A new step has been added to the DP modeset sequences for all platforms
with display version 12 and beyond: if enabling DP MST with FEC, we
need to set a chicken bit before enabling the transcoder. The chicken
bit should be disabled again before disabling the transcoder (which we
can do unconditionally since it shouldn't be set anyway in non-MST
cases).
Bspec: 49190, 54128, 55424
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723170618.1477415-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Replace dma_buf_begin_cpu_access() with drm_gem_fb_begin_cpu_access();
same for _end_cpu_access(). Remove some boiler-plate code. No functional
changes.
There's one left-over reference to the imported attachment that we
keep. GEM BOs with imported attachment are considered uncached and
enables special handling within the drm_fb_swab().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210716140801.1215-4-tzimmermann@suse.de
Implement helpers drm_gem_fb_begin_cpu_access() and _end_cpu_access(),
which call the rsp dma-buf functions for all GEM BOs of the given
framebuffer.
Calls to dma_buf_end_cpu_access() can return an error code on failure,
while drm_gem_fb_end_cpu_access() does not. The latter runs during DRM's
atomic commit or during cleanup. Both cases don't allow for errors, so
leave out the return value.
v2:
* fix typo in docs (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210716140801.1215-2-tzimmermann@suse.de
Since we can't steer multicast register reads during ring-based
workaround verification, we need to define the multicast ranges where
failure to steer could potentially cause us to read back from a
fused-off register instance.
As with gen12, we can ignore the multicast ranges that the bspec
describes as 'SQIDI' since all instances of those registers will always
be present and we'll always be able to read back a workaround value that
was written with multicast.
Bspec: 66534
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714031540.3539704-11-matthew.d.roper@intel.com
In pass-through mode, after mode 1 reset, msix enablement status would
lost and never receives interrupt again. So, we should restore msix
status after mode 1 reset.
Signed-off-by: Chengzhe Liu <ChengZhe.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Sienna Cichlid, in pass-through mode, if we unload the driver in BACO
mode(RTPM), then the kernel would receive thousands of interrupts.
That's because there is doorbell monitor interrupt on BIF, so KVM keeps
injecting interrupts to the guest VM. So we should clear the doorbell
interrupt status after BACO exit.
v2: Modify coding style and commit message
Signed-off-by: Chengzhe Liu <ChengZhe.Liu@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes a bug which if we probe a non-existing
I2C device, and the SMU returns 0xFF, from then on
we can never communicate with the SMU, because the
code before this patch reads and interprets 0xFF
as a terminal error, and thus we never write 0
into register 90 to clear the status (and
subsequently send a new command to the SMU.)
It is not an error that the SMU returns status
0xFF. This means that the SMU executed the last
command successfully (execution status), but the
command result is an error of some sort (execution
result), depending on what the command was.
When doing a status check of the SMU, before we
send a new command, the only status which
precludes us from sending a new command is 0--the
SMU hasn't finished executing a previous command,
and 0xFC--the SMU is busy.
This bug was seen as the following line in the
kernel log,
amdgpu: Msg issuing pre-check failed(0xff) and SMU may be not in the right state!
when subsequent SMU commands, not necessarily
related to I2C, were sent to the SMU.
This patch fixes this bug.
v2: Add a comment to the description of
__smu_cmn_poll_stat() to explain why we're NOT
defining the SMU FW return codes as macros, but
are instead hard-coding them. Such a change, can
be followed up by a subsequent patch.
v3: The changes are,
a) Add comments to break labels in
__smu_cmn_reg2errno().
b) When an unknown/unspecified/undefined result is
returned back from the SMU, map that to
-EREMOTEIO, to distinguish failure at the SMU
FW.
c) Add kernel-doc to
smu_cmn_send_msg_without_waiting(),
smu_cmn_wait_for_response(),
smu_cmn_send_smc_msg_with_param().
d) In smu_cmn_send_smc_msg_with_param(), since we
wait for completion of the command, if the
result of the completion is
undefined/unknown/unspecified, we print that to
the kernel log.
v4: a) Add macros as requested, though redundant, to
be removed when SMU consolidates for all
ASICs--see comment in code.
b) Get out if the SMU code is unknown.
v5: Rename the macro names.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Fixes: fcb1fe9c9e ("drm/amd/powerplay: pre-check the SMU state before issuing message")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Asic cyan_skilfish2 won't support RLC autoload when using
front door loading. We just use PSP to load firmware like
gfx9 here.
So add autoload_supported flag check instead of just
checking firmware load type for RLC autoload.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Will switch to front door loading by default after this function is
stable.
v2: use APU flags (Alex)
Signed-off-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add psp v11.0.8 to ip block initialization.
v2: use APU flags (Alex)
Signed-off-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ip offset definition for cyan_skillfish and initialize it.
v2: squash in ip_offset updates (Alex)
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
