When the core MSI allocation fails, then the PCI/MSI code uses an already
freed MSI descriptor to unmask the MSI mask register in order to bring it back
into reset state.
Remove MSI_FLAG_FREE_MSI_DESCS from the PCI/MSI irqdomain flags and let the
PCI/MSI code free the MSI descriptors after usage.
Fixes: 0f62d941ac ("genirq/msi: Provide msi_domain_alloc/free_irqs_descs_locked()")
Reported-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tong Zhang <ztong0001@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/87r1938vbn.ffs@tglx
Turn the CONFIG_UNICODE symbol into a tristate that generates some always
built in code and remove the confusing CONFIG_UNICODE_UTF8_DATA symbol.
Note that a lot of the IS_ENABLED() checks could be turned from cpp
statements into normal ifs, but this change is intended to be fairly
mechanic, so that should be cleaned up later.
Fixes: 2b3d047870 ("unicode: Add utf8-data module")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Adjust the path of the ABI files for firewire.rst to prevent a
documentation build error. Prevents this problem:
Sphinx parallel build error:
docutils.utils.SystemMessage: Documentation/driver-api/firewire.rst:22: (SEVERE/4) Problems with "include" directive path:
InputError: [Errno 2] No such file or directory: '../Documentation/driver-api/ABI/stable/firewire-cdev'.
Fixes: 2f4830ef96 ("FireWire: add driver-api Introduction section")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220119033905.4779-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Latest updates for the EHL display voltage swing table (José Roberto de Souza)
- Additional step is required when programming the ADL-P display TC voltage swing (José Roberto de Souza)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yek1zdsnRPiBVvFF@tursulin-mobl2
Our nommu_virt_defconfig set SLOB=y and SLAB_MERGE_DEFAULT=n. As of
eb52c0fc23 ("mm: Make SLAB_MERGE_DEFAULT depend on SL[AU]B") it's no
longer necessary to set the second, which appears to never have had any
effect for SLOB=y anyway.
This was suggested by savedefconfig.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Enric Balletbo i Serra emails bounce:
<enric.balletbo@collabora.com>: Recipient address rejected: User unknown in local recipient table
so drop him from the maintainers, similarly to commit 3119c28634
("MAINTAINERS: Chrome: Drop Enric Balletbo i Serra").
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Enric Balletbo i Serra <eballetbo@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220120104009.159147-2-krzysztof.kozlowski@canonical.com
Enric Balletbo i Serra emails bounce:
<enric.balletbo@collabora.com>: Recipient address rejected: User unknown in local recipient table
so drop him from the maintainers, similarly to commit 3119c28634
("MAINTAINERS: Chrome: Drop Enric Balletbo i Serra"). Add generic DRM
bridge maintainers to Analogix ANX7814.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Enric Balletbo i Serra <eballetbo@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220120104009.159147-1-krzysztof.kozlowski@canonical.com
Fix a missing prototype warning noticed by the kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Usually palo (the PA-RISC boot loader) will check at boot time if the
machine/firmware was configured to use the serial line (ttyS0, SERIAL_x)
or the graphical display (tty0, graph) as default output device and add
the correct "console=ttyS0" or "console=tty0" Linux kernel parameter to
the kernel command line when starting the Linux kernel.
But the kernel could also have been started via the HP-UX boot loader
or directly in qemu, in which cases the console parameter is missing.
This patch fixes this problem by adding the correct console= parameter
if it's missing in the current kernel command line.
Signed-off-by: Helge Deller <deller@gmx.de>
Commit 0f153a1b81 ("usb: chipidea: Set the DT node on the child
device") caused the child device to match on the parent driver
instead of the child's driver since the child's DT node pointer matched.
The worst case result is a loop of the parent driver probing another
instance and creating yet another child device eventually exhausting the
stack. If the child driver happens to match first, then everything works
fine.
A device sharing the DT node should never do DT based driver matching,
so let's simply check of_node_reused in of_match_device() to prevent
that.
Fixes: 0f153a1b81 ("usb: chipidea: Set the DT node on the child device")
Link: https://lore.kernel.org/all/20220114105620.GK18506@ediswmail.ad.cirrus.com/
Reported-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Chen <peter.chen@nxp.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220118173404.1891800-1-robh@kernel.org
We can get rid of all the empty stubs because all these functions call
of_property_read_variable_u{8,16,32,64}_array() which already have an
empty stub if CONFIG_OF is not defined.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220118173504.2867523-3-michael@walle.cc
Make all the smaller variants of the of_parse_phandle() static inline.
This also let us remove the empty function stubs if CONFIG_OF is not
defined.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Walle <michael@walle.cc>
[robh: move index < 0 check into __of_parse_phandle_with_args]
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220118173504.2867523-2-michael@walle.cc
The 'interrupts' properties takes an irq number, not a phandle, and
'interrupt-parent' isn't needed in examples.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220119015611.2442819-1-robh@kernel.org
The YAML DT encoding has leaked into some array properties. Properties
which are defined as an array should have a schema that's just an array.
That means there should only be a single level of 'minItems',
'maxItems', and/or 'items'.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220119015627.2443334-1-robh@kernel.org
Change i40e_update_vsi_stats and struct i40e_vsi to use u64 fields to match
the width of the stats counters in struct i40e_rx_queue_stats.
Update debugfs code to use the correct format specifier for u64.
Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix for failed to init adminq: -53 while VF is resetting via MAC
address changing procedure.
Added sync module to avoid reading deadbeef value in reinit adminq
during software reset.
Without this patch it is possible to trigger VF reset procedure
during reinit adminq. This resulted in an incorrect reading of
value from the AQP registers and generated the -53 error.
Fixes: 5c3c48ac6b ("i40e: implement virtual device interface")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When XDP was configured on a system with large number of CPUs
and X722 NIC there was a call trace with NULL pointer dereference.
i40e 0000:87:00.0: failed to get tracking for 256 queues for VSI 0 err -12
i40e 0000:87:00.0: setup of MAIN VSI failed
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:i40e_xdp+0xea/0x1b0 [i40e]
Call Trace:
? i40e_reconfig_rss_queues+0x130/0x130 [i40e]
dev_xdp_install+0x61/0xe0
dev_xdp_attach+0x18a/0x4c0
dev_change_xdp_fd+0x1e6/0x220
do_setlink+0x616/0x1030
? ahci_port_stop+0x80/0x80
? ata_qc_issue+0x107/0x1e0
? lock_timer_base+0x61/0x80
? __mod_timer+0x202/0x380
rtnl_setlink+0xe5/0x170
? bpf_lsm_binder_transaction+0x10/0x10
? security_capable+0x36/0x50
rtnetlink_rcv_msg+0x121/0x350
? rtnl_calcit.isra.0+0x100/0x100
netlink_rcv_skb+0x50/0xf0
netlink_unicast+0x1d3/0x2a0
netlink_sendmsg+0x22a/0x440
sock_sendmsg+0x5e/0x60
__sys_sendto+0xf0/0x160
? __sys_getsockname+0x7e/0xc0
? _copy_from_user+0x3c/0x80
? __sys_setsockopt+0xc8/0x1a0
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f83fa7a39e0
This was caused by PF queue pile fragmentation due to
flow director VSI queue being placed right after main VSI.
Because of this main VSI was not able to resize its
queue allocation for XDP resulting in no queues allocated
for main VSI when XDP was turned on.
Fix this by always allocating last queue in PF queue pile
for a flow director VSI.
Fixes: 41c445ff0f ("i40e: main driver core")
Fixes: 74608d17fe ("i40e: add support for XDP_TX action")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Before this patch VF interface vanished when
maximum queue number was exceeded. Driver tried
to add next queues even if there was not enough
space. PF sent incorrect number of queues to
the VF when there were not enough of them.
Add an additional condition introduced to check
available space in 'qp_pile' before proceeding.
This condition makes it impossible to add queues
if they number is greater than the number resulting
from available space.
Also add the search for free space in PF queue
pair piles.
Without this patch VF interfaces are not seen
when available space for queues has been
exceeded and following logs appears permanently
in dmesg:
"Unable to get VF config (-32)".
"VF 62 failed opcode 3, retval: -5"
"Unable to get VF config due to PF error condition, not retrying"
Fixes: 7daa6bf329 ("i40e: driver core headers")
Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Recently simplified i40e_rebuild causes that FW sometimes
is not ready after NVM update, the ping does not return.
Increase the delay in case of EMP reset.
Old delay of 300 ms was introduced for specific cards for 710 series.
Now it works for all the cards and delay was increased.
Fixes: 1fa51a650e ("i40e: Add delay after EMP reset for firmware to recover")
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Return value from user_regset_copyin() directly instead of taking this
in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
A previous commit added this feature, but it inadvertently used the wrong
variable to show/store the setting from/to, victimized by copy/paste. Fix
it up so that the async_depth sysfs interface reads and writes from the
right setting.
Fixes: 07757588e5 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215485
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For a single pinctrl mode, it is not necessary to define pinctrl
properties as the tools always allow pinctrl properties.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220119015325.2438277-1-robh@kernel.org
Some of the GPIO pins on the Unmatched are wire up to control the power
of the board, indicate that in the device tree.
Signed-off-by: Ron Economos <w6rz@comcast.net>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The config SYSCON never existed in the kernel repository; so, the select of
that config in ./drivers/soc/canaan/Kconfig has no effect.
Presumably, this was just some mistake, assuming some symmetry in handling
and naming of configs that simply does not exist.
Remove this useless select of a non-existing config.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, SBI APIs accept a hartmask that is generated from struct
cpumask. Cpumask data structure can hold upto NR_CPUs value. Thus, it
is not the correct data structure for hartids as it can be higher
than NR_CPUs for platforms with sparse or discontguous hartids.
Remove all association between hartid mask and struct cpumask.
Reviewed-by: Anup Patel <anup@brainfault.org> (For Linux RISC-V changes)
Acked-by: Anup Patel <anup@brainfault.org> (For KVM RISC-V changes)
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The spinwait booting method should only be used for platforms with older
firmware without SBI HSM extension or M-mode firmware because spinwait
method can't support cpu hotplug, kexec or sparse hartid. It is better
to move the entire spinwait implementation to its own config which can
be disabled if required. It is enabled by default to maintain backward
compatibility and M-mode Linux.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The booting hart selection via lottery is only useful for SMP systems.
Moreover, the lottery selection is only necessary for systems using
spinwait booting method. It is better to keep the entire lottery
selection together so that it can be disabled in future.
Move the lottery selection code to under CONFIG_SMP.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The __cpu_up_stack/task_pointer array is only used for spinwait method
now. The per cpu array based lookup is also fragile for platforms with
discontiguous/sparse hartids. The spinwait method is only used for
M-mode Linux or older firmwares without SBI HSM extension. For general
Linux systems, ordered booting method is preferred anyways to support
cpu hotplug and kexec.
Make sure that __cpu_up_stack/task_pointer is only used for spinwait
method. Take this opportunity to rename it to
__cpu_spinwait_stack/task_pointer to emphasize the purpose as well.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The HSM extension information log also prints the SBI version v0.2. This
is misleading as the underlying firmware SBI version may be different
from v0.2.
Remove the unncessary printing of SBI version.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently both order booting and spinwait approach uses a per cpu
array to update stack & task pointer. This approach will not work for the
following cases.
1. If NR_CPUs are configured to be less than highest hart id.
2. A platform has sparse hartid.
This issue can be fixed for ordered booting as the booting cpu brings up
one cpu at a time using SBI HSM extension which has opaque parameter
that is unused until now.
Introduce a common secondary boot data structure that can store the stack
and task pointer. Secondary harts will use this data while booting up
to setup the sp & tp.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Use the api number 134 for KVM_GET_XSAVE2, instead of 42, which has been
used by KVM_GET_XSAVE.
Also, fix the WARNINGs of the underlines being too short.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Message-Id: <20220120045003.315177-1-wei.w.wang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following warning appears when executing
make -C tools/testing/selftests/kvm
include/x86_64/processor.h:290:2: warning: 'ecx' may be used uninitialized in this
function [-Wmaybe-uninitialized]
asm volatile("cpuid"
^~~
lib/x86_64/processor.c:1523:21: note: 'ecx' was declared here
uint32_t eax, ebx, ecx, edx, max_ext_leaf;
Just initialize ecx to remove this warning.
Fixes: c8cc43c1ea ("selftests: KVM: avoid failures due to reserved HyperTransport region")
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220119140325.59369-1-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following warning appears when executing
make -C tools/testing/selftests/kvm
x86_64/pmu_event_filter_test.c: In function 'vcpu_supports_intel_br_retired':
x86_64/pmu_event_filter_test.c:241:28: warning: variable 'cpuid' set but not used [-Wunused-but-set-variable]
241 | struct kvm_cpuid2 *cpuid;
| ^~~~~
x86_64/pmu_event_filter_test.c: In function 'vcpu_supports_amd_zen_br_retired':
x86_64/pmu_event_filter_test.c:258:28: warning: variable 'cpuid' set but not used [-Wunused-but-set-variable]
258 | struct kvm_cpuid2 *cpuid;
| ^~~~~
Just delete the unused variables to stay away from warnings.
Fixes: dc7e75b3b3ee ("selftests: kvm/x86: Add test for KVM_SET_PMU_EVENT_FILTER")
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220119133910.56285-1-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SBI 0.1 specification is obsolete. The current version is 0.3.
Hence we should not rely by default on SBI 0.1 being implemented.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- fix the error checks of platform_get_irq() in gpio-mpc8xxx and gpio-idt3243x
-----BEGIN PGP SIGNATURE-----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=il0X
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Fix the same error check issue in two drivers. And then the drivers
are fixed even more because the first patches were incomplete which I
missed.
Summary:
- fix the error checks of platform_get_irq() in gpio-mpc8xxx and
gpio-idt3243x"
* tag 'gpio-fixes-for-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mpc8xxx: Fix an ignored error return from platform_get_irq()
gpio: idt3243x: Fix an ignored error return from platform_get_irq()
gpio: idt3243x: Fix IRQ check in idt_gpio_probe
gpio: mpc8xxx: Fix IRQ check in mpc8xxx_probe
bio_truncate() clears the buffer outside of last block of bdev, however
current bio_truncate() is using the wrong offset of page. So it can
return the uninitialized data.
This happened when both of truncated/corrupted FS and userspace (via
bdev) are trying to read the last of bdev.
Reported-by: syzbot+ac94ae5f68b84197f41c@syzkaller.appspotmail.com
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/875yqt1c9g.fsf@mail.parknet.co.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The code that uses the pointer info has been removed in 7326e382c2
("fanotify: report old and/or new parent+name in FAN_RENAME event").
and fanotify_event_info() doesn't change 'event', so the declaration and
assignment of info can be removed.
Eliminate the following clang warning:
fs/notify/fanotify/fanotify_user.c:161:24: warning: variable ‘info’ set
but not used
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Yuji Ishikawa says:
====================
net: stmmac: dwmac-visconti: Fix bit definitions and clock configuration for RMII mode
This series is a fix for RMII/MII operation mode of the dwmac-visconti driver.
It is composed of two parts:
* 1/2: fix constant definitions for cleared bits in ETHER_CLK_SEL register
* 2/2: fix configuration of ETHER_CLK_SEL register for running in RMII operation mode.
net: stmmac: dwmac-visconti: Fix bit definitions for ETHER_CLK_SEL
v1 -> v2:
- added Fixes tag to commit message
net: stmmac: dwmac-visconti: Fix clock configuration for RMII mode
v1 -> v2:
- added Fixes tag to commit message
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bit pattern of the ETHER_CLOCK_SEL register for RMII/MII mode should be fixed.
Also, some control bits should be modified with a specific sequence.
Fixes: b38dd98ff8 ("net: stmmac: Add Toshiba Visconti SoCs glue driver")
Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
by Venky Shankar. It solves some long-standing issues with using
different auth entities and/or mounting different CephFS filesystems
from the same cluster, remounting and also misleading /proc/mounts
contents. The existing syntax of course remains to be maintained.
On top of that, there is a couple of fixes for edge cases in quota
and a new mount option for turning on unbuffered I/O mode globally
instead of on a per-file basis with ioctl(CEPH_IOC_SYNCIO).
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmHpP5ATHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi0TgB/480i2lPHgA3ujJNqo5Q6z+W0vtTA2+
Wx+4rAUgIESJVunbFxvecPbzyUXTe7wWFI11TCVHPpf6GyIIDTD+uHd3kKWtLsfL
Zkk1/2PN9Q5Dh29R+N8rP9NaP8tIaTQjyiO3iqmRZlo+k0Z/lYtWUb+fUP05XlVY
ML/ktW543tkKeYwl3SWdW5MqAAOVGDbTt+L51CraDhVoiUac5ptkP+cmDmIqsnGa
ZHVqpwugxgndEIyuBHDLBps+5/LrEaL10xDhGcMtP9hwGYhyNr6Yj+azfGtHWwOi
jdVsdHDiecUBVtGyZ351Y4pCMOmP0uJif6MOUZFXYYSSeUBUhH8UjgEi
=jcte
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The highlight is the new mount "device" string syntax implemented by
Venky Shankar. It solves some long-standing issues with using
different auth entities and/or mounting different CephFS filesystems
from the same cluster, remounting and also misleading /proc/mounts
contents. The existing syntax of course remains to be maintained.
On top of that, there is a couple of fixes for edge cases in quota and
a new mount option for turning on unbuffered I/O mode globally instead
of on a per-file basis with ioctl(CEPH_IOC_SYNCIO)"
* tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client:
ceph: move CEPH_SUPER_MAGIC definition to magic.h
ceph: remove redundant Lsx caps check
ceph: add new "nopagecache" option
ceph: don't check for quotas on MDS stray dirs
ceph: drop send metrics debug message
rbd: make const pointer spaces a static const array
ceph: Fix incorrect statfs report for small quota
ceph: mount syntax module parameter
doc: document new CephFS mount device syntax
ceph: record updated mon_addr on remount
ceph: new device mount syntax
libceph: rename parse_fsid() to ceph_parse_fsid() and export
libceph: generalize addr/ip parsing based on delimiter
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmHo9UgACgkQiiy9cAdy
T1FG4Av9Gx2v8bmcjZgnbOLcDmhPZPIR2DaBOZ+79RfSy0FgeFo76Mp9YuiAmqH3
8DqinvWax0xzGiOSMQxODWK1c71TT7oRm5XqloxtLp6Upy61q7IB6f6gXKy566v1
/KB2XkUZQgfXr9inCOflzQDBVhl9UqPWmWV++VDpZkv4HAGOppcu7hloXyraG4cc
C4DzljiWGwWs875qcC8M533z3gEwpUB8o7M9hseLbEH8earUHzlLIp++HCuKfHJP
W7U13nPgZXQ4I1SxDdzt3ZXcwZKRKvbG7MdK4KnftkeKRfobz92IxWDxj7VrM/iN
5mxLExYjaZGSuYkquKiQy2RtaXudv3U51stxo2jWLvoRc9c8ogT5luwIQ31apRm+
PRiJew2XdeWnV9IYMJOpRTcLE7eVscU3oP2kW8kL8uoe1CwbabOnz5jpQ6ioA08t
8GgVvDWY7o2/bquDmiIsnaWnVnOWw4ms4vQTjecJgltpAHDQf9RwrSVZYAu+J+JY
sWW5IGCT
=WqhR
-----END PGP SIGNATURE-----
Merge tag '5.17-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- authentication fix
- RDMA (smbdirect) fixes (including fix for a memory corruption, and
some performance improvements)
- multiple improvements for multichannel
- misc fixes, including crediting (flow control) improvements
- cleanup fixes, including some kernel doc fixes
* tag '5.17-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd: (23 commits)
ksmbd: fix guest connection failure with nautilus
ksmbd: uninitialized variable in create_socket()
ksmbd: smbd: fix missing client's memory region invalidation
ksmbd: add smb-direct shutdown
ksmbd: smbd: change the default maximum read/write, receive size
ksmbd: smbd: create MR pool
ksmbd: add reserved room in ipc request/response
ksmbd: smbd: call rdma_accept() under CM handler
ksmbd: limits exceeding the maximum allowable outstanding requests
ksmbd: move credit charge deduction under processing request
ksmbd: add support for smb2 max credit parameter
ksmbd: set 445 port to smbdirect port by default
ksmbd: register ksmbd ib client with ib_register_client()
ksmbd: Fix smb2_get_name() kernel-doc comment
ksmbd: Delete an invalid argument description in smb2_populate_readdir_entry()
ksmbd: Fix smb2_set_info_file() kernel-doc comment
ksmbd: Fix buffer_check_err() kernel-doc comment
ksmbd: fix multi session connection failure
ksmbd: set both ipv4 and ipv6 in FSCTL_QUERY_NETWORK_INTERFACE_INFO
ksmbd: set RSS capable in FSCTL_QUERY_NETWORK_INTERFACE_INFO
...
The warning messages can be invoked from the data path for every packet
transmitted through an ip6gre netdev, leading to high CPU utilization.
Fix that by rate limiting the messages.
Fixes: 09c6bbf090 ("[IPV6]: Do mandatory IPv6 tunnel endpoint checks in realtime")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Tested-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The link extended sub-states are assigned as enum that is an integer
size but read from a union as u8, this is working for small values on
little endian systems but for big endian this always give 0. Fix the
variable in the union to match the enum size.
Fixes: ecc31c6024 ("ethtool: Add link extended state")
Signed-off-by: Moshe Tal <moshet@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A problem was encountered with the Bel-Fuse 1GBT-SFP05 SFP module (which
is a 1 Gbps copper module operating in SGMII mode with an internal
BCM54616S PHY device) using the Xilinx AXI Ethernet MAC core, where the
module would work properly on the initial insertion or boot of the
device, but after the device was rebooted, the link would either only
come up at 100 Mbps speeds or go up and down erratically.
I found no meaningful changes in the PHY configuration registers between
the working and non-working boots, but the status registers seemed to
have a lot of error indications set on the SERDES side of the device on
the non-working boot. I suspect the problem is that whatever happens on
the SGMII link when the device is rebooted and the FPGA logic gets
reloaded ends up putting the module's onboard PHY into a bad state.
Since commit 6e2d85ec05 ("net: phy: Stop with excessive soft reset")
the genphy_soft_reset call is not made automatically by the PHY core
unless the callback is explicitly specified in the driver structure. For
most of these Broadcom devices, there is probably a hardware reset that
gets asserted to reset the PHY during boot, however for SFP modules
(where the BCM54616S is commonly found) no such reset line exists, so if
the board keeps the SFP cage powered up across a reboot, it will end up
with no reset occurring during reboots.
Hook up the genphy_soft_reset callback for BCM54616S to ensure that a
PHY reset is performed before the device is initialized. This appears to
fix the issue with erratic operation after a reboot with this SFP
module.
Fixes: 6e2d85ec05 ("net: phy: Stop with excessive soft reset")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
