Pull more drm updates from Dave Airlie:
"Looks like I missed a tegra feature request for next, but should still
be fine since it's pretty self contained.
Apart from that got a set of i915 and amdgpu fixes as per usual along
with a few misc fixes.
tegra:
- Tegra186 hardware cursor support
- better capability reporting for different SoC
- better framebuffer modifier support
- host1x fixes
ttm:
- fix unswappable BO handling
efifb:
- check for PCI before using it
amdgpu:
- Fixes for Aldebaran
- Display LTTPR fixes
- eDP fixes
- Fixes for Vangogh
- RAS fixes
- ASPM support
- Renoir SMU fixes
- Modifier fixes
- Misc code cleanups
- Freesync fixes
i915:
- Several fixes to GLK handling in recent display refactoring
- Rare watchdog timer race fix
- Cppcheck redundant condition fix
- Overlay error code propagation fix
- Documentation fix
- gvt: Remove one unused function warning
- gvt: Fix intel_gvt_init_device() return type
- gvt: Remove one duplicated register accessible check"
* tag 'drm-next-2021-04-30' of git://anongit.freedesktop.org/drm/drm: (111 commits)
efifb: Check efifb_pci_dev before using it
drm/i915: Fix docbook descriptions for i915_gem_shrinker
drm/i915: fix an error code in intel_overlay_do_put_image()
drm/i915/display/psr: Fix cppcheck warnings
drm/i915: Disable LTTPR detection on GLK once again
drm/i915: Restore lost glk ccs w/a
drm/i915: Restore lost glk FBC 16bpp w/a
drm/i915: Take request reference before arming the watchdog timer
drm/ttm: fix error handling if no BO can be swapped out v4
drm/i915/gvt: Remove duplicated register accessible check
drm/amdgpu/gmc9: remove dummy read workaround for newer chips
drm/amdgpu: Add mem sync flag for IB allocated by SA
drm/amdgpu: Fix SDMA RAS error reporting on Aldebaran
drm/amdgpu: Reset RAS error count and status regs
Revert "drm/amdgpu: workaround the TMR MC address issue (v2)"
drm/amd/display: 3.2.132
drm/amd/display: [FW Promotion] Release 0.0.62
drm/amd/display: add helper for enabling mst stream features
drm/amd/display: Report Proper Quantization Range in AVI Infoframe
drm/amd/display: Fix call to pass bpp in 16ths of a bit
...
Some of the H265 status flags are wrong. Redefine them to corespond to
Allwinner CedarC open source userspace library. Only one of these flags
is actually used and new value also matches value used in libvdpau-sunxi
library, which is proven to be working.
Note that wrong (old) value in right circumstances (in combination with
another H265 decoding bug) causes driver lock up. With this fix decoding
is still broken (green output) but at least driver doesn't lock up.
Fixes: 86caab29da ("media: cedrus: Add HEVC/H.265 decoding support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
devm_ioremap_resource() prints error message in itself. Remove the
dev_err call to avoid redundant error message.
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Do not modify imgu_pipe->nodes[inode].vdev_fmt.fmt.pix_mp, until the
format has been correctly validated.
Otherwise, even if we use a backup variable, there is a period of time
where imgu_pipe->nodes[inode].vdev_fmt.fmt.pix_mp might have an invalid
value that can be used by other functions.
Cc: stable@vger.kernel.org
Fixes: ad91849996 ("media: staging/intel-ipu3: Fix set_fmt error handling")
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
According to the v4l2 api, it is allowed to skip
setting a control if its contents haven't changed for performance
reasons: userspace should only update the controls that changed from
last frame rather then updating them all. Still some ancient code
that checks for mandatory controls has been left in this driver.
Remove it.
Fixes: cd33c83044 ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acquire the graph_mutex for traversing the media graph. This seems to have
been missing all the time.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If there in an error during a set_fmt, do not overwrite the previous
sizes with the invalid config.
Without this patch, v4l2-compliance ends up allocating 4GiB of RAM and
causing the following OOPs
[ 38.662975] ipu3-imgu 0000:00:05.0: swiotlb buffer is full (sz: 4096 bytes)
[ 38.662980] DMA: Out of SW-IOMMU space for 4096 bytes at device 0000:00:05.0
[ 38.663010] general protection fault: 0000 [#1] PREEMPT SMP
Cc: stable@vger.kernel.org
Fixes: 6d5f26f2e0 ("media: staging/intel-ipu3-v4l: reduce kernel stack usage")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
All Linux headers licensed under the GPL-2.0 must include a "WITH
Linux-syscall-note" extension in their SPDX license identifier, as
enforced by the scripts/headers_install.sh script. Fix the Intel IPU3
UAPI header currently stored with the driver in staging.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The CSI-2 receiver requires both its sink pad and its source pad to be
connected through enabled links in order to be started. Ensure this by
setting the MEDIA_PAD_FL_MUST_CONNECT flag on both pads.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The .link_setup() handler uses state->lock to protect the src_sd field.
This is only used in mipi_csis_s_stream(), which can't race
.link_setup() as the MC core prevents link setup when the pipeline is
streaming. Drop the lock.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If the .s_stream() handler fails after calling pm_runtime_get_sync(),
call pm_runtime_put() in the error path.
While at it add a few blank lines to make the code more readable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a description for enum values in hantro_enc_fmt,
in order to fix these warnings:
drivers/staging/media/hantro/hantro_hw.h:149: warning: Enum value 'RK3288_VPU_ENC_FMT_YUV420P' not described in enum 'hantro_enc_fmt'
drivers/staging/media/hantro/hantro_hw.h:149: warning: Enum value 'RK3288_VPU_ENC_FMT_YUV420SP' not described in enum 'hantro_enc_fmt'
drivers/staging/media/hantro/hantro_hw.h:149: warning: Enum value 'RK3288_VPU_ENC_FMT_YUYV422' not described in enum 'hantro_enc_fmt'
drivers/staging/media/hantro/hantro_hw.h:149: warning: Enum value 'RK3288_VPU_ENC_FMT_UYVY422' not described in enum 'hantro_enc_fmt'
While here, improve the kernel-doc style, adding an empty
line before the fields of the structs.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add reference counting for allocated syncpoints to allow keeping
them allocated while jobs are referencing them. Additionally,
clean up various places using syncpoint IDs to use host1x_syncpt
pointers instead.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The atomisp_set_fmt() function has multiple copies of the large
v4l2_format structure on its stack, resulting in a warning about
excessive stack usage in some rare randconfig builds.
drivers/staging/media/atomisp/pci/atomisp_cmd.c:5600:5: error: stack frame size of 1084 bytes in function 'atomisp_set_fmt' [-Werror,-Wframe-larger-than=]
Of this structure, only three members in the 'fmt.pix' member are
used, so simplify it by using the smaller v4l2_pix_format structure
directly. This reduces the stack usage to 612 bytes, and it could
be reduced further by only storing the three members that are used.
Link: https://lore.kernel.org/linux-media/20210226140524.3478346-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
VIDEO_ATOMISP depends on VIDEO_V4L2_SUBDEV_API, if VIDEO_V4L2_SUBDEV_API
is not selected, it will cause compilation error
drivers/staging/media/atomisp/pci/atomisp_cmd.c:6079:42: error:
‘struct v4l2_subdev_fh’ has no member named ‘pad’ atomisp_subdev_set_ffmt
(&asd->subdev, fh.pad, V4L2_SUBDEV_FORMAT_ACTIVE,
add auto select VIDEO_V4L2_SUBDEV_API if VIDEO_ATOMISP is selected
Link: https://lore.kernel.org/linux-media/20210210033830.961086-1-ztong0001@gmail.com
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some randconfig builds include ia_css_firmware.h without first
including linux/device.h:
In file included from atomisp/pci/mmu/sh_mmu_mrfld.c:23:
In file included from atomisp/pci/atomisp_compat.h:22:
In file included from atomisp/pci/atomisp_compat_css20.h:24:
In file included from atomisp/pci/ia_css.h:28:
In file included from atomisp/pci/ia_css_control.h:25:
drivers/staging/media/atomisp//pci/ia_css_firmware.h:52:29: error: declaration of 'struct device' will not be visible outside of this function [-Werror,-Wvisibility]
Add a forward declaration to avoid the warning.
Link: https://lore.kernel.org/linux-media/20210108082337.2305938-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
checkpatch.pl emits the following warning:
WARNING: Prefer using '"%s...", __func__' to using 'ov2722_remove', this function's name, in a string
+ dev_dbg(&client->dev, "ov2722_remove...\n");
This is just a "trace" call and therefore should be removed entirely;
ftrace should be used instead.
Link: https://lore.kernel.org/linux-media/20210106181158.2270-1-fil.kolev@gmail.com
Signed-off-by: Filip Kolev <fil.kolev@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are certain expressions in a condition in atomisp, where a boolean
variable is compared with true/false in forms such as (foo == true)
or (false != bar), which does not comply with the coding style rule by
checkpatch.pl (CHK: BOOL_COMPARISON), according to which the boolean
variables should be themselves used in the condition, rather than
comparing with true or false.
E.g. In drivers/staging/media/atomisp/pci/atomisp_compat_css20.c:
if (asd->stream_prepared == false) {
Can be replaced with:
if (!asd->stream_prepared) {
Replace such expressions with boolean variables appropriately.
Link: https://lore.kernel.org/linux-media/20201214132716.28157-1-yashsri421@gmail.com
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
