The progs for bpf selftests use several different notations to force
function inlining. Standardize to what most of them use,
static __always_inline.
Suggested-by: Song Liu <liu.song.a23@gmail.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The Intel(R) Speed select technologies contains four features.
Performance profile:An non architectural mechanism that allows multiple
optimized performance profiles per system via static and/or dynamic
adjustment of core count, workload, Tjmax, and TDP, etc. aka ISS
in the documentation.
Base Frequency: Enables users to increase guaranteed base frequency on
certain cores (high priority cores) in exchange for lower base frequency
on remaining cores (low priority cores). aka PBF in the documenation.
Turbo frequency: Enables the ability to set different turbo ratio limits
to cores based on priority. aka FACT in the documentation.
Core power: An Interface that allows user to define per core/tile
priority.
There is a multi level help for commands and options. This can be used
to check required arguments for each feature and commands for the
feature.
To start navigating the features start with
$sudo intel-speed-select --help
For help on a specific feature for example
$sudo intel-speed-select perf-profile --help
To get help for a command for a feature for example
$sudo intel-speed-select perf-profile get-lock-status --help
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Len Brown <len.brown@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Based on the following report from Smatch, fix the potential NULL
pointer dereference check:
tools/lib/bpf/libbpf.c:3493
bpf_prog_load_xattr() warn: variable dereferenced before check 'attr'
(see line 3483)
3479 int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr,
3480 struct bpf_object **pobj, int *prog_fd)
3481 {
3482 struct bpf_object_open_attr open_attr = {
3483 .file = attr->file,
3484 .prog_type = attr->prog_type,
^^^^^^
3485 };
At the head of function, it directly access 'attr' without checking
if it's NULL pointer. This patch moves the values assignment after
validating 'attr' and 'attr->file'.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
GCC8 started emitting warning about using strncpy with number of bytes
exactly equal destination size, which is generally unsafe, as can lead
to non-zero terminated string being copied. Use IFNAMSIZ - 1 as number
of bytes to ensure name is always zero-terminated.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There are currently no tests for ALU64 shift operations when the shift
amount is 0. This adds 6 new tests to make sure they are equivalent
to a no-op. The x32 JIT had such bugs that could have been caught by
these tests.
Cc: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
syzbot reported following spat:
BUG: KASAN: use-after-free in __write_once_size include/linux/compiler.h:221
BUG: KASAN: use-after-free in hlist_del_rcu include/linux/rculist.h:455
BUG: KASAN: use-after-free in xfrm_hash_rebuild+0xa0d/0x1000 net/xfrm/xfrm_policy.c:1318
Write of size 8 at addr ffff888095e79c00 by task kworker/1:3/8066
Workqueue: events xfrm_hash_rebuild
Call Trace:
__write_once_size include/linux/compiler.h:221 [inline]
hlist_del_rcu include/linux/rculist.h:455 [inline]
xfrm_hash_rebuild+0xa0d/0x1000 net/xfrm/xfrm_policy.c:1318
process_one_work+0x814/0x1130 kernel/workqueue.c:2269
Allocated by task 8064:
__kmalloc+0x23c/0x310 mm/slab.c:3669
kzalloc include/linux/slab.h:742 [inline]
xfrm_hash_alloc+0x38/0xe0 net/xfrm/xfrm_hash.c:21
xfrm_policy_init net/xfrm/xfrm_policy.c:4036 [inline]
xfrm_net_init+0x269/0xd60 net/xfrm/xfrm_policy.c:4120
ops_init+0x336/0x420 net/core/net_namespace.c:130
setup_net+0x212/0x690 net/core/net_namespace.c:316
The faulting address is the address of the old chain head,
free'd by xfrm_hash_resize().
In xfrm_hash_rehash(), chain heads get re-initialized without
any hlist_del_rcu:
for (i = hmask; i >= 0; i--)
INIT_HLIST_HEAD(odst + i);
Then, hlist_del_rcu() gets called on the about to-be-reinserted policy
when iterating the per-net list of policies.
hlist_del_rcu() will then make chain->first be nonzero again:
static inline void __hlist_del(struct hlist_node *n)
{
struct hlist_node *next = n->next; // address of next element in list
struct hlist_node **pprev = n->pprev;// location of previous elem, this
// can point at chain->first
WRITE_ONCE(*pprev, next); // chain->first points to next elem
if (next)
next->pprev = pprev;
Then, when we walk chainlist to find insertion point, we may find a
non-empty list even though we're supposedly reinserting the first
policy to an empty chain.
To fix this first unlink all exact and inexact policies instead of
zeroing the list heads.
Add the commands equivalent to the syzbot reproducer to xfrm_policy.sh,
without fix KASAN catches the corruption as it happens, SLUB poisoning
detects it a bit later.
Reported-by: syzbot+0165480d4ef07360eeda@syzkaller.appspotmail.com
Fixes: 1548bc4e05 ("xfrm: policy: delete inexact policies from inexact list on hash rebuild")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
"git diff" says:
\ No newline at end of file
after modifying the file.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[mpe: Rebase since addition of another test]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 'perf kvm' command set up things so that we can record, report, top,
etc, but not 'script', so make 'perf script' be able to process samples
by allowing to pass guest kallsyms, vmlinux, modules, etc, and if at
least one of those is provided, set perf_guest to true so that guest
samples get properly resolved.
Testing it:
# perf kvm --guest --guestkallsyms /wb/rhel6.kallsyms --guestmodules /wb/rhel6.modules record -e cycles:Gk
^C[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 3.602 MB perf.data.guest (10492 samples) ]
#
# perf evlist -i perf.data.guest
cycles:Gk
# perf evlist -v -i perf.data.guest
cycles:Gk: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, exclude_user: 1, exclude_hv: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_host: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
#
# perf kvm --guestkallsyms /wb/rhel6.kallsyms --guestmodules /wb/rhel6.modules report --stdio -s sym | head -30
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 10K of event 'cycles:Gk'
# Event count (approx.): 2434201408
#
# Overhead Symbol
# ........ ..............................................
#
11.93% [g] avtab_search_node
3.95% [g] sidtab_context_to_sid
2.41% [g] n_tty_write
2.20% [g] _spin_unlock_irqrestore
1.37% [g] _aesni_dec4
1.33% [g] kmem_cache_alloc
1.07% [g] native_write_cr0
0.99% [g] kfree
0.95% [g] _spin_lock
0.91% [g] __memset
0.87% [g] schedule
0.83% [g] _spin_lock_irqsave
0.76% [g] __kmalloc
0.67% [g] avc_has_perm_noaudit
0.66% [g] kmem_cache_free
0.65% [g] glue_xts_crypt_128bit
0.59% [g] __d_lookup
0.59% [g] __audit_syscall_exit
0.56% [g] __memcpy
#
Then, when trying to use perf script to generate a python script and
then process the events after adding a python hook for non-tracepoint
events:
# perf script -i perf.data.guest -g python
generated Python script: perf-script.py
# vim perf-script.py
# tail -2 perf-script.py
def process_event(param_dict):
print(param_dict["symbol"])
#
# perf script -i perf.data.guest -s perf-script.py | head
in trace_begin
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
vmx_vmexit
231
#
We'd see just the vmx_vmexit, i.e. the samples from the guest don't show
up.
After this patch:
# perf script --guestkallsyms /wb/rhel6.kallsyms --guestmodules /wb/rhel6.modules -i perf.data.guest -s perf-script.py 2> /dev/null | head -30
in trace_begin
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
save_args
do_timer
drain_array
inode_permission
avc_has_perm_noaudit
run_timer_softirq
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
apic_timer_interrupt
kvm_guest_apic_eoi_write
run_posix_cpu_timers
_spin_lock
handle_pte_fault
rcu_irq_enter
delay_tsc
delay_tsc
native_read_tsc
apic_timer_interrupt
sys_open
internal_add_timer
list_del
rcu_exit_nohz
#
Jiri Olsa noticed we need to set 'perf_guest' to true if we want to
process guest samples and I made it be set if one of the guest files
settings get set via the command line options added in this patch, that
match those present in the 'perf kvm' command.
We probably want to have 'perf record', 'perf report' etc to notice that
there are guest samples and do the right thing, which is to look for
files with some suffix that make it be associated with the guest used to
collect the samples, i.e. if a vmlinux file is passed, we can get the
build-id from it, if not some other identifier or simply looking for
"kallsyms.guest", for instance, in the current directory.
Reported-by: Mariano Pache <npache@redhat.com>
Tested-by: Mariano Pache <npache@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Ali Raza <alirazabhutta.10@gmail.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Mario <jmario@redhat.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Orran Krieger <okrieger@redhat.com>
Cc: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Yunlong Song <yunlong.song@huawei.com>
Link: https://lkml.kernel.org/n/tip-d54gj64rerlxcqsrod05biwn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The psock_tpacket test will need to access /proc/kallsyms, this would
require the kernel config CONFIG_KALLSYMS to be enabled first.
Apart from adding CONFIG_KALLSYMS to the net/config file here, check the
file existence to determine if we can run this test will be helpful to
avoid a false-positive test result when testing it directly with the
following commad against a kernel that have CONFIG_KALLSYMS disabled:
make -C tools/testing/selftests TARGETS=net run_tests
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Memory_BW metric generates groups including duration_time, which
maps to a software event.
For some reason this makes the group always not count.
Always put duration_time outside a group when generating metrics. It's
always the same time, so no need to group it.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190628220737.13259-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Provide an internal refcounting logic if no ->ref field is provided
in the pagemap passed into devm_memremap_pages so that callers don't
have to reinvent it poorly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The dev_pagemap is a growing too many callbacks. Move them into a
separate ops structure so that they are not duplicated for multiple
instances, and an attacker can't easily overwrite them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently KVM_STATE_NESTED_EVMCS is used to signal that eVMCS
capability is enabled on vCPU.
As indicated by vmx->nested.enlightened_vmcs_enabled.
This is quite bizarre as userspace VMM should make sure to expose
same vCPU with same CPUID values in both source and destination.
In case vCPU is exposed with eVMCS support on CPUID, it is also
expected to enable KVM_CAP_HYPERV_ENLIGHTENED_VMCS capability.
Therefore, KVM_STATE_NESTED_EVMCS is redundant.
KVM_STATE_NESTED_EVMCS is currently used on restore path
(vmx_set_nested_state()) only to enable eVMCS capability in KVM
and to signal need_vmcs12_sync such that on next VMEntry to guest
nested_sync_from_vmcs12() will be called to sync vmcs12 content
into eVMCS in guest memory.
However, because restore nested-state is rare enough, we could
have just modified vmx_set_nested_state() to always signal
need_vmcs12_sync.
From all the above, it seems that we could have just removed
the usage of KVM_STATE_NESTED_EVMCS. However, in order to preserve
backwards migration compatibility, we cannot do that.
(vmx_get_nested_state() needs to signal flag when migrating from
new kernel to old kernel).
Returning KVM_STATE_NESTED_EVMCS when just vCPU have eVMCS enabled
have a bad side-effect of userspace VMM having to send nested-state
from source to destination as part of migration stream. Even if
guest have never used eVMCS as it doesn't even run a nested
hypervisor workload. This requires destination userspace VMM and
KVM to support setting nested-state. Which make it more difficult
to migrate from new host to older host.
To avoid this, change KVM_STATE_NESTED_EVMCS to signal eVMCS is
not only enabled but also active. i.e. Guest have made some
eVMCS active via an enlightened VMEntry. i.e. vmcs12 is copied
from eVMCS and therefore should be restored into eVMCS resident
in memory (by copy_vmcs12_to_enlightened()).
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The target is to compare the performance difference (cycles diff) for
the same basic blocks in different data files.
The same basic block means same function, same start address and same
end address. This patch finds the same basic blocks from different data
files and link them together and resort by the cycles diff.
v3:
---
The block stuffs are maintained by new structure 'block_hist',
so this patch is update accordingly.
v2:
---
Since now the basic block hists is changed to per symbol,
the patch only links the basic block hists for the same
symbol in different data files.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1561713784-30533-6-git-send-email-yao.jin@linux.intel.com
[ sym->name is an array, not a pointer, so no need to check it for NULL, fixes de build in some distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hist__account_cycles() can account cycles per basic block. The basic
block information is saved in cycles_hist structure.
This patch processes each symbol, get basic blocks from cycles_hist and
add the basic block entries to a new hists (in 'struct block_hist').
Using a hists is because we need to compare, sort and print the basic
blocks later.
v6:
---
Since 'ops' argument is removed from hists__add_entry_block,
update the code accordingly. No functional change.
v5:
---
Since now we still carry block_info in 'struct hist_entry'
we don't need to use our own new/free ops for hist entries.
And the block_info is released in hist_entry__delete.
v3:
---
1. In v2, we put block stuffs in 'struct hist_entry', but
it's not a good design. In v3, we create a new
'struct block_hist' and cast the 'struct hist_entry' to
'struct block_hist' in some places, which can avoid adding
new stuffs in 'struct hist_entry'.
2. abs() -> labs(), in block_cycles_diff_cmp().
v2:
---
v1 adds the basic block entries to per data-file hists
but v2 adds the basic block entries to per symbol hists.
That is to keep current perf-diff format. Will show the
result in next patches.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1561713784-30533-5-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since this is not really a device with all capabilities, this test
ensures that it has *enough* to make it through the data path
without causing unwanted side-effects (read crash!).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The metric group code tries to find a group it added earlier in the
evlist. Fix the lookup to handle groups with partially overlaps
correctly. When a sub string match fails and we reset the match, we have
to compare the first element again.
I also renamed the find_evsel function to find_evsel_group to make its
purpose clearer.
With the earlier changes this fixes:
Before:
% perf stat -M UPI,IPC sleep 1
...
1,032,922 uops_retired.retire_slots # 1.1 UPI
1,896,096 inst_retired.any
1,896,096 inst_retired.any
1,177,254 cpu_clk_unhalted.thread
After:
% perf stat -M UPI,IPC sleep 1
...
1,013,193 uops_retired.retire_slots # 1.1 UPI
932,033 inst_retired.any
932,033 inst_retired.any # 0.9 IPC
1,091,245 cpu_clk_unhalted.thread
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Fixes: b18f3e3650 ("perf stat: Support JSON metrics in perf stat")
Link: http://lkml.kernel.org/r/20190624193711.35241-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Event merging is mainly to collapse similar events in lots of different
duplicated PMUs.
It can break metric displaying. It's possible for two metrics to have
the same event, and when the two events happen in a row the second
wouldn't be displayed. This would also not show the second metric.
To avoid this don't merge events in the same PMU. This makes sense, if
we have multiple events in the same PMU there is likely some reason for
it (e.g. using multiple groups) and we better not merge them.
While in theory it would be possible to construct metrics that have
events with the same name in different PMU no current metrics have this
problem.
This is the fix for perf stat -M UPI,IPC (needs also another bug fix to
completely work)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Fixes: 430daf2dc7 ("perf stat: Collapse identically named events")
Link: http://lkml.kernel.org/r/20190624193711.35241-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After setting up metric groups through the event parser, the metricgroup
code looks them up again in the event list.
Make sure we only look up events that haven't been used by some other
metric. The data structures currently cannot handle more than one metric
per event. This avoids problems with multiple events partially
overlapping.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: http://lkml.kernel.org/r/20190624193711.35241-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This came from the kernel lib/argv_split.c, so move it to
tools/lib/argv_split.c, to get it closer to the kernel structure.
We need to audit the usage of argv_split() to figure out if it is really
necessary to do have one allocation per argv[] entry, looking at one of
its users I guess that is not the case and we probably are even leaking
those allocations by not using argv_free() judiciously, for later.
With this we further remove stuff from tools/perf/util/, reducing the
perf specific codebase and encouraging other tools/ code to use these
routines so as to keep the style and constructs used with the kernel.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-j479s1ive9h75w5lfg16jroz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jonathan writes:
Second set of IIO device support, features, cleanups and minor fixes for 5.3.
A few bits for the counters subsystem mixed in here as well.
There are some late breaking fixes as well, which aren't so urgent
they can't wait for the merge window.
New Device Support
* adf4371
- New driver + bindings.
- Support the adf4372 PLL. Mostly ID and bindings.
* ad8366 (note includes rework of driver needed to allow support for these).
- Support the ADL5240 variable gain amplifier (VGA).
- Support the ADA4961 digital gain amplifier (DGA).
* dps310
- New driver, in several parts from different authors for this temp
and pressure sensor.
- Includes errata workaround for a temperature reading issue.
* stk3310
- Support the stk3335, mostly ID.
Features and cleanups
* core
- drop error handling on debugfs registration.
- harden by making sure we don't overrun iio_chan_info_postfix.
* docs
- convert remaining docs to rst. At somepoint we'll fit these few
into the main IIO docs.
- improve sampling_frequency_available docs but explaining the
range form.
* ad_sigma_delta
- Drop a pointless goto.
* ad2s1210
- Drop pointless platform data null check seeing as we don't actually
use platform data anymore.
* ad7124
- Relax limitation on channel numbers to allow pseudo different channels.
- Support control of whether the input is buffered via DT.
- Use dynamic allocation for channel configuration to make it easier
to support new devices.
- YAML binding conversion.
* ad7150
- Comment tidy up.
- Consistent and simple if (ret) handling of i2c errors.
- FIELD_GET and GENMASK.
- Ternary rather than !!(condition) for readability.
- Use macros to avoid repetition of channel definitions.
* ad7606
- Add software channel config (rather that pin controlled)
- Refactor to simplify addition of new part in future.
* ad7746
- of_deivce_id table.
* ad7780
- MAINTAINERS entry
- YAML DT bindings.
* ad8366
- Stop using core mlock in favour of well scoped local lock.
- SPDX + copyright date update.
* ad9834
- of_device_id table
* adf4371
- Add support for output stage muting before lock on has occured.
* adis library
- MAINTAINERS entry to reflect that this now Alexandru's problem ;)
* adis162xx:
- Fix a slightly incorrect set of comments and print statements on
minimum supported voltage.
* adis16203
- of_device_id table.
* adis16240
- Add of_device_id table (in two parts as first patch only used it for
MODULE_DEVICE_TABLE.)
* adt7316-spi
- of_device_id table
* adxl372
- YAML DT binding conversion.
- Cleanup use of buffer callback functions (precursor to core rework).
* bh1710
- Simplify getting the i2c adapter from the client.
* dht11
- Mote to newer GPIO consumer interface.
* kxcjk-1013.c
- Add binding for sensor in display of some ultrabooks after userspace
tools updated for it not be a problem to report two similar sensors.
* imx7d
- drop unused variables.
- white space
- define instead of variable for clock frequency that is fixed.
- drop pointless error message.
* messon_saradc
- SPDX
* sps30
- MAINTAINERS entry
- YAML binding conversion.
* st_accel
- Tidy up ordering in various buffer related callbacks. This is
part of a long running effort to simplify the core code.
* stm32-dfsdm:
- Manage the resolution cleanly in triggerd modes.
- Add fast mode support which allows more flexible filter choices.
- Add a comment on the reason for a 16 bit record when technically
not 'required'.
* st_lsm6dsx
- Embed device name in the sensor_settings struct as i3c doesn't
have a convenient name field to use for this.
* xilinx-adc
- Relax constraints on supported platforms to reflect that this
can used with FPGAs on PCIe cards and hence many architectures.
* counters/ftm-quaddec
- Fix some formatting io MODULE_AUTHOR
- MAINTAINERS entry
Fixes
* tools
- fix incorrect handling of 32 bit channels.
* sca3000
- Potential endian bug that is unlikely to bite anyone (be64 host
seems unlikely for this old part).
* stm32-adc
- Add vdda-supply. On some boards it needs to be turned on to supply
the ADC. DT bindings included.
* stm32-dfsdm
- Fix output resolution to work with filter orders other than 3.
- Fix output datatype as it's signed and previously claimed not to be.
* tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (68 commits)
iio: iio-utils: Fix possible incorrect mask calculation
iio: frequency: adf4371: Add support for output stage mute
dt-bindings: iio: frequency: Add ADF4372 PLL documentation
iio: frequency: adf4371: Add support for ADF4372 PLL
dt-bindings: iio: adc: Add buffered input property
Convert AD7124 bindings documentation to YAML format.
iio: adc: ad7124: Shift to dynamic allocation for channel configuration
iio: adc: ad7124: Add buffered input support
iio: adc: ad7124: Remove input number limitation
MAINTAINERS: add ADIS IMU driver library entry
iio: adis162xx: fix low-power docs & reports
counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR
iio: core: no need to check return value of debugfs_create functions
docs: iio: convert to ReST
iio: adc: stm32-adc: add missing vdda-supply
dt-bindings: iio: adc: stm32: add missing vdda supply
iio: adc: stm32-dfsdm: add comment for 16 bits record
iio: adc: stm32-dfsdm: add fast mode support
iio: adc: stm32-dfsdm: manage data resolution in trigger mode
iio: adc: stm32-dfsdm: fix data type
...
The guard macro __PPC_ASM_H in the header ppc_asm.h
doesn't match the #ifndef macro _PPC_ASM_H. The patch
makes them the same.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Merge our fixes branch into next, this brings in a number of commits
that fix bugs we don't want to hit in next, in particular the fix for
CVE-2019-12817.
running the script on systems without netdevsim now prints:
SKIP: ipsec_offload can't load netdevsim
instead of error message & failed status.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
