This feature synchronizes multiple displays with various timings
to a display with the highest refresh rate
it is enabled if edid caps flag multi_display_sync is set to one
There are limitations on refresh rates allowed
that can be synchronized. That would
prevent from underflow and other potential
corruptions.
Multi display synchronization is using the
same functions as timing_sync in order to minimize
redunduncy and decision to disable synchronization is
based on trigger parametre set in DM
Feature is developed for DCN1 and DCE11
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to move HDR Metadata from Surface to Stream since there is only one
infoframe possible per stream.
Also cleaning up some duplicate definitions.
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
front end is initialized during init_hw, but not
power gated. There are some left over valuse and will
cause some diags test failed. Power gated all front
end pipes will make sure every test has same starting
point.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the programming sequence to allow DMCU firmware to be loaded by
PSP. This code detects whether the firmware is loaded and does a check
to verify the expected interface version and checks for correct response
from micro controller.
Added registry key method to allow force loading of firmware from kernel
mode driver for test purposes. This is old method of firmware loading
without PSP.
Moved some init sequences into dc/dmcu.
Changed loading sequence to initialize IRAM after firmware completely
loaded. Firmware will now disable features that use IRAM
until initialized.
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Program cursor attributes during set mode is only needed
in case of pipe slipt, bottom pipe should be programmed
same as top pipe. Need to program if address is 0.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/log_helpers.c:79
dc_conn_log() error: buffer overflow 'signal_type_info_tbl' 10 <= 10
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:266
bios_parser_get_dst_obj() error: uninitialized symbol 'id'.
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_audio.c:357
dce_aud_az_enable() warn: inconsistent indenting
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_resource.c:958
dcn10_acquire_idle_pipe_for_layer() error: we previously assumed
'head_pipe' could be null (see line 952)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We assign "v_init = asic_blank_start;" a few lines earlier so there is
no need to do it again inside the if statements. Also "v_init" is
unsigned so it can't be less than zero.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static analysis tools get annoyed that we don't indent this if
statement. Actually, the if statement isn't required because kfree()
can handle NULL pointers just fine. The DCE110STRENC_FROM_STRENC()
macro is a wrapper around container_of() but it's basically a no-op or a
cast. Anyway, it's not really appropriate here so it should be removed
as well.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set hardcode_coeff only when BOTH chroma and luma taps are
more than 1
without this underscan with h or v set to 0 darkens
the screen (either h or v set to 0, not both)
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Half screen gamma setting and cursor are incorrect
when switching mode through win+p due to wrong programming
gamma sequence (In case of bottom pipe, gamma and cursor are
programmed before front end programmed, pipe is power gated).
change:
1. Cache curor attributes to stream
2. Move set gamma and cursor inside front end
programming.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were overwriting the whole register which was re-enabling
stutter for raven. Now we are reading the register then setting
the values only for pstate.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
