There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom. Noteworthy
driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree,
we have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an optimization,
and SCMI now supports the 3.1 version of the specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI drivers
- Memory controller updates for Tegra, and a few updates for other
platforms.
-----BEGIN PGP SIGNATURE-----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=XoLF
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.
Noteworthy driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the
soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree, we
have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an
optimization, and SCMI now supports the 3.1 version of the
specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
drivers
- Memory controller updates for Tegra, and a few updates for other
platforms"
* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
nvme-apple: fix sparse endianess warnings
soc/tegra: pmc: Document core domain fields
soc: qcom: pdr: use static for servreg_* variables
soc: imx: fix semicolon.cocci warnings
soc: renesas: R-Car V3U is R-Car Gen4
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
soc: imx: imx8m-blk-ctrl: set power device name
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc/tegra: pmc: Select REGMAP
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
...
-----BEGIN PGP SIGNATURE-----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=geQL
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the driver updates queued up for 5.19. This contains:
- NVMe pull requests via Christoph:
- tighten the PCI presence check (Stefan Roese)
- fix a potential NULL pointer dereference in an error path (Kyle
Miller Smith)
- fix interpretation of the DMRSL field (Tom Yan)
- relax the data transfer alignment (Keith Busch)
- verbose error logging improvements (Max Gurtovoy, Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni, Christoph)
- set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni)
- add support for TP4084 - Time-to-Ready Enhancements (Christoph)
- MD pull request via Song:
- Improve annotation in raid5 code, by Logan Gunthorpe
- Support MD_BROKEN flag in raid-1/5/10, by Mariusz Tkaczyk
- Other small fixes/cleanups
- null_blk series making the configfs side much saner (Damien)
- Various minor drbd cleanups and fixes (Haowen, Uladzislau, Jiapeng,
Arnd, Cai)
- Avoid using the system workqueue (and hence flushing it) in rnbd
(Jack)
- Avoid using the system workqueue (and hence flushing it) in aoe
(Tetsuo)
- Series fixing discard_alignment issues in drivers (Christoph)
- Small series fixing drivers poking at disk->part0 for openers
information (Christoph)
- Series fixing deadlocks in loop (Christoph, Tetsuo)
- Remove loop.h and add SPDX headers (Christoph)
- Various fixes and cleanups (Julia, Xie, Yu)"
* tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block: (72 commits)
mtip32xx: fix typo in comment
nvme: set non-mdts limits in nvme_scan_work
nvme: add support for TP4084 - Time-to-Ready Enhancements
nvme: split the enum used for various register constants
nbd: Fix hung on disconnect request if socket is closed before
nvme-fabrics: add a request timeout helper
nvme-pci: harden drive presence detect in nvme_dev_disable()
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
nvme: mark internal passthru request RQF_QUIET
nvme: remove unneeded include from constants file
nvme: add missing status values to verbose logging
nvme: set dma alignment to dword
nvme: fix interpretation of DMRSL
loop: remove most the top-of-file boilerplate comment from the UAPI header
loop: remove most the top-of-file boilerplate comment
loop: add a SPDX header
loop: remove loop.h
block: null_blk: Improve device creation with configfs
block: null_blk: Cleanup messages
block: null_blk: Cleanup device creation and deletion
...
-----BEGIN PGP SIGNATURE-----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=0Rw1
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Here are the core block changes for 5.19. This contains:
- blk-throttle accounting fix (Laibin)
- Series removing redundant assignments (Michal)
- Expose bio cache via the bio_set, so that DM can use it (Mike)
- Finish off the bio allocation interface cleanups by dealing with
the weirdest member of the family. bio_kmalloc combines a kmalloc
for the bio and bio_vecs with a hidden bio_init call and magic
cleanup semantics (Christoph)
- Clean up the block layer API so that APIs consumed by file systems
are (almost) only struct block_device based, so that file systems
don't have to poke into block layer internals like the
request_queue (Christoph)
- Clean up the blk_execute_rq* API (Christoph)
- Clean up various lose end in the blk-cgroup code to make it easier
to follow in preparation of reworking the blkcg assignment for bios
(Christoph)
- Fix use-after-free issues in BFQ when processes with merged queues
get moved to different cgroups (Jan)
- BFQ fixes (Jan)
- Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming,
Wolfgang, me)"
* tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits)
blk-mq: fix typo in comment
bfq: Remove bfq_requeue_request_body()
bfq: Remove superfluous conversion from RQ_BIC()
bfq: Allow current waker to defend against a tentative one
bfq: Relax waker detection for shared queues
blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE()
blk-throttle: Set BIO_THROTTLED when bio has been throttled
blk-cgroup: Remove unnecessary rcu_read_lock/unlock()
blk-cgroup: always terminate io.stat lines
block, bfq: make bfq_has_work() more accurate
block, bfq: protect 'bfqd->queued' by 'bfqd->lock'
block: cleanup the VM accounting in submit_bio
block: Fix the bio.bi_opf comment
block: reorder the REQ_ flags
blk-iocost: combine local_stat and desc_stat to stat
block: improve the error message from bio_check_eod
block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone
block: remove superfluous calls to blkcg_bio_issue_init
kthread: unexport kthread_blkcg
blk-cgroup: cleanup blkcg_maybe_throttle_current
...
Add two new opcodes that userspace can use for admin commands:
NVME_URING_CMD_ADMIN : non-vectroed
NVME_URING_CMD_ADMIN_VEC : vectored variant
Wire up support when these are issued on controller node(/dev/nvmeX).
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220520090630.70394-3-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out a helper consolidating the error checks, and fix typo in a
comment too. This is in preparation to support admin commands on this
path.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220520090630.70394-2-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In current implementation we set the non-mdts limits by calling
nvme_init_non_mdts_limits() from nvme_init_ctrl_finish().
This also tries to set the limits for the discovery controller which
has no I/O queues resulting in the warning message reported by the
nvme_log_error() when running blktest nvme/002: -
[ 2005.155946] run blktests nvme/002 at 2022-04-09 16:57:47
[ 2005.192223] loop: module loaded
[ 2005.196429] nvmet: adding nsid 1 to subsystem blktests-subsystem-0
[ 2005.200334] nvmet: adding nsid 1 to subsystem blktests-subsystem-1
<------------------------------SNIP---------------------------------->
[ 2008.958108] nvmet: adding nsid 1 to subsystem blktests-subsystem-997
[ 2008.962082] nvmet: adding nsid 1 to subsystem blktests-subsystem-998
[ 2008.966102] nvmet: adding nsid 1 to subsystem blktests-subsystem-999
[ 2008.973132] nvmet: creating discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN testhostnqn.
*[ 2008.973196] nvme1: Identify(0x6), Invalid Field in Command (sct 0x0 / sc 0x2) MORE DNR*
[ 2008.974595] nvme nvme1: new ctrl: "nqn.2014-08.org.nvmexpress.discovery"
[ 2009.103248] nvme nvme1: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
Move the call of nvme_init_non_mdts_limits() to nvme_scan_work() after
we verify that I/O queues are created since that is a converging point
for each transport where these limits are actually used.
1. FC :
nvme_fc_create_association()
...
nvme_fc_create_io_queues(ctrl);
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
2. PCIe:-
nvme_reset_work()
...
nvme_setup_io_queues()
nvme_create_io_queues()
nvme_alloc_queue()
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
3. RDMA :-
nvme_rdma_setup_ctrl
...
nvme_rdma_configure_io_queues
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
4. TCP :-
nvme_tcp_setup_ctrl
...
nvme_tcp_configure_io_queues
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
* nvme_scan_work()
...
nvme_validate_or_alloc_ns()
nvme_alloc_ns()
nvme_update_ns_info()
nvme_update_disk_info()
nvme_config_discard() <---
blk_queue_max_write_zeroes_sectors() <---
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add support for using longer timeouts during controller initialization
and letting the controller come up with namespaces that are not ready
for I/O yet. We skip these not ready namespaces during scanning and
only bring them online once anoter scan is kicked off by the AEN that
is set when the NRDY bit gets set in the I/O Command Set Independent
Identify Namespace Data Structure. This asynchronous probing avoids
blocking the kernel boot when controllers take a very long time to
recover after unclean shutdowns (up to minutes).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
The RDAMA and TCP transport both complete the timed out request in the
same manner and hence code is duplicated. Add and use the helper
nvmf_complete_timed_out_request() to remove the duplicate code.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
On our ZynqMP system we observe, that a NVMe drive that resets itself
while doing a firmware update causes a Kernel crash like this:
[ 67.720772] pcieport 0000:02:02.0: pciehp: Slot(2): Link Down
[ 67.720783] pcieport 0000:02:02.0: pciehp: Slot(2): Card not present
[ 67.720795] nvme 0000:04:00.0: PME# disabled
[ 67.720849] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP
[ 67.720853] nwl-pcie fd0e0000.pcie: Slave error
Analysis: When nvme_dev_disable() is called because of this PCIe hotplug
event, pci_is_enabled() is still true. And accessing the NVMe drive
which is currently not available as it's in reboot process causes this
"synchronous external abort" on this ARM64 platform.
This patch adds the pci_device_is_present() check as well, which returns
false in this "Card not present" hot-plug case. With this change, the
NVMe driver does not try to access the NVMe registers any more and the
FW update finishes without any problems.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In nvme_alloc_admin_tags, the admin_q can be set to an error (typically
-ENOMEM) if the blk_mq_init_queue call fails to set up the queue, which
is checked immediately after the call. However, when we return the error
message up the stack, to nvme_reset_work the error takes us to
nvme_remove_dead_ctrl()
nvme_dev_disable()
nvme_suspend_queue(&dev->queues[0]).
Here, we only check that the admin_q is non-NULL, rather than not
an error or NULL, and begin quiescing a queue that never existed, leading
to bad / NULL pointer dereference.
Signed-off-by: Kyle Smith <kyles@hpe.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Most of the internal passthru commands use __nvme_submit_sync_cmd()
interface. There are few places we open code the request submission :-
1. nvme_keep_alive_work(struct work_struct *work)
2. nvme_timeout(struct request *req, bool reserved)
3. nvme_delete_queue(struct nvme_queue *nvmeq, u8 opcode)
Mark the internal passthru request quiet so that we can skip the verbose
error message from nvme_log_error() in nvme_end_req() completion path,
this will be consistent with what we have in __nvme_submit_sync_cmd().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Log a few more path related status codes.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The nvme specification only requires qword alignment for segment
descriptors, and the driver already guarantees that. The spec has always
allowed user data to be dword aligned, which is what the queue's
attribute is for, so relax the alignment requirement to that value.
While we could allow byte alignment for some controllers when using
SGLs, we still need to support PRP, and that only allows dword.
Fixes: 3b2a1ebceb ("nvme: set dma alignment to qword")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
DMRSLl is in the unit of logical blocks, while max_discard_sectors is
in the unit of "linux sector".
Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
wire up support for async passthru that takes an array of buffers (using
iovec). Exposed via a new op NVME_URING_CMD_IO_VEC. Same 'struct
nvme_uring_cmd' is to be used with -
1. cmd.addr as base address of user iovec array
2. cmd.data_len as count of iovec array elements
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220511054750.20432-6-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce handler for fops->uring_cmd(), implementing async passthru
on char device (/dev/ngX). The handler supports newly introduced
operation NVME_URING_CMD_IO. This operates on a new structure
nvme_uring_cmd, which is similar to struct nvme_passthru_cmd64 but
without the embedded 8b result field. This field is not needed since
uring-cmd allows to return additional result via big-CQE.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220511054750.20432-5-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Divide the work into two helpers, namely nvme_alloc_user_request and
nvme_execute_user_rq. This is a prep patch, to help wiring up
uring-cmd support in nvme.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[axboe: fold in fix for assuming bio is non-NULL]
Link: https://lore.kernel.org/r/20220511054750.20432-4-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The new nvme-apple driver is missing a few conversions to and
from little-endian data:
drivers/nvme/host/apple.c:291:19: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned long long [usertype] prp1 @@ got restricted __le64 [usertype] prp1 @@
drivers/nvme/host/apple.c:291:19: sparse: expected unsigned long long [usertype] prp1
drivers/nvme/host/apple.c:291:19: sparse: got restricted __le64 [usertype] prp1
drivers/nvme/host/apple.c:292:19: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned long long [usertype] prp2 @@ got restricted __le64 [usertype] prp2 @@
drivers/nvme/host/apple.c:293:21: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned int [usertype] length @@ got restricted __le16 [usertype] length @@
drivers/nvme/host/apple.c:351:52: sparse: sparse: incorrect type in initializer (different base types) @@ expected unsigned int [usertype] next_dma_addr @@ got restricted __le64 [usertype] @@
drivers/nvme/host/apple.c:456:45: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le64 [usertype] @@ got unsigned int [addressable] [usertype] prp_dma @@
drivers/nvme/host/apple.c:459:31: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le64 [usertype] @@ got unsigned long long [assigned] [usertype] dma_addr @@
drivers/nvme/host/apple.c:474:25: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le64 [usertype] prp1 @@ got unsigned int [usertype] dma_address @@
drivers/nvme/host/apple.c:475:25: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le64 [usertype] prp2 @@ got unsigned int [usertype] first_dma @@
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- RTKit IPC library required to boot and communicate with
co-processors embedded inside Apple SoCs
- SART DMA address filter required to allow some DMA transactions for
the NVMe co-processor
- NVMe platform driver
The following minor changes since v3 on the mailing list have been
folded in:
- sart: %llx -> %pa for a phys_addr_t
- rtkit:/sart: Drop IS_ENABLED inside headers
- rtkit: Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL
- nvme: Set NVME_REQ_CANCELLED in the timeout handler
- nvme: Use DEFINE_SIMPLE_DEV_PM_OPS instead of #ifdef CONFIG_PM_SLEEP
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQRUAfN3OZ14tapALxsd6alOrecRcQUCYm/5lhMcc3ZlbkBzdmVu
cGV0ZXIuZGV2AAoJEB3pqU6t5xFxITsBAI02bdBvHQAFouu1WzhLzlAPNqjGv3Th
YFOJL4y2oyigAP9zkIGP0e1JcpApPxvlmQnM340ZY+TCth+ahoCWlS4VAg==
=b0QX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=gi38
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-rtkit-sart-nvme-for-5.19' of https://github.com/AsahiLinux/linux into arm/drivers
Apple SoC NVMe driver and dependencies:
- RTKit IPC library required to boot and communicate with
co-processors embedded inside Apple SoCs
- SART DMA address filter required to allow some DMA transactions for
the NVMe co-processor
- NVMe platform driver
The following minor changes since v3 on the mailing list have been
folded in:
- sart: %llx -> %pa for a phys_addr_t
- rtkit:/sart: Drop IS_ENABLED inside headers
- rtkit: Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL
- nvme: Set NVME_REQ_CANCELLED in the timeout handler
- nvme: Use DEFINE_SIMPLE_DEV_PM_OPS instead of #ifdef CONFIG_PM_SLEEP
* tag 'asahi-soc-rtkit-sart-nvme-for-5.19' of https://github.com/AsahiLinux/linux:
nvme-apple: Add initial Apple SoC NVMe driver
dt-bindings: nvme: Add Apple ANS NVMe
soc: apple: Add SART driver
dt-bindings: iommu: Add Apple SART DMA address filter
soc: apple: Add RTKit IPC library
soc: apple: Always include Makefile
Link: https://lore.kernel.org/r/20220505154020.84638-1-sven@svenpeter.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The nvme driver never sets a discard_alignment, so it also doens't need
to clear it to zero.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220418045314.360785-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme-fc appid support needs CONFIG_BLK_CGROUP_FC_APPID to work, so disable
the whole code if the option is not set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Apple SoCs such as the M1 come with an embedded NVMe controller that
is not attached to any PCIe bus. Additionally, it doesn't conform
to the NVMe specification and requires a bunch of changes to command
submission and IOMMU configuration to work.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Secure erase is a very different operation from discard in that it is
a data integrity operation vs hint. Fully split the limits and helper
infrastructure to make the separation more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2]
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.
The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check the max supported sectors for zone append based on
the block_device instead of having to poke into the block layer internal
request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Qemu unconditionally reports a UUID, which depending on the qemu version
is either all-null (which is incorrect but harmless) or contains a single
bit set for all controllers. In addition it can also optionally report
a eui64 which needs to be manually set. Disable namespace identifiers
for Qemu controlles entirely even if in some cases they could be set
correctly through manual intervention.
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
The MAXIO MAP1002/1202 controllers reports completely bogus Namespace
identifiers that even change after suspend cycles. Disable using
the Identifiers entirely.
Reported-by: 金韬 <me@kingtous.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: 金韬 <me@kingtous.cn>
Add a quirk to disable using and exporting namespace identifiers for
controllers where they are broken beyond repair.
The most directly visible problem with non-unique namespace identifiers
is that they break the /dev/disk/by-id/ links, with the link for a
supposedly unique identifier now pointing to one of multiple possible
namespaces that share the same ID, and a somewhat random selection of
which one actually shows up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Use the RQF_QUIET flag to skip the newly added verbose error reporting,
and set the flag in __nvme_submit_sync_cmd, which is used for most
internal passthrough requests where we do expect errors (e.g. due to
probing for optional functionality). This is similar to what the SCSI
verbose error logging does.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Alan Adamson <alan.adamson@oracle.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmJHUgMQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpgMOD/9J9mO8CQ3THnyJeZb8hy+k7fPHw+P3OrAR
umOea3ujoMqzJsd/aRenMMAHsr7Phnb5PmljvryOo59nvwxOZ5MIBzSf2H4qJ8U2
B4jGwESVW4OFNS6Mu+lgYH7XMyDHvqCSVdIhcnqkseoFyndpnTfsu4cCphqajVaP
gOmXLBSQAetULxMfbqm7ofKk8F7zA80LFbwVs1VWVnCMeLVDccmJJbfn97jDZaJc
rl8xmcvmarYLOTxDoOSdmfp4ek7QzRKQuKDlfvn1Xi+lDtkKAnYygMHhqQ0WYYc1
/jJEd3iLCeV0jYfsDpVq6n2KRAGPCtrP0HkujifMGtuL5N2MAn/Aq3Fqoztas1yK
p3T3SBIBVeznTtOXxl4Fm8tvim3i3rxn2vPdYnm/8uuNxqCQy78gVf5bPlLY+bzT
4ytrP7AUpyzFj5E+8F33mZd0Vj2AL1kvgjbfEWqyQdXu7zs98UJL3xWicLbrvt/E
nmdlZjOOBbEgV3vGQD5wTRvlsBJswtl4mHBpYYLzZtmDr8wZxHD3DCUuM1i4xyHG
qDxNTKME2KfCXA8DIlcPxOAnNeXtwW3J7KTDuPDwC6XW84hFiC2tkM5M8aWqRos+
GiRczSArhaomaGq8W+vRqgCnPQgFAIt+oyJ9aqen0xHG8qCOTv3N6mMTJk/uBnMI
qcfpguHp+g==
=0Axq
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block
Pull block driver fixes from Jens Axboe:
"Followup block driver updates and fixes for the 5.18-rc1 merge window.
In detail:
- NVMe pull request
- Fix multipath hang when disk goes live over reconnect (Anton
Eidelman)
- fix RCU hole that allowed for endless looping in multipath
round robin (Chris Leech)
- remove redundant assignment after left shift (Colin Ian King)
- add quirks for Samsung X5 SSDs (Monish Kumar R)
- fix the read-only state for zoned namespaces with unsupposed
features (Pankaj Raghav)
- use a private workqueue instead of the system workqueue in
nvmet (Sagi Grimberg)
- allow duplicate NSIDs for private namespaces (Sungup Moon)
- expose use_threaded_interrupts read-only in sysfs (Xin Hao)"
- nbd minor allocation fix (Zhang)
- drbd fixes and maintainer addition (Lars, Jakob, Christoph)
- n64cart build fix (Jackie)
- loop compat ioctl fix (Carlos)
- misc fixes (Colin, Dongli)"
* tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block:
drbd: remove check of list iterator against head past the loop body
drbd: remove usage of list iterator variable after loop
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
MAINTAINERS: add drbd co-maintainer
drbd: fix potential silent data corruption
loop: fix ioctl calls using compat_loop_info
nvme-multipath: fix hang when disk goes live over reconnect
nvme: fix RCU hole that allowed for endless looping in multipath round robin
nvme: allow duplicate NSIDs for private namespaces
nvmet: remove redundant assignment after left shift
nvmet: use a private workqueue instead of the system workqueue
nvme-pci: add quirks for Samsung X5 SSDs
nvme-pci: expose use_threaded_interrupts read-only in sysfs
nvme: fix the read-only state for zoned namespaces with unsupposed features
n64cart: convert bi_disk to bi_bdev->bd_disk fix build
xen/blkfront: fix comment for need_copy
xen-blkback: remove redundant assignment to variable i
nvme_mpath_init_identify() invoked from nvme_init_identify() fetches a
fresh ANA log from the ctrl. This is essential to have an up to date
path states for both existing namespaces and for those scan_work may
discover once the ctrl is up.
This happens in the following cases:
1) A new ctrl is being connected.
2) An existing ctrl is successfully reconnected.
3) An existing ctrl is being reset.
While in (1) ctrl->namespaces is empty, (2 & 3) may have namespaces, and
nvme_read_ana_log() may call nvme_update_ns_ana_state().
This result in a hang when the ANA state of an existing namespace changes
and makes the disk live: nvme_mpath_set_live() issues IO to the namespace
through the ctrl, which does NOT have IO queues yet.
See sample hang below.
Solution:
- nvme_update_ns_ana_state() to call set_live only if ctrl is live
- nvme_read_ana_log() call from nvme_mpath_init_identify()
therefore only fetches and parses the ANA log;
any erros in this process will fail the ctrl setup as appropriate;
- a separate function nvme_mpath_update()
is called in nvme_start_ctrl();
this parses the ANA log without fetching it.
At this point the ctrl is live,
therefore, disks can be set live normally.
Sample failure:
nvme nvme0: starting error recovery
nvme nvme0: Reconnecting in 10 seconds...
block nvme0n6: no usable path - requeuing I/O
INFO: task kworker/u8:3:312 blocked for more than 122 seconds.
Tainted: G E 5.14.5-1.el7.elrepo.x86_64 #1
Workqueue: nvme-wq nvme_tcp_reconnect_ctrl_work [nvme_tcp]
Call Trace:
__schedule+0x2a2/0x7e0
schedule+0x4e/0xb0
io_schedule+0x16/0x40
wait_on_page_bit_common+0x15c/0x3e0
do_read_cache_page+0x1e0/0x410
read_cache_page+0x12/0x20
read_part_sector+0x46/0x100
read_lba+0x121/0x240
efi_partition+0x1d2/0x6a0
bdev_disk_changed.part.0+0x1df/0x430
bdev_disk_changed+0x18/0x20
blkdev_get_whole+0x77/0xe0
blkdev_get_by_dev+0xd2/0x3a0
__device_add_disk+0x1ed/0x310
device_add_disk+0x13/0x20
nvme_mpath_set_live+0x138/0x1b0 [nvme_core]
nvme_update_ns_ana_state+0x2b/0x30 [nvme_core]
nvme_update_ana_state+0xca/0xe0 [nvme_core]
nvme_parse_ana_log+0xac/0x170 [nvme_core]
nvme_read_ana_log+0x7d/0xe0 [nvme_core]
nvme_mpath_init_identify+0x105/0x150 [nvme_core]
nvme_init_identify+0x2df/0x4d0 [nvme_core]
nvme_init_ctrl_finish+0x8d/0x3b0 [nvme_core]
nvme_tcp_setup_ctrl+0x337/0x390 [nvme_tcp]
nvme_tcp_reconnect_ctrl_work+0x24/0x40 [nvme_tcp]
process_one_work+0x1bd/0x360
worker_thread+0x50/0x3d0
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Make nvme_ns_remove match the assumptions elsewhere.
1) !NVME_NS_READY needs to be srcu synchronized to make sure nothing is
running in __nvme_find_path or nvme_round_robin_path that will
re-assign this ns to current_path.
2) Any matching current_path entries need to be cleared before removing
from the siblings list, to prevent calling nvme_round_robin_path with
an "old" ns that's off list.
3) Finally the list_del_rcu can happen, and then synchronize again
before releasing any reference counts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
A NVMe subsystem with multiple controller can have private namespaces
that use the same NSID under some conditions:
"If Namespace Management, ANA Reporting, or NVM Sets are supported, the
NSIDs shall be unique within the NVM subsystem. If the Namespace
Management, ANA Reporting, and NVM Sets are not supported, then NSIDs:
a) for shared namespace shall be unique; and
b) for private namespace are not required to be unique."
Reference: Section 6.1.6 NSID and Namespace Usage; NVM Express 1.4c spec.
Make sure this specific setup is supported in Linux.
Fixes: 9ad1927a3b ("nvme: always search for namespace head")
Signed-off-by: Sungup Moon <sungup.moon@samsung.com>
[hch: refactored and fixed the controller vs subsystem based naming
conflict]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
The left shift is followed by a re-assignment back to cc_css, the
assignment is redundant. Fix this by replacing the "<<=" operator with
"<<" instead.
This cleans up the clang scan build warning:
drivers/nvme/target/core.c:1124:10: warning: Although the value stored to 'cc_css' is used in the enclosing expression, the value is never actually read from 'cc_css' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Any attempt to flush kernel-global WQs has possibility of deadlock
so we should simply stop using them, instead introduce nvmet_wq
which is the generic nvmet workqueue for work elements that
don't explicitly require a dedicated workqueue (by the mere fact
that they are using the system_wq).
Changes were done using the following replaces:
- s/schedule_work(/queue_work(nvmet_wq, /g
- s/schedule_delayed_work(/queue_delayed_work(nvmet_wq, /g
- s/flush_scheduled_work()/flush_workqueue(nvmet_wq)/g
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=RAVX
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block
Pull block layer 64-bit data integrity support from Jens Axboe:
"This adds support for 64-bit data integrity in the block layer and in
NVMe"
* tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block:
crypto: fix crc64 testmgr digest byte order
nvme: add support for enhanced metadata
block: add pi for extended integrity
crypto: add rocksoft 64b crc guard tag framework
lib: add rocksoft model crc64
linux/kernel: introduce lower_48_bits function
asm-generic: introduce be48 unaligned accessors
nvme: allow integrity on extended metadata formats
block: support pi with extended metadata
-----BEGIN PGP SIGNATURE-----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=efaq
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block
Pull NVMe write streams removal from Jens Axboe:
"This removes the write streams support in NVMe. No vendor ever really
shipped working support for this, and they are not interested in
supporting it.
With the NVMe support gone, we have nothing in the tree that supports
this. Remove passing around of the hints.
The only discussion point in this patchset imho is the fact that the
file specific write hint setting/getting fcntl helpers will now return
-1/EINVAL like they did before we supported write hints. No known
applications use these functions, I only know of one prototype that I
help do for RocksDB, and that's not used. That said, with a change
like this, it's always a bit controversial. Alternatively, we could
just make them return 0 and pretend it worked. It's placement based
hints after all"
* tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block:
fs: remove fs.f_write_hint
fs: remove kiocb.ki_hint
block: remove the per-bio/request write hint
nvme: remove support or stream based temperature hint
Add quirks to not fail the initialization and to have quick resume
latency after cold/warm reboot.
Signed-off-by: Monish Kumar R <monish.kumar.r@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Allow reading /sys/module/nvme/parameters/use_threaded_interrupts to see
if the use_threaded_interrupts module parameter is in use.
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
commit 2f4c9ba23b ("nvme: export zoned namespaces without Zone Append
support read-only") marks zoned namespaces without append support
read-only. It does iso by setting NVME_NS_FORCE_RO in ns->flags in
nvme_update_zone_info and checking for that flag later in
nvme_update_disk_info to mark the disk as read-only.
But commit 73d90386b5 ("nvme: cleanup zone information initialization")
rearranged nvme_update_disk_info to be called before
nvme_update_zone_info and thus not marking the disk as read-only.
The call order cannot be just reverted because nvme_update_zone_info sets
certain queue parameters such as zone_write_granularity that depend on the
prior call to nvme_update_disk_info.
Remove the call to set_disk_ro in nvme_update_disk_info. and call
set_disk_ro after nvme_update_zone_info and nvme_update_disk_info to set
the permission for ZNS drives correctly. The same applies to the
multipath disk path.
Fixes: 73d90386b5 ("nvme: cleanup zone information initialization")
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
- Rewrite how munlock works to massively reduce the contention
on i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4ucgACgkQDpNsjXcp
gj69Wgf6AwqwmO5Tmy+fLScDPqWxmXJofbocae1kyoGHf7Ui91OK4U2j6IpvAr+g
P/vLIK+JAAcTQcrSCjymuEkf4HkGZOR03QQn7maPIEe4eLrZRQDEsmHC1L9gpeJp
s/GMvDWiGE0Tnxu0EOzfVi/yT+qjIl/S8VvqtCoJv1HdzxitZ7+1RDuqImaMC5MM
Qi3uHag78vLmCltLXpIOdpgZhdZexCdL2Y/1npf+b6FVkAJRRNUnA0gRbS7YpoVp
CbxEJcmAl9cpJLuj5i5kIfS9trr+/QcvbUlzRxh4ggC58iqnmF2V09l2MJ7YU3XL
v1O/Elq4lRhXninZFQEm9zjrri7LDQ==
=n9Ad
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
-----BEGIN PGP SIGNATURE-----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=993h
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe updates via Christoph:
- add vectored-io support for user-passthrough (Kanchan Joshi)
- add verbose error logging (Alan Adamson)
- support buffered I/O on block devices in nvmet (Chaitanya
Kulkarni)
- central discovery controller support (Martin Belanger)
- fix and extended the globally unique idenfier validation
(Christoph)
- move away from the deprecated IDA APIs (Sagi Grimberg)
- misc code cleanup (Keith Busch, Max Gurtovoy, Qinghua Jin,
Chaitanya Kulkarni)
- add lockdep annotations for in-kernel sockets (Chris Leech)
- use vmalloc for ANA log buffer (Hannes Reinecke)
- kerneldoc fixes (Chaitanya Kulkarni)
- cleanups (Guoqing Jiang, Chaitanya Kulkarni, Christoph)
- warn about shared namespaces without multipathing (Christoph)
- MD updates via Song with a set of cleanups (Christoph, Mariusz, Paul,
Erik, Dirk)
- loop cleanups and queue depth configuration (Chaitanya)
- null_blk cleanups and fixes (Chaitanya)
- Use descriptive init/exit names in virtio_blk (Randy)
- Use bvec_kmap_local() in drivers (Christoph)
- bcache fixes (Mingzhe)
- xen blk-front persistent grant speedups (Juergen)
- rnbd fix and cleanup (Gioh)
- Misc fixes (Christophe, Colin)
* tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block: (76 commits)
virtio_blk: eliminate anonymous module_init & module_exit
nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH
nvme: remove nvme_alloc_request and nvme_alloc_request_qid
nvme: cleanup how disk->disk_name is assigned
nvmet: move the call to nvmet_ns_changed out of nvmet_ns_revalidate
nvmet: use snprintf() with PAGE_SIZE in configfs
nvmet: don't fold lines
nvmet-rdma: fix kernel-doc warning for nvmet_rdma_device_removal
nvmet-fc: fix kernel-doc warning for nvmet_fc_unregister_targetport
nvmet-fc: fix kernel-doc warning for nvmet_fc_register_targetport
nvme-tcp: lockdep: annotate in-kernel sockets
nvme-tcp: don't fold the line
nvme-tcp: don't initialize ret variable
nvme-multipath: call bio_io_error in nvme_ns_head_submit_bio
nvme-multipath: use vmalloc for ANA log buffer
xen/blkfront: speed up purge_persistent_grants()
raid5: initialize the stripe_head embeeded bios as needed
raid5-cache: statically allocate the recovery ra bio
raid5-cache: fully initialize flush_bio when needed
raid5-ppl: fully initialize the bio in ppl_new_iounit
...
Start warning about exposing a namespace as multiple block devices,
and set a fixed deprecation release.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Just open code the allocation + initialization in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
They way how assigning the disk name and commenting on why it is done
is split over core.c and multipath.c seems to be rather confusing.
Now that ns_head->disk always exists we can do all the work in core.c
and have a single big comment explaining the issues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Revert commit 626851e922 ("nvmet: make discovery NQN configurable");
the interface was deemed incorrect and will be replaced with a different
one.
Fixes: 626851e922 ("nvmet: make discovery NQN configurable")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvmet_ns_changed states via lockdep that the ns->subsys->lock must be
held. The only caller of nvmet_ns_changed which does not acquire that
lock is nvmet_ns_revalidate. nvmet_ns_revalidate has 3 callers,
of which 2 do not acquire that lock: nvmet_execute_identify_cns_cs_ns
and nvmet_execute_identify_ns. The other caller
nvmet_ns_revalidate_size_store does acquire the lock.
Move the call to nvmet_ns_changed from nvmet_ns_revalidate to the callers
so that they can perform the correct locking as needed.
This issue was found using a static type-based analyser and manually
verified.
Reported-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
