Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If CONFIG_OF_ALL_DTBS is enabled, "make ARCH=arm64 dtbs" compiles each
DTB twice; one from arch/arm64/boot/dts/*/Makefile and the other from
the dtb-$(CONFIG_OF_ALL_DTBS) line in arch/arm64/boot/dts/Makefile.
It could be a race problem when building DTBS in parallel.
Another minor issue is CONFIG_OF_ALL_DTBS covers only *.dts in vendor
sub-directories, so this broke when Broadcom added one more hierarchy
in arch/arm64/boot/dts/broadcom/<soc>/.
One idea to fix the issues in a clean way is to move DTB handling
to Kbuild core scripts. Makefile.dtbinst already recognizes dtb-y
natively, so it should not hurt to do so.
Add $(dtb-y) to extra-y, and $(dtb-) as well if CONFIG_OF_ALL_DTBS is
enabled. All clutter things in Makefiles go away.
As a bonus clean-up, I also removed dts-dirs. Just use subdir-y
directly to traverse sub-directories.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[robh: corrected BUILTIN_DTB to CONFIG_BUILTIN_DTB]
Signed-off-by: Rob Herring <robh@kernel.org>
We need to add "clean-files" in Makfiles to clean up DT blobs, but we
often miss to do so.
Since there are no source files that end with .dtb or .dtb.S, so we
can clean-up those files from the top-level Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Herring <robh@kernel.org>
It adds the initial zx296718-pcbox board support with devices like
storage, audio and VGA output enabled.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
It enables the I2S sound card support, which is used to drive audio
through aud96p22 codec in case of TV output.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Instead of simple-audio-card, audio-graph-card is recommended for audio
bindings. Let's change to it, so that the HDMI/SPDIF audio card can
align with the new I2S/Codec card which will be added later.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
We will enable PWM device to control voltage through pwm-regulator
support. So let's add voltage data into OPP table.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The default I2S0 parent clock AUDIO_24M can not be divided into required
sample rate in some cases, for example when 48KHz is needed. Change the
parent clock to AUDIO_99M which works for most sample rates.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
It adds VGA device in zx296718.dtsi, so that boards with VGA connector
can enable the support by changing 'status' in board DTS file.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Compiling the DT file with W=1, DTC warns like follows:
Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property
Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
It adds VOU tvenc device in zx296718.dtsi, so that boards with TV
connector can enable the support by changing 'status' in board DTS file.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
It adds VOU DPC device and enables HDMI support, which includes both
display and audio through SPDIF interface.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Add three mmc devices for zx296718 SoC, and enable the SD and eMMMC on
zx296718-evb board.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Rather than a fixed rate clock, pll_vga is a PLL can be programmed into
different freqencies. Let's drop it from device tree and get it
registered from clock driver.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This patch adds the CPU clock phandle in CPU's node
and uses operating-points-v2 to register operating points.
So it can be used by cpufreq-dt driver.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull ARM 64-bit DT updates from Arnd Bergmann:
"A couple of interesting new SoC platforms are now supported, these are
the respective DTS sources:
- Samsung Exynos5433 mobile phone platform, including an (almost)
fully supported phone reference board.
- Hisilicon Hip07 server platform and D05 board, the latest iteration
of their product line, now with 64 Cortex-A72 cores across two
sockets.
- Allwinner A64 SoC, the first 64-bit chip from their "sunxi" product
line, used in Android tablets and ultra-cheap development boards
- NXP LS1046A Communication processor, improving on the earlier
LS1043A with faster CPU cores
- Qualcomm MSM8992 (Snapdragon 808) and MSM8994 (Snapdragon 810)
mobile phone SoCs
- Early support for the Nvidia Tegra Tegra186 SoC
- Amlogic S905D is a minor variant of their existing Android consumer
product line
- Rockchip PX5 automotive platform, a close relative of their popular
rk3368 Android tablet chips
Aside from the respective evaluation platforms for the above chips,
there are only a few consumer devices and boards added this time:
- Huawei Nexus 6P (Angler) mobile phone
- LG Nexus 5x (Bullhead) mobile phone
- Nexbox A1 and A95X Android TV boxes
- Pine64 development board based on Allwinner A64
- Globalscale Marvell ESPRESSOBin community board based on Armada 3700
- Renesas "R-Car Starter Kit Pro" (M3ULCB) low-cost automotive board
For the existing platforms, we get bug fixes and new peripheral
support for Juno, Renesas, Uniphier, Amlogic, Samsung, Broadcom,
Rockchip, Berlin, and ZTE"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (168 commits)
arm64: dts: fix build errors from missing dependencies
ARM64: dts: meson-gxbb: add SCPI pre-1.0 compatible
ARM64: dts: meson-gxl: Add support for Nexbox A95X
ARM64: dts: meson-gxm: Add support for the Nexbox A1
ARM: dts: artpec: add pcie support
arm64: dts: berlin4ct-dmp: add missing unit name to /memory node
arm64: dts: berlin4ct-stb: add missing unit name to /memory node
arm64: dts: berlin4ct: add missing unit name to /soc node
arm64: dts: qcom: msm8916: Add ddr support to sdhc1
arm64: dts: exynos: Enable HS400 mode for eMMC for TM2
ARM: dts: Add xo to sdhc clock node on qcom platforms
ARM64: dts: Add support for Meson GXM
dt-bindings: add rockchip RK1108 Evaluation board
arm64: dts: NS2: Add PCI PHYs
arm64: dts: NS2: enable sdio1
arm64: dts: exynos: Add the mshc_2 node for supporting T-Flash
arm64: tegra: Add NVIDIA P2771 board support
arm64: tegra: Enable PSCI on P3310
arm64: tegra: Add NVIDIA P3310 processor module support
arm64: tegra: Add GPIO controllers on Tegra186
...
The gic-v3 property redistributor-stride is only meant as a workaround
for broken platforms that have a redistributor stride deviating what the
architecture defines, i.e. 128KiB for GICv3, 256KiB for GICv4. This is
not the case for ZX296718, and redistributor-stride is not really
necessary. Let's drop it.
Also, #redistributor-regions is only required when there is more than
one such region is present. Let's remove it as well.
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
GICR for multiple CPU can be described with start address and stride,
or with multiple address. Current multiple address and stride are
both used. Fix it.
vmalloc patch 727a7f5a9 triggered this bug:
[ 0.097146] Unable to handle kernel paging request at virtual address ffff000008060008
[ 0.097150] pgd = ffff000008602000
[ 0.097160] [ffff000008060008] *pgd=000000007fffe003, *pud=000000007fffd003, *pmd=000000007fffc003, *pte=0000000000000000
[ 0.097165] Internal error: Oops: 96000007 [#1] PREEMPT SMP
[ 0.097170] Modules linked in:
[ 0.097177] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0+ #1474
[ 0.097179] Hardware name: ZTE zx296718 evaluation board (DT)
[ 0.097183] task: ffff80003e8c8b80 task.stack: ffff80003e8d0000
[ 0.097197] PC is at gic_populate_rdist+0x74/0x15c
[ 0.097202] LR is at gic_starting_cpu+0xc/0x20
[ 0.097206] pc : [<ffff0000082b1b18>] lr : [<ffff0000082b26e0>] pstate: 600001c5
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add clock controller nodes, including one top controller
two low speed controllers and one audio controller.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add device tree support for ZX296718 SoC and evaluation board based
on it. Also document new values.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
