Ensure that sockets added to a sock{map|hash} that is not in the
ESTABLISHED state is rejected.
Fixes: 1aa12bdf1b ("bpf: sockmap, add sock close() hook to remove socks")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Paolo writes:
"It's mostly small bugfixes and cleanups, mostly around x86 nested
virtualization. One important change, not related to nested
virtualization, is that the ability for the guest kernel to trap
CPUID instructions (in Linux that's the ARCH_SET_CPUID arch_prctl) is
now masked by default. This is because the feature is detected
through an MSR; a very bad idea that Intel seems to like more and
more. Some applications choke if the other fields of that MSR are
not initialized as on real hardware, hence we have to disable the
whole MSR by default, as was the case before Linux 4.12."
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (23 commits)
KVM: nVMX: Fix bad cleanup on error of get/set nested state IOCTLs
kvm: selftests: Add platform_info_test
KVM: x86: Control guest reads of MSR_PLATFORM_INFO
KVM: x86: Turbo bits in MSR_PLATFORM_INFO
nVMX x86: Check VPID value on vmentry of L2 guests
nVMX x86: check posted-interrupt descriptor addresss on vmentry of L2
KVM: nVMX: Wake blocked vCPU in guest-mode if pending interrupt in virtual APICv
KVM: VMX: check nested state and CR4.VMXE against SMM
kvm: x86: make kvm_{load|put}_guest_fpu() static
x86/hyper-v: rename ipi_arg_{ex,non_ex} structures
KVM: VMX: use preemption timer to force immediate VMExit
KVM: VMX: modify preemption timer bit only when arming timer
KVM: VMX: immediately mark preemption timer expired only for zero value
KVM: SVM: Switch to bitmap_zalloc()
KVM/MMU: Fix comment in walk_shadow_page_lockless_end()
kvm: selftests: use -pthread instead of -lpthread
KVM: x86: don't reset root in kvm_mmu_setup()
kvm: mmu: Don't read PDPTEs when paging is not enabled
x86/kvm/lapic: always disable MMIO interface in x2APIC mode
KVM: s390: Make huge pages unavailable in ucontrol VMs
...
thread_stack__process() is used to create call paths for database
export. Improve the handling of trace begin / end to allow for a trace
that ends in a call.
Previously, the Intel PT decoder would indicate begin / end by a branch
from / to zero. That hides useful information, in particular when a
trace ends with a call. Before remedying that, enhance the thread stack
so that it identifies the trace end by the flag instead of by ip == 0.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20180920130048.31432-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
thread_stack__event() is used to create call stacks, by keeping track of
calls and returns. Improve the handling of trace begin / end to allow
for a trace that ends in a call.
Previously, the Intel PT decoder would indicate begin / end by a branch
from / to zero. That hides useful information, in particular when a
trace ends with a call. Before remedying that, enhance the thread stack
so that it does not expect to see the 'return' for a 'call' that ends
the trace.
Committer notes:
Added this:
return thread_stack__push(thread->ts, ret_addr,
- flags && PERF_IP_FLAG_TRACE_END);
+ flags & PERF_IP_FLAG_TRACE_END);
To fix problem spotted by:
debian:9: clang version 3.8.1-24 (tags/RELEASE_381/final)
debian:experimental: clang version 6.0.1-6 (tags/RELEASE_601/final)
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20180920130048.31432-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A so-called "MC-aware" mode has recently been enabled in mlxsw. In
MC-aware mode, BUM traffic is handled in a special way so that when a
switch is flooded with BUM, UC performance isn't unduly impacted.
Without enablement of this mode, a stream of BUM traffic can cause
sustained UC throughput drop in excess of 99 %.
Add a test for this behavior. Compare how much UC throughput degrades as
a stream of broadcast frames floods the switch. A minimal degradation is
tolerated to cover for glitches in traffic injection performance.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some selftests need to tweak MTU of an interface, and naturally should
at teardown restore the MTU back to the original value. Add two
functions to facilitate this MTU handling: mtu_set() to change MTU
value, and mtu_reset() to change it back to what it was before.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add branch types to cover different combinations with "trace begin" or
"trace end".
Previously, the Intel PT decoder would indicate begin / end by a branch
from / to zero. That hides useful information, in particular when a
trace ends with a call. Before remedying that, prepare the database
export to export branch types with more combinations that include trace
begin / end. In those cases extend the descriptions to include 'trace
begin' and 'trace end' separately.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20180920130048.31432-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow for different combinations of sample flags with "trace begin" or
"trace end".
Previously, the Intel PT decoder would indicate begin / end by a branch
from / to zero. That hides useful information, in particular when a
trace ends with a call. Before remedying that, prepare 'perf script' to
display sample flags with more combinations that include trace begin /
end. In those cases display 'tr start' and 'tr end' separately.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20180920130048.31432-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test guest access to MSR_PLATFORM_INFO when the capability is enabled
or disabled.
Signed-off-by: Drew Schmitt <dasch@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I run into the following error
testing/selftests/kvm/dirty_log_test.c:285: undefined reference to `pthread_create'
testing/selftests/kvm/dirty_log_test.c:297: undefined reference to `pthread_join'
collect2: error: ld returned 1 exit status
my gcc version is gcc version 4.8.4
"-pthread" would work everywhere
Signed-off-by: Lei Yang <Lei.Yang@windriver.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
libc_compat.h is used by libbpf so make sure it's licensed under
LGPL or BSD license. The license change should be OK, I'm the only
author of the file.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently sym and dso require printing ip and addr because the print
function is tied to those outputs. With callindent it makes sense to
print the symbol or dso without numerical IP or ADDR. So change the
dependency check to only check the underlying attribute.
Also the branch target output relies on the user_set flag to determine
if the branch target should be implicitely printed. When modifying the
fields with + or - also set user_set, so that ADDR can be removed. We
also need to set wildcard_set to make the initial sanity check pass.
This allows to remove a lot of noise in callindent output by dropping
the numerical addresses, which are not all that useful.
Before
% perf script --itrace=cr -F +callindent
swapper 0 [000] 156546.354971: 1 branches: pt_config 0 [unknown] ([unknown]) => ffffffff81010486 pt_config ([kernel.kallsyms])
swapper 0 [000] 156546.354971: 1 branches: pt_config ffffffff81010499 pt_config ([kernel.kallsyms]) => ffffffff8101063e pt_event_add ([kernel.kallsyms])
swapper 0 [000] 156546.354971: 1 branches: pt_event_add ffffffff81010635 pt_event_add ([kernel.kallsyms]) => ffffffff8115e687 event_sched_in.isra.107 ([kernel.kallsyms])
swapper 0 [000] 156546.354971: 1 branches: perf_pmu_enable ffffffff8115e726 event_sched_in.isra.107 ([kernel.kallsyms]) => ffffffff811579b0 perf_pmu_enable ([kernel.kallsyms])
swapper 0 [000] 156546.354971: 1 branches: perf_pmu_nop_void ffffffff81151730 perf_pmu_nop_void ([kernel.kallsyms]) => ffffffff8115e72b event_sched_in.isra.107 ([kernel.kallsyms])
swapper 0 [000] 156546.354971: 1 branches: event_sched_in.isra.107 ffffffff8115e737 event_sched_in.isra.107 ([kernel.kallsyms]) => ffffffff8115e7a5 group_sched_in ([kernel.kallsyms])
swapper 0 [000] 156546.354971: 1 branches: __x86_indirect_thunk_rax ffffffff8115e7f6 group_sched_in ([kernel.kallsyms]) => ffffffff81a03000 __x86_indirect_thunk_rax ([kernel.kallsyms])
After
% perf script --itrace=cr -F +callindent,-ip,-sym,-symoff
swapper 0 [000] 156546.354971: 1 branches: pt_config
swapper 0 [000] 156546.354971: 1 branches: pt_config
swapper 0 [000] 156546.354971: 1 branches: pt_event_add
swapper 0 [000] 156546.354971: 1 branches: perf_pmu_enable
swapper 0 [000] 156546.354971: 1 branches: perf_pmu_nop_void
swapper 0 [000] 156546.354971: 1 branches: event_sched_in.isra.107
swapper 0 [000] 156546.354971: 1 branches: __x86_indirect_thunk_rax
swapper 0 [000] 156546.354971: 1 branches: perf_pmu_nop_int
swapper 0 [000] 156546.354971: 1 branches: group_sched_in
swapper 0 [000] 156546.354971: 1 branches: event_filter_match
swapper 0 [000] 156546.354971: 1 branches: event_filter_match
swapper 0 [000] 156546.354971: 1 branches: group_sched_in
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/r/20180918123214.26728-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There isn't subcommand `version` when typing `perf help`.
Before :
$ perf help | grep version
usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
So add perf-version in command-list.txt for listing it when typing `perf
help`.
After :
$ perf help | grep version
usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS]
version display the version of perf binary
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20180919074911.41931-1-qpakzk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building in ClearLinux using 'make PYTHON=python3' with gcc 8.2.1
it fails with:
GEN /tmp/build/perf/python/perf.so
In file included from /usr/include/python3.7m/Python.h:126,
from /git/linux/tools/perf/util/python.c:2:
/usr/include/python3.7m/import.h:58:24: error: redundant redeclaration of ‘_PyImport_AddModuleObject’ [-Werror=redundant-decls]
PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *, PyObject *);
^~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/python3.7m/import.h:47:24: note: previous declaration of ‘_PyImport_AddModuleObject’ was here
PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *name,
^~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
error: command 'gcc' failed with exit status 1
And indeed there is a redundant declaration in that Python.h file, one
with parameter names and the other without, so just add
-Wno-error=redundant-decls to the python setup instructions.
Now perf builds with gcc in ClearLinux with the following Dockerfile:
# docker.io/acmel/linux-perf-tools-build-clearlinux:latest
FROM docker.io/clearlinux:latest
MAINTAINER Arnaldo Carvalho de Melo <acme@kernel.org>
RUN swupd update && \
swupd bundle-add sysadmin-basic-dev
RUN mkdir -m 777 -p /git /tmp/build/perf /tmp/build/objtool /tmp/build/linux && \
groupadd -r perfbuilder && \
useradd -m -r -g perfbuilder perfbuilder && \
chown -R perfbuilder.perfbuilder /tmp/build/ /git/
USER perfbuilder
COPY rx_and_build.sh /
ENV EXTRA_MAKE_ARGS=PYTHON=python3
ENTRYPOINT ["/rx_and_build.sh"]
Now to figure out why the build fails with clang, that is present in the
above container as detected by the rx_and_build.sh script:
clang version 6.0.1 (tags/RELEASE_601/final)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /usr/sbin
make: Entering directory '/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libslang: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
Makefile.config:331: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop.
make[1]: *** [Makefile.perf:206: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/git/linux/tools/perf'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-c3khb9ac86s00qxzjrueomme@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When ordering events, we use preallocated buffers to store separate
events. Those buffers currently don't have their own struct, but since
they are basically an array of 'struct ordered_event' objects, we use
the first event to hold buffers data - list head, that holds all buffers
together:
struct ordered_events {
...
struct ordered_event *buffer;
...
};
struct ordered_event {
u64 timestamp;
u64 file_offset;
union perf_event *event;
struct list_head list;
};
This is quite convoluted and error prone as demonstrated by free-ing
issue discovered and fixed by Stephane in here [1].
This patch adds the 'struct ordered_events_buffer' object, that holds
the buffer data and frees it up properly.
[1] - https://marc.info/?l=linux-kernel&m=153376761329335&w=2
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Stephane Eranian <eranian@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180907102455.7030-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are cases where the test is not expecting to have the transaction
aborted, but, the test process might have been rescheduled, either in the
OS level or by KVM (if it is running on a KVM guest machine). The process
reschedule will cause a treclaim/recheckpoint which will cause the
transaction to doom, aborting the transaction as soon as the process is
rescheduled back to the CPU. This might cause the test to fail, but this is
not a failure in essence.
If that is the case, TEXASR[FC] is indicated with either
TM_CAUSE_RESCHEDULE or TM_CAUSE_KVM_RESCHEDULE for KVM interruptions.
In this scenario, ignore these two failures and avoid the whole test to
return failure.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix the build on !_GNU_SOURCE libc systems such as Alpine Linux/musl
libc due to usage of strerror_r glibc variant on libbpf (Arnaldo Carvalho de Melo)
- Fix out-of-tree asciidoctor man page generation (Ben Hutchings)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The cleanup function uses "$CMD 2 > /dev/null", which doesn't actually
send stderr to /dev/null, so when the netns doesn't exist, the error
message is shown. Use "2> /dev/null" instead, so that those messages
disappear, as was intended.
Fixes: d1f1b9cbf3 ("selftests: net: Introduce first PMTU test")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
