVd7mvzyqPdxOeyHBsJBbQDqWvoD6O2duH8cqGMgBRgh3CSdUep2zLvPpSAx
 2W1SvWYCLDnCuarboFrCA8c4AN3eCZiqD7z9lHyFQGjy3nTUWzk1uBaOP46uaiMv
 w89N8EMdXJ/iY6ONzihvE05NEYbMA8fuvosKLLNdghRiHIjbMQU8SneY23pvyPDd
 ZziPu9NcO3Hw9OVbkwtJp47U3KCBgvKHmnixyZKkikjiD+HVoABw2IMwcYwyBZwP
 Bic/ddONJUvAxMHpKRnQaW7znAiHARk21nDG28UAI7FWXH/wMXgicMp6LRcNKqKF
 vqXdxHTKJb0QUR4xrYI+eA8ihstss7UUpgSgByuANJ0X729xHiJtlEvPb1DPo1Dz
 9CB4OHOVRl5O8sA5Jc6PSusZiKEpvWoyWbdmw0IiwDF5pe922VLl5Nv88ta+sJ38
 v2Ll5AgYcluk7F3599Uh9D7gwp5hxW2Ph3bNYyg2j3HP4/dKsL9XvIJPXqEthgCr
 3KQS9rOZfI/7URieT+H+Mlf+OWZhXsZilJG7No0fYgIVjgJ00h3SF1/299YIq6Qp
 9W7ZXBfVSwLYA2AEVSvGFeZPUxgBwHrSZ62wya4uFeB1jyoodPk=
 =p12E
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
 "This has been a slightly more active cycle than normal with ongoing
  core changes and quite a lot of collected driver updates.

   - Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe

   - A new data transfer mode for HFI1 giving higher performance

   - Significant functional and bug fix update to the mlx5
     On-Demand-Paging MR feature

   - A chip hang reset recovery system for hns

   - Change mm->pinned_vm to an atomic64

   - Update bnxt_re to support a new 57500 chip

   - A sane netlink 'rdma link add' method for creating rxe devices and
     fixing the various unregistration race conditions in rxe's
     unregister flow

   - Allow lookup up objects by an ID over netlink

   - Various reworking of the core to driver interface:
       - drivers should not assume umem SGLs are in PAGE_SIZE chunks
       - ucontext is accessed via udata not other means
       - start to make the core code responsible for object memory
         allocation
       - drivers should convert struct device to struct ib_device via a
         helper
       - drivers have more tools to avoid use after unregister problems"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits)
  net/mlx5: ODP support for XRC transport is not enabled by default in FW
  IB/hfi1: Close race condition on user context disable and close
  RDMA/umem: Revert broken 'off by one' fix
  RDMA/umem: minor bug fix in error handling path
  RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp
  cxgb4: kfree mhp after the debug print
  IB/rdmavt: Fix concurrency panics in QP post_send and modify to error
  IB/rdmavt: Fix loopback send with invalidate ordering
  IB/iser: Fix dma_nents type definition
  IB/mlx5: Set correct write permissions for implicit ODP MR
  bnxt_re: Clean cq for kernel consumers only
  RDMA/uverbs: Don't do double free of allocated PD
  RDMA: Handle ucontext allocations by IB/core
  RDMA/core: Fix a WARN() message
  bnxt_re: fix the regression due to changes in alloc_pbl
  IB/mlx4: Increase the timeout for CM cache
  IB/core: Abort page fault handler silently during owning process exit
  IB/mlx5: Validate correct PD before prefetch MR
  IB/mlx5: Protect against prefetch of invalid MR
  RDMA/uverbs: Store PR pointer before it is overwritten
  ...
2019-03-09 15:53:03 -08:00
Linus Torvalds
36011ddc78 We've only got three patches ready for this merge window:
- Fix a hang related to missed wakeups for glocks from Andreas Gruenbacher.
  - Rework of how gfs2 manages its debugfs files from Greg K-H.
  - An incorrect assert when truncating or deleting files from Tim Smith.
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJcgqv8AAoJENeLYdPf93o7rJoIAJvTdAaTuU0IGRSC+LTfo6do
 0bvALvhqfBDpZDqhRXR+z9Nkb6L5SP4S9iDvPMho+abznXN/ORMn8uZeY3dD/zon
 vEI1OHT8/WTCzmJZX2Kw2Cbm/nap6NNr+ypXkcSpKVmzchXRLRkdux/Kt6vf26SV
 N8Qb5jNY476n+jeDfemlaODkOmwGEUv/CdNZXHMuv4jdmUpzKQroBAAmVhxx01nz
 IugUsqAX5q8VNYha2Rm0JWnAMMQRZjQ3ajHgYwLTDzJf/c9pGs9OetK8vpMP2aAz
 W+Fpd4r76/UsaZE70il31yq4BJ7PgcqrerJVH6IvWnulm8jIphQf5+yU9QOAHVo=
 =n1GT
 -----END PGP SIGNATURE-----

Merge tag 'gfs2-5.1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 updates from Bob Peterson:
 "We've only got three patches ready for this merge window:

   - Fix a hang related to missed wakeups for glocks from Andreas
     Gruenbacher

   - Rework of how gfs2 manages its debugfs files from Greg K-H

   - An incorrect assert when truncating or deleting files from Tim
     Smith"

* tag 'gfs2-5.1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix missed wakeups in find_insert_glock
  gfs2: Fix an incorrect gfs2_assert()
  gfs: no need to check return value of debugfs_create functions
2019-03-09 11:52:11 -08:00
Linus Torvalds
e519a8c2c3 smb3/cifs fixes including for large i/o error cases, fixes for 3 xfstests, improved crediting (smb3 flow control); improved tracing
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAlyCm8sACgkQiiy9cAdy
 T1HeQwwAvlV0Wkbg+c24musbdsKLZ0WpT8SFV1gaA0hA8090WxfETp+RxuUbHefY
 /pHfZj0zIsi2LEU22zw9tZtypKPD8d/Zt6LTZjCwW55c6HepTxnAwUDwpkGHD02e
 Rcau4ahGIWrcrbCJikG8XrAk+4ZOy52Vjf15JQR2Z8Ctt79UBJMqtKl6P90aZL/W
 HcpKNhrV+J7bLoWzZYRomKq/nnL+qKEV2JLk8ig065auBQWMKvvyBQAanmJG+vBf
 sgqXuE4x+cxpzClkJQ4aWMeEkgjyWuhRk6+y5qXaAGCHtUVotkZse1Dwtx52HjcW
 f6yC80CT2+vf7yoXW2YqJR28pJQoACbtZPgqMUPe+n6ojZIogWwJ2cBgVKqg8+dY
 IxTrGNHqvVy8jz3T8A9H4xRKse53Oob5gzAYnxk8zjFzt3aj/2mOw4YKENzHLzVI
 iJRLsBXo9JpSgEoiGDvGseabc5Z98BdQ7rzhg0kT2U9g+lopN42FRY5UOaG6n1oz
 V6tY2+FU
 =w3ho
 -----END PGP SIGNATURE-----

Merge tag '5.1-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb3 updates from Steve French:

 - smb3/cifs fixes including for large i/o error cases

 - fixes for three xfstests

 - improved crediting (smb3 flow control)

 - improved tracing

* tag '5.1-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (44 commits)
  fs: cifs: Kconfig: pedantic formatting
  smb3: request more credits on normal (non-large read/write) ops
  CIFS: Mask off signals when sending SMB packets
  CIFS: Return -EAGAIN instead of -ENOTSOCK
  CIFS: Only send SMB2_NEGOTIATE command on new TCP connections
  CIFS: Fix read after write for files with read caching
  smb3: for kerberos mounts display the credential uid used
  cifs: use correct format characters
  smb3: add dynamic trace point for query_info_enter/done
  smb3: add dynamic trace point for smb3_cmd_enter
  smb3: improve dynamic tracing of open and posix mkdir
  smb3: add missing read completion trace point
  smb3: Add tracepoints for read, write and query_dir enter
  smb3: add tracepoints for query dir
  smb3: Update POSIX negotiate context with POSIX ctxt GUID
  cifs: update internal module version number
  CIFS: Try to acquire credits at once for compound requests
  CIFS: Return error code when getting file handle for writeback
  CIFS: Move open file handling to writepages
  CIFS: Move unlocking pages from wdata_send_pages()
  ...
2019-03-09 11:48:20 -08:00
Linus Torvalds
d1cae94871 fscrypt updates for v5.1
First: Ted, Jaegeuk, and I have decided to add me as a co-maintainer for
 fscrypt, and we're now using a shared git tree.  So we've updated
 MAINTAINERS accordingly, and I'm doing the pull request this time.
 
 The actual changes for v5.1 are:
 
 - Remove the fs-specific kconfig options like CONFIG_EXT4_ENCRYPTION and
   make fscrypt support for all fscrypt-capable filesystems be controlled
   by CONFIG_FS_ENCRYPTION, similar to how CONFIG_QUOTA works.
 
 - Improve error code for rename() and link() into encrypted directories.
 
 - Various cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCXH2YDRQcZWJpZ2dlcnNA
 Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK+SAAQCWYOTwYko8uE8Ze8i2fiUm0vr91NOg
 zj5DGmK7Izxy/gEAsNDOVA7zWrDg/f5600/7aLpDQQTGHA38YVsgiyd7DgY=
 =S3tT
 -----END PGP SIGNATURE-----

Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt

Pull fscrypt updates from Eric Biggers:
 "First: Ted, Jaegeuk, and I have decided to add me as a co-maintainer
  for fscrypt, and we're now using a shared git tree. So we've updated
  MAINTAINERS accordingly, and I'm doing the pull request this time.

  The actual changes for v5.1 are:

   - Remove the fs-specific kconfig options like CONFIG_EXT4_ENCRYPTION
     and make fscrypt support for all fscrypt-capable filesystems be
     controlled by CONFIG_FS_ENCRYPTION, similar to how CONFIG_QUOTA
     works.

   - Improve error code for rename() and link() into encrypted
     directories.

   - Various cleanups"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  MAINTAINERS: add Eric Biggers as an fscrypt maintainer
  fscrypt: return -EXDEV for incompatible rename or link into encrypted dir
  fscrypt: remove filesystem specific build config option
  f2fs: use IS_ENCRYPTED() to check encryption status
  ext4: use IS_ENCRYPTED() to check encryption status
  fscrypt: remove CRYPTO_CTR dependency
2019-03-09 10:54:24 -08:00
Linus Torvalds
a39f009ace pstore cleanups
- Remove some needless memory allocations (Yue Hu, Kees Cook)
 - Add zero-length checks to avoid no-op calls (Yue Hu)
 -----BEGIN PGP SIGNATURE-----
 Comment: Kees Cook <kees@outflux.net>
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlx9X2MWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJla9EACEG5bBU++0KiqJsXqddOZ4cmcE
 j1oHyBHgBuXkkuZoLz5hrG45D1jBCEjZNoVdrDZEBUpql6rED+4d7RGls2zV5cku
 LMwEpYV4/+GxeJCE5i+uFHdAsnMGEtmRFgo2J7l7gnWbldhq0O4AsM8OUU/MLetP
 QPfQ5qXlQVVc1R+msXGJ0+zmzZwpk5iahEzYAWXh2oQI/x9yb5bcQxh9J5Xzek1u
 nByzqa23fXjHYP8hxkx4u07RzmpALPW4kdHYtZokiTWPAiYFMehRORoZwQvqXNUX
 /mHq33f2z3FZf1R0MkY7ZgcV+HkD4IjcTBMjPRqUPUKRy6UOrJp2oIzSpw9HEm7z
 yG6JFgYBXLg9huWsAPKjBoH8TUPlBL8QybktEMgz0HRWVqw9U8/KPZAtFsFg2RVA
 pKbkLTSGCO5xLrtOsBvZx3O8WY2p5sUW+R1LdLdE3Maib9bm/3OiFx3UpKH/N25O
 p9P4TuB2FF2v57XdIRVlp1RzPCEr+qMvP5GWiZVeNoj4K6JhlAfVJWuvjis9MAvj
 MfmodgVF5C2cRk4u94uaidgTCX9nYTooYxA6sxgMEKb0Qjl6cGJ8ByxmJLdeuui8
 CXuJewOxmZ42OwNXh6ClDd/PnzAWf1Fq+5h7p4vmItxZdo+dzuwxqrOlN7wcTrlC
 ldVCn3h83TwbGy0WpQ==
 =4Rey
 -----END PGP SIGNATURE-----

Merge tag 'pstore-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull pstore cleanups from Kees Cook:

 - Remove some needless memory allocations (Yue Hu, Kees Cook)

 - Add zero-length checks to avoid no-op calls (Yue Hu)

* tag 'pstore-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Avoid needless alloc during header write
  pstore/ram: Add kmsg hlen zero check to ramoops_pstore_write()
  pstore/ram: Move initialization earlier
  pstore: Avoid writing records with zero size
  pstore/ram: Replace dummy_data heap memory with stack memory
2019-03-09 09:02:47 -08:00
Linus Torvalds
38e7571c07 io_uring-2019-03-06
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlyAJvAQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgphb+EACFaKI2HIdjExQ5T7Cxebzwky+Qiro3FV55
 ziW00FZrkJ5g0h4ItBzh/5SDlcNQYZDMlA3s4xzWIMadWl5PjMPq1uJul0cITbSl
 WIJO5hpgNMXeUEhvcXUl6+f/WzpgYUxN40uW8N5V7EKlooaFVfudDqJGlvEv+UgB
 g8NWQYThSG+/e7r9OGwK0xDRVKfpjxVvmqmnDH3DrxKaDgSOwTf4xn1u41wKwfQ3
 3uPfQ+GBeTqt4a2AhOi7K6KQFNnj5Jz5CXYMiOZI2JGtLPcL6dmyBVD7K0a0HUr+
 rs4ghNdd1+puvPGNK4TX8qV0uiNrMctoRNVA/JDd1ZTYEKTmNLxeFf+olfYHlwuK
 K5FRs60/lgNzNkzcUpFvJHitPwYtxYJdB36PyswE1FZP1YviEeVoKNt9W8aIhEoA
 549uj90brfA74eCINGhq98pJqj9CNyCPw3bfi76f5Ej2utwYDb9S5Cp2gfSa853X
 qc/qNda9efEq7ikwCbPzhekRMXZo6TSXtaSmC2C+Vs5+mD1Scc4kdAvdCKGQrtr9
 aoy0iQMYO2NDZ/G5fppvXtMVuEPAZWbsGftyOe15IlMysjRze2ycJV8cFahKEVM9
 uBeXLyH1pqGU/j7ABP4+XRZ/sbHJTwjKJbnXhTgBsdU8XO/CR3U+kRQFTsidKMfH
 Wlo3uH2h2A==
 =p78E
 -----END PGP SIGNATURE-----

Merge tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-block

Pull io_uring IO interface from Jens Axboe:
 "Second attempt at adding the io_uring interface.

  Since the first one, we've added basic unit testing of the three
  system calls, that resides in liburing like the other unit tests that
  we have so far. It'll take a while to get full coverage of it, but
  we're working towards it. I've also added two basic test programs to
  tools/io_uring. One uses the raw interface and has support for all the
  various features that io_uring supports outside of standard IO, like
  fixed files, fixed IO buffers, and polled IO. The other uses the
  liburing API, and is a simplified version of cp(1).

  This adds support for a new IO interface, io_uring.

  io_uring allows an application to communicate with the kernel through
  two rings, the submission queue (SQ) and completion queue (CQ) ring.
  This allows for very efficient handling of IOs, see the v5 posting for
  some basic numbers:

    https://lore.kernel.org/linux-block/20190116175003.17880-1-axboe@kernel.dk/

  Outside of just efficiency, the interface is also flexible and
  extendable, and allows for future use cases like the upcoming NVMe
  key-value store API, networked IO, and so on. It also supports async
  buffered IO, something that we've always failed to support in the
  kernel.

  Outside of basic IO features, it supports async polled IO as well.
  This particular feature has already been tested at Facebook months ago
  for flash storage boxes, with 25-33% improvements. It makes polled IO
  actually useful for real world use cases, where even basic flash sees
  a nice win in terms of efficiency, latency, and performance. These
  boxes were IOPS bound before, now they are not.

  This series adds three new system calls. One for setting up an
  io_uring instance (io_uring_setup(2)), one for submitting/completing
  IO (io_uring_enter(2)), and one for aux functions like registrating
  file sets, buffers, etc (io_uring_register(2)). Through the help of
  Arnd, I've coordinated the syscall numbers so merge on that front
  should be painless.

  Jon did a writeup of the interface a while back, which (except for
  minor details that have been tweaked) is still accurate. Find that
  here:

    https://lwn.net/Articles/776703/

  Huge thanks to Al Viro for helping getting the reference cycle code
  correct, and to Jann Horn for his extensive reviews focused on both
  security and bugs in general.

  There's a userspace library that provides basic functionality for
  applications that don't need or want to care about how to fiddle with
  the rings directly. It has helpers to allow applications to easily set
  up an io_uring instance, and submit/complete IO through it without
  knowing about the intricacies of the rings. It also includes man pages
  (thanks to Jeff Moyer), and will continue to grow support helper
  functions and features as time progresses. Find it here:

    git://git.kernel.dk/liburing

  Fio has full support for the raw interface, both in the form of an IO
  engine (io_uring), but also with a small test application (t/io_uring)
  that can exercise and benchmark the interface"

* tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-block:
  io_uring: add a few test tools
  io_uring: allow workqueue item to handle multiple buffered requests
  io_uring: add support for IORING_OP_POLL
  io_uring: add io_kiocb ref count
  io_uring: add submission polling
  io_uring: add file set registration
  net: split out functions related to registering inflight socket files
  io_uring: add support for pre-mapped user IO buffers
  block: implement bio helper to add iter bvec pages to bio
  io_uring: batch io_kiocb allocation
  io_uring: use fget/fput_many() for file references
  fs: add fget_many() and fput_many()
  io_uring: support for IO polling
  io_uring: add fsync support
  Add io_uring IO interface
2019-03-08 14:48:40 -08:00
Darrick J. Wong
79622c7ce6 xfs: clean up xfs_dir2_leafn_add
Remove typedefs and consolidate local variable initialization.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2019-03-08 14:24:43 -08:00
Nathan Chancellor
7be73fa1c1 xfs: Zero initialize highstale and lowstale in xfs_dir2_leafn_add
When building with -Wsometimes-uninitialized, Clang warns:

fs/xfs/libxfs/xfs_dir2_node.c:481:6: warning: variable 'lowstale' is
used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
fs/xfs/libxfs/xfs_dir2_node.c:481:6: warning: variable 'highstale' is
used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]

While it isn't technically wrong, it isn't a problem in practice because
highstale and lowstale are only initialized in xfs_dir2_leafn_add when
compact is not zero then they are passed to xfs_dir3_leaf_find_entry,
where they are initialized before use when compact is zero. Regardless,
it's better not to be passing around uninitialized stack memory so zero
initialize these variables, which silences this warning.

Link: https://github.com/ClangBuiltLinux/linux/issues/393
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-03-08 14:24:43 -08:00
Linus Torvalds
80201fe175 for-5.1/block-20190302
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlx63XIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpp2vEACfrrQsap7R+Av28mmXpmXi2FPa3g5Tev1t
 yYjK2qHvhlMZjPTYw3hCmbYdDDczlF7PEgSE2x2DjdcsYapb8Fy1lZ2X16c7ztBR
 HD/t9b5AVSQsczZzKgv3RqsNtTnjzS5V0A8XH8FAP2QRgiwDMwSN6G0FP0JBLbE/
 ZgxQrH1Iy1F33Wz4hI3Z7dEghKPZrH1IlegkZCEu47q9SlWS76qUetSy2GEtchOl
 3Lgu54mQZyVdI5/QZf9DyMDLF6dIz3tYU2qhuo01AHjGRCC72v86p8sIiXcUr94Q
 8pbegJhJ/g8KBol9Qhv3+pWG/QUAZwi/ZwasTkK+MJ4klRXfOrznxPubW1z6t9Vn
 QRo39Po5SqqP0QWAscDxCFjESIQlWlKa+LZurJL7DJDCUGrSgzTpnVwFqKwc5zTP
 HJa5MT2tEeL2TfUYRYCfh0ZV0elINdHA1y1klDBh38drh4EWr2gW8xdseGYXqRjh
 fLgEpoF7VQ8kTvxKN+E4jZXkcZmoLmefp0ZyAbblS6IawpPVC7kXM9Fdn2OU8f2c
 fjVjvSiqxfeN6dnpfeLDRbbN9894HwgP/LPropJOQ7KmjCorQq5zMDkAvoh3tElq
 qwluRqdBJpWT/F05KweY+XVW8OawIycmUWqt6JrVNoIDAK31auHQv47kR0VA4OvE
 DRVVhYpocw==
 =VBaU
 -----END PGP SIGNATURE-----

Merge tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block

Pull block layer updates from Jens Axboe:
 "Not a huge amount of changes in this round, the biggest one is that we
  finally have Mings multi-page bvec support merged. Apart from that,
  this pull request contains:

   - Small series that avoids quiescing the queue for sysfs changes that
     match what we currently have (Aleksei)

   - Series of bcache fixes (via Coly)

   - Series of lightnvm fixes (via Mathias)

   - NVMe pull request from Christoph. Nothing major, just SPDX/license
     cleanups, RR mp policy (Hannes), and little fixes (Bart,
     Chaitanya).

   - BFQ series (Paolo)

   - Save blk-mq cpu -> hw queue mapping, removing a pointer indirection
     for the fast path (Jianchao)

   - fops->iopoll() added for async IO polling, this is a feature that
     the upcoming io_uring interface will use (Christoph, me)

   - Partition scan loop fixes (Dongli)

   - mtip32xx conversion from managed resource API (Christoph)

   - cdrom registration race fix (Guenter)

   - MD pull from Song, two minor fixes.

   - Various documentation fixes (Marcos)

   - Multi-page bvec feature. This brings a lot of nice improvements
     with it, like more efficient splitting, larger IOs can be supported
     without growing the bvec table size, and so on. (Ming)

   - Various little fixes to core and drivers"

* tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block: (117 commits)
  block: fix updating bio's front segment size
  block: Replace function name in string with __func__
  nbd: propagate genlmsg_reply return code
  floppy: remove set but not used variable 'q'
  null_blk: fix checking for REQ_FUA
  block: fix NULL pointer dereference in register_disk
  fs: fix guard_bio_eod to check for real EOD errors
  blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map
  block: optimize bvec iteration in bvec_iter_advance
  block: introduce mp_bvec_for_each_page() for iterating over page
  block: optimize blk_bio_segment_split for single-page bvec
  block: optimize __blk_segment_map_sg() for single-page bvec
  block: introduce bvec_nth_page()
  iomap: wire up the iopoll method
  block: add bio_set_polled() helper
  block: wire up block device iopoll method
  fs: add an iopoll method to struct file_operations
  loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()
  loop: do not print warn message if partition scan is successful
  block: bounce: make sure that bvec table is updated
  ...
2019-03-08 14:12:17 -08:00
NeilBrown
f875a792ab nfsd: allow nfsv3 readdir request to be larger.
nfsd currently reports the NFSv3 dtpref FSINFO parameter
to be PAGE_SIZE, so NFS clients will typically ask for one
page of directory entries at a time.  This is needlessly restrictive
as nfsd can handle larger replies easily.

Also, a READDIR request (but not a READDIRPLUS request) has the count
size clipped to PAGE_SIE, again unnecessary.

This patch lifts these limits so that larger readdir requests can be
used.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-03-08 14:30:31 -05:00
Andreas Gruenbacher
605b0487f0 gfs2: Fix missed wakeups in find_insert_glock
Mark Syms has reported seeing tasks that are stuck waiting in
find_insert_glock.  It turns out that struct lm_lockname contains four padding
bytes on 64-bit architectures that function glock_waitqueue doesn't skip when
hashing the glock name.  As a result, we can end up waking up the wrong
waitqueue, and the waiting tasks may be stuck forever.

Fix that by using ht_parms.key_len instead of sizeof(struct lm_lockname) for
the key length.

Reported-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2019-03-08 15:49:01 +01:00
Linus Torvalds
b5dd0c658c Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:

 - some of the rest of MM

 - various misc things

 - dynamic-debug updates

 - checkpatch

 - some epoll speedups

 - autofs

 - rapidio

 - lib/, lib/lzo/ updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (83 commits)
  samples/mic/mpssd/mpssd.h: remove duplicate header
  kernel/fork.c: remove duplicated include
  include/linux/relay.h: fix percpu annotation in struct rchan
  arch/nios2/mm/fault.c: remove duplicate include
  unicore32: stop printing the virtual memory layout
  MAINTAINERS: fix GTA02 entry and mark as orphan
  mm: create the new vm_fault_t type
  arm, s390, unicore32: remove oneliner wrappers for memblock_alloc()
  arch: simplify several early memory allocations
  openrisc: simplify pte_alloc_one_kernel()
  sh: prefer memblock APIs returning virtual address
  microblaze: prefer memblock API returning virtual address
  powerpc: prefer memblock APIs returning virtual address
  lib/lzo: separate lzo-rle from lzo
  lib/lzo: implement run-length encoding
  lib/lzo: fast 8-byte copy on arm64
  lib/lzo: 64-bit CTZ on arm64
  lib/lzo: tidy-up ifdefs
  ipc/sem.c: replace kvmalloc/memset with kvzalloc and use struct_size
  ipc: annotate implicit fall through
  ...
2019-03-07 19:25:37 -08:00
Oleg Nesterov
6eb3c3d0a5 exec: increase BINPRM_BUF_SIZE to 256
Large enterprise clients often run applications out of networked file
systems where the IT mandated layout of project volumes can end up
leading to paths that are longer than 128 characters.  Bumping this up
to the next order of two solves this problem in all but the most
egregious case while still fitting into a 512b slab.

[oleg@redhat.com: update comment, per Kees]
Link: http://lkml.kernel.org/r/20181112160956.GA28472@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Ben Woodard <woodard@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:32:01 -08:00
Vineet Gupta
26e152252e fs/exec.c: replace opencoded set_mask_bits()
Link: http://lkml.kernel.org/r/1548275584-18096-2-git-send-email-vgupta@synopsys.com
Link: http://lkml.kernel.org/g/20150807115710.GA16897@redhat.com
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:32:01 -08:00
Hou Tao
67ceb1eca0 fat: enable .splice_write to support splice on O_DIRECT file
Now splice() on O_DIRECT-opened fat file will return -EFAULT, that is
because the default .splice_write, namely default_file_splice_write(),
will construct an ITER_KVEC iov_iter and dio_refill_pages() in dio path
can not handle it.

Fix it by implementing .splice_write through iter_file_splice_write().

Spotted by xfs-tests generic/091.

Link: http://lkml.kernel.org/r/20190210094754.56355-1-houtao1@huawei.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:32:01 -08:00
NeilBrown
660c9fc72e autofs: clear O_NONBLOCK on the pipe
autofs does not expect the pipe it is given to have O_NONBLOCK set -
specifically if __kernel_write() in autofs_write() returns -EAGAIN, this
is treated as a fatal error and the pipe is closed.

For safety autofs should, therefore, clear the O_NONBLOCK flag.

Releases of systemd prior to 8th February 2019 used
  pipe2(p, O_NONBLOCK|O_CLOEXEC)
and thus (inadvertently) set this flag.

Link: http://lkml.kernel.org/r/154993550902.3321.1183632970046073478.stgit@pluto-themaw-net
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:32:01 -08:00
Ian Kent
874d22d62b fs/autofs/inode.c: use seq_puts() for simple strings in autofs_show_options()
Fix checkpatch.sh WARNING about the use of seq_printf() to print simple
strings in autofs_show_options(), use seq_puts() in this case.

Link: http://lkml.kernel.org/r/154889012613.4863.12231175554744203482.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:32:01 -08:00
Ian Kent
60d6d04ca3 autofs: add ignore mount option
Add an autofs file system mount option that can be used to provide a
generic indicator to applications that the mount entry should be ignored
when displaying mount information.

In other OSes that provide autofs and that provide a mount list to user
space based on the kernel mount list a no-op mount option ("ignore" is
the one use on the most common OS) is allowed so that autofs file system
users can optionally use it.

The idea is that it be used by user space programs to exclude autofs
mounts from consideration when reading the mounts list.

Prior to the change to link /etc/mtab to /proc/self/mounts all I needed
to do to achieve this was to use mount(2) and not update the mtab but
now that no longer works.

I know the symlinking happened a long time ago and I considered doing
this then but, at the time I couldn't remember the commonly used option
name and thought persuading the various utility maintainers would be too
hard.

But now I have a RHEL request to do this for compatibility for a widely
used product so I want to go ahead with it and try and enlist the help
of some utility package maintainers.

Clearly, without the option nothing can be done so it's at least a
start.

Link: http://lkml.kernel.org/r/154725123970.11260.6113771566924907275.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:32:01 -08:00
Alexey Dobriyan
49ac981965 fs/binfmt_elf.c: spread const a little
Link: http://lkml.kernel.org/r/20190204202830.GC27482@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:32:01 -08:00
Alexey Dobriyan
93f044e282 fs/binfmt_elf.c: use list_for_each_entry()
[adobriyan@gmail.com: fixup compilation]
  Link: http://lkml.kernel.org/r/20190205064334.GA2152@avx2
Link: http://lkml.kernel.org/r/20190204202800.GB27482@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:32:01 -08:00
Alexey Dobriyan
faf1c31520 fs/binfmt_elf.c: don't be afraid of overflow
Number of ELF program headers is 16-bit by spec, so total size
comfortably fits into "unsigned int".

Space savings: 7 bytes!

	add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-7 (-7)
	Function                                     old     new   delta
	load_elf_phdrs                               137     130      -7

Link: http://lkml.kernel.org/r/20190204202715.GA27482@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:32:01 -08:00
Roman Penyaev
a218cc4914 epoll: use rwlock in order to reduce ep_poll_callback() contention
The goal of this patch is to reduce contention of ep_poll_callback()
which can be called concurrently from different CPUs in case of high
events rates and many fds per epoll.  Problem can be very well
reproduced by generating events (write to pipe or eventfd) from many
threads, while consumer thread does polling.  In other words this patch
increases the bandwidth of events which can be delivered from sources to
the poller by adding poll items in a lockless way to the list.

The main change is in replacement of the spinlock with a rwlock, which
is taken on read in ep_poll_callback(), and then by adding poll items to
the tail of the list using xchg atomic instruction.  Write lock is taken
everywhere else in order to stop list modifications and guarantee that
list updates are fully completed (I assume that write side of a rwlock
does not starve, it seems qrwlock implementation has these guarantees).

The following are some microbenchmark results based on the test [1]
which starts threads which generate N events each.  The test ends when
all events are successfully fetched by the poller thread:

 spinlock
 ========

 threads  events/ms  run-time ms
       8       6402        12495
      16       7045        22709
      32       7395        43268

 rwlock + xchg
 =============

 threads  events/ms  run-time ms
       8      10038         7969
      16      12178        13138
      32      13223        24199

According to the results bandwidth of delivered events is significantly
increased, thus execution time is reduced.

This patch was tested with different sort of microbenchmarks and
artificial delays (e.g.  "udelay(get_random_int() & 0xff)") introduced
in kernel on paths where items are added to lists.

[1] https://github.com/rouming/test-tools/blob/master/stress-epoll.c

Link: http://lkml.kernel.org/r/20190103150104.17128-5-rpenyaev@suse.de
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:32:01 -08:00
Roman Penyaev
c3e320b615 epoll: unify awaking of wakeup source on ep_poll_callback() path
Original comment "Activate ep->ws since epi->ws may get deactivated at
any time" indeed sounds loud, but it is incorrect, because the path
where we check epi->ws is a path where insert to ovflist happens, i.e.
ep_scan_ready_list() has taken ep->mtx and waits for this callback to
finish, thus ep_modify() (which unregisters wakeup source) waits for
ep_scan_ready_list().

Here in this patch I simply call ep_pm_stay_awake_rcu(), which is a bit
extra for this path (indirectly protected by main ep->mtx, so even rcu
is not needed), but I do not want to create another naked
__ep_pm_stay_awake() variant only for this particular case, so rcu variant
is just better for all the cases.

Link: http://lkml.kernel.org/r/20190103150104.17128-4-rpenyaev@suse.de
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:32:01 -08:00
Roman Penyaev
c141175d01 epoll: make sure all elements in ready list are in FIFO order
Patch series "use rwlock in order to reduce ep_poll_callback()
contention", v3.

The last patch targets the contention problem in ep_poll_callback(),
which can be very well reproduced by generating events (write to pipe or
eventfd) from many threads, while consumer thread does polling.

The following are some microbenchmark results based on the test [1]
which starts threads which generate N events each.  The test ends when
all events are successfully fetched by the poller thread:

 spinlock
 ========

 threads  events/ms  run-time ms
       8       6402        12495
      16       7045        22709
      32       7395        43268

 rwlock + xchg
 =============

 threads  events/ms  run-time ms
       8      10038         7969
      16      12178        13138
      32      13223        24199

According to the results bandwidth of delivered events is significantly
increased, thus execution time is reduced.

This patch (of 4):

All coming events are stored in FIFO order and this is also should be
applicable to ->ovflist, which originally is stack, i.e.  LIFO.

Thus to keep correct FIFO order ->ovflist should reversed by adding
elements to the head of the read list but not to the tail.

Link: http://lkml.kernel.org/r/20190103150104.17128-2-rpenyaev@suse.de
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:32:01 -08:00
Rasmus Villemoes
afe1a715e8 btrfs: implement btrfs_debug* in terms of helper macro
First, the btrfs_debug macros open-code (one possible definition of)
DYNAMIC_DEBUG_BRANCH, so they don't benefit from the CONFIG_JUMP_LABEL
optimization.

Second, a planned change of struct _ddebug (to reduce its size on 64 bit
machines) requires that all descriptors in a translation unit use
distinct identifiers.

Using the new _dynamic_func_call_no_desc helper macro from
dynamic_debug.h takes care of both of these.  No functional change.

Link: http://lkml.kernel.org/r/20190212214150.4807-12-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:32:00 -08:00
Rasmus Villemoes
f1fffbd447 linux/fs.h: move member alignment check next to definition of struct filename
Instead of doing this compile-time check in some slightly arbitrary user
of struct filename, put it next to the definition.

Link: http://lkml.kernel.org/r/20190208203015.29702-3-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-07 18:31:59 -08:00
Linus Torvalds
be37f21a08 audit/stable-5.1 PR 20190305
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAlx+8ZgUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXOlDhAAiGlirQ9syyG2fYzaARZZ2QoU/GGD
 PSAeiNmP3jvJzXArCvugRCw+YSNDdQOBM3SrLQC+cM0MAIDRYXN0NdcrsbTchlMA
 51Fx1egZ9Fyj+Ehgida3muh2lRUy7DQwMCL6tAVqwz7vYkSTGDUf+MlYqOqXDka5
 74pEExOS3Jdi7560BsE8b6QoW9JIJqEJnirXGkG9o2qC0oFHCR6PKxIyQ7TJrLR1
 F23aFTqLTH1nbPUQjnox2PTf13iQVh4j2gwzd+9c9KBfxoGSge3dmxId7BJHy2aG
 M27fPdCYTNZAGWpPVujsCPAh1WPQ9NQqg3mA9+g14PEbiLqPcqU+kWmnDU7T7bEw
 Qx0kt6Y8GiknwCqq8pDbKYclgRmOjSGdfutzd0z8uDpbaeunS4/NqnDb/FUaDVcr
 jA4d6ep7qEgHpYbL8KgOeZCexfaTfz6mcwRWNq3Uu9cLZbZqSSQ7PXolMADHvoRs
 LS7VH2jcP7q4p4GWmdfjv67xyUUo9HG5HHX74h5pLfQSYXiBWo4ht0UOAzX/6EcE
 CJNHAFHv+OanI5Rg/6JQ8b3/bJYxzAJVyLZpCuMtlKk6lYBGNeADk9BezEDIYsm8
 tSe4/GqqyR9+Qz8rSdpAZ0KKkfqS535IcHUPUJau7Bzg1xqSEP5gzZN6QsjdXg0+
 5wFFfdFICTfJFXo=
 =57/1
 -----END PGP SIGNATURE-----

Merge tag 'audit-pr-20190305' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit

Pull audit updates from Paul Moore:
 "A lucky 13 audit patches for v5.1.

  Despite the rather large diffstat, most of the changes are from two
  bug fix patches that move code from one Kconfig option to another.

  Beyond that bit of churn, the remaining changes are largely cleanups
  and bug-fixes as we slowly march towards container auditing. It isn't
  all boring though, we do have a couple of new things: file
  capabilities v3 support, and expanded support for filtering on
  filesystems to solve problems with remote filesystems.

  All changes pass the audit-testsuite.  Please merge for v5.1"

* tag 'audit-pr-20190305' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: mark expected switch fall-through
  audit: hide auditsc_get_stamp and audit_serial prototypes
  audit: join tty records to their syscall
  audit: remove audit_context when CONFIG_ AUDIT and not AUDITSYSCALL
  audit: remove unused actx param from audit_rule_match
  audit: ignore fcaps on umount
  audit: clean up AUDITSYSCALL prototypes and stubs
  audit: more filter PATH records keyed on filesystem magic
  audit: add support for fcaps v3
  audit: move loginuid and sessionid from CONFIG_AUDITSYSCALL to CONFIG_AUDIT
  audit: add syscall information to CONFIG_CHANGE records
  audit: hand taken context to audit_kill_trees for syscall logging
  audit: give a clue what CONFIG_CHANGE op was involved
2019-03-07 12:20:11 -08:00
Linus Torvalds
ae5906ceee Merge branch 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:

 - Extend LSM stacking to allow sharing of cred, file, ipc, inode, and
   task blobs. This paves the way for more full-featured LSMs to be
   merged, and is specifically aimed at LandLock and SARA LSMs. This
   work is from Casey and Kees.

 - There's a new LSM from Micah Morton: "SafeSetID gates the setid
   family of syscalls to restrict UID/GID transitions from a given
   UID/GID to only those approved by a system-wide whitelist." This
   feature is currently shipping in ChromeOS.

* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (62 commits)
  keys: fix missing __user in KEYCTL_PKEY_QUERY
  LSM: Update list of SECURITYFS users in Kconfig
  LSM: Ignore "security=" when "lsm=" is specified
  LSM: Update function documentation for cap_capable
  security: mark expected switch fall-throughs and add a missing break
  tomoyo: Bump version.
  LSM: fix return value check in safesetid_init_securityfs()
  LSM: SafeSetID: add selftest
  LSM: SafeSetID: remove unused include
  LSM: SafeSetID: 'depend' on CONFIG_SECURITY
  LSM: Add 'name' field for SafeSetID in DEFINE_LSM
  LSM: add SafeSetID module that gates setid calls
  LSM: add SafeSetID module that gates setid calls
  tomoyo: Allow multiple use_group lines.
  tomoyo: Coding style fix.
  tomoyo: Swicth from cred->security to task_struct->security.
  security: keys: annotate implicit fall throughs
  security: keys: annotate implicit fall throughs
  security: keys: annotate implicit fall through
  capabilities:: annotate implicit fall through
  ...
2019-03-07 11:44:01 -08:00
Linus Torvalds
9e1fd794cb Changes for Linux 5.1:
- Fix online fsck to handle inode btrees correctly on 64k block
   filesystems.
 - Teach online fsck to check directory and attribute names for invalid
   characters.
 - Miscellanous fixes for online fsck.
 - Introduce a new panic mask so that we can halt immediately on
   metadata corruption (for debugging purposes)
 - Fix a block mapping race during writeback.
 - Cache unlinked inode list backrefs in memory to speed up list
   processing.
 - Separate the bnobt/cntbt and inobt/finobt buffer verifiers so that we
   can detect crosslinked btrees.
 - Refactor magic number verification so that we can standardize it.
 - Strengthen ondisk metadata structure offset build time verification.
 - Fix a memory corruption problem in the listxattr code.
 - Fix a shutdown problem during log recovery due to unreserved finobt
   expansion.
 - Fix a referential integrity problem where O_TMPFILE inodes were put on
   the unlinked list with nlink > 0 which would cause asserts during log
   recovery if the system went down immediately.
 - Refactor the delayed allocation allocator to be more clever about the
   possibility that its mapping might be stale.
 - Various fixes to the copy on write mechanism.
 - Make CoW preallocation suitable for use even with writes that wouldn't
   otherwise require it.
 - Refactor an internal API.
 - Fix some statx implementation bugs.
 - Fix miscellaneous compiler and static checker complaints.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAlx5ZaIACgkQ+H93GTRK
 tOvZnhAApQ7bEsJIovMhW36yh/pXef9iKk2xAv6Kwn9jWEysQH+vlBvwEnaJTb0E
 8WBYm0Jv1DK8A6luSLmWbCIWB+RMkwhufXKadaTBtL8ySWq8uf776e9dVQflRyNU
 pN5k+JwQEfVDw8beAkUhr8yrZODv6iQi7/e2O0ARuf6CeNvX5ZR7OTjPdW3vX/zu
 F0t5UOegd2kGq+kkmIfDpAlQ8ju5U6P8sjImbXbjiTtSBydqkadgx3rCfa7MdD7u
 Y3Zauzba9PmJyJQ71JNsXgle58Ojq57LwWsRL/XEufy5B1upZsDzfDYTlAsDIkPJ
 pcG3YGPuGrBG/VX12XHmHqxt6DeW3S+GMVVxx7xBpSVDiSGeOazugLrAXk83NVzo
 eaUM96VVJO1lZArLxieZ7EBcuuNjW4PYYCOmUobGz/kxAzjubJU3dRMRLHiG5A1H
 TB2p0WlIP8cSxboF+SK8mhBmYDa1w16TCHQ6d6i9IFqcrmSc0JUvE3gy1UJzHhMb
 FESHasLTz9NTRhnCY3QjOYcT9Sa/s22+46+yZ8xBADG14N00dsYnCC5bbR/ALI09
 9RNawcDvzN6p9pcJMuRImWlXx5dpNjIAr/bEp+xZK1tnsHg8HKHub61e2x6PhmH8
 COJTErXV01IDRSVdQv6rFSE38/FACYppjzNyUdE7VydyKSoxBsM=
 =BAFq
 -----END PGP SIGNATURE-----

Merge tag 'xfs-5.1-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs updates from Darrick Wong:
 "Here are a number of new features and bug fixes for 5.1

  They've undergone a week's worth of fstesting and merge cleanly with
  master as of this morning

  Most of the changes center on improving metadata validation and fixing
  problems with online fsck, though there's also a new cache to speed up
  unlinked inode handling and cleanup of the copy on write code in
  preparation for future features

  Changes for Linux 5.1:

   - Fix online fsck to handle inode btrees correctly on 64k block
     filesystems

   - Teach online fsck to check directory and attribute names for
     invalid characters

   - Miscellanous fixes for online fsck

   - Introduce a new panic mask so that we can halt immediately on
     metadata corruption (for debugging purposes)

   - Fix a block mapping race during writeback

   - Cache unlinked inode list backrefs in memory to speed up list
     processing

   - Separate the bnobt/cntbt and inobt/finobt buffer verifiers so that
     we can detect crosslinked btrees

   - Refactor magic number verification so that we can standardize it

   - Strengthen ondisk metadata structure offset build time verification

   - Fix a memory corruption problem in the listxattr code

   - Fix a shutdown problem during log recovery due to unreserved finobt
     expansion

   - Fix a referential integrity problem where O_TMPFILE inodes were put
     on the unlinked list with nlink > 0 which would cause asserts
     during log recovery if the system went down immediately

   - Refactor the delayed allocation allocator to be more clever about
     the possibility that its mapping might be stale

   - Various fixes to the copy on write mechanism

   - Make CoW preallocation suitable for use even with writes that
     wouldn't otherwise require it

   - Refactor an internal API

   - Fix some statx implementation bugs

   - Fix miscellaneous compiler and static checker complaints"

* tag 'xfs-5.1-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (70 commits)
  xfs: fix reporting supported extra file attributes for statx()
  xfs: fix backwards endian conversion in scrub
  xfs: fix uninitialized error variables
  xfs: rework breaking of shared extents in xfs_file_iomap_begin
  xfs: don't pass iomap flags to xfs_reflink_allocate_cow
  xfs: fix uninitialized error variable
  xfs: introduce an always_cow mode
  xfs: report IOMAP_F_SHARED from xfs_file_iomap_begin_delay
  xfs: make COW fork unwritten extent conversions more robust
  xfs: merge COW handling into xfs_file_iomap_begin_delay
  xfs: also truncate holes covered by COW blocks
  xfs: don't use delalloc extents for COW on files with extsize hints
  xfs: fix SEEK_DATA for speculative COW fork preallocation
  xfs: make xfs_bmbt_to_iomap more useful
  xfs: fix xfs_buf magic number endian checks
  xfs: retry COW fork delalloc conversion when no extent was found
  xfs: remove the truncate short cut in xfs_map_blocks
  xfs: move xfs_iomap_write_allocate to xfs_aops.c
  xfs: move stat accounting to xfs_bmapi_convert_delalloc
  xfs: move transaction handling to xfs_bmapi_convert_delalloc
  ..
2019-03-07 09:38:51 -08:00
Linus Torvalds
b1e243957e for-5.1-part1-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAlx9czQACgkQxWXV+ddt
 WDvC9w/8CxJf1/eZBqb+b+aA38kgZhoaNixMud/IW/IFmIlicX0PoDxk6dh1ZTA+
 3uej/7fyfwjNCVvtrPVVxdT8zhZgyJouHrbhG1PlDWtmTEV2VqV5pBG1xQtCwmZy
 oinQI5oYYM5Le5EXxRGH8TQs6Z3tFuLx2kcrVWBLFKoZ2kZBZxe6KykGF9izve4a
 sVjtOL1CEL1e00vrNLzUmch8qss9Cu0i3qd3k8UANp3SgKIaOkJt4S/HeEcLfy5J
 kf6hVKlgPDuakVtAJKyhbLVQsfHVNkfiyvplta9lDot/iJchJITTRkadP6LblVeo
 knl8V+VO9kzQUvGauxtu66Q3DJ/7mqbzHUwPISetdKCV9ZXkuPFHnu0AEP577mrx
 e1JAPA/a8lF3up5QhqIb0uzH3sczOd8nNN/b1Xnxl7Kogyl8SUjhmX3FFy88borj
 /8Ptv/fFMQZs9IJ0QWlkh5TKRXAtSNAzVy2FpkvLaO0k0gJKQjyJuTKV5ezv/PGU
 +4m5kDtfpyz//KAOZxq4lERj4EMIEDhHhNbA8Qqmdeoj7oaKZ+gW57enOXohCTbi
 gVE6xDr2u4oQ85j3JuQo5W5mZA4uza35Gh4t43n5akdrrkLFVLW584hDxShGx9uS
 B0maToGbzOdGJTZXZ2SLHZ5Da14Lzb/TooCufF8GMAISb99vbjw=
 =D9zc
 -----END PGP SIGNATURE-----

Merge tag 'for-5.1-part1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs updates from David Sterba:
 "This contains usual mix of new features, core changes and fixes; full
  list below. I'm planning second pull request, with a few more fixes
  that arrived recently but too close to merge window, will send it next
  week.

  New features:

   - support zstd compression levels

   - new ioctl to unregister a device from the module (ie. reverse of
     device scan)

   - scrub prints a message to log when it's about to start or finish

  Core changes:

   - qgroups can now skip part of a tree that does not get updated
     during relocation, because this does not affect the quota
     accounting, estimated speedup in run time is about 20%

   - the compression workspace management had to be enhanced due to zstd
     requirements

   - various enospc fixes, when there's high fragmentation the
     over-reservation can cause ENOSPC that might not happen after a
     flush, in such cases try to wait if the situation improves

  Fixes:

   - various ioctls could overwrite previous return value if
     copy_to_user fails, fix this so the original error is reported

   - more reclaim vs GFP_KERNEL fixes

   - other cleanups and refactoring

   - fix a (valid) lockdep warning in a test when device replace is
     destroying worker threads

   - make qgroup async transaction commit more aggressive, this avoids
     some 'quota limit reached' errors if there are not enough data to
     trigger transaction in order to flush

   - fix deadlock between snapshot deletion and quotas when backref
     walking is called from context that already holds the same locks

   - fsync fixes:
      - fix fsync after succession of renames of different files
      - fix fsync after succession of renames and unlink/rmdir"

* tag 'for-5.1-part1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (92 commits)
  btrfs: Remove unnecessary casts in btrfs_read_root_item
  Btrfs: remove assertion when searching for a key in a node/leaf
  Btrfs: add missing error handling after doing leaf/node binary search
  btrfs: drop the lock on error in btrfs_dev_replace_cancel
  btrfs: ensure that a DUP or RAID1 block group has exactly two stripes
  btrfs: init csum_list before possible free
  Btrfs: remove no longer needed range length checks for deduplication
  Btrfs: fix fsync after succession of renames and unlink/rmdir
  Btrfs: fix fsync after succession of renames of different files
  btrfs: honor path->skip_locking in backref code
  btrfs: qgroup: Make qgroup async transaction commit more aggressive
  btrfs: qgroup: Move reserved data accounting from btrfs_delayed_ref_head to btrfs_qgroup_extent_record
  btrfs: scrub: remove unused nocow worker pointer
  btrfs: scrub: add assertions for worker pointers
  btrfs: scrub: convert scrub_workers_refcnt to refcount_t
  btrfs: scrub: add scrub_lock lockdep check in scrub_workers_get
  btrfs: scrub: fix circular locking dependency warning
  btrfs: fix comment its device list mutex not volume lock
  btrfs: extent_io: Kill the forward declaration of flush_write_bio
  btrfs: Fix grossly misleading argument names in extent io search
  ...
2019-03-07 09:07:30 -08:00
Linus Torvalds
0556161ff9 \n
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAlx5SzMACgkQnJ2qBz9k
 QNnP0AgAl9HDtk436P4QPPFhdeXBB6uRTYU8wgZSropXMxoyUzqZotWkeUqUusHs
 I8BAJeQojZeKUnMwET1/RA+dMLsgAlMcxkM3+3eDCLF9wh/+wO2B2G3ywh8KMVed
 Sa3C4V/NZvZzAossoGDV/yWmK+ZYrrW8l/DM3LU54GV1NfAL+Khn4FNwtgWiYiP5
 S4RkRflzwhIEZJSZByMlCLcsrHl/ehtMJuR1opUPY1c0CY8iAGcIobSSzVFqv4f5
 ScRB56rnXqTt6CBGBcDIkWxWqEE9XuTdAn1AVMC7327UezyFNocXUZaqDzJcGcR/
 rM3sf+seZftbA4nid8dIhSRoqAf4Yw==
 =/DQr
 -----END PGP SIGNATURE-----

Merge tag 'fsnotify_for_v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

Pull fanotify updates from Jan Kara:
 "Support for fanotify directory events and changes to make waiting for
  fanotify permission event response killable"

* tag 'fsnotify_for_v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (25 commits)
  fanotify: Make waits for fanotify events only killable
  fanotify: Use interruptible wait when waiting for permission events
  fanotify: Track permission event state
  fanotify: Simplify cleaning of access_list
  fsnotify: Create function to remove event from notification list
  fanotify: Move locking inside get_one_event()
  fanotify: Fold dequeue_event() into process_access_response()
  fanotify: Select EXPORTFS
  fanotify: report FAN_ONDIR to listener with FAN_REPORT_FID
  fanotify: add support for create/attrib/move/delete events
  fanotify: support events with data type FSNOTIFY_EVENT_INODE
  fanotify: check FS_ISDIR flag instead of d_is_dir()
  fsnotify: report FS_ISDIR flag with MOVE_SELF and DELETE_SELF events
  fanotify: use vfs_get_fsid() helper instead of vfs_statfs()
  vfs: add vfs_get_fsid() helper
  fanotify: cache fsid in fsnotify_mark_connector
  fanotify: enable FAN_REPORT_FID init flag
  fanotify: copy event fid info to user
  fanotify: encode file identifier for FAN_REPORT_FID
  fanotify: open code fill_event_metadata()
  ...
2019-03-07 09:03:38 -08:00
Linus Torvalds
a9913f23f3 \n
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAlx5SeAACgkQnJ2qBz9k
 QNlzLAf/c+1o6fd4mH9uBMqEHwo+g7cKcr76j00h60bZpMJ0N/k91o8KtUKDixLJ
 wG1o3FtaFyOpKXInjQOZZ83XQybjpDDFO67pCss/OYZ9bHtWM6ZfrYQzpxpIXu2E
 7/FFjZV7MlugmnqJbvYRvMr2Tx7IrqOeWZ0ZIUMRnghuBarLpbiOqFaTbGlqS8e1
 haFRhbxv0sA44YN9N40XVpg6P+cRsxJ4cHDSyQn4+X9CoYdKZ69utXyiiaV2L/Gc
 iNYn2fkh7IDkgxF8imwHSLhvvAVangWWphhTX/XVnCPq0FKTRw9e2tRdt77IlDlX
 w/GCHKnXaM6GnGDj4t83KV4yrdXGsQ==
 =xrvx
 -----END PGP SIGNATURE-----

Merge tag 'fs_for_v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

Pull ext2 and udf fixes from Jan Kara:
 "A couple of fixes for udf and ext2. Namely:

   - fix making ext2 mountable (again) with 64k blocksize

   - fix for ext2 statx(2) handling

   - fix for udf handling of corrupted filesystem so that it doesn't get
     corrupted even further

   - couple smaller ext2 and udf cleanups"

* tag 'fs_for_v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Drop pointless check from udf_sync_fs()
  ext2: support statx syscall
  udf: disallow RW mount without valid integrity descriptor
  udf: finalize integrity descriptor before writeback
  udf: factor out LVID finalization for reuse
  ext2: Fix underflow in ext2_max_size()
  ext2: Fix a typo in comment
  ext2: Remove redundant check for finding no group
  ext2: Annotate implicit fall through in __ext2_truncate_blocks
  ext2: Set superblock revision when enabling xattr feature
  ext2: Remove redundant check on s_inode_size
  ext2: set proper return code
2019-03-07 09:01:33 -08:00
Linus Torvalds
b39a07a5e0 \n
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAlx5R3AACgkQnJ2qBz9k
 QNlrLQf/f8puq1PgwvxuxnZATtKBWA0O84YCkIvf18LV9GsOIaYGBVOhpd3CNZ0u
 WFKKaWxmrWlHtjKb43mAnZbGDLBE7uJmBe3CweIxg/Dgl3i0zvcI1Sz2vgyD3g+Q
 cSW8KF8mmG53ltSpQV2NzQOSwtAGuBGfJt9b9aZ25Xl+Tpoq3PlRGNfA8oyVsL+f
 iZeiJ9UxB4eRBhO0fEqhpyW1ZvNLoHF1U1qhJaVLK85tBnAAGvRQtlP1n4gFNNXP
 /+Hhb0khunkhH5uXrXxYpxp5AX8mciqT28d0PPaFUxHIa4PDtgMDZoTkIjgFCusk
 SqiL6TkPOovAG/27rBTH14L2ZMf7bw==
 =8mdR
 -----END PGP SIGNATURE-----

Merge tag 'dtype_for_v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

Pull dtype handling cleanups from Jan Kara:
 "A reworked dtype cleanup patches based on your feedback to the
  previous version of these.

  Again the series includes only the generic code and ext2 cleanup as a
  sample. The plan is to push cleanups for other filesystems separately
  through respective trees once the generic code lands to reduce the
  number of conflicts"

* tag 'dtype_for_v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2: use common file type conversion
  fs: common implementation of file type
2019-03-07 08:23:17 -08:00
Enrico Weigelt, metux IT consult
50cfad780b fs: cifs: Kconfig: pedantic formatting
Formatting of Kconfig files doesn't look so pretty, so just
take damp cloth and clean it up.

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-06 21:55:12 -06:00
Linus Torvalds
e431f2d74e Driver core patches for 5.1-rc1
Here is the big driver core patchset for 5.1-rc1
 
 More patches than "normal" here this merge window, due to some work in
 the driver core by Alexander Duyck to rework the async probe
 functionality to work better for a number of devices, and independant
 work from Rafael for the device link functionality to make it work
 "correctly".
 
 Also in here is:
 	- lots of BUS_ATTR() removals, the macro is about to go away
 	- firmware test fixups
 	- ihex fixups and simplification
 	- component additions (also includes i915 patches)
 	- lots of minor coding style fixups and cleanups.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXH+euQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynyTgCfbV8CLums843sBnT8NnWrTMTdTCcAn1K4re0m
 ep8g+6oRLxJy414hogxQ
 =bLs2
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the big driver core patchset for 5.1-rc1

  More patches than "normal" here this merge window, due to some work in
  the driver core by Alexander Duyck to rework the async probe
  functionality to work better for a number of devices, and independant
  work from Rafael for the device link functionality to make it work
  "correctly".

  Also in here is:

   - lots of BUS_ATTR() removals, the macro is about to go away

   - firmware test fixups

   - ihex fixups and simplification

   - component additions (also includes i915 patches)

   - lots of minor coding style fixups and cleanups.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits)
  driver core: platform: remove misleading err_alloc label
  platform: set of_node in platform_device_register_full()
  firmware: hardcode the debug message for -ENOENT
  driver core: Add missing description of new struct device_link field
  driver core: Fix PM-runtime for links added during consumer probe
  drivers/component: kerneldoc polish
  async: Add cmdline option to specify drivers to be async probed
  driver core: Fix possible supplier PM-usage counter imbalance
  PM-runtime: Fix __pm_runtime_set_status() race with runtime resume
  driver: platform: Support parsing GpioInt 0 in platform_get_irq()
  selftests: firmware: fix verify_reqs() return value
  Revert "selftests: firmware: remove use of non-standard diff -Z option"
  Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config"
  device: Fix comment for driver_data in struct device
  kernfs: Allocating memory for kernfs_iattrs with kmem_cache.
  sysfs: remove unused include of kernfs-internal.h
  driver core: Postpone DMA tear-down until after devres release
  driver core: Document limitation related to DL_FLAG_RPM_ACTIVE
  PM-runtime: Take suppliers into account in __pm_runtime_set_status()
  device.h: Add __cold to dev_<level> logging functions
  ...
2019-03-06 14:52:48 -08:00
Jens Axboe
31b5151064 io_uring: allow workqueue item to handle multiple buffered requests
Right now we punt any buffered request that ends up triggering an
-EAGAIN to an async workqueue. This works fine in terms of providing
async execution of them, but it also can create quite a lot of work
queue items. For sequentially buffered IO, it's advantageous to
serialize the issue of them. For reads, the first one will trigger a
read-ahead, and subsequent request merely end up waiting on later pages
to complete. For writes, devices usually respond better to streamed
sequential writes.

Add state to track the last buffered request we punted to a work queue,
and if the next one is sequential to the previous, attempt to get the
previous work item to handle it. We limit the number of sequential
add-ons to the a multiple (8) of the max read-ahead size of the file.
This should be a good number for both reads and wries, as it defines the
max IO size the device can do directly.

This drastically cuts down on the number of context switches we need to
handle buffered sequential IO, and a basic test case of copying a big
file with io_uring sees a 5x speedup.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-06 13:00:16 -07:00
Jens Axboe
221c5eb233 io_uring: add support for IORING_OP_POLL
This is basically a direct port of bfe4037e72, which implements a
one-shot poll command through aio. Description below is based on that
commit as well. However, instead of adding a POLL command and relying
on io_cancel(2) to remove it, we mimic the epoll(2) interface of
having a command to add a poll notification, IORING_OP_POLL_ADD,
and one to remove it again, IORING_OP_POLL_REMOVE.

To poll for a file descriptor the application should submit an sqe of
type IORING_OP_POLL. It will poll the fd for the events specified in the
poll_events field.

Unlike poll or epoll without EPOLLONESHOT this interface always works in
one shot mode, that is once the sqe is completed, it will have to be
resubmitted.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Based-on-code-from: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-06 13:00:12 -07:00
Linus Torvalds
8dcd175bc3 Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:

 - a few misc things

 - ocfs2 updates

 - most of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (159 commits)
  tools/testing/selftests/proc/proc-self-syscall.c: remove duplicate include
  proc: more robust bulk read test
  proc: test /proc/*/maps, smaps, smaps_rollup, statm
  proc: use seq_puts() everywhere
  proc: read kernel cpu stat pointer once
  proc: remove unused argument in proc_pid_lookup()
  fs/proc/thread_self.c: code cleanup for proc_setup_thread_self()
  fs/proc/self.c: code cleanup for proc_setup_self()
  proc: return exit code 4 for skipped tests
  mm,mremap: bail out earlier in mremap_to under map pressure
  mm/sparse: fix a bad comparison
  mm/memory.c: do_fault: avoid usage of stale vm_area_struct
  writeback: fix inode cgroup switching comment
  mm/huge_memory.c: fix "orig_pud" set but not used
  mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC
  mm/memcontrol.c: fix bad line in comment
  mm/cma.c: cma_declare_contiguous: correct err handling
  mm/page_ext.c: fix an imbalance with kmemleak
  mm/compaction: pass pgdat to too_many_isolated() instead of zone
  mm: remove zone_lru_lock() function, access ->lru_lock directly
  ...
2019-03-06 10:31:36 -08:00
Linus Torvalds
45802da05e Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - refcount conversions

   - Solve the rq->leaf_cfs_rq_list can of worms for real.

   - improve power-aware scheduling

   - add sysctl knob for Energy Aware Scheduling

   - documentation updates

   - misc other changes"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  kthread: Do not use TIMER_IRQSAFE
  kthread: Convert worker lock to raw spinlock
  sched/fair: Use non-atomic cpumask_{set,clear}_cpu()
  sched/fair: Remove unused 'sd' parameter from select_idle_smt()
  sched/wait: Use freezable_schedule() when possible
  sched/fair: Prune, fix and simplify the nohz_balancer_kick() comment block
  sched/fair: Explain LLC nohz kick condition
  sched/fair: Simplify nohz_balancer_kick()
  sched/topology: Fix percpu data types in struct sd_data & struct s_data
  sched/fair: Simplify post_init_entity_util_avg() by calling it with a task_struct pointer argument
  sched/fair: Fix O(nr_cgroups) in the load balancing path
  sched/fair: Optimize update_blocked_averages()
  sched/fair: Fix insertion in rq->leaf_cfs_rq_list
  sched/fair: Add tmp_alone_branch assertion
  sched/core: Use READ_ONCE()/WRITE_ONCE() in move_queued_task()/task_rq_lock()
  sched/debug: Initialize sd_sysctl_cpus if !CONFIG_CPUMASK_OFFSTACK
  sched/pelt: Skip updating util_est when utilization is higher than CPU's capacity
  sched/fair: Update scale invariance of PELT
  sched/fair: Move the rq_of() helper function
  sched/core: Convert task_struct.stack_refcount to refcount_t
  ...
2019-03-06 08:14:05 -08:00
Linus Torvalds
3478588b51 Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
 "The biggest part of this tree is the new auto-generated atomics API
  wrappers by Mark Rutland.

  The primary motivation was to allow instrumentation without uglifying
  the primary source code.

  The linecount increase comes from adding the auto-generated files to
  the Git space as well:

    include/asm-generic/atomic-instrumented.h     | 1689 ++++++++++++++++--
    include/asm-generic/atomic-long.h             | 1174 ++++++++++---
    include/linux/atomic-fallback.h               | 2295 +++++++++++++++++++++++++
    include/linux/atomic.h                        | 1241 +------------

  I preferred this approach, so that the full call stack of the (already
  complex) locking APIs is still fully visible in 'git grep'.

  But if this is excessive we could certainly hide them.

  There's a separate build-time mechanism to determine whether the
  headers are out of date (they should never be stale if we do our job
  right).

  Anyway, nothing from this should be visible to regular kernel
  developers.

  Other changes:

   - Add support for dynamic keys, which removes a source of false
     positives in the workqueue code, among other things (Bart Van
     Assche)

   - Updates to tools/memory-model (Andrea Parri, Paul E. McKenney)

   - qspinlock, wake_q and lockdep micro-optimizations (Waiman Long)

   - misc other updates and enhancements"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
  locking/lockdep: Shrink struct lock_class_key
  locking/lockdep: Add module_param to enable consistency checks
  lockdep/lib/tests: Test dynamic key registration
  lockdep/lib/tests: Fix run_tests.sh
  kernel/workqueue: Use dynamic lockdep keys for workqueues
  locking/lockdep: Add support for dynamic keys
  locking/lockdep: Verify whether lock objects are small enough to be used as class keys
  locking/lockdep: Check data structure consistency
  locking/lockdep: Reuse lock chains that have been freed
  locking/lockdep: Fix a comment in add_chain_cache()
  locking/lockdep: Introduce lockdep_next_lockchain() and lock_chain_count()
  locking/lockdep: Reuse list entries that are no longer in use
  locking/lockdep: Free lock classes that are no longer in use
  locking/lockdep: Update two outdated comments
  locking/lockdep: Make it easy to detect whether or not inside a selftest
  locking/lockdep: Split lockdep_free_key_range() and lockdep_reset_lock()
  locking/lockdep: Initialize the locks_before and locks_after lists earlier
  locking/lockdep: Make zap_class() remove all matching lock order entries
  locking/lockdep: Reorder struct lock_class members
  locking/lockdep: Avoid that add_chain_cache() adds an invalid chain to the cache
  ...
2019-03-06 07:17:17 -08:00
Yihao Wu
dd838821f0 nfsd: fix wrong check in write_v4_end_grace()
Commit 62a063b8e7 "nfsd4: fix crash on writing v4_end_grace before
nfsd startup" is trying to fix a NULL dereference issue, but it
mistakenly checks if the nfsd server is started. So fix it.

Fixes: 62a063b8e7 "nfsd4: fix crash on writing v4_end_grace before nfsd startup"
Cc: stable@vger.kernel.org
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Yihao Wu <wuyihao@linux.alibaba.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-03-06 09:58:20 -05:00
Tim Smith
7c03e756b4 gfs2: Fix an incorrect gfs2_assert()
When updating the inode information after a change in allocation,
convert the change into the same units as the inode's i_blocks count
before comparing it in an assertion.

Also, change the comparison so that it is still possible to set i_blocks
to zero by adding -i_blocks, something that was previously only possible
because of the difference in units.

Signed-off-by: Tim Smith <tim.smith@citrix.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2019-03-06 07:00:43 -07:00
Alexey Dobriyan
08b5577513 proc: use seq_puts() everywhere
seq_printf() without format specifiers == faster seq_puts()

Link: http://lkml.kernel.org/r/20190114200545.GC9680@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:22 -08:00
Alexey Dobriyan
5713f35c05 proc: read kernel cpu stat pointer once
Help gcc generate better code:

	$ ./scripts/bloat-o-meter ../vmlinux-000 ../vmlinux-001
	add/remove: 2/2 grow/shrink: 0/1 up/down: 92/-142 (-50)
	Function                                     old     new   delta
	get_iowait_time.isra                           -      46     +46
	get_idle_time.isra                             -      46     +46
	show_stat                                   1489    1477     -12
	get_iowait_time                               65       -     -65
	get_idle_time                                 65       -     -65

Link: http://lkml.kernel.org/r/20190114195907.GA9680@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:21 -08:00
Zhikang Zhang
867aaccf1f proc: remove unused argument in proc_pid_lookup()
[adobriyan@gmail.com: delete "extern" from prototype]
Link: http://lkml.kernel.org/r/20190114195635.GA9372@avx2
Signed-off-by: Zhikang Zhang <zhangzhikang1@huawei.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:21 -08:00
Chengguang Xu
45f68ab502 fs/proc/thread_self.c: code cleanup for proc_setup_thread_self()
Remove unnecessary ERR_PTR()/PTR_ERR() cast in proc_setup_thread_self().

Link: http://lkml.kernel.org/r/20190124030150.8472-2-cgxu519@gmx.com
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:21 -08:00
Chengguang Xu
756ca74c7f fs/proc/self.c: code cleanup for proc_setup_self()
Remove unnecessary ERR_PTR()/PTR_ERR() cast in proc_setup_self().

Link: http://lkml.kernel.org/r/20190124030150.8472-1-cgxu519@gmx.com
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:21 -08:00
Joel Fernandes (Google)
ab3948f58f mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd
Android uses ashmem for sharing memory regions.  We are looking forward
to migrating all usecases of ashmem to memfd so that we can possibly
remove the ashmem driver in the future from staging while also
benefiting from using memfd and contributing to it.  Note staging
drivers are also not ABI and generally can be removed at anytime.

One of the main usecases Android has is the ability to create a region
and mmap it as writeable, then add protection against making any
"future" writes while keeping the existing already mmap'ed
writeable-region active.  This allows us to implement a usecase where
receivers of the shared memory buffer can get a read-only view, while
the sender continues to write to the buffer.  See CursorWindow
documentation in Android for more details:

  https://developer.android.com/reference/android/database/CursorWindow

This usecase cannot be implemented with the existing F_SEAL_WRITE seal.
To support the usecase, this patch adds a new F_SEAL_FUTURE_WRITE seal
which prevents any future mmap and write syscalls from succeeding while
keeping the existing mmap active.

A better way to do F_SEAL_FUTURE_WRITE seal was discussed [1] last week
where we don't need to modify core VFS structures to get the same
behavior of the seal.  This solves several side-effects pointed by Andy.
self-tests are provided in later patch to verify the expected semantics.

[1] https://lore.kernel.org/lkml/20181111173650.GA256781@google.com/

Thanks a lot to Andy for suggestions to improve code.

Link: http://lkml.kernel.org/r/20190112203816.85534-2-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Marc-Andr Lureau <marcandre.lureau@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:19 -08:00
Aneesh Kumar K.V
04a8645304 mm: update ptep_modify_prot_commit to take old pte value as arg
Architectures like ppc64 require to do a conditional tlb flush based on
the old and new value of pte.  Enable that by passing old pte value as
the arg.

Link: http://lkml.kernel.org/r/20190116085035.29729-3-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:18 -08:00
Aneesh Kumar K.V
0cbe3e26ab mm: update ptep_modify_prot_start/commit to take vm_area_struct as arg
Patch series "NestMMU pte upgrade workaround for mprotect", v5.

We can upgrade pte access (R -> RW transition) via mprotect.  We need to
make sure we follow the recommended pte update sequence as outlined in
commit bd5050e38a ("powerpc/mm/radix: Change pte relax sequence to
handle nest MMU hang") for such updates.  This patch series does that.

This patch (of 5):

Some architectures may want to call flush_tlb_range from these helpers.

Link: http://lkml.kernel.org/r/20190116085035.29729-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:18 -08:00
Johannes Weiner
147e1a97c4 fs: kernfs: add poll file operation
Patch series "psi: pressure stall monitors", v3.

Android is adopting psi to detect and remedy memory pressure that
results in stuttering and decreased responsiveness on mobile devices.

Psi gives us the stall information, but because we're dealing with
latencies in the millisecond range, periodically reading the pressure
files to detect stalls in a timely fashion is not feasible.  Psi also
doesn't aggregate its averages at a high enough frequency right now.

This patch series extends the psi interface such that users can
configure sensitive latency thresholds and use poll() and friends to be
notified when these are breached.

As high-frequency aggregation is costly, it implements an aggregation
method that is optimized for fast, short-interval averaging, and makes
the aggregation frequency adaptive, such that high-frequency updates
only happen while monitored stall events are actively occurring.

With these patches applied, Android can monitor for, and ward off,
mounting memory shortages before they cause problems for the user.  For
example, using memory stall monitors in userspace low memory killer
daemon (lmkd) we can detect mounting pressure and kill less important
processes before device becomes visibly sluggish.

In our memory stress testing psi memory monitors produce roughly 10x
less false positives compared to vmpressure signals.  Having ability to
specify multiple triggers for the same psi metric allows other parts of
Android framework to monitor memory state of the device and act
accordingly.

The new interface is straightforward.  The user opens one of the
pressure files for writing and writes a trigger description into the
file descriptor that defines the stall state - some or full, and the
maximum stall time over a given window of time.  E.g.:

        /* Signal when stall time exceeds 100ms of a 1s window */
        char trigger[] = "full 100000 1000000";
        fd = open("/proc/pressure/memory");
        write(fd, trigger, sizeof(trigger));
        while (poll() >= 0) {
                ...
        }
        close(fd);

When the monitored stall state is entered, psi adapts its aggregation
frequency according to what the configured time window requires in order
to emit event signals in a timely fashion.  Once the stalling subsides,
aggregation reverts back to normal.

The trigger is associated with the open file descriptor.  To stop
monitoring, the user only needs to close the file descriptor and the
trigger is discarded.

Patches 1-4 prepare the psi code for polling support.  Patch 5
implements the adaptive polling logic, the pressure growth detection
optimized for short intervals, and hooks up write() and poll() on the
pressure files.

The patches were developed in collaboration with Johannes Weiner.

This patch (of 5):

Kernfs has a standardized poll/notification mechanism for waking all
pollers on all fds when a filesystem node changes.  To allow polling for
custom events, add a .poll callback that can override the default.

This is in preparation for pollable cgroup pressure files which have
per-fd trigger configurations.

Link: http://lkml.kernel.org/r/20190124211518.244221-2-surenb@google.com
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:17 -08:00
Shakeel Butt
60cd4bcd62 memcg: localize memcg_kmem_enabled() check
Move the memcg_kmem_enabled() checks into memcg kmem charge/uncharge
functions, so, the users don't have to explicitly check that condition.

This is purely code cleanup patch without any functional change.  Only
the order of checks in memcg_charge_slab() can potentially be changed
but the functionally it will be same.  This should not matter as
memcg_charge_slab() is not in the hot path.

Link: http://lkml.kernel.org/r/20190103161203.162375-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:15 -08:00
David Hildenbrand
ca215086b1 mm: convert PG_balloon to PG_offline
PG_balloon was introduced to implement page migration/compaction for
pages inflated in virtio-balloon.  Nowadays, it is only a marker that a
page is part of virtio-balloon and therefore logically offline.

We also want to make use of this flag in other balloon drivers - for
inflated pages or when onlining a section but keeping some pages offline
(e.g.  used right now by XEN and Hyper-V via set_online_page_callback()).

We are going to expose this flag to dump tools like makedumpfile.  But
instead of exposing PG_balloon, let's generalize the concept of marking
pages as logically offline, so it can be reused for other purposes later
on.

Rename PG_balloon to PG_offline.  This is an indicator that the page is
logically offline, the content stale and that it should not be touched
(e.g.  a hypervisor would have to allocate backing storage in order for
the guest to dump an unused page).  We can then e.g.  exclude such pages
from dumps.

We replace and reuse KPF_BALLOON (23), as this shouldn't really harm
(and for now the semantics stay the same).  In following patches, we
will make use of this bit also in other balloon drivers.  While at it,
document PGTABLE.

[akpm@linux-foundation.org: fix comment text, per David]
Link: http://lkml.kernel.org/r/20181119101616.8901-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Pankaj gupta <pagupta@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Christian Hansen <chansen3@cisco.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Miles Chen <miles.chen@mediatek.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Julien Freche <jfreche@vmware.com>
Cc: Kairui Song <kasong@redhat.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Lianbo Jiang <lijiang@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:14 -08:00
Shuriyc Chu
5704a06810 fs/file.c: initialize init_files.resize_wait
(Taken from https://bugzilla.kernel.org/show_bug.cgi?id=200647)

'get_unused_fd_flags' in kthread cause kernel crash.  It works fine on
4.1, but causes crash after get 64 fds.  It also cause crash on
ubuntu1404/1604/1804, centos7.5, and the crash messages are almost the
same.

The crash message on centos7.5 shows below:

  start fd 61
  start fd 62
  start fd 63
  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: __wake_up_common+0x2e/0x90
  PGD 0
  Oops: 0000 [#1] SMP
  Modules linked in: test(OE) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter devlink sunrpc kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd sg ppdev pcspkr virtio_balloon parport_pc parport i2c_piix4 joydev ip_tables xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_generic ata_generic pata_acpi virtio_scsi virtio_console virtio_net cirrus drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm crct10dif_pclmul crct10dif_common crc32c_intel drm ata_piix serio_raw libata virtio_pci virtio_ring i2c_core
   virtio floppy dm_mirror dm_region_hash dm_log dm_mod
  CPU: 2 PID: 1820 Comm: test_fd Kdump: loaded Tainted: G           OE  ------------   3.10.0-862.3.3.el7.x86_64 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
  task: ffff8e92b9431fa0 ti: ffff8e94247a0000 task.ti: ffff8e94247a0000
  RIP: 0010:__wake_up_common+0x2e/0x90
  RSP: 0018:ffff8e94247a2d18  EFLAGS: 00010086
  RAX: 0000000000000000 RBX: ffffffff9d09daa0 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffffff9d09daa0
  RBP: ffff8e94247a2d50 R08: 0000000000000000 R09: ffff8e92b95dfda8
  R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9d09daa8
  R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000003
  FS:  0000000000000000(0000) GS:ffff8e9434e80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 000000017c686000 CR4: 00000000000207e0
  Call Trace:
    __wake_up+0x39/0x50
    expand_files+0x131/0x250
    __alloc_fd+0x47/0x170
    get_unused_fd_flags+0x30/0x40
    test_fd+0x12a/0x1c0 [test]
    kthread+0xd1/0xe0
    ret_from_fork_nospec_begin+0x21/0x21
  Code: 66 90 55 48 89 e5 41 57 41 89 f7 41 56 41 89 ce 41 55 41 54 49 89 fc 49 83 c4 08 53 48 83 ec 10 48 8b 47 08 89 55 cc 4c 89 45 d0 <48> 8b 08 49 39 c4 48 8d 78 e8 4c 8d 69 e8 75 08 eb 3b 4c 89 ef
  RIP   __wake_up_common+0x2e/0x90
   RSP <ffff8e94247a2d18>
  CR2: 0000000000000000

This issue exists since CentOS 7.5 3.10.0-862 and CentOS 7.4
(3.10.0-693.21.1 ) is ok.  Root cause: the item 'resize_wait' is not
initialized before being used.

Reported-by: Richard Zhang <zhang.zijian@h3c.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:14 -08:00
Vineet Gupta
a905737fdd fs/inode.c: inode_set_flags(): replace opencoded set_mask_bits()
It seems that commits 5f16f3225b and 00a1a053eb, both with same
commitlog ("ext4: atomically set inode->i_flags in ext4_set_inode_flags()")
introduced the set_mask_bits API, but somehow missed not using it in ext4
in the end.

Also, set_mask_bits() is used in fs quite a bit and we can possibly come
up with a generic llsc based implementation (w/o the cmpxchg loop)

Link: http://lkml.kernel.org/r/1548275584-18096-3-git-send-email-vgupta@synopsys.com
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:13 -08:00
Gustavo A. R. Silva
f402cf03fc ocfs2: Use zero-sized array and struct_size() in kzalloc()
Update the code to use a zero-sized array instead of a pointer in
structure ocfs2_slot_info and use struct_size() in kzalloc().

Notice that one of the more common cases of allocation size calculations
is finding the size of a structure that has a zero-sized array at the
end, along with memory for some number of elements for that array.  For
example:

  struct foo {
      int stuff;
      void *entry[];
  };

  instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

  instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.

Link: http://lkml.kernel.org/r/20190108191903.GA22056@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:13 -08:00
Gang He
5500ab4ed3 ocfs2: fix the application IO timeout when fstrim is running
The user reported this problem, the upper application IO was timeout
when fstrim was running on this ocfs2 partition.  the application
monitoring resource agent considered that this application did not work,
then this node was fenced by the cluster brain (e.g.  pacemaker).

The root cause is that fstrim thread always holds main_bm meta-file
related locks until all the cluster groups are trimmed.  This patch will
make fstrim thread release main_bm meta-file related locks when each
cluster group is trimmed, this will let the current application IO has a
chance to claim the clusters from main_bm meta-file.

Link: http://lkml.kernel.org/r/20190111090014.31645-1-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:13 -08:00
Jia Guo
cc725ef3cb ocfs2: fix a panic problem caused by o2cb_ctl
In the process of creating a node, it will cause NULL pointer
dereference in kernel if o2cb_ctl failed in the interval (mkdir,
o2cb_set_node_attribute(node_num)] in function o2cb_add_node.

The node num is initialized to 0 in function o2nm_node_group_make_item,
o2nm_node_group_drop_item will mistake the node number 0 for a valid
node number when we delete the node before the node number is set
correctly.  If the local node number of the current host happens to be
0, cluster->cl_local_node will be set to O2NM_INVALID_NODE_NUM while
o2hb_thread still running.  The panic stack is generated as follows:

  o2hb_thread
      \-o2hb_do_disk_heartbeat
          \-o2hb_check_own_slot
              |-slot = &reg->hr_slots[o2nm_this_node()];
              //o2nm_this_node() return O2NM_INVALID_NODE_NUM

We need to check whether the node number is set when we delete the node.

Link: http://lkml.kernel.org/r/133d8045-72cc-863e-8eae-5013f9f6bc51@huawei.com
Signed-off-by: Jia Guo <guojia12@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Acked-by: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:13 -08:00
Jaegeuk Kim
fb40d618b0 f2fs: don't clear CP_QUOTA_NEED_FSCK_FLAG
If we met this once, let fsck.f2fs clear this only.
Note that, this addresses all the subtle fault injection test.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-05 19:58:06 -08:00
Chao Yu
6d52e135c8 f2fs: don't allow negative ->write_io_size_bits
As Dan reported:

"We put an upper bound on ->write_io_size_bits but we don't have a lower
bound."

So let's add lower bound check for ->write_io_size_bits in parse_options().

[We don't allow configuring ->write_io_size_bits to zero, since at least
we need to fill one dummy page for aligned IO.]

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-05 19:58:06 -08:00
Chao Yu
500e0b28ec f2fs: fix to check inline_xattr_size boundary correctly
We use below condition to check inline_xattr_size boundary:

	if (!F2FS_OPTION(sbi).inline_xattr_size ||
		F2FS_OPTION(sbi).inline_xattr_size >=
				DEF_ADDRS_PER_INODE -
				F2FS_TOTAL_EXTRA_ATTR_SIZE -
				DEF_INLINE_RESERVED_SIZE -
				DEF_MIN_INLINE_SIZE)

There is there problems in that check:
- we should allow inline_xattr_size equaling to min size of inline
{data,dentry} area.
- F2FS_TOTAL_EXTRA_ATTR_SIZE and inline_xattr_size are based on
different size unit, previous one is 4 bytes, latter one is 1 bytes.
- DEF_MIN_INLINE_SIZE only indicate min size of inline data area,
however, we need to consider min size of inline dentry area as well,
minimal inline dentry should at least contain two entries: '.' and
'..', so that min inline_dentry size is 40 bytes.

.bitmap		1 * 1 = 1
.reserved	1 * 1 = 1
.dentry		11 * 2 = 22
.filename	8 * 2 = 16
total		40

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-05 19:58:06 -08:00
Sahitya Tummala
9083977dab f2fs: do not use mutex lock in atomic context
Fix below warning coming because of using mutex lock in atomic context.

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:98
in_atomic(): 1, irqs_disabled(): 0, pid: 585, name: sh
Preemption disabled at: __radix_tree_preload+0x28/0x130
Call trace:
 dump_backtrace+0x0/0x2b4
 show_stack+0x20/0x28
 dump_stack+0xa8/0xe0
 ___might_sleep+0x144/0x194
 __might_sleep+0x58/0x8c
 mutex_lock+0x2c/0x48
 f2fs_trace_pid+0x88/0x14c
 f2fs_set_node_page_dirty+0xd0/0x184

Do not use f2fs_radix_tree_insert() to avoid doing cond_resched() with
spin_lock() acquired.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-05 19:58:06 -08:00
Chao Yu
c42d28ce3e f2fs: fix potential data inconsistence of checkpoint
Previously, we changed lock from cp_rwsem to node_change, it solved
the deadlock issue which was caused by below race condition:

Thread A			Thread B
- f2fs_setattr
 - f2fs_lock_op  -- read_lock
 - dquot_transfer
  - __dquot_transfer
   - dquot_acquire
    - commit_dqblk
     - f2fs_quota_write
      - f2fs_write_begin
       - f2fs_write_failed
				- write_checkpoint
				 - block_operations
				  - f2fs_lock_all  -- write_lock
        - f2fs_truncate_blocks
         - f2fs_lock_op  -- read_lock

But it breaks the sematics of cp_rwsem, in other callers like:
- f2fs_file_write_iter -> f2fs_write_begin -> f2fs_write_failed
- f2fs_direct_IO -> f2fs_write_failed

We allow to truncate dnode w/o cp_rwsem held, result in incorrect sit
bitmap update, which can cause further data corruption.

So this patch reverts previous fix implementation, and try to fix
deadlock by skipping calling f2fs_truncate_blocks() in f2fs_write_failed()
only for quota file, and keep the preallocated data/node in the tail of
quota file, we can expecte that the preallocated space can be used to
store quota info latter soon.

Fixes: af033b2aa8 ("f2fs: guarantee journalled quota data by checkpoint")
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-05 19:58:06 -08:00
Chengguang Xu
025cdb166c f2fs: jump to label 'free_node_inode' when failing from d_make_root()
When sb->s_root is NULL dput() will do nothing,
so jump to label 'free_node_inode' instead of lable
'free_root_inode' when failing from d_make_root().

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-05 19:58:06 -08:00
zhengliang
a0770e13c8 f2fs: fix to data block override node segment by mistake
v4: Rearrange the previous three versions.

The following scenario could lead to data block override by mistake.

TASK A            |  TASK kworker                                            |     TASK B                                            |       TASK C
                  |                                                          |                                                       |
open              |                                                          |                                                       |
write             |                                                          |                                                       |
close             |                                                          |                                                       |
                  |  f2fs_write_data_pages                                   |                                                       |
                  |    f2fs_write_cache_pages                                |                                                       |
                  |      f2fs_outplace_write_data                            |                                                       |
                  |        f2fs_allocate_data_block (get block in seg S,     |                                                       |
                  |                                  S is full, and only     |                                                       |
                  |                                  have this valid data    |                                                       |
                  |                                  block)                  |                                                       |
                  |          allocate_segment                                |                                                       |
                  |          locate_dirty_segment (mark S as PRE)            |                                                       |
                  |        f2fs_submit_page_write (submit but is not         |                                                       |
                  |                                written on dev)           |                                                       |
unlink            |                                                          |                                                       |
 iput_final       |                                                          |                                                       |
  f2fs_drop_inode |                                                          |                                                       |
    f2fs_truncate |                                                          |                                                       |
 (not evict)      |                                                          |                                                       |
                  |                                                          | write_checkpoint                                      |
                  |                                                          |  flush merged bio but not wait file data writeback    |
                  |                                                          |  set_prefree_as_free (mark S as FREE)                 |
                  |                                                          |                                                       | update NODE/DATA
                  |                                                          |                                                       | allocate_segment (select S)
                  |     writeback done                                       |                                                       |

So we need to guarantee io complete before truncate inode in f2fs_drop_inode.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Zheng Liang <zhengliang6@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-03-05 19:57:56 -08:00
Steve French
69dc4b1817 smb3: request more credits on normal (non-large read/write) ops
We can end up building up credits too slowly to do large operations
(reads and writes for example) that require many credits. By
comparison most other SMB3 clients request many more (sometimes
thousands) of credits on all operations.  Increase
the number of credits we request on typical (non-large e.g
read/write) operations to 10 from 2 so we can build a pool of credits
faster.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-03-05 21:11:54 -06:00
Pavel Shilovsky
b30c74c73c CIFS: Mask off signals when sending SMB packets
We don't want to break SMB sessions if we receive signals when
sending packets through the network. Fix it by masking off signals
inside __smb_send_rqst() to avoid partial packet sends due to
interrupts.

Return -EINTR if a signal is pending and only a part of the packet
was sent. Return a success status code if the whole packet was sent
regardless of signal being pending or not. This keeps a mid entry
for the request in the pending queue and allows the demultiplex
thread to handle a response from the server properly.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:15:05 -06:00
Pavel Shilovsky
afc18a6f7b CIFS: Return -EAGAIN instead of -ENOTSOCK
When we attempt to send a packet while the demultiplex thread
is in the middle of cifs_reconnect() we may end up returning
-ENOTSOCK to upper layers. The intent here is to retry the request
once the TCP connection is up, so change it to return -EAGAIN
instead. The latter error code is retryable and the upper layers
will retry the request if needed.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:14:39 -06:00
Pavel Shilovsky
2084ed5716 CIFS: Only send SMB2_NEGOTIATE command on new TCP connections
Do not allow commands other than SMB2_NEGOTIATE to be sent over
recently established TCP connections. Return -EAGAIN to let upper
layers handle it properly.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:14:27 -06:00
Pavel Shilovsky
6dfbd84684 CIFS: Fix read after write for files with read caching
When we have a READ lease for a file and have just issued a write
operation to the server we need to purge the cache and set oplock/lease
level to NONE to avoid reading stale data. Currently we do that
only if a write operation succedeed thus not covering cases when
a request was sent to the server but a negative error code was
returned later for some other reasons (e.g. -EIOCBQUEUED or -EINTR).
Fix this by turning off caching regardless of the error code being
returned.

The patches fixes generic tests 075 and 112 from the xfs-tests.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-03-05 18:10:51 -06:00
Steve French
96281b9e46 smb3: for kerberos mounts display the credential uid used
For kerberos mounts, the cruid is helpful to display in
/proc/mounts in order to tell which uid's krb5 cache we
got the ticket for and to tell in the multiuser krb5 case
which local users (uids) we have Kerberos authentic sessions
for.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-03-05 18:10:48 -06:00
Louis Taylor
259594bea5 cifs: use correct format characters
When compiling with -Wformat, clang emits the following warnings:

fs/cifs/smb1ops.c:312:20: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
                         tgt_total_cnt, total_in_tgt);
                                        ^~~~~~~~~~~~

fs/cifs/cifs_dfs_ref.c:289:4: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
                 ref->flags, ref->server_type);
                 ^~~~~~~~~~

fs/cifs/cifs_dfs_ref.c:289:16: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
                 ref->flags, ref->server_type);
                             ^~~~~~~~~~~~~~~~

fs/cifs/cifs_dfs_ref.c:291:4: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
                 ref->ref_flag, ref->path_consumed);
                 ^~~~~~~~~~~~~

fs/cifs/cifs_dfs_ref.c:291:19: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
                 ref->ref_flag, ref->path_consumed);
                                ^~~~~~~~~~~~~~~~~~
The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct ones for ints and unsigned
ints.

Link: https://github.com/ClangBuiltLinux/linux/issues/378

Signed-off-by: Louis Taylor <louis@kragniz.eu>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2019-03-05 18:10:28 -06:00
Steve French
d42043a600 smb3: add dynamic trace point for query_info_enter/done
Adds dynamic trace points for the query_info_enter
and query_info_done (no error) case.  We only had one
existing trace point related to this which was on query_info
errors.  Note that these two new tracepoints are for the
non-compounded query_info paths.

Sample output (from: trace-cmd record -e smb3_query_info*)

          ls-24140 [001] .... 27811.866068: smb3_query_info_enter: xid=7 sid=0xd2d00587 tid=0xb5441939 fid=0xcf082bac class=18 type=0x1
          ls-24140 [001] .... 27811.867656: smb3_query_info_done: xid=7 sid=0xd2d00587 tid=0xb5441939 fid=0xcf082bac class=18 type=0x1
  getcifsacl-24149 [005] .... 27854.759873: smb3_query_info_enter: xid=15 sid=0xd2d00587 tid=0xb5441939 fid=0x99896e72 class=0 type=0x3
  getcifsacl-24149 [005] .... 27854.761730: smb3_query_info_done: xid=15 sid=0xd2d00587 tid=0xb5441939 fid=0x99896e72 class=0 type=0x3

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-05 18:10:20 -06:00
Steve French
53a3e0d96c smb3: add dynamic trace point for smb3_cmd_enter
Add tracepoint before sending an SMB3 command on the wire (ie add
an smb3_cmd_enter tracepoint). This allows us to look in much
more detail at response times (between request and response).

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-05 18:10:13 -06:00
Steve French
efe2e9f369 smb3: improve dynamic tracing of open and posix mkdir
Add dynamic trace point for open_enter (and posix mkdir enter)

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-05 18:10:09 -06:00
Steve French
b0a42f2ac9 smb3: add missing read completion trace point
When ENODATA returned we weren't logging the read completion
(not an error, but can be indicated by logging length 0) which
makes looking at read traces confusing for smb3.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-03-05 18:10:04 -06:00
Steve French
d323c24617 smb3: Add tracepoints for read, write and query_dir enter
Allows tracing begin (not just completion) of read, write
and query_dir which may be helpful in finding slow requests
and other timing information

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-03-05 18:10:04 -06:00
Steve French
adb3b4e90e smb3: add tracepoints for query dir
Adds two tracepoints - one for query_dir done (no err) and one for query_dir_err

Sanple output:

To start the trace in one window:
       trace-cmd record -e smb3_query_dir*

Then in another window after doing an
       ls /mnt

View the trace output by:

        trace-cmd show

Sample output:

           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
              | |       |   ||||       |         |
             ls-24869 [007] .... 90695.452009: smb3_query_dir_done: xid=7 sid=0x5027d24d tid=0xb95cf25a fid=0xc41a8c3e offset=0x0 len=0x16
             ls-24869 [000] .... 90695.452764: smb3_query_dir_done: xid=8 sid=0x5027d24d tid=0xb95cf25a fid=0xc41a8c3e offset=0x0 len=0x0
             ls-24874 [003] .... 90701.506342: smb3_query_dir_done: xid=11 sid=0x5027d24d tid=0xb95cf25a fid=0x33ad3601 offset=0x0 len=0x8
             ls-24874 [003] .... 90701.506917: smb3_query_dir_done: xid=12 sid=0x5027d24d tid=0xb95cf25a fid=0x33ad3601 offset=0x0 len=0x0

Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:10:04 -06:00
Steve French
0d481325a9 smb3: Update POSIX negotiate context with POSIX ctxt GUID
POSIX negotiate context now includes the GUID specifying
which POSIX open context we support.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
2019-03-05 18:10:04 -06:00
Steve French
cfe7e41f79 cifs: update internal module version number
To 2.18

Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:10:04 -06:00
Pavel Shilovsky
7091bcaba9 CIFS: Try to acquire credits at once for compound requests
Currently we get one credit per compound part of the request
individually. This may lead to being stuck on waiting for credits
if multiple compounded operations happen in parallel. Try acquire
credits for all compound parts at once. Return immediately if not
enough credits and too few requests are in flight currently thus
narrowing the possibility of infinite waiting for credits.

The more advance fix is to return right away if not enough credits
for the compound request and do not look at the number of requests
in flight. The caller should handle such situations by falling back
to sequential execution of SMB commands instead of compounding.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:10:04 -06:00
Pavel Shilovsky
fe768d51c8 CIFS: Return error code when getting file handle for writeback
Now we just return NULL cifsFileInfo pointer in cases we didn't find
or couldn't reopen a file. This hides errors from cifs_reopen_file()
especially retryable errors which should be handled appropriately.
Create new cifs_get_writable_file() routine that returns error codes
from cifs_reopen_file() and use it in the writeback codepath.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:10:04 -06:00
Pavel Shilovsky
c4b8f657d5 CIFS: Move open file handling to writepages
Currently we check for an open file existence in wdata_send_pages()
which doesn't provide an easy way to handle error codes that will
be returned from find_writable_filehandle() once it is changed.
Move the check to writepages.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:10:04 -06:00
Pavel Shilovsky
258f0603be CIFS: Move unlocking pages from wdata_send_pages()
Currently wdata_send_pages() unlocks pages after sending.
This complicates further refactoring and doesn't align
with the function name. Move unlocking to writepages.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:10:04 -06:00
Pavel Shilovsky
c7d38dbe7d CIFS: Find and reopen a file before get MTU credits in writepages
Reorder finding and reopening a writable handle file and getting
MTU credits in writepages because we may be stuck on low credits
otherwise.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:10:04 -06:00
Pavel Shilovsky
3e9529944d CIFS: Reopen file before get SMB2 MTU credits for async IO
Currently we get MTU credits before we check an open file if
it needs to be reopened. Reopening the file in such conditions
leads to a possibility of being stuck waiting indefinitely
for credits in the transport layer. Fix this by reopening the
file first if needed and then getting MTU credits for async IO.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:10:01 -06:00
Pavel Shilovsky
f0b93cb9d1 CIFS: Remove custom credit adjustments for SMB2 async IO
Currently we do proper accounting for credits in regards to
reconnects and error handling, thus we do not need custom
credit adjustments when reconnect is detected developed
previously.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:10:01 -06:00
Pavel Shilovsky
9a1c67e8d5 CIFS: Adjust MTU credits before reopening a file
Currently we adjust MTU credits before sending an IO request
and after reopening a file. This approach doesn't allow the
reopen routine to use existing credits that are not needed
for IO. Reorder credit adjustment and reopening a file to
use credits available to the client more efficiently. Also
unwrap complex if statement into few pieces to improve
readability.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:10:01 -06:00
Pavel Shilovsky
97ea499883 CIFS: Check for reconnects before sending compound requests
The reconnect might have happended after we obtained credits
and before we acquired srv_mutex. Check for that under the mutex
and retry a sync operation if the reconnect is detected.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:10:01 -06:00
Pavel Shilovsky
3349c3a79f CIFS: Check for reconnects before sending async requests
The reconnect might have happended after we obtained credits
and before we acquired srv_mutex. Check for that under the mutex
and retry an async operation if the reconnect is detected.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:10:01 -06:00
Pavel Shilovsky
34f4deb7c5 CIFS: Respect reconnect in non-MTU credits calculations
Every time after a session reconnect we don't need to account for
credits obtained in previous sessions. Make use of the recently
added cifs_credits structure to properly calculate credits for
non-MTU requests the same way we did for MTU ones.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:10:01 -06:00
Pavel Shilovsky
335b7b62ff CIFS: Respect reconnect in MTU credits calculations
Every time after a session reconnect we don't need to account for
credits obtained in previous sessions. Introduce new struct cifs_credits
which contains both credits value and reconnect instance of the
time those credits were taken. Modify a routine that add credits
back to handle the reconnect instance by assuming zero credits
if the reconnect happened after the credits were obtained and
before we decided to add them back due to some errors during sending.

This patch fixes the MTU credits cases. The subsequent patch
will handle non-MTU ones.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:10:01 -06:00
Pavel Shilovsky
5b96485260 CIFS: Set reconnect instance to one initially
Currently we set reconnect instance to zero on the first
connection but this is not convenient because we need to
reserve some special value for credit handling on reconnects
which is coming in subsequent patches. Fix this by starting
with one when initiating a new TCP connection.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-05 18:10:01 -06:00
Linus Torvalds
b1b988a6a0 Merge branch 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull year 2038 updates from Thomas Gleixner:
 "Another round of changes to make the kernel ready for 2038. After lots
  of preparatory work this is the first set of syscalls which are 2038
  safe:

    403 clock_gettime64
    404 clock_settime64
    405 clock_adjtime64
    406 clock_getres_time64
    407 clock_nanosleep_time64
    408 timer_gettime64
    409 timer_settime64
    410 timerfd_gettime64
    411 timerfd_settime64
    412 utimensat_time64
    413 pselect6_time64
    414 ppoll_time64
    416 io_pgetevents_time64
    417 recvmmsg_time64
    418 mq_timedsend_time64
    419 mq_timedreceiv_time64
    420 semtimedop_time64
    421 rt_sigtimedwait_time64
    422 futex_time64
    423 sched_rr_get_interval_time64

  The syscall numbers are identical all over the architectures"

* 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  riscv: Use latest system call ABI
  checksyscalls: fix up mq_timedreceive and stat exceptions
  unicore32: Fix __ARCH_WANT_STAT64 definition
  asm-generic: Make time32 syscall numbers optional
  asm-generic: Drop getrlimit and setrlimit syscalls from default list
  32-bit userspace ABI: introduce ARCH_32BIT_OFF_T config option
  compat ABI: use non-compat openat and open_by_handle_at variants
  y2038: add 64-bit time_t syscalls to all 32-bit architectures
  y2038: rename old time and utime syscalls
  y2038: remove struct definition redirects
  y2038: use time32 syscall names on 32-bit
  syscalls: remove obsolete __IGNORE_ macros
  y2038: syscalls: rename y2038 compat syscalls
  x86/x32: use time64 versions of sigtimedwait and recvmmsg
  timex: change syscalls to use struct __kernel_timex
  timex: use __kernel_timex internally
  sparc64: add custom adjtimex/clock_adjtime functions
  time: fix sys_timer_settime prototype
  time: Add struct __kernel_timex
  time: make adjtime compat handling available for 32 bit
  ...
2019-03-05 14:08:26 -08:00
NeilBrown
b602345da6 nfsd: fix memory corruption caused by readdir
If the result of an NFSv3 readdir{,plus} request results in the
"offset" on one entry having to be split across 2 pages, and is sized
so that the next directory entry doesn't fit in the requested size,
then memory corruption can happen.

When encode_entry() is called after encoding the last entry that fits,
it notices that ->offset and ->offset1 are set, and so stores the
offset value in the two pages as required.  It clears ->offset1 but
*does not* clear ->offset.

Normally this omission doesn't matter as encode_entry_baggage() will
be called, and will set ->offset to a suitable value (not on a page
boundary).
But in the case where cd->buflen < elen and nfserr_toosmall is
returned, ->offset is not reset.

This means that nfsd3proc_readdirplus will see ->offset with a value 4
bytes before the end of a page, and ->offset1 set to NULL.
It will try to write 8bytes to ->offset.
If we are lucky, the next page will be read-only, and the system will
  BUG: unable to handle kernel paging request at...

If we are unlucky, some innocent page will have the first 4 bytes
corrupted.

nfsd3proc_readdir() doesn't even check for ->offset1, it just blindly
writes 8 bytes to the offset wherever it is.

Fix this by clearing ->offset after it is used, and copying the
->offset handling code from nfsd3_proc_readdirplus into
nfsd3_proc_readdir.

(Note that the commit hash in the Fixes tag is from the 'history'
 tree - this bug predates git).

Fixes: 0b1d57cf7654 ("[PATCH] kNFSd: Fix nfs3 dentry encoding")
Fixes-URL: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=0b1d57cf7654
Cc: stable@vger.kernel.org (v2.6.12+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-03-05 16:41:33 -05:00
Linus Torvalds
78f8601354 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The interrupt departement delivers this time:

   - New infrastructure to manage NMIs on platforms which have a sane
     NMI delivery, i.e. identifiable NMI vectors instead of a single
     lump.

   - Simplification of the interrupt affinity management so drivers
     don't have to implement ugly loops around the PCI/MSI enablement.

   - Speedup for interrupt statistics in /proc/stat

   - Provide a function to retrieve the default irq domain

   - A new interrupt controller for the Loongson LS1X platform

   - Affinity support for the SiFive PLIC

   - Better support for the iMX irqsteer driver

   - NUMA aware memory allocations for GICv3

   - The usual small fixes, improvements and cleanups all over the
     place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  irqchip/imx-irqsteer: Add multi output interrupts support
  irqchip/imx-irqsteer: Change to use reg_num instead of irq_group
  dt-bindings: irq: imx-irqsteer: Add multi output interrupts support
  dt-binding: irq: imx-irqsteer: Use irq number instead of group number
  irqchip/brcmstb-l2: Use _irqsave locking variants in non-interrupt code
  irqchip/gicv3-its: Use NUMA aware memory allocation for ITS tables
  irqdomain: Allow the default irq domain to be retrieved
  irqchip/sifive-plic: Implement irq_set_affinity() for SMP host
  irqchip/sifive-plic: Differentiate between PLIC handler and context
  irqchip/sifive-plic: Add warning in plic_init() if handler already present
  irqchip/sifive-plic: Pre-compute context hart base and enable base
  PCI/MSI: Remove obsolete sanity checks for multiple interrupt sets
  genirq/affinity: Remove the leftovers of the original set support
  nvme-pci: Simplify interrupt allocation
  genirq/affinity: Add new callback for (re)calculating interrupt sets
  genirq/affinity: Store interrupt sets size in struct irq_affinity
  genirq/affinity: Code consolidation
  irqchip/irq-sifive-plic: Check and continue in case of an invalid cpuid.
  irqchip/i8259: Fix shutdown order by moving syscore_ops registration
  dt-bindings: interrupt-controller: loongson ls1x intc
  ...
2019-03-05 12:21:47 -08:00
Linus Torvalds
08300f4402 a.out: remove core dumping support
We're (finally) phasing out a.out support for good.  As Borislav Petkov
points out, we've supported ELF binaries for about 25 years by now, and
coredumping in particular has bitrotted over the years.

None of the tool chains even support generating a.out binaries any more,
and the plan is to deprecate a.out support entirely for the kernel.  But
I want to start with just removing the core dumping code, because I can
still imagine that somebody actually might want to support a.out as a
simpler biinary format.

Particularly if you generate some random binaries on the fly, ELF is a
much more complicated format (admittedly ELF also does have a lot of
toolchain support, mitigating that complexity a lot and you really
should have moved over in the last 25 years).

So it's at least somewhat possible that somebody out there has some
workflow that still involves generating and running a.out executables.

In contrast, it's very unlikely that anybody depends on debugging any
legacy a.out core files.  But regardless, I want this phase-out to be
done in two steps, so that we can resurrect a.out support (if needed)
without having to resurrect the core file dumping that is almost
certainly not needed.

Jann Horn pointed to the <asm/a.out-core.h> file that my first trivial
cut at this had missed.

And Alan Cox points out that the a.out binary loader _could_ be done in
user space if somebody wants to, but we might keep just the loader in
the kernel if somebody really wants it, since the loader isn't that big
and has no really odd special cases like the core dumping does.

Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Jann Horn <jannh@google.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 10:00:35 -08:00
Yan, Zheng
fe33032daa ceph: add mount option to limit caps count
If number of caps exceed the limit, ceph_trim_dentires() also trim
dentries with valid leases. Trimming dentry releases references to
associated inode, which may evict inode and release caps.

By default, there is no limit for caps count.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05 18:55:17 +01:00
Yan, Zheng
37c4efc1dd ceph: periodically trim stale dentries
Previous commit make VFS delete stale dentry when last reference is
dropped. Lease also can become invalid when corresponding dentry has
no reference. This patch make cephfs periodically scan lease list,
delete corresponding dentry if lease is invalid.

There are two types of lease, dentry lease and dir lease. dentry lease
has life time and applies to singe dentry. Dentry lease is added to tail
of a list when it's updated, leases at front of the list will expire
first. Dir lease is CEPH_CAP_FILE_SHARED on directory inode, it applies
to all dentries in the directory. Dentries have dir leases are added to
another list. Dentries in the list are periodically checked in a round
robin manner.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05 18:55:17 +01:00
Yan, Zheng
1e9c2eb681 ceph: delete stale dentry when last reference is dropped
introduce ceph_d_delete(), which checks if dentry has valid lease.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05 18:55:17 +01:00
Yan, Zheng
8d9c0906ac ceph: remove dentry_lru file from debugfs
The file shows all dentries in cephfs mount. It's not very useful.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05 18:55:17 +01:00
Yan, Zheng
32f6511a69 ceph: touch existing cap when handling reply
Move cap to tail of session->s_caps list. So ceph_trim_caps() will
trim older caps first.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05 18:55:17 +01:00
zhengbin
e450f4d1a5 ceph: pass inclusive lend parameter to filemap_write_and_wait_range()
The 'lend' parameter of filemap_write_and_wait_range is required to be
inclusive, so follow the rule. Same for invalidate_inode_pages2_range.

Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05 18:55:17 +01:00
Yan, Zheng
e3ec8d6898 ceph: send cap releases more aggressively
When pending cap releases fill up one message, start a work to send
cap release message. (old way is sending cap releases every 5 seconds)

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05 18:55:16 +01:00
Yan, Zheng
08796873a5 ceph: support getting ceph.dir.pin vxattr
Link: http://tracker.ceph.com/issues/37576
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05 18:55:16 +01:00
Yan, Zheng
b37fe1f923 ceph: support versioned reply
In versioned reply, inodestat, dirstat and lease are encoded with
version, compat_version and struct_len.

Based on a patch from Jos Collin <jcollin@redhat.com>.

Link: http://tracker.ceph.com/issues/26936
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05 18:55:16 +01:00
Yan, Zheng
75c9627efb ceph: map snapid to anonymous bdev ID
ceph_getattr() return zero dev ID for head inodes and set dev ID to
snapid directly for snaphost inodes. This is not good because userspace
utilities may consider device ID of 0 as invalid, snapid may conflict
with other device's ID.

This patch introduces "snapids to anonymous bdev IDs" map. we create a
new mapping when we see a snapid for the first time. we trim unused
mapping after it is ilde for 5 minutes.

Link: http://tracker.ceph.com/issues/22353
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05 18:55:16 +01:00
Yan, Zheng
81c5a1487e ceph: split large reconnect into multiple messages
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05 18:55:16 +01:00
Yan, Zheng
84bf39509b ceph: decode feature bits in session message
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05 18:55:16 +01:00
Yan, Zheng
5ba72e607c ceph: set special inode's blocksize to page size
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05 18:55:16 +01:00
Linus Torvalds
63bdf4284c Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 "API:
   - Add helper for simple skcipher modes.
   - Add helper to register multiple templates.
   - Set CRYPTO_TFM_NEED_KEY when setkey fails.
   - Require neither or both of export/import in shash.
   - AEAD decryption test vectors are now generated from encryption
     ones.
   - New option CONFIG_CRYPTO_MANAGER_EXTRA_TESTS that includes random
     fuzzing.

  Algorithms:
   - Conversions to skcipher and helper for many templates.
   - Add more test vectors for nhpoly1305 and adiantum.

  Drivers:
   - Add crypto4xx prng support.
   - Add xcbc/cmac/ecb support in caam.
   - Add AES support for Exynos5433 in s5p.
   - Remove sha384/sha512 from artpec7 as hardware cannot do partial
     hash"

[ There is a merge of the Freescale SoC tree in order to pull in changes
  required by patches to the caam/qi2 driver. ]

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (174 commits)
  crypto: s5p - add AES support for Exynos5433
  dt-bindings: crypto: document Exynos5433 SlimSSS
  crypto: crypto4xx - add missing of_node_put after of_device_is_available
  crypto: cavium/zip - fix collision with generic cra_driver_name
  crypto: af_alg - use struct_size() in sock_kfree_s()
  crypto: caam - remove redundant likely/unlikely annotation
  crypto: s5p - update iv after AES-CBC op end
  crypto: x86/poly1305 - Clear key material from stack in SSE2 variant
  crypto: caam - generate hash keys in-place
  crypto: caam - fix DMA mapping xcbc key twice
  crypto: caam - fix hash context DMA unmap size
  hwrng: bcm2835 - fix probe as platform device
  crypto: s5p-sss - Use AES_BLOCK_SIZE define instead of number
  crypto: stm32 - drop pointless static qualifier in stm32_hash_remove()
  crypto: chelsio - Fixed Traffic Stall
  crypto: marvell - Remove set but not used variable 'ivsize'
  crypto: ccp - Update driver messages to remove some confusion
  crypto: adiantum - add 1536 and 4096-byte test vectors
  crypto: nhpoly1305 - add a test vector with len % 16 != 0
  crypto: arm/aes-ce - update IV after partial final CTR block
  ...
2019-03-05 09:09:55 -08:00
Linus Torvalds
6456300356 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Here we go, another merge window full of networking and #ebpf changes:

   1) Snoop DHCPACKS in batman-adv to learn MAC/IP pairs in the DHCP
      range without dealing with floods of ARP traffic, from Linus
      Lüssing.

   2) Throttle buffered multicast packet transmission in mt76, from
      Felix Fietkau.

   3) Support adaptive interrupt moderation in ice, from Brett Creeley.

   4) A lot of struct_size conversions, from Gustavo A. R. Silva.

   5) Add peek/push/pop commands to bpftool, as well as bash completion,
      from Stanislav Fomichev.

   6) Optimize sk_msg_clone(), from Vakul Garg.

   7) Add SO_BINDTOIFINDEX, from David Herrmann.

   8) Be more conservative with local resends due to local congestion,
      from Yuchung Cheng.

   9) Allow vetoing of unsupported VXLAN FDBs, from Petr Machata.

  10) Add health buffer support to devlink, from Eran Ben Elisha.

  11) Add TXQ scheduling API to mac80211, from Toke Høiland-Jørgensen.

  12) Add statistics to basic packet scheduler filter, from Cong Wang.

  13) Add GRE tunnel support for mlxsw Spectrum-2, from Nir Dotan.

  14) Lots of new IP tunneling forwarding tests, also from Nir Dotan.

  15) Add 3ad stats to bonding, from Nikolay Aleksandrov.

  16) Lots of probing improvements for bpftool, from Quentin Monnet.

  17) Various nfp drive #ebpf JIT improvements from Jakub Kicinski.

  18) Allow #ebpf programs to access gso_segs from skb shared info, from
      Eric Dumazet.

  19) Add sock_diag support for AF_XDP sockets, from Björn Töpel.

  20) Support 22260 iwlwifi devices, from Luca Coelho.

  21) Use rbtree for ipv6 defragmentation, from Peter Oskolkov.

  22) Add JMP32 instruction class support to #ebpf, from Jiong Wang.

  23) Add spinlock support to #ebpf, from Alexei Starovoitov.

  24) Support 256-bit keys and TLS 1.3 in ktls, from Dave Watson.

  25) Add device infomation API to devlink, from Jakub Kicinski.

  26) Add new timestamping socket options which are y2038 safe, from
      Deepa Dinamani.

  27) Add RX checksum offloading for various sh_eth chips, from Sergei
      Shtylyov.

  28) Flow offload infrastructure, from Pablo Neira Ayuso.

  29) Numerous cleanups, improvements, and bug fixes to the PHY layer
      and many drivers from Heiner Kallweit.

  30) Lots of changes to try and make packet scheduler classifiers run
      lockless as much as possible, from Vlad Buslov.

  31) Support BCM957504 chip in bnxt_en driver, from Erik Burrows.

  32) Add concurrency tests to tc-tests infrastructure, from Vlad
      Buslov.

  33) Add hwmon support to aquantia, from Heiner Kallweit.

  34) Allow 64-bit values for SO_MAX_PACING_RATE, from Eric Dumazet.

  And I would be remiss if I didn't thank the various major networking
  subsystem maintainers for integrating much of this work before I even
  saw it. Alexei Starovoitov, Daniel Borkmann, Pablo Neira Ayuso,
  Johannes Berg, Kalle Valo, and many others. Thank you!"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2207 commits)
  net/sched: avoid unused-label warning
  net: ignore sysctl_devconf_inherit_init_net without SYSCTL
  phy: mdio-mux: fix Kconfig dependencies
  net: phy: use phy_modify_mmd_changed in genphy_c45_an_config_aneg
  net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA framework
  selftest/net: Remove duplicate header
  sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79
  net/mlx5e: Update tx reporter status in case channels were successfully opened
  devlink: Add support for direct reporter health state update
  devlink: Update reporter state to error even if recover aborted
  sctp: call iov_iter_revert() after sending ABORT
  team: Free BPF filter when unregistering netdev
  ip6mr: Do not call __IP6_INC_STATS() from preemptible context
  isdn: mISDN: Fix potential NULL pointer dereference of kzalloc
  net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYs
  cxgb4/chtls: Prefix adapter flags with CXGB4
  net-sysfs: Switch to bitmap_zalloc()
  mellanox: Switch to bitmap_zalloc()
  bpf: add test cases for non-pointer sanitiation logic
  mlxsw: i2c: Extend initialization by querying resources data
  ...
2019-03-05 08:26:13 -08:00
Christian Brauner
3eb39f4793
signal: add pidfd_send_signal() syscall
The kill() syscall operates on process identifiers (pid). After a process
has exited its pid can be reused by another process. If a caller sends a
signal to a reused pid it will end up signaling the wrong process. This
issue has often surfaced and there has been a push to address this problem [1].

This patch uses file descriptors (fd) from proc/<pid> as stable handles on
struct pid. Even if a pid is recycled the handle will not change. The fd
can be used to send signals to the process it refers to.
Thus, the new syscall pidfd_send_signal() is introduced to solve this
problem. Instead of pids it operates on process fds (pidfd).

/* prototype and argument /*
long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags);

/* syscall number 424 */
The syscall number was chosen to be 424 to align with Arnd's rework in his
y2038 to minimize merge conflicts (cf. [25]).

In addition to the pidfd and signal argument it takes an additional
siginfo_t and flags argument. If the siginfo_t argument is NULL then
pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it
is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo().
The flags argument is added to allow for future extensions of this syscall.
It currently needs to be passed as 0. Failing to do so will cause EINVAL.

/* pidfd_send_signal() replaces multiple pid-based syscalls */
The pidfd_send_signal() syscall currently takes on the job of
rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a
positive pid is passed to kill(2). It will however be possible to also
replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended.

/* sending signals to threads (tid) and process groups (pgid) */
Specifically, the pidfd_send_signal() syscall does currently not operate on
process groups or threads. This is left for future extensions.
In order to extend the syscall to allow sending signal to threads and
process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and
PIDFD_TYPE_TID) should be added. This implies that the flags argument will
determine what is signaled and not the file descriptor itself. Put in other
words, grouping in this api is a property of the flags argument not a
property of the file descriptor (cf. [13]). Clarification for this has been
requested by Eric (cf. [19]).
When appropriate extensions through the flags argument are added then
pidfd_send_signal() can additionally replace the part of kill(2) which
operates on process groups as well as the tgkill(2) and
rt_tgsigqueueinfo(2) syscalls.
How such an extension could be implemented has been very roughly sketched
in [14], [15], and [16]. However, this should not be taken as a commitment
to a particular implementation. There might be better ways to do it.
Right now this is intentionally left out to keep this patchset as simple as
possible (cf. [4]).

/* naming */
The syscall had various names throughout iterations of this patchset:
- procfd_signal()
- procfd_send_signal()
- taskfd_send_signal()
In the last round of reviews it was pointed out that given that if the
flags argument decides the scope of the signal instead of different types
of fds it might make sense to either settle for "procfd_" or "pidfd_" as
prefix. The community was willing to accept either (cf. [17] and [18]).
Given that one developer expressed strong preference for the "pidfd_"
prefix (cf. [13]) and with other developers less opinionated about the name
we should settle for "pidfd_" to avoid further bikeshedding.

The  "_send_signal" suffix was chosen to reflect the fact that the syscall
takes on the job of multiple syscalls. It is therefore intentional that the
name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the
fomer because it might imply that pidfd_send_signal() is a replacement for
kill(2), and not the latter because it is a hassle to remember the correct
spelling - especially for non-native speakers - and because it is not
descriptive enough of what the syscall actually does. The name
"pidfd_send_signal" makes it very clear that its job is to send signals.

/* zombies */
Zombies can be signaled just as any other process. No special error will be
reported since a zombie state is an unreliable state (cf. [3]). However,
this can be added as an extension through the @flags argument if the need
ever arises.

/* cross-namespace signals */
The patch currently enforces that the signaler and signalee either are in
the same pid namespace or that the signaler's pid namespace is an ancestor
of the signalee's pid namespace. This is done for the sake of simplicity
and because it is unclear to what values certain members of struct
siginfo_t would need to be set to (cf. [5], [6]).

/* compat syscalls */
It became clear that we would like to avoid adding compat syscalls
(cf. [7]).  The compat syscall handling is now done in kernel/signal.c
itself by adding __copy_siginfo_from_user_generic() which lets us avoid
compat syscalls (cf. [8]). It should be noted that the addition of
__copy_siginfo_from_user_any() is caused by a bug in the original
implementation of rt_sigqueueinfo(2) (cf. 12).
With upcoming rework for syscall handling things might improve
significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain
any additional callers.

/* testing */
This patch was tested on x64 and x86.

/* userspace usage */
An asciinema recording for the basic functionality can be found under [9].
With this patch a process can be killed via:

 #define _GNU_SOURCE
 #include <errno.h>
 #include <fcntl.h>
 #include <signal.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <sys/stat.h>
 #include <sys/syscall.h>
 #include <sys/types.h>
 #include <unistd.h>

 static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info,
                                         unsigned int flags)
 {
 #ifdef __NR_pidfd_send_signal
         return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags);
 #else
         return -ENOSYS;
 #endif
 }

 int main(int argc, char *argv[])
 {
         int fd, ret, saved_errno, sig;

         if (argc < 3)
                 exit(EXIT_FAILURE);

         fd = open(argv[1], O_DIRECTORY | O_CLOEXEC);
         if (fd < 0) {
                 printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]);
                 exit(EXIT_FAILURE);
         }

         sig = atoi(argv[2]);

         printf("Sending signal %d to process %s\n", sig, argv[1]);
         ret = do_pidfd_send_signal(fd, sig, NULL, 0);

         saved_errno = errno;
         close(fd);
         errno = saved_errno;

         if (ret < 0) {
                 printf("%s - Failed to send signal %d to process %s\n",
                        strerror(errno), sig, argv[1]);
                 exit(EXIT_FAILURE);
         }

         exit(EXIT_SUCCESS);
 }

/* Q&A
 * Given that it seems the same questions get asked again by people who are
 * late to the party it makes sense to add a Q&A section to the commit
 * message so it's hopefully easier to avoid duplicate threads.
 *
 * For the sake of progress please consider these arguments settled unless
 * there is a new point that desperately needs to be addressed. Please make
 * sure to check the links to the threads in this commit message whether
 * this has not already been covered.
 */
Q-01: (Florian Weimer [20], Andrew Morton [21])
      What happens when the target process has exited?
A-01: Sending the signal will fail with ESRCH (cf. [22]).

Q-02:  (Andrew Morton [21])
       Is the task_struct pinned by the fd?
A-02:  No. A reference to struct pid is kept. struct pid - as far as I
       understand - was created exactly for the reason to not require to
       pin struct task_struct (cf. [22]).

Q-03: (Andrew Morton [21])
      Does the entire procfs directory remain visible? Just one entry
      within it?
A-03: The same thing that happens right now when you hold a file descriptor
      to /proc/<pid> open (cf. [22]).

Q-04: (Andrew Morton [21])
      Does the pid remain reserved?
A-04: No. This patchset guarantees a stable handle not that pids are not
      recycled (cf. [22]).

Q-05: (Andrew Morton [21])
      Do attempts to signal that fd return errors?
A-05: See {Q,A}-01.

Q-06: (Andrew Morton [22])
      Is there a cleaner way of obtaining the fd? Another syscall perhaps.
A-06: Userspace can already trivially retrieve file descriptors from procfs
      so this is something that we will need to support anyway. Hence,
      there's no immediate need to add another syscalls just to make
      pidfd_send_signal() not dependent on the presence of procfs. However,
      adding a syscalls to get such file descriptors is planned for a
      future patchset (cf. [22]).

Q-07: (Andrew Morton [21] and others)
      This fd-for-a-process sounds like a handy thing and people may well
      think up other uses for it in the future, probably unrelated to
      signals. Are the code and the interface designed to permit such
      future applications?
A-07: Yes (cf. [22]).

Q-08: (Andrew Morton [21] and others)
      Now I think about it, why a new syscall? This thing is looking
      rather like an ioctl?
A-08: This has been extensively discussed. It was agreed that a syscall is
      preferred for a variety or reasons. Here are just a few taken from
      prior threads. Syscalls are safer than ioctl()s especially when
      signaling to fds. Processes are a core kernel concept so a syscall
      seems more appropriate. The layout of the syscall with its four
      arguments would require the addition of a custom struct for the
      ioctl() thereby causing at least the same amount or even more
      complexity for userspace than a simple syscall. The new syscall will
      replace multiple other pid-based syscalls (see description above).
      The file-descriptors-for-processes concept introduced with this
      syscall will be extended with other syscalls in the future. See also
      [22], [23] and various other threads already linked in here.

Q-09: (Florian Weimer [24])
      What happens if you use the new interface with an O_PATH descriptor?
A-09:
      pidfds opened as O_PATH fds cannot be used to send signals to a
      process (cf. [2]). Signaling processes through pidfds is the
      equivalent of writing to a file. Thus, this is not an operation that
      operates "purely at the file descriptor level" as required by the
      open(2) manpage. See also [4].

/* References */
[1]:  https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/
[2]:  https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/
[3]:  https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/
[4]:  https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/
[5]:  https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/
[6]:  https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/
[7]:  https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/
[8]:  https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/
[9]:  https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy
[11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/
[12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/
[13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/
[14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/
[15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/
[16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/
[17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/
[18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/
[19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/
[20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/
[21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/
[22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/
[23]: https://lwn.net/Articles/773459/
[24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/
[25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jann Horn <jannh@google.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2019-03-05 17:03:53 +01:00
Pavel Shilovsky
bb1bccb60c CIFS: Respect SMB2 hdr preamble size in read responses
There are a couple places where we still account for 4 bytes
in the beginning of SMB2 packet which is not true in the current
code. Fix this to use a header preamble size where possible.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-04 20:06:39 -06:00
Pavel Shilovsky
66265f134a CIFS: Count SMB3 credits for malformed pending responses
Even if a response is malformed, we should count credits
granted by the server to avoid miscalculations and unnecessary
reconnects due to client or server bugs. If the response has
been received partially, the session will be reconnected anyway
on the next iteration of the demultiplex thread, so counting
credits for such cases shouldn't break things.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-04 20:06:39 -06:00
Pavel Shilovsky
82e0457af5 CIFS: Do not log credits when unmounting a share
Currently we only skip credits logging on reconnects. When
unmounting a share the number of credits on the client doesn't
matter, so skip logging in such cases too.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-04 20:06:39 -06:00
Pavel Shilovsky
6b15eb18c6 CIFS: Always reset read error to -EIO if no response
Currently we skip setting a read error to -EIO if a stored
result is -ENODATA and a response hasn't been received. With
the recent changes in read error processing there shouldn't be
cases when -ENODATA is set without a response from the server,
so reset the error to -EIO unconditionally.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-04 20:06:39 -06:00
Namjae Jeon
969ae8e8d4 cifs: Accept validate negotiate if server return NT_STATUS_NOT_SUPPORTED
Old windows version or Netapp SMB server will return
NT_STATUS_NOT_SUPPORTED since they do not allow or implement
FSCTL_VALIDATE_NEGOTIATE_INFO. The client should accept the response
provided it's properly signed.

See
https://blogs.msdn.microsoft.com/openspecification/2012/06/28/smb3-secure-dialect-negotiation/

and

MS-SMB2 validate negotiate response processing:
https://msdn.microsoft.com/en-us/library/hh880630.aspx

Samba client had already handled it.
https://bugzilla.samba.org/attachment.cgi?id=13285&action=edit

Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-04 20:06:38 -06:00
Pavel Shilovsky
c781af7e0c CIFS: Do not skip SMB2 message IDs on send failures
When we hit failures during constructing MIDs or sending PDUs
through the network, we end up not using message IDs assigned
to the packet. The next SMB packet will skip those message IDs
and continue with the next one. This behavior may lead to a server
not granting us credits until we use the skipped IDs. Fix this by
reverting the current ID to the original value if any errors occur
before we push the packet through the network stack.

This patch fixes the generic/310 test from the xfs-tests.

Cc: <stable@vger.kernel.org> # 4.19.x
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-04 20:06:12 -06:00
Steve French
4fe75c4e4b smb3: request more credits on tree connect
If we try large I/O (read or write) immediately after mount
we won't typically have enough credits because we only request
large amounts of credits on the first session setup.  So if
large I/O is attempted soon after mount we will typically only
have about 43 credits rather than 105 credits (with this patch)
available for the large i/o (which needs 64 credits minimum).

This patch requests more credits during tree connect, which
helps ensure that we have enough credits when mount completes
(between these requests and the first session setup) in order
 to start large I/O immediately after mount if needed.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-04 20:05:35 -06:00
Steve French
e8506d25f7 smb3: make default i/o size for smb3 mounts larger
We negotiate rsize mounts (and it can be overridden by user) to
typically 4MB, so using larger default I/O sizes from userspace
(changing to 1MB default i/o size returned by stat) the
performance is much better (and not just for long latency
network connections) in most use cases for SMB3 than the default I/O
size (which ends up being 128K for cp and can be even smaller for cp).
This can be 4x slower or worse depending on network latency.

By changing inode->blocksize from 32K (which was perhaps ok
for very old SMB1/CIFS) to a larger value, 1MB (but still less than
max size negotiated with the server which is 4MB, in order to minimize
risk) it significantly increases performance for the
noncached case, and slightly increases it for the cached case.
This can be changed by the user on mount (specifying bsize=
values from 16K to 16MB) to tune better for performance
for applications that depend on blocksize.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
2019-03-04 20:05:35 -06:00
Pavel Shilovsky
7b9b9edb49 CIFS: Do not reset lease state to NONE on lease break
Currently on lease break the client sets a caching level twice:
when oplock is detected and when oplock is processed. While the
1st attempt sets the level to the value provided by the server,
the 2nd one resets the level to None unconditionally.
This happens because the oplock/lease processing code was changed
to avoid races between page cache flushes and oplock breaks.
The commit c11f1df500 ("cifs: Wait for writebacks to complete
before attempting write.") fixed the races for oplocks but didn't
apply the same changes for leases resulting in overwriting the
server granted value to None. Fix this by properly processing
lease breaks.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
2019-03-04 20:05:35 -06:00
Steve French
d26e2903fc smb3: fix bytes_read statistics
/proc/fs/cifs/Stats bytes_read was double counting reads when
uncached (ie mounted with cache=none)

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2019-03-04 20:05:35 -06:00
Ronnie Sahlberg
2109464184 cifs: return -ENODATA when deleting an xattr that does not exist
BUGZILLA: https://bugzilla.kernel.org/show_bug.cgi?id=202007

When deleting an xattr/EA:
SMB2/3 servers will return SUCCESS when clients delete non-existing EAs.
This means that we need to first QUERY the server and check if the EA
exists or not so that we can return -ENODATA correctly when this happens.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-04 20:05:34 -06:00
Ronnie Sahlberg
eca0045238 cifs: add credits from unmatched responses/messages
We should add any credits granted to us from unmatched server responses.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-03-04 20:05:34 -06:00
Ronnie Sahlberg
74ea5f983f cifs: replace snprintf with scnprintf
a trivial patch that replaces all use of snprintf with scnprintf.
scnprintf() is generally seen as a safer function to use than
snprintf for many use cases.

In our case, there is no actual difference between the two since we never
look at the return value. Thus we did not have any of the bugs that
scnprintf protects against and the patch does nothing.

However, for people reading our code it will be a receipt that we
have done our due dilligence and checked our code for this type of bugs.

See the presentation "Making C Less Dangerous In The Linux Kernel"
at this years LCA

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-04 20:05:34 -06:00
Yao Liu
68e2672f8f cifs: Fix NULL pointer dereference of devname
There is a NULL pointer dereference of devname in strspn()

The oops looks something like:

  CIFS: Attempting to mount (null)
  BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  ...
  RIP: 0010:strspn+0x0/0x50
  ...
  Call Trace:
   ? cifs_parse_mount_options+0x222/0x1710 [cifs]
   ? cifs_get_volume_info+0x2f/0x80 [cifs]
   cifs_setup_volume_info+0x20/0x190 [cifs]
   cifs_get_volume_info+0x50/0x80 [cifs]
   cifs_smb3_do_mount+0x59/0x630 [cifs]
   ? ida_alloc_range+0x34b/0x3d0
   cifs_do_mount+0x11/0x20 [cifs]
   mount_fs+0x52/0x170
   vfs_kern_mount+0x6b/0x170
   do_mount+0x216/0xdc0
   ksys_mount+0x83/0xd0
   __x64_sys_mount+0x25/0x30
   do_syscall_64+0x65/0x220
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix this by adding a NULL check on devname in cifs_parse_devname()

Signed-off-by: Yao Liu <yotta.liu@ucloud.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-04 20:05:34 -06:00
Pavel Shilovsky
165df9a080 CIFS: Fix leaking locked VFS cache pages in writeback retry
If we don't find a writable file handle when retrying writepages
we break of the loop and do not unlock and put pages neither from
wdata2 nor from the original wdata. Fix this by walking through
all the remaining pages and cleanup them properly.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2019-03-04 20:05:34 -06:00
Slavomir Kaslev
ee5e001196 fs: Make splice() and tee() take into account O_NONBLOCK flag on pipes
The current implementation of splice() and tee() ignores O_NONBLOCK set
on pipe file descriptors and checks only the SPLICE_F_NONBLOCK flag for
blocking on pipe arguments.  This is inconsistent since splice()-ing
from/to non-pipe file descriptors does take O_NONBLOCK into
consideration.

Fix this by promoting O_NONBLOCK, when set on a pipe, to
SPLICE_F_NONBLOCK.

Some context for how the current implementation of splice() leads to
inconsistent behavior.  In the ongoing work[1] to add VM tracing
capability to trace-cmd we stream tracing data over named FIFOs or
vsockets from guests back to the host.

When we receive SIGINT from user to stop tracing, we set O_NONBLOCK on
the input file descriptor and set SPLICE_F_NONBLOCK for the next call to
splice().  If splice() was blocked waiting on data from the input FIFO,
after SIGINT splice() restarts with the same arguments (no
SPLICE_F_NONBLOCK) and blocks again instead of returning -EAGAIN when no
data is available.

This differs from the splice() behavior when reading from a vsocket or
when we're doing a traditional read()/write() loop (trace-cmd's
--nosplice argument).

With this patch applied we get the same behavior in all situations after
setting O_NONBLOCK which also matches the behavior of doing a
read()/write() loop instead of splice().

This change does have potential of breaking users who don't expect
EAGAIN from splice() when SPLICE_F_NONBLOCK is not set.  OTOH programs
that set O_NONBLOCK and don't anticipate EAGAIN are arguably buggy[2].

 [1] https://github.com/skaslev/trace-cmd/tree/vsock
 [2] d47e3da175/fs/read_write.c (L1425)

Signed-off-by: Slavomir Kaslev <kaslevs@vmware.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-04 16:10:17 -08:00
David S. Miller
18a4d8bf25 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-03-04 13:26:15 -08:00
Linus Torvalds
4f9020ffde Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
 "Assorted fixes that sat in -next for a while, all over the place"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  aio: Fix locking in aio_poll()
  exec: Fix mem leak in kernel_read_file
  copy_mount_string: Limit string length to PATH_MAX
  cgroup: saner refcounting for cgroup_root
  fix cgroup_do_mount() handling of failure exits
2019-03-04 13:24:27 -08:00
Linus Torvalds
736706bee3 get rid of legacy 'get_ds()' function
Every in-kernel use of this function defined it to KERNEL_DS (either as
an actual define, or as an inline function).  It's an entirely
historical artifact, and long long long ago used to actually read the
segment selector valueof '%ds' on x86.

Which in the kernel is always KERNEL_DS.

Inspired by a patch from Jann Horn that just did this for a very small
subset of users (the ones in fs/), along with Al who suggested a script.
I then just took it to the logical extreme and removed all the remaining
gunk.

Roughly scripted with

   git grep -l '(get_ds())' -- :^tools/ | xargs sed -i 's/(get_ds())/(KERNEL_DS)/'
   git grep -lw 'get_ds' -- :^tools/ | xargs sed -i '/^#define get_ds()/d'

plus manual fixups to remove a few unusual usage patterns, the couple of
inline function cases and to fix up a comment that had become stale.

The 'get_ds()' function remains in an x86 kvm selftest, since in user
space it actually does something relevant.

Inspired-by: Jann Horn <jannh@google.com>
Inspired-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-04 10:50:14 -08:00
Linus Torvalds
84c4e1f89f aio: simplify - and fix - fget/fput for io_submit()
Al Viro root-caused a race where the IOCB_CMD_POLL handling of
fget/fput() could cause us to access the file pointer after it had
already been freed:

 "In more details - normally IOCB_CMD_POLL handling looks so:

   1) io_submit(2) allocates aio_kiocb instance and passes it to
      aio_poll()

   2) aio_poll() resolves the descriptor to struct file by req->file =
      fget(iocb->aio_fildes)

   3) aio_poll() sets ->woken to false and raises ->ki_refcnt of that
      aio_kiocb to 2 (bumps by 1, that is).

   4) aio_poll() calls vfs_poll(). After sanity checks (basically,
      "poll_wait() had been called and only once") it locks the queue.
      That's what the extra reference to iocb had been for - we know we
      can safely access it.

   5) With queue locked, we check if ->woken has already been set to
      true (by aio_poll_wake()) and, if it had been, we unlock the
      queue, drop a reference to aio_kiocb and bugger off - at that
      point it's a responsibility to aio_poll_wake() and the stuff
      called/scheduled by it. That code will drop the reference to file
      in req->file, along with the other reference to our aio_kiocb.

   6) otherwise, we see whether we need to wait. If we do, we unlock the
      queue, drop one reference to aio_kiocb and go away - eventual
      wakeup (or cancel) will deal with the reference to file and with
      the other reference to aio_kiocb

   7) otherwise we remove ourselves from waitqueue (still under the
      queue lock), so that wakeup won't get us. No async activity will
      be happening, so we can safely drop req->file and iocb ourselves.

  If wakeup happens while we are in vfs_poll(), we are fine - aio_kiocb
  won't get freed under us, so we can do all the checks and locking
  safely. And we don't touch ->file if we detect that case.

  However, vfs_poll() most certainly *does* touch the file it had been
  given. So wakeup coming while we are still in ->poll() might end up
  doing fput() on that file. That case is not too rare, and usually we
  are saved by the still present reference from descriptor table - that
  fput() is not the final one.

  But if another thread closes that descriptor right after our fget()
  and wakeup does happen before ->poll() returns, we are in trouble -
  final fput() done while we are in the middle of a method:

Al also wrote a patch to take an extra reference to the file descriptor
to fix this, but I instead suggested we just streamline the whole file
pointer handling by submit_io() so that the generic aio submission code
simply keeps the file pointer around until the aio has completed.

Fixes: bfe4037e72 ("aio: implement IOCB_CMD_POLL")
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: syzbot+503d4cc169fcec1cb18c@syzkaller.appspotmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-04 10:32:48 -08:00
Hou Tao
5e3cc1ee14 9p: use inode->i_lock to protect i_size_write() under 32-bit
Use inode->i_lock to protect i_size_write(), else i_size_read() in
generic_fillattr() may loop infinitely in read_seqcount_begin() when
multiple processes invoke v9fs_vfs_getattr() or v9fs_vfs_getattr_dotl()
simultaneously under 32-bit SMP environment, and a soft lockup will be
triggered as show below:

  watchdog: BUG: soft lockup - CPU#5 stuck for 22s! [stat:2217]
  Modules linked in:
  CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
  Hardware name: Generic DT based system
  PC is at generic_fillattr+0x104/0x108
  LR is at 0xec497f00
  pc : [<802b8898>]    lr : [<ec497f00>]    psr: 200c0013
  sp : ec497e20  ip : ed608030  fp : ec497e3c
  r10: 00000000  r9 : ec497f00  r8 : ed608030
  r7 : ec497ebc  r6 : ec497f00  r5 : ee5c1550  r4 : ee005780
  r3 : 0000052d  r2 : 00000000  r1 : ec497f00  r0 : ed608030
  Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
  Control: 10c5387d  Table: ac48006a  DAC: 00000051
  CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
  Hardware name: Generic DT based system
  Backtrace:
  [<8010d974>] (dump_backtrace) from [<8010dc88>] (show_stack+0x20/0x24)
  [<8010dc68>] (show_stack) from [<80a1d194>] (dump_stack+0xb0/0xdc)
  [<80a1d0e4>] (dump_stack) from [<80109f34>] (show_regs+0x1c/0x20)
  [<80109f18>] (show_regs) from [<801d0a80>] (watchdog_timer_fn+0x280/0x2f8)
  [<801d0800>] (watchdog_timer_fn) from [<80198658>] (__hrtimer_run_queues+0x18c/0x380)
  [<801984cc>] (__hrtimer_run_queues) from [<80198e60>] (hrtimer_run_queues+0xb8/0xf0)
  [<80198da8>] (hrtimer_run_queues) from [<801973e8>] (run_local_timers+0x28/0x64)
  [<801973c0>] (run_local_timers) from [<80197460>] (update_process_times+0x3c/0x6c)
  [<80197424>] (update_process_times) from [<801ab2b8>] (tick_nohz_handler+0xe0/0x1bc)
  [<801ab1d8>] (tick_nohz_handler) from [<80843050>] (arch_timer_handler_virt+0x38/0x48)
  [<80843018>] (arch_timer_handler_virt) from [<80180a64>] (handle_percpu_devid_irq+0x8c/0x240)
  [<801809d8>] (handle_percpu_devid_irq) from [<8017ac20>] (generic_handle_irq+0x34/0x44)
  [<8017abec>] (generic_handle_irq) from [<8017b344>] (__handle_domain_irq+0x6c/0xc4)
  [<8017b2d8>] (__handle_domain_irq) from [<801022e0>] (gic_handle_irq+0x4c/0x88)
  [<80102294>] (gic_handle_irq) from [<80101a30>] (__irq_svc+0x70/0x98)
  [<802b8794>] (generic_fillattr) from [<8056b284>] (v9fs_vfs_getattr_dotl+0x74/0xa4)
  [<8056b210>] (v9fs_vfs_getattr_dotl) from [<802b8904>] (vfs_getattr_nosec+0x68/0x7c)
  [<802b889c>] (vfs_getattr_nosec) from [<802b895c>] (vfs_getattr+0x44/0x48)
  [<802b8918>] (vfs_getattr) from [<802b8a74>] (vfs_statx+0x9c/0xec)
  [<802b89d8>] (vfs_statx) from [<802b9428>] (sys_lstat64+0x48/0x78)
  [<802b93e0>] (sys_lstat64) from [<80101000>] (ret_fast_syscall+0x0/0x28)

[dominique.martinet@cea.fr: updated comment to not refer to a function
in another subsystem]
Link: http://lkml.kernel.org/r/20190124063514.8571-2-houtao1@huawei.com
Cc: stable@vger.kernel.org
Fixes: 7549ae3e81 ("9p: Use the i_size_[read, write]() macros instead of using inode->i_size directly.")
Reported-by: Xing Gaopeng <xingaopeng@huawei.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
2019-03-03 14:04:07 +09:00
Trond Myklebust
067c469671 NFSv4.1: Bump the default callback session slot count to 16
Users can still control this value explicitly using the
max_session_cb_slots module parameter, but let's bump the default
up to 16 for now.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-02 16:25:26 -05:00
Trond Myklebust
cefa587a40 NFS/flexfiles: Clean up mirror DS initialisation
Get rid of the redundant parameter and rename the function
ff_layout_mirror_valid() to ff_layout_init_mirror_ds() for clarity.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 22:37:39 -05:00
Trond Myklebust
29a23909e4 NFS/flexfiles: Remove dead code in ff_layout_mirror_valid()
nfs4_ff_alloc_deviceid_node() guarantees that if mirror->mirror_ds is
a valid pointer, then so is mirror->mirror_ds->ds.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 22:37:38 -05:00
Trond Myklebust
4cbc8a571c NFS/flexfile: Simplify nfs4_ff_layout_select_ds_stateid()
Pass in a pointer to the mirror rather than forcing another
array access.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 22:37:38 -05:00
Trond Myklebust
626d48b12c NFS/flexfile: Simplify nfs4_ff_layout_ds_version()
Pass in a pointer to the mirror rather than forcing another
array access.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 22:37:38 -05:00
Trond Myklebust
312cd4cb12 NFS/flexfiles: Simplify ff_layout_get_ds_cred()
Pass in a pointer to the mirror rather than forcing another
array access.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 22:37:38 -05:00
Trond Myklebust
561d6f8aaf NFS/flexfiles: Simplify nfs4_ff_find_or_create_ds_client()
Pass in a pointer to the mirror rather than forcing another
array access.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 22:37:38 -05:00
Trond Myklebust
749da527b3 NFS/flexfiles: Simplify nfs4_ff_layout_select_ds_fh()
Pass in a pointer to the mirror rather than having to retrieve it from
the array and then verify the resulting pointer.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 22:37:38 -05:00
Trond Myklebust
76c6690522 NFS/flexfiles: Speed up read failover when DSes are down
If we notice that a DS may be down, we should attempt to read from the
other mirrors first before we go back to retry the dead DS.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 22:37:38 -05:00
Trond Myklebust
17aaec8167 NFS/flexfiles: Don't invalidate DS deviceids for being unresponsive
If the DS is unresponsive, we want to just mark it as such, while
reporting the errors. If the server later returns the same deviceid
in a new layout, then we don't want to have to look it up again.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 22:37:38 -05:00
Trond Myklebust
d082d4b5a0 NFS/flexfiles: Remove bogus checks for invalid deviceids
We already check the deviceids before we start the RPC call.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 22:37:38 -05:00
Trond Myklebust
0a156dd582 NFS/flexfiles: Avoid unnecessary layout invalidations
In ff_layout_mirror_valid() we may not want to invalidate the layout
segment despite the call to GETDEVICEINFO failing. The reason is that
a read may still be able to make progress on another mirror.

So instead we let the caller (in this case nfs4_ff_layout_prepare_ds())
decide whether or not it needs to invalidate.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 22:37:37 -05:00
Trond Myklebust
2444ff277a NFS/flexfiles: refactor calls to fs4_ff_layout_prepare_ds()
While we may want to skip attempting to connect to a downed mirror
when we're deciding which mirror to select for a read, we do not
want to do so once we've committed to attempting the I/O in
ff_layout_read/write_pagelist(), or ff_layout_initiate_commit()

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 22:37:37 -05:00
Trond Myklebust
18c0778a65 NFSv4: Handle early exit in layoutget by returning an error
If the LAYOUTGET rpc call exits early without an error, convert it to
EAGAIN.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 22:37:37 -05:00
Trond Myklebust
f0922a6c0c NFS/flexfiles: Send LAYOUTERROR when failing over mirrored reads
When a read to the preferred mirror returns an error, the flexfiles
driver records the error in the inode list and currently marks the
layout for return before failing over the attempted read to the next
mirror.
What we actually want to do is fire off a LAYOUTERROR to notify the
MDS that there is an issue with the preferred mirror, then we fail
over. Only once we've failed to read from all mirrors should we
return the layout.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 22:37:37 -05:00
Matthew Wilcox
e4b3448bc3 dax: Flush partial PMDs correctly
The radix tree would rewind the index in an iterator to the lowest index
of a multi-slot entry.  The XArray iterators instead leave the index
unchanged, but I overlooked that when converting DAX from the radix tree
to the XArray.  Adjust the index that we use for flushing to the start
of the PMD range.

Fixes: c1901cd33c ("page cache: Convert find_get_entries_tag to XArray")
Cc: <stable@vger.kernel.org>
Reported-by: Piotr Balcer <piotr.balcer@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-03-01 17:24:48 -08:00
Trond Myklebust
3eb86093ea NFSv4.2: Add client support for the generic 'layouterror' RPC call
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 16:20:16 -05:00
Trond Myklebust
a79f194aa4 NFSv4/flexfiles: Abort I/O early if the layout segment was invalidated
If a layout segment gets invalidated while a pNFS I/O operation
is queued for transmission, then we ideally want to abort
immediately. This is particularly the case when there is a large
number of I/O related RPCs queued in the RPC layer, and the layout
segment gets invalidated due to an ENOSPC error, or an EACCES (because
the client was fenced). We may end up forced to spam the MDS with a
lot of otherwise unnecessary LAYOUTERRORs after that I/O fails.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 16:20:16 -05:00
Trond Myklebust
39a5201a2b NFSv4/pnfs: Fix barriers in nfs4_mark_deviceid_unavailable()
Fix the memory barriers in nfs4_mark_deviceid_unavailable() and
nfs4_test_deviceid_unavailable().

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 16:20:16 -05:00
Trond Myklebust
762bb7e973 NFS/flexfiles: Fix up sparse RCU annotations
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 16:20:16 -05:00
Trond Myklebust
108bb4afd3 NFSv4/flexfiles: Fix invalid deref in FF_LAYOUT_DEVID_NODE()
If the attempt to instantiate the mirror's layout DS pointer failed,
then that pointer may hold a value of type ERR_PTR(), so we need
to check that before we dereference it.

Fixes: 65990d1afb ("pNFS/flexfiles: Fix a deadlock on LAYOUTGET")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 16:20:16 -05:00
Anna Schumaker
1a3466aed3 NFS: Add missing encode / decode sequence_maxsz to v4.2 operations
These really should have been there from the beginning, but we never
noticed because there was enough slack in the RPC request for the extra
bytes. Chuck's recent patch to use au_cslack and au_rslack to compute
buffer size shrunk the buffer enough that this was now a problem for
SEEK operations on my test client.

Fixes: f4ac1674f5 ("nfs: Add ALLOCATE support")
Fixes: 2e72448b07 ("NFS: Add COPY nfs operation")
Fixes: cb95deea0b ("NFS OFFLOAD_CANCEL xdr")
Fixes: 624bd5b7b6 ("nfs: Add DEALLOCATE support")
Fixes: 1c6dcbe5ce ("NFS: Implement SEEK")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 16:19:46 -05:00
Trond Myklebust
c71c46f015 NFSv4.1: Don't process the sequence op more than once.
Ensure that if we call nfs41_sequence_process() a second time for the
same rpc_task, then we only process the results once.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01 12:16:28 -05:00