-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXSMhUgAKCRCRxhvAZXjc
okkiAQC3Hlg/O2JoIb4PqgEvBkpHSdVxyuWagn0ksjACW9ANKQEAl5OadMhvOq16
UHGhKlpE/M8HflknIffoEGlIAWHrdwU=
=7kP5
-----END PGP SIGNATURE-----
Merge tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd updates from Christian Brauner:
"This adds two main features.
- First, it adds polling support for pidfds. This allows process
managers to know when a (non-parent) process dies in a race-free
way.
The notification mechanism used follows the same logic that is
currently used when the parent of a task is notified of a child's
death. With this patchset it is possible to put pidfds in an
{e}poll loop and get reliable notifications for process (i.e.
thread-group) exit.
- The second feature compliments the first one by making it possible
to retrieve pollable pidfds for processes that were not created
using CLONE_PIDFD.
A lot of processes get created with traditional PID-based calls
such as fork() or clone() (without CLONE_PIDFD). For these
processes a caller can currently not create a pollable pidfd. This
is a problem for Android's low memory killer (LMK) and service
managers such as systemd.
Both patchsets are accompanied by selftests.
It's perhaps worth noting that the work done so far and the work done
in this branch for pidfd_open() and polling support do already see
some adoption:
- Android is in the process of backporting this work to all their LTS
kernels [1]
- Service managers make use of pidfd_send_signal but will need to
wait until we enable waiting on pidfds for full adoption.
- And projects I maintain make use of both pidfd_send_signal and
CLONE_PIDFD [2] and will use polling support and pidfd_open() too"
[1] https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.9+backport%22https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.14+backport%22https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.19+backport%22
[2] aab6e3eb73/src/lxc/start.c (L1753)
* tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: add pidfd_open() tests
arch: wire-up pidfd_open()
pid: add pidfd_open()
pidfd: add polling selftests
pidfd: add polling support
When CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is enabled (uncommon), we have a
series of WARN_ON's in arch_local_irq_restore().
These are "should never happen" conditions, but if they do happen they
can flood the console and render the system unusable. So switch them
to WARN_ON_ONCE().
Fixes: e2b36d5917 ("powerpc/64: Don't trace code that runs with the soft irq mask unreconciled")
Fixes: 9b81c0211c ("powerpc/64s: make PACA_IRQ_HARD_DIS track MSR[EE] closely")
Fixes: 7c0482e3d0 ("powerpc/irq: Fix another case of lazy IRQ state getting out of sync")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190708061046.7075-1-mpe@ellerman.id.au
- Improve the handling of shared ACPI power resources in the PCI
bus type layer (Mika Westerberg).
- Make the PCI layer take link delays required by the PCIe spec
into account as appropriate and avoid polling devices in D3cold
for PME (Mika Westerberg).
- Fix some corner case issues in ACPI device power management and
in the PCI bus type layer, optimiza and clean up the handling of
runtime-suspended PCI devices during system-wide transitions to
sleep states (Rafael Wysocki).
- Rework hibernation handling in the ACPI core and the PCI bus type
to resume runtime-suspended devices before hibernation (which
allows some functional problems to be avoided) and fix some ACPI
power management issues related to hiberation (Rafael Wysocki).
- Extend the operating performance points (OPP) framework to support
a wider range of devices (Rajendra Nayak, Stehpen Boyd).
- Fix issues related to genpd_virt_devs and issues with platforms
using the set_opp() callback in the OPP framework (Viresh Kumar,
Dmitry Osipenko).
- Add new cpufreq driver for Raspberry Pi (Nicolas Saenz Julienne).
- Add new cpufreq driver for imx8m and imx7d chips (Leonard Crestez).
- Fix and clean up the pcc-cpufreq, brcmstb-avs-cpufreq, s5pv210,
and armada-37xx cpufreq drivers (David Arcari, Florian Fainelli,
Paweł Chmiel, YueHaibing).
- Clean up and fix the cpufreq core (Viresh Kumar, Daniel Lezcano).
- Fix minor issue in the ACPI system sleep support code and export
one function from it (Lenny Szubowicz, Dexuan Cui).
- Clean up assorted pieces of PM code and documentation (Kefeng Wang,
Andy Shevchenko, Bart Van Assche, Greg Kroah-Hartman, Fuqian Huang,
Geert Uytterhoeven, Mathieu Malaterre, Rafael Wysocki).
- Update the pm-graph utility to v5.4 (Todd Brandt).
- Fix and clean up the cpupower utility (Abhishek Goel, Nick Black).
-----BEGIN PGP SIGNATURE-----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=aBN3
-----END PGP SIGNATURE-----
Merge tag 'pm-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update PCI and ACPI power management (improved handling of ACPI
power resources and PCIe link delays, fixes related to corner cases,
hibernation handling rework), fix and extend the operating performance
points (OPP) framework, add new cpufreq drivers for Raspberry Pi and
imx8m chips, update some other cpufreq drivers, clean up assorted
pieces of PM code and documentation and update tools.
Specifics:
- Improve the handling of shared ACPI power resources in the PCI bus
type layer (Mika Westerberg).
- Make the PCI layer take link delays required by the PCIe spec into
account as appropriate and avoid polling devices in D3cold for PME
(Mika Westerberg).
- Fix some corner case issues in ACPI device power management and in
the PCI bus type layer, optimiza and clean up the handling of
runtime-suspended PCI devices during system-wide transitions to
sleep states (Rafael Wysocki).
- Rework hibernation handling in the ACPI core and the PCI bus type
to resume runtime-suspended devices before hibernation (which
allows some functional problems to be avoided) and fix some ACPI
power management issues related to hiberation (Rafael Wysocki).
- Extend the operating performance points (OPP) framework to support
a wider range of devices (Rajendra Nayak, Stehpen Boyd).
- Fix issues related to genpd_virt_devs and issues with platforms
using the set_opp() callback in the OPP framework (Viresh Kumar,
Dmitry Osipenko).
- Add new cpufreq driver for Raspberry Pi (Nicolas Saenz Julienne).
- Add new cpufreq driver for imx8m and imx7d chips (Leonard Crestez).
- Fix and clean up the pcc-cpufreq, brcmstb-avs-cpufreq, s5pv210, and
armada-37xx cpufreq drivers (David Arcari, Florian Fainelli, Paweł
Chmiel, YueHaibing).
- Clean up and fix the cpufreq core (Viresh Kumar, Daniel Lezcano).
- Fix minor issue in the ACPI system sleep support code and export
one function from it (Lenny Szubowicz, Dexuan Cui).
- Clean up assorted pieces of PM code and documentation (Kefeng Wang,
Andy Shevchenko, Bart Van Assche, Greg Kroah-Hartman, Fuqian Huang,
Geert Uytterhoeven, Mathieu Malaterre, Rafael Wysocki).
- Update the pm-graph utility to v5.4 (Todd Brandt).
- Fix and clean up the cpupower utility (Abhishek Goel, Nick Black)"
* tag 'pm-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (57 commits)
ACPI: PM: Make acpi_sleep_state_supported() non-static
PM: sleep: Drop dev_pm_skip_next_resume_phases()
ACPI: PM: Unexport acpi_device_get_power()
Documentation: ABI: power: Add missing newline at end of file
ACPI: PM: Drop unused function and function header
ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS
ACPI: PM: Simplify and fix PM domain hibernation callbacks
PCI: PM: Simplify bus-level hibernation callbacks
PM: ACPI/PCI: Resume all devices during hibernation
cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update()
cpufreq: Consolidate cpufreq_update_current_freq() and __cpufreq_get()
kernel: power: swap: use kzalloc() instead of kmalloc() followed by memset()
cpufreq: Don't skip frequency validation for has_target() drivers
PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete()
PCI / ACPI: Add _PR0 dependent devices
ACPI / PM: Introduce concept of a _PR0 dependent device
PCI / ACPI: Use cached ACPI device state to get PCI device power state
ACPI: PM: Allow transitions to D0 to occur in special cases
ACPI: PM: Avoid evaluating _PS3 on transitions from D3hot to D3cold
cpufreq: Use has_target() instead of !setpolicy
...
Pull force_sig() argument change from Eric Biederman:
"A source of error over the years has been that force_sig has taken a
task parameter when it is only safe to use force_sig with the current
task.
The force_sig function is built for delivering synchronous signals
such as SIGSEGV where the userspace application caused a synchronous
fault (such as a page fault) and the kernel responded with a signal.
Because the name force_sig does not make this clear, and because the
force_sig takes a task parameter the function force_sig has been
abused for sending other kinds of signals over the years. Slowly those
have been fixed when the oopses have been tracked down.
This set of changes fixes the remaining abusers of force_sig and
carefully rips out the task parameter from force_sig and friends
making this kind of error almost impossible in the future"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
signal: Remove the signal number and task parameters from force_sig_info
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Generate the siginfo in force_sig
signal: Move the computation of force into send_signal and correct it.
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Remove the task parameter from force_sig_fault
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Explicitly call force_sig_fault on current
signal/unicore32: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from ptrace_break
signal/nds32: Remove tsk parameter from send_sigtrap
signal/riscv: Remove tsk parameter from do_trap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/um: Remove task parameter from send_sigtrap
signal/x86: Remove task parameter from send_sigtrap
signal: Remove task parameter from force_sig_mceerr
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sigsegv
...
Pull SMP/hotplug updates from Thomas Gleixner:
"A small set of updates for SMP and CPU hotplug:
- Abort disabling secondary CPUs in the freezer when a wakeup is
pending instead of evaluating it only after all CPUs have been
offlined.
- Remove the shared annotation for the strict per CPU cfd_data in the
smp function call core code.
- Remove the return values of smp_call_function() and on_each_cpu()
as they are unconditionally 0. Fixup the few callers which actually
bothered to check the return value"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Remove smp_call_function() and on_each_cpu() return values
smp: Do not mark call_function_data as shared
cpu/hotplug: Abort disabling secondary CPUs if wakeup is pending
cpu/hotplug: Fix notify_cpu_starting() reference in bringup_wait_for_ap()
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
- Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
manage the permissions of executable vmalloc regions more strictly
- Slight performance improvement by keeping softirqs enabled while
touching the FPSIMD/SVE state (kernel_neon_begin/end)
- Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG
and AXFLAG instructions for floating point comparison flags
manipulation) and FRINT (rounding floating point numbers to integers)
- Re-instate ARM64_PSEUDO_NMI support which was previously marked as
BROKEN due to some bugs (now fixed)
- Improve parking of stopped CPUs and implement an arm64-specific
panic_smp_self_stop() to avoid warning on not being able to stop
secondary CPUs during panic
- perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
platforms
- perf: DDR performance monitor support for iMX8QXP
- cache_line_size() can now be set from DT or ACPI/PPTT if provided to
cope with a system cache info not exposed via the CPUID registers
- Avoid warning on hardware cache line size greater than
ARCH_DMA_MINALIGN if the system is fully coherent
- arm64 do_page_fault() and hugetlb cleanups
- Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
- Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags'
introduced in 5.1)
- CONFIG_RANDOMIZE_BASE now enabled in defconfig
- Allow the selection of ARM64_MODULE_PLTS, currently only done via
RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
over into the vmalloc area
- Make ZONE_DMA32 configurable
-----BEGIN PGP SIGNATURE-----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=0TDT
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
- Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
manage the permissions of executable vmalloc regions more strictly
- Slight performance improvement by keeping softirqs enabled while
touching the FPSIMD/SVE state (kernel_neon_begin/end)
- Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new
XAFLAG and AXFLAG instructions for floating point comparison flags
manipulation) and FRINT (rounding floating point numbers to integers)
- Re-instate ARM64_PSEUDO_NMI support which was previously marked as
BROKEN due to some bugs (now fixed)
- Improve parking of stopped CPUs and implement an arm64-specific
panic_smp_self_stop() to avoid warning on not being able to stop
secondary CPUs during panic
- perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
platforms
- perf: DDR performance monitor support for iMX8QXP
- cache_line_size() can now be set from DT or ACPI/PPTT if provided to
cope with a system cache info not exposed via the CPUID registers
- Avoid warning on hardware cache line size greater than
ARCH_DMA_MINALIGN if the system is fully coherent
- arm64 do_page_fault() and hugetlb cleanups
- Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
- Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the
'arm_boot_flags' introduced in 5.1)
- CONFIG_RANDOMIZE_BASE now enabled in defconfig
- Allow the selection of ARM64_MODULE_PLTS, currently only done via
RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
over into the vmalloc area
- Make ZONE_DMA32 configurable
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
perf: arm_spe: Enable ACPI/Platform automatic module loading
arm_pmu: acpi: spe: Add initial MADT/SPE probing
ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
ACPI/PPTT: Modify node flag detection to find last IDENTICAL
x86/entry: Simplify _TIF_SYSCALL_EMU handling
arm64: rename dump_instr as dump_kernel_instr
arm64/mm: Drop [PTE|PMD]_TYPE_FAULT
arm64: Implement panic_smp_self_stop()
arm64: Improve parking of stopped CPUs
arm64: Expose FRINT capabilities to userspace
arm64: Expose ARMv8.5 CondM capability to userspace
arm64: defconfig: enable CONFIG_RANDOMIZE_BASE
arm64: ARM64_MODULES_PLTS must depend on MODULES
arm64: bpf: do not allocate executable memory
arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages
arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP
arm64: module: create module allocations without exec permissions
arm64: Allow user selection of ARM64_MODULE_PLTS
acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
arm64: Allow selecting Pseudo-NMI again
...
* pm-sleep:
PM: sleep: Drop dev_pm_skip_next_resume_phases()
ACPI: PM: Drop unused function and function header
ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS
ACPI: PM: Simplify and fix PM domain hibernation callbacks
PCI: PM: Simplify bus-level hibernation callbacks
PM: ACPI/PCI: Resume all devices during hibernation
kernel: power: swap: use kzalloc() instead of kmalloc() followed by memset()
PM: sleep: Update struct wakeup_source documentation
drivers: base: power: remove wakeup_sources_stats_dentry variable
PM: suspend: Rename pm_suspend_via_s2idle()
PM: sleep: Show how long dpm_suspend_start() and dpm_suspend_end() take
PM: hibernate: powerpc: Expose pfn_is_nosave() prototype
To increase readability/maintainability, replace hard coded
instructions values by symbolic names.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Fix R_PPC64_ENTRY case, the addi reads from r2 not r12]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To increase readability/maintainability, replace hard coded
instructions values by symbolic names.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PPC_HA() PPC_HI() and PPC_LO() macros are nice macros. Move them
from module64.c to ppc-opcode.h in order to use them in other places.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Clean up formatting in new code, drop duplicates in ftrace.c]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The comment here is wrong, the addi reads from r2 not r12. The code is
correct, 0x38420000 = addi r2,r2,0.
Fixes: a61674bdfc ("powerpc/module: Handle R_PPC64_ENTRY relocations")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On most arches having function flush_dcache_range(), including PPC32,
this function does a writeback and invalidation of the cache bloc.
On PPC64, flush_dcache_range() only does a writeback while
flush_inval_dcache_range() does the invalidation in addition.
In addition it looks like within arch/powerpc/, there are no PPC64
platforms using flush_dcache_range()
This patch drops the existing 64 bits version of flush_dcache_range()
and renames flush_inval_dcache_range() into flush_dcache_range().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The pseries platform uses the PCI_PROBE_DEVTREE method of PCI probing
which reads "assigned-addresses" of every PCI device and initializes
the device resources. However if the property is missing or zero sized,
then there is no fallback of any kind and the PCI resources remain
undiscovered, i.e. pdev->resource[] array remains empty.
This adds a fallback which parses the "reg" property in pretty much same
way except it marks resources as "unset" which later make Linux assign
those resources proper addresses.
This has an effect when:
1. a hypervisor failed to assign any resource for a device;
2. /chosen/linux,pci-probe-only=0 is in the DT so the system may try
assigning a resource.
Neither is likely to happen under PowerVM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The commit 8617a5c5bc ("powerpc/dma: handle iommu bypass in
dma_iommu_ops") merged direct DMA ops into the IOMMU DMA ops allowing
SWIOTLB as well but only for mapping; the unmapping and bouncing parts
were left unmodified.
This adds missing direct unmapping calls to .unmap_page() and
.unmap_sg().
This adds missing sync callbacks and directs them to the direct DMA
hooks.
Fixes: 8617a5c5bc ("powerpc/dma: handle iommu bypass in dma_iommu_ops")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the dma_get_mask() helper from dma-mapping.h instead, as they are
functionally identical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If you compile with KVM but without CONFIG_HAVE_HW_BREAKPOINT you fail
at linking with:
arch/powerpc/kvm/book3s_hv_rmhandlers.o:(.text+0x708): undefined reference to `dawr_force_enable'
This was caused by commit c1fe190c06 ("powerpc: Add force enable of
DAWR on P9 option").
This moves a bunch of code around to fix this. It moves a lot of the
DAWR code in a new file and creates a new CONFIG_PPC_DAWR to enable
compiling it.
Fixes: c1fe190c06 ("powerpc: Add force enable of DAWR on P9 option")
Signed-off-by: Michael Neuling <mikey@neuling.org>
[mpe: Minor formatting in set_dawr()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In commit c1fe190c06 ("powerpc: Add force enable of DAWR on P9
option") the following piece of code was added:
smp_call_function((smp_call_func_t)set_dawr, &null_brk, 0);
Since GCC 8 this triggers the following warning about incompatible
function types:
arch/powerpc/kernel/hw_breakpoint.c:408:21: error: cast between incompatible function types from 'int (*)(struct arch_hw_breakpoint *)' to 'void (*)(void *)' [-Werror=cast-function-type]
Since the warning is there for a reason, and should not be hidden behind
a cast, provide an intermediate callback function to avoid the warning.
Fixes: c1fe190c06 ("powerpc: Add force enable of DAWR on P9 option")
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This makes it clear to the caller that it can only be used on POWER9
and later CPUs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use "ISA_3_0" rather than "ARCH_300"]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Branch to the relocated 0xc000 address early (still in real mode), to
simplify subsequent branches. Have the virt mode handler avoid just
'windup' and redo the exception from scratch, rather than branching
back to the trampoline.
Rearrange the stack setup instruction location to match the system
reset handler (e.g., right before EXCEPTION_PROLOG_COMMON).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Follow convention and move tramp ahead of common.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The idle wake up code in the system reset interrupt is not very
optimal. There are two requirements: perform idle wake up quickly;
and save everything including CFAR for non-idle interrupts, with
no performance requirement.
The problem with placing the idle test in the middle of the handler
and using the normal handler code to save CFAR, is that it's quite
costly (e.g., mfcfar is serialising, speculative workarounds get
applied, SRR1 has to be reloaded, etc). It also prevents the standard
interrupt handler boilerplate being used.
This pain can be avoided by using a dedicated idle interrupt handler
at the start of the interrupt handler, which restores all registers
back to the way they were in case it was not an idle wake up. CFAR
is preserved without saving it before the non-idle case by making that
the fall-through, and idle is a taken branch.
Performance seems to be in the noise, but possibly around 0.5% faster,
the executed instructions certainly look better. The bigger benefit is
being able to drop in standard interrupt handlers after the idle code,
which helps with subsequent cleanup and consolidation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fixup BE by using DOTSYM for idle_return_gpr_loss call]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The bad stack test in interrupt handlers has a few problems. For
performance it is taken in the common case, which is a fetch bubble
and a waste of i-cache.
For code development and maintainence, it requires yet another stack
frame setup routine, and that constrains all exception handlers to
follow the same register save pattern which inhibits future
optimisation.
Remove the test/branch and replace it with a trap. Teach the program
check handler to use the emergency stack for this case.
This does not result in quite so nice a message, however the SRR0 and
SRR1 of the crashed interrupt can be seen in r11 and r12, as is the
original r1 (adjusted by INT_FRAME_SIZE). These are the most important
parts to debugging the issue.
The original r9-12 and cr0 is lost, which is the main downside.
kernel BUG at linux/arch/powerpc/kernel/exceptions-64s.S:847!
Oops: Exception in kernel mode, sig: 5 [#1]
BE SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted
NIP: c000000000009108 LR: c000000000cadbcc CTR: c0000000000090f0
REGS: c0000000fffcbd70 TRAP: 0700 Not tainted
MSR: 9000000000021032 <SF,HV,ME,IR,DR,RI> CR: 28222448 XER: 20040000
CFAR: c000000000009100 IRQMASK: 0
GPR00: 000000000000003d fffffffffffffd00 c0000000018cfb00 c0000000f02b3166
GPR04: fffffffffffffffd 0000000000000007 fffffffffffffffb 0000000000000030
GPR08: 0000000000000037 0000000028222448 0000000000000000 c000000000ca8de0
GPR12: 9000000002009032 c000000001ae0000 c000000000010a00 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: c0000000f00322c0 c000000000f85200 0000000000000004 ffffffffffffffff
GPR24: fffffffffffffffe 0000000000000000 0000000000000000 000000000000000a
GPR28: 0000000000000000 0000000000000000 c0000000f02b391c c0000000f02b3167
NIP [c000000000009108] decrementer_common+0x18/0x160
LR [c000000000cadbcc] .vsnprintf+0x3ec/0x4f0
Call Trace:
Instruction dump:
996d098a 994d098b 38610070 480246ed 48005518 60000000 38200000 718a4000
7c2a0b78 3821fd00 41c20008 e82d0970 <0981fd00> f92101a0 f9610170 f9810178
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since the system reset interrupt began to use its own stack, and
machine check interrupts have done so for some time, r1 can be
changed without clearing MSR[RI], provided no other interrupts
(including SLB misses) are taken.
MSR[RI] does have to be cleared when using SCRATCH0, however.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Although the 0x1500 interrupt only applies to bare metal, it is better
to just use the standard macro for scratch save.
Runtime code path remains unchanged (due to instruction patching).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Restore all SPRs and CR up-front, these are longer latency
instructions. Move register restore around to maximise pairs of
adjacent loads (e.g., restore r0 next to r1).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Duplicate the hmi windup code for both cases, rather than to put a
special case branch in the middle of it. Remove unused label. This
helps with later code consolidation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move in_mce decrement earlier before registers are restored (but
still after RI=0). This helps with later consolidation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
All supported 64s CPUs support mtmsrd L=1 instruction, so a cleanup
can be made in sreset and mce handlers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move SPR reads ahead of writes. Real mode entry that is not a KVM
guest is rare these days, but bad practice propagates.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
syscall / hcall entry unnecessarily differs between KVM and non-KVM
builds. Move the SMT priority instruction to the same location
(after INTERRUPT_TO_KERNEL).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
No generated code change. Final vmlinux is changed only due to change
in bug table line numbers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Generally, macros that result in instructions being expanded are
indented by a tab, and those that don't have no indent. Fix the
obvious cases that go contrary to style.
No generated code change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
After the previous cleanup, it becomes possible to consolidate some
common code outside the runtime alternate patching. Also remove
unused labels.
This results in some code change, but unchanged runtime instruction
sequence.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Many of these macros just specify 1-4 lines which are only called a
few times each at most, and often just once. Remove this indirection.
No generated code change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
More cases of code insertion via macros that does not add a great
deal. All the additions have to be specified in the macro arguments,
so they can just as well go after the macro.
No generated code change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The aim is to reduce the amount of indirection it takes to get through
the exception handler macros, particularly where it provides little
code sharing.
No generated code change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Conditionally expand the skip case if it is specified.
No generated code change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Conditionally expand the soft-masking test if a mask is passed in.
No generated code change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rather than pass in the soft-masking and KVM tests via macro that is
passed to another macro to expand it, switch to usig gas macros and
conditionally expand the soft-masking and KVM tests.
The system reset with its idle test is open coded as it is a one-off.
No generated code change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The sreset handler KVM test theoretically should not depend on P7.
In practice KVM now only supports P7 and up so no real bug fix, but
this change is made now so the quirk is not propagated through
cleanup patches.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- Re-name the macros to _REAL and _VIRT suffixes rather than no and
_RELON suffix.
- Move the macro definitions together in the file.
- Move RELOCATABLE ifdef inside the _VIRT macro.
Further consolidation between variants does not buy much here.
No generated code change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Switch to a gas macro that conditionally expands the RI clearing
instruction.
No generated code change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Replace all instances of this with gas macros that test the hsrr
parameter and use the appropriate register names / labels.
No generated code change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Remove extraneous 2nd check for 0xea0 in SOFTEN_TEST]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The opening comment mark "/**" is reserved for kernel-doc comments, so
it will generate a warning with "make W=1".
arch/powerpc/kernel/eeh_cache.c:37: warning: cannot understand function
prototype: 'struct pci_io_addr_range
Since this is not a kernel-doc for the struct below, but rather an
overview of this source eeh_cache.c, just use the free-form comments
kernel-doc syntax instead.
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The protocol for suspending or migrating an LPAR requires all present
processor threads to enter H_JOIN. So if we have threads offline, we
have to temporarily bring them up. This can race with administrator
actions such as SMT state changes. As of dfd718a2ed ("powerpc/rtas:
Fix a potential race between CPU-Offline & Migration"),
rtas_ibm_suspend_me() accounts for this, but errors out with -EBUSY
for what almost certainly is a transient condition in any reasonable
scenario.
Callers of rtas_ibm_suspend_me() already retry when -EAGAIN is
returned, and it is typical during a migration for that to happen
repeatedly for several minutes polling the H_VASI_STATE hcall result
before proceeding to the next stage.
So return -EAGAIN instead of -EBUSY when this race is
encountered. Additionally: logging this event is still appropriate but
use pr_info instead of pr_err; and remove use of unlikely() while here
as this is not a hot path at all.
Fixes: dfd718a2ed ("powerpc/rtas: Fix a potential race between CPU-Offline & Migration")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Merge our fixes branch into next, this brings in a number of commits
that fix bugs we don't want to hit in next, in particular the fix for
CVE-2019-12817.
One fix for a regression in my commit adding KUAP (Kernel User Access
Prevention) on Radix, which incorrectly touched the AMR in the early machine
check handler.
Thanks to:
Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=I22i
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.2-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a regression in my commit adding KUAP (Kernel User Access
Prevention) on Radix, which incorrectly touched the AMR in the early
machine check handler.
Thanks to Nicholas Piggin"
* tag 'powerpc-5.2-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/exception: Fix machine check early corrupting AMR
The early machine check runs in real mode, so locking is unnecessary.
Worse, the windup does not restore AMR, so this can result in a false
KUAP fault after a recoverable machine check hits inside a user copy
operation.
Fix this similarly to HMI by just avoiding the kuap lock in the
early machine check handler (it will be set by the late handler that
runs in virtual mode if that runs). If the virtual mode handler is
reached, it will lock and restore the AMR.
Fixes: 890274c2dc ("powerpc/64s: Implement KUAP for Radix MMU")
Cc: Russell Currey <ruscur@russell.cc>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The return value is fixed. Remove it and amend the callers.
[ tglx: Fixup arm/bL_switcher and powerpc/rtas ]
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20190613064813.8102-2-namit@vmware.com
Seven fixes, all for bugs introduced this cycle.
The commit to add KASAN support broke booting on 32-bit SMP machines, due to a
refactoring that moved some setup out of the secondary CPU path.
A fix for another 32-bit SMP bug introduced by the fast syscall entry
implementation for 32-bit BOOKE. And a build fix for the same commit.
Our change to allow the DAWR to be force enabled on Power9 introduced a bug in
KVM, where we clobber r3 leading to a host crash.
The same commit also exposed a previously unreachable bug in the nested KVM
handling of DAWR, which could lead to an oops in a nested host.
One of the DMA reworks broke the b43legacy WiFi driver on some people's
powermacs, fix it by enabling a 30-bit ZONE_DMA on 32-bit.
A fix for TLB flushing in KVM introduced a new bug, as it neglected to also
flush the ERAT, this could lead to memory corruption in the guest.
Thanks to:
Aaro Koskinen, Christoph Hellwig, Christophe Leroy, Larry Finger, Michael
Neuling, Suraj Jitindar Singh.
-----BEGIN PGP SIGNATURE-----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=Ju1y
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"This is a frustratingly large batch at rc5. Some of these were sent
earlier but were missed by me due to being distracted by other things,
and some took a while to track down due to needing manual bisection on
old hardware. But still we clearly need to improve our testing of KVM,
and of 32-bit, so that we catch these earlier.
Summary: seven fixes, all for bugs introduced this cycle.
- The commit to add KASAN support broke booting on 32-bit SMP
machines, due to a refactoring that moved some setup out of the
secondary CPU path.
- A fix for another 32-bit SMP bug introduced by the fast syscall
entry implementation for 32-bit BOOKE. And a build fix for the same
commit.
- Our change to allow the DAWR to be force enabled on Power9
introduced a bug in KVM, where we clobber r3 leading to a host
crash.
- The same commit also exposed a previously unreachable bug in the
nested KVM handling of DAWR, which could lead to an oops in a
nested host.
- One of the DMA reworks broke the b43legacy WiFi driver on some
people's powermacs, fix it by enabling a 30-bit ZONE_DMA on 32-bit.
- A fix for TLB flushing in KVM introduced a new bug, as it neglected
to also flush the ERAT, this could lead to memory corruption in the
guest.
Thanks to: Aaro Koskinen, Christoph Hellwig, Christophe Leroy, Larry
Finger, Michael Neuling, Suraj Jitindar Singh"
* tag 'powerpc-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries
powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac
KVM: PPC: Book3S HV: Only write DAWR[X] when handling h_set_dawr in real mode
KVM: PPC: Book3S HV: Fix r3 corruption in h_set_dabr()
powerpc/32: fix build failure on book3e with KVM
powerpc/booke: fix fast syscall entry on SMP
powerpc/32s: fix initial setup of segment registers on secondary CPU
When the firmware does PCI BAR resource allocation, it passes the assigned
addresses and flags (prefetch/64bit/...) via the "reg" property of
a PCI device device tree node so the kernel does not need to do
resource allocation.
The flags are stored in resource::flags - the lower byte stores
PCI_BASE_ADDRESS_SPACE/etc bits and the other bytes are IORESOURCE_IO/etc.
Some flags from PCI_BASE_ADDRESS_xxx and IORESOURCE_xxx are duplicated,
such as PCI_BASE_ADDRESS_MEM_PREFETCH/PCI_BASE_ADDRESS_MEM_TYPE_64/etc.
When parsing the "reg" property, we copy the prefetch flag but we skip
on PCI_BASE_ADDRESS_MEM_TYPE_64 which leaves the flags out of sync.
The missing IORESOURCE_MEM_64 flag comes into play under 2 conditions:
1. we remove PCI_PROBE_ONLY for pseries (by hacking pSeries_setup_arch()
or by passing "/chosen/linux,pci-probe-only");
2. we request resource alignment (by passing pci=resource_alignment=
via the kernel cmd line to request PAGE_SIZE alignment or defining
ppc_md.pcibios_default_alignment which returns anything but 0). Note that
the alignment requests are ignored if PCI_PROBE_ONLY is enabled.
With 1) and 2), the generic PCI code in the kernel unconditionally
decides to:
- reassign the BARs in pci_specified_resource_alignment() (works fine)
- write new BARs to the device - this fails for 64bit BARs as the generic
code looks at IORESOURCE_MEM_64 (not set) and writes only lower 32bits
of the BAR and leaves the upper 32bit unmodified which breaks BAR mapping
in the hypervisor.
This fixes the issue by copying the flag. This is useful if we want to
enforce certain BAR alignment per platform as handling subpage sized BARs
is proven to cause problems with hotplug (SLOF already aligns BARs to 64k).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Shawn Anastasio <shawn@anastas.io>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Based on 1 normalized pattern(s):
gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 58 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081207.556988620@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 2 normalized pattern(s):
this source code is licensed under the gnu general public license
version 2 see the file copying for more details
this source code is licensed under general public license version 2
see
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 52 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.449021192@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
powerpc hardware triggers watchpoint before executing the instruction.
To make trigger-after-execute behavior, kernel emulates the
instruction. If the instruction is 'load something into non-volatile
register', exception handler should restore emulated register state
while returning back, otherwise there will be register state
corruption. eg, adding a watchpoint on a list can corrput the list:
# cat /proc/kallsyms | grep kthread_create_list
c00000000121c8b8 d kthread_create_list
Add watchpoint on kthread_create_list->prev:
# perf record -e mem:0xc00000000121c8c0
Run some workload such that new kthread gets invoked. eg, I just
logged out from console:
list_add corruption. next->prev should be prev (c000000001214e00), \
but was c00000000121c8b8. (next=c00000000121c8b8).
WARNING: CPU: 59 PID: 309 at lib/list_debug.c:25 __list_add_valid+0xb4/0xc0
CPU: 59 PID: 309 Comm: kworker/59:0 Kdump: loaded Not tainted 5.1.0-rc7+ #69
...
NIP __list_add_valid+0xb4/0xc0
LR __list_add_valid+0xb0/0xc0
Call Trace:
__list_add_valid+0xb0/0xc0 (unreliable)
__kthread_create_on_node+0xe0/0x260
kthread_create_on_node+0x34/0x50
create_worker+0xe8/0x260
worker_thread+0x444/0x560
kthread+0x160/0x1a0
ret_from_kernel_thread+0x5c/0x70
List corruption happened because it uses 'load into non-volatile
register' instruction:
Snippet from __kthread_create_on_node:
c000000000136be8: addis r29,r2,-19
c000000000136bec: ld r29,31424(r29)
if (!__list_add_valid(new, prev, next))
c000000000136bf0: mr r3,r30
c000000000136bf4: mr r5,r28
c000000000136bf8: mr r4,r29
c000000000136bfc: bl c00000000059a2f8 <__list_add_valid+0x8>
Register state from WARN_ON():
GPR00: c00000000059a3a0 c000007ff23afb50 c000000001344e00 0000000000000075
GPR04: 0000000000000000 0000000000000000 0000001852af8bc1 0000000000000000
GPR08: 0000000000000001 0000000000000007 0000000000000006 00000000000004aa
GPR12: 0000000000000000 c000007ffffeb080 c000000000137038 c000005ff62aaa00
GPR16: 0000000000000000 0000000000000000 c000007fffbe7600 c000007fffbe7370
GPR20: c000007fffbe7320 c000007fffbe7300 c000000001373a00 0000000000000000
GPR24: fffffffffffffef7 c00000000012e320 c000007ff23afcb0 c000000000cb8628
GPR28: c00000000121c8b8 c000000001214e00 c000007fef5b17e8 c000007fef5b17c0
Watchpoint hit at 0xc000000000136bec.
addis r29,r2,-19
=> r29 = 0xc000000001344e00 + (-19 << 16)
=> r29 = 0xc000000001214e00
ld r29,31424(r29)
=> r29 = *(0xc000000001214e00 + 31424)
=> r29 = *(0xc00000000121c8c0)
0xc00000000121c8c0 is where we placed a watchpoint and thus this
instruction was emulated by emulate_step. But because handle_dabr_fault
did not restore emulated register state, r29 still contains stale
value in above register state.
Fixes: 5aae8a5370 ("powerpc, hw_breakpoints: Implement hw_breakpoints for 64-bit server processors")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: stable@vger.kernel.org # 2.6.36+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Previously, only IBAT1 and IBAT2 were used to map kernel linear mem.
Since commit 63b2bc6195 ("powerpc/mm/32s: Use BATs for
STRICT_KERNEL_RWX"), we may have all 8 BATs used for mapping
kernel text. But the suspend/restore functions only save/restore
BATs 0 to 3, and clears BATs 4 to 7.
Make suspend and restore functions respectively save and reload
the 8 BATs on CPUs having MMU_FTR_USE_HIGH_BATS feature.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
One fix for a regression introduced by our 32-bit KASAN support, which broke
booting on machines with "bootx" early debugging enabled.
A fix for a bug which broke kexec on 32-bit, introduced by changes to the 32-bit
STRICT_KERNEL_RWX support in v5.1.
Finally two fixes going to stable for our THP split/collapse handling,
discovered by Nick. The first fixes random crashes and/or corruption in guests
under sufficient load.
Thanks to:
Nicholas Piggin, Christophe Leroy, Aaro Koskinen, Mathieu Malaterre.
-----BEGIN PGP SIGNATURE-----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=MXJI
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix for a regression introduced by our 32-bit KASAN support, which
broke booting on machines with "bootx" early debugging enabled.
A fix for a bug which broke kexec on 32-bit, introduced by changes to
the 32-bit STRICT_KERNEL_RWX support in v5.1.
Finally two fixes going to stable for our THP split/collapse handling,
discovered by Nick. The first fixes random crashes and/or corruption
in guests under sufficient load.
Thanks to: Nicholas Piggin, Christophe Leroy, Aaro Koskinen, Mathieu
Malaterre"
* tag 'powerpc-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32s: fix booting with CONFIG_PPC_EARLY_DEBUG_BOOTX
powerpc/64s: __find_linux_pte() synchronization vs pmdp_invalidate()
powerpc/64s: Fix THP PMD collapse serialisation
powerpc: Fix kexec failure on book3s/32
Build failure was introduced by the commit identified below,
due to missed macro expension leading to wrong called function's name.
arch/powerpc/kernel/head_fsl_booke.o: In function `SystemCall':
arch/powerpc/kernel/head_fsl_booke.S:416: undefined reference to `kvmppc_handler_BOOKE_INTERRUPT_SYSCALL_SPRN_SRR1'
Makefile:1052: recipe for target 'vmlinux' failed
The called function should be kvmppc_handler_8_0x01B(). This patch fixes it.
Reported-by: Paul Mackerras <paulus@ozlabs.org>
Fixes: 1a4b739bbb ("powerpc/32: implement fast entry for syscalls on BOOKE")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Otherwise, the following warning is encountered:
WARNING: vmlinux.o(.text+0x3dc6): Section mismatch in reference from the variable start_here_multiplatform to the function .init.text:.early_setup()
The function start_here_multiplatform() references
the function __init .early_setup().
This is often because start_here_multiplatform lacks a __init
annotation or the annotation of .early_setup is wrong.
Fixes: 56c46bba9b ("powerpc/64: Fix booting large kernels with STRICT_KERNEL_RWX")
Cc: Russell Currey <ruscur@russell.cc>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use r10 instead of r9 to calculate CPU offset as r9 contains
the value from SRR1 which is used later.
Fixes: 1a4b739bbb ("powerpc/32: implement fast entry for syscalls on BOOKE")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The patch referenced below moved the loading of segment registers
out of load_up_mmu() in order to do it earlier in the boot sequence.
However, the secondary CPU still needs it to be done when loading up
the MMU.
Reported-by: Erhard F. <erhard_f@mailbox.org>
Fixes: 215b823707 ("powerpc/32s: set up an early static hash table for KASAN")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Allow external callers to force the cacheinfo code to release all its
references to cache nodes, e.g. before processing device tree updates
post-migration, and to rebuild the hierarchy afterward.
CPU online/offline must be blocked by callers; enforce this.
Fixes: 410bccf978 ("powerpc/pseries: Partition migration in the kernel")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The declaration for pfn_is_nosave is only available in
kernel/power/power.h. Since this function can be override in arch,
expose it globally. Having a prototype will make sure to avoid warning
(sometime treated as error with W=1) such as:
arch/powerpc/kernel/suspend.c:18:5: error: no previous prototype for 'pfn_is_nosave' [-Werror=missing-prototypes]
This moves the declaration into a globally visible header file and add
missing include to avoid a warning on powerpc.
Also remove the duplicated prototypes since not required anymore.
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When booting through OF, setup_disp_bat() does nothing because
disp_BAT are not set. By change, it used to work because BOOTX
buffer is mapped 1:1 at address 0x81000000 by the bootloader, and
btext_setup_display() sets virt addr same as phys addr.
But since commit 215b823707 ("powerpc/32s: set up an early static
hash table for KASAN."), a temporary page table overrides the
bootloader mapping.
This 0x81000000 is also problematic with the newly implemented
Kernel Userspace Access Protection (KUAP) because it is within user
address space.
This patch fixes those issues by properly setting disp_BAT through
a call to btext_prepare_BAT(), allowing setup_disp_bat() to
properly setup BAT3 for early bootx screen buffer access.
Reported-by: Mathieu Malaterre <malat@debian.org>
Fixes: 215b823707 ("powerpc/32s: set up an early static hash table for KASAN.")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In the old days, _PAGE_EXEC didn't exist on 6xx aka book3s/32.
Therefore, allthough __mapin_ram_chunk() was already mapping kernel
text with PAGE_KERNEL_TEXT and the rest with PAGE_KERNEL, the entire
memory was executable. Part of the memory (first 512kbytes) was
mapped with BATs instead of page table, but it was also entirely
mapped as executable.
In commit 385e89d5b2 ("powerpc/mm: add exec protection on
powerpc 603"), we started adding exec protection to some 6xx, namely
the 603, for pages mapped via pagetables.
Then, in commit 63b2bc6195 ("powerpc/mm/32s: Use BATs for
STRICT_KERNEL_RWX"), the exec protection was extended to BAT mapped
memory, so that really only the kernel text could be executed.
The problem here is that kexec is based on copying some code into
upper part of memory then executing it from there in order to install
a fresh new kernel at its definitive location.
However, the code is position independant and first part of it is
just there to deactivate the MMU and jump to the second part. So it
is possible to run this first part inplace instead of running the
copy. Once the MMU is off, there is no protection anymore and the
second part of the code will just run as before.
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Fixes: 63b2bc6195 ("powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
While the TIF_SYSCALL_EMU is set in ptrace_resume independent of any
architecture, currently only powerpc and x86 unset the TIF_SYSCALL_EMU
flag in ptrace_disable which gets called from ptrace_detach.
Let's move the clearing of TIF_SYSCALL_EMU flag to __ptrace_unlink
which gets executed from ptrace_detach and also keep it along with
or close to clearing of TIF_SYSCALL_TRACE.
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Based on 1 normalized pattern(s):
distribute under gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 8 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.475576622@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 59 temple place suite 330 boston ma 02111
1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 136 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license this program
is distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 100 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.918357685@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation 51 franklin street fifth floor boston ma 02110
1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 67 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141333.953658117@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A minor fix to our IMC PMU code to print a less confusing error message when the
driver can't initialise properly.
A fix for a bug where a user requesting an unsupported branch sampling filter
can corrupt PMU state, preventing the PMU from counting properly.
And finally a fix for a bug in our support for kexec_file_load(), which
prevented loading a kernel and initramfs. Most versions of kexec don't yet use
kexec_file_load().
Thanks to:
Anju T Sudhakar, Dave Young, Madhavan Srinivasan, Ravi Bangoria, Thiago Jung
Bauermann.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJc86afAAoJEFHr6jzI4aWAIC8P/R/1Y8ro94tmu58MvqNmG80F
Rc/+/1dY023X/itMHikSzPzs1UnQ1sjSKOOk3WOJcgVBE6Ks9Q7peeWD6wnSwYUq
PwvXAZNmsD0Bgh9Oazj7M4dMSZHq7zJzQ8WzopltVueKgx941BLwYPRZG5zFXfcV
k2Zaln87wfOuyfl/gQyWuG2ikziHJl9EvS3IIFejAnnogkFMti/FAe5bYXP3IT4W
c4whLQJMNLeaeA7zeFBUvotWCZVfCq+Li9QTKWYJIPIZqN3kSBP3wHuUC8wEFuXa
32+qu7RW5NfbuJERtCJYXqjO9C9A/QgOAm2n0LF2vBzo5CwBIqiR69PRuVzzUekU
NhYsHbbwviRl1By7pxUCNm48TW+3utm903etEp+PPV3FYdG+E2hlhs8NoUEdiN5X
PWzEMqUqneN6+HnwpEeeiDQef19XTaGr3PUd8CtJYJQ4rSeyvnBASjGKfVuBW6FL
85aCwsmAYdapJOyhK5OSaDEWwMnpLBClJKqNrdH7y9fFm2lFHSJSNxHERBtSQcfx
Ra+F7M0tyPRJFmVfXiX8u2ZYvYBLUIYUV1+mJHokEFOR9tW+Oy1lV3UMlXzWZXqb
CY3qpCk0ix1rLjv8VpDoVQE2LkMhhUGqsgymSFueIwsrQhfhb/ymiVmaEH202tTM
DyvBWmVuI9vyqR3Vt9GQ
=ilhV
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A minor fix to our IMC PMU code to print a less confusing error
message when the driver can't initialise properly.
A fix for a bug where a user requesting an unsupported branch sampling
filter can corrupt PMU state, preventing the PMU from counting
properly.
And finally a fix for a bug in our support for kexec_file_load(),
which prevented loading a kernel and initramfs. Most versions of kexec
don't yet use kexec_file_load().
Thanks to: Anju T Sudhakar, Dave Young, Madhavan Srinivasan, Ravi
Bangoria, Thiago Jung Bauermann"
* tag 'powerpc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kexec: Fix loading of kernel + initramfs with kexec_file_load()
powerpc/perf: Fix MMCRA corruption by bhrb_filter
powerpc/powernv: Return for invalid IMC domain
On POWER9, if the hypervisor supports XIVE exploitation mode, the
guest OS will unconditionally requests for the XIVE interrupt mode
even if XIVE was deactivated with the kernel command line xive=off.
Later on, when the spapr XIVE init code handles xive=off, it disables
XIVE and tries to fall back on the legacy mode XICS.
This discrepency causes a kernel panic because the hypervisor is
configured to provide the XIVE interrupt mode to the guest :
kernel BUG at arch/powerpc/sysdev/xics/xics-common.c:135!
...
NIP xics_smp_probe+0x38/0x98
LR xics_smp_probe+0x2c/0x98
Call Trace:
xics_smp_probe+0x2c/0x98 (unreliable)
pSeries_smp_probe+0x40/0xa0
smp_prepare_cpus+0x62c/0x6ec
kernel_init_freeable+0x148/0x448
kernel_init+0x2c/0x148
ret_from_kernel_thread+0x5c/0x68
Look for xive=off during prom_init and don't ask for XIVE in this
case. One exception though: if the host only supports XIVE, we still
want to boot so we ignore xive=off.
Similarly, have the spapr XIVE init code to looking at the interrupt
mode negotiated during CAS, and ignore xive=off if the hypervisor only
supports XIVE.
Fixes: eac1e731b5 ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.20
Reported-by: Pavithra R. Prakash <pavrampu@in.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In commit eab00a208e ("powerpc: Move `path` variable inside
DEBUG_PROM") DEBUG_PROM sentinels were added to silence a warning
(treated as error with W=1):
arch/powerpc/kernel/prom_init.c:1388:8: error: variable ‘path’ set but not used [-Werror=unused-but-set-variable]
Rework the original patch and simplify the code, by removing the
variable ‘path’ completely. Fix line over 90 characters.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Based on 1 normalized pattern(s):
licensed under gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 99 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170027.163048684@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As synchronous exceptions really only make sense against the current
task (otherwise how are you synchronous) remove the task parameter
from from force_sig_fault to make it explicit that is what is going
on.
The two known exceptions that deliver a synchronous exception to a
stopped ptraced task have already been changed to
force_sig_fault_to_task.
The callers have been changed with the following emacs regular expression
(with obvious variations on the architectures that take more arguments)
to avoid typos:
force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)]
->
force_sig_fault(\1,\2,\3)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
All of the remaining callers pass current into force_sig so
remove the task parameter to make this obvious and to make
misuse more difficult in the future.
This also makes it clear force_sig passes current into force_sig_info.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
675 mass ave cambridge ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 441 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b6664ba42f ("s390, kexec_file: drop arch_kexec_mem_walk()")
changed kexec_add_buffer() to skip searching for a memory location if
kexec_buf.mem is already set, and use the address that is there.
In powerpc code we reuse a kexec_buf variable for loading both the
kernel and the initramfs by resetting some of the fields between those
uses, but not mem. This causes kexec_add_buffer() to try to load the
kernel at the same address where initramfs will be loaded, which is
naturally rejected:
# kexec -s -l --initrd initramfs vmlinuz
kexec_file_load failed: Invalid argument
Setting the mem field before every call to kexec_add_buffer() fixes
this regression.
Fixes: b6664ba42f ("s390, kexec_file: drop arch_kexec_mem_walk()")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge yet more updates from Andrew Morton:
"A few final bits:
- large changes to vmalloc, yielding large performance benefits
- tweak the console-flush-on-panic code
- a few fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
panic: add an option to replay all the printk message in buffer
initramfs: don't free a non-existent initrd
fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount
mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock
mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro
mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro
mm/vmalloc.c: keep track of free blocks for vmap allocation
One fix going back to stable, for a bug on 32-bit introduced when we added
support for THREAD_INFO_IN_TASK.
A fix for a typo in a recent rework of our hugetlb code that leads to crashes on
64-bit when using hugetlbfs with a 4K PAGE_SIZE.
Two fixes for our recent rework of the address layout on 64-bit hash CPUs, both
only triggered when userspace tries to access addresses outside the user or
kernel address ranges.
Finally a fix for a recently introduced double free in an error path in our
cacheinfo code.
Thanks to:
Aneesh Kumar K.V, Christophe Leroy, Sachin Sant, Tobin C. Harding.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJc3+WRAAoJEFHr6jzI4aWAlN4QAIP7UnQUApYzQX8YrMJEiip7
1Jtez373pgDEX21McmaznyYRy04gtLWVRV0D5vRsTCG5RHBOVt2KPXe0PrzyjJws
/AxS9aRuMgM+VkLkD9c6DzWsuBLP8kJMfuTbmY7+C0tByQQT9Xfp+K7/gC5kGlK4
igyTGZvALlEVilsjTQO/FhADWisYIHM+y2/e0ocxLlK5F+TxdJKpESyUzjMOT78i
SmAn1qufZedV7ZH91VmvLm8f8MSqg+t1NTwpAnXuS58z2eSNisRhUcP43K4XdAez
QTGODTgUGGzLsbnIq8KJB/X4YVLwtTR2UM3p6ubTwlDuVkBfrFPUHowywDmxoPHZ
Kh6KWlRFAL49sGmYMJpfkaEiyN+J+VLN2HMdNLW2HgnROzDSOXCXcjuAuBE9nAKe
kvMV7Zwb4mQ0j0QUxHuugbBRzUpAcDg+PNZKKb9P/jIMWlMhGyb9fjGxC1yJfDtB
Kq03zJ+0lzvDCr1XbcDhSv4Fu6Dxxfi7GX9BXlzHTzsGFwZKICj9sLXDXXjFh4h8
CDNAeWtol1WE2xj315LL6WTlONUMQJ3wDAzd5VJw7SewadDzpK57vuwba88IN9hd
2PmH7FF8VyrksKmqt19ZsF0X7n7JL3+xbOcV9OT0r0DjkkM1fC6zo+JT6YYIER6A
FE+pFQRQJndKRzHqvyBJ
=2265
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One fix going back to stable, for a bug on 32-bit introduced when we
added support for THREAD_INFO_IN_TASK.
A fix for a typo in a recent rework of our hugetlb code that leads to
crashes on 64-bit when using hugetlbfs with a 4K PAGE_SIZE.
Two fixes for our recent rework of the address layout on 64-bit hash
CPUs, both only triggered when userspace tries to access addresses
outside the user or kernel address ranges.
Finally a fix for a recently introduced double free in an error path
in our cacheinfo code.
Thanks to: Aneesh Kumar K.V, Christophe Leroy, Sachin Sant, Tobin C.
Harding"
* tag 'powerpc-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/cacheinfo: Remove double free
powerpc/mm/hash: Fix get_region_id() for invalid addresses
powerpc/mm: Drop VM_BUG_ON in get_region_id()
powerpc/mm: Fix crashes with hugepages & 4K pages
powerpc/32s: fix flush_hash_pages() on SMP
Currently on panic, kernel will lower the loglevel and print out pending
printk msg only with console_flush_on_panic().
Add an option for users to configure the "panic_print" to replay all
dmesg in buffer, some of which they may have never seen due to the
loglevel setting, which will help panic debugging .
[feng.tang@intel.com: keep the original console_flush_on_panic() inside panic()]
Link: http://lkml.kernel.org/r/1556199137-14163-1-git-send-email-feng.tang@intel.com
[feng.tang@intel.com: use logbuf lock to protect the console log index]
Link: http://lkml.kernel.org/r/1556269868-22654-1-git-send-email-feng.tang@intel.com
Link: http://lkml.kernel.org/r/1556095872-36838-1-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull more vfs mount updates from Al Viro:
"Propagation of new syscalls to other architectures + cosmetic change
from Christian (fscontext didn't follow the convention for anon inode
names)"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
uapi: Wire up the mount API syscalls on non-x86 arches [ver #2]
uapi, x86: Fix the syscall numbering of the mount API syscalls [ver #2]
uapi, fsopen: use square brackets around "fscontext" [ver #2]
kfree() after kobject_put(). Who ever wrote this was on crack.
Fixes: 7e8039795a ("powerpc/cacheinfo: Fix kobject memleak")
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Wire up the mount API syscalls on non-x86 arches.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
CONFIG_DEBUG_KERNEL should not impact code generation. Use the newly
defined CONFIG_DEBUG_MISC instead to keep the current code.
Link: http://lkml.kernel.org/r/20190413224438.10802-3-okaya@kernel.org
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Florian Westphal <fw@strlen.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This prepares to move CONFIG_OPTIMIZE_INLINING from x86 to a common
place. We need to eliminate potential issues beforehand.
If it is enabled for powerpc, the following modpost warnings are
reported:
WARNING: vmlinux.o(.text.unlikely+0x20): Section mismatch in reference from the function .prom_getprop() to the function .init.text:.call_prom()
The function .prom_getprop() references the function __init .call_prom().
This is often because .prom_getprop lacks a __init annotation or the annotation of .call_prom is wrong.
WARNING: vmlinux.o(.text.unlikely+0x3c): Section mismatch in reference from the function .prom_getproplen() to the function .init.text:.call_prom()
The function .prom_getproplen() references the function __init .call_prom().
This is often because .prom_getproplen lacks a __init annotation or the annotation of .call_prom is wrong.
Link: http://lkml.kernel.org/r/20190423034959.13525-9-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Highlights:
- Support for Kernel Userspace Access/Execution Prevention (like
SMAP/SMEP/PAN/PXN) on some 64-bit and 32-bit CPUs. This prevents the kernel
from accidentally accessing userspace outside copy_to/from_user(), or
ever executing userspace.
- KASAN support on 32-bit.
- Rework of where we map the kernel, vmalloc, etc. on 64-bit hash to use the
same address ranges we use with the Radix MMU.
- A rewrite into C of large parts of our idle handling code for 64-bit Book3S
(ie. power8 & power9).
- A fast path entry for syscalls on 32-bit CPUs, for a 12-17% speedup in the
null_syscall benchmark.
- On 64-bit bare metal we have support for recovering from errors with the time
base (our clocksource), however if that fails currently we hang in __delay()
and never crash. We now have support for detecting that case and short
circuiting __delay() so we at least panic() and reboot.
- Add support for optionally enabling the DAWR on Power9, which had to be
disabled by default due to a hardware erratum. This has the effect of
enabling hardware breakpoints for GDB, the downside is a badly behaved
program could crash the machine by pointing the DAWR at cache inhibited
memory. This is opt-in obviously.
- xmon, our crash handler, gets support for a read only mode where operations
that could change memory or otherwise disturb the system are disabled.
Plus many clean-ups, reworks and minor fixes etc.
Thanks to:
Christophe Leroy, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Andrew
Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Ben Hutchings,
Bo YU, Breno Leitao, Cédric Le Goater, Christopher M. Riedl, Christoph
Hellwig, Colin Ian King, David Gibson, Ganesh Goudar, Gautham R. Shenoy,
George Spelvin, Greg Kroah-Hartman, Greg Kurz, Horia Geantă, Jagadeesh
Pagadala, Joel Stanley, Joe Perches, Julia Lawall, Laurentiu Tudor, Laurent
Vivier, Lukas Bulwahn, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu
Malaterre, Michael Neuling, Mukesh Ojha, Nathan Fontenot, Nathan Lynch,
Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Peng Hao, Qian Cai, Ravi
Bangoria, Rick Lindsley, Russell Currey, Sachin Sant, Stewart Smith, Sukadev
Bhattiprolu, Thomas Huth, Tobin C. Harding, Tyrel Datwyler, Valentin
Schneider, Wei Yongjun, Wen Yang, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=cUkd
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.2-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Slightly delayed due to the issue with printk() calling
probe_kernel_read() interacting with our new user access prevention
stuff, but all fixed now.
The only out-of-area changes are the addition of a cpuhp_state, small
additions to Documentation and MAINTAINERS updates.
Highlights:
- Support for Kernel Userspace Access/Execution Prevention (like
SMAP/SMEP/PAN/PXN) on some 64-bit and 32-bit CPUs. This prevents
the kernel from accidentally accessing userspace outside
copy_to/from_user(), or ever executing userspace.
- KASAN support on 32-bit.
- Rework of where we map the kernel, vmalloc, etc. on 64-bit hash to
use the same address ranges we use with the Radix MMU.
- A rewrite into C of large parts of our idle handling code for
64-bit Book3S (ie. power8 & power9).
- A fast path entry for syscalls on 32-bit CPUs, for a 12-17% speedup
in the null_syscall benchmark.
- On 64-bit bare metal we have support for recovering from errors
with the time base (our clocksource), however if that fails
currently we hang in __delay() and never crash. We now have support
for detecting that case and short circuiting __delay() so we at
least panic() and reboot.
- Add support for optionally enabling the DAWR on Power9, which had
to be disabled by default due to a hardware erratum. This has the
effect of enabling hardware breakpoints for GDB, the downside is a
badly behaved program could crash the machine by pointing the DAWR
at cache inhibited memory. This is opt-in obviously.
- xmon, our crash handler, gets support for a read only mode where
operations that could change memory or otherwise disturb the system
are disabled.
Plus many clean-ups, reworks and minor fixes etc.
Thanks to: Christophe Leroy, Akshay Adiga, Alastair D'Silva, Alexey
Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar,
Anton Blanchard, Ben Hutchings, Bo YU, Breno Leitao, Cédric Le Goater,
Christopher M. Riedl, Christoph Hellwig, Colin Ian King, David Gibson,
Ganesh Goudar, Gautham R. Shenoy, George Spelvin, Greg Kroah-Hartman,
Greg Kurz, Horia Geantă, Jagadeesh Pagadala, Joel Stanley, Joe
Perches, Julia Lawall, Laurentiu Tudor, Laurent Vivier, Lukas Bulwahn,
Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael
Neuling, Mukesh Ojha, Nathan Fontenot, Nathan Lynch, Nicholas Piggin,
Nick Desaulniers, Oliver O'Halloran, Peng Hao, Qian Cai, Ravi
Bangoria, Rick Lindsley, Russell Currey, Sachin Sant, Stewart Smith,
Sukadev Bhattiprolu, Thomas Huth, Tobin C. Harding, Tyrel Datwyler,
Valentin Schneider, Wei Yongjun, Wen Yang, YueHaibing"
* tag 'powerpc-5.2-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (205 commits)
powerpc/64s: Use early_mmu_has_feature() in set_kuap()
powerpc/book3s/64: check for NULL pointer in pgd_alloc()
powerpc/mm: Fix hugetlb page initialization
ocxl: Fix return value check in afu_ioctl()
powerpc/mm: fix section mismatch for setup_kup()
powerpc/mm: fix redundant inclusion of pgtable-frag.o in Makefile
powerpc/mm: Fix makefile for KASAN
powerpc/kasan: add missing/lost Makefile
selftests/powerpc: Add a signal fuzzer selftest
powerpc/booke64: set RI in default MSR
ocxl: Provide global MMIO accessors for external drivers
ocxl: move event_fd handling to frontend
ocxl: afu_irq only deals with IRQ IDs, not offsets
ocxl: Allow external drivers to use OpenCAPI contexts
ocxl: Create a clear delineation between ocxl backend & frontend
ocxl: Don't pass pci_dev around
ocxl: Split pci.c
ocxl: Remove some unused exported symbols
ocxl: Remove superfluous 'extern' from headers
ocxl: read_pasid never returns an error, so make it void
...
Pull speculation mitigation update from Ingo Molnar:
"This adds the "mitigations=" bootline option, which offers a
cross-arch set of options that will work on x86, PowerPC and s390 that
will map to the arch specific option internally"
* 'core-speculation-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
s390/speculation: Support 'mitigations=' cmdline option
powerpc/speculation: Support 'mitigations=' cmdline option
x86/speculation: Support 'mitigations=' cmdline option
cpu/speculation: Add 'mitigations=' cmdline option
On TOD/TB errors timebase register stops/freezes until HMI error recovery
gets TOD/TB back into running state. On successful recovery, TB starts
running again and udelay() that relies on TB value continues to function
properly. But in case when HMI fails to recover from TOD/TB errors, the
TB register stay freezed. With TB not running the __delay() function
keeps looping and never return. If __delay() is called while in panic
path then system hangs and never reboots after panic.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since the enabling and disabling of IRQs within preempt_schedule_irq()
is contained in a need_resched() loop, we don't need the outer arch
code loop.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
[mpe: Rebase since CURRENT_THREAD_INFO() removal]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PROM_SCRATCH_SIZE is same as sizeof(prom_scratch)
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This can be helpful for debugging problems with the security feature
flags, especially on guests where the flags come from the hypervisor
via an hcall and so can't be observed in the device tree.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
"Reconciling" in terms of interrupt handling, is to bring the soft irq
mask state in to synch with the hardware, after an interrupt causes
MSR[EE] to be cleared (while the soft mask may be enabled, and hard
irqs not marked disabled).
General kernel code should not be called while unreconciled, because
local_irq_disable, etc. manipulations can cause surprising irq traces,
and it's fragile because the soft irq code does not really expect to
be called in this situation.
When exiting from an interrupt, MSR[EE] is cleared to prevent races,
but soft irq state is enabled for the returned-to context, so this is
now an unreconciled state. restore_math is called in this state, and
that can be ftraced, and the ftrace subsystem disables local irqs.
Mark restore_math and its callees as notrace. Restore a sanity check
in the soft irq code that had to be disabled for this case, by commit
4da1f79227 ("powerpc/64: Disable irq restore warning for now").
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch drops__irq_offset_value which has not been used since
commit 9c4cb82515 ("powerpc: Remove use of CONFIG_PPC_MERGE")
This removes a sparse warning.
Fixes: 9c4cb82515 ("powerpc: Remove use of CONFIG_PPC_MERGE")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Compared to ifdefs, IS_ENABLED() provide a cleaner code and allows
to detect compilation failure regardless of the selected options.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use cpu_has_feature() instead of opencoding
Use IS_ENABLED() instead of #ifdef for CONFIG_TAU_AVERAGE
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
CPU_FTR_ALTIVEC is only set when CONFIG_ALTIVEC is selected, so
the ifdef is unnecessary.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To avoid ifdefs, define a empty static inline mm_iommu_init() function
when CONFIG_SPAPR_TCE_IOMMU is not selected.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To avoid #ifdefs, define an static inline fadump_cleanup() function
when CONFIG_FADUMP is not selected
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
No need to add dummy frames when calling trace_hardirqs_on or
trace_hardirqs_off. GCC properly handles empty stacks.
In addition, powerpc doesn't set CONFIG_FRAME_POINTER, therefore
__builtin_return_address(1..) returns NULL at all time. So the
dummy frames are definitely unneeded here.
In the meantime, avoid reading memory for loading r1 with a value
we already know.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As syscalls are now handled via a fast entry path, syscall related
actions can be removed from the generic transfer_to_handler path.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch implements a fast entry for syscalls.
Syscalls don't have to preserve non volatile registers except LR.
This patch then implement a fast entry for syscalls, where
volatile registers get clobbered.
As this entry is dedicated to syscall it always sets MSR_EE
and warns in case MSR_EE was previously off
It also assumes that the call is always from user, system calls are
unexpected from kernel.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch implements a fast entry for syscalls.
Syscalls don't have to preserve non volatile registers except LR.
This patch then implement a fast entry for syscalls, where
volatile registers get clobbered.
As this entry is dedicated to syscall it always sets MSR_EE
and warns in case MSR_EE was previously off
It also assumes that the call is always from user, system calls are
unexpected from kernel.
The overall series improves null_syscall selftest by 12,5% on an 83xx
and by 17% on a 8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[text mostly copied from benh's RFC/WIP]
ppc32 are still doing something rather gothic and wrong on 32-bit
which we stopped doing on 64-bit a while ago.
We have that thing where some handlers "copy" the EE value from the
original stack frame into the new MSR before transferring to the
handler.
Thus for a number of exceptions, we enter the handlers with interrupts
enabled.
This is rather fishy, some of the stuff that handlers might do early
on such as irq_enter/exit or user_exit, context tracking, etc...
should be run with interrupts off afaik.
Generally our handlers know when to re-enable interrupts if needed.
The problem we were having is that we assumed these interrupts would
return with interrupts enabled. However that isn't the case.
Instead, this patch changes things so that we always enter exception
handlers with interrupts *off* with the notable exception of syscalls
which are special (and get a fast path).
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
EXC_XFER_TEMPLATE() is not called with COPY_EE anymore so
we can get rid of copyee parameters and related COPY_EE and NOCOPY
macros.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[splited out from benh RFC patch]
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
All exceptions handlers know when to reenable interrupts, so
it is safer to enter all of them with MSR_EE unset, except
for syscalls.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[splited out from benh RFC patch]
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
syscalls are expected to be entered with MSR_EE set. Lets
make it inconditional by forcing MSR_EE on syscalls.
This patch adds EXC_XFER_SYS for that.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[splited out from benh RFC patch]
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
SPEFloatingPointException() is the only exception handler which 'forgets' to
re-enable interrupts. This patch makes sure it does.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Refactor exception entry macros by using the ones defined in head_32.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch splits NORMAL_EXCEPTION_PROLOG in the same way as in
head_8xx.S and head_32.S and renames it EXCEPTION_PROLOG() as well
to match head_32.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Unlike said in the comment, r1 is not reused by the critical
exception handler, as it uses a dedicated critirq_ctx stack.
Decrementing r1 early is then unneeded.
Should the above be valid, the code is crap buggy anyway as
r1 gets some intermediate values that would jeopardise the
whole process (for instance after mfspr r1,SPRN_SPRG_THREAD)
Using SPRN_SPRG_SCRATCH2 to save r1 is then not needed, r11 can be
used instead. This avoids one mtspr and one mfspr and makes the
prolog closer to what's done on 6xx and 8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
6xx/8xx EXC_XFER_TEMPLATE() macro adds a i##n symbol which is
unused and can be removed.
40x and booke EXC_XFER_TEMPLATE() macros takes msr from the caller
while the 6xx/8xx version uses only MSR_KERNEL as msr value.
This patch modifies the 6xx/8xx version to make it similar to the
40x and booke versions.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As preparation for using head_32.h for head_40x.S, move
LOAD_MSR_KERNEL() there and use it to load r10 with MSR_KERNEL value.
In the mean time, this patch modifies it so that it takes into account
the size of the passed value to determine if 'li' can be used or if
'lis/ori' is needed instead of using the size of MSR_KERNEL. This is
done by using gas macro.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
EXCEPTION_PROLOG is similar in head_8xx.S and head_32.S
This patch creates head_32.h and moves EXCEPTION_PROLOG macro
into it. It also converts it from a GCC macro to a GAS macro
in order to ease refactorisation with 40x later, since
GAS macros allows the use of #ifdef/#else/#endif inside it.
And it also has the advantage of not requiring the uggly "; \"
at the end of each line.
This patch also moves EXCEPTION() and EXC_XFER_XXXX() macros which
are also similar while adding START_EXCEPTION() out of EXCEPTION().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reduce #ifdef mess by defining a helper to print
hash info at startup.
In the meantime, remove the display of hash table address
to reduce leak of non necessary information.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
KASAN requires early activation of hash table, before memblock()
functions are available.
This patch implements an early hash_table statically defined in
__initdata.
During early boot, a single page table is used.
For hash32, when doing the final init, one page table is allocated
for each PGD entry because of the _PAGE_HASHPTE flag which can't be
common to several virt pages. This is done after memblock get
available but before switching to the final hash table, otherwise
there are issues with TLB flushing due to the shared entries.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For KASAN, hash table handling will be activated early for
accessing to KASAN shadow areas.
In order to avoid any modification of the hash functions while
they are still used with the early hash table, the code patching
is moved out of MMU_init_hw() and put close to the big-bang switch
to the final hash table.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds KASAN support for PPC32. The following patch
will add an early activation of hash table for book3s. Until
then, a warning will be raised if trying to use KASAN on an
hash 6xx.
To support KASAN, this patch initialises that MMU mapings for
accessing to the KASAN shadow area defined in a previous patch.
An early mapping is set as soon as the kernel code has been
relocated at its definitive place.
Then the definitive mapping is set once paging is initialised.
For modules, the shadow area is allocated at module_alloc().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
All files containing functions run before kasan_early_init() is called
must have KASAN instrumentation disabled.
For those file, branch profiling also have to be disabled otherwise
each if () generates a call to ftrace_likely_update().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since commit 400c47d81c ("powerpc32: memset: only use dcbz once cache is
enabled"), memset() can be used before activation of the cache,
so no need to use memset_io() for zeroing the BSS.
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In kernel/cputable.c, explicitly use memcpy() instead of *y = *x;
This will allow GCC to replace it with __memcpy() when KASAN is
selected.
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When KASAN is active, the string functions in lib/ are doing the
KASAN checks. This is too early for prom_init.
This patch implements dedicated string functions for prom_init,
which will be compiled in with KASAN disabled.
Size of prom_init before the patch:
text data bss dec hex filename
12060 488 6960 19508 4c34 arch/powerpc/kernel/prom_init.o
Size of prom_init after the patch:
text data bss dec hex filename
12460 488 6960 19908 4dc4 arch/powerpc/kernel/prom_init.o
This increases the size of prom_init a bit, but as prom_init is
in __init section, it is freed after boot anyway.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch makes CONFIG_CMDLINE defined at all time. It avoids
having to enclose related code inside #ifdef CONFIG_CMDLINE
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
CONFIG_KASAN implements wrappers for memcpy() memmove() and memset()
Those wrappers are doing the verification then call respectively
__memcpy() __memmove() and __memset(). The arches are therefore
expected to rename their optimised functions that way.
For files on which KASAN is inhibited, #defines are used to allow
them to directly call optimised versions of the functions without
going through the KASAN wrappers.
See commit 393f203f5f ("x86_64: kasan: add interceptors for
memset/memmove/memcpy functions") for details.
Other string / mem functions do not (yet) have kasan wrappers,
we therefore have to fallback to the generic versions when
KASAN is active, otherwise KASAN checks will be skipped.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Fixups to keep selftests working]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In preparation of KASAN, move early_init() into a separate
file in order to allow deactivation of KASAN for that function.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
No need to have this in asm/page.h, move it into asm/hugetlb.h
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 67fda38f0d ("powerpc/mm: Move slb_addr_linit to
early_init_mmu") moved slb_addr_limit init out of setup_arch().
Commit 701101865f ("powerpc/mm: Reduce memory usage for mm_context_t
for radix") brought it back into setup_arch() by error.
This patch reverts that erroneous regress.
Fixes: 701101865f ("powerpc/mm: Reduce memory usage for mm_context_t for radix")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is a kernel crash that happens if rt_sigreturn() is called inside
a transactional block.
This crash happens if the kernel hits an in-kernel page fault when
accessing userspace memory, usually through copy_ckvsx_to_user(). A
major page fault calls might_sleep() function, which can cause a task
reschedule. A task reschedule (switch_to()) reclaim and recheckpoint
the TM states, but, in the signal return path, the checkpointed memory
was already reclaimed, thus the exception stack has MSR that points to
MSR[TS]=0.
When the code returns from might_sleep() and a task reschedule
happened, then this task is returned with the memory recheckpointed,
and CPU MSR[TS] = suspended.
This means that there is a side effect at might_sleep() if it is
called with CPU MSR[TS] = 0 and the task has regs->msr[TS] != 0.
This side effect can cause a TM bad thing, since at the exception
entrance, the stack saves MSR[TS]=0, and this is what will be used at
RFID, but, the processor has MSR[TS] = Suspended, and this transition
will be invalid and a TM Bad thing will be raised, causing the
following crash:
Unexpected TM Bad Thing exception at c00000000000e9ec (msr 0x8000000302a03031) tm_scratch=800000010280b033
cpu 0xc: Vector: 700 (Program Check) at [c00000003ff1fd70]
pc: c00000000000e9ec: fast_exception_return+0x100/0x1bc
lr: c000000000032948: handle_rt_signal64+0xb8/0xaf0
sp: c0000004263ebc40
msr: 8000000302a03031
current = 0xc000000415050300
paca = 0xc00000003ffc4080 irqmask: 0x03 irq_happened: 0x01
pid = 25006, comm = sigfuz
Linux version 5.0.0-rc1-00001-g3bd6e94bec12 (breno@debian) (gcc version 8.2.0 (Debian 8.2.0-3)) #899 SMP Mon Jan 7 11:30:07 EST 2019
WARNING: exception is not recoverable, can't continue
enter ? for help
[c0000004263ebc40] c000000000032948 handle_rt_signal64+0xb8/0xaf0 (unreliable)
[c0000004263ebd30] c000000000022780 do_notify_resume+0x2f0/0x430
[c0000004263ebe20] c00000000000e844 ret_from_except_lite+0x70/0x74
--- Exception: c00 (System Call) at 00007fffbaac400c
SP (7fffeca90f40) is in userspace
The solution for this problem is running the sigreturn code with
regs->msr[TS] disabled, thus, avoiding hitting the side effect above.
This does not seem to be a problem since regs->msr will be replaced by
the ucontext value, so, it is being flushed already. In this case, it
is flushed earlier.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Print more information about MCE error whether it is an hardware or
software error.
Some of the MCE errors can be easily categorized as hardware or
software errors e.g. UEs are due to hardware error, where as error
triggered due to invalid usage of tlbie is a pure software bug. But
not all the MCE errors can be easily categorize into either software
or hardware. There are errors like multihit errors which are usually
result of a software bug, but in some rare cases a hardware failure
can cause a multihit error. In past, we have seen case where after
replacing faulty chip, multihit errors stopped occurring. Same with
parity errors, which are usually due to faulty hardware but there are
chances where multihit can also cause an parity error. Such errors are
difficult to determine what really caused it. Hence this patch
classifies MCE errors into following four categorize:
1. Hardware error:
UE and Link timeout failure errors.
2. Probable hardware error (some chance of software cause)
SLB/ERAT/TLB Parity errors.
3. Software error
Invalid tlbie form.
4. Probable software error (some chance of hardware cause)
SLB/ERAT/TLB Multihit errors.
Sample output:
MCE: CPU80: machine check (Warning) Guest SLB Multihit DAR: 000001001b6e0320 [Recovered]
MCE: CPU80: PID: 24765 Comm: qemu-system-ppc Guest NIP: [00007fffa309dc60]
MCE: CPU80: Probable Software error (some chance of hardware cause)
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
