In commit 482812d566 ("drm/amd/display: Set max TTU on
DPG enable"), "hubp.h" was added which caused the duplicate include.
To be on the safe side, remove the later duplicate include.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Our driver supports overlay planes, and as expected, some userspace
compositor takes advantage of these features. If the userspace is not
enabling the cursor, they can use multiple planes as they please.
Nevertheless, we start to have constraints when userspace tries to
enable hardware cursor with various planes. Basically, we cannot draw
the cursor at the same size and position on two separated pipes since it
uses extra bandwidth and DML only run with one cursor.
For those reasons, when we enable hardware cursor and multiple planes,
our driver should accept variations like the ones described below:
+-------------+ +--------------+
| +---------+ | | |
| |Primary | | | Primary |
| | | | | Overlay |
| +---------+ | | |
|Overlay | | |
+-------------+ +--------------+
In this scenario, we can have the desktop UI in the overlay and some
other framebuffer attached to the primary plane (e.g., video). However,
userspace needs to obey some rules and avoid scenarios like the ones
described below (when enabling hw cursor):
+--------+
|Overlay |
+-------------+ +-----+-------+ +-| |--+
| +--------+ | +--------+ | | +--------+ |
| |Overlay | | |Overlay | | | |
| | | | | | | | |
| +--------+ | +--------+ | | |
| Primary | | Primary | | Primary |
+-------------+ +-------------+ +-------------+
+-------------+ +-------------+
| +--------+ | Primary |
| |Overlay | | |
| | | | |
| +--------+ | +--------+ |
| Primary | | |Overlay | |
+-------------+ +-| |--+
+--------+
If the userspace violates some of the above scenarios, our driver needs
to reject the commit; otherwise, we can have unexpected behavior. Since
we don't have a proper driver validation for the above case, we can see
some problems like a duplicate cursor in applications that use multiple
planes. This commit fixes the cursor issue and others by adding adequate
verification for multiple planes.
Change since V1 (Harry and Sean):
- Remove cursor verification from the equation.
Cc: Louis Li <Ching-shih.Li@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following build warnings.
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:
In function ‘dm_update_mst_vcpi_slots_for_dsc’:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:6242:46:
warning: variable ‘old_con_state’ set but not used
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:
In function ‘amdgpu_dm_commit_cursors’:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:7709:44:
warning: variable ‘new_plane_state’ set but not used
The variables were introduced to be used in iterators, but not used.
Use other iterators which don't require the unused variables.
Fixes: 8ad278062d ("drm/amd/display: Disable cursors before disabling planes")
Fixes: 29b9ba74f6 ("drm/amd/display: Recalculate VCPI slots for new DSC connectors")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the function documentation, I removed the excess parameters,
described the undocumented ones, and fixed the syntax errors.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was missing when this structure was updated.
Fixes: 46a83eba27 ("drm/amd/display: Add debugfs to control DMUB trace buffer events")
Reviewed-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The runtime resume PM op disregards the return value from
amdgpu_device_resume(), masking errors for failed resumes at the PM
layer.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Pavan Kumar Ramayanam <pavan.ramayanam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sriov gets suspend of IP block <dce_virtual> failed as return
value was not initialized.
v2: return 0 directly to align original code semantic before this
was broken out into a separate helper function instead of setting
initial values
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The wave's number per simd in aldebaran is changed to 8, so it is
impossible to use old algorithm to initiate all sgprs with one
threadgroup. The new algorithm firstly use three threadgroups to
initiate most sgprs simultaneously and then use another threadgroup with
4 waves to cover other uninitiated sgprs.
v2:
Add more description about the new algorithm to clear sgprs and add some
comment for shader binaries
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After draining the stale retry fault, or failed to validate the range
to recover, have to remove the fault address from fault filter ring, to
be able to handle subsequent retry interrupt on same address. Otherwise
the retry fault will not be processed to recover until timeout passed.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add interface to remove address from fault filter ring by resetting
fault ring entry key, then future vm fault on the address will be
processed to recover.
Define fault key as atomic64_t type to use atomic read/set/cmpxchg key
to protect fault ring access by interrupt handler and interrupt deferred
work for vg20. Change fault->timestamp to 48-bit to share same uint64_t
with 8-bit fault->next, it is enough for 48bit IH timestamp.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Retry fault interrupt maybe pending in IH ring after GPU page table
is updated to recover the vm fault, because each page of the range
generate retry fault interrupt. There is race if application unmap
range to remove and free the range first and then retry fault work
restore_pages handle the retry fault interrupt, because range can not be
found, this vm fault can not be recovered and report incorrect GPU vm
fault to application.
Before unmap to remove and free range, drain retry fault interrupt
from IH ring1 to ensure no retry fault comes after the range is removed.
Drain retry fault interrupt skip the range which is on deferred list
to remove, or the range is child range, which is split by unmap, does
not add to svms and have interval notifier.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sometimes IH do not setup ring wptr overflow flag after wptr exceed
rptr. As a workaround, if IH rptr equals to wptr, ring is empty,
return true to indicate IH ring checkpoint is processed, IH ring drain
is finished.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPU vm retry fault recover range need retry validation if
1. range is split in parallel by unmap while recover
2. range migrate to system memory and range is updated in system
memory while recover
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable all ip's hw status to false before any hw_init.
Only set it to true until its hw_init is executed.
The old 5.9 branch has this change but somehow the 5.11 kernrel does
not have this fix.
Without this change, sriov tdr have gfx IB test fail.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Review-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge the two loops, loosen the restriction for big allocations.
This reduces the CPU overhead in the good case, but increases
it a bit under memory pressure.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-and-Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use devm_memunmap_pages instead of memunmap_pages to release pgmap
and remove pgmap from device action, to avoid double free pgmap when
unloading driver module.
Release device memory region if failed to create device memory pages
structure.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
As hardware team suggested that we need to add a max dsc bw overhead
into existing stream bandwidth when DSC is used.
The formula as below:
max_dsc_bw_overhead =
v_addressable * slice_count * 256 bit * pixel clock / v_total / h_total
effective stream bandwidth = pixel clock * bpp
stream bandwidth = effective stream bandwidth + dsc stream overhead
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Wayne Lin <waynelin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add a per-connector debugfs entry to expose internal display flag,
which is indication that the display is "internally connected"
and not hotpluggable.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver program dpp clock calculate by pipe split config but hw config is single pipe.
[How]
Skip programming clock when allow seamless boot.
After porgramming pipe config, seamless boot flag will be clear.
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Wayne Lin <waynelin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This change only fix dpp clock switch to lower case.
New solution later can fix both case, which is "dc: skip
program clock when allow seamless boot"
[How]
This reverts commit "dc: wait vblank when stream enabled
and update dpp clock"
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Wayne Lin <waynelin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
