atomic_flush seems to be the right place, right after we commit the
plane updates. Again use the fullproof version, since the pipe might
be off.
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-6-git-send-email-daniel.vetter@ffwll.ch
The drm core has a nice ready-made helper for exactly the simple case
where it should fire on the next vblank.
Note that arming the vblank event in _begin is probably too early, and
might easily result in the vblank firing too early, before the new set
of planes are actually disabled. But that's kinda a minor issue
compared to just outright hanging userspace.
v2: Be more robust and either arm, when the CRTC is on, or just send
the event out right away.
v3: Just unconditionally send out the event directly, for safety -
arcpgu doesn't even have vblank support ...
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-3-git-send-email-daniel.vetter@ffwll.ch
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-4-git-send-email-daniel.vetter@ffwll.ch
Rockchip DRM does not yet build properly for ARM64, but we might as well
get the printf formatting correct now, to avoid the following warnings:
drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c: In function 'rockchip_drm_fbdev_create':
drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c:111:2: warning: format '%d' expects argument of type 'int', but argument 8 has type 'size_t' [-Wformat=]
DRM_DEBUG_KMS("FB [%dx%d]-%d kvaddr=%p offset=%ld size=%d\n",
^
drivers/gpu/drm/rockchip/rockchip_drm_gem.c: In function 'rockchip_gem_alloc_buf':
drivers/gpu/drm/rockchip/rockchip_drm_gem.c:41:3: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'size_t' [-Wformat=]
DRM_ERROR("failed to allocate %#x byte dma buffer", obj->size);
^
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465494392-92489-1-git-send-email-briannorris@chromium.org
atomic_flush seems to be the right place, but I'm not entirely sure
whether this will catch them all. It could be that when disabling the
crtc we'll miss the vblank.
While at it nuke the dummy functions.
v2: Be more robust and either arm, when the CRTC is on, or just send
the event out right away.
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-5-git-send-email-daniel.vetter@ffwll.ch
No idea how exactly fsl-du commits hw state changes, but here in flush
is probably the safest place.
While at it nuke the dummy functions.
v2: Be more robust and either arm, when the CRTC is on, or just send
the event out right away.
Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-4-git-send-email-daniel.vetter@ffwll.ch
This is just used for cleanup in preclose, and with the reworked event
handling code this is now done properly by the core.
Nuke it!
But it also shows that arc totally fails at sending out drm events for
flips. Next patch will hack that up.
v2: Rebase it!
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-2-git-send-email-daniel.vetter@ffwll.ch
Drivers transitioning to atomic might not yet want to enable full
DRIVER_ATOMIC support when it's not entirely working. But using atomic
internally makes a lot more sense earlier.
Instead of spreading such flags to more places I figured it's simpler
to just check for mode_config->funcs->atomic_commit, and use atomic
paths if that is set. For the only driver currently transitioning
(i915) this does the right thing.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-23-git-send-email-daniel.vetter@ffwll.ch
All outputs have a 1:1 relationship between connectors and encoders
and the driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementations and let the core call
drm_atomic_helper_best_encoder() for us.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-12-git-send-email-boris.brezillon@free-electrons.com
For all outputs except DSI we have a 1:1 relationship between connectors
and encoders and the driver is relying on the atomic helpers: we can
drop the custom ->best_encoder() and let the core call
drm_atomic_helper_best_encoder() for us.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-9-git-send-email-boris.brezillon@free-electrons.com
We have a 1:1 relationship between connectors and encoders and the
driver is relying on the atomic helpers: we can drop the custom
->best_encoder() implementation and let the core call
drm_atomic_helper_best_encoder() for us.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-8-git-send-email-boris.brezillon@free-electrons.com
The PM core introduced the ability to keep devices runtime suspended
during the entire system suspend/resume process with commit aae4518b31
("PM / sleep: Mechanism to avoid resuming runtime-suspended devices
unnecessarily"). Before this so-called "direct-complete" procedure was
introduced, devices were always runtime resumed only to be immediately
put to sleep again using their ->suspend hook. Direct-complete is
enabled by returning a positive value from the ->prepare hook. The PCI
core usually does this automatically.
Direct-complete is only available for a device if all children use it as
well. Currently we cannot support direct-complete for DRM drivers
because the DRM core automatically registers multiple DRM minors which
belong to device class drm_class, and drm_class uses a struct dev_pm_ops
which lacks the ->prepare callback.
While this could be solved by adding the missing ->prepare callback,
closer inspection shows that there are no DRM drivers left which declare
the legacy ->suspend and ->resume callbacks in their drm_driver struct.
The last ones to remove them were i915 with commit 1751fcf9f9
("drm/i915: Fix module initialisation, v2.") and exynos with commit
e7fefb1d5a ("drm/exynos: remove legacy ->suspend()/resume()").
Consequently the struct dev_pm_ops of drm_class is now dead code. Remove
it. If no dev_pm_ops is declared for a device, the PM core automatically
enables direct-complete for it, thereby making that mechanism available
to the parent DRM PCI devices.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/da848fcd5ca72a35d9a722e644719977a47bb7ba.1465382836.git.lukas@wunner.de
* Update MAINTAINERS file for omapdrm and tilcdc
* PLL refactoring to allow versatile use of the PLL clocks
* Public omapdss header refactoring to separate omapfb and omapdrm
* Gamma table support
* Support reset GPIO and vcc regulator in omapdrm's panel-dpi
* Minor cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=dSIF
-----END PGP SIGNATURE-----
Merge tag 'omapdrm-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm changes for 4.8
* Update MAINTAINERS file for omapdrm and tilcdc
* PLL refactoring to allow versatile use of the PLL clocks
* Public omapdss header refactoring to separate omapfb and omapdrm
* Gamma table support
* Support reset GPIO and vcc regulator in omapdrm's panel-dpi
* Minor cleanups
* tag 'omapdrm-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (69 commits)
drm/omapdrm: Implement gamma_lut atomic crtc properties
drm/omapdrm: Workaround for errata i734 (LCD1 Gamma) in DSS dispc
drm/omapdrm: Add gamma table support to DSS dispc
drm: drm_helper_crtc_enable_color_mgmt() => drm_crtc_enable_color_mgmt()
drm/omap: rename panel/encoder Kconfig names
drm: omapdrm: add DSI mapping
drm: omapdrm: Remove unused omap_framebuffer_bo function
drm: omapdrm: Remove unused omap_gem_tiled_size function
drm: omapdrm: panel-lgphilips-lb035q02: Remove unused backlight GPIO
drm/omap: panel-dpi: implement support for a vcc regulator
drm/omap: panel-dpi: make (limited) use of a reset gpio
devicetree/bindings: add reset-gpios and vcc-supply for panel-dpi
MAINTAINERS: Add maintainer for TI LCDC DRM driver
MAINTAINERS: Add maintainer for OMAP DRM driver
drm/omap: fix pitch round-up
drm/omap: remove align_pitch()
drm/omap: remove unnecessary pitch round-up
drm/omap: remove unneeded gpio includes
drm/omap: Remove the video/omapdss.h and move it's content to local header file
[media] omap_vout: Switch to use the video/omapfb_dss.h header file
...
Virtio-gpu updates
* 'virtio-gpu-for-airlied' of git://git.kraxel.org/linux:
virtio-gpu: use src not crtc
virtio-gpu: pick up hotspot from framebuffer
add cursor hotspot to drm_framebuffer
virtio-gpu: switch to atomic cursor interfaces
virtio-gpu: add atomic_commit function
virtio-gpu: fix output lookup
- some polish for the guc code (Dave Gordon)
- big refactoring of gen9 display clock handling code (Ville)
- refactoring work in the context code (Chris Wilson)
- give encoder/crtc/planes useful names for debug output (Ville)
- improvements to skl/kbl wm computation code (Mahesh Kumar)
- bunch of smaller improvements all over as usual
* tag 'drm-intel-next-2016-06-06' of git://anongit.freedesktop.org/drm-intel: (64 commits)
drm/i915: Update DRIVER_DATE to 20160606
drm/i915: Extract physical display dimensions from VBT
drm/i915: Silence "unexpected child device config size" for VBT on 845g
drm/i915/skl+: Use scaling amount for plane data rate calculation (v4)
drm/i915/skl+: calculate plane pixel rate (v4)
drm/i915/skl+: calculate ddb minimum allocation (v6)
drm/i915: Don't try to calculate relative data rates during hw readout
drm/i915: Only ignore eDP ports that are connected
drm/i915: Update GEN6_PMINTRMSK setup with GuC enabled
drm/i915: kill STANDARD/CURSOR plane screams
drm/i915: Give encoders useful names
drm/i915: Give meaningful names to all the planes
drm/i915: Don't leak primary/cursor planes on crtc init failure
drm/i915: Set crtc->name to "pipe A", "pipe B", etc.
drm/i915: Use plane->name in debug prints
drm/i915: Use crtc->name in debug messages
drm/i915: Reject modeset if the dotclock is too high
drm/i915: Fix NULL pointer deference when out of PLLs in IVB
drm/i915/ilk: Don't disable SSC source if it's in use
drm/i915/bxt: Sanitize CDCLK to fix breakage during S4 resume
...
As promised, piles of prep work all around:
- drm_atomic_state rework, prep for nonblocking commit helpers
- fence patches from Gustavo and Christian to prep for atomic fences and
some cool work in ttm/amdgpu from Christian
- drm event prep for both nonblocking commit and atomic fences
- Gustavo seems on a crusade against the non-kms-native version of the
vblank functions.
- prep work from Boris to nuke all the silly ->best_encoder
implementations we have (we really only need that for truly dynamic
cases like dvi-i vs dvi-d or dp mst selecting the right transcoder on
intel)
- prep work from Laurent to rework the format handling functions
- and few small things all over
* tag 'topic/drm-misc-2016-06-07' of git://anongit.freedesktop.org/drm-intel: (47 commits)
drm/dsi: Implement set tear scanline
drm/fb_cma_helper: Implement fb_mmap callback
drm/qxl: Remove useless drm_fb_get_bpp_depth() call
drm/ast: Remove useless drm_fb_get_bpp_depth() call
drm/atomic: Fix remaining places where !funcs->best_encoder is valid
drm/core: Change declaration for gamma_set.
Documentation: add fence-array to kernel DocBook
drm/shmobile: use drm_crtc_vblank_{get,put}()
drm/radeon: use drm_crtc_vblank_{get,put}()
drm/qxl: use drm_crtc_vblank_{get,put}()
drm/atmel: use drm_crtc_vblank_{get,put}()
drm/armada: use drm_crtc_vblank_{get,put}()
drm/amdgpu: use drm_crtc_vblank_{get,put}()
drm/virtio: use drm_crtc_send_vblank_event()
drm/udl: use drm_crtc_send_vblank_event()
drm/qxl: use drm_crtc_send_vblank_event()
drm/atmel: use drm_crtc_send_vblank_event()
drm/armada: use drm_crtc_send_vblank_event()
drm/doc: Switch to sphinx/rst fixed-width quoting
drm/doc: Drop kerneldoc for static functions in drm_irq.c
...
lockless gem bo freeing patches (and the oddball related patch) for all
the drivers who's maintainers are asleep at the helm - includes you ;-)
I based this on top of drm-fixes to include Chris' fix for the cma issue.
* tag 'topic/lockless-gem-bo-freeing-2016-06-01' of git://anongit.freedesktop.org/drm-intel: (21 commits)
drm/arcpgu: Use lockless gem BO free callback
drm/sun4i: Use lockless gem BO free callback
drm/omapdrm: Nuke dummy fb->dirty callback
drm/msm: Nuke dummy fb->dirty callback
drm/rockchip: Use cma gem vm ops
drm/sti: Use lockless gem BO free callback
drm: sti: remove useless call to dev->struct_mutex
drm/virtio: Use lockless gem BO free callback
drm/tilcdc: Use lockless gem BO free callback
drm/shmob: Use lockless gem BO free callback
drm/rockchip: Use lockless gem BO free callback
drm/rcar-du: Use lockless gem BO free callback
drm/qxl: Use lockless gem BO free callback
drm/nouveau: Use lockless gem BO free callback
drm/mga200g: Use lockless gem BO free callback
drm/fls-dcu: Use lockless gem BO free callback
drm/cirrus: Use lockless gem BO free callback
drm/bochs: Use lockless gem BO free callback
drm/atmel: Use lockless gem BO free callback
drm/ast: Use lockless gem BO free callback
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXVJo5AAoJEHm+PkMAQRiGjioH/3H8Q26FP83Bprhrh3y5EYmz
QSWbq5f5XHGVp4sqc45qdozklh11PrMPkNJQPT2HCTgmtzgeTX5EW9TFaQM/Ubrm
NeYnBW0tTcLP2PhfOyOIJOjE3R1oEYIRQ7zzdOZleViYaqAW2g0frYK0l8AY/KAv
z9mJ8s7xieqSzNTyKNfDPIciT/mO2KMbEHu92EiAkjeCfhuVxUO6PR4wLeZb/85H
I/cOFupU1166xeOZUR0lltvPMz8JznOUB0pg2Ma67TqsNGsPPfsmxEPFlALTTJk/
0V/hVyL4BgvO22LXwMoIxnUcwq/F3ZtlDJRhubeX7m5aS9x2Pb5mQ/g1ko0CXJA=
=5hXk
-----END PGP SIGNATURE-----
Backmerge tag 'v4.7-rc2' into drm-next
Daniel has a pull request that relies on stuff in fixes that are in rc2.
Provide a small convenience wrapper that transmits
a set_tear_scanline command.
v2:
* helper function suggested by Thierry
for set_tear_scanline
* Also includes small build fixes from Sumit Semwal.
v3: one scanline parameter suggested by jani
v4: passing the payload properly as suggested by jani
Cc: Archit Taneja <archit.taneja@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465285532-12676-1-git-send-email-simhavcs@gmail.com
In the absence of an fb_mmap callback, the fbdev code falls back to a
naive implementation which relies upon the DMA address being the same
as the physical address, and the buffer being physically contiguous
from there. Whilst this often holds for standard CMA allocations via
the platform's regular DMA ops, if the allocation is provided by an
IOMMU then such assumptions can fall apart spectacularly.
To resolve this, reroute the fb_mmap call to the appropriate DMA API
implementation, as per the other cma_helper calls.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/8fd95ac1440e0f01daad6d4380be3a4c8fa61055.1465301219.git.robin.murphy@arm.com
Adapt drm_pick_crtcs() and update_connector_routing() to fallback to
drm_atomic_helper_best_encoder() if funcs->best_encoder() is NULL so
that DRM drivers can leave this hook unassigned if they know they want
to use drm_atomic_helper_best_encoder().
Update the vtables documentation accordingly.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-2-git-send-email-boris.brezillon@free-electrons.com
Implement gamma_lut atomic crtc properties, set crtc gamma size to 256
for all crtcs and use drm_atomic_helper_legacy_gamma_set() as
gamma_set func. The tv-out crtc has 1024 element gamma table (with
10bit precision) in HW, but current Xorg server does not accept
anything else but 256 elements so that is used for all CRTCs. The dss
dispc API converts table of any length for HW and uses linear
interpolation in the process. The default gamma table is restored
if gamma_lut property is deleted.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Workaround for errata i734 in DSS dispc
- LCD1 Gamma Correction Is Not Working When GFX Pipe Is Disabled
For gamma tables to work on LCD1 the GFX plane has to be used at least
once after DSS HW has come out of reset. The workaround sets up a
minimal LCD setup with GFX plane and waits for one vertical sync irq
before disabling the setup and continuing with the context
restore. The physical outputs are gated during the operation.
For details see:
OMAP543x Multimedia Device Silicon Revision 2.0 Silicon Errata
Literature Number: SWPZ037E
Or some other relevant errata document for the DSS IP version.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add gamma table support to DSS dispc.
DSS driver initializes the default gamma table at component bind time
and holds a copy of all gamma tables in its internal data structure.
Each call to dispc_mgr_set_gamma() updates the internal table and
triggers write to the HW, if it is enabled. The tables are restored to
HW in PM resume callback. The drivers internal data structure match
the HW tables in size and in number of significant bits per color
component. The dispc_mgr_set_gamma() converts the size of any given
table for the internal data structure using linear interpolation.
Default gamma table is restored if NULL is given in place of gamma
lut.
dispc_mgr_gamma_size() gives HW gamma table size for the channel and
returns 0 if gamma table is not supported by the HW or the DSS driver.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add drm_crtc_enable_color_mgmt(), remove drm_helper_crtc_enable_color_mgmt()
and update drm/i915-driver (the only user of the old function).
The new function is more flexible. It allows driver to enable only the
features it has without forcing to enable all three color management
properties: degamma lut, csc matrix (ctm), and gamma lut.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Change return value to int to propagate errors from gamma_set,
and remove start parameter. Updates always use the full size,
and some drivers even ignore the start parameter altogether.
This is needed for atomic drivers, where an atomic commit can
fail with -EINTR or -ENOMEM and should be restarted. This is already
and issue for drm_atomic_helper_legacy_set_gamma, which this patch
fixes up.
Changes since v1:
- Fix compiler warning. (Emil)
- Fix commit message (Daniel)
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Mathieu Larouche <mathieu.larouche@matrox.com>
Cc: Thierry Reding <treding@nvidia.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Improve commit message a bit more, mention that this fixes
the helper.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/742944bc-9f41-1acb-df4f-0fd4c8a10168@linux.intel.com
Pick up the correct source rectangle from framebuffer.
Without this multihead setups are not working correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Do modesets first, then call drm_atomic_helper_commit_planes with
active_only = true. That way the outputs doesn't get disabled
temporarly on atomic commits.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
omapdrm is using much too generic Kconfig names for its panels and
encoders. Rename them to have "DRM_OMAP" in the name.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This sets proper connector type for DSI connected panels.
Signed-off-By: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The function is never used, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The function is never used, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The backlight GPIO was supported with platform data only. Now that the
driver only supports DT, the backlight GPIO is never initialized. Remove
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
To allow supporting displays that need some logic to enable power to the
display try to get a vcc-supply property from the device tree and drive
the resulting regulator accordingly.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Some displays have a reset input. To assert that the display is
functional the reset gpio must be deasserted.
Teach the driver to get and drive such a gpio accordingly.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
At the moment we calculate the buffer's pitch with:
pitch = width * DIV_ROUND_UP(bpp, 8)
For CLUT modes with bpp of 1/2/4/8 this gives wrong result, and the
correct pitch is:
pitch = DIV_ROUND_UP(width * bpp, 8)
In practice this doesn't change anything, as we don't support CLUT
modes, but it's better to have the pitch calculation correct.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The previous commit removed aligning the pitch to SGX's pitch
requirement from align_pitch(). What's left is effectively a function
that returns width * bytespp.
To clean up the driver, we can remove the function and have the
calculation inline in the two places which call align_pitch().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
omapdrm checks if the pixel stride is divisible by 8. This is meant to
ensure that the byte stride is 32, which is required by SGX.
The check is not correct, as it checks for pixels, not bytes, and thus
needlessly increases the stride for, e.g., NV12.
Also, SGX driver is not supported in the mainline, and the TI's SGX
driver nowadays does the memory allocation itself and doesn't rely on
omapdrm to figure out the correct pitch.
So we can just remove the whole roundup.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
encoder-opa362.c and panel-sharp-ls037v7dw01.c do not use the legacy
GPIO API, so we can remove the including of gpio.h and of_gpio.h.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Just fallout from switching from asciidoc to sphinx/rst.
v2: Found more. Also s/\//#/ in the vgpu ascii-art - sphinx treats
those as comments and switch to variable-width, which wreaks the
layout.
v3: Undo some of the hacks, rebasing onto latest version of Jani's
series fixed it.
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
At least in drm core we only document the driver interfaces using
kerneldoc. For internals an unstructured comment is good enough.
Fixes a warning from kernel-doc, too.
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464729075-22243-5-git-send-email-daniel.vetter@ffwll.ch
Move the contents of the video/omapdss.h header file to omapdrm/dss local
header file and remove the original global header. The omapfb stach is
using video/omapfb_dss.h so this change will complete the separation of the
two driver implementation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
All drivers to include the omapdrm/dss/omapdss.h header file. This header
includes the <video/omapdss.h>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Clean up the header files regarding to hdmi audio so the omap-hdmi-audio.h
file will only need to include the platform_data/omapdss.h file.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Mark Brown <broonie@kernel.org>
CC: Jyri Sarha <jsarha@ti.com>
CC: Liam Girdwood <liam.r.girdwood@linux.intel.com>
The default_device is no longer used, it is a leftower from legacy. The
else if (pdata->default_device) is always going to be false.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
In legacy mode (non DT mode) support only composite connector type. The
only user for this is rx51, using composite type.
Dropping the connector_type selection via pdata will allow cleanups in
omapdss (drm vs fbdev).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Some panel/encoder/connector driver includes omap-panel-data.h but they
do not need it. Remove the inclusion of video/omap-panel-data.h from these
drivers.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
* multiple compile break fixes for missing includes, bad kconfig dependencies.
* remove regulator API misuse causing deprecation warnings
* OMAP5 HDMI fixes for DDC and AVI infoframe
* OMAP4 HDMI fix for CEC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=usqk
-----END PGP SIGNATURE-----
Merge tag 'omapdrm-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-fixes
omapdrm fixes for 4.7
* multiple compile break fixes for missing includes, bad kconfig dependencies.
* remove regulator API misuse causing deprecation warnings
* OMAP5 HDMI fixes for DDC and AVI infoframe
* OMAP4 HDMI fix for CEC
* tag 'omapdrm-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
drm/omap: include gpio/consumer.h where needed
drm/omap: include linux/seq_file.h where needed
Revert "drm/omap: no need to select OMAP2_DSS"
drm/omap: Remove regulator API abuse
OMAPDSS: HDMI5: Change DDC timings
OMAPDSS: HDMI5: Fix AVI infoframe
drm/omap: fix OMAP4 hdmi_core_powerdown_disable()
drm/omap: Fix missing includes
drm/omapdrm: include pinctrl/consumer.h where needed
- add support for reading LVDS panel EDID over DDC
- enable UYVY/VYUY support
- add support for pixel clock polarity configuration
- honor the native-mode DT property for LVDS
- various fixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=EPQk
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2016-06-01' of git://git.pengutronix.de/git/pza/linux into drm-fixes
imx-drm updates
- add support for reading LVDS panel EDID over DDC
- enable UYVY/VYUY support
- add support for pixel clock polarity configuration
- honor the native-mode DT property for LVDS
- various fixes and cleanups
* tag 'imx-drm-next-2016-06-01' of git://git.pengutronix.de/git/pza/linux:
drm/imx: plane: Don't set plane->crtc in ipu_plane_update()
drm/imx: ipuv3-plane: Constify ipu_plane_funcs
drm/imx: imx-ldb: honor 'native-mode' property when selecting video mode from DT
drm/imx: parallel-display: remove dead code
drm/imx: use bus_flags for pixel clock polarity
drm/imx: ipuv3-plane: enable UYVY and VYUY formats
drm/imx: parallel-display: use of_graph_get_endpoint_by_regs helper
drm/imx: imx-ldb: use of_graph_get_endpoint_by_regs helper
dt-bindings: imx: ldb: Add ddc-i2c-bus property
drm/imx: imx-ldb: Add DDC support
The first one is making use of __drm_atomic_helper_crtc_destroy_state()
instead of duplicating its logic in atmel_hlcdc_crtc_reset() and
risking memory leaks if other objects are added to the common CRTC
state.
The second one is fixing a possible NULL pointer dereference.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=69hd
-----END PGP SIGNATURE-----
Merge tag 'drm-atmel-hlcdc-fixes/for-4.7-rc2' of github.com:bbrezillon/linux-at91 into drm-fixes
Two trivial bugfixes for the atmel-hlcdc driver.
The first one is making use of __drm_atomic_helper_crtc_destroy_state()
instead of duplicating its logic in atmel_hlcdc_crtc_reset() and
risking memory leaks if other objects are added to the common CRTC
state.
The second one is fixing a possible NULL pointer dereference.
* tag 'drm-atmel-hlcdc-fixes/for-4.7-rc2' of github.com:bbrezillon/linux-at91:
drm: atmel-hlcdc: fix a NULL check
drm: atmel-hlcdc: fix atmel_hlcdc_crtc_reset() implementation
"I have accumulated some cleanup patches for HDLCD, partly triggered by
Daniel Vetter's work on non-blocking atomic operations, that I would like
to integrate into v4.7. My first patch is important for the newly enabled
hibernate option for AArch64 on Juno, the others are fixing behaviour in
HDLCD and adding a debugfs entry to help track the underlying framebuffer
usage. I'm also taking one of Daniel's patches from his non-blocking series
to help with the integration of his patches later."
* 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld:
drm: hdlcd: Add information about the underlying framebuffers in debugfs
drm: hdlcd: Cleanup the atomic plane operations
drm/hdlcd: Fix up crtc_state->event handling
drm: hdlcd: Revamp runtime power management
Currently the plane's index is determined by walking the list of all
planes in the mode and finding the position of that plane in the list. A
linear walk, especially a linear walk within a linear walk as frequently
conceived by i915.ko [O(N^2)] quickly comes to dominate profiles.
The plane's index is constant for as long as no earlier planes are
removed from the list. For all drivers, planes are static, determined
at boot and then untouched until shutdown. In fact, there is no locking
provided to allow for dynamic removal of planes/encoders/crtcs.
v2: Convert drm_crtc_index() and drm_encoder_index() as well.
v3: Stop adjusting the indices upon removal; consider the list
construct-only.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[danvet: Fixup typo in kerneldoc that Matt spotted.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464375900-2542-1-git-send-email-chris@chris-wilson.co.uk
Now a drm_pending_event can either send a real drm_event or signal a
fence, or both. It allow us to signal via fences when the buffer is
displayed on the screen. Which in turn means that the previous buffer
is not in use anymore and can be freed or sent back to another driver
for processing.
v2: Comments from Daniel Vetter
- call fence_signal in drm_send_event_locked()
- remove unneeded !e->event check
v3: Remove drm_pending_event->destroy to fix a leak when e->file_priv
is not set.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> (v2)
[danvet: fix one e->destroy in arcpgu due to rebasing.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-13-git-send-email-daniel.vetter@ffwll.ch
Harden the plane_check() code to drop attempts at scaling because
that is not supported. Make hdlcd_plane_atomic_update() set the pitch
and line length registers that correctly reflect the plane's values.
And make hdlcd_crtc_mode_set_nofb() a helper function for
hdlcd_crtc_enable() rather than an exposed hook.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
event_list just reimplemented what drm_crtc_arm_vblank_event does. And
we also need to send out drm events when shutting down a pipe.
With this it's possible to use the new nonblocking commit support in
the helpers.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Because the HDLCD driver acts as a component master it can end
up enabling the runtime PM functionality before the encoders
are initialised. This can cause crashes if the component slave
never probes (missing module) or if the PM operations kick in
before the probe finishes.
Move the enabling of the runtime PM after the component master
has finished collecting the slave components and use the DRM
atomic helpers to suspend and resume the device.
Tested-by: Robin Murphy <Robin.Murphy@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
It's silly to have 2 mallocs when we could tie these two together.
Also, Gustavo adds another one in his per-crtc out-fence patches. And
I want to add more stuff here for nonblocking commit helpers.
In the future we can use this to store a pointer to the preceeding
state, making an atomic update entirely free-standing. This will be
needed to be able to queue them up with a depth > 1.
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-12-git-send-email-daniel.vetter@ffwll.ch
It's kinda pointless to have 2 separate mallocs for these. And when we
add more per-plane state in the future it's even more pointless.
Right now there's no such thing planned, but both Gustavo's per-crtc
fence patches, and some nonblocking commit helpers I'm playing around
with will add more per-crtc stuff. It makes sense to also consolidate
planes, just for consistency.
In the future we can use this to store a pointer to the preceeding
state, making an atomic update entirely free-standing. This will be
needed to be able to queue them up with a depth > 1.
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-11-git-send-email-daniel.vetter@ffwll.ch
It's kinda pointless to have 2 separate mallocs for these. And when we
add more per-connector state in the future it's even more pointless.
Right now there's no such thing planned, but both Gustavo's per-crtc
fence patches, and some nonblocking commit helpers I'm playing around
with will add more per-crtc stuff. It makes sense to also consolidate
connectors, just for consistency.
In the future we can use this to store a pointer to the preceeding
state, making an atomic update entirely free-standing. This will be
needed to be able to queue them up with a depth > 1.
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-10-git-send-email-daniel.vetter@ffwll.ch
... and use it in msm&vc4. Again just want to encapsulate
drm_atomic_state internals a bit.
The const threading is a bit awkward in vc4 since C sucks, but I still
think it's worth to enforce this. Eventually I want to make all the
obj->state pointers const too, but that's a lot more work ...
v2: Provide safe macro to wrap up the unsafe helper better, suggested
by Maarten.
v3: Fixup subject (Maarten) and spelling fixes (Eric Engestrom).
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464877304-4213-1-git-send-email-daniel.vetter@ffwll.ch
Mostly this is unexpected indents. But really it's just a
demonstration for my patch, all these issues have been found&fixed
using the correct source file and line number support I just added.
All line numbers have been perfectly accurate.
One issue looked a bit fishy in intel_lrc.c, where I don't quite grok
what sphinx is unhappy about. But since that file looks like it has
never seen a proper kernel-doc parser I figured better to fix in a
separate path.
v2: Use fancy new &drm_device->struct_mutex linking (Jani).
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: linux-doc@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
We want to hide drm_atomic_stat internals a bit better.
v2: Use drm_crtc_mask (Maarten).
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-7-git-send-email-daniel.vetter@ffwll.ch
We want to hide drm_atomic_state internals
v2: Review from Maarten:
- remove whitespace change in rockchip driver that slipped in.
- use drm_crtc_mask insted of open-coding it.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-4-git-send-email-daniel.vetter@ffwll.ch
This avois leaking drm_atomic_state internals into the helpers. The
only place where this still happens after this patch is drm_atomic_helper_swap_state().
It's unavoidable there, and maybe a good indicator we should actually
move that function into drm_atomic.c.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-2-git-send-email-daniel.vetter@ffwll.ch
The intention of using video=<connector>:<mode> is primarily to select
the user's preferred resolution at startup. Currently we always create a
new mode irrespective of whether the monitor has a native mode at the
desired resolution. This has the issue that we may then select the fake
mode rather the native mode during fb_helper->inital_config() and so
if the fake mode is invalid we then end up with a loss of signal. Oops.
This invalid fake mode would also be exported to userspace, who
potentially may make the same mistake.
To avoid this issue, we filter out the added command line mode if we
detect the desired resolution (and clock if specified) amongst the
probed modes. This fixes the immediate problem of adding a duplicate
mode, but perhaps more generically we should avoid adding a GTF mode if
the monitor has an EDID that is not GTF-compatible, or similarly for
CVT.
Was meant to fix a regression from
commit eaf99c749d
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Aug 6 10:08:32 2014 +0200
drm: Perform cmdline mode parsing during connector initialisation
but Radek explained that the original bug is no longer reproducible on
latest kernels.
v2: Explicitly delete our earlier cmdline mode
v3: Mode pruning should now be sufficient to delete stale cmdline modes
v4: Compute the vrefresh for the probed mode
Reported-by: Radek Dostál <rd@radekdostal.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Radek Dostál <rd@radekdostal.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Julia Lemire <jlemire@matrox.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Drop cc: stable since no longer a pressing bugfix, just
nice-to-have.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464774651-20376-1-git-send-email-chris@chris-wilson.co.uk
The VBT has these mysterious H/V image sizes as part of the display
timings. Looking at some dumps those appear to be the physical
dimensions in mm. Which makes sense since the timing descriptor matches
the format used by EDID detailed timing descriptor, which defines these
as "H/V Addressable Video Image Size in mm".
So let's use that information from the panel fixed mode to get the
physical dimensions for LVDS/eDP/DSI displays. And with that we can
fill out the display_info so that userspace can get at it via
GetConnector.
v2: Use (hi<<8)|lo instead of broken (hi<<4)+lo
Handle LVDS and eDP too
Cc: Stephen Just <stephenjust@gmail.com>
Tested-by: Stephen Just <stephenjust@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96255
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464685714-30507-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
My old 845g complains that the child_device_size inside its VBT,
version 110, is incorrect. Let's fiddle with the version matching such
that it works with this VBT (i.e. treat BIOS v110 as having the same size
as v108).
Fixes [drm:intel_bios_init] *ERROR* Unexpected child device config
size 27 (expected 33 for VBT version 110)
Whether this is correct, no one knows - but it works for this particular
machine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1464800923-6054-1-git-send-email-chris@chris-wilson.co.uk
