Currently FAT file-system maps the VFS "superblock" abstraction to the
FSINFO block. The FSINFO block contains non-essential data about the
amount of free clusters and the next free cluster. FAT file-system can
always find out this information by scanning the FAT table, but having it
in the FSINFO block may speed things up sometimes. So FAT file-system
relies on the VFS superblock write-out services to make sure the FSINFO
block is written out to the media from time to time.
The whole "superblock write-out" VFS infrastructure is served by the
'sync_supers()' kernel thread, which wakes up every 5 (by default) seconds
and writes out all dirty superblock using the '->write_super()' call-back.
But the problem with this thread is that it wastes power by waking up the
system every 5 seconds no matter what. So we want to kill it completely
and thus, we need to make file-systems to stop using the '->write_super'
VFS service, and then remove it together with the kernel thread.
This patch switches the FAT FSINFO block management from
'->write_super()'/'->s_dirt' to 'fsinfo_inode'/'->write_inode'. Now,
instead of setting the 's_dirt' flag, we just mark the special
'fsinfo_inode' inode as dirty and let VFS invoke the '->write_inode'
call-back when needed, where we write-out the FSINFO block.
This patch also makes sure we do not mark the 'fsinfo_inode' inode as
dirty if we are not FAT32 (FAT16 and FAT12 do not have the FSINFO block)
or if we are in R/O mode.
As a bonus, we can also remove the '->sync_fs()' and '->write_super()' FAT
call-back function because they become unneeded.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Preparation for further changes. It touches few functions in fatent.c and
prevents them from marking the superblock as dirty unnecessarily often.
Namely, instead of marking it as dirty in the internal tight loops - do it
only once at the end of the functions. And instead of marking it as dirty
while holding the FAT table lock, do it outside the lock.
The reason for this patch is that marking the superblock as dirty will
soon become a little bit heavier operation, so it is cleaner to do this
only when it is necessary.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A preparation patch which introduces a 'mark_fsinfo_dirty()' helper
function which just sets the 's_dirt' flag to 1 so far. I'll add more
code to this helper later, so I do not mark it as 'inline'.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is patchset makes fatfs stop using the VFS '->write_super()' method
for writing out the FSINFO block.
The final goal is to get rid of the 'sync_supers()' kernel thread. This
kernel thread wakes up every 5 seconds (by default) and calls
'->write_super()' for all mounted file-systems. And the bad thing is that
this is done even if all the superblocks are clean. Moreover, some
file-systems do not even need this end they do not register the
'->write_super()' method at all (e.g., btrfs).
So 'sync_supers()' most often just generates useless wake-ups and wastes
power. I am trying to make all file-systems independent of
'->write_super()' and plan to remove 'sync_supers()' and '->write_super'
completely once there are no more users.
The '->write_supers()' method is mostly used by baroque file-systems like
hfs, udf, etc. Modern file-systems like btrfs and xfs do not use it.
This justifies removing this stuff from VFS completely and make every FS
self-manage own superblock.
Tested with xfstests.
This patch:
Preparation for further changes. It introduces a special inode
('fsinfo_inode') in FAT file-system which we'll later use for managing the
FSINFO block. Note, this there is already one special inode ('fat_inode')
which is used for managing the FAT tables.
Introduce new 'MSDOS_FSINFO_INO' constant for this special inode. It is
safe to do because FAT file-system does not store inode numbers on the
media but generates them run-time.
I've also cleaned up the comment to existing 'MSDOS_ROOT_INO' constant,
while on it.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The PRINTK() macro isn't really used. Let's just remove it because it
is ugly and out of date.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are two cases that the cache flush is needed to avoid data loss
against unexpected hang or power failure. One is sync file function (i.e.
nilfs_sync_file) and another is checkpointing ioctl.
This issues a cache flush request to device for such cases if barrier
mount option is enabled, and makes sure data really is on persistent
storage on their completion.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As described in commit 07d106d0a3 ("vfs: fix up ENOIOCTLCMD error
handling"), drivers should return -ENOIOCTLCMD if they receive an ioctl
command which they don't understand. Doing so will result in -ENOTTY
being returned to userspace, which matches the behaviour of the compat
layer if it fails to translate an ioctl command.
This patch fixes the pipe ioctl to return -ENOIOCTLCMD instead of -EINVAL
when passed an unknown ioctl command.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Alan Cox <alan@linux.intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The init/mount.o source files produce a number of sparse warnings of the
type:
warning: incorrect type in argument 1 (different address spaces)
expected char [noderef] <asn:1>*dev_name
got char *name
This is due to the syscalls expecting some of the arguments to be user
pointers but they are being passed as kernel pointers. This is harmless
but adds a lot of noise to a sparse build.
To limit the noise just disable the sparse checking in the relevant source
files, but still display a warning so that the user knows this has been
done.
Since the sparse checking has been disabled we can also remove the __user
__force casts that are scattered thru the source.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggest the shorter pr_<level> instead of printk(KERN_<LEVEL>.
Prefer to use pr_<level> over bare printks.
Prefer to use pr_warn over pr_warning.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Requires --strict option during invocation:
~/linux$ scripts/checkpatch --strict foo.patch
This tests for a bad habits of mine like this:
return 0 ;
Note that it does allow a special case of a bare semicolon
for empty loops:
while (foo())
;
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previous code was using optimizations which were developed to work well
even on narrow-word CPUs (by today's standards). But Linux runs only on
32-bit and wider CPUs. We can use that.
First: using 32x32->64 multiply and trivial 32-bit shift, we can correctly
divide by 10 much larger numbers, and thus we can print groups of 9 digits
instead of groups of 5 digits.
Next: there are two algorithms to print larger numbers. One is generic:
divide by 1000000000 and repeatedly print groups of (up to) 9 digits.
It's conceptually simple, but requires an (unsigned long long) /
1000000000 division.
Second algorithm splits 64-bit unsigned long long into 16-bit chunks,
manipulates them cleverly and generates groups of 4 decimal digits. It so
happens that it does NOT require long long division.
If long is > 32 bits, division of 64-bit values is relatively easy, and we
will use the first algorithm. If long long is > 64 bits (strange
architecture with VERY large long long), second algorithm can't be used,
and we again use the first one.
Else (if long is 32 bits and long long is 64 bits) we use second one.
And third: there is a simple optimization which takes fast path not only
for zero as was done before, but for all one-digit numbers.
In all tested cases new code is faster than old one, in many cases by 30%,
in few cases by more than 50% (for example, on x86-32, conversion of
12345678). Code growth is ~0 in 32-bit case and ~130 bytes in 64-bit
case.
This patch is based upon an original from Michal Nazarewicz.
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Douglas W Jones <jones@cs.uiowa.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The '%p' output of the kernel's vsprintf() uses spec.field_width to
determine how many digits to output based on 2 * sizeof(void*) so that all
digits of a pointer are shown. ie. a pointer will be output as
"001A2B3C" instead of "1A2B3C". However, if the '#' flag is used in the
format (%#p), then the code doesn't take into account the width of the
'0x' prefix and will end up outputing "0x1A2B3C" instead of "0x001A2B3C".
This patch reworks the "pointer()" format hook to include 2 characters for
the '0x' prefix if the '#' flag is included.
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the module-wide pr_fmt() mechanism rather than open-coding "genirq: "
everywhere.
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sethostname() and setdomainname() notify userspace on failure (without
modifying uts_kern_table). Change things so that we only notify userspace
on success, when uts_kern_table was actually modified.
Signed-off-by: Sasikantha babu <sasikanth.v19@gmail.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: WANG Cong <amwang@redhat.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This driver uses PCI_CLASS_REVISION instead of PCI_REVISION_ID, so it
wasn't converted by 44c10138fd ("PCI: Change all drivers to use
pci_device->revision").
In one case, it even reads PCI revision ID without using it -- that code
is now removed...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com>
Cc: Eric Moore <eric.moore@lsi.com>
Acked-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the comment of allocate_resource(), the explanation of parameter max
and min is not correct.
Actually, these two parameters are used to specify the range of the
resource that will be allocated, not the min/max size that will be
allocated.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ULONG_MAX is often used to check for integer overflow when calculating
allocation size. While ULONG_MAX happens to work on most systems, there
is no guarantee that `size_t' must be the same size as `long'.
This patch introduces SIZE_MAX, the maximum value of `size_t', to improve
portability and readability for allocation size validation.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Acked-by: Alex Elder <elder@dreamhost.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the new kmalloc_array() to the list of general-purpose memory
allocators in chapter 14.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Acked-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit d065bd810b ("mm: retry page fault when blocking on disk
transfer") and commit 37b23e0525 ("x86,mm: make pagefault killable")
introduced changes into the x86 pagefault handler for making the page
fault handler retryable as well as killable.
These changes reduce the mmap_sem hold time, which is crucial during OOM
killer invocation.
Port these changes to um.
Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This allocation may be large. The code is probing to see if it will
succeed and if not, it falls back to vmalloc(). We should suppress any
page-allocation failure messages when the fallback happens.
Reported-by: Dave Jones <davej@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Whoops: first, I reimplemented the already-existing has_resources
without noticing; second, I got the test backwards. I did pick a better
name, though. Combine the two....
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the NFSv4.1 client-reboot case we're currently removing the client's
previous state in exchange_id. That's wrong--we should be waiting till
the confirming create_session.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The comment is redundant, and if we really want dprintk's here they'd
probably be better in the common (check-slot_seqid) code.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The client should ignore the returned sequence_id in the case where the
CONFIRMED flag is set on an exchange_id reply--and in the unconfirmed
case "1" is always the right response. So it shouldn't actually matter
what we return here.
We could continue returning 1 just to catch clients ignoring the spec
here, but I'd rather be generous. Other things equal, returning the
existing sequence_id seems more informative.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Otherwise nfsd4_set_ex_flags writes over the return flags.
Reported-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This can't happen:
- cl_time is zeroed only by unhash_client_locked, which is only
ever called under both the state lock and the client lock.
- every caller of renew_client() should have looked up a
(non-expired) client and then called renew_client() all
without dropping the state lock.
- the only other caller of renew_client_locked() is
release_session_client(), which first checks under the
client_lock that the cl_time is nonzero.
So make it clear that this is a bug, not something we handle. I can't
quite bring myself to make this a BUG(), though, as there are a lot of
renew_client() callers, and returning here is probably safer than a
BUG().
We'll consider making it a BUG() after some more cleanup.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The cases here divide into two main categories:
- if there's an uncomfirmed record with a matching verifier,
then this is a "normal", succesful case: we're either creating
a new client, or updating an existing one.
- otherwise, this is a weird case: a replay, or a server reboot.
Reordering to reflect that makes the code a bit more concise and the
logic a lot easier to understand.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Note CLID_INUSE is for the case where two clients are trying to use the
same client-provided long-form client identifiers. But what we're
looking at here is the server-returned shorthand client id--if those
clash there's a bug somewhere.
Fix the error return, pull the check out into common code, and do the
check unconditionally in all cases.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
New clients are created only by nfsd4_setclientid(), which always gives
any new client a unique clientid. The only exception is in the
"callback update" case, in which case it may create an unconfirmed
client with the same clientid as a confirmed client. In that case it
also checks that the confirmed client has the same credential.
Therefore, it is pointless for setclientid_confirm to check whether a
confirmed and unconfirmed client with the same clientid have matching
credentials--they're guaranteed to.
Instead, it should be checking whether the credential on the
setclientid_confirm matches either of those. Otherwise, it could be
anyone sending the setclientid_confirm. Granted, I can't see why anyone
would, but still it's probalby safer to check.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the rq_flavor into struct svc_cred, and use it in setclientid and
exchange_id comparisons as well.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The typical setclientid or exchange_id will probably be performed with a
credential that maps to either root or nobody, so comparing just uid's
is unlikely to be useful. So, use everything else we can get our hands
on.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Instead of keeping the principal name associated with a request in a
structure that's private to auth_gss and using an accessor function,
move it to svc_cred.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RFC 5661 actually says we should allow an exchange_id to remove a
matching client, even if the exchange_id comes from a different
principal, *if* the victim client lacks any state.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Following rfc 5661 section 2.4.1, we can permit a 4.1 client to remove
an established 4.0 client's state.
(But we don't allow updates.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We mustn't allow a client to destroy another client with established
state unless it has the right credential.
And some minor cleanup.
(Note: our comparison of credentials is actually pretty bogus currently;
that will need to be fixed in another patch.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
