Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
A handful of drivers contains loops assigning the mac
addr byte by byte. Convert those to eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the following fallthrough warning:
drivers/pcmcia/db1xxx_ss.c:359:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
case 3:
^
drivers/pcmcia/db1xxx_ss.c:359:2: note: insert 'break;' to avoid fall-through
case 3:
^
break;
This helps with the ongoing efforts to globally enable
-Wimplicit-fallthrough for Clang.
Link: https://github.com/KSPP/linux/issues/115
Link: https://lore.kernel.org/linux-mm/202109030839.t2llsvmc-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
During the driver loading process, the 'dev' field was not assigned, but
the 'dev' field was referenced in the subsequent 'i82092aa_set_mem_map'
function.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
CC: <stable@vger.kernel.org>
[linux@dominikbrodowski.net: shorten commit message, add Cc to stable]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Fixes the following W=1 kernel build warning(s):
drivers/pcmcia/rsrc_nonstatic.c:349: warning: Function parameter or member 'value' not described in 'do_validate_mem'
drivers/pcmcia/rsrc_nonstatic.c:349: warning: Excess function parameter 'validate' description in 'do_validate_mem'
drivers/pcmcia/rsrc_nonstatic.c:407: warning: Function parameter or member 'value' not described in 'do_mem_probe'
drivers/pcmcia/rsrc_nonstatic.c:407: warning: Excess function parameter 'validate' description in 'do_mem_probe'
drivers/pcmcia/rsrc_nonstatic.c:407: warning: Excess function parameter 'fallback' description in 'do_mem_probe'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[linux@dominikbrodowski.net: removed list of CCs]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Fixes the following W=1 kernel build warning(s):
drivers/pcmcia/pcmcia_resource.c:160: warning: Function parameter or member 'p_dev' not described in 'pcmcia_access_config'
drivers/pcmcia/pcmcia_resource.c:160: warning: Function parameter or member 'where' not described in 'pcmcia_access_config'
drivers/pcmcia/pcmcia_resource.c:160: warning: Function parameter or member 'val' not described in 'pcmcia_access_config'
drivers/pcmcia/pcmcia_resource.c:160: warning: Function parameter or member 'accessf' not described in 'pcmcia_access_config'
drivers/pcmcia/pcmcia_resource.c:194: warning: Function parameter or member 'p_dev' not described in 'pcmcia_read_config_byte'
drivers/pcmcia/pcmcia_resource.c:194: warning: Function parameter or member 'where' not described in 'pcmcia_read_config_byte'
drivers/pcmcia/pcmcia_resource.c:194: warning: Function parameter or member 'val' not described in 'pcmcia_read_config_byte'
drivers/pcmcia/pcmcia_resource.c:207: warning: Function parameter or member 'p_dev' not described in 'pcmcia_write_config_byte'
drivers/pcmcia/pcmcia_resource.c:207: warning: Function parameter or member 'where' not described in 'pcmcia_write_config_byte'
drivers/pcmcia/pcmcia_resource.c:207: warning: Function parameter or member 'val' not described in 'pcmcia_write_config_byte'
drivers/pcmcia/pcmcia_resource.c:728: warning: Function parameter or member 'p_dev' not described in 'pcmcia_setup_isa_irq'
drivers/pcmcia/pcmcia_resource.c:728: warning: Function parameter or member 'type' not described in 'pcmcia_setup_isa_irq'
drivers/pcmcia/pcmcia_resource.c:793: warning: Function parameter or member 'p_dev' not described in 'pcmcia_setup_irq'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[linux@dominikbrodowski.net: removed list of CCs]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Fixes the following W=1 kernel build warning(s):
drivers/pcmcia/ds.c:96: warning: expecting prototype for pcmcia_store_new_id(). Prototype was for new_id_store() instead
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[linux@dominikbrodowski.net: removed list of CCs]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Fixes the following W=1 kernel build warning(s):
drivers/pcmcia/pcmcia_cis.c:129: warning: Function parameter or member 'flags' not described in 'pcmcia_io_cfg_data_width'
drivers/pcmcia/pcmcia_cis.c:154: warning: Function parameter or member 'tuple' not described in 'pcmcia_do_loop_config'
drivers/pcmcia/pcmcia_cis.c:154: warning: Function parameter or member 'parse' not described in 'pcmcia_do_loop_config'
drivers/pcmcia/pcmcia_cis.c:154: warning: Function parameter or member 'priv' not described in 'pcmcia_do_loop_config'
drivers/pcmcia/pcmcia_cis.c:300: warning: Function parameter or member 'tuple' not described in 'pcmcia_do_loop_tuple'
drivers/pcmcia/pcmcia_cis.c:300: warning: Function parameter or member 'parse' not described in 'pcmcia_do_loop_tuple'
drivers/pcmcia/pcmcia_cis.c:300: warning: Function parameter or member 'priv' not described in 'pcmcia_do_loop_tuple'
drivers/pcmcia/pcmcia_cis.c:351: warning: Function parameter or member 'p_dev' not described in 'pcmcia_do_get_tuple'
drivers/pcmcia/pcmcia_cis.c:351: warning: Function parameter or member 'tuple' not described in 'pcmcia_do_get_tuple'
drivers/pcmcia/pcmcia_cis.c:351: warning: Function parameter or member 'priv' not described in 'pcmcia_do_get_tuple'
drivers/pcmcia/pcmcia_cis.c:399: warning: Function parameter or member 'p_dev' not described in 'pcmcia_do_get_mac'
drivers/pcmcia/pcmcia_cis.c:399: warning: Function parameter or member 'tuple' not described in 'pcmcia_do_get_mac'
drivers/pcmcia/pcmcia_cis.c:399: warning: Function parameter or member 'priv' not described in 'pcmcia_do_get_mac'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[linux@dominikbrodowski.net: removed list of CCs]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Fixes the following W=1 kernel build warning(s):
drivers/pcmcia/cistpl.c:88: warning: Function parameter or member 's' not described in 'set_cis_map'
drivers/pcmcia/cistpl.c:88: warning: Function parameter or member 'card_offset' not described in 'set_cis_map'
drivers/pcmcia/cistpl.c:88: warning: Function parameter or member 'flags' not described in 'set_cis_map'
drivers/pcmcia/cistpl.c:136: warning: Function parameter or member 's' not described in 'pcmcia_read_cis_mem'
drivers/pcmcia/cistpl.c:136: warning: Function parameter or member 'attr' not described in 'pcmcia_read_cis_mem'
drivers/pcmcia/cistpl.c:136: warning: Function parameter or member 'addr' not described in 'pcmcia_read_cis_mem'
drivers/pcmcia/cistpl.c:136: warning: Function parameter or member 'len' not described in 'pcmcia_read_cis_mem'
drivers/pcmcia/cistpl.c:136: warning: Function parameter or member 'ptr' not described in 'pcmcia_read_cis_mem'
drivers/pcmcia/cistpl.c:217: warning: Function parameter or member 's' not described in 'pcmcia_write_cis_mem'
drivers/pcmcia/cistpl.c:217: warning: Function parameter or member 'attr' not described in 'pcmcia_write_cis_mem'
drivers/pcmcia/cistpl.c:217: warning: Function parameter or member 'addr' not described in 'pcmcia_write_cis_mem'
drivers/pcmcia/cistpl.c:217: warning: Function parameter or member 'len' not described in 'pcmcia_write_cis_mem'
drivers/pcmcia/cistpl.c:217: warning: Function parameter or member 'ptr' not described in 'pcmcia_write_cis_mem'
drivers/pcmcia/cistpl.c:289: warning: Function parameter or member 's' not described in 'read_cis_cache'
drivers/pcmcia/cistpl.c:289: warning: Function parameter or member 'attr' not described in 'read_cis_cache'
drivers/pcmcia/cistpl.c:289: warning: Function parameter or member 'addr' not described in 'read_cis_cache'
drivers/pcmcia/cistpl.c:289: warning: Function parameter or member 'len' not described in 'read_cis_cache'
drivers/pcmcia/cistpl.c:289: warning: Function parameter or member 'ptr' not described in 'read_cis_cache'
drivers/pcmcia/cistpl.c:372: warning: Function parameter or member 's' not described in 'verify_cis_cache'
drivers/pcmcia/cistpl.c:412: warning: Function parameter or member 's' not described in 'pcmcia_replace_cis'
drivers/pcmcia/cistpl.c:412: warning: Function parameter or member 'data' not described in 'pcmcia_replace_cis'
drivers/pcmcia/cistpl.c:412: warning: Function parameter or member 'len' not described in 'pcmcia_replace_cis'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[linux@dominikbrodowski.net: removed list of CCs]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Fixes the following W=1 kernel build warning(s):
drivers/pcmcia/rsrc_nonstatic.c:265: warning: Function parameter or member 's' not described in 'readable'
drivers/pcmcia/rsrc_nonstatic.c:265: warning: Function parameter or member 'res' not described in 'readable'
drivers/pcmcia/rsrc_nonstatic.c:265: warning: Function parameter or member 'count' not described in 'readable'
drivers/pcmcia/rsrc_nonstatic.c:296: warning: Function parameter or member 's' not described in 'checksum'
drivers/pcmcia/rsrc_nonstatic.c:296: warning: Function parameter or member 'res' not described in 'checksum'
drivers/pcmcia/rsrc_nonstatic.c:296: warning: Function parameter or member 'value' not described in 'checksum'
drivers/pcmcia/rsrc_nonstatic.c:349: warning: Function parameter or member 'value' not described in 'do_validate_mem'
drivers/pcmcia/rsrc_nonstatic.c:349: warning: Excess function parameter 'validate' description in 'do_validate_mem'
drivers/pcmcia/rsrc_nonstatic.c:407: warning: Function parameter or member 'value' not described in 'do_mem_probe'
drivers/pcmcia/rsrc_nonstatic.c:407: warning: Excess function parameter 'validate' description in 'do_mem_probe'
drivers/pcmcia/rsrc_nonstatic.c:407: warning: Excess function parameter 'fallback' description in 'do_mem_probe'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[linux@dominikbrodowski.net: removed list of CCs]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
pcmcia_device_remove() is only ever called by the driver core with
dev->driver pointing to a valid driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[linux@dominikbrodowski.net: shorten commit message, fix reference
to pcmcia_device_probe]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Pull pcmcia update from Dominik Brodowski:
"Improve the use of the kobj API in the core of the Linux PCMCIA
subsystem"
* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: Switch to using the new API kobj_to_dev()
fixed the following coccicheck:
drivers/pcmcia/cistpl.c:1557:54-55: WARNING opportunity for kobj_to_dev()
drivers/pcmcia/cistpl.c:1584:53-54: WARNING opportunity for kobj_to_dev()
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Pull pcmcia updates from Dominik Brodowski:
"Besides a few PCMCIA odd fixes, the NEC VRC4173 CARDU driver is
removed, as it has not compiled in ages"
* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: omap: Fix error return code in omap_cf_probe()
pcmcia: Remove NEC VRC4173 CARDU
pcmcia: db1xxx_ss: remove unneeded semicolon
pcmcia/electra_cf: Fix some return values in 'electra_cf_probe()' in case of error
Fix to return proper error code instaed of 0 in omap_cf_probe(), as done
elsewhere in this function.
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
The driver was introduced in 2.6.11 in the pre-git times with commit
"[PATCH] mips: vR41xx updates". However, even back then, this driver
was not able to be compiled, as a number of udpates had been missing
from this driver: It still provided a "->get_io_map" callback (removed
for v2.5.66) and a "->inquire_socket" callback and used socket_cap_t
(removed for v2.5.72). Moreover, this driver failed to be brought and
be kept up to date; e.g. it still provides '->register_callback',
incompatible with a change committed for v2.6.14 in
commit 7f316b033b ("[PATCH] pcmcia: remove socket register_callback"),
and uses INIT_WORK() with three arguments which was removed in
commit 65f27f3844 ("WorkStruct: Pass the work_struct pointer instead
of context data")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[linux@dominikbrodowski.net: rewrite commit message]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
'status' is known to be 0 at this point. It must be set to a meaningful
value in order to return an error code if one of the 'of_get_property()'
call fails.
Return -EINVAL in such a case.
Fixes: 2b571a066a2f("pcmcia: CompactFlash driver for PA Semi Electra boards")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
This value is only used by a PCMCIA driver and not very useful.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dominik Brodowski <linux@dominikbrodwski.net>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull pcmcia updates from Dominik Brodowski:
"Two minor PCMCIA odd fixes: one replacing zero-length arrays with a
flexible-array member, and one making a local function static"
* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: make pccard_loop_tuple() static
pcmcia: Replace zero-length array with flexible-array
pccard_loop_tuple() is only used within drivers/pcmcia/pcmcia_cis.c, so
make that function static.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
There are a few space characters I found by chance. I think they are
redundant, so I removed them.
Signed-off-by: Hu Haowen <xianfengting221@163.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
device_driver name is const char pointer, so it not useful to cast
driver_name (which is already const char).
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Remove the unused function indirect_read16, which
is similar to indirect_read with the exception that
it reads 16 instead of 8 bit.
Co-developed-by: Lukas Panzer <lukas.panzer@fau.de>
Signed-off-by: Lukas Panzer <lukas.panzer@fau.de>
Signed-off-by: Simon Geis <simon.geis@fau.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Align switch and case labels in order to improve readability.
For the same reason, change the indentation of an if-statement.
Co-developed-by: Lukas Panzer <lukas.panzer@fau.de>
Signed-off-by: Lukas Panzer <lukas.panzer@fau.de>
Signed-off-by: Simon Geis <simon.geis@fau.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Improve the readability by adding whitespaces after commas and around
comparative operations. Also change indentation of one comment block.
While at it, remove trailing whitespaces and spaces before tabs.
Co-developed-by: Lukas Panzer <lukas.panzer@fau.de>
Signed-off-by: Lukas Panzer <lukas.panzer@fau.de>
Signed-off-by: Simon Geis <simon.geis@fau.de>
[linux@dominikbrodowski.net: fixup one additional definition]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Improve the log output by using the device-aware dev_err()/dev_info()
functions. While at it, update one remaining printk(KERN_ERR ...) call
to the preferred pr_err() call and delete commented out debugging lines.
Co-developed-by: Lukas Panzer <lukas.panzer@fau.de>
Signed-off-by: Lukas Panzer <lukas.panzer@fau.de>
Signed-off-by: Simon Geis <simon.geis@fau.de>
[linux@dominikbrodowski.net: disapply unneeded part of patch]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
A recent cleanup patch removed the remaining users of dprintk() in
i82092.c, so get rid of the definition of dprintk() as well.
Fixes: 836e9494f4 ("pcmcia/i82092: Refactored dprintk macro for dev_dbg().")
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Include <pcmcia/ds.h> for pcmcia_parse_tuple declaration
to fix the following sparse warning:
drivers/pcmcia/cistpl.c:1287:5: warning: symbol 'pcmcia_parse_tuple' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Include cs_internal.h (and pcmcia/cistpl.h as required by
cs_internal.h) for the declearions of cb_alloc and cb_free
to silence the following sparse warnings:
drivers/pcmcia/cardbus.c:64:11: warning: symbol 'cb_alloc' was not declared. Should it be static?
drivers/pcmcia/cardbus.c:103:6: warning: symbol 'cb_free' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
