ce80098db2439ee44403ec6fccd3a10be21c7aff
54826 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
56d3375448 |
Merge tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie: "Summary below. i915 starts to add support for DG2 GPUs, enables DG1 and ADL-S support by default, lots of work to enable DisplayPort 2.0 across drivers. Lots of documentation updates and fixes across the board. core: - improve dma_fence, lease and resv documentation - shmem-helpers: allocate WC pages on x86, use vmf_insert_pin - sched fixes/improvements - allow empty drm leases - add dma resv iterator - add more DP 2.0 headers - DP MST helper improvements for DP2.0 dma-buf: - avoid warnings, remove fence trace macros bridge: - new helper to get rid of panels - probe improvements for it66121 - enable DSI EOTP for anx7625 fbdev: - efifb: release runtime PM on destroy ttm: - kerneldoc switch - helper to clear all DMA mappings - pool shrinker optimizaton - remove ttm_tt_destroy_common - update ttm_move_memcpy for async use panel: - add new panel-edp driver amdgpu: - Initial DP 2.0 support - Initial USB4 DP tunnelling support - Aldebaran MCE support - Modifier support for DCC image stores for GFX 10.3 - Display rework for better FP code handling - Yellow Carp/Cyan Skillfish updates - Cyan Skillfish display support - convert vega/navi to IP discovery asic enumeration - validate IP discovery table - RAS improvements - Lots of fixes i915: - DG1 PCI IDs + LMEM discovery/placement - DG1 GuC submission by default - ADL-S PCI IDs updated + enabled by default - ADL-P (XE_LPD) fixed and updates - DG2 display fixes - PXP protected object support for Gen12 integrated - expose multi-LRC submission interface for GuC - export logical engine instance to user - Disable engine bonding on Gen12+ - PSR cleanup - PSR2 selective fetch by default - DP 2.0 prep work - VESA vendor block + MSO use of it - FBC refactor - try again to fix fast-narrow vs slow-wide eDP training - use THP when IOMMU enabled - LMEM backup/restore for suspend/resume - locking simplification - GuC major reworking - async flip VT-D workaround changes - DP link training improvements - misc display refactorings bochs: - new PCI ID rcar-du: - Non-contiguious buffer import support for rcar-du - r8a779a0 support prep omapdrm: - COMPILE_TEST fixes sti: - COMPILE_TEST fixes msm: - fence ordering improvements - eDP support in DP sub-driver - dpu irq handling cleanup - CRC support for making igt happy - NO_CONNECTOR bridge support - dsi: 14nm phy support for msm8953 - mdp5: msm8x53, sdm450, sdm632 support stm: - layer alpha + zpo support v3d: - fix Vulkan CTS failure - support multiple sync objects gud: - add R8/RGB332/RGB888 pixel formats vc4: - convert to new bridge helpers vgem: - use shmem helpers virtio: - support mapping exported vram zte: - remove obsolete driver rockchip: - use bridge attach no connector for LVDS/RGB" * tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm: (1259 commits) drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits drm/amd/display: MST support for DPIA drm/amdgpu: Fix even more out of bound writes from debugfs drm/amdgpu/discovery: add SDMA IP instance info for soc15 parts drm/amdgpu/discovery: add UVD/VCN IP instance info for soc15 parts drm/amdgpu/UAPI: rearrange header to better align related items drm/amd/display: Enable dpia in dmub only for DCN31 B0 drm/amd/display: Fix USB4 hot plug crash issue drm/amd/display: Fix deadlock when falling back to v2 from v3 drm/amd/display: Fallback to clocks which meet requested voltage on DCN31 drm/amd/display: move FPU associated DCN301 code to DML folder drm/amd/display: fix link training regression for 1 or 2 lane drm/amd/display: add two lane settings training options drm/amd/display: decouple hw_lane_settings from dpcd_lane_settings drm/amd/display: implement decide lane settings drm/amd/display: adopt DP2.0 LT SCR revision 8 drm/amd/display: FEC configuration for dpia links in MST mode drm/amd/display: FEC configuration for dpia links drm/amd/display: Add workaround flag for EDID read on certain docks drm/amd/display: Set phy_mux_sel bit in dmub scratch register ... |
||
|
Linus Torvalds
|
f73cd9c951 |
Merge tag 'thermal-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These extend the thermal trip point crossing notifications sent via
netlink to contain the temperature causing the trip point to be
crossed, deprecate the user space thermal governor, add new DT
bindings to drivers, move ABI documentation to Documentation/ABI, fix
assorted issues and clean up code.
Specifics:
- Constify a variable in thermal MMIO driver (Rikard Falkeborn).
- Add the current temperature in the netlink message when crossing a
trip point in order to prevent useless back and forth reading from
userspace (Daniel Lezcano).
- Add support for the 'HC' variant on PM8998 PMIC in order to support
VADC channels on recent QCom boards (Bjorn Andersson).
- Add support for calibration values from hardware when they are
fused (Niklas Söderlund).
- Fix NULL pointer dereference in the thermal_release callback when
an error occurs in the thermal_zone_device_register() (Yuanzheng
Song).
- Fix use-after-free in __thermal_cooling_device_register() in the
error path (Ziyang Xuan).
- Fix compilation of the LMh driver when CONFIG_QCOM_SCM is not set
(Jackie Liu).
- Add timeout when reading a register that can block forever in
certain circumstances in the tsens driver (Ansuel Smith).
- Add DT binding for the reset lines and use them in the rockchip
sensor driver (Johan Jonker).
- Add new uniphier NX1 SoC temperature sensor (Kunihiko Hayashi).
- Save and restore the TCC value in the int340x driver (Antoine
Tenart).
- Deprecate the writability of the cooling device state sysfs file
and the user space governor (Daniel Lezcano).
- Delete bogus length check in int340x (Dan Carpenter).
- Use bitmap_zalloc/bitmap_free when applicable in intel_powerclamp
(Christophe JAILLET).
- Move thermal ABI documentation to Documentation/ABI (Mauro Carvalho
Chehab)"
* tag 'thermal-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (21 commits)
thermal/core: Deprecate changing cooling device state from userspace
thermal/core: Make the userspace governor deprecated
thermal/drivers/int340x: Improve the tcc offset saving for suspend/resume
thermal/drivers/uniphier: Add compatible string for NX1 SoC
dt-bindings: thermal: uniphier: Add binding for NX1 SoC
thermal/drivers/rockchip_thermal: Allow more resets for tsadc node
dt-bindings: thermal: remove redundant comments from rockchip-thermal.yaml
dt-bindings: thermal: allow more resets for tsadc node in rockchip-thermal.yaml
thermal/drivers/tsens: Add timeout to get_temp_tsens_valid
thermal/drivers/qcom/lmh: make QCOM_LMH depends on QCOM_SCM
thermal/core: fix a UAF bug in __thermal_cooling_device_register()
thermal/core: Fix null pointer dereference in thermal_release()
thermal: rcar_gen3_thermal: Read calibration from hardware
thermal: rcar_gen3_thermal: Store thcode and ptat in priv data
thermal/drivers/qcom/spmi-adc-tm5: Add support for HC variant
dt-bindings: thermal: qcom: add HC variant of adc-thermal monitor bindings
thermal: Move ABI documentation to Documentation/ABI
thermal/drivers/netlink: Add the temperature when crossing a trip point
thermal/drivers/thermal_mmio: Constify static struct thermal_mmio_ops
thermal: int340x: delete bogus length check
...
|
||
|
Linus Torvalds
|
c0d6586afa |
Merge tag 'acpi-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to the most recent upstream
revision, address some issues related to the ACPI power resources
management, simplify the enumeration of PCI devices having ACPI
companions, add new quirks, fix assorted problems, update the
ACPI-related information in maintainers and clean up code in several
places.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20210930
including the following changes:
- Fix system-wide resume issue caused by evaluating control
methods too early in the resume path (Rafael Wysocki).
- Add support for Windows 2020 _OSI string (Mario Limonciello).
- Add Generic Port Affinity type for SRAT (Alison Schofield).
- Add disassembly support for the NHLT ACPI table (Bob Moore).
- Avoid flushing caches before entering C3 type of idle states on AMD
processors (Deepak Sharma).
- Avoid enumerating CPUs that are not present and not online-capable
according to the platform firmware (Mario Limonciello).
- Add DMI-based mechanism to quirk IRQ overrides and use it for two
platforms (Hui Wang).
- Change the configuration of unused ACPI device objects to reflect
the D3cold power state after enumerating devices (Rafael Wysocki).
- Update MAINTAINERS information regarding ACPI (Rafael Wysocki).
- Fix typo in ACPI Kconfig (Masanari Iid).
- Use sysfs_emit() instead of snprintf() in some places (Qing Wang).
- Make the association of ACPI device objects with PCI devices more
straightforward and simplify the code doing that for all devices in
general (Rafael Wysocki).
- Use acpi_device_adr() in acpi_find_child_device() instead of
evaluating _ADR (Rafael Wysocki).
- Drop duplicate device IDs from PNP device IDs list (Krzysztof
Kozlowski).
- Allow acpi_idle_play_dead() to use C3 on AMD processors (Richard
Gong).
- Use ACPI_COMPANION() to simplify code in some drivers (Rafael
Wysocki).
- Check the states of all ACPI power resources during initialization
to avoid dealing with power resources in unknown states (Rafael
Wysocki).
- Fix ACPI power resource issues related to sharing wakeup power
resources (Rafael Wysocki).
- Avoid registering redundant suspend_ops (Rafael Wysocki).
- Report battery charging state as "full" if it appears to be over
the design capacity (André Almeida).
- Quirk GK45 mini PC to skip reading _PSR in the AC driver (Stefan
Schaeckeler).
- Mark apei_hest_parse() static (Christoph Hellwig).
- Relax platform response timeout to 1 second after instructing it to
inject an error (Shuai Xue).
- Make the PRM code handle memory allocation and remapping failures
more gracefully and drop some unnecessary blank lines from that
code (Aubrey Li).
- Fix spelling mistake in the ACPI documentation (Colin Ian King)"
* tag 'acpi-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (36 commits)
ACPI: glue: Use acpi_device_adr() in acpi_find_child_device()
perf: qcom_l2_pmu: ACPI: Use ACPI_COMPANION() directly
ACPI: APEI: mark apei_hest_parse() static
ACPI: APEI: EINJ: Relax platform response timeout to 1 second
gpio-amdpt: ACPI: Use the ACPI_COMPANION() macro directly
nouveau: ACPI: Use the ACPI_COMPANION() macro directly
ACPI: resources: Add one more Medion model in IRQ override quirk
ACPI: AC: Quirk GK45 to skip reading _PSR
ACPI: PM: sleep: Do not set suspend_ops unnecessarily
ACPI: PRM: Handle memory allocation and memory remap failure
ACPI: PRM: Remove unnecessary blank lines
ACPI: PM: Turn off wakeup power resources on _DSW/_PSW errors
ACPI: PM: Fix sharing of wakeup power resources
ACPI: PM: Turn off unused wakeup power resources
ACPI: PM: Check states of power resources during initialization
ACPI: replace snprintf() in "show" functions with sysfs_emit()
ACPI: LPSS: Use ACPI_COMPANION() directly
ACPI: scan: Release PM resources blocked by unused objects
ACPI: battery: Accept charges over the design capacity as full
ACPICA: Update version to 20210930
...
|
||
|
Linus Torvalds
|
a85373fe44 |
Merge branch 'for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo: - The misc controller now reports allocation rejections through misc.events instead of printking - cgroup_mutex usage is reduced to improve scalability of some operations - vhost helper threads are now assigned to the right cgroup on cgroup2 - Bug fixes * 'for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: bpf: Move wrapper for __cgroup_bpf_*() to kernel/bpf/cgroup.c cgroup: Fix rootcg cpu.stat guest double counting cgroup: no need for cgroup_mutex for /proc/cgroups cgroup: remove cgroup_mutex from cgroupstats_build cgroup: reduce dependency on cgroup_mutex cgroup: cgroup-v1: do not exclude cgrp_dfl_root cgroup: Make rebind_subsystems() disable v2 controllers all at once docs/cgroup: add entry for misc.events misc_cgroup: remove error log to avoid log flood misc_cgroup: introduce misc.events to count failures |
||
|
Linus Torvalds
|
4075409c9f |
Merge branch 'for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo: "Nothing too interesting. An optimization to short-circuit noop cpumask updates, debug dump code reorg, and doc update" * 'for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: doc: Call out the non-reentrance conditions workqueue: Introduce show_one_worker_pool and show_one_workqueue. workqueue: make sysfs of unbound kworker cpumask more clever |
||
Krzysztof Kozlowski
|
4b44521c5d |
dt-bindings: clock: fu740-prci: add reset-cells
The SiFive FU740 Power Reset Clock Interrupt Controller is a reset line
provider so add respective reset-cells property to fix:
arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dt.yaml: clock-controller@10000000:
'#reset-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210920144944.162431-1-krzysztof.kozlowski@canonical.com
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
||
Kunihiko Hayashi
|
d911ed9330 |
dt-bindings: clock: uniphier: Add clock binding for SoC-glue
Update binding document for clocks implemented in SoC-glue. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1634000035-3114-5-git-send-email-hayashi.kunihiko@socionext.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
|
Kunihiko Hayashi
|
6a7f2c9e95 |
dt-bindings: clock: uniphier: Add NX1 clock binding
Update clock binding document for UniPhier NX1 SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1634000035-3114-3-git-send-email-hayashi.kunihiko@socionext.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
Jens Renner
|
dd5e128020 |
clk: si5351: Update datasheet references
Silicon Labs is now part of Skyworks Inc. so update the URLs to the datasheet and application note. Signed-off-by: Jens Renner <renner@efe-gmbh.de> Link: https://lore.kernel.org/r/20210913074823.115212-1-renner@efe-gmbh.de Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
Stephen Boyd
|
e2ceaa867d |
Merge branches 'clk-composite-determine-fix', 'clk-allwinner', 'clk-amlogic' and 'clk-samsung' into clk-next
* clk-composite-determine-fix:
clk: composite: Use rate_ops.determine_rate when also a mux is available
clk: composite: Also consider .determine_rate for rate + mux composites
* clk-allwinner:
clk: sunxi: sun8i-apb0: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-ar100: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-apb0-gates: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: sun6i-apb0: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80-usb: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80-de: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun9i-a80: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-r40: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-de2: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun8i-a83t: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun50i-h6: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi-ng: ccu-sun50i-a64: Make use of the helper function devm_platform_ioremap_resource()
clk: sunxi: clk-mod0: Make use of the helper function devm_platform_ioremap_resource()
dt-bindings: clocks: Fix typo in the H6 compatible
clk: sunxi-ng: Use a separate lock for each CCU instance
clk: sunxi-ng: Prevent unbinding CCUs via sysfs
clk: sunxi-ng: Unregister clocks/resets when unbinding
clk: sunxi-ng: Add machine dependency to A83T CCU
clk: sunxi-ng: mux: Remove unused 'reg' field
* clk-amlogic:
clk: meson: meson8b: Make the video clock trees mutable
clk: meson: meson8b: Initialize the HDMI PLL registers
clk: meson: meson8b: Add the HDMI PLL M/N parameters
clk: meson: meson8b: Add the vid_pll_lvds_en gate clock
clk: meson: meson8b: Use CLK_SET_RATE_NO_REPARENT for vclk{,2}_in_sel
clk: meson: meson8b: Export the video clocks
* clk-samsung:
clk: samsung: describe drivers in Kconfig
clk: samsung: exynos5433: update apollo and atlas clock probing
clk: samsung: add support for CPU clocks
clk: samsung: Introduce Exynos850 clock driver
dt-bindings: clock: Document Exynos850 CMU bindings
dt-bindings: clock: Add bindings definitions for Exynos850 CMU
clk: samsung: clk-pll: Implement pll0831x PLL type
clk: samsung: clk-pll: Implement pll0822x PLL type
clk: samsung: s5pv210-audss: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos5433: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos4412-isp: Make use of devm_platform_ioremap_resource()
clk: samsung: exynos-audss: Make use of devm_platform_ioremap_resource()
|
||
|
Stephen Boyd
|
8d741ecd46 |
Merge branches 'clk-imx', 'clk-ux500' and 'clk-debugfs' into clk-next
* clk-imx: (21 commits) clk: imx: Make CLK_IMX8ULP select MXC_CLK clk: imx: imx6ul: Fix csi clk gate register clk: imx: imx6ul: Move csi_sel mux to correct base register clk: imx: Fix the build break when clk-imx8ulp build as module clk: imx: Add the pcc reset controller support on imx8ulp clk: imx: Add clock driver for imx8ulp clk: imx: Update the pfdv2 for 8ulp specific support clk: imx: disable the pfd when set pfdv2 clock rate clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp clk: imx: disable i.mx7ulp composite clock during initialization clk: imx: Update the compsite driver to support imx8ulp clk: imx: Update the pllv4 to support imx8ulp dt-bindings: clock: Add imx8ulp clock support clk: imx: Rework imx_clk_hw_pll14xx wrapper clk: imx: Rework all imx_clk_hw_composite wrappers clk: imx: Rework all clk_hw_register_divider wrappers clk: imx: Rework all clk_hw_register_mux wrappers clk: imx: Rework all clk_hw_register_gate2 wrappers clk: imx: Rework all clk_hw_register_gate wrappers clk: imx: Make mux/mux2 clk based helpers use clk_hw based ones ... * clk-ux500: clk: ux500: Add driver for the reset portions of PRCC dt-bindings: clock: u8500: Rewrite in YAML and extend * clk-debugfs: clk: use clk_core_get_rate_recalc() in clk_rate_get() |
||
|
Stephen Boyd
|
a379e16ab8 |
Merge branches 'clk-qcom', 'clk-mtk', 'clk-versatile' and 'clk-doc' into clk-next
- Use ARRAY_SIZE in qcom clk drivers - Remove some impractical fallback parent names in qcom clk drivers - GCC and RPMcc support for Qualcomm QCM2290 SoCs - GCC support for Qualcomm MSM8994/MSM8992 SoCs - LPASSCC and CAMCC support for Qualcomm SC7280 SoCs - Support for Mediatek MT8195 SoCs - Make Mediatek clk drivers tristate * clk-qcom: (44 commits) clk: qcom: gdsc: enable optional power domain support clk: qcom: videocc-sm8250: use runtime PM for the clock controller clk: qcom: dispcc-sm8250: use runtime PM for the clock controller dt-bindings: clock: qcom,videocc: add mmcx power domain dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain clk: qcom: gcc-sc7280: Drop unused array clk: qcom: camcc: Add camera clock controller driver for SC7280 dt-bindings: clock: Add YAML schemas for CAMCC clocks on SC7280 clk: qcom: Add lpass clock controller driver for SC7280 dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280 clk: qcom: Kconfig: Sort the symbol for SC_LPASS_CORECC_7180 clk: qcom: mmcc-sdm660: Add hw_ctrl flag to venus_core0_gdsc clk: qcom: mmcc-sdm660: Add necessary CXCs to venus_gdsc clk: qcom: gcc-msm8994: Use ARRAY_SIZE() for num_parents clk: qcom: gcc-msm8994: Add proper msm8992 support clk: qcom: gcc-msm8994: Add modem reset clk: qcom: gcc-msm8994: Remove the inexistent GDSC_PCIE clk: qcom: gcc-msm8994: Add missing clocks clk: qcom: gcc-msm8994: Add missing NoC clocks clk: qcom: gcc-msm8994: Fix up SPI QUP clocks ... * clk-mtk: (28 commits) clk: mediatek: Export clk_ops structures to modules clk: mediatek: support COMMON_CLK_MT6779 module build clk: mediatek: support COMMON_CLK_MEDIATEK module build clk: composite: export clk_register_composite clk: mediatek: Add MT8195 apusys clock support clk: mediatek: Add MT8195 imp i2c wrapper clock support clk: mediatek: Add MT8195 wpesys clock support clk: mediatek: Add MT8195 vppsys1 clock support clk: mediatek: Add MT8195 vppsys0 clock support clk: mediatek: Add MT8195 vencsys clock support clk: mediatek: Add MT8195 vdosys1 clock support clk: mediatek: Add MT8195 vdosys0 clock support clk: mediatek: Add MT8195 vdecsys clock support clk: mediatek: Add MT8195 scp adsp clock support clk: mediatek: Add MT8195 mfgcfg clock support clk: mediatek: Add MT8195 ipesys clock support clk: mediatek: Add MT8195 imgsys clock support clk: mediatek: Add MT8195 ccusys clock support clk: mediatek: Add MT8195 camsys clock support clk: mediatek: Add MT8195 infrastructure clock support ... * clk-versatile: clk: versatile: hide clock drivers from non-ARM users clk: versatile: Rename ICST to CLK_ICST clk: versatile: clk-icst: Support 'reg' in addition to 'vco-offset' for register address dt-bindings: clock: arm,syscon-icst: Use 'reg' instead of 'vco-offset' for VCO register address * clk-doc: dt-bindings: clk: fixed-mmio-clock: Convert to YAML |
||
|
Linus Torvalds
|
d7e0a795bf |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- More progress on the protected VM front, now with the full fixed
feature set as well as the limitation of some hypercalls after
initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
RISC-V:
- New KVM port.
x86:
- New API to control TSC offset from userspace
- TSC scaling for nested hypervisors on SVM
- Switch masterclock protection from raw_spin_lock to seqcount
- Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
- Convey the exit reason to userspace on emulation failure
- Configure time between NX page recovery iterations
- Expose Predictive Store Forwarding Disable CPUID leaf
- Allocate page tracking data structures lazily (if the i915 KVM-GT
functionality is not compiled in)
- Cleanups, fixes and optimizations for the shadow MMU code
s390:
- SIGP Fixes
- initial preparations for lazy destroy of secure VMs
- storage key improvements/fixes
- Log the guest CPNC
Starting from this release, KVM-PPC patches will come from Michael
Ellerman's PPC tree"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
RISC-V: KVM: fix boolreturn.cocci warnings
RISC-V: KVM: remove unneeded semicolon
RISC-V: KVM: Fix GPA passed to __kvm_riscv_hfence_gvma_xyz() functions
RISC-V: KVM: Factor-out FP virtualization into separate sources
KVM: s390: add debug statement for diag 318 CPNC data
KVM: s390: pv: properly handle page flags for protected guests
KVM: s390: Fix handle_sske page fault handling
KVM: x86: SGX must obey the KVM_INTERNAL_ERROR_EMULATION protocol
KVM: x86: On emulation failure, convey the exit reason, etc. to userspace
KVM: x86: Get exit_reason as part of kvm_x86_ops.get_exit_info
KVM: x86: Clarify the kvm_run.emulation_failure structure layout
KVM: s390: Add a routine for setting userspace CPU state
KVM: s390: Simplify SIGP Set Arch handling
KVM: s390: pv: avoid stalls when making pages secure
KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm
KVM: s390: pv: avoid double free of sida page
KVM: s390: pv: add macros for UVC CC values
s390/mm: optimize reset_guest_reference_bit()
s390/mm: optimize set_guest_storage_key()
s390/mm: no need for pte_alloc_map_lock() if we know the pmd is present
...
|
||
Rafael J. Wysocki
|
90e17edac4 |
Merge branches 'acpi-apei', 'acpi-prm' and 'acpi-docs'
Merge APEI, PRM and documentation udpates for 5.16-rc1: - Mark apei_hest_parse() static (Christoph Hellwig). - Relax platform response timeout to 1 second after instructing it to inject an error (Shuai Xue). - Make the PRM code handle memory allocation and remapping failures more gracefully and drop some unnecessary blank lines from that code (Aubrey Li). - Fix spelling mistake in the ACPI documentation (Colin Ian King). * acpi-apei: ACPI: APEI: mark apei_hest_parse() static ACPI: APEI: EINJ: Relax platform response timeout to 1 second * acpi-prm: ACPI: PRM: Handle memory allocation and memory remap failure ACPI: PRM: Remove unnecessary blank lines * acpi-docs: Documentation: ACPI: Fix spelling mistake "Millenium" -> "Millennium" |
||
|
Linus Torvalds
|
0aaa58eca6 |
Merge tag 'printk-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek: - Extend %pGp print format to print hex value of the page flags - Use kvmalloc instead of kmalloc to allocate devkmsg buffers - Misc cleanup and warning fixes * tag 'printk-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: vsprintf: Update %pGp documentation about that it prints hex value lib/vsprintf.c: Amend static asserts for format specifier flags vsprintf: Make %pGp print the hex value test_printf: Append strings more efficiently test_printf: Remove custom appending of '|' test_printf: Remove separate page_flags variable test_printf: Make pft array const ia64: don't do IA64_CMPXCHG_DEBUG without CONFIG_PRINTK printk: use gnu_printf format attribute for printk_sprint() printk: avoid -Wsometimes-uninitialized warning printk: use kvmalloc instead of kmalloc for devkmsg_user |
||
|
Linus Torvalds
|
c150d66bd5 |
Merge tag 'integrity-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar: "Other than the new gid IMA policy rule support and the RCU locking fix, the couple of remaining changes are minor/trivial (e.g. __ro_after_init, replacing strscpy)" * tag 'integrity-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: evm: mark evm_fixmode as __ro_after_init ima: Use strscpy instead of strlcpy ima_policy: Remove duplicate 'the' in docs comment ima: add gid support ima: fix uid code style problems ima: fix deadlock when traversing "ima_default_rules". |
||
|
Rafael J. Wysocki
|
5c83017c54 |
Merge branch 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) framework updates for 5.16-rc1 from Viresh Kumar: "- Fix return value of _opp_add_static_v2() helper (YueHaibing). - Fix required-opp handle count (Pavankumar Kondeti). - Resource managed OPP helpers, type update to dev_pm_opp_attach_genpd() and update to their devfreq users, and minor DT binding change (Dmitry Osipenko)." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: dt-bindings: opp: Allow multi-worded OPP entry name opp: Fix return in _opp_add_static_v2() PM / devfreq: tegra30: Check whether clk_round_rate() returns zero rate PM / devfreq: tegra30: Use resource-managed helpers PM / devfreq: Add devm_devfreq_add_governor() opp: Add more resource-managed variants of dev_pm_opp_of_add_table() opp: Change type of dev_pm_opp_attach_genpd(names) argument opp: Fix required-opps phandle array count check |
||
|
Linus Torvalds
|
fc02cb2b37 |
Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
|
||
|
Linus Torvalds
|
bfc484fe6a |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - Delay boot-up self-test for built-in algorithms Algorithms: - Remove fallback path on arm64 as SIMD now runs with softirq off Drivers: - Add Keem Bay OCS ECC Driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (61 commits) crypto: testmgr - fix wrong key length for pkcs1pad crypto: pcrypt - Delay write to padata->info crypto: ccp - Make use of the helper macro kthread_run() crypto: sa2ul - Use the defined variable to clean code crypto: s5p-sss - Add error handling in s5p_aes_probe() crypto: keembay-ocs-ecc - Add Keem Bay OCS ECC Driver dt-bindings: crypto: Add Keem Bay ECC bindings crypto: ecc - Export additional helper functions crypto: ecc - Move ecc.h to include/crypto/internal crypto: engine - Add KPP Support to Crypto Engine crypto: api - Do not create test larvals if manager is disabled crypto: tcrypt - fix skcipher multi-buffer tests for 1420B blocks hwrng: s390 - replace snprintf in show functions with sysfs_emit crypto: octeontx2 - set assoclen in aead_do_fallback() crypto: ccp - Fix whitespace in sev_cmd_buffer_len() hwrng: mtk - Force runtime pm ops for sleep ops crypto: testmgr - Only disable migration in crypto_disable_simd_for_test() crypto: qat - share adf_enable_pf2vf_comms() from adf_pf2vf_msg.c crypto: qat - extract send and wait from adf_vf2pf_request_version() crypto: qat - add VF and PF wrappers to common send function ... |
||
Dmitry Osipenko
|
7ca81b690e |
dt-bindings: opp: Allow multi-worded OPP entry name
Not all OPP entries fit into a single word. In particular NVIDIA Tegra OPP tables use multi-word names. Allow OPP entry to have multi-worded name separated by hyphen. This silences DT checker warnings about wrong naming scheme. Reviewed-by: David Heidelberg <david@ixit.cz> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
|
Linus Torvalds
|
6fedc28076 |
Merge tag 'rcu.2021.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Miscellaneous fixes
- Torture-test updates for smp_call_function(), most notably improved
checking of module parameters.
- Tasks-trace RCU updates that fix a number of rare but important
race-condition bugs.
- Other torture-test updates, most notably better checking of module
parameters. In addition, rcutorture may once again be run on
CONFIG_PREEMPT_RT kernels.
- Torture-test scripting updates, most notably specifying the new
CONFIG_KCSAN_STRICT kconfig option rather than maintaining an
ever-changing list of individual KCSAN kconfig options.
* tag 'rcu.2021.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (46 commits)
rcu: Fix rcu_dynticks_curr_cpu_in_eqs() vs noinstr
rcu: Always inline rcu_dynticks_task*_{enter,exit}()
torture: Make kvm-remote.sh print size of downloaded tarball
torture: Allot 1G of memory for scftorture runs
tools/rcu: Add an extract-stall script
scftorture: Warn on individual scf_torture_init() error conditions
scftorture: Count reschedule IPIs
scftorture: Account for weight_resched when checking for all zeroes
scftorture: Shut down if nonsensical arguments given
scftorture: Allow zero weight to exclude an smp_call_function*() category
rcu: Avoid unneeded function call in rcu_read_unlock()
rcu-tasks: Update comments to cond_resched_tasks_rcu_qs()
rcu-tasks: Fix IPI failure handling in trc_wait_for_one_reader
rcu-tasks: Fix read-side primitives comment for call_rcu_tasks_trace
rcu-tasks: Clarify read side section info for rcu_tasks_rude GP primitives
rcu-tasks: Correct comparisons for CPU numbers in show_stalled_task_trace
rcu-tasks: Correct firstreport usage in check_all_holdout_tasks_trace
rcu-tasks: Fix s/rcu_add_holdout/trc_add_holdout/ typo in comment
rcu-tasks: Move RTGS_WAIT_CBS to beginning of rcu_tasks_kthread() loop
rcu-tasks: Fix s/instruction/instructions/ typo in comment
...
|
||
|
Linus Torvalds
|
79ef0c0014 |
Merge tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt: - kprobes: Restructured stack unwinder to show properly on x86 when a stack dump happens from a kretprobe callback. - Fix to bootconfig parsing - Have tracefs allow owner and group permissions by default (only denying others). There's been pressure to allow non root to tracefs in a controlled fashion, and using groups is probably the safest. - Bootconfig memory managament updates. - Bootconfig clean up to have the tools directory be less dependent on changes in the kernel tree. - Allow perf to be traced by function tracer. - Rewrite of function graph tracer to be a callback from the function tracer instead of having its own trampoline (this change will happen on an arch by arch basis, and currently only x86_64 implements it). - Allow multiple direct trampolines (bpf hooks to functions) be batched together in one synchronization. - Allow histogram triggers to add variables that can perform calculations against the event's fields. - Use the linker to determine architecture callbacks from the ftrace trampoline to allow for proper parameter prototypes and prevent warnings from the compiler. - Extend histogram triggers to key off of variables. - Have trace recursion use bit magic to determine preempt context over if branches. - Have trace recursion disable preemption as all use cases do anyway. - Added testing for verification of tracing utilities. - Various small clean ups and fixes. * tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits) tracing/histogram: Fix semicolon.cocci warnings tracing/histogram: Fix documentation inline emphasis warning tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together tracing: Show size of requested perf buffer bootconfig: Initialize ret in xbc_parse_tree() ftrace: do CPU checking after preemption disabled ftrace: disable preemption when recursion locked tracing/histogram: Document expression arithmetic and constants tracing/histogram: Optimize division by a power of 2 tracing/histogram: Covert expr to const if both operands are constants tracing/histogram: Simplify handling of .sym-offset in expressions tracing: Fix operator precedence for hist triggers expression tracing: Add division and multiplication support for hist triggers tracing: Add support for creating hist trigger variables from literal selftests/ftrace: Stop tracing while reading the trace file by default MAINTAINERS: Update KPROBES and TRACING entries test_kprobes: Move it from kernel/ to lib/ docs, kprobes: Remove invalid URL and add new reference samples/kretprobes: Fix return value if register_kretprobe() failed lib/bootconfig: Fix the xbc_get_info kerneldoc ... |
||
Jakub Kicinski
|
b7b98f8689 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-11-01 We've added 181 non-merge commits during the last 28 day(s) which contain a total of 280 files changed, 11791 insertions(+), 5879 deletions(-). The main changes are: 1) Fix bpf verifier propagation of 64-bit bounds, from Alexei. 2) Parallelize bpf test_progs, from Yucong and Andrii. 3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus. 4) Improve bpf selftests on s390, from Ilya. 5) bloomfilter bpf map type, from Joanne. 6) Big improvements to JIT tests especially on Mips, from Johan. 7) Support kernel module function calls from bpf, from Kumar. 8) Support typeless and weak ksym in light skeleton, from Kumar. 9) Disallow unprivileged bpf by default, from Pawan. 10) BTF_KIND_DECL_TAG support, from Yonghong. 11) Various bpftool cleanups, from Quentin. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits) libbpf: Deprecate AF_XDP support kbuild: Unify options for BTF generation for vmlinux and modules selftests/bpf: Add a testcase for 64-bit bounds propagation issue. bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit. bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off. selftests/bpf: Fix also no-alu32 strobemeta selftest bpf: Add missing map_delete_elem method to bloom filter map selftests/bpf: Add bloom map success test for userspace calls bpf: Add alignment padding for "map_extra" + consolidate holes bpf: Bloom filter map naming fixups selftests/bpf: Add test cases for struct_ops prog bpf: Add dummy BPF STRUCT_OPS for test purpose bpf: Factor out helpers for ctx access checking bpf: Factor out a helper to prepare trampoline for struct_ops prog selftests, bpf: Fix broken riscv build riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h tools, build: Add RISC-V to HOSTARCH parsing riscv, bpf: Increase the maximum number of iterations selftests, bpf: Add one test for sockmap with strparser selftests, bpf: Fix test_txmsg_ingress_parser error ... ==================== Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
James Prestwood
|
18ac597af2 |
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
In most situations the neighbor discovery cache should be cleared on a NOCARRIER event which is currently done unconditionally. But for wireless roams the neighbor discovery cache can and should remain intact since the underlying network has not changed. This patch introduces a sysctl option ndisc_evict_nocarrier which can be disabled by a wireless supplicant during a roam. This allows packets to be sent after a roam immediately without having to wait for neighbor discovery. A user reported roughly a 1 second delay after a roam before packets could be sent out (note, on IPv4). This delay was due to the ARP cache being cleared. During testing of this same scenario using IPv6 no delay was noticed, but regardless there is no reason to clear the ndisc cache for wireless roams. Signed-off-by: James Prestwood <prestwoj@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
James Prestwood
|
fcdb44d08a |
net: arp: introduce arp_evict_nocarrier sysctl parameter
This change introduces a new sysctl parameter, arp_evict_nocarrier.
When set (default) the ARP cache will be cleared on a NOCARRIER event.
This new option has been defaulted to '1' which maintains existing
behavior.
Clearing the ARP cache on NOCARRIER is relatively new, introduced by:
commit
|
||
|
Linus Torvalds
|
d54f486035 |
Merge tag 'hwmon-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New driver:
- Maxim MAX6620
Notable functional enhancements:
- Add Asus WMI support to nct6775 driver, and list boards supporting
it
- Move TMP461 support from tm401 driver to lm90 driver
- Add support for fanX_min, fanX_max and fanX_target to dell-smm
driver, and clean it up while doing so
- Extend mlxreg-fan driver to support multiple cooling devices and
multiple PWM channels. Also increase number of supported fan
tachometers.
- Add a new customer ID (for ASRock) to nct6683 driver
- Make temperature/voltage sensors on nct7802 configurable
- Add mfg_id debugfs entry to pmbus/ibm-cffps driver
- Support configurable sense resistor values in pmbus/lm25066, and
fix various coefficients
- Use generic notification mechanism in raspberrypi driver
Notable cleanups:
- Convert various devicetree bindings to dtschema, and add missing
bindings
- Convert i5500_temp and tmp103 drivers to
devm_hwmon_device_register_with_info
- Clean up non-bool "valid" data fields
- Improve devicetree configurability for tmp421 driver"
* tag 'hwmon-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (73 commits)
hwmon: (nct7802) Add of_node_put() before return
hwmon: (tmp401) Drop support for TMP461
hwmon: (lm90) Add basic support for TI TMP461
hwmon: (lm90) Introduce flag indicating extended temperature support
hwmon: (nct6775) add ProArt X570-CREATOR WIFI.
hwmon: (nct7802) Make temperature/voltage sensors configurable
dt-bindings: hwmon: Add nct7802 bindings
hwmon: (dell-smm) Speed up setting of fan speed
hwmon: (dell-smm) Add comment explaining usage of i8k_config_data[]
hwmon: (dell-smm) Return -ENOIOCTLCMD instead of -EINVAL
hwmon: (dell-smm) Use strscpy_pad()
hwmon: (dell-smm) Sort includes in alphabetical order
hwmon: (tmp421) Add of_node_put() before return
hwmon: (max31722) Warn about failure to put device in stand-by in .remove()
hwmon: (acpi_power_meter) Use acpi_bus_get_acpi_device()
hwmon: (dell-smm) Add support for fanX_min, fanX_max and fanX_target
dt-bindings: hwmon: allow specifying channels for tmp421
hwmon: (tmp421) ignore non-channel related DT nodes
hwmon: (tmp421) update documentation
hwmon: (tmp421) support HWMON_T_ENABLE
...
|
||
|
Linus Torvalds
|
2019295c9e |
Merge tag 'spi-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown: "This is quite a quiet release for SPI, there's been a bit of cleanup to the core from Uwe but nothing functionality wise. We have added several new drivers, Cadence XSPI, Ingenic JZ47xx, Qualcomm SC7280 and SC7180 and Xilinx Versal OSPI" * tag 'spi-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (41 commits) spi: Convert NXP flexspi to json schema spi: spi-geni-qcom: Add support for GPI dma spi: fsi: Fix contention in the FSI2SPI engine spi: spi-rpc-if: Check return value of rpcif_sw_init() spi: tegra210-quad: Put device into suspend on driver removal spi: tegra20-slink: Put device into suspend on driver removal spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe() spi: at91-usart: replacing legacy gpio interface for gpiod spi: replace snprintf in show functions with sysfs_emit spi: cadence: Add of_node_put() before return spi: orion: Add of_node_put() before goto spi: cadence-quadspi: fix dma_unmap_single() call spi: tegra20: fix build with CONFIG_PM_SLEEP=n spi: bcm-qspi: add support for 3-wire mode for half duplex transfer spi: bcm-qspi: Add mspi spcr3 32/64-bits xfer mode spi: Make several public functions private to spi.c spi: Reorder functions to simplify the next commit spi: Remove unused function spi_busnum_to_master() spi: Move comment about chipselect check to the right place spi: fsi: Print status on error ... |
||
|
Linus Torvalds
|
1260d242d9 |
Merge tag 'regulator-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown: "Thanks to the removal of the unused TPS80021 driver the regulator updates for this cycle actually have a negative diffstat. Otherwise it's been quite a quiet release, lots of fixes and small improvements with the biggest individual changes being several conversions of DT bindings to YAML format" * tag 'regulator-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits) regulator: Don't error out fixed regulator in regulator_sync_voltage() regulator: tps80031: Remove driver regulator: Fix SY7636A breakage regulator: uniphier: Add binding for NX1 SoC regulator: uniphier: Add USB-VBUS compatible string for NX1 SoC regulator: qcom,rpmh: Add compatible for PM6350 regulator: qcom-rpmh: Add PM6350 regulators regulator: sy7636a: Remove requirement on sy7636a mfd regulator: tps62360: replacing legacy gpio interface for gpiod regulator: lp872x: Remove lp872x_dvs_state regulator: lp872x: replacing legacy gpio interface for gpiod regulator: dt-bindings: samsung,s5m8767: convert to dtschema regulator: dt-bindings: samsung,s2mpa01: convert to dtschema regulator: dt-bindings: samsung,s2m: convert to dtschema dt-bindings: clock: samsung,s2mps11: convert to dtschema regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled regulator: dt-bindings: maxim,max8973: convert to dtschema regulator: dt-bindings: maxim,max8997: convert to dtschema regulator: dt-bindings: maxim,max8952: convert to dtschema ... |
||
|
Linus Torvalds
|
247ee3e7b7 |
Merge tag 'mailbox-v5.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
"qcom:
- add support for qcm2290
- consolidate msm8994 type apcs_data
mtk:
- fix clock id usage
apple:
- add driver for ASC/M3 controllers
pcc:
- reorganise PCC pcc_mbox_request_channel
- add support for PCCT extended PCC subspaces
misc:
- make use of devm_platform_ioremap_resource()
- change Altera, PCC and Apple mailbox maintainers"
* tag 'mailbox-v5.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (38 commits)
mailbox: imx: support i.MX8ULP S4 MU
dt-bindings: mailbox: imx-mu: add i.MX8ULP S400 MU support
ACPI/PCC: Add maintainer for PCC mailbox driver
mailbox: pcc: Move bulk of PCCT parsing into pcc_mbox_probe
mailbox: pcc: Add support for PCCT extended PCC subspaces(type 3/4)
mailbox: pcc: Drop handling invalid bit-width in {read,write}_register
mailbox: pcc: Avoid accessing PCCT table in pcc_send_data and pcc_mbox_irq
mailbox: pcc: Add PCC register bundle and associated accessor functions
mailbox: pcc: Rename doorbell ack to platform interrupt ack register
mailbox: pcc: Use PCC mailbox channel pointer instead of standard
mailbox: pcc: Add pcc_mbox_chan structure to hold shared memory region info
mailbox: pcc: Consolidate subspace doorbell register parsing
mailbox: pcc: Consolidate subspace interrupt information parsing
mailbox: pcc: Refactor all PCC channel information into a structure
mailbox: pcc: Fix kernel doc warnings
mailbox: apple: Add driver for Apple mailboxes
dt-bindings: mailbox: Add Apple mailbox bindings
MAINTAINERS: Add Apple mailbox files
mailbox: mtk-cmdq: Fix local clock ID usage
mailbox: mtk-cmdq: Validate alias_id on probe
...
|
||
|
Linus Torvalds
|
8a73c77c80 |
Merge tag 'mmc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC and MEMSTICK updates from Ulf Hansson: "MMC core: - Update maintainer and URL for the mmc-utils - Set default label for slot-gpio in case of no con-id - Convert MMC card DT bindings to a schema - Add optional host specific tuning support for eMMC HS400 - Add error handling of add_disk() MMC host: - mtk-sd: Add host specific tuning support for eMMC HS400 - mtk-sd: Make DMA handling more robust - dw_mmc: Prevent hangs for some data writes - dw_mmc: Move away from using the ->init_card() callback - mxs-mmc: Manage the regulator in the error path and in ->remove() - sdhci-cadence: Add support for the Microchip MPFS variant - sdhci-esdhc-imx: Add support for the NXP S32G2 variant - sdhci-of-arasan: Add support for the Intel Thunder Bay variant - sdhci-omap: Prepare to support more SoCs - sdhci-omap: Add support for omap3 and omap4 variants - sdhci-omap: Add support for power management - sdhci-omap: Add support for system wakeups - sdhci-msm: Add support for the msm8226 variant - sdhci-sprd: Verify that the DLL locks according to spec MEMSTICK: - Add error handling of add_disk() - A couple of small fixes and improvements" * tag 'mmc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (60 commits) docs: mmc: update maintainer name and URL mmc: dw_mmc: exynos: Fix spelling mistake "candiates" -> candidates MAINTAINERS: drop obsolete file pattern in SDHCI DRIVER section mmc: sdhci-esdhc-imx: add NXP S32G2 support dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G2 support mmc: dw_mmc: Drop use of ->init_card() callback mmc: sdhci-omap: Fix build if CONFIG_PM_SLEEP is not set mmc: sdhci-omap: Remove forward declaration of sdhci_omap_context_save() memstick: r592: Fix a UAF bug when removing the driver mmc: mxs-mmc: disable regulator on error and in the remove function mmc: sdhci-omap: Configure optional wakeirq mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM mmc: sdhci-omap: Implement PM runtime functions mmc: sdhci-omap: Add omap_offset to support omap3 and earlier mmc: sdhci-omap: Handle voltages to add support omap4 dt-bindings: sdhci-omap: Update binding for legacy SoCs mmc: sdhci-pci: Remove dead code (rst_n_gpio et al) mmc: sdhci-pci: Remove dead code (cd_gpio, cd_irq et al) mmc: sdhci-pci: Remove dead code (struct sdhci_pci_data et al) mmc: sdhci: Remove unused prototype declaration in the header ... |
||
|
Linus Torvalds
|
316b7eaa93 |
Merge tag 'for-linus-5.16-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI driver updates from Corey Minyard: "A new type of low-level IPMI driver is added for direct communication over the IPMI message bus without a BMC between the driver and the bus. Other than that, lots of little bug fixes and enhancements" * tag 'for-linus-5.16-1' of https://github.com/cminyard/linux-ipmi: ipmi: kcs_bmc: Fix a memory leak in the error handling path of 'kcs_bmc_serio_add_device()' char: ipmi: replace snprintf in show functions with sysfs_emit ipmi: ipmb: fix dependencies to eliminate build error ipmi:ipmb: Add OF support ipmi: bt: Add ast2600 compatible string ipmi: bt-bmc: Use registers directly ipmi: ipmb: Fix off-by-one size check on rcvlen ipmi:ssif: Use depends on, not select, for I2C ipmi: Add docs for the IPMI IPMB driver ipmi: Add docs for IPMB direct addressing ipmi:ipmb: Add initial support for IPMI over IPMB ipmi: Add support for IPMB direct messages ipmi: Export ipmb_checksum() ipmi: Fix a typo ipmi: Check error code before processing BMC response ipmi:devintf: Return a proper error when recv buffer too small ipmi: Disable some operations during a panic ipmi:watchdog: Set panic count to proper value on a panic |
||
|
Linus Torvalds
|
73d21a3579 |
Merge tag 'media/v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab: - New driver for SK Hynix Hi-846 8M pixel camera - New driver for the ov13b10 camera - New driver for Renesas R-Car ISP - mtk-vcodec gained support for version 2 of decoder firmware ABI - The legacy sir_ir driver got removed - videobuf2: the vb2_mem_ops kAPI had some improvements - lots of cleanups, fixes and new features at device drivers * tag 'media/v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits) media: venus: core: Add sdm660 DT compatible and resource struct media: dt-bindings: media: venus: Add sdm660 dt schema media: venus: vdec: decoded picture buffer handling during reconfig sequence media: venus: Handle fatal errors during encoding and decoding media: venus: helpers: Add helper to mark fatal vb2 error media: venus: hfi: Check for sys error on session hfi functions media: venus: Make sys_error flag an atomic bitops media: venus: venc: Use pmruntime autosuspend media: allegro: write vui parameters for HEVC media: allegro: nal-hevc: implement generator for vui media: allegro: write correct colorspace into SPS media: allegro: extract nal value lookup functions to header media: allegro: correctly scale the bit rate in SPS media: allegro: remove external QP table media: allegro: fix row and column in response message media: allegro: add control to disable encoder buffer media: allegro: add encoder buffer support media: allegro: add pm_runtime support media: allegro: lookup VCU settings media: allegro: fix module removal if initialization failed ... |
||
Geert Uytterhoeven
|
4c7a7d5086 |
dt-bindings: net: ti,bluetooth: Document default max-speed
Document the default value of max-speed, as used by linux/drivers/bluetooth/hci_ll.c. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: David Lechner <david@lechnology.com> Link: https://lore.kernel.org/r/0c6a08c714aeb6dd96b5a54a45b0b5b1cfb49ad1.1635338283.git.geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org> |
||
Yuya Hamamachi
|
6162c4a511 |
dt-bindings: pci: rcar-pci-ep: Document r8a7795
Document the support for R-Car PCIe EP on R8A7795 SoC device. Signed-off-by: Yuya Hamamachi <yuya.hamamachi.sx@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Link: https://lore.kernel.org/r/e4acfe90021e45658e82ed042746707ace208a93.1635337518.git.geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org> |
||
David Heidelberg
|
950d566f0d |
dt-bindings: net: qcom,ipa: IPA does support up to two iommus
Fix warnings as: arch/arm/boot/dts/qcom-sdx55-mtp.dt.yaml: ipa@1e40000: iommus: [[21, 1504, 0], [21, 1506, 0]] is too long From schema: Documentation/devicetree/bindings/net/qcom,ipa.yaml Signed-off-by: David Heidelberg <david@ixit.cz> Reviewed-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20211026163240.131052-1-david@ixit.cz Signed-off-by: Rob Herring <robh@kernel.org> |
||
Kalesh Singh
|
0ca6d12c97 |
tracing/histogram: Update division by 0 documentation
If the divisor is a constant and zero, the undeifned case can be detected and an error returned instead of -1. Link: https://lkml.kernel.org/r/20211029183339.3216491-3-kaleshsingh@google.com Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Linus Torvalds
|
a5a9e00605 |
Merge tag 'seccomp-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook: "These are x86-specific, but I carried these since they're also seccomp-specific. This flips the defaults for spec_store_bypass_disable and spectre_v2_user from "seccomp" to "prctl", as enough time has passed to allow system owners to have updated the defensive stances of their various workloads, and it's long overdue to unpessimize seccomp threads. Extensive rationale and details are in Andrea's main patch. Summary: - set spec_store_bypass_disable & spectre_v2_user to prctl (Andrea Arcangeli)" * tag 'seccomp-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: x86: deduplicate the spectre_v2_user documentation x86: change default to spec_store_bypass_disable=prctl spectre_v2_user=prctl |
||
|
Linus Torvalds
|
f594e28d80 |
Merge tag 'hardening-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull compiler hardening updates from Kees Cook: "These are various compiler-related hardening feature updates. Notable is the addition of an explicit limited rationale for, and deprecation schedule of, gcc-plugins. gcc-plugins: - remove support for GCC 4.9 and older (Ard Biesheuvel) - remove duplicate include in gcc-common.h (Ye Guojin) - Explicitly document purpose and deprecation schedule (Kees Cook) - Remove cyc_complexity (Kees Cook) instrumentation: - Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO (Kees Cook) Clang LTO: - kallsyms: strip LTO suffixes from static functions (Nick Desaulniers)" * tag 'hardening-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: remove duplicate include in gcc-common.h gcc-plugins: Remove cyc_complexity gcc-plugins: Explicitly document purpose and deprecation schedule kallsyms: strip LTO suffixes from static functions gcc-plugins: remove support for GCC 4.9 and older hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO |
||
|
Linus Torvalds
|
552ebfe022 |
Merge tag 'for-5.16/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Lots of new features and fixes:
- Added TOC (table of content) support, which is a debugging feature
which is either initiated by pressing the TOC button or via command
in the BMC. If pressed the Linux built-in KDB/KGDB will be called
(Sven Schnelle)
- Fix CONFIG_PREEMPT (Sven)
- Fix unwinder on 64-bit kernels (Sven)
- Various kgdb fixes (Sven)
- Added KFENCE support (me)
- Switch to ARCH_STACKWALK implementation (me)
- Fix ptrace check on syscall return (me)
- Fix kernel crash with fixmaps on PA1.x machines (me)
- Move thread_info into task struct, aka CONFIG_THREAD_INFO_IN_TASK
(me)
- Updated defconfigs
- Smaller cleanups, including Makefile cleanups (Masahiro Yamada),
use kthread_run() macro (Cai Huoqing), use swap() macro (Yihao
Han)"
* tag 'for-5.16/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (36 commits)
parisc: Fix set_fixmap() on PA1.x CPUs
parisc: Use swap() to swap values in setup_bootmem()
parisc: Update defconfigs
parisc: decompressor: clean up Makefile
parisc: decompressor: remove repeated depenency of misc.o
parisc: Remove unused constants from asm-offsets.c
parisc/ftrace: use static key to enable/disable function graph tracer
parisc/ftrace: set function trace function
parisc: Make use of the helper macro kthread_run()
parisc: mark xchg functions notrace
parisc: enhance warning regarding usage of O_NONBLOCK
parisc: Drop ifdef __KERNEL__ from non-uapi kernel headers
parisc: Use PRIV_USER and PRIV_KERNEL in ptrace.h
parisc: Use PRIV_USER in syscall.S
parisc/kgdb: add kgdb_roundup() to make kgdb work with idle polling
parisc: Move thread_info into task struct
parisc: add support for TOC (transfer of control)
parisc/firmware: add functions to retrieve TOC data
parisc: add PIM TOC data structures
parisc: move virt_map macro to assembly.h
...
|
||
|
Linus Torvalds
|
46f8763228 |
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's the usual summary below, but the highlights are support for
the Armv8.6 timer extensions, KASAN support for asymmetric MTE, the
ability to kexec() with the MMU enabled and a second attempt at
switching to the generic pfn_valid() implementation.
Summary:
- Support for the Arm8.6 timer extensions, including a
self-synchronising view of the system registers to elide some
expensive ISB instructions.
- Exception table cleanup and rework so that the fixup handlers
appear correctly in backtraces.
- A handful of miscellaneous changes, the main one being selection of
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK.
- More mm and pgtable cleanups.
- KASAN support for "asymmetric" MTE, where tag faults are reported
synchronously for loads (via an exception) and asynchronously for
stores (via a register).
- Support for leaving the MMU enabled during kexec relocation, which
significantly speeds up the operation.
- Minor improvements to our perf PMU drivers.
- Improvements to the compat vDSO build system, particularly when
building with LLVM=1.
- Preparatory work for handling some Coresight TRBE tracing errata.
- Cleanup and refactoring of the SVE code to pave the way for SME
support in future.
- Ensure SCS pages are unpoisoned immediately prior to freeing them
when KASAN is enabled for the vmalloc area.
- Try moving to the generic pfn_valid() implementation again now that
the DMA mapping issue from last time has been resolved.
- Numerous improvements and additions to our FPSIMD and SVE
selftests"
[ armv8.6 timer updates were in a shared branch and already came in
through -tip in the timer pull - Linus ]
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
arm64: Select POSIX_CPU_TIMERS_TASK_WORK
arm64: Document boot requirements for FEAT_SME_FA64
arm64/sve: Fix warnings when SVE is disabled
arm64/sve: Add stub for sve_max_virtualisable_vl()
arm64: errata: Add detection for TRBE write to out-of-range
arm64: errata: Add workaround for TSB flush failures
arm64: errata: Add detection for TRBE overwrite in FILL mode
arm64: Add Neoverse-N2, Cortex-A710 CPU part definition
selftests: arm64: Factor out utility functions for assembly FP tests
arm64: vmlinux.lds.S: remove `.fixup` section
arm64: extable: add load_unaligned_zeropad() handler
arm64: extable: add a dedicated uaccess handler
arm64: extable: add `type` and `data` fields
arm64: extable: use `ex` for `exception_table_entry`
arm64: extable: make fixup_exception() return bool
arm64: extable: consolidate definitions
arm64: gpr-num: support W registers
arm64: factor out GPR numbering helpers
arm64: kvm: use kvm_exception_table_entry
arm64: lib: __arch_copy_to_user(): fold fixups into body
...
|
||
|
Linus Torvalds
|
879dbe9ffe |
Merge tag 'x86_sgx_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Borislav Petkov: "Add a SGX_IOC_VEPC_REMOVE ioctl to the /dev/sgx_vepc virt interface with which EPC pages can be put back into their uninitialized state without having to reopen /dev/sgx_vepc, which could not be possible anymore after startup due to security policies" * tag 'x86_sgx_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx/virt: implement SGX_IOC_VEPC_REMOVE ioctl x86/sgx/virt: extract sgx_vepc_remove_page |
||
|
Linus Torvalds
|
8cb1ae19bf |
Merge tag 'x86-fpu-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Thomas Gleixner:
- Cleanup of extable fixup handling to be more robust, which in turn
allows to make the FPU exception fixups more robust as well.
- Change the return code for signal frame related failures from
explicit error codes to a boolean fail/success as that's all what the
calling code evaluates.
- A large refactoring of the FPU code to prepare for adding AMX
support:
- Distangle the public header maze and remove especially the
misnomed kitchen sink internal.h which is despite it's name
included all over the place.
- Add a proper abstraction for the register buffer storage (struct
fpstate) which allows to dynamically size the buffer at runtime
by flipping the pointer to the buffer container from the default
container which is embedded in task_struct::tread::fpu to a
dynamically allocated container with a larger register buffer.
- Convert the code over to the new fpstate mechanism.
- Consolidate the KVM FPU handling by moving the FPU related code
into the FPU core which removes the number of exports and avoids
adding even more export when AMX has to be supported in KVM.
This also removes duplicated code which was of course
unnecessary different and incomplete in the KVM copy.
- Simplify the KVM FPU buffer handling by utilizing the new
fpstate container and just switching the buffer pointer from the
user space buffer to the KVM guest buffer when entering
vcpu_run() and flipping it back when leaving the function. This
cuts the memory requirements of a vCPU for FPU buffers in half
and avoids pointless memory copy operations.
This also solves the so far unresolved problem of adding AMX
support because the current FPU buffer handling of KVM inflicted
a circular dependency between adding AMX support to the core and
to KVM. With the new scheme of switching fpstate AMX support can
be added to the core code without affecting KVM.
- Replace various variables with proper data structures so the
extra information required for adding dynamically enabled FPU
features (AMX) can be added in one place
- Add AMX (Advanced Matrix eXtensions) support (finally):
AMX is a large XSTATE component which is going to be available with
Saphire Rapids XEON CPUs. The feature comes with an extra MSR
(MSR_XFD) which allows to trap the (first) use of an AMX related
instruction, which has two benefits:
1) It allows the kernel to control access to the feature
2) It allows the kernel to dynamically allocate the large register
state buffer instead of burdening every task with the the extra
8K or larger state storage.
It would have been great to gain this kind of control already with
AVX512.
The support comes with the following infrastructure components:
1) arch_prctl() to
- read the supported features (equivalent to XGETBV(0))
- read the permitted features for a task
- request permission for a dynamically enabled feature
Permission is granted per process, inherited on fork() and
cleared on exec(). The permission policy of the kernel is
restricted to sigaltstack size validation, but the syscall
obviously allows further restrictions via seccomp etc.
2) A stronger sigaltstack size validation for sys_sigaltstack(2)
which takes granted permissions and the potentially resulting
larger signal frame into account. This mechanism can also be used
to enforce factual sigaltstack validation independent of dynamic
features to help with finding potential victims of the 2K
sigaltstack size constant which is broken since AVX512 support
was added.
3) Exception handling for #NM traps to catch first use of a extended
feature via a new cause MSR. If the exception was caused by the
use of such a feature, the handler checks permission for that
feature. If permission has not been granted, the handler sends a
SIGILL like the #UD handler would do if the feature would have
been disabled in XCR0. If permission has been granted, then a new
fpstate which fits the larger buffer requirement is allocated.
In the unlikely case that this allocation fails, the handler
sends SIGSEGV to the task. That's not elegant, but unavoidable as
the other discussed options of preallocation or full per task
permissions come with their own set of horrors for kernel and/or
userspace. So this is the lesser of the evils and SIGSEGV caused
by unexpected memory allocation failures is not a fundamentally
new concept either.
When allocation succeeds, the fpstate properties are filled in to
reflect the extended feature set and the resulting sizes, the
fpu::fpstate pointer is updated accordingly and the trap is
disarmed for this task permanently.
4) Enumeration and size calculations
5) Trap switching via MSR_XFD
The XFD (eXtended Feature Disable) MSR is context switched with
the same life time rules as the FPU register state itself. The
mechanism is keyed off with a static key which is default
disabled so !AMX equipped CPUs have zero overhead. On AMX enabled
CPUs the overhead is limited by comparing the tasks XFD value
with a per CPU shadow variable to avoid redundant MSR writes. In
case of switching from a AMX using task to a non AMX using task
or vice versa, the extra MSR write is obviously inevitable.
All other places which need to be aware of the variable feature
sets and resulting variable sizes are not affected at all because
they retrieve the information (feature set, sizes) unconditonally
from the fpstate properties.
6) Enable the new AMX states
Note, this is relatively new code despite the fact that AMX support
is in the works for more than a year now.
The big refactoring of the FPU code, which allowed to do a proper
integration has been started exactly 3 weeks ago. Refactoring of the
existing FPU code and of the original AMX patches took a week and has
been subject to extensive review and testing. The only fallout which
has not been caught in review and testing right away was restricted
to AMX enabled systems, which is completely irrelevant for anyone
outside Intel and their early access program. There might be dragons
lurking as usual, but so far the fine grained refactoring has held up
and eventual yet undetected fallout is bisectable and should be
easily addressable before the 5.16 release. Famous last words...
Many thanks to Chang Bae and Dave Hansen for working hard on this and
also to the various test teams at Intel who reserved extra capacity
to follow the rapid development of this closely which provides the
confidence level required to offer this rather large update for
inclusion into 5.16-rc1
* tag 'x86-fpu-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
Documentation/x86: Add documentation for using dynamic XSTATE features
x86/fpu: Include vmalloc.h for vzalloc()
selftests/x86/amx: Add context switch test
selftests/x86/amx: Add test cases for AMX state management
x86/fpu/amx: Enable the AMX feature in 64-bit mode
x86/fpu: Add XFD handling for dynamic states
x86/fpu: Calculate the default sizes independently
x86/fpu/amx: Define AMX state components and have it used for boot-time checks
x86/fpu/xstate: Prepare XSAVE feature table for gaps in state component numbers
x86/fpu/xstate: Add fpstate_realloc()/free()
x86/fpu/xstate: Add XFD #NM handler
x86/fpu: Update XFD state where required
x86/fpu: Add sanity checks for XFD
x86/fpu: Add XFD state to fpstate
x86/msr-index: Add MSRs for XFD
x86/cpufeatures: Add eXtended Feature Disabling (XFD) feature bit
x86/fpu: Reset permission and fpstate on exec()
x86/fpu: Prepare fpu_clone() for dynamically enabled features
x86/fpu/signal: Prepare for variable sigframe length
x86/signal: Use fpu::__state_user_size for sigalt stack validation
...
|
||
|
Linus Torvalds
|
9a7e0a90a4 |
Merge tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner: - Revert the printk format based wchan() symbol resolution as it can leak the raw value in case that the symbol is not resolvable. - Make wchan() more robust and work with all kind of unwinders by enforcing that the task stays blocked while unwinding is in progress. - Prevent sched_fork() from accessing an invalid sched_task_group - Improve asymmetric packing logic - Extend scheduler statistics to RT and DL scheduling classes and add statistics for bandwith burst to the SCHED_FAIR class. - Properly account SCHED_IDLE entities - Prevent a potential deadlock when initial priority is assigned to a newly created kthread. A recent change to plug a race between cpuset and __sched_setscheduler() introduced a new lock dependency which is now triggered. Break the lock dependency chain by moving the priority assignment to the thread function. - Fix the idle time reporting in /proc/uptime for NOHZ enabled systems. - Improve idle balancing in general and especially for NOHZ enabled systems. - Provide proper interfaces for live patching so it does not have to fiddle with scheduler internals. - Add cluster aware scheduling support. - A small set of tweaks for RT (irqwork, wait_task_inactive(), various scheduler options and delaying mmdrop) - The usual small tweaks and improvements all over the place * tag 'sched-core-2021-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits) sched/fair: Cleanup newidle_balance sched/fair: Remove sysctl_sched_migration_cost condition sched/fair: Wait before decaying max_newidle_lb_cost sched/fair: Skip update_blocked_averages if we are defering load balance sched/fair: Account update_blocked_averages in newidle_balance cost x86: Fix __get_wchan() for !STACKTRACE sched,x86: Fix L2 cache mask sched/core: Remove rq_relock() sched: Improve wake_up_all_idle_cpus() take #2 irq_work: Also rcuwait for !IRQ_WORK_HARD_IRQ on PREEMPT_RT irq_work: Handle some irq_work in a per-CPU thread on PREEMPT_RT irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support. sched/rt: Annotate the RT balancing logic irqwork as IRQ_WORK_HARD_IRQ sched: Add cluster scheduler level for x86 sched: Add cluster scheduler level in core and related Kconfig for ARM64 topology: Represent clusters of CPUs within a die sched: Disable -Wunused-but-set-variable sched: Add wrapper for get_wchan() to keep task blocked x86: Fix get_wchan() to support the ORC unwinder proc: Use task_is_running() for wchan in /proc/$pid/stat ... |
||
|
Linus Torvalds
|
595b28fb0c |
Merge tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
- Move futex code into kernel/futex/ and split up the kitchen sink into
seperate files to make integration of sys_futex_waitv() simpler.
- Add a new sys_futex_waitv() syscall which allows to wait on multiple
futexes.
The main use case is emulating Windows' WaitForMultipleObjects which
allows Wine to improve the performance of Windows Games. Also native
Linux games can benefit from this interface as this is a common wait
pattern for this kind of applications.
- Add context to ww_mutex_trylock() to provide a path for i915 to
rework their eviction code step by step without making lockdep upset
until the final steps of rework are completed. It's also useful for
regulator and TTM to avoid dropping locks in the non contended path.
- Lockdep and might_sleep() cleanups and improvements
- A few improvements for the RT substitutions.
- The usual small improvements and cleanups.
* tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
locking: Remove spin_lock_flags() etc
locking/rwsem: Fix comments about reader optimistic lock stealing conditions
locking: Remove rcu_read_{,un}lock() for preempt_{dis,en}able()
locking/rwsem: Disable preemption for spinning region
docs: futex: Fix kernel-doc references
futex: Fix PREEMPT_RT build
futex2: Documentation: Document sys_futex_waitv() uAPI
selftests: futex: Test sys_futex_waitv() wouldblock
selftests: futex: Test sys_futex_waitv() timeout
selftests: futex: Add sys_futex_waitv() test
futex,arm: Wire up sys_futex_waitv()
futex,x86: Wire up sys_futex_waitv()
futex: Implement sys_futex_waitv()
futex: Simplify double_lock_hb()
futex: Split out wait/wake
futex: Split out requeue
futex: Rename mark_wake_futex()
futex: Rename: match_futex()
futex: Rename: hb_waiter_{inc,dec,pending}()
futex: Split out PI futex
...
|
||
|
Linus Torvalds
|
5a47ebe98e |
Merge tag 'irq-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core changes:
- Prevent a potential deadlock when initial priority is assigned to a
newly created interrupt thread. A recent change to plug a race
between cpuset and __sched_setscheduler() introduced a new lock
dependency which is now triggered. Break the lock dependency chain
by moving the priority assignment to the thread function.
- A couple of small updates to make the irq core RT safe.
- Confine the irq_cpu_online/offline() API to the only left unfixable
user Cavium Octeon so that it does not grow new usage.
- A small documentation update
Driver changes:
- A large cross architecture rework to move irq_enter/exit() into the
architecture code to make addressing the NOHZ_FULL/RCU issues
simpler.
- The obligatory new irq chip driver for Microchip EIC
- Modularize a few irq chip drivers
- Expand usage of devm_*() helpers throughout the driver code
- The usual small fixes and improvements all over the place"
* tag 'irq-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
h8300: Fix linux/irqchip.h include mess
dt-bindings: irqchip: renesas-irqc: Document r8a774e1 bindings
MIPS: irq: Avoid an unused-variable error
genirq: Hide irq_cpu_{on,off}line() behind a deprecated option
irqchip/mips-gic: Get rid of the reliance on irq_cpu_online()
MIPS: loongson64: Drop call to irq_cpu_offline()
irq: remove handle_domain_{irq,nmi}()
irq: remove CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: riscv: perform irqentry in entry code
irq: openrisc: perform irqentry in entry code
irq: csky: perform irqentry in entry code
irq: arm64: perform irqentry in entry code
irq: arm: perform irqentry in entry code
irq: add a (temporary) CONFIG_HANDLE_DOMAIN_IRQ_IRQENTRY
irq: nds32: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: arc: avoid CONFIG_HANDLE_DOMAIN_IRQ
irq: add generic_handle_arch_irq()
irq: unexport handle_irq_desc()
irq: simplify handle_domain_{irq,nmi}()
irq: mips: simplify do_domain_IRQ()
...
|
||
J. Bruce Fields
|
6d91929a6f |
nfsd: document server-to-server-copy parameters
Signed-off-by: J. Bruce Fields <bfields@redhat.com> |
||
|
Linus Torvalds
|
67a135b80e |
Merge tag 'erofs-for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang: "There are some new features available for this cycle. Firstly, EROFS LZMA algorithm support, specifically called MicroLZMA, is available as an option for embedded devices, LiveCDs and/or as the secondary auxiliary compression algorithm besides the primary algorithm in one file. In order to better support the LZMA fixed-sized output compression, especially for 4KiB pcluster size (which has lowest memory pressure thus useful for memory-sensitive scenarios), Lasse introduced a new LZMA header/container format called MicroLZMA to minimize the original LZMA1 header (for example, we don't need to waste 4-byte dictionary size and another 8-byte uncompressed size, which can be calculated by fs directly, for each pcluster) and enable EROFS fixed-sized output compression. Note that MicroLZMA can also be later used by other things in addition to EROFS too where wasting minimal amount of space for headers is important and it can be only compiled by enabling XZ_DEC_MICROLZMA. MicroLZMA has been supported by the latest upstream XZ embedded [1] & XZ utils [2], apply the latest related XZ embedded upstream patches by the XZ author Lasse here. Secondly, multiple device is also supported in this cycle, which is designed for multi-layer container images. By working together with inter-layer data deduplication and compression, we can achieve the next high-performance container image solution. Our team will announce the new Nydus container image service [3] implementation with new RAFS v6 (EROFS-compatible) format in Open Source Summit 2021 China [4] soon. Besides, the secondary compression head support and readmore decompression strategy are also included in this cycle. There are also some minor bugfixes and cleanups, as always. Summary: - support multiple devices for multi-layer container images; - support the secondary compression head; - support readmore decompression strategy; - support new LZMA algorithm (specifically called MicroLZMA); - some bugfixes & cleanups" * tag 'erofs-for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: don't trigger WARN() when decompression fails erofs: get rid of ->lru usage erofs: lzma compression support erofs: rename some generic methods in decompressor lib/xz, lib/decompress_unxz.c: Fix spelling in comments lib/xz: Add MicroLZMA decoder lib/xz: Move s->lzma.len = 0 initialization to lzma_reset() lib/xz: Validate the value before assigning it to an enum variable lib/xz: Avoid overlapping memcpy() with invalid input with in-place decompression erofs: introduce readmore decompression strategy erofs: introduce the secondary compression head erofs: get compression algorithms directly on mapping erofs: add multiple device support erofs: decouple basic mount options from fs_context erofs: remove the fast path of per-CPU buffer decompression |
||
|
Linus Torvalds
|
cd3e8ea847 |
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers: "Some cleanups for fs/crypto/: - Allow 256-bit master keys with AES-256-XTS - Improve documentation and comments - Remove unneeded field fscrypt_operations::max_namelen" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: fscrypt: improve a few comments fscrypt: allow 256-bit master keys with AES-256-XTS fscrypt: improve documentation for inline encryption fscrypt: clean up comments in bio.c fscrypt: remove fscrypt_operations::max_namelen |
||
Yanteng Si
|
75ca80e4c4 |
docs/zh_CN: add core-api xarray translation
Translate Documentation/core-api/xarray.rst into Chinese Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Reviewed-by: Alex Shi <alexs@kernel.org> Link: https://lore.kernel.org/r/2a125bcb3220e7c1b72ae87bcad1b225dd950338.1634358018.git.siyanteng@loongson.cn Signed-off-by: Jonathan Corbet <corbet@lwn.net> |
||
|
Yanteng Si
|
5876a638c8 |
docs/zh_CN: add core-api assoc_array translation
Translate Documentation/core-api/assoc_array.rst into Chinese. Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Reviewed-by: Alex Shi <alexs@kernel.org> Link: https://lore.kernel.org/r/860ac85d9a2a83c2b63eb8d1be929ad64280d7b2.1634358018.git.siyanteng@loongson.cn Signed-off-by: Jonathan Corbet <corbet@lwn.net> |