The "--duration <minutes>" has worked well for a very long time, but
it can be inconvenient to compute the minutes for (say) a 28-hour run.
It can also be annoying to have to let a simple boot test run for a full
minute. This commit therefore permits an "s" suffix to specify seconds,
"m" to specify minutes (which remains the default), "h" suffix to specify
hours, and "d" to specify days.
With this change, "--duration 5" still specifies that each scenario
run for five minutes, but "--duration 30s" runs for only 30 seconds,
"--duration 8h" runs for eight hours, and "--duration 2d" runs for
two days.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Although the rcutorture scripting now deals correctly with full-up
security-induced pointer obfuscation, it is still counter-productive for
kernel hackers who are analyzing console output. This commit therefore
sets the debug_boot_weak_hash kernel boot parameter, which enables
printing of weak-hashed pointers for torture-test runs.
Please note that this change applies only to runs initiated by the
kvm.sh scripting. If you are instead using modprobe and rmmod, it is
your responsibility to build and boot the underlying kernel to your taste.
Please note further that this change does not result in a security hole
in normal use. The rcutorture testing runs with a negligible userspace,
no networking, and no user interaction. Besides which, there is no data
of value that can be extracted from an rcutorture guest OS that could
not also be extracted from the host that this guest is running on.
Suggested-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Even when the kernel panics and qemu dies, runs with jitter enabled will
continue uselessly until the jitter.sh processes terminate. This can
be annoying if a planned one-hour run instead dies during boot.
This commit therefore kills the jitter.sh processes when the run ends
more than one minute prior to the termination time specified by the
kvm.sh --duration argument or its default.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The SRCU-u scenario expects to enable lockdep but to also disable the
CONFIG_PREEMPT_COUNT kconfig option. This no longer works. This commit
therefore instead enables lockdep in SRCU-t, which then allows SRCU-u
to disable CONFIG_PREEMPT_COUNT.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The "NOHZ tick-stop error: Non-RCU local softirq work is pending"
warning happens frequently and appears to be irrelevant to the various
torture tests. This commit therefore filters it out.
If there proves to be a need to pay attention to it a later commit will
add an "advice" category to allow the user to immediately see that
although something happened, it was not an indictment of the system
being tortured.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcuscale test module does not use batches, so there is only
ever one batch. This commit therefore informs the kvm-recheck-rcuscale.sh
script of this fact of life.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds the ability to test performance and scalability of RCU
Tasks Trace updaters.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Pull Kselftest fixes from Shuah Khan:
"Fixes to the ftrace test and several fixes from Tommi Rantala for
various other tests"
* tag 'linux-kselftest-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: binderfs: use SKIP instead of XFAIL
selftests: clone3: use SKIP instead of XFAIL
selftests: core: use SKIP instead of XFAIL in close_range_test.c
selftests: proc: fix warning: _GNU_SOURCE redefined
selftests: pidfd: drop needless linux/kcmp.h inclusion in pidfd_setns_test.c
selftests: pidfd: add CONFIG_CHECKPOINT_RESTORE=y to config
selftests: pidfd: skip test on kcmp() ENOSYS
selftests: pidfd: use ksft_test_result_skip() when skipping test
selftests/harness: prettify SKIP message whitespace again
selftests: pidfd: fix compilation errors due to wait.h
selftests: filter kselftest headers from command in lib.mk
selftests/ftrace: check for do_sys_openat2 in user-memory test
selftests/ftrace: Use $FUNCTION_FORK to reference kernel fork function
pidfd_open was added in 2019. Some versions of libc library don't define it.
Define it manually if it's not available.
Reported-by: Sergei Iudin <siudin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc3, including fixes from wireless, can, and
netfilter subtrees.
Current merge window - bugs in new features:
- can: isotp: isotp_rcv_cf(): enable RX timeout handling in
listen-only mode
Previous releases - regressions:
- mac80211:
- don't require VHT elements for HE on 2.4 GHz
- fix regression where EAPOL frames were sent in plaintext
- netfilter:
- ipset: Update byte and packet counters regardless of whether
they match
- ip_tunnel: fix over-mtu packet send by allowing fragmenting even if
inner packet has IP_DF (don't fragment) set in its header (when
TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev)
- net: fec: fix MDIO probing for some FEC hardware blocks
- ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break gso
support
- sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian
platforms, sparse-related fix used the wrong integer size
Previous releases - always broken:
- netfilter: use actual socket sk rather than skb sk when routing
harder
- r8169: work around short packet hw bug on RTL8125 by padding frames
- net: ethernet: ti: cpsw: disable PTPv1 hw timestamping
advertisement, the hardware does not support it
- chelsio/chtls: fix always leaking ctrl_skb and another leak caused
by a race condition
- fix drivers incorrectly writing into skbs on TX:
- cadence: force nonlinear buffers to be cloned
- gianfar: Account for Tx PTP timestamp in the skb headroom
- gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP
- can: flexcan:
- remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
- add ECC initialization for VF610 and LX2160A
- flexcan_remove(): disable wakeup completely
- can: fix packet echo functionality:
- peak_canfd: fix echo management when loopback is on
- make sure skbs are not freed in IRQ context in case they need to
be dropped
- always clone the skbs to make sure they have a reference on the
socket, and prevent it from disappearing
- fix real payload length return value for RTR frames
- can: j1939: return failure on bind if netdev is down, rather than
waiting indefinitely
Misc:
- IPv6: reply ICMP error if the first fragment don't include all
headers to improve compliance with RFC 8200"
* tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
ionic: check port ptr before use
r8169: work around short packet hw bug on RTL8125
net: openvswitch: silence suspicious RCU usage warning
chelsio/chtls: fix always leaking ctrl_skb
chelsio/chtls: fix memory leaks caused by a race
can: flexcan: flexcan_remove(): disable wakeup completely
can: flexcan: add ECC initialization for VF610
can: flexcan: add ECC initialization for LX2160A
can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
can: mcp251xfd: remove unneeded break
can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
can: peak_usb: add range checking in decode operations
can: xilinx_can: handle failure cases of pm_runtime_get_sync
can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
can: isotp: padlen(): make const array static, makes object smaller
can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
can: isotp: Explain PDU in CAN_ISOTP help text
...
Test various aspects of the nexthop offload API on top of the netdevsim
implementation. Both good and bad flows are tested.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the check_syscall_operations added for task_local_storage to
exercise syscall operations for other local storage maps:
* Check the absence of an element for the given fd.
* Create a new element, retrieve and compare its value.
* Delete the element and check again for absence.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-10-kpsingh@chromium.org
The test exercises the syscall based map operations by creating a pidfd
for the current process.
For verifying kernel / LSM functionality, the test implements a simple
MAC policy which denies an executable from unlinking itself. The LSM
program bprm_committed_creds sets a task_local_storage with a pointer to
the inode. This is then used to detect if the task is trying to unlink
itself in the inode_unlink LSM hook.
The test copies /bin/rm to /tmp and executes it in a child thread with
the intention of deleting itself. A successful test should prevent the
the running executable from deleting itself.
The bpf programs are also updated to call bpf_spin_{lock, unlock} to
trigger the verfier checks for spin locks.
The temporary file is cleaned up later in the test.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-9-kpsingh@chromium.org
Currently key_size of hashtab is limited to MAX_BPF_STACK.
As the key of hashtab can also be a value from a per cpu map it can be
larger than MAX_BPF_STACK.
The use-case for this patch originates to implement allow/disallow
lists for files and file paths. The maximum length of file paths is
defined by PATH_MAX with 4096 chars including nul.
This limit exceeds MAX_BPF_STACK.
Changelog:
v5:
- Fix cast overflow
v4:
- Utilize BPF skeleton in tests
- Rebase
v3:
- Rebase
v2:
- Add a test for bpf side
Signed-off-by: Florian Lehner <dev@der-flo.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201029201442.596690-1-dev@der-flo.net
Zero-fill element values for all other cpus than current, just as
when not using prealloc. This is the only way the bpf program can
ensure known initial values for all cpus ('onallcpus' cannot be
set when coming from the bpf program).
The scenario is: bpf program inserts some elements in a per-cpu
map, then deletes some (or userspace does). When later adding
new elements using bpf_map_update_elem(), the bpf program can
only set the value of the new elements for the current cpu.
When prealloc is enabled, previously deleted elements are re-used.
Without the fix, values for other cpus remain whatever they were
when the re-used entry was previously freed.
A selftest is added to validate correct operation in above
scenario as well as in case of LRU per-cpu map element re-use.
Fixes: 6c90598174 ("bpf: pre-allocate hash map elements")
Signed-off-by: David Verbeiren <david.verbeiren@tessares.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201104112332.15191-1-david.verbeiren@tessares.net
Add re-usable btf_helpers.{c,h} to provide BTF-related testing routines. Start
with adding a raw BTF dumping helpers.
Raw BTF dump is the most succinct and at the same time a very human-friendly
way to validate exact contents of BTF types. Cross-validate raw BTF dump and
writable BTF in a single selftest. Raw type dump checks also serve as a good
self-documentation.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-7-andrii@kernel.org
Remove the requirement of a strictly exact string section contents. This used
to be true when string deduplication was done through sorting, but with string
dedup done through hash table, it's no longer true. So relax test harness to
relax strings checks and, consequently, type checks, which now don't have to
have exactly the same string offsets.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-3-andrii@kernel.org
Pull Kunit fixes from Shuah Khan:
"Several kunit_tool and documentation fixes"
* tag 'linux-kselftest-kunit-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tools: fix kunit_tool tests for parsing test plans
Documentation: kunit: Update Kconfig parts for KUNIT's module support
kunit: test: fix remaining kernel-doc warnings
kunit: Don't fail test suites if one of them is empty
kunit: Fix kunit.py --raw_output option
This patch added the test case for retransmitting ADD_ADDR when timeout
occurs. It set NS1's add_addr_timeout to 1 second, and drop NS2's ADD_ADDR
echo packets.
Here we need to slow down the transfer process of all data to let the
ADD_ADDR suboptions can be retransmitted three times. So we added a new
parameter "speed" for do_transfer, it can be set with fast or slow.
We also added three new optional parameters for run_tests, and dropped
run_remove_tests function.
Since we added the netfilter rules in this test case, we need to update
the "config" file.
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we have *,G ports in exclude mode and a new S,G,port is added
the kernel has to automatically create an S,G entry for each exclude
port to get proper forwarding.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that when a group in exclude mode expires it changes mode to
include and the blocked entries are deleted.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
EXCLUDE (X,Y) BLOCK (A) EXCLUDE (X+(A-Y),Y) (A-X-Y) =
Filter Timer
Send Q(MA,A-Y)
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
INCLUDE (A) BLOCK (B) INCLUDE (A) Send Q(MA,A*B)
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
EXCLUDE (X,Y) TO_EX (A) EXCLUDE (A-Y,Y*A) (A-X-Y) =
Filter Timer
Delete (X-A)
Delete (Y-A)
Send Q(MA,A-Y)
Filter Timer=MALI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
EXCLUDE (X,Y) IS_EX (A) EXCLUDE (A-Y, Y*A) (A-X-Y)=MALI
Delete (X-A)
Delete (Y-A)
Filter Timer=MALI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
EXCLUDE (X,Y) IS_IN (A) EXCLUDE (X+A, Y-A) (A)=MALI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
EXCLUDE (X,Y) ALLOW (A) EXCLUDE (X+A,Y-A) (A)=MALI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
INCLUDE (A) TO_EX (B) EXCLUDE (A*B,B-A) (B-A)=0
Delete (A-B)
Send Q(MA,A*B)
Filter Timer=MALI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
INCLUDE (A) IS_EX (B) EXCLUDE (A*B, B-A) (B-A)=0
Delete (A-B)
Filter Timer=MALI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
INCLUDE (A) IS_IN (B) INCLUDE (A+B) (B)=MALI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks for the following case:
Router State Report Received New Router State Actions
INCLUDE (A) ALLOW (B) INCLUDE (A+B) (B)=MALI
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the initial setup for MLDv2 tests with the first test of a simple
is_include report. For MLDv2 we need to setup the bridge properly and we
also send the full precooked packets instead of relying on mausezahn to
fill in some parts. For verification we use the generic S,G state checking
functions from lib.sh.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor out S,G entry state checking functions for existence, forwarding,
blocking and timer to lib.sh so they can be later used by MLDv2 tests.
Add brmcast_ suffix to their name to make the relation to the bridge
explicit.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to test an IPv6 multicast packet we need to pass different tc
and mausezahn protocols only, so add a simple check for the destination
address which decides if we should generate an IPv4 or IPv6 mcast
packet.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor out mcast_packet_test into lib.sh so it can be later extended and
reused by MLDv2 tests.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is already logic in test_progs.h for asserting that a value is
expected to be another value. So instead of reinventing it we should just
make use of ASSERT_EQ in tcpbpf_user.c. This will allow for better
debugging and integrates much more closely with the test_progs framework.
In addition we can refactor the code a bit to merge together the two
verify functions and tie them together into a single function. Doing this
helps to clean the code up a bit and makes it more readable as all the
verification is now done in one function.
Lastly we can relocate the verification to the end of the run_test since it
is logically part of the test itself. With this we can drop the need for a
return value from run_test since verification becomes the last step of the
call and then immediately following is the tear down of the test setup.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/160443930408.1086697.16101205859962113000.stgit@localhost.localdomain
Drop the tcp_client/server.py files in favor of using a client and server
thread within the test case. Specifically we spawn a new thread to play the
role of the server, and the main testing thread plays the role of client.
Add logic to the end of the run_test function to guarantee that the sockets
are closed when we begin verifying results.
Doing this we are able to reduce overhead since we don't have two python
workers possibly floating around. In addition we don't have to worry about
synchronization issues and as such the retry loop waiting for the threads
to close the sockets can be dropped as we will have already closed the
sockets in the local executable and synchronized the server thread.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160443929638.1086697.2430242340980315521.stgit@localhost.localdomain
Recently a bug was missed due to the fact that test_tcpbpf_user is not a
part of test_progs. In order to prevent similar issues in the future move
the test functionality into test_progs. By doing this we can make certain
that it is a part of standard testing and will not be overlooked.
As a part of moving the functionality into test_progs it is necessary to
integrate with the test_progs framework and to drop any redundant code.
This patch:
1. Cleans up the include headers
2. Dropped a duplicate definition of bpf_find_map
3. Switched over to using test_progs specific cgroup functions
4. Renamed main to test_tcpbpf_user
5. Dropped return value in favor of CHECK_FAIL to check for errors
The general idea is that I wanted to keep the changes as small as possible
while moving the file into the test_progs framework. The follow-on patches
are meant to clean up the remaining issues such as the use of CHECK_FAIL.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/160443928881.1086697.17661359319919165370.stgit@localhost.localdomain
Pull documentation build warning fixes from Jonathan Corbet:
"This contains a series of warning fixes from Mauro; once applied, the
number of warnings from the once-noisy docs build process is nearly
zero.
Getting to this point has required a lot of work; once there,
hopefully we can keep things that way.
I have packaged this as a separate pull because it does a fair amount
of reaching outside of Documentation/. The changes are all in comments
and in code placement. It's all been in linux-next since last week"
* tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits)
docs: SafeSetID: fix a warning
amdgpu: fix a few kernel-doc markup issues
selftests: kselftest_harness.h: fix kernel-doc markups
drm: amdgpu_dm: fix a typo
gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups
drm: amdgpu: kernel-doc: update some adev parameters
docs: fs: api-summary.rst: get rid of kernel-doc include
IB/srpt: docs: add a description for cq_size member
locking/refcount: move kernel-doc markups to the proper place
docs: lockdep-design: fix some warning issues
MAINTAINERS: fix broken doc refs due to yaml conversion
ice: docs fix a devlink info that broke a table
crypto: sun8x-ce*: update entries to its documentation
net: phy: remove kernel-doc duplication
mm: pagemap.h: fix two kernel-doc markups
blk-mq: docs: add kernel-doc description for a new struct member
docs: userspace-api: add iommu.rst to the index file
docs: hwmon: mp2975.rst: address some html build warnings
docs: net: statistics.rst: remove a duplicated kernel-doc
docs: kasan.rst: add two missing blank lines
...
