Adjust the link training code to accommodate per-lane drive settings,
if supported by the platform. Actually enabling this will involve
some changes to each platform's .set_signal_level() implementation,
so for the moment all supported platforms will keep using the current
codepath that just uses the same drive settings for all the lanes.
v2: Fix min() vs. max() fumble
v3: Compact the debug print to a single line
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-10-ville.syrjala@linux.intel.com
Replace uses of mem_encrypt_active() with calls to cc_platform_has() with
the CC_ATTR_MEM_ENCRYPT attribute.
Remove the implementation of mem_encrypt_active() across all arches.
For s390, since the default implementation of the cc_platform_has()
matches the s390 implementation of mem_encrypt_active(), cc_platform_has()
does not need to be implemented in s390 (the config option
ARCH_HAS_CC_PLATFORM is not set).
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-9-bp@alien8.de
Currently .set_signal_levels() is only used by encoders in DP mode.
For most modern platforms there is no essential difference between
DP and HDMI, and both codepaths just end up calling the same function
under the hood. Let's get remove the need for that extra indirection
by moving .set_signal_levels() into the encoder from intel_dp.
Since we already plumb the crtc_state/etc. into .set_signal_levels()
the code will do the right thing for both DP and HDMI.
HSW/BDW/SKL are the only platforms that need a bit of care on
account of having to preload the hardware buf_trans register
with the full set of values. So we must still remember to call
hsw_prepare_{dp,hdmi}_ddi_buffers() to do said preloading, and
.set_signal_levels() will just end up selecting the correct entry
for DP, and also setting up the iboost magic for both DP and HDMI.
Note that previously on HSW/BDW/SKL we did write to DDI_BUF_CTL to
select the correct entry until link training started, now that we
call .set_signal_levels() already from hsw_ddi_pre_enable_dp() that
is no longer the case. But it's all safe now that the
intel_ddi_init_dp_buf_reg() call was hoisted up and it no longer
sets up the DDI_BUF_CTL_ENABLE bit (that is still deferred until
link training).
v2: Rebase due to has_{iboost,buf_trans_select}()
Add some notes about the DDI_BUF_CTL situation on HSW/BDW/SKL (Imre)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001130107.1746-4-ville.syrjala@linux.intel.com
The DP spec says:
"If the receiver keeps the same value in the ADJUST_REQUEST_LANEx_y
register(s) while the LANEx_CR_DONE bits remain unset, the transmitter
must loop four times with the same voltage swing. On the fifth time,
the transmitter must down-shift to the lower bit rate and must repeat
the CR-lock training sequence as described below."
Lets fix the code to follow that instead of terminating after five
times of transmitting the same signal levels. The text in spec feels
a little bit ambiguous still, but this is my best guess at its meaning.
As a bonus this also gets rid of the train_set[0] stuff which
would not work for per-lane drive settings anyway.
Cc: Imre Deak <imre.deak@intel.com>
CC: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001160826.17080-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Using the generic extension from the previous patch, a specific multisync
extension enables more than one in/out binary syncobj per job submission.
Arrays of syncobjs are set in struct drm_v3d_multisync, that also cares
of determining the stage for sync (wait deps) according to the job
queue.
v2:
- subclass the generic extension struct (Daniel)
- simplify adding dependency conditions to make understandable (Iago)
v3:
- fix conditions to consider single or multiples in/out_syncs (Iago)
- remove irrelevant comment (Iago)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ffd8b2e3dd2e0c686db441a0c0a4a0181ff85328.1633016479.git.mwen@igalia.com
Add support to attach generic extensions on job submission. This patch
is third prep work to enable multiple syncobjs on job submission. With
this work, when the job submission interface needs to be extended to
accommodate a new feature, we will use a generic extension struct where
an id determines the data type to be pointed. The first application is
to enable multiples in/out syncobj (next patch), but the base is
already done for future features. Therefore, to attach a new feature,
a specific extension struct should subclass drm_v3d_extension and
update the list of extensions in a job submission.
v2:
- remove redundant elements to subclass struct (Daniel)
v3:
- add comment for v3d_get_extensions
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ed53b1cd7e3125b76f18fe3fb995a04393639bc6.1633016479.git.mwen@igalia.com
Move job memory allocation to v3d_job_init function. This aim to facilitate
error handling in job initialization, since cleanup steps are similar for
all (struct v3d_job)-based types of job involved in a command submission.
To generalize v3d_job_init(), this change takes into account that all job
structs have the first element a struct v3d_job (bin, render, tfu, csd) or
it is a v3d_job itself (clean_job) for pointer casting.
v3:
- explicitly init job as NULL (Iago)
- fix pm failure handling on v3_job_init (Iago)
Suggested-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4d12e07bd334d2cddb51cabd359e99edde595619.1633016479.git.mwen@igalia.com
5.15-rc1 crashes with blank screen when booting up on two ThinkPads
using i915. Bisections converge convincingly, but arrive at different
and suprising "culprits", none of them the actual culprit.
netconsole (with init_netconsole() hacked to call i915_init() when
logging has started, instead of by module_init()) tells the story:
kernel BUG at drivers/gpu/drm/i915/i915_sw_fence.c:245!
with RSI: ffffffff814d408b pointing to sw_fence_dummy_notify().
I've been building with CONFIG_CC_OPTIMIZE_FOR_SIZE=y, and that
function needs to be 4-byte aligned.
Fixes: 62eaf0ae21 ("drm/i915/guc: Support request cancellation")
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The overflow check does causes a warning from clang-14 when 'sz' is a type
that is smaller than size_t:
drivers/gpu/drm/msm/msm_gem_submit.c:217:10: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (sz == SIZE_MAX) {
Change the type accordingly.
Fixes: 20224d715a ("drm/msm/submit: Move copy_from_user ahead of locking bos")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210927113632.3849987-1-arnd@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some userspace apps make assumptions that rendering against multiple
contexts within the same process (from the same thread, with appropriate
MakeCurrent() calls) provides sufficient synchronization without any
external synchronization (ie. glFenceSync()/glWaitSync()). Since a
submitqueue maps to a gl/vk context, having multiple sched entities of
the same priority only works with implicit sync enabled.
To fix this, limit things to a single sched entity per priority level
per process.
An alternative would be sharing submitqueues between contexts in
userspace, but tracking of per-context faults (ie. GL_EXT_robustness)
is already done at the submitqueue level, so this is not an option.
Signed-off-by: Rob Clark <robdclark@chromium.org>
msm_file_private is more gpu related, and in the next commit it will
need access to other GPU specific #defines. While we're at it, add
some comments.
Signed-off-by: Rob Clark <robdclark@chromium.org>
In theory a context can be destroyed and a new one allocated at the same
address, making the pointer comparision to detect when we don't need to
update the current pagetables invalid. Instead assign a sequence number
to each context on creation, and use this for the check.
Fixes: 84c31ee16f ("drm/msm/a6xx: Add support for per-instance pagetables")
Signed-off-by: Rob Clark <robdclark@chromium.org>
I've seen some crashes in our crash reporting that *look* like multiple
threads stomping on each other while communicating with GMU. So wrap
all those paths in a lock.
Signed-off-by: Rob Clark <robdclark@chromium.org>
While sanitizing the hardware state we're currently forcing
the pipe bottom color legacy csc/gamma bits on. That is not a
good idea as BIOSen are likely to leave gabage in the LUTs and
so doing this causes ugly visual glitches if and when the
planes covering the background get disabled. This was exactly
the case on this Dell Precision 5560 tgl laptop.
On icl+ we don't normally even use these legacy bits
anymore and instead use their GAMMA_MODE counterparts.
On earlier platforms the bits are used, but we still
shouldn't force them on without knowing what's in the LUT.
So two options, get rid of the whole thing, or do what
intel_color_commit() does to make sure the bottom color state
matches whatever out hardware readout produced. I chose the
latter since it'll match what happens on older platforms when
the primary plane gets turned off. In fact let's just call
intel_color_commit(). It'll also do some CSC programming but
since we don't have readout for that it'll actually just set
to all zeros. So in the unlikely case of CSC actually being
enabld by the BIOS we'll end up with all black until the first
atomic commit happens.
Still not totally sure what we should do about color management
features here in general. Probably the safest thing would be to
force everything off exactly at the same time when we disable
the primary plane as there is no guarantees that whatever the
LUTs/CSCs contain make any sense whatsoever without the
specific pixel data in the BIOS fb. And if we preserve the
primary plane then we should disable the color management
features exactly when the primary plane fb contents first
changes since the new content assumes more or less no
transformations. But of course synchronizing front buffer
rendering with anything else is a bit hard...
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3534
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928185105.3030-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
