ASoC: More updates for v5.5
Some more development work for v5.5. Highlights include:
- More cleanups from Morimoto-san.
- Trigger word detection for RT5677.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 957ce0c6b8 (ASoC: soc-pcm: check symmetry after
hw_params).
That commit cause soc_pcm_params_symmetry can't take effect.
cpu_dai->rate, cpu_dai->channels and cpu_dai->sample_bits
are updated in the middle of soc_pcm_hw_params, so move
soc_pcm_params_symmetry to the end of soc_pcm_hw_params is
not a good solution, for judgement of symmetry in the function
is always true.
FIXME:
According to the comments of that commit, I think the case
described in the commit should disable symmetric_rates
in Back-End, rather than changing the position of
soc_pcm_params_symmetry.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1573555602-5403-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-topology adds extra dai_link by using snd_soc_add_dai_link(),
and removes it by snd_soc_romove_dai_link().
This snd_soc_add/remove_dai_link() and/or its related
functions are unbalanced before, and now, these are balance-uped.
But, it finds the random operation issue, and it is reported by
Pierre-Louis.
When card was released, topology will call snd_soc_remove_dai_link()
via (A).
static void soc_cleanup_card_resources(struct snd_soc_card *card)
{
struct snd_soc_dai_link *link, *_link;
/* This should be called before snd_card_free() */
(A) soc_remove_link_components(card);
/* free the ALSA card at first; this syncs with pending operations */
if (card->snd_card) {
(B) snd_card_free(card->snd_card);
card->snd_card = NULL;
}
/* remove and free each DAI */
(X) soc_remove_link_dais(card);
for_each_card_links_safe(card, link, _link)
(C) snd_soc_remove_dai_link(card, link);
...
}
At (A), topology calls snd_soc_remove_dai_link().
Then topology rtd, and its related all data are freed.
Next, (B) is called, and then, pcm->private_free = soc_pcm_private_free()
is called.
static void soc_pcm_private_free(struct snd_pcm *pcm)
{
struct snd_soc_pcm_runtime *rtd = pcm->private_data;
/* need to sync the delayed work before releasing resources */
flush_delayed_work(&rtd->delayed_work);
snd_soc_pcm_component_free(rtd);
}
Here, it gets rtd via pcm->private_data.
But, topology related rtd are already freed at (A).
Normal sound card has no damage, becase it frees rtd at (C).
These are finalizing rtd related data.
Thus, these should be called when rtd was freed, not sound card
was freed. It is very natural and understandable.
In other words, pcm->private_free = soc_pcm_private_free()
is no longer needed.
Extra issue is that there is zero chance to call
soc_remove_dai() for topology related dai at (X).
Because (A) removes rtd connection from card too, and,
(X) is based on card connected rtd.
This means, (X) need to be called before (C) (= for normal sound)
and (A) (= for topology).
Now, I want to focus this patch which is the reason why
snd_card_free() = (B) is located there.
commit 4efda5f213
("ASoC: Fix use-after-free at card unregistration")
Original snd_card_free() was called last of this function.
But moved to top to avoid use-after-free issue.
The issue was happen at soc_pcm_free() which was pcm->private_free,
today it is updated/renamed to soc_pcm_private_free().
In other words, (B) need to be called before (C) (= for normal sound)
and (A) (= for topology), because it needs (not yet freed) rtd.
But, (A) need to be called before (B),
because it needs card->snd_card pointer.
If we call flush_delayed_work() and snd_soc_pcm_component_free()
(= same as soc_pcm_private_free()) when rtd was freed (= (C), (A)),
there is no reason to call snd_card_free() at top of this function.
It can be called end of this function, again.
But, in such case, it will likely break unbind again, as Takashi-san
reported. When unbind is performed in a busy state, the code may
release still-in-use resources.
At least we need to call snd_card_disconnect_sync() at the first place.
The final code will be...
static void soc_cleanup_card_resources(struct snd_soc_card *card)
{
struct snd_soc_dai_link *link, *_link;
if (card->snd_card)
(Z) snd_card_disconnect_sync(card->snd_card);
(X) soc_remove_link_dais(card);
(A) soc_remove_link_components(card);
for_each_card_links_safe(card, link, _link)
(C) snd_soc_remove_dai_link(card, link);
...
if (card->snd_card) {
(B) snd_card_free(card->snd_card);
card->snd_card = NULL;
}
}
To avoid release still-in-use resources,
call snd_card_disconnect_sync() at (Z).
(X) is needed for both non-topology and topology.
topology removes rtd via (A), and
non topology removes rtd via (C).
snd_card_free() is no longer related to use-after-free issue.
Thus, locating (B) is no problem.
Fixes: df95a16d2a ("ASoC: soc-core: fix RIP warning on card removal")
Fixes: bc7a9091e5 ("ASoC: soc-core: add soc_unbind_dai_link()")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87o8xax88g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tlv320aic31xx devices allow to adjust the output common-mode voltage
for best analog performance. The datasheet states that the common mode
voltage should be set to be <= AVDD/2.
This changes allows to configure the output common-mode voltage via a DT
property. If the property is absent the voltage is automatically chosen
as the highest voltage below/equal to AVDD/2.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20191118151207.28576-1-l.stach@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 130d3e9077 (Fix CFL and CML FW nocodec binary names.) broke the
build in some configurations as it depends on changes in the development
branch, revert it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
In case the RST line is connected to a GPIO line it needs to be pulled high
when the driver probes to be able to use the codec.
Add support also for cases when more than one codec is is controlled by the
same GPIO line by requesting the gpio with GPIOD_FLAGS_BIT_NONEXCLUSIVE.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191113124734.27984-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_cleanup_card_resources() will call card->remove(), but it should be
called if card->probe() or card->late_probe() are called.
snd_soc_bind_card() might be error before calling
card->probe() / card->late_probe().
In that time, card->remove() will be called.
This patch adds card_probed parameter to judge it.
Fixes: bfce78a559 ("ASoC: soc-core: tidyup soc_init_dai_link()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/87o8xg4ltr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
snd_soc_bind_card() is calling snd_soc_dapm_init() for both
card and component.
Let's call paired snd_soc_dapm_shutdown() at paired
soc_cleanup_card_resources().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r22c4lub.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current code assumes that the power is turned off in
SND_SOC_BIAS_OFF. If there are no actual regulator the codec isn't
turned off and the registers are not reset to their default values but
the regcache is still marked as dirty. Thus a value might not be written
to the hardware if it is set to the default value. Do a software reset
before turning off the power to make sure the registers are always reset
to their default states.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191112223629.21867-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_bind_card() is calling many initialize functions
for each card / link / dai / aux etc, etc, etc...
When error happen, the message is indicated at snd_soc_bind_card(),
not at each functions.
But, only soc_probe_aux_devices() case is indicating error at functions,
not at snd_soc_bind_card().
It is not an issue, but unbalanced.
This patch moves error message to snd_soc_bind_card().
Also avoids deep-nested code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfsthkw9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't need to separete snd_soc_add_dai_link() and
soc_bind_dai_link() anymore. Let's merge these.
One note is that before this patch, it adds list (A)
eventhough if it had dai_link->ignore (1), or already bounded dai_link (2).
But I guess it is wrong. This patch also solve this issue.
/* BEFORE */
int soc_bind_dai_link(...)
{
...
(1) if (dai_link->ignore)
return 0;
(2) if (soc_is_dai_link_bound(...))
return 0;
...
}
int snd_soc_add_dai_link(...)
{
...
=> ret = soc_bind_dai_link(...);
=> if (ret < 0)
=> return ret;
(A) list_add_tail(&dai_link->list, &card->dai_link_list);
...
}
/* AFTER */
int snd_soc_add_dai_link(...)
{
...
(1) if (dai_link->ignore)
return 0;
(2) if (soc_is_dai_link_bound(...))
return 0;
...
(A) list_add_tail(&dai_link->list, &card->dai_link_list);
return 0;
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r22lhkx8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
