Commit Graph

284 Commits

Author SHA1 Message Date
Luis Henriques
6fd4e63483 ceph: allow object copies across different filesystems in the same cluster
OSDs are able to perform object copies across different pools.  Thus,
there's no need to prevent copy_file_range from doing remote copies if the
source and destination superblocks are different.  Only return -EXDEV if
they have different fsid (the cluster ID).

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16 12:06:25 +02:00
Jeff Layton
321fe13c93 ceph: add buffered/direct exclusionary locking for reads and writes
xfstest generic/451 intermittently fails. The test does O_DIRECT writes
to a file, and then reads back the result using buffered I/O, while
running a separate set of tasks that are also doing buffered reads.

The client will invalidate the cache prior to a direct write, but it's
easy for one of the other readers' replies to race in and reinstantiate
the invalidated range with stale data.

To fix this, we must to serialize direct I/O writes and buffered reads.
We could just sprinkle in some shared locks on the i_rwsem for reads,
and increase the exclusive footprint on the write side, but that would
cause O_DIRECT writes to end up serialized vs. other direct requests.

Instead, borrow the scheme used by nfs.ko. Buffered writes take the
i_rwsem exclusively, but buffered reads take a shared lock, allowing
them to run in parallel.

O_DIRECT requests also take a shared lock, but we need for them to not
run in parallel with buffered reads.  A flag on the ceph_inode_info is
used to indicate whether it's in direct or buffered I/O mode. When a
conflicting request is submitted, it will block until the inode can be
flipped to the necessary mode.

Link: https://tracker.ceph.com/issues/40985
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16 12:06:25 +02:00
Yan, Zheng
131d7eb4fa ceph: auto reconnect after blacklisted
Make client use osd reply and session message to infer if itself is
blacklisted. Client reconnect to cluster using new entity addr if it
is blacklisted. Auto reconnect is limited to once every 30 minutes.

Auto reconnect is disabled by default. It can be enabled/disabled by
recover_session=<no|clean> mount option. In 'clean' mode, client drops
any dirty data/metadata, invalidates page caches and invalidates all
writable file handles. After reconnect, file locks become stale because
MDS loses track of them. If an inode contains any stale file locks,
read/write on the indoe are not allowed until applications release all
stale file locks.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16 12:06:24 +02:00
Yan, Zheng
81f148a910 ceph: invalidate all write mode filp after reconnect
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16 12:06:24 +02:00
Yan, Zheng
5e3ded1bb6 ceph: pass filp to ceph_get_caps()
Also change several other functions' arguments, no logical changes.
This is preparetion for later patch that checks filp error.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16 12:06:24 +02:00
Yan, Zheng
f4b9786622 ceph: track and report error of async metadata operation
Use errseq_t to track and report errors of async metadata operations,
similar to how kernel handles errors during writeback.

If any dirty caps or any unsafe request gets dropped during session
eviction, record -EIO in corresponding inode's i_meta_err. The error
will be reported by subsequent fsync,

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16 12:06:23 +02:00
Jeff Layton
e1e4460202 ceph: allow copy_file_range when src and dst inode are same
There is no reason to prevent this. The OSD should be able to handle
this as long as the objects are different, and the existing code falls
back when the offset into the object is different.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-09-16 12:06:23 +02:00
Linus Torvalds
d9b9c89304 Lots of exciting things this time!
- support for rbd object-map and fast-diff features (myself).  This
   will speed up reads, discards and things like snap diffs on sparse
   images.
 
 - ceph.snap.btime vxattr to expose snapshot creation time (David
   Disseldorp).  This will be used to integrate with "Restore Previous
   Versions" feature added in Windows 7 for folks who reexport ceph
   through SMB.
 
 - security xattrs for ceph (Zheng Yan).  Only selinux is supported
   for now due to the limitations of ->dentry_init_security().
 
 - support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
   Layton).  This is actually a single feature bit which was missing
   because of the filesystem pieces.  With this in, the kernel client
   will finally be reported as "luminous" by "ceph features" -- it is
   still being reported as "jewel" even though all required Luminous
   features were implemented in 4.13.
 
 - stop NULL-terminating ceph vxattrs (Jeff Layton).  The convention
   with xattrs is to not terminate and this was causing inconsistencies
   with ceph-fuse.
 
 - change filesystem time granularity from 1 us to 1 ns, again fixing
   an inconsistency with ceph-fuse (Luis Henriques).
 
 On top of this there are some additional dentry name handling and cap
 flushing fixes from Zheng.  Finally, Jeff is formally taking over for
 Zheng as the filesystem maintainer.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl0u+X8THGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzi9byB/9fIxzoxtDMvixtJabuGSJRtlijDlWF
 GlO6yIWCXl/8v8easR2PCF75U/xv0+QFQmze8PVi8u4Xz589P247NnEuyEZ9n84i
 aCavARho6QLZPEL+B04NaqoHBl+ORKQTA6eKGhyKwRp/rn83z5Ubuw2tN7krHT3b
 kCY61FuTQGxNY2o/WKv/iLwINYr7H23hCf0WwyyKH1bp7OegiQ14Ebn1NtfS3sMx
 hS6h8Ya826vmUW0bCSS/9kzKYBCjksTig0HphUOHq6BoZJs++0b7GukIulRyuLfD
 J9Gr9HGPoDCVzdmFfpn2FSlxdmqfO9amUSagd0ftLQfFlPlrpoULi0GW
 =Bgxr
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "Lots of exciting things this time!

   - support for rbd object-map and fast-diff features (myself). This
     will speed up reads, discards and things like snap diffs on sparse
     images.

   - ceph.snap.btime vxattr to expose snapshot creation time (David
     Disseldorp). This will be used to integrate with "Restore Previous
     Versions" feature added in Windows 7 for folks who reexport ceph
     through SMB.

   - security xattrs for ceph (Zheng Yan). Only selinux is supported for
     now due to the limitations of ->dentry_init_security().

   - support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
     Layton). This is actually a single feature bit which was missing
     because of the filesystem pieces. With this in, the kernel client
     will finally be reported as "luminous" by "ceph features" -- it is
     still being reported as "jewel" even though all required Luminous
     features were implemented in 4.13.

   - stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
     with xattrs is to not terminate and this was causing
     inconsistencies with ceph-fuse.

   - change filesystem time granularity from 1 us to 1 ns, again fixing
     an inconsistency with ceph-fuse (Luis Henriques).

  On top of this there are some additional dentry name handling and cap
  flushing fixes from Zheng. Finally, Jeff is formally taking over for
  Zheng as the filesystem maintainer"

* tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client: (71 commits)
  ceph: fix end offset in truncate_inode_pages_range call
  ceph: use generic_delete_inode() for ->drop_inode
  ceph: use ceph_evict_inode to cleanup inode's resource
  ceph: initialize superblock s_time_gran to 1
  MAINTAINERS: take over for Zheng as CephFS kernel client maintainer
  rbd: setallochint only if object doesn't exist
  rbd: support for object-map and fast-diff
  rbd: call rbd_dev_mapping_set() from rbd_dev_image_probe()
  libceph: export osd_req_op_data() macro
  libceph: change ceph_osdc_call() to take page vector for response
  libceph: bump CEPH_MSG_MAX_DATA_LEN (again)
  rbd: new exclusive lock wait/wake code
  rbd: quiescing lock should wait for image requests
  rbd: lock should be quiesced on reacquire
  rbd: introduce copyup state machine
  rbd: rename rbd_obj_setup_*() to rbd_obj_init_*()
  rbd: move OSD request allocation into object request state machines
  rbd: factor out __rbd_osd_setup_discard_ops()
  rbd: factor out rbd_osd_setup_copyup()
  rbd: introduce obj_req->osd_reqs list
  ...
2019-07-18 11:05:25 -07:00
Luis Henriques
d31d07b97a ceph: fix end offset in truncate_inode_pages_range call
Commit e450f4d1a5 ("ceph: pass inclusive lend parameter to
filemap_write_and_wait_range()") fixed the end offset parameter used to
call filemap_write_and_wait_range and invalidate_inode_pages2_range.
Unfortunately it missed truncate_inode_pages_range, introducing a
regression that is easily detected by xfstest generic/130.

The problem is that when doing direct IO it is possible that an extra page
is truncated from the page cache when the end offset is page aligned.
This can cause data loss if that page hasn't been sync'ed to the OSDs.

While there, change code to use PAGE_ALIGN macro instead.

Cc: stable@vger.kernel.org
Fixes: e450f4d1a5 ("ceph: pass inclusive lend parameter to filemap_write_and_wait_range()")
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08 14:01:45 +02:00
Ilya Dryomov
94e8577188 libceph: rename r_unsafe_item to r_private_item
This list item remained from when we had safe and unsafe replies
(commit vs ack).  It has since become a private list item for use by
clients.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08 14:01:44 +02:00
Jeff Layton
5c30835690 ceph: increment change_attribute on local changes
We don't set SB_I_VERSION on ceph since we need to manage it ourselves,
so we must increment it whenever we update the file times.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08 14:01:44 +02:00
Yan, Zheng
ac6713ccb5 ceph: add selinux support
When creating new file/directory, use security_dentry_init_security() to
prepare selinux context for the new inode, then send openc/mkdir request
to MDS, together with selinux xattr.

security_dentry_init_security() only supports single security module and
only selinux has dentry_init_security hook. So only selinux is supported
for now. We can add support for other security modules once kernel has a
generic version of dentry_init_security()

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08 14:01:42 +02:00
Yan, Zheng
5c31e92dff ceph: rename struct ceph_acls_info to ceph_acl_sec_ctx
Also rename ceph_release_acls_info() to ceph_release_acl_sec_ctx().
And move their definitions to different files. This is preparation
for security label support.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08 14:01:42 +02:00
Amir Goldstein
5dae222a5f vfs: allow copy_file_range to copy across devices
We want to enable cross-filesystem copy_file_range functionality
where possible, so push the "same superblock only" checks down to
the individual filesystem callouts so they can make their own
decisions about cross-superblock copy offload and fallack to
generic_copy_file_range() for cross-superblock copy.

[Amir] We do not call ->remap_file_range() in case the files are not
on the same sb and do not call ->copy_file_range() in case the files
do not belong to the same filesystem driver.

This changes behavior of the copy_file_range(2) syscall, which will
now allow cross filesystem in-kernel copy.  CIFS already supports
cross-superblock copy, between two shares to the same server. This
functionality will now be available via the copy_file_range(2) syscall.

Cc: Steve French <stfrench@microsoft.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-06-09 10:06:20 -07:00
Dave Chinner
64bf5ff58d vfs: no fallback for ->copy_file_range
Now that we have generic_copy_file_range(), remove it as a fallback
case when offloads fail. This puts the responsibility for executing
fallbacks on the filesystems that implement ->copy_file_range and
allows us to add operational validity checks to
generic_copy_file_range().

Rework vfs_copy_file_range() to call a new do_copy_file_range()
helper to execute the copying callout, and move calls to
generic_file_copy_range() into filesystem methods where they
currently return failures.

[Amir] overlayfs is not responsible of executing the fallback.
It is the responsibility of the underlying filesystem.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-06-09 10:06:19 -07:00
Yan, Zheng
1cf89a8dee ceph: single workqueue for inode related works
We have three workqueue for inode works. Later patch will introduce
one more work for inode. It's not good to introcuce more workqueue
and add more 'struct work_struct' to 'struct ceph_inode_info'.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-06-05 20:34:39 +02:00
Linus Torvalds
1d9d7cbf28 On the filesystem side we have:
- a fix to enforce quotas set above the mount point (Luis Henriques)
 
 - support for exporting snapshots through NFS (Zheng Yan)
 
 - proper statx implementation (Jeff Layton).  statx flags are mapped
   to MDS caps, with AT_STATX_{DONT,FORCE}_SYNC taken into account.
 
 - some follow-up dentry name handling fixes, in particular elimination
   of our hand-rolled helper and the switch to __getname() as suggested
   by Al (Jeff Layton)
 
 - a set of MDS client cleanups in preparation for async MDS requests
   in the future (Jeff Layton)
 
 - a fix to sync the filesystem before remounting (Jeff Layton)
 
 On the rbd side, work is on-going on object-map and fast-diff image
 features.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlzdgEkTHGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzi2w0B/9AsskuQezu8HP0NumCNfdgfI02r6d1
 1ZixMp6q8AAtOZYHP0bmiLzaETwC3+sRkD+8nX5DWuFISyjkTlRn8f7wnoziWkBT
 bBmL21fufkSKXN41VFCdolAbUPCKuA8+Fr7YE2hCl517ejbf47W+htv7+a56eTiR
 iAiDyVYokB8sj7WTVW6ET4HJTvJly1Z4QUNmy9Ljfzc8AvL2LFLOe6FRsJtIThdx
 aE00RX9EQsKO2v9ROd6jDmZocg50TvFmgF14A5GFfMmFrxJuri2yEI4iZd3hSKu2
 yZ+fBWmRy4E9w5E20qufrM+bSVjA+Zi7aiTMriaBm54aYtflgJ5gxhFI
 =68dZ
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-5.2-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "On the filesystem side we have:

   - a fix to enforce quotas set above the mount point (Luis Henriques)

   - support for exporting snapshots through NFS (Zheng Yan)

   - proper statx implementation (Jeff Layton). statx flags are mapped
     to MDS caps, with AT_STATX_{DONT,FORCE}_SYNC taken into account.

   - some follow-up dentry name handling fixes, in particular
     elimination of our hand-rolled helper and the switch to __getname()
     as suggested by Al (Jeff Layton)

   - a set of MDS client cleanups in preparation for async MDS requests
     in the future (Jeff Layton)

   - a fix to sync the filesystem before remounting (Jeff Layton)

  On the rbd side, work is on-going on object-map and fast-diff image
  features"

* tag 'ceph-for-5.2-rc1' of git://github.com/ceph/ceph-client: (29 commits)
  ceph: flush dirty inodes before proceeding with remount
  ceph: fix unaligned access in ceph_send_cap_releases
  libceph: make ceph_pr_addr take an struct ceph_entity_addr pointer
  libceph: fix unaligned accesses in ceph_entity_addr handling
  rbd: don't assert on writes to snapshots
  rbd: client_mutex is never nested
  ceph: print inode number in __caps_issued_mask debugging messages
  ceph: just call get_session in __ceph_lookup_mds_session
  ceph: simplify arguments and return semantics of try_get_cap_refs
  ceph: fix comment over ceph_drop_caps_for_unlink
  ceph: move wait for mds request into helper function
  ceph: have ceph_mdsc_do_request call ceph_mdsc_submit_request
  ceph: after an MDS request, do callback and completions
  ceph: use pathlen values returned by set_request_path_attr
  ceph: use __getname/__putname in ceph_mdsc_build_path
  ceph: use ceph_mdsc_build_path instead of clone_dentry_name
  ceph: fix potential use-after-free in ceph_mdsc_build_path
  ceph: dump granular cap info in "caps" debugfs file
  ceph: make iterate_session_caps a public symbol
  ceph: fix NULL pointer deref when debugging is enabled
  ...
2019-05-16 16:24:01 -07:00
Jeff Layton
40e7e2c0e8 ceph: fix NULL pointer deref when debugging is enabled
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-05-07 19:22:37 +02:00
Gustavo A. R. Silva
0a4c92657f fs: mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

This patch fixes the following warnings:

fs/affs/affs.h:124:38: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/configfs/dir.c:1692:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/configfs/dir.c:1694:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ceph/file.c:249:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/hash.c:233:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/hash.c:246:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext2/inode.c:1237:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext2/inode.c:1244:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1182:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1188:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1432:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ext4/indirect.c:1440:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/f2fs/node.c:618:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/f2fs/node.c:620:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/btrfs/ref-verify.c:522:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/gfs2/bmap.c:711:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/gfs2/bmap.c:722:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/jffs2/fs.c:339:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/nfsd/nfs4proc.c:429:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ufs/util.h:62:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/ufs/util.h:43:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/fcntl.c:770:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/seq_file.c:319:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/libfs.c:148:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/libfs.c:150:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/signalfd.c:178:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
fs/locks.c:1473:16: warning: this statement may fall through [-Wimplicit-fallthrough=]

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-04-08 18:21:02 -05:00
zhengbin
e450f4d1a5 ceph: pass inclusive lend parameter to filemap_write_and_wait_range()
The 'lend' parameter of filemap_write_and_wait_range is required to be
inclusive, so follow the rule. Same for invalidate_inode_pages2_range.

Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05 18:55:17 +01:00
Luis Henriques
c2c6d3ce0d ceph: add destination file data sync before doing any remote copy
If we try to copy into a file that was just written, any data that is
remote copied will be overwritten by our buffered writes once they are
flushed.  When this happens, the call to invalidate_inode_pages2_range
will also return a -EBUSY error.

This patch fixes this by also sync'ing the destination file before
starting any copy.

Fixes: 503f82a993 ("ceph: support copy_file_range file operation")
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-11-08 17:50:37 +01:00
Linus Torvalds
9931a07d51 Merge branch 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull AFS updates from Al Viro:
 "AFS series, with some iov_iter bits included"

* 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
  missing bits of "iov_iter: Separate type from direction and use accessor functions"
  afs: Probe multiple fileservers simultaneously
  afs: Fix callback handling
  afs: Eliminate the address pointer from the address list cursor
  afs: Allow dumping of server cursor on operation failure
  afs: Implement YFS support in the fs client
  afs: Expand data structure fields to support YFS
  afs: Get the target vnode in afs_rmdir() and get a callback on it
  afs: Calc callback expiry in op reply delivery
  afs: Fix FS.FetchStatus delivery from updating wrong vnode
  afs: Implement the YFS cache manager service
  afs: Remove callback details from afs_callback_break struct
  afs: Commit the status on a new file/dir/symlink
  afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS
  afs: Don't invoke the server to read data beyond EOF
  afs: Add a couple of tracepoints to log I/O errors
  afs: Handle EIO from delivery function
  afs: Fix TTL on VL server and address lists
  afs: Implement VL server rotation
  afs: Improve FS server rotation error handling
  ...
2018-11-01 19:58:52 -07:00
David Howells
aa563d7bca iov_iter: Separate type from direction and use accessor functions
In the iov_iter struct, separate the iterator type from the iterator
direction and use accessor functions to access them in most places.

Convert a bunch of places to use switch-statements to access them rather
then chains of bitwise-AND statements.  This makes it easier to add further
iterator types.  Also, this can be more efficient as to implement a switch
of small contiguous integers, the compiler can use ~50% fewer compare
instructions than it has to use bitwise-and instructions.

Further, cease passing the iterator type into the iterator setup function.
The iterator function can set that itself.  Only the direction is required.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-24 00:41:07 +01:00
David Howells
00e2370744 iov_iter: Use accessor function
Use accessor functions to access an iterator's type and direction.  This
allows for the possibility of using some other method of determining the
type of iterator than if-chains with bitwise-AND conditions.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-24 00:40:44 +01:00
Luis Henriques
ea4cdc548e ceph: new mount option to disable usage of copy-from op
Add a new mount option 'nocopyfrom' that will prevent the usage of the
RADOS 'copy-from' operation in cephfs.  This could be useful, for example,
for an administrator to temporarily mitigate any possible bugs in the
'copy-from' implementation.

Currently, only copy_file_range uses this RADOS operation.  Setting this
mount option will result in this syscall reverting to the default VFS
implementation, i.e. to perform the copies locally instead of doing remote
object copies.

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:24 +02:00
Luis Henriques
503f82a993 ceph: support copy_file_range file operation
This commit implements support for the copy_file_range syscall in cephfs.
It is implemented using the RADOS 'copy-from' operation, which allows to
do a remote object copy, without the need to download/upload data from/to
the OSDs.

Some manual copy may however be required if the source/destination file
offsets aren't object aligned or if the copy length is smaller than the
object size.

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:24 +02:00
Ilya Dryomov
26f887e0a3 libceph, rbd, ceph: move ceph_osdc_alloc_messages() calls
The current requirement is that ceph_osdc_alloc_messages() should be
called after oid and oloc are known.  In preparation for preallocating
message data items, move ceph_osdc_alloc_messages() further down, so
that it is called when OSD op codes are known.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:22 +02:00
Ilya Dryomov
61d2f85504 ceph: num_ops is off by one in ceph_aio_retry_work()
Two OSD op slots are allocated, but only one is ever used.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:21 +02:00
Luis Henriques
bddff633ab ceph: only allow punch hole mode in fallocate
Current implementation of cephfs fallocate isn't correct as it doesn't
really reserve the space in the cluster, which means that a subsequent
call to a write may actually fail due to lack of space.  In fact, it is
currently possible to fallocate an amount space that is larger than the
free space in the cluster.  It has behaved this way since the initial
commit ad7a60de88 ("ceph: punch hole support").

Since there's no easy solution to fix this at the moment, this patch
simply removes support for all fallocate operations but
FALLOC_FL_PUNCH_HOLE (which implies FALLOC_FL_KEEP_SIZE).

Link: https://tracker.ceph.com/issues/36317
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:20 +02:00
Yan, Zheng
fce7a9744b ceph: refactor ceph_sync_read()
Avoid allocating memory for the entire user request: striped_read()
does a synchronous OSD request per object, so it doesn't need more than
object size worth of pages at a time.

[ Preserve the comment, changelog. ]

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-10-22 10:28:20 +02:00
Linus Torvalds
0a78ac4b9b The main things are support for cephx v2 authentication protocol and
basic support for rbd images within namespaces (myself).  Also included
 y2038 conversion patches from Arnd, a pile of miscellaneous fixes from
 Chengguang and Zheng's feature bit infrastructure for the filesystem.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlt62CkTHGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzizfhB/0c/rz6frunc6EcZMWuBNzlOIOktJ/m
 MEbPGjCxMAsmidO1rqHHYF4iEN5hr+3AWTbtIL2m6wkqYVdg3FjmNaAYB27AdQMG
 kH9bLfrKIew72/NZqXfm25yjY/86kIt8t91kay4Lchc97tSYhnFSnku7iAX2HTND
 TMhq/1O/GvEyw/RmqnenJEQqFJvKnfgPPQm6W8sM2bH0T5j+EXmDT/Rv+90LogFR
 J4+pZkHqDfvyMb1WJ5MkumohytbRVzRNKcMpOvjquJSqUgtgZa2JdrIsypDqSNKY
 nUT6jGGlxoSbHCqRwDJoFEJOlh5A9RwKqYxNuM2a/vs9u7HpvdCK/Iah
 =AtgY
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "The main things are support for cephx v2 authentication protocol and
  basic support for rbd images within namespaces (myself).

  Also included are y2038 conversion patches from Arnd, a pile of
  miscellaneous fixes from Chengguang and Zheng's feature bit
  infrastructure for the filesystem"

* tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client: (40 commits)
  ceph: don't drop message if it contains more data than expected
  ceph: support cephfs' own feature bits
  crush: fix using plain integer as NULL warning
  libceph: remove unnecessary non NULL check for request_key
  ceph: refactor error handling code in ceph_reserve_caps()
  ceph: refactor ceph_unreserve_caps()
  ceph: change to void return type for __do_request()
  ceph: compare fsc->max_file_size and inode->i_size for max file size limit
  ceph: add additional size check in ceph_setattr()
  ceph: add additional offset check in ceph_write_iter()
  ceph: add additional range check in ceph_fallocate()
  ceph: add new field max_file_size in ceph_fs_client
  libceph: weaken sizeof check in ceph_x_verify_authorizer_reply()
  libceph: check authorizer reply/challenge length before reading
  libceph: implement CEPHX_V2 calculation mode
  libceph: add authorizer challenge
  libceph: factor out encrypt_authorizer()
  libceph: factor out __ceph_x_decrypt()
  libceph: factor out __prepare_write_connect()
  libceph: store ceph_auth_handshake pointer in ceph_connection
  ...
2018-08-20 18:26:55 -07:00
Chengguang Xu
9da12e3a7d ceph: compare fsc->max_file_size and inode->i_size for max file size limit
In ceph_llseek(), we compare fsc->max_file_size and inode->i_size to
choose max file size limit.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-13 17:55:43 +02:00
Chengguang Xu
8687a3e2c7 ceph: add additional offset check in ceph_write_iter()
If the offset is larger or equal to both real file size and
max file size, then return -EFBIG.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:33:28 +02:00
Chengguang Xu
0671e9968d ceph: add additional range check in ceph_fallocate()
If the range is larger than both real file size and limit of
max file size, then return -EFBIG.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:33:28 +02:00
Arnd Bergmann
fac02ddf91 libceph: use timespec64 for r_mtime
The request mtime field is used all over ceph, and is currently
represented as a 'timespec' structure in Linux. This changes it to
timespec64 to allow times beyond 2038, modifying all users at the
same time.

[ Remove now redundant ts variable in writepage_nounlock(). ]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02 21:33:14 +02:00
Al Viro
44907d7900 get rid of 'opened' argument of ->atomic_open() - part 3
now it can be done...

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 10:04:20 -04:00
Al Viro
be12af3ef5 getting rid of 'opened' argument of ->atomic_open() - part 1
'opened' argument of finish_open() is unused.  Kill it.

Signed-off-by Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 10:04:19 -04:00
Al Viro
73a09dd943 introduce FMODE_CREATED and switch to it
Parallel to FILE_CREATED, goes into ->f_mode instead of *opened.
NFS is a bit of a wart here - it doesn't have file at the point
where FILE_CREATED used to be set, so we need to propagate it
there (for now).  IMA is another one (here and everywhere)...

Note that this needs do_dentry_open() to leave old bits in ->f_mode
alone - we want it to preserve FMODE_CREATED if it had been already
set (no other bit can be there).

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 10:04:18 -04:00
Linus Torvalds
7a932516f5 vfs/y2038: inode timestamps conversion to timespec64
This is a late set of changes from Deepa Dinamani doing an automated
 treewide conversion of the inode and iattr structures from 'timespec'
 to 'timespec64', to push the conversion from the VFS layer into the
 individual file systems.
 
 There were no conflicts between this and the contents of linux-next
 until just before the merge window, when we saw multiple problems:
 
 - A minor conflict with my own y2038 fixes, which I could address
   by adding another patch on top here.
 - One semantic conflict with late changes to the NFS tree. I addressed
   this by merging Deepa's original branch on top of the changes that
   now got merged into mainline and making sure the merge commit includes
   the necessary changes as produced by coccinelle.
 - A trivial conflict against the removal of staging/lustre.
 - Multiple conflicts against the VFS changes in the overlayfs tree.
   These are still part of linux-next, but apparently this is no longer
   intended for 4.18 [1], so I am ignoring that part.
 
 As Deepa writes:
 
   The series aims to switch vfs timestamps to use struct timespec64.
   Currently vfs uses struct timespec, which is not y2038 safe.
 
   The series involves the following:
   1. Add vfs helper functions for supporting struct timepec64 timestamps.
   2. Cast prints of vfs timestamps to avoid warnings after the switch.
   3. Simplify code using vfs timestamps so that the actual
      replacement becomes easy.
   4. Convert vfs timestamps to use struct timespec64 using a script.
      This is a flag day patch.
 
   Next steps:
   1. Convert APIs that can handle timespec64, instead of converting
      timestamps at the boundaries.
   2. Update internal data structures to avoid timestamp conversions.
 
 Thomas Gleixner adds:
 
   I think there is no point to drag that out for the next merge window.
   The whole thing needs to be done in one go for the core changes which
   means that you're going to play that catchup game forever. Let's get
   over with it towards the end of the merge window.
 
 [1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbInZAAAoJEGCrR//JCVInReoQAIlVIIMt5ZX6wmaKbrjy9Itf
 MfgbFihQ/djLnuSPVQ3nztcxF0d66BKHZ9puVjz6+mIHqfDvJTRwZs9nU+sOF/T1
 g78fRkM1cxq6ZCkGYAbzyjyo5aC4PnSMP/NQLmwqvi0MXqqrbDoq5ZdP9DHJw39h
 L9lD8FM/P7T29Fgp9tq/pT5l9X8VU8+s5KQG1uhB5hii4VL6pD6JyLElDita7rg+
 Z7/V7jkxIGEUWF7vGaiR1QTFzEtpUA/exDf9cnsf51OGtK/LJfQ0oiZPPuq3oA/E
 LSbt8YQQObc+dvfnGxwgxEg1k5WP5ekj/Wdibv/+rQKgGyLOTz6Q4xK6r8F2ahxs
 nyZQBdXqHhJYyKr1H1reUH3mrSgQbE5U5R1i3My0xV2dSn+vtK5vgF21v2Ku3A1G
 wJratdtF/kVBzSEQUhsYTw14Un+xhBLRWzcq0cELonqxaKvRQK9r92KHLIWNE7/v
 c0TmhFbkZA+zR8HdsaL3iYf1+0W/eYy8PcvepyldKNeW2pVk3CyvdTfY2Z87G2XK
 tIkK+BUWbG3drEGG3hxZ3757Ln3a9qWyC5ruD3mBVkuug/wekbI8PykYJS7Mx4s/
 WNXl0dAL0Eeu1M8uEJejRAe1Q3eXoMWZbvCYZc+wAm92pATfHVcKwPOh8P7NHlfy
 A3HkjIBrKW5AgQDxfgvm
 =CZX2
 -----END PGP SIGNATURE-----

Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground

Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
 "This is a late set of changes from Deepa Dinamani doing an automated
  treewide conversion of the inode and iattr structures from 'timespec'
  to 'timespec64', to push the conversion from the VFS layer into the
  individual file systems.

  As Deepa writes:

   'The series aims to switch vfs timestamps to use struct timespec64.
    Currently vfs uses struct timespec, which is not y2038 safe.

    The series involves the following:
    1. Add vfs helper functions for supporting struct timepec64
       timestamps.
    2. Cast prints of vfs timestamps to avoid warnings after the switch.
    3. Simplify code using vfs timestamps so that the actual replacement
       becomes easy.
    4. Convert vfs timestamps to use struct timespec64 using a script.
       This is a flag day patch.

    Next steps:
    1. Convert APIs that can handle timespec64, instead of converting
       timestamps at the boundaries.
    2. Update internal data structures to avoid timestamp conversions'

  Thomas Gleixner adds:

   'I think there is no point to drag that out for the next merge
    window. The whole thing needs to be done in one go for the core
    changes which means that you're going to play that catchup game
    forever. Let's get over with it towards the end of the merge window'"

* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
  pstore: Remove bogus format string definition
  vfs: change inode times to use struct timespec64
  pstore: Convert internal records to timespec64
  udf: Simplify calls to udf_disk_stamp_to_time
  fs: nfs: get rid of memcpys for inode times
  ceph: make inode time prints to be long long
  lustre: Use long long type to print inode time
  fs: add timespec64_truncate()
2018-06-15 07:31:07 +09:00
Deepa Dinamani
95582b0083 vfs: change inode times to use struct timespec64
struct timespec is not y2038 safe. Transition vfs to use
y2038 safe struct timespec64 instead.

The change was made with the help of the following cocinelle
script. This catches about 80% of the changes.
All the header file and logic changes are included in the
first 5 rules. The rest are trivial substitutions.
I avoid changing any of the function signatures or any other
filesystem specific data structures to keep the patch simple
for review.

The script can be a little shorter by combining different cases.
But, this version was sufficient for my usecase.

virtual patch

@ depends on patch @
identifier now;
@@
- struct timespec
+ struct timespec64
  current_time ( ... )
  {
- struct timespec now = current_kernel_time();
+ struct timespec64 now = current_kernel_time64();
  ...
- return timespec_trunc(
+ return timespec64_trunc(
  ... );
  }

@ depends on patch @
identifier xtime;
@@
 struct \( iattr \| inode \| kstat \) {
 ...
-       struct timespec xtime;
+       struct timespec64 xtime;
 ...
 }

@ depends on patch @
identifier t;
@@
 struct inode_operations {
 ...
int (*update_time) (...,
-       struct timespec t,
+       struct timespec64 t,
...);
 ...
 }

@ depends on patch @
identifier t;
identifier fn_update_time =~ "update_time$";
@@
 fn_update_time (...,
- struct timespec *t,
+ struct timespec64 *t,
 ...) { ... }

@ depends on patch @
identifier t;
@@
lease_get_mtime( ... ,
- struct timespec *t
+ struct timespec64 *t
  ) { ... }

@te depends on patch forall@
identifier ts;
local idexpression struct inode *inode_node;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn_update_time =~ "update_time$";
identifier fn;
expression e, E3;
local idexpression struct inode *node1;
local idexpression struct inode *node2;
local idexpression struct iattr *attr1;
local idexpression struct iattr *attr2;
local idexpression struct iattr attr;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
@@
(
(
- struct timespec ts;
+ struct timespec64 ts;
|
- struct timespec ts = current_time(inode_node);
+ struct timespec64 ts = current_time(inode_node);
)

<+... when != ts
(
- timespec_equal(&inode_node->i_xtime, &ts)
+ timespec64_equal(&inode_node->i_xtime, &ts)
|
- timespec_equal(&ts, &inode_node->i_xtime)
+ timespec64_equal(&ts, &inode_node->i_xtime)
|
- timespec_compare(&inode_node->i_xtime, &ts)
+ timespec64_compare(&inode_node->i_xtime, &ts)
|
- timespec_compare(&ts, &inode_node->i_xtime)
+ timespec64_compare(&ts, &inode_node->i_xtime)
|
ts = current_time(e)
|
fn_update_time(..., &ts,...)
|
inode_node->i_xtime = ts
|
node1->i_xtime = ts
|
ts = inode_node->i_xtime
|
<+... attr1->ia_xtime ...+> = ts
|
ts = attr1->ia_xtime
|
ts.tv_sec
|
ts.tv_nsec
|
btrfs_set_stack_timespec_sec(..., ts.tv_sec)
|
btrfs_set_stack_timespec_nsec(..., ts.tv_nsec)
|
- ts = timespec64_to_timespec(
+ ts =
...
-)
|
- ts = ktime_to_timespec(
+ ts = ktime_to_timespec64(
...)
|
- ts = E3
+ ts = timespec_to_timespec64(E3)
|
- ktime_get_real_ts(&ts)
+ ktime_get_real_ts64(&ts)
|
fn(...,
- ts
+ timespec64_to_timespec(ts)
,...)
)
...+>
(
<... when != ts
- return ts;
+ return timespec64_to_timespec(ts);
...>
)
|
- timespec_equal(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_equal(&node1->i_xtime2, &node2->i_xtime2)
|
- timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2)
+ timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2)
|
- timespec_compare(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_compare(&node1->i_xtime1, &node2->i_xtime2)
|
node1->i_xtime1 =
- timespec_trunc(attr1->ia_xtime1,
+ timespec64_trunc(attr1->ia_xtime1,
...)
|
- attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2,
+ attr1->ia_xtime1 =  timespec64_trunc(attr2->ia_xtime2,
...)
|
- ktime_get_real_ts(&attr1->ia_xtime1)
+ ktime_get_real_ts64(&attr1->ia_xtime1)
|
- ktime_get_real_ts(&attr.ia_xtime1)
+ ktime_get_real_ts64(&attr.ia_xtime1)
)

@ depends on patch @
struct inode *node;
struct iattr *attr;
identifier fn;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
expression e;
@@
(
- fn(node->i_xtime);
+ fn(timespec64_to_timespec(node->i_xtime));
|
 fn(...,
- node->i_xtime);
+ timespec64_to_timespec(node->i_xtime));
|
- e = fn(attr->ia_xtime);
+ e = fn(timespec64_to_timespec(attr->ia_xtime));
)

@ depends on patch forall @
struct inode *node;
struct iattr *attr;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
fn (...,
- &attr->ia_xtime,
+ &ts,
...);
)
...+>
}

@ depends on patch forall @
struct inode *node;
struct iattr *attr;
struct kstat *stat;
identifier ia_xtime =~ "^ia_[acm]time$";
identifier i_xtime =~ "^i_[acm]time$";
identifier xtime =~ "^[acm]time$";
identifier fn, ret;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(stat->xtime);
ret = fn (...,
- &stat->xtime);
+ &ts);
)
...+>
}

@ depends on patch @
struct inode *node;
struct inode *node2;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier i_xtime3 =~ "^i_[acm]time$";
struct iattr *attrp;
struct iattr *attrp2;
struct iattr attr ;
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
struct kstat *stat;
struct kstat stat1;
struct timespec64 ts;
identifier xtime =~ "^[acmb]time$";
expression e;
@@
(
( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1  ;
|
 node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \);
|
 node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
 node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
 stat->xtime = node2->i_xtime1;
|
 stat1.xtime = node2->i_xtime1;
|
( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1  ;
|
( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2;
|
- e = node->i_xtime1;
+ e = timespec64_to_timespec( node->i_xtime1 );
|
- e = attrp->ia_xtime1;
+ e = timespec64_to_timespec( attrp->ia_xtime1 );
|
node->i_xtime1 = current_time(...);
|
 node->i_xtime2 = node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
 node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
- node->i_xtime1 = e;
+ node->i_xtime1 = timespec_to_timespec64(e);
)

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: <anton@tuxera.com>
Cc: <balbi@kernel.org>
Cc: <bfields@fieldses.org>
Cc: <darrick.wong@oracle.com>
Cc: <dhowells@redhat.com>
Cc: <dsterba@suse.com>
Cc: <dwmw2@infradead.org>
Cc: <hch@lst.de>
Cc: <hirofumi@mail.parknet.co.jp>
Cc: <hubcap@omnibond.com>
Cc: <jack@suse.com>
Cc: <jaegeuk@kernel.org>
Cc: <jaharkes@cs.cmu.edu>
Cc: <jslaby@suse.com>
Cc: <keescook@chromium.org>
Cc: <mark@fasheh.com>
Cc: <miklos@szeredi.hu>
Cc: <nico@linaro.org>
Cc: <reiserfs-devel@vger.kernel.org>
Cc: <richard@nod.at>
Cc: <sage@redhat.com>
Cc: <sfrench@samba.org>
Cc: <swhiteho@redhat.com>
Cc: <tj@kernel.org>
Cc: <trond.myklebust@primarydata.com>
Cc: <tytso@mit.edu>
Cc: <viro@zeniv.linux.org.uk>
2018-06-05 16:57:31 -07:00
Ilya Dryomov
c843d13cae libceph: make abort_on_full a per-osdc setting
The intent behind making it a per-request setting was that it would be
set for writes, but not for reads.  As it is, the flag is set for all
fs/ceph requests except for pool perm check stat request (technically
a read).

ceph_osdc_abort_on_full() skips reads since the previous commit and
I don't see a use case for marking individual requests.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-06-04 20:46:00 +02:00
Ilya Dryomov
fc218544fb ceph: fix iov_iter issues in ceph_direct_read_write()
dio_get_pagev_size() and dio_get_pages_alloc() introduced in commit
b5b98989dc ("ceph: combine as many iovec as possile into one OSD
request") assume that the passed iov_iter is ITER_IOVEC.  This isn't
the case with splice where it ends up poking into the guts of ITER_BVEC
or ITER_PIPE iterators, causing lockups and crashes easily reproduced
with generic/095.

Rather than trying to figure out gap alignment and stuff pages into
a page vector, add a helper for going from iov_iter to a bio_vec array
and make use of the new CEPH_OSD_DATA_TYPE_BVECS code.

Fixes: b5b98989dc ("ceph: combine as many iovec as possile into one OSD request")
Link: http://tracker.ceph.com/issues/18130
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Tested-by: Luis Henriques <lhenriques@suse.com>
2018-05-10 10:15:12 +02:00
Ilya Dryomov
3a15b38fd2 ceph: fix rsize/wsize capping in ceph_direct_read_write()
rsize/wsize cap should be applied before ceph_osdc_new_request() is
called.  Otherwise, if the size is limited by the cap instead of the
stripe unit, ceph_osdc_new_request() would setup an extent op that is
bigger than what dio_get_pages_alloc() would pin and add to the page
vector, triggering asserts in the messenger.

Cc: stable@vger.kernel.org
Fixes: 95cca2b44e ("ceph: limit osd write size")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-05-10 10:15:00 +02:00
Luis Henriques
1ab302a0cb ceph: quota: update MDS when max_bytes is approaching
When we're reaching the ceph.quota.max_bytes limit, i.e., when writing
more than 1/16th of the space left in a quota realm, update the MDS with
the new file size.

This mirrors the fuse-client approach with commit 122c50315ed1 ("client:
Inform mds file size when approaching quota limit"), in the ceph git tree.

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02 11:17:52 +02:00
Luis Henriques
2b83845f8b ceph: quota: support for ceph.quota.max_bytes
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02 11:17:52 +02:00
Luis Henriques
b7a2921765 ceph: quota: support for ceph.quota.max_files
This patch adds support for the max_files quota.  It hooks into all the
ceph functions that add new filesystem objects that need to be checked
against the quota limits.  When these limits are hit, -EDQUOT is returned.

Note that we're not checking quotas on ceph_link().  ceph_link doesn't
really create a new inode,  and since the MDS doesn't update the directory
statistics when a new (hard) link is created (only with symlinks), they
are not accounted as a new file.

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02 11:17:51 +02:00
Chengguang Xu
bb48bd4dc4 ceph: optimize memory usage
In current code, regular file and directory use same struct
ceph_file_info to store fs specific data so the struct has to
include some fields which are only used for directory
(e.g., readdir related info), when having plenty of regular files,
it will lead to memory waste.

This patch introduces dedicated ceph_dir_file_info cache for
readdir related thins. So that regular file does not include those
unused fields anymore.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02 10:12:49 +02:00
Chengguang Xu
51b10f3fe4 ceph: filter out used flags when printing unused open flags
Filter out used access mode flags when printing unused open flags.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02 10:12:48 +02:00
Chengguang Xu
73737682e0 ceph: change variable name to follow common rule
Variable name ci is mostly used for ceph_inode_info.
Variable name fi is mostly used for ceph_file_info.
Variable name cf is mostly used for ceph_cap_flush.

Change variable name to follow above common rules
in case of confusing.

Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02 10:12:47 +02:00
Chengguang Xu
4c069a5821 ceph: add newline to end of debug message format
Some of dout format do not include newline in the end,
fix for the files which are in fs/ceph and net/ceph directories,
and changing printk to dout for printing debug info in super.c

Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02 10:12:44 +02:00