There are two unit test cases, which should encode
TYPEDEF type, but instead encode PTR type.
The error is flagged out after enforcing name
checking in the previous patch.
Fixes: c0fa1b6c3e ("bpf: btf: Add BTF tests")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
CONFIG_FTRACE_SYSCALLS=y is required for get_cgroup_id_user test case
this test reads a file from debug trace path
/sys/kernel/debug/tracing/events/syscalls/sys_enter_nanosleep/id
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Similar to msg_pull_data and msg_push_data add a set of options to
have msg_pop_data() exercised.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add the necessary header definitions to tools for new
msg_pop_data_helper.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Disable BH while holding list spinlock in nf_conncount, from
Taehee Yoo.
2) List corruption in nf_conncount, also from Taehee.
3) Fix race that results in leaving around an empty list node in
nf_conncount, from Taehee Yoo.
4) Proper chain handling for inactive chains from the commit path,
from Florian Westphal. This includes a selftest for this.
5) Do duplicate rule handles when replacing rules, also from Florian.
6) Remove net_exit path in xt_RATEEST that results in splat, from Taehee.
7) Possible use-after-free in nft_compat when releasing extensions.
From Florian.
8) Memory leak in xt_hashlimit, from Taehee.
9) Call ip_vs_dst_notifier after ipv6_dev_notf, from Xin Long.
10) Fix cttimeout with udplite and gre, from Florian.
11) Preserve oif for IPv6 link-local generated traffic from mangle
table, from Alin Nastac.
12) Missing error handling in masquerade notifiers, from Taehee Yoo.
13) Use mutex to protect registration/unregistration of masquerade
extensions in order to prevent a race, from Taehee.
14) Incorrect condition check in tree_nodes_free(), also from Taehee.
15) Fix chain counter leak in rule replacement path, from Taehee.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If pkg-config is available, use it to define the CFLAGS and
LDLIBS needed for libmount; else, use the current hard-coded
paths and options.
Using pkg-config is very helpful for cross-compilation
environments, and is sometimes readily available on developer
boxes to ensure we get the right compiler/linker options for
the given package.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y is required for fw_fallback.sh.
Without it, fw_fallback.sh fails with 'usermode helper disabled so
ignoring test'. Enable the config in selftest so that it gets built by
default.
Signed-off-by: Dan Rue <dan.rue@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
"diff -Z" is used to trim the trailing whitespace when comparing the
loaded firmware file with the source firmware file. However, per the
comment in the source code, -Z should not be necessary. In testing, the
input and output files are identical.
Additionally, -Z is not a standard option and is not available in
environments such as busybox. When -Z is not supported, diff fails with
a usage error, which is suppressed, but then causes read_firmwares() to
exit with a false failure message.
Signed-off-by: Dan Rue <dan.rue@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
The current shebang does not work in environments that only support python3
and have no python2 installed. Plus there does not seem to be a way to
support python2 and python3 at the same time. Since all known python3 issues
were fixed, and as python3 is the way to go, let's switch over.
Note that the code is still python2 compliant, so folks in bad use can
simply revert the shebang.
Suggested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document API and ABI for libbpf: naming convention, symbol visibility,
ABI versioning.
This is just a starting point. Documentation can be significantly
extended in the future to cover more topics.
ABI versioning section touches only a few basic points with a link to
more comprehensive documentation from Ulrich Drepper. This section can
be extended in the future when there is better understanding what works
well and what not so well in libbpf development process and production
usage.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since ABI versioning info is kept separately from the code it's easy to
forget to update it while adding a new API.
Add simple verification that all global symbols exported with LIBBPF_API
are versioned in libbpf.map version script.
The idea is to check that number of global symbols in libbpf-in.o, that
is the input to the linker, matches with number of unique versioned
symbols in libbpf.so, that is the output of the linker. If these numbers
don't match, it may mean some symbol was not versioned and make will
fail.
"Unique" means that if a symbol is present in more than one version of
ABI due to ABI changes, it'll be counted once.
Another option to calculate number of global symbols in the "input"
could be to count number of LIBBPF_ABI entries in C headers but it seems
to be fragile.
Example of output when a symbol is missing in version script:
...
LD libbpf-in.o
LINK libbpf.a
LINK libbpf.so
Warning: Num of global symbols in libbpf-in.o (115) does NOT match
with num of versioned symbols in libbpf.so (114). Please make sure all
LIBBPF_API symbols are versioned in libbpf.map.
make: *** [check_abi] Error 1
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
More and more projects use libbpf and one day it'll likely be packaged
and distributed as DSO and that requires ABI versioning so that both
compatible and incompatible changes to ABI can be introduced in a safe
way in the future without breaking executables dynamically linked with a
previous version of the library.
Usual way to do ABI versioning is version script for the linker. Add
such a script for libbpf. All global symbols currently exported via
LIBBPF_API macro are added to the version script libbpf.map.
The version name LIBBPF_0.0.1 is constructed from the name of the
library + version specified by $(LIBBPF_VERSION) in Makefile.
Version script does not duplicate the work done by LIBBPF_API macro, it
rather complements it. The macro is used at compile time and can be used
by compiler to do optimization that can't be done at link time, it is
purely about global symbol visibility. The version script, in turn, is
used at link time and takes care of ABI versioning. Both techniques are
described in details in [1].
Whenever ABI is changed in the future, version script should be changed
appropriately.
[1] https://www.akkadia.org/drepper/dsohowto.pdf
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
s/btf_get_from_id/btf__get_from_id/ to restore the API naming convention.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The selftest test_btf is changed to test both jit and non-jit.
The test result should be the same regardless of whether jit
is enabled or not.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-11-26
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Extend BTF to support function call types and improve the BPF
symbol handling with this info for kallsyms and bpftool program
dump to make debugging easier, from Martin and Yonghong.
2) Optimize LPM lookups by making longest_prefix_match() handle
multiple bytes at a time, from Eric.
3) Adds support for loading and attaching flow dissector BPF progs
from bpftool, from Stanislav.
4) Extend the sk_lookup() helper to be supported from XDP, from Nitin.
5) Enable verifier to support narrow context loads with offset > 0
to adapt to LLVM code generation (currently only offset of 0 was
supported). Add test cases as well, from Andrey.
6) Simplify passing device functions for offloaded BPF progs by
adding callbacks to bpf_prog_offload_ops instead of ndo_bpf.
Also convert nfp and netdevsim to make use of them, from Quentin.
7) Add support for sock_ops based BPF programs to send events to
the perf ring-buffer through perf_event_output helper, from
Sowmini and Daniel.
8) Add read / write support for skb->tstamp from tc BPF and cg BPF
programs to allow for supporting rate-limiting in EDT qdiscs
like fq from BPF side, from Vlad.
9) Extend libbpf API to support map in map types and add test cases
for it as well to BPF kselftests, from Nikita.
10) Account the maximum packet offset accessed by a BPF program in
the verifier and use it for optimizing nfp JIT, from Jiong.
11) Fix error handling regarding kprobe_events in BPF sample loader,
from Daniel T.
12) Add support for queue and stack map type in bpftool, from David.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2018-11-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix an off-by-one bug when adjusting subprog start offsets after
patching, from Edward.
2) Fix several bugs such as overflow in size allocation in queue /
stack map creation, from Alexei.
3) Fix wrong IPv6 destination port byte order in bpf_sk_lookup_udp
helper, from Andrey.
4) Fix several bugs in bpftool such as preventing an infinite loop
in get_fdinfo, error handling and man page references, from Quentin.
5) Fix a warning in bpf_trace_printk() that wasn't catching an
invalid format string, from Martynas.
6) Fix a bug in BPF cgroup local storage where non-atomic allocation
was used in atomic context, from Roman.
7) Fix a NULL pointer dereference bug in bpftool from reallocarray()
error handling, from Jakub and Wen.
8) Add a copy of pkt_cls.h and tc_bpf.h uapi headers to the tools
include infrastructure so that bpftool compiles on older RHEL7-like
user space which does not ship these headers, from Yonghong.
9) Fix BPF kselftests for user space where to get ping test working
with ping6 and ping -6, from Li.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Current core-pkey selftest fails if the test runs without privileges to
write into the core pattern file (/proc/sys/kernel/core_pattern). This
causes the test to fail and give the impression that the subsystem being
tested is broken, when, in fact, the test is being executed without the
proper privileges. This is the current error:
test: core_pkey
tags: git_version:v4.19-3-g9e3363be9bce-dirty
Error writing to core_pattern file: Permission denied
failure: core_pkey
This patch simply skips this test if it runs without the proper privileges,
avoiding this undesired failure.
CC: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
CC: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch creates a new macro that skips a test and prints a message to
stderr. This is useful to give an idea why the tests is being skipped,
other than just skipping the test blindly.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some ptrace selftests are passing input operands using a constraint that
can allocate any register for the operand, and using these registers on
load/store operations.
If the register allocated by the compiler happens to be zero (r0), it might
cause an invalid memory address access, since load and store operations
consider the content of 0x0 address if the base register is r0, instead of
the content of the r0 register. For example:
r1 := 0xdeadbeef
r0 := 0xdeadbeef
ld r2, 0(1) /* will load into r2 the content of r1 address */
ld r2, 0(0) /* will load into r2 the content of 0x0 */
In order to avoid this possible problem, the inline assembly constraint
should be aware that these registers will be used as a base register, thus,
r0 should not be allocated.
Other than that, this patch removes inline assembly operands that are not
used by the tests.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Packet sockets with PACKET_TX_RING send skbs with user data in frags.
Before commit 5cd8d46ea1 ("packet: copy user buffers before orphan
or clone") ring slots could be released prematurely, possibly allowing
a process to overwrite data still in flight.
This test opens two packet sockets, one to send and one to read.
The sender has a tx ring of one slot. It sends two packets with
different payload, then reads both and verifies their payload.
Before the above commit, both receive calls return the same data as
the send calls use the same buffer. From the commit, the clone
needed for looping onto a packet socket triggers an skb_copy_ubufs
to create a private copy. The separate sends each arrive correctly.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I noticed that these two new BPF Maps are not defined in bpftool.
This patch defines those two maps and adds their names to the
bpftool-map documentation.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
currently by default libbpf's bpf_object__open requires
bpf's program to specify version in a code because of two things:
1) default prog type is set to KPROBE
2) KPROBE requires (in kernel/bpf/syscall.c) version to be specified
in this patch i'm changing default prog type to UNSPEC and also changing
requirments for version's section to be present in object file.
now it would reflect what we have today in kernel
(only KPROBE prog type requires for version to be explicitly set).
v1 -> v2:
- RFC tag has been dropped
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull power management fixes from Rafael Wysocki:
"These fix two issues in the Operating Performance Points (OPP)
framework, one cpufreq driver issue, one problem related to the tasks
freezer and a few build-related issues in the cpupower utility.
Specifics:
- Fix tasks freezer deadlock in de_thread() that occurs if one of its
sub-threads has been frozen already (Chanho Min).
- Avoid registering a platform device by the ti-cpufreq driver on
platforms that cannot use it (Dave Gerlach).
- Fix a mistake in the ti-opp-supply operating performance points
(OPP) driver that caused an incorrect reference voltage to be used
and make it adjust the minimum voltage dynamically to avoid hangs
or crashes in some cases (Keerthy).
- Fix issues related to compiler flags in the cpupower utility and
correct a linking problem in it by renaming a file with a duplicate
name (Jiri Olsa, Konstantin Khlebnikov)"
* tag 'pm-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
exec: make de_thread() freezable
cpufreq: ti-cpufreq: Only register platform_device when supported
opp: ti-opp-supply: Correct the supply in _get_optimal_vdd_voltage call
opp: ti-opp-supply: Dynamically update u_volt_min
tools cpupower: Override CFLAGS assignments
tools cpupower debug: Allow to use outside build flags
tools/power/cpupower: fix compilation with STATIC=true
This could be used to rate limit egress traffic in concert with a qdisc
which supports Earliest Departure Time, such as FQ.
Write access from cg skb progs only with CAP_SYS_ADMIN, since the value
will be used by downstream qdiscs. It might make sense to relax this.
Changes v1 -> v2:
- allow access from cg skb, write only with CAP_SYS_ADMIN
Signed-off-by: Vlad Dumitrescu <vladum@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
commit 3327a9c463 ("selftests: add functionals test for UDP GRO")
make use of ipv6 NAT, but such a feature is not currently implied by
selftests. Since the 'ip[6]tables' commands may actually create nft rules,
depending on the specific user-space version, let's pull both NF and
NFT nat modules plus the needed deps.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 3327a9c463 ("selftests: add functionals test for UDP GRO")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan writes:
First set of new device support, features and cleanups for IIO in the 4.21 cycle
Along with the headline feature of 5 new drivers, we have the
substantial addition of auxilliary sensor support on the lsm6sdx
parts for ST. There has also been a good set of staging cleanup
in this period with more underway.
An ever increasing number of devices supported with just a new
ID which is a good sign that at least some manufacturers are
continuing to stabilise their interfaces.
New device support,
* ad7124
- New driver supporting Analog Devices' ad7124-4 and ad7124-8 parts
with the inevitable DT binding.
* ad7949
- New driver supporting Analog Devices' ad7949, AD7682 and AD7689 ADCs.
* rm3100
- New driver supporting PNIs RM3100 magnometer with bindings and
vendor prefix.
* ti-dac7311
- New driver supporting DAC7311, DAC6311 and DAC5311 TI DACs, with
DT bindings.
* vcnl5035
- New driver supporting the light sensor part of the VCNL4035, with
DT bindings
Features,
* bindings
- Add a generic ADC channel binding as we keep reinventing this
wheel.
* adc128s052
- Add IDs for additional pin compatible parts.
- Add APCI ID seen on E3940 UP squared boards.
* ad_sigma_delta
- Allow for custom data register overiding default.
* kxcjk1013
- Add KIOX0009 ACPI ID as seen on the Acer One 10.
* lsm6dsx
- Rework leading to...
- External sensor support using the built in I2C master.
- Initial support for a slave lis2mdl magnetometer.
* meson-saradc
- Add temperature sensor support and bindings.
* st_magn
- New ID for lsm9dsl_magn with bindings
- New ID for lis3de accelerometer
* tpl0102
- Add supprot for IIO_AVAIL_RANGE to report the range available
from this device to userspace and in kernel users.
Cleanups and minor fixes
* tools
- Allow outside specification of CFLAGS
* ad2s90
- Handle and spi_read error.
- Handle spi_setup failure
- Drop a pointless assignment.
- Prevent a potentail race by moving device registration to after
all other setup.
- Add missing scale attribute.
- Add a sanity check on channel type before trying to read it.
* ad2s1210
- Move to modern gpio descriptors.
- Drop a gpioin flag which made no sense as far as we can tell.
- Add dt table (bindings doc to follow when this is ready for
moving out of staging).
* ad5933
- Drop camel-case naming of ext_clk_hz.
- White space fixes.
* ad7150
- Local variable to shorten overly long line.
- Alignment and line break fixes.
* ad7280a
- Handle an error path that was previously ignored.
- Use crc8.h to build the crc table replacing custom code.
- Avoid unecessary cast.
- Power down the device if an error happens in probe
- Use devm routines to simplify probe and remove.
* ad7606
- Alignment fixes.
* ad7780
- This worked as long as by coincidence an uninitialized value
was 0. Lets not rely on that.
- Ensure gain update is only used with the ad778x chips that
actually support it.
- Tidy up pattern mask generation.
- Read regulator when scale is requested (which should be infrequent)
as it might have changed from initialization.
* ad7816
- Move to modern gpio descriptors
- Don't use a busy_pin for ad7818 as there isn't one.
- Ensure RD/WR and CONVST pins are outputs (previously they
were brought up as inputs which doesn't seem to make any sense)
- DT id table.
* adc128s052
- SPDX
* adt7316
- Alignment fix.
- Fix data reading. When using I2C the driver never actually
used the value read. This has been broken a very long time
hence no rush to fix it now + the driver is undergoing a lot
of cleanup.
- Sanity check that the i2c read didn't fail to actually read
anything.
* dpot-dac
- Mark a switch full through with slightly different text so that
gcc doesn't warn on it.
* gyro-adc
- Fix a wrong file in the MAINTAINERS entry and add binding doc to the
listed files.
* ina2xx
- Add some early returns to clarify error paths in switch.
* lsm6dsx
- MAINTAINERS entry.
* max11100
- SPDX
* max9611
- SPDX
* mcp4131
- use of_device_get_match_data in preference to spi_get_device_id
approach.
* rcar-adc
- SPDX
* sc27xx
- Add ADC conversion timeout support to avoid possible fault.
* ssp_sensors
- Don't free managed resources manually.
* st-magn
- Add a comment to avoid future confusion over when to use -magn
postfix (on multi chip in package parts)
- Add BDU register for LIS3MDL where it seems to have been missed.
* st-sensors
- Minor spelling, grammar etc fixes.
* tpl0102
- Use a pointer rather than an index of an array to improve conciseness.
* tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (80 commits)
Staging: iio: adt7316: Add an extra check for 'ret' equals to 0
Staging: iio: adt7316: Fix i2c data reading, set the data field
dt-bindings: iio: adc: Add docs for ad7124
iio: adc: Add ad7124 support
dt-bindings: iio: adc: Add common ADCs properties to a separate file
iio: ad_sigma_delta: Allow to provide custom data register address
staging: iio: ad7816: Add device tree table.
iio: imu: st_lsm6dsx: add entry in MAINTAINERS file
iio: potentiometer: mcp4131: use of_device_get_match_data()
staging: iio: adc: ad7280a: use devm_* APIs
staging: iio: adc: ad7280a: power down the device on error in probe
dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors
iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller
iio: imu: st_lsm6dsx: add st_lsm6dsx_push_tagged_data routine
iio: imu: st_lsm6dsx: add i2c embedded controller support
iio: imu: st_lsm6dsx: introduce st_lsm6dsx_sensor_set_enable routine
iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids
iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark
iio: imu: st_lsm6dsx: reload trimming parameter at bootstrap
iio: imu: st_lsm6dsx: introduce locked read/write utility routines
...
The weak functions, strcmp_cpuid_str() and get_cpuid_str(), are defined
in pmu.c.
Most of the cpuid related functions, including *_cpuid_str()'s
declaration and platform specific definition, are in header.c/h.
To make the declaration and definition of all cpuid related functions in
a consistent place, move the weak functions to header.c.
There is no functional change.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Link: http://lkml.kernel.org/r/20181121164939.13482-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf can take minutes to parse an image when -ffunction-section is used.
This is especially true with the kernel image when it is compiled this
way, which is the arm64 default since the patcheset "Enable deadcode
elimination at link time".
Perf organize maps using a rbtree. Whenever perf finds a new symbols, it
first searches this rbtree for the map it belongs to, by strcmp()'aring
section names. When it finds the map with the right name, it uses it to
add the symbol. With a usual image there aren't so many maps but when
using -ffunction-section there's basically one map per function. With
the kernel image that's north of 40,000 maps. For most symbols perf has
to parses the entire rbtree to eventually create a new map and add it.
Consequently perf spends most of the time browsing a rbtree that keeps
getting larger.
This performance fix introduces a secondary rbtree that indexes maps
based on the section name.
Signed-off-by: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Reviewed-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: David Aldridge <david.aldridge@oracle.com>
Reviewed-by: Rob Gardner <rob.gardner@oracle.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1542822679-25591-1-git-send-email-eric.saint.etienne@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Compiled Method Load Record (cmlr) is JDK specific interface to
access JVM stack info. This makes the jvmti agent code not compile under
another jdk, which does not support that.
Separating jvmti cmlr check into special feature check, and adding
HAVE_JVMTI_CMLR macro to indicate that.
Mark cmlr code in jvmti/libjvmti.c with HAVE_JVMTI_CMLR, so we can
compile it on system without cmlr support.
This change makes the jvmti compile with java-1.8.0-ibm package. It's
without the line numbers support, but the rest works.
Adding NO_JVMTI_CMLR compile variable for testing.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Gustavo Luiz Duarte <gduarte@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20181121154341.21521-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf tools cannot find the proper event list for the Cascadelake
server. Because the Cascadelake server and the Skylake server have the
same CPU model number, which are used by the perf tools to find the
event list.
The stepping for Skylake server is up to 4.
The stepping for Cascadelake server starts from 5.
The stepping can be used to distinguish between them.
The stepping is added in get_cpuid_str().
The stepping information for Skylake server is updated in mapfile.csv.
A x86 specific strcmp_cpuid_cmp() function is added to handle two CPUID
formats in mapfile.csv, "vendor-family-model-stepping" and
"vendor-family-model":
- If a cpuid-regular-expression from the mapfile.csv using the new
stepping format, a cpuid-string generated on the machine must include
stepping. Otherwise, it is a mismatch.
- If the cpuid-regular-expression using the old non-stepping format,
the stepping in the cpuid-string will be ignored.
The script, using environment string "PERF_CPUID" without stepping on
Skylake server, will be broken. If so, users must fix their scripts.
Committer notes:
Fixed this build error on centos:6 and debian:7:
arch/x86/util/header.c: In function 'is_full_cpuid':
arch/x86/util/header.c:82:39: error: declaration of 'cpuid' shadows a global declaration [-Werror=shadow]
arch/x86/util/header.c:12:1: error: shadowed declaration is here [-Werror=shadow]
arch/x86/util/header.c: In function 'strcmp_cpuid_str':
arch/x86/util/header.c:98:56: error: declaration of 'cpuid' shadows a global declaration [-Werror=shadow]
arch/x86/util/header.c:12:1: error: shadowed declaration is here [-Werror=shadow]
cc1: all warnings being treated as errors
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181114212416.15665-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Depending on which functions are inlined in util/pmu.c, the snprintf()
calls in perf_pmu__parse_{scale,unit,per_pkg,snapshot}() might trigger a
warning:
util/pmu.c: In function 'pmu_aliases':
util/pmu.c:178:31: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 0 and 4095 [-Werror=format-truncation=]
snprintf(path, PATH_MAX, "%s/%s.unit", dir, name);
^~
I found this when trying to build perf from Linux 3.16 with gcc 8.
However I can reproduce the problem in mainline if I force
__perf_pmu__new_alias() to be inlined.
Suppress this by using scnprintf() as has been done elsewhere in perf.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20181111184524.fux4taownc6ndbx6@decadent.org.uk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This program benchmarks concurrent epoll_wait(2) for file descriptors
that are monitored with with EPOLLIN along various semantics, by a
single epoll instance. Such conditions can be found when using
single/combined or multiple queuing when load balancing.
Each thread has a number of private, nonblocking file descriptors,
referred to as fdmap. A writer thread will constantly be writing to the
fdmaps of all threads, minimizing each threads's chances of epoll_wait
not finding any ready read events and blocking as this is not what we
want to stress. Full details in the start of the C file.
Committer testing:
# perf bench
Usage:
perf bench [<common options>] <collection> <benchmark> [<options>]
# List of all available benchmark collections:
sched: Scheduler and IPC benchmarks
mem: Memory access benchmarks
numa: NUMA scheduling and MM benchmarks
futex: Futex stressing benchmarks
epoll: Epoll stressing benchmarks
all: All benchmarks
# perf bench epoll
# List of available benchmarks for collection 'epoll':
wait: Benchmark epoll concurrent epoll_waits
all: Run all futex benchmarks
# perf bench epoll wait
# Running 'epoll/wait' benchmark:
Run summary [PID 19295]: 3 threads monitoring on 64 file-descriptors for 8 secs.
[thread 0] fdmap: 0xdaa650 ... 0xdaa74c [ 328241 ops/sec ]
[thread 1] fdmap: 0xdaa900 ... 0xdaa9fc [ 351695 ops/sec ]
[thread 2] fdmap: 0xdaabb0 ... 0xdaacac [ 381423 ops/sec ]
Averaged 353786 operations/sec (+- 4.35%), total secs = 8
#
Committer notes:
Fix the build on debian:experimental-x-mips, debian:experimental-x-mipsel
and others:
CC /tmp/build/perf/bench/epoll-wait.o
bench/epoll-wait.c: In function 'writerfn':
bench/epoll-wait.c:399:12: error: format '%ld' expects argument of type 'long int', but argument 2 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
printinfo("exiting writer-thread (total full-loops: %ld)\n", iter);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~
bench/epoll-wait.c:86:31: note: in definition of macro 'printinfo'
do { if (__verbose) { printf(fmt, ## arg); fflush(stdout); } } while (0)
^~~
cc1: all warnings being treated as errors
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com> <jbaron@akamai.com>
Link: http://lkml.kernel.org/r/20181106152226.20883-2-dave@stgolabs.net
Link: http://lkml.kernel.org/r/20181106182349.thdkpvshkna5vd7o@linux-r8p5>
[ Applied above fixup as per Davidlohr's request ]
[ Use inttypes.h to print rlim_t fields, fixing the build on Alpine Linux / musl libc ]
[ Check if eventfd() is available, i.e. if HAVE_EVENTFD is defined ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A new 'perf bench epoll' will use this, and to disable it for older
systems, add a feature test for this API.
This is just a simple program that if successfully compiled, means that
the feature is present, at least at the library level, in a build that
sets the output directory to /tmp/build/perf (using O=/tmp/build/perf),
we end up with:
$ ls -la /tmp/build/perf/feature/test-eventfd*
-rwxrwxr-x. 1 acme acme 8176 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.bin
-rw-rw-r--. 1 acme acme 588 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.d
-rw-rw-r--. 1 acme acme 0 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.make.output
$ ldd /tmp/build/perf/feature/test-eventfd.bin
linux-vdso.so.1 (0x00007fff3bf3f000)
libc.so.6 => /lib64/libc.so.6 (0x00007fa984061000)
/lib64/ld-linux-x86-64.so.2 (0x00007fa984417000)
$ grep eventfd -A 2 -B 2 /tmp/build/perf/FEATURE-DUMP
feature-dwarf=1
feature-dwarf_getlocations=1
feature-eventfd=1
feature-fortify-source=1
feature-sync-compare-and-swap=1
$
The main thing here is that in the end we'll have -DHAVE_EVENTFD in
CFLAGS, and then the 'perf bench' entry needing that API can be
selectively pruned.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-wkeldwob7dpx6jvtuzl8164k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test which checks that the VxLAN driver can learn FDB entries and
that these entries are correctly deleted and aged-out.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test currently expects that a configuration which includes a VxLAN
device with learning enabled to fail.
Previous patches enabled VxLAN learning in mlxsw, so change the test
accordingly.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a possible null pointer dereference in
do_load, detected by the semantic patch deref_null.cocci,
with the following warning:
./tools/bpf/bpftool/prog.c:1021:23-25: ERROR: map_replace is NULL but dereferenced.
The following code has potential null pointer references:
881 map_replace = reallocarray(map_replace, old_map_fds + 1,
882 sizeof(*map_replace));
883 if (!map_replace) {
884 p_err("mem alloc failed");
885 goto err_free_reuse_maps;
886 }
...
1019 err_free_reuse_maps:
1020 for (i = 0; i < old_map_fds; i++)
1021 close(map_replace[i].fd);
1022 free(map_replace);
Fixes: 3ff5a4dc5d ("tools: bpftool: allow reuse of maps with bpftool prog load")
Co-developed-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
adding test/example of bpf_map__set_inner_map_fd usage
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
idea is pretty simple. for specified map (pointed by struct bpf_map)
we would provide descriptor of already loaded map, which is going to be
used as a prototype for inner map. proposed workflow:
1) open bpf's object (bpf_object__open)
2) create bpf's map which is going to be used as a prototype
3) find (by name) map-in-map which you want to load and update w/
descriptor of inner map w/ a new helper from this patch
4) load bpf program w/ bpf_object__load
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use recently added capability check.
See commit 23499442c3 ("bpf: libbpf: retry map creation without
the name") for rationale.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Instead, check for a newly created caps.name bpf_object capability.
If kernel doesn't support names, don't specify the attribute.
See commit 23499442c3 ("bpf: libbpf: retry map creation without
the name") for rationale.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
