If process_open1() creates a new open owner, but the open later fails,
the current code will leave the open owner around. It won't be on the
close_lru list, and the client isn't expected to send a CLOSE, so it
will hang around as long as the client does.
Similarly, if process_open1() removes an existing open owner from the
close lru, anticipating that an open owner that previously had no
associated stateid's now will, but the open subsequently fails, then
we'll again be left with the same leak.
Fix both problems.
Reported-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There doesn't seem to be any harm to renewing the client a bit earlier,
when it is looked up. That saves us from having to sprinkle
renew_client calls over quite so many places.
Also remove a redundant comment and do a little cleanup.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This should be a bitwise negate here. It silences a Sparse warning:
fs/nfsd/nfs4xdr.c:693:16: warning: dubious: x & !y
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The result from ipv6_addr_scope() is a set of flags, not a single value,
so we can't just compare the result with IPV6_ADDR_SCOPE_LINKLOCAL.
This patch fixs the problem, and checks for unequal addresses before
scope_id.
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I'd rather put more of these sorts of checks into standardized xdr
decoders for the various types rather than have them cluttering up the
core logic in nfs4proc.c and nfs4state.c.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't use WANT bits yet--and sending them can probably trigger a
BUG() further down.
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
sunrpc implements the rpc_pipefs filesystem type.
Add the alias to have the module requested automatically by the kernel
when the filesystem is mounted.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In response to some review comments, get rid of the somewhat obscure
for-loop with bitops, and improve a comment.
Reported-by: Steve Dickson <steved@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use a separate stateid idr per client, and lookup a stateid by first
finding the client, then looking up the stateid relative to that client.
Also some minor refactoring.
This allows us to improve error returns: we can return expired when the
clientid is not found and bad_stateid when the clientid is found but not
the stateid, as opposed to returning expired for both cases.
I hope this will also help to replace the state lock mostly by a
per-client lock, but that hasn't been done yet.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Test_stateid is 4.1-only and only allowed after a sequence operation, so
this check is unnecessary.
Cc: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The idr system is designed exactly for generating id and looking up
integer id's. Thanks to Trond for pointing it out.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I'm not sure why I used a new field for this originally.
Also, the differences between some of these flags are a little subtle;
add some comments to explain.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Yet another open-management regression:
- nfs4_file_downgrade() doesn't remove the BOTH access bit on
downgrade, so the server's idea of the stateid's access gets
out of sync with the client's. If we want to keep an O_RDWR
open in this case, we should do that in the file_put_access
logic rather than here.
- We forgot to convert v4 access to an open mode here.
This logic has proven too hard to get right. In the future we may
consider:
- reexamining the lock/openowner relationship (locks probably
don't really need to take their own references here).
- adding open upgrade/downgrade support to the vfs.
- removing the atomic operations. They're redundant as long as
this is all under some other lock.
Also, maybe some kind of additional static checking would help catch
O_/NFS4_SHARE_ACCESS confusion.
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Look up closed stateid's in the stateid hash like any other stateid
rather than searching the close lru.
This is simpler, and fixes a bug: currently we handle only the case of a
close that is the last close for a given stateowner, but not the case of
a close for a stateowner that still has active opens on other files.
Thus in a case like:
open(owner, file1)
open(owner, file2)
close(owner, file2)
close(owner, file2)
the final close won't be recognized as a retransmission.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Including the full clientid in the on-the-wire stateid allows more
reliable detection of bad vs. expired stateid's, simplifies code, and
ensures we won't reuse the opaque part of the stateid (as we currently
do when the same openowner closes and reopens the same file).
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Keep around an unhashed copy of the final stateid after the last close
using an openowner, and when identifying a replay, match against that
stateid instead of just against the open owner id. Free it the next
time the seqid is bumped or the stateowner is destroyed.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For checking the size of reply before calling a operation,
we need try to get maxsize of the operation's reply.
v3: using new method as Bruce said,
"we could handle operations in two different ways:
- For operations that actually change something (write, rename,
open, close, ...), do it the way we're doing it now: be
very careful to estimate the size of the response before even
processing the operation.
- For operations that don't change anything (read, getattr, ...)
just go ahead and do the operation. If you realize after the
fact that the response is too large, then return the error at
that point.
So we'd add another flag to op_flags: say, OP_MODIFIES_SOMETHING. And for
operations with OP_MODIFIES_SOMETHING set, we'd do the first thing. For
operations without it set, we'd do the second."
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
[bfields@redhat.com: crash, don't attempt to handle, undefined op_rsize_bop]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For ipv6 link-local addresses, sunrpc do not compare those scope id.
This patch let sunrpc compares scope id only on link-local addresses.
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For IPv6 local address, lockd can not callback to client for
missing scope id when binding address at inet6_bind:
324 if (addr_type & IPV6_ADDR_LINKLOCAL) {
325 if (addr_len >= sizeof(struct sockaddr_in6) &&
326 addr->sin6_scope_id) {
327 /* Override any existing binding, if another one
328 * is supplied by user.
329 */
330 sk->sk_bound_dev_if = addr->sin6_scope_id;
331 }
332
333 /* Binding to link-local address requires an interface */
334 if (!sk->sk_bound_dev_if) {
335 err = -EINVAL;
336 goto out_unlock;
337 }
Replacing svc_addr_u by sockaddr_storage, let rqstp->rq_daddr contains more info
besides address.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[ cel: since this is server-side, use nfsd4_ prefix instead of nfs4_ prefix. ]
[ cel: implement S_ISVTX filter in bfields-normal form ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There are no more users...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current code is sort of hackish in that it assumes a referral is always
matched to an export. When we add support for junctions that may not be the
case.
We can replace nfsd4_path() with a function that encodes the components
directly from the dentries. Since nfsd4_path is currently the only user of
the 'ex_pathname' field in struct svc_export, this has the added benefit
of allowing us to get rid of that.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
First, we shouldn't care here about the structure of the opaque part of
the stateid. Second, this hash is really dumb. (I'm not sure the
replacement is much better, though--to look at it another patch.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We want delegations to share more with open/lock stateid's, so first
we'll pull out some of the common stuff we want to share.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move most of this into helper functions. Also move the non-CONFIRM case
into caller, providing a helper function for that purpose.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The stateowner has some fields that only make sense for openowners, and
some that only make sense for lockowners, and I find it a lot clearer if
those are separated out.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the CLOSE_STATE case into the unique caller that cares about it
rather than putting it in preprocess_seqid_op.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I don't see the point of having this check in nfs4_preprocess_seqid_op()
when it's only needed by the one caller.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
