Johannes Berg says:
====================
More updates:
* many minstrel improvements, including removal of the old
minstrel in favour of minstrel_ht
* speed improvements on FQ
* support for RX decapsulation (header conversion) offload
* RTNL reduction: limit RTNL usage in the wireless stack
mostly to where really needed (regulatory not yet) to
reduce contention on it
* tag 'mac80211-next-for-net-next-2021-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (24 commits)
mac80211: minstrel_ht: fix regression in the max_prob_rate fix
virt_wifi: fix deadlock on RTNL
cfg80211: avoid holding the RTNL when calling the driver
cfg80211: change netdev registration/unregistration semantics
mac80211: minstrel_ht: fix rounding error in throughput calculation
mac80211: minstrel_ht: increase stats update interval
mac80211: minstrel_ht: fix max probability rate selection
mac80211: minstrel_ht: improve sample rate selection
mac80211: minstrel_ht: improve ampdu length estimation
mac80211: minstrel_ht: remove old ewma based rate average code
mac80211: remove legacy minstrel rate control
mac80211: minstrel_ht: add support for OFDM rates on non-HT clients
mac80211: minstrel_ht: clean up CCK code
mac80211: introduce aql_enable node in debugfs
cfg80211: Add phyrate conversion support for extended MCS in 60GHz band
cfg80211: add VHT rate entries for MCS-10 and MCS-11
mac80211: reduce peer HE MCS/NSS to own capabilities
mac80211: remove NSS number of 160MHz if not support 160MHz for HE
mac80211_hwsim: add 6GHz channels
mac80211: add LDPC encoding to ieee80211_parse_tx_radiotap
...
====================
Link: https://lore.kernel.org/r/20210127210915.135550-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At the moment, BPF_CGROUP_INET{4,6}_BIND hooks can rewrite user_port
to the privileged ones (< ip_unprivileged_port_start), but it will
be rejected later on in the __inet_bind or __inet6_bind.
Let's add another return value to indicate that CAP_NET_BIND_SERVICE
check should be ignored. Use the same idea as we currently use
in cgroup/egress where bit #1 indicates CN. Instead, for
cgroup/bind{4,6}, bit #1 indicates that CAP_NET_BIND_SERVICE should
be bypassed.
v5:
- rename flags to be less confusing (Andrey Ignatov)
- rework BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY to work on flags
and accept BPF_RET_SET_CN (no behavioral changes)
v4:
- Add missing IPv6 support (Martin KaFai Lau)
v3:
- Update description (Martin KaFai Lau)
- Fix capability restore in selftest (Martin KaFai Lau)
v2:
- Switch to explicit return code (Martin KaFai Lau)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20210127193140.3170382-1-sdf@google.com
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Honor stateful expressions defined in the set from the dynset
extension. The set definition provides a stateful expression
that must be used by the dynset expression in case it is specified.
2) Missing timeout extension in the set element in the dynset
extension leads to inconsistent ruleset listing, not allowing
the user to restore timeout and expiration on ruleset reload.
3) Do not dump the stateful expression from the dynset extension
if it coming from the set definition.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nft_dynset: dump expressions when set definition contains no expressions
netfilter: nft_dynset: add timeout extension to template
netfilter: nft_dynset: honor stateful expressions in set definition
====================
Link: https://lore.kernel.org/r/20210127132512.5472-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This new function combines the netlink register attribute parser
and the store validation function.
This update requires to replace:
enum nft_registers dreg:8;
in many of the expression private areas otherwise compiler complains
with:
error: cannot take address of bit-field ‘dreg’
when passing the register field as reference.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This new function combines the netlink register attribute parser
and the load validation function.
This update requires to replace:
enum nft_registers sreg:8;
in many of the expression private areas otherwise compiler complains
with:
error: cannot take address of bit-field ‘sreg’
when passing the register field as reference.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For IPv4, default route is learned via DHCPv4 and user is allowed to change
metric using config etc/network/interfaces. But for IPv6, default route can
be learned via RA, for which, currently a fixed metric value 1024 is used.
Ideally, user should be able to configure metric on default route for IPv6
similar to IPv4. This patch adds sysctl for the same.
Logs:
For IPv4:
Config in etc/network/interfaces:
auto eth0
iface eth0 inet dhcp
metric 4261413864
IPv4 Kernel Route Table:
$ ip route list
default via 172.21.47.1 dev eth0 metric 4261413864
FRR Table, if a static route is configured:
[In real scenario, it is useful to prefer BGP learned default route over DHCPv4 default route.]
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
> - selected route, * - FIB route
S>* 0.0.0.0/0 [20/0] is directly connected, eth0, 00:00:03
K 0.0.0.0/0 [254/1000] via 172.21.47.1, eth0, 6d08h51m
i.e. User can prefer Default Router learned via Routing Protocol in IPv4.
Similar behavior is not possible for IPv6, without this fix.
After fix [for IPv6]:
sudo sysctl -w net.ipv6.conf.eth0.net.ipv6.conf.eth0.ra_defrtr_metric=1996489705
IP monitor: [When IPv6 RA is received]
default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705 pref high
Kernel IPv6 routing table
$ ip -6 route list
default via fe80::be16:65ff:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 21sec hoplimit 64 pref high
FRR Table, if a static route is configured:
[In real scenario, it is useful to prefer BGP learned default route over IPv6 RA default route.]
Codes: K - kernel route, C - connected, S - static, R - RIPng,
O - OSPFv3, I - IS-IS, B - BGP, N - NHRP, T - Table,
v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
> - selected route, * - FIB route
S>* ::/0 [20/0] is directly connected, eth0, 00:00:06
K ::/0 [119/1001] via fe80::xx16:xxxx:feb3:ce8e, eth0, 6d07h43m
If the metric is changed later, the effect will be seen only when next IPv6
RA is received, because the default route must be fully controlled by RA msg.
Below metric is changed from 1996489705 to 1996489704.
$ sudo sysctl -w net.ipv6.conf.eth0.ra_defrtr_metric=1996489704
net.ipv6.conf.eth0.ra_defrtr_metric = 1996489704
IP monitor:
[On next IPv6 RA msg, Kernel deletes prev route and installs new route with updated metric]
Deleted default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 3sec hoplimit 64 pref high
default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489704 pref high
Signed-off-by: Praveen Chaudhary <pchaudhary@linkedin.com>
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210125214430.24079-1-pchaudhary@linkedin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the lapb module, the timers may run concurrently with other code in
this module, and there is currently no locking to prevent the code from
racing on "struct lapb_cb". This patch adds locking to prevent racing.
1. Add "spinlock_t lock" to "struct lapb_cb"; Add "spin_lock_bh" and
"spin_unlock_bh" to APIs, timer functions and notifier functions.
2. Add "bool t1timer_stop, t2timer_stop" to "struct lapb_cb" to make us
able to ask running timers to abort; Modify "lapb_stop_t1timer" and
"lapb_stop_t2timer" to make them able to abort running timers;
Modify "lapb_t2timer_expiry" and "lapb_t1timer_expiry" to make them
abort after they are stopped by "lapb_stop_t1timer", "lapb_stop_t2timer",
and "lapb_start_t1timer", "lapb_start_t2timer".
3. Let lapb_unregister wait for other API functions and running timers
to stop.
4. The lapb_device_event function calls lapb_disconnect_request. In
order to avoid trying to hold the lock twice, add a new function named
"__lapb_disconnect_request" which assumes the lock is held, and make
it called by lapb_disconnect_request and lapb_device_event.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20210126040939.69995-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, _everything_ in cfg80211 holds the RTNL, and if you
have a slow USB device (or a few) you can get some bad lock
contention on that.
Fix that by re-adding a mutex to each wiphy/rdev as we had at
some point, so we have locking for the wireless_dev lists and
all the other things in there, and also so that drivers still
don't have to worry too much about it (they still won't get
parallel calls for a single device).
Then, we can restrict the RTNL to a few cases where we add or
remove interfaces and really need the added protection. Some
of the global list management still also uses the RTNL, since
we need to have it anyway for netdev management, but we only
hold the RTNL for very short periods of time here.
Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a placeholder field to calculate hash tuple offset. Similar to
2c407aca64 ("netfilter: conntrack: avoid gcc-10 zero-length-bounds
warning").
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Bluetooth Core Specification v5.2, Vol. 3, Part A, section 1.4, table
1.1:
'Start Fragments always either begin with the first octet of the Basic
L2CAP header of a PDU or they have a length of zero (see [Vol 2] Part
B, Section 6.6.2).'
Apparently this was changed by the following errata:
https://www.bluetooth.org/tse/errata_view.cfm?errata_id=10216
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This adds logic to disable and reenable advertisement filters during
suspend and resume. After this patch, we would only receive packets from
devices in allow list during suspend.
Signed-off-by: Howard Chung <howardchung@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Enables advertising monitor offloading to the controller, if MSFT
extension is supported. The kernel won't adjust the monitor parameters
to match what the controller supports - that is the user space's
responsibility.
This patch only manages the addition of monitors. Monitor removal is
going to be handled by another patch.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Yun-Hao Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
MSFT needs rssi parameter for monitoring advertisement packet,
therefore we should supply them from mgmt. This adds a new opcode
to add advertisement monitor with rssi parameters.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Yun-Hao Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Upon receiving a cumulative ACK that changes the congestion state from
Disorder to Open, the TLP timer is not set. If the sender is app-limited,
it can only wait for the RTO timer to expire and retransmit.
The reason for this is that the TLP timer is set before the congestion
state changes in tcp_ack(), so we delay the time point of calling
tcp_set_xmit_timer() until after tcp_fastretrans_alert() returns and
remove the FLAG_SET_XMIT_TIMER from ack_flag when the RACK reorder timer
is set.
This commit has two additional benefits:
1) Make sure to reset RTO according to RFC6298 when receiving ACK, to
avoid spurious RTO caused by RTO timer early expires.
2) Reduce the xmit timer reschedule once per ACK when the RACK reorder
timer is set.
Fixes: df92c8394e ("tcp: fix xmit timer to only be reset if data ACKed/SACKed")
Link: https://lore.kernel.org/netdev/1611311242-6675-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1611464834-23030-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TCP_USER_TIMEOUT is checked by the 0-window probe timer. As the
timer has backoff with a max interval of about two minutes, the
actual timeout for TCP_USER_TIMEOUT can be off by up to two minutes.
In this patch the TCP_USER_TIMEOUT is made more accurate by taking it
into account when computing the timer value for the 0-window probes.
This patch is similar to and builds on top of the one that made
TCP_USER_TIMEOUT accurate for RTOs in commit b701a99e43 ("tcp: Add
tcp_clamp_rto_to_user_timeout() helper to improve accuracy").
Fixes: 9721e709fa ("tcp: simplify window probe aborting on USER_TIMEOUT")
Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210122191306.GA99540@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The switch ASIC has a limited capacity of physical ('flavour physical'
in devlink terminology) ports that it can support. While each system is
brought up with a different number of ports, this number can be
increased via splitting up to the ASIC's limit.
Expose physical ports as a devlink resource so that user space will have
visibility to the maximum number of ports that can be supported and the
current occupancy.
In addition, add a "Generic Resources" section in devlink-resource
documentation so the different drivers will be aligned by the same resource
name when exposing to user space.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
HTB doesn't scale well because of contention on a single lock, and it
also consumes CPU. This patch adds support for offloading HTB to
hardware that supports hierarchical rate limiting.
In the offload mode, HTB passes control commands to the driver using
ndo_setup_tc. The driver has to replicate the whole hierarchy of classes
and their settings (rate, ceil) in the NIC. Every modification of the
HTB tree caused by the admin results in ndo_setup_tc being called.
After this setup, the HTB algorithm is done completely in the NIC. An SQ
(send queue) is created for every leaf class and attached to the
hierarchy, so that the NIC can calculate and obey aggregated rate
limits, too. In the future, it can be changed, so that multiple SQs will
back a single leaf class.
ndo_select_queue is responsible for selecting the right queue that
serves the traffic class of each packet.
The data path works as follows: a packet is classified by clsact, the
driver selects a hardware queue according to its class, and the packet
is enqueued into this queue's qdisc.
This solution addresses two main problems of scaling HTB:
1. Contention by flow classification. Currently the filters are attached
to the HTB instance as follows:
# tc filter add dev eth0 parent 1:0 protocol ip flower dst_port 80
classid 1:10
It's possible to move classification to clsact egress hook, which is
thread-safe and lock-free:
# tc filter add dev eth0 egress protocol ip flower dst_port 80
action skbedit priority 1:10
This way classification still happens in software, but the lock
contention is eliminated, and it happens before selecting the TX queue,
allowing the driver to translate the class to the corresponding hardware
queue in ndo_select_queue.
Note that this is already compatible with non-offloaded HTB and doesn't
require changes to the kernel nor iproute2.
2. Contention by handling packets. HTB is not multi-queue, it attaches
to a whole net device, and handling of all packets takes the same lock.
When HTB is offloaded, it registers itself as a multi-queue qdisc,
similarly to mq: HTB is attached to the netdev, and each queue has its
own qdisc.
Some features of HTB may be not supported by some particular hardware,
for example, the maximum number of classes may be limited, the
granularity of rate and ceil parameters may be different, etc. - so, the
offload is not enabled by default, a new parameter is used to enable it:
# tc qdisc replace dev eth0 root handle 1: htb offload
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a following commit, sch_htb will start using extack in the delete
class operation to pass hardware errors in offload mode. This commit
prepares for that by adding the extack parameter to this callback and
converting usage of the existing qdiscs.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing qdiscs that set TCQ_F_MQROOT don't use sch_tree_lock.
However, hardware-offloaded HTB will start setting this flag while also
using sch_tree_lock.
The current implementation of sch_tree_lock basically locks on
qdisc->dev_queue->qdisc, and it works fine when the tree is attached to
some queue. However, it's not the case for MQROOT qdiscs: such a qdisc
is the root itself, and its dev_queue just points to queue 0, while not
actually being used, because there are real per-queue qdiscs.
This patch changes the logic of sch_tree_lock and sch_tree_unlock to
lock the qdisc itself if it's the MQROOT.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink port function can be in active or inactive state.
Allow users to get and set port function's state.
When the port function it activated, its operational state may change
after a while when the device is created and driver binds to it.
Similarly on deactivation flow.
To clearly describe the state of the port function and its device's
operational state in the host system, define state and opstate
attributes.
Example of a PCI SF port which supports a port function:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
pci/0000:08:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
$ devlink port show pci/0000:06:00.0/32768
pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:88:88 state inactive opstate detached
$ devlink port function set pci/0000:06:00.0/32768 hw_addr 00:00:00:00:88:88 state active
$ devlink port show pci/0000:06:00.0/32768 -jp
{
"port": {
"pci/0000:06:00.0/32768": {
"type": "eth",
"netdev": "ens2f0npf0sf88",
"flavour": "pcisf",
"controller": 0,
"pfnum": 0,
"sfnum": 88,
"external": false,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:88:88",
"state": "active",
"opstate": "attached"
}
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Extended devlink interface for the user to add and delete a port.
Extend devlink to connect user requests to driver to add/delete
a port in the device.
Driver routines are invoked without holding devlink instance lock.
This enables driver to perform several devlink objects registration,
unregistration such as (port, health reporter, resource etc) by using
existing devlink APIs.
This also helps to uniformly use the code for port unregistration
during driver unload and during port deletion initiated by user.
Examples of add, show and delete commands:
$ devlink dev eswitch set pci/0000:06:00.0 mode switchdev
$ devlink port show
pci/0000:06:00.0/65535: type eth netdev ens2f0np0 flavour physical port 0 splittable false
$ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88
pci/0000:06:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
$ devlink port show pci/0000:06:00.0/32768
pci/0000:06:00.0/32768: type eth netdev eth6 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
$ udevadm test-builtin net_id /sys/class/net/eth6
Load module index
Parsed configuration file /usr/lib/systemd/network/99-default.link
Created link configuration context.
Using default interface naming scheme 'v245'.
ID_NET_NAMING_SCHEME=v245
ID_NET_NAME_PATH=enp6s0f0npf0sf88
ID_NET_NAME_SLOT=ens2f0npf0sf88
Unload module index
Unloaded link configuration context.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
A PCI sub-function (SF) represents a portion of the device similar
to PCI VF.
In an eswitch, PCI SF may have port which is normally represented
using a representor netdevice.
To have better visibility of eswitch port, its association with SF,
and its representor netdevice, introduce a PCI SF port flavour.
When devlink port flavour is PCI SF, fill up PCI SF attributes of the
port.
Extend port name creation using PCI PF and SF number scheme on best
effort basis, so that vendor drivers can skip defining their own
scheme.
This is done as cApfNSfM, where A, N and M are controller, PCI PF and
PCI SF number respectively.
This is similar to existing naming for PCI PF and PCI VF ports.
An example view of a PCI SF port:
$ devlink port show pci/0000:06:00.0/32768
pci/0000:06:00.0/32768: type eth netdev ens2f0npf0sf88 flavour pcisf controller 0 pfnum 0 sfnum 88 external false splittable false
function:
hw_addr 00:00:00:00:88:88 state active opstate attached
$ devlink port show pci/0000:06:00.0/32768 -jp
{
"port": {
"pci/0000:06:00.0/32768": {
"type": "eth",
"netdev": "ens2f0npf0sf88",
"flavour": "pcisf",
"controller": 0,
"pfnum": 0,
"sfnum": 88,
"splittable": false,
"function": {
"hw_addr": "00:00:00:00:88:88",
"state": "active",
"opstate": "attached"
}
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
We used to not require anything in terms of registering netdevs
with cfg80211, using a netdev notifier instead. However, in the
next patch reducing RTNL locking, this causes big problems, and
the simplest way is to just require drivers to do things better.
Change the registration/unregistration semantics to require the
drivers to call cfg80211_(un)register_netdevice() when this is
happening due to a cfg80211 request, i.e. add_virtual_intf() or
del_virtual_intf() (or if it somehow has to happen in any other
cfg80211 callback).
Otherwise, in other contexts, drivers may continue to use the
normal netdev (un)registration functions as usual.
Internally, we still use the netdev notifier and track (by the
new wdev->registered bool) if the wdev had already been added
to cfg80211 or not.
Link: https://lore.kernel.org/r/20210122161942.cf2f4b65e4e9.Ida8234e50da13eb675b557bac52a713ad4eddf71@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This allows drivers to pass 802.3 frames to mac80211, with some restrictions:
- the skb must be passed with a valid sta
- fast-rx needs to be active for the sta
- monitor mode needs to be disabled
mac80211 will tell the driver when it is safe to enable rx decap offload for
a particular station.
In order to implement support, a driver must:
- call ieee80211_hw_set(hw, SUPPORTS_RX_DECAP_OFFLOAD)
- implement ops->sta_set_decap_offload
- mark 802.3 frames with RX_FLAG_8023
If it doesn't want to enable offload for some vif types, it can mask out
IEEE80211_OFFLOAD_DECAP_ENABLED in vif->offload_flags from within the
.add_interface or .update_vif_offload driver ops
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201218184718.93650-6-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A sorted flow list is only needed to drop packets in the biggest flow when
hitting the overmemory condition.
By scanning flows only when needed, we can avoid paying the cost of
maintaining the list under normal conditions
In order to avoid scanning lots of empty flows and touching too many cold
cache lines, a bitmap of flows with backlog is maintained
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201218184718.93650-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add custom implementation of getsockopt hook for TCP_ZEROCOPY_RECEIVE.
We skip generic hooks for TCP_ZEROCOPY_RECEIVE and have a custom
call in do_tcp_getsockopt using the on-stack data. This removes
3% overhead for locking/unlocking the socket.
Without this patch:
3.38% 0.07% tcp_mmap [kernel.kallsyms] [k] __cgroup_bpf_run_filter_getsockopt
|
--3.30%--__cgroup_bpf_run_filter_getsockopt
|
--0.81%--__kmalloc
With the patch applied:
0.52% 0.12% tcp_mmap [kernel.kallsyms] [k] __cgroup_bpf_run_filter_getsockopt_kern
Note, exporting uapi/tcp.h requires removing netinet/tcp.h
from test_progs.h because those headers have confliciting
definitions.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210115163501.805133-2-sdf@google.com
Conflicts:
drivers/net/can/dev.c
commit 03f16c5075 ("can: dev: can_restart: fix use after free bug")
commit 3e77f70e73 ("can: dev: move driver related infrastructure into separate subdir")
Code move.
drivers/net/dsa/b53/b53_common.c
commit 8e4052c32d ("net: dsa: b53: fix an off by one in checking "vlan->vid"")
commit b7a9e0da2d ("net: switchdev: remove vid_begin -> vid_end range from VLAN objects")
Field rename.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous commit 32efcc06d2 ("tcp: export count for rehash attempts")
would mis-account rehashing SNMP and socket stats:
a. During handshake of an active open, only counts the first
SYN timeout
b. After handshake of passive and active open, stop updating
after (roughly) TCP_RETRIES1 recurring RTOs
c. After the socket aborts, over count timeout_rehash by 1
This patch fixes this by checking the rehash result from sk_rethink_txhash.
Fixes: 32efcc06d2 ("tcp: export count for rehash attempts")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20210119192619.1848270-1-ycheng@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following the description in previous patch (for TX):
As the bond interface is being bypassed by the TLS module, interacting
directly against the lower devs, there is no way for the bond interface
to disable its device offload capabilities, as long as the mode/policy
config allows it.
Hence, the feature flag is not directly controllable, but just reflects
the offload status based on the logic under bond_sk_check().
Here we just declare RX device offload support, and expose it via the
NETIF_F_HW_TLS_RX flag.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement TLS TX device offload for bonding interfaces.
This allows kTLS sockets running on a bond to benefit from the
device offload on capable lower devices.
To allow a simple and fast maintenance of the TLS context in SW and
lower devices, we bind the TLS socket to a specific lower dev.
To achieve a behavior similar to SW kTLS, we support only balance-xor
and 802.3ad modes, with xmit_hash_policy=layer3+4. This is enforced
in bond_sk_check(), done in a previous patch.
For the above configuration, the SW implementation keeps picking the
same exact lower dev for all the socket's SKBs. The device offload
behaves similarly, making the decision once at the connection creation.
Per socket, the TLS module should work directly with the lowest netdev
in chain, to call the tls_dev_ops operations.
As the bond interface is being bypassed by the TLS module, interacting
directly against the lower devs, there is no way for the bond interface
to disable its device offload capabilities, as long as the mode/policy
config allows it.
Hence, the feature flag is not directly controllable, but just reflects
the current offload status based on the logic under bond_sk_check().
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add ndo_sk_get_lower_dev() implementation for bond interfaces.
Support only for the cases where the socket's and SKBs' hash
yields identical value for the whole connection lifetime.
Here we restrict it to L3+4 sockets only, with
xmit_hash_policy==LAYER34 and bond modes xor/802.3ad.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcf_action_init_1() loads tc action modules automatically with
request_module() after parsing the tc action names, and it drops RTNL
lock and re-holds it before and after request_module(). This causes a
lot of troubles, as discovered by syzbot, because we can be in the
middle of batch initializations when we create an array of tc actions.
One of the problem is deadlock:
CPU 0 CPU 1
rtnl_lock();
for (...) {
tcf_action_init_1();
-> rtnl_unlock();
-> request_module();
rtnl_lock();
for (...) {
tcf_action_init_1();
-> tcf_idr_check_alloc();
// Insert one action into idr,
// but it is not committed until
// tcf_idr_insert_many(), then drop
// the RTNL lock in the _next_
// iteration
-> rtnl_unlock();
-> rtnl_lock();
-> a_o->init();
-> tcf_idr_check_alloc();
// Now waiting for the same index
// to be committed
-> request_module();
-> rtnl_lock()
// Now waiting for RTNL lock
}
rtnl_unlock();
}
rtnl_unlock();
This is not easy to solve, we can move the request_module() before
this loop and pre-load all the modules we need for this netlink
message and then do the rest initializations. So the loop breaks down
to two now:
for (i = 1; i <= TCA_ACT_MAX_PRIO && tb[i]; i++) {
struct tc_action_ops *a_o;
a_o = tc_action_load_ops(name, tb[i]...);
ops[i - 1] = a_o;
}
for (i = 1; i <= TCA_ACT_MAX_PRIO && tb[i]; i++) {
act = tcf_action_init_1(ops[i - 1]...);
}
Although this looks serious, it only has been reported by syzbot, so it
seems hard to trigger this by humans. And given the size of this patch,
I'd suggest to make it to net-next and not to backport to stable.
This patch has been tested by syzbot and tested with tdc.py by me.
Fixes: 0fedc63fad ("net_sched: commit action insertions together")
Reported-and-tested-by: syzbot+82752bc5331601cf4899@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+b3b63b6bff456bd95294@syzkaller.appspotmail.com
Reported-by: syzbot+ba67b12b1ca729912834@syzkaller.appspotmail.com
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20210117005657.14810-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TCP session does not terminate with TCP_USER_TIMEOUT when data
remain untransmitted due to zero window.
The number of unanswered zero-window probes (tcp_probes_out) is
reset to zero with incoming acks irrespective of the window size,
as described in tcp_probe_timer():
RFC 1122 4.2.2.17 requires the sender to stay open indefinitely
as long as the receiver continues to respond probes. We support
this by default and reset icsk_probes_out with incoming ACKs.
This counter, however, is the wrong one to be used in calculating the
duration that the window remains closed and data remain untransmitted.
Thanks to Jonathan Maxwell <jmaxwell37@gmail.com> for diagnosing the
actual issue.
In this patch a new timestamp is introduced for the socket in order to
track the elapsed time for the zero-window probes that have not been
answered with any non-zero window ack.
Fixes: 9721e709fa ("tcp: simplify window probe aborting on USER_TIMEOUT")
Reported-by: William McCall <william.mccall@gmail.com>
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210115223058.GA39267@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the set definition contains stateful expressions, allocate them for
the newly added entries from the packet path.
Fixes: 65038428b2 ("netfilter: nf_tables: allow to specify stateful expression in set definition")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Switches that care about QoS might have hardware support for reserving
buffer pools for individual ports or traffic classes, and configuring
their sizes and thresholds. Through devlink-sb (shared buffers), this is
all configurable, as well as their occupancy being viewable.
Add the plumbing in DSA for these operations.
Individual drivers still need to call devlink_sb_register() with the
shared buffers they want to expose. A helper was not created in DSA for
this purpose (unlike, say, dsa_devlink_params_register), since in my
opinion it does not bring any benefit over plainly calling
devlink_sb_register() directly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-01-16
1) Extend atomic operations to the BPF instruction set along with x86-64 JIT support,
that is, atomic{,64}_{xchg,cmpxchg,fetch_{add,and,or,xor}}, from Brendan Jackman.
2) Add support for using kernel module global variables (__ksym externs in BPF
programs) retrieved via module's BTF, from Andrii Nakryiko.
3) Generalize BPF stackmap's buildid retrieval and add support to have buildid
stored in mmap2 event for perf, from Jiri Olsa.
4) Various fixes for cross-building BPF sefltests out-of-tree which then will
unblock wider automated testing on ARM hardware, from Jean-Philippe Brucker.
5) Allow to retrieve SOL_SOCKET opts from sock_addr progs, from Daniel Borkmann.
6) Clean up driver's XDP buffer init and split into two helpers to init per-
descriptor and non-changing fields during processing, from Lorenzo Bianconi.
7) Minor misc improvements to libbpf & bpftool, from Ian Rogers.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits)
perf: Add build id data in mmap2 event
bpf: Add size arg to build_id_parse function
bpf: Move stack_map_get_build_id into lib
bpf: Document new atomic instructions
bpf: Add tests for new BPF atomic operations
bpf: Add bitwise atomic instructions
bpf: Pull out a macro for interpreting atomic ALU operations
bpf: Add instructions for atomic_[cmp]xchg
bpf: Add BPF_FETCH field / create atomic_fetch_add instruction
bpf: Move BPF_STX reserved field check into BPF_STX verifier code
bpf: Rename BPF_XADD and prepare to encode other atomics in .imm
bpf: x86: Factor out a lookup table for some ALU opcodes
bpf: x86: Factor out emission of REX byte
bpf: x86: Factor out emission of ModR/M for *(reg + off)
tools/bpftool: Add -Wall when building BPF programs
bpf, libbpf: Avoid unused function warning on bpf_tail_call_static
selftests/bpf: Install btf_dump test cases
selftests/bpf: Fix installation of urandom_read
selftests/bpf: Move generated test files to $(TEST_GEN_FILES)
selftests/bpf: Fix out-of-tree build
...
====================
Link: https://lore.kernel.org/r/20210116012922.17823-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for Arrow SpeedChips XRS700x single byte tag trailer. This
is modeled on tag_trailer.c which works in a similar way.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Monitor the following events and notify the driver when:
- A DSA port joins/leaves a LAG.
- A LAG, made up of DSA ports, joins/leaves a bridge.
- A DSA port in a LAG is enabled/disabled (enabled meaning
"distributing" in 802.3ad LACP terms).
When a LAG joins a bridge, the DSA subsystem will treat that as each
individual port joining the bridge. The driver may look at the port's
LAG device pointer to see if it is associated with any LAG, if that is
required. This is analogue to how switchdev events are replicated out
to all lower devices when reaching e.g. a LAG.
Drivers can optionally request that DSA maintain a linear mapping from
a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the
desired size.
In the event that the hardware is not capable of offloading a
particular LAG for any reason (the typical case being use of exotic
modes like broadcast), DSA will take a hands-off approach, allowing
the LAG to be formed as a pure software construct. This is reported
back through the extended ACK, but is otherwise transparent to the
user.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
