Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Read the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Read the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In mlx5_core and vdpa there is no use of mlx5_core_mkey members except
for the key itself.
As preparation for moving mlx5_core_mkey to mlx5_ib, the occurrences of
struct mlx5_core_mkey in all modules except for mlx5_ib are replaced by
a u32 key.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
mkey->size is already stored in ibmr->length, no need to store it here.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Permit offloading qdiscs below RED and TBF. In order to avoid having to
implement trivial propagating callbacks for get_prio_bitmap and
get_tclass_num, extend mlxsw_sp_qdisc_get_prio_bitmap() and
..._get_tclass_num() to handle the lack of the callback as a cue to forward
the request to the parent.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A following patch will enable offloading qdiscs that are deeper than
directly under root qdisc. Currently the topology validation consists of
demanding a root qdisc position for ETS and PRIO. Since RED and TBF are
considered classless, this is enough. In order to prevent some nonsensical
combinations when RED and TBF become classful, introduce a more general
topology validator.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On Spectrum, there are no per-TC TX counters. Instead, mlxsw uses per-prio
counters and aggregates them according to the priomap. Therefore when
priomap changes, the counter base values need to be reset to reflect the
change. Previously, this was only done for the sole child qdisc, but a
following patch makes RED and TBF classful. Thus apply the request to the
whole sub-tree.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Qdisc graft operations have so far been reported at PRIO, ETS and RED, with
RED events ignored, because RED was not considered a classful qdisc. A
following patch will make mlxsw recognize RED and TBF as classful qdiscs,
and thus it is necessary to validate grafting at these qdiscs as well.
Rename the existing graft validator to make it clear that it is a generic
function, and invoke for RED and TBF graft events as well. Drop the
unnecessary PRIO helper and invoke the graft validator directly for PRIO as
well.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently ETS and PRIO are the only offloaded classful qdiscs. Since they
are both similar, their destroy handler is the same, and it handles
children destruction itself. But now it is possible to do it generically
for any classful qdisc. Therefore promote the recursive destruction from
the ETS handler to mlxsw_sp_qdisc_destroy(), so that RED and TBF pick it up
in follow-up patches.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract from __mlxsw_sp_qdisc_ets_replace() two helpers for handling of one
future FIFO resp. reinitializing the array of future FIFOs.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when keeping track of qdiscs, mlxsw notes the TC and priomap
corresponding to each qdisc. That is fine currently, as there only ever is
one level of qdiscs to update: the direct children of ETS / PRIO. However
as deeper structures are made offloadable, ETS would need to update these
values for the complete subtree, and interim qdiscs would need to remember
to propagate the value.
Instead, reverse the responsibility: child qdiscs can ask their parent what
their TC and priomap are. ETS / PRIO know the answer right away, or there
are defaults for when the root qdisc does not assign them (e.g. when RED is
used as root qdisc). When RED and TBF become classful, they will simply
forward the request up to their parent.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed says:
mlx5-updates-2021-10-18
Maor Maor Gottlieb says:
========================
Use hash to select the affinity port in VF LAG
Current VF LAG architecture is based on QP association with a port.
QP must be created after LAG is enabled to allow association with non-native port.
VM Packets going on slow-path to eSwicth manager (SW path or hairpin) will be transmitted
through a different QP than the VM. This means that Different packets of the same flow might
egress from different physical ports.
This patch-set solves this issue by moving the port selection to be based on the hash function
defined by the bond.
When the device is moved to VF LAG mode, the driver creates TTC (traffic type classifier) flow
tables in order to classify the packet and steer it to the relevant hash function. Similar to what
is done in the mlx5 RSS implementation.
Each rule in the TTC table, forwards the packet to port selection flow table which has one hash
split flow group which contains two "catch all" flow table entries. Each entry point to the
relative uplink port. As shown below:
-------------------
| FT |
TTC rule -> | ----------- |
| FG| FTE --|-|-----> uplink of port #1
| | FTE --|-|-----> uplink of port #2
| ----------- |
-------------------
Hash split flow group is flow group that created as type of HASH_SPLIT and associated with match definer.
The match definer define the fields which included in the hash calculation.
The driver creates the match definer according to the xmit hash policy of the bond driver.
Patches overview:
========================
Minor E-Switch updates:
- Patch #12, dynamic allocation of dest array
- Patch #13, increase number of forward destinations to 32
Signed-off-by: David S. Miller <davem@davemloft.net>
Mateusz Palczewski says:
====================
40GbE Intel Wired LAN Driver Updates 2021-10-18
Use single state machine for driver initialization
and for service initialized driver. The init state
machine implemented in init_task() is merged
into the watchdog_task(). The init_task() function
is removed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Increase supported number of forward destinations in the same rule, local
and remote, from 2 to 32.
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use dynamic allocation for the dest array in preparation for
the next patch which increase MLX5_MAX_FLOW_FWD_VPORTS and
will cause stack allocation to be bigger than 1024 bytes.
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use the steering based solution for select the affinity port
when the LAG mode is based on hash policy and the device support
in port selection flow table.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add create function, build the steering tables, TTC and definers
according to the LAG hash type.
The destroy function, destroys all the steering components.
The modify functions is used when the bond mapping changes and it
iterates over all the rules in the definers and modifies them to steer
the packet to the relevant active ports.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support to create inner and outer TTC tables for LAG port
selection. These tables are used to classify the packets in
order to select the related definer.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Every definer will consist of a flow table with a single hash group
with exactly two flow table entries, one for each device port.
The destination of these entries is the uplink vport according to the
port state and hash policy.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Set the related bits in the match definer mask according to the
TT mapping.
This mask will be used to create the match definers.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Generate a traffic type bitmap that will define which
steering objects we need to create for the steering
based LAG.
Bits in this bitmap are set according to the LAG hash type.
In addition, have a field that indicate if the lag is in encap
mode or not.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Downstream patches add another lag related file so it makes
sense to have all the lag files in a dedicated directory.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The uplink destination type should be used in rules to steer the
packet to the uplink when the device is in steering based LAG mode.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Introduce new APIs to create and destroy flow matcher
for given format id.
Flow match definer object is used for defining the fields and
mask used for the hash calculation. User should mask the desired
fields like done in the match criteria.
This object is assigned to flow group of type hash. In this flow
group type, packets lookup is done based on the hash result.
This patch also adds the required bits to create such flow group.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add new port selection flow steering namespace. Flow steering rules in
this namespaceare are used to determine the physical port for egress
packets.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add bitmasks to ttc_params to indicate if rule is valid or not.
It will allow to create TTC table with support only in part of the
traffic types.
In later patches which introduce the steering based LAG port selection,
TTC will be created with only part of the rules according to the hash
type.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
A new warning in clang points out two places in this driver where
boolean expressions are being used with a bitwise OR instead of a
logical one:
drivers/net/ethernet/netronome/nfp/nfp_asm.c:199:20: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
reg->src_lmextn = swreg_lmextn(lreg) | swreg_lmextn(rreg);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
drivers/net/ethernet/netronome/nfp/nfp_asm.c:199:20: note: cast one or both operands to int to silence this warning
drivers/net/ethernet/netronome/nfp/nfp_asm.c:280:20: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
reg->src_lmextn = swreg_lmextn(lreg) | swreg_lmextn(rreg);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
drivers/net/ethernet/netronome/nfp/nfp_asm.c:280:20: note: cast one or both operands to int to silence this warning
2 errors generated.
The motivation for the warning is that logical operations short circuit
while bitwise operations do not. In this case, it does not seem like
short circuiting is harmful so implement the suggested fix of changing
to a logical operation to fix the warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/1479
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211018193101.2340261-1-nathan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit adds a new state, __IAVF_INIT_FAILED to the state machine.
From now on initialization functions report errors not by returning an
error value, but by changing the state to indicate that something went
wrong.
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Replace state changes of iavf state machine
with a method that also tracks the previous
state the machine was on.
This change is required for further work with
refactoring init and watchdog state machines.
Tracking of previous state would help us
recover iavf after failure has occurred.
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
mlx5_tout_ms() returns a u64, we can't directly divide it.
This is not a problem here, @timeout which is the value
that actually matters here is already a ulong, so this
implies storing return value of mlx5_tout_ms() on a ulong
should be fine.
This fixes:
ERROR: modpost: "__udivdi3" [drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko] undefined!
Fixes: 32def4120e ("net/mlx5: Read timeout values from DTOR")
Link: https://lore.kernel.org/r/20211018172608.1069754-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Everything except the first 32 bits was lost when the pause flags were
added. This makes the 50000baseCR2 mode flag (bit 34) not appear.
I have tested this with a 10G card (SFN5122F-R7) by modifying it to
return a non-legacy link mode (10000baseCR).
Signed-off-by: Erik Ekman <erik@kryo.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix delay settings applied to wrong cpu in parse_port_config. The delay
values is set to the wrong index as the cpu_port_index is incremented
too early. Start the cpu_port_index to -1 so the correct value is
applied to address also the case with invalid phy mode and not available
port.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS for net-next:
1) Add new run_estimation toggle to IPVS to stop the estimation_timer
logic, from Dust Li.
2) Relax superfluous dynset check on NFT_SET_TIMEOUT.
3) Add egress hook, from Lukas Wunner.
4) Nowadays, almost all hook functions in x_table land just call the hook
evaluation loop. Remove remaining hook wrappers from iptables and IPVS.
From Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The RTL8365MB-VC ethernet switch controller has 4 internal PHYs for its
user-facing ports. All that is needed is to let the PHY driver core
pick up the IRQ made available by the switch driver.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a realtek-smi subdriver for the RTL8365MB-VC 4+1 port
10/100/1000M switch controller. The driver has been developed based on a
GPL-licensed OS-agnostic Realtek vendor driver known as rtl8367c found
in the OpenWrt source tree.
Despite the name, the RTL8365MB-VC has an entirely different register
layout to the already-supported RTL8366RB ASIC. Notwithstanding this,
the structure of the rtl8365mb subdriver is loosely based on the rtl8366rb
subdriver. Like the 'rb, it establishes its own irqchip to handle
cascaded PHY link status interrupts.
The RTL8365MB-VC switch is capable of offloading a large number of
features from the software, but this patch introduces only the most
basic DSA driver functionality. The ports always function as standalone
ports, with bridging handled in software.
One more thing. Realtek's nomenclature for switches makes it hard to
know exactly what other ASICs might be supported by this driver. The
vendor driver goes by the name rtl8367c, but as far as I can tell, no
chip actually exists under this name. As such, the subdriver is named
rtl8365mb to emphasize the potentially limited support. But it is clear
from the vendor sources that a number of other more advanced switches
share a similar register layout, and further support should not be too
hard to add given access to the relevant hardware. With this in mind,
the subdriver has been written with as few assumptions about the
particular chip as is reasonable. But the RTL8365MB-VC is the only
hardware I have available, so some further work is surely needed.
Co-developed-by: Michael Rasmussen <mir@bang-olufsen.dk>
Signed-off-by: Michael Rasmussen <mir@bang-olufsen.dk>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix following coccicheck warning:
./drivers/net/ethernet/mscc/ocelot_vsc7514.c:946:1-33: WARNING: Function
for_each_available_child_of_node should have of_node_put() before goto.
Early exits from for_each_available_child_of_node should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix following coccicheck warning:
./drivers/net/ethernet/microchip/sparx5/s4parx5_main.c:723:1-33: WARNING: Function
for_each_available_child_of_node should have of_node_put() before goto
Early exits from for_each_available_child_of_node should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It seems that the PCIe+USB firmware (latest version 15.68.19.p21) of the
88W8897 card sometimes ignores or misses when we try to wake it up by
writing to the firmware status register. This leads to the firmware
wakeup timeout expiring and the driver resetting the card because we
assume the firmware has hung up or crashed.
Turns out that the firmware actually didn't hang up, but simply "missed"
our wakeup request and didn't send us an interrupt with an AWAKE event.
Trying again to read the firmware status register after a short timeout
usually makes the firmware wake up as expected, so add a small retry
loop to mwifiex_pm_wakeup_card() that looks at the interrupt status to
check whether the card woke up.
The number of tries and timeout lengths for this were determined
experimentally: The firmware usually takes about 500 us to wake up
after we attempt to read the status register. In some cases where the
firmware is very busy (for example while doing a bluetooth scan) it
might even miss our requests for multiple milliseconds, which is why
after 15 tries the waiting time gets increased to 10 ms. The maximum
number of tries it took to wake the firmware when testing this was
around 20, so a maximum number of 50 tries should give us plenty of
safety margin.
Here's a reproducer for those firmware wakeup failures I've found:
1) Make sure wifi powersaving is enabled (iw dev wlp1s0 set power_save on)
2) Connect to any wifi network (makes firmware go into wifi powersaving
mode, not deep sleep)
3) Make sure bluetooth is turned off (to ensure the firmware actually
enters powersave mode and doesn't keep the radio active doing bluetooth
stuff)
4) To confirm that wifi powersaving is entered ping a device on the LAN,
pings should be a few ms higher than without powersaving
5) Run "while true; do iwconfig; sleep 0.0001; done", this wakes and
suspends the firmware extremely often
6) Wait until things explode, for me it consistently takes <5 minutes
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=109681
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211011133224.15561-3-verdre@v0yd.nl
On the 88W8897 PCIe+USB card the firmware randomly crashes after setting
the TX ring write pointer. The issue is present in the latest firmware
version 15.68.19.p21 of the PCIe+USB card.
Those firmware crashes can be worked around by reading any PCI register
of the card after setting that register, so read the PCI_VENDOR_ID
register here. The reason this works is probably because we keep the bus
from entering an ASPM state for a bit longer, because that's what causes
the cards firmware to crash.
This fixes a bug where during RX/TX traffic and with ASPM L1 substates
enabled (the specific substates where the issue happens appear to be
platform dependent), the firmware crashes and eventually a command
timeout appears in the logs.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=109681
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211011133224.15561-2-verdre@v0yd.nl
