Multi-line comments were modified to conform to kernel conventions:
/*
* multi-line
* comments
*/
doc-test /** */ for some comments was removed.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This also gave me a warning with the assignment:
visorinput_dev->keycode = visorkbd_keycode;
because input_dev->keycode is NOT static but visorkbd_keycode now is, so
I went ahead and also added logic to stash away non-static copies of
visorkbd_keycode[] and visorkbd_ext_keycode[] within visorinput_devdata,
and use the copy to assign to visorinput_dev->keycode. This change is
also technically required, because user-space can remap keys, and we
don't want this to be shared with the other keyboard devices running on
the same system.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to be more consistent with kernel conventions used elsewhere,
I have re-ordered declarations in visorinput.c to follow this general
order (where possible):
* #defines
* struct/enum/union declarations
* static declarations (const if possible for all of them)
* forward function declarations where absolutely necessary
Exceptions were made for the static declarations like the driver
declaration, given that it depends on previously-defined callbacks.
So such declarations are at the end of visorinput.c.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
keyboardchannel.h and mousechannel.h are now included within
visorinput.c directly.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This visorhid driver provides a Human Interface Device, but is not at all
using HID, the protocol. It's a plain input driver, so for clarity, it is
being renamed to visorinput.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No need for serio.h to be included.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The most-noticed key that wasn't being mapped correctly was Right-Alt,
which is the AltGr key on many non-US keyboards, used to select many
extended characters.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Properly handle the return value from queue_delayed_work() - it's a
bool, not an int, so using a less than comparison isn't appropriate.
This mistake was found by David Binderman <dcb314@hotmail.com>.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't need the list of devices, we can loop through the one
provided by the network api and filter on ours.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
devnum pool and devnum are no longer needed.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The net device already has a name, so use that instead.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver create a host bus adapter device when s-Par sends a
device create message to create a storage adapter on the visorbus.
When the message is received by visorbus, the visorhba_probe function
is called and the hba device is created and managed by the visorhba
driver.
Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver provides mouse and keyboard input to Unisys s-Par
Partition Desktop application. This device is created by the
visorbus device.
Signed-off-by: Erik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53490b545c ("staging: unisys: move periodic_work.c into the visorbus directory")
has removed the visorutil directory but missed removing the reference in
the Makefile.
Fixes: 53490b545c ("staging: unisys: move periodic_work.c into the visorbus directory")
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no code to handle an error return in visornic, when it tries to
register with visorbus. This patch handles an error return from
visorbus_register_visor_driver() by dropping out of initialization.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In cases where visorbus is compiled directly into the kernel, if
visorbus registration fails for any reason, it is still possible for
other drivers to call visorbus_register_visor_driver(), which could
cause an oops. Prevent this by saving the result of the call to
create_bus() in a static variable, and return an error code when the bus
hasn't been registered successfully.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If there is an error in registering driver attributes, unregister
the driver as well.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The receive byte statistics was wrong in /proc/net/dev.
Move the collection of statistics after the proper amount
of bytes has been calculated and make sure you add it to
rx_bytes instead of just replacing it.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Noticed we were not unregistering the netdevice if we failed to
create the debugfs entries. This patch fixes that problem.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update documentation (including TODO) to reflect the current state of
the drivers.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1/ Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
mechanism for adding device-driver-discovered memory regions to the
kernel's direct map. This facility is used by the pmem driver to
enable pfn_to_page() operations on the page frames returned by DAX
('direct_access' in 'struct block_device_operations'). For now, the
'memmap' allocation for these "device" pages comes from "System
RAM". Support for allocating the memmap from device memory will
arrive in a later kernel.
2/ Introduce memremap() to replace usages of ioremap_cache() and
ioremap_wt(). memremap() drops the __iomem annotation for these
mappings to memory that do not have i/o side effects. The
replacement of ioremap_cache() with memremap() is limited to the
pmem driver to ease merging the api change in v4.3. Completion of
the conversion is targeted for v4.4.
3/ Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
driver, update the VFS DAX implementation and PMEM api to provide
persistence guarantees for kernel operations on a DAX mapping.
4/ Convert the ACPI NFIT 'BLK' driver to map the block apertures as
cacheable to improve performance.
5/ Miscellaneous updates and fixes to libnvdimm including support
for issuing "address range scrub" commands, clarifying the optimal
'sector size' of pmem devices, a clarification of the usage of the
ACPI '_STA' (status) property for DIMM devices, and other minor
fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=o57/
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"This update has successfully completed a 0day-kbuild run and has
appeared in a linux-next release. The changes outside of the typical
drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the
removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and
the introduction of ZONE_DEVICE + devm_memremap_pages().
Summary:
- Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
mechanism for adding device-driver-discovered memory regions to the
kernel's direct map.
This facility is used by the pmem driver to enable pfn_to_page()
operations on the page frames returned by DAX ('direct_access' in
'struct block_device_operations').
For now, the 'memmap' allocation for these "device" pages comes
from "System RAM". Support for allocating the memmap from device
memory will arrive in a later kernel.
- Introduce memremap() to replace usages of ioremap_cache() and
ioremap_wt(). memremap() drops the __iomem annotation for these
mappings to memory that do not have i/o side effects. The
replacement of ioremap_cache() with memremap() is limited to the
pmem driver to ease merging the api change in v4.3.
Completion of the conversion is targeted for v4.4.
- Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
driver, update the VFS DAX implementation and PMEM api to provide
persistence guarantees for kernel operations on a DAX mapping.
- Convert the ACPI NFIT 'BLK' driver to map the block apertures as
cacheable to improve performance.
- Miscellaneous updates and fixes to libnvdimm including support for
issuing "address range scrub" commands, clarifying the optimal
'sector size' of pmem devices, a clarification of the usage of the
ACPI '_STA' (status) property for DIMM devices, and other minor
fixes"
* tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits)
libnvdimm, pmem: direct map legacy pmem by default
libnvdimm, pmem: 'struct page' for pmem
libnvdimm, pfn: 'struct page' provider infrastructure
x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB
add devm_memremap_pages
mm: ZONE_DEVICE for "device memory"
mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h
dax: drop size parameter to ->direct_access()
nd_blk: change aperture mapping from WC to WB
nvdimm: change to use generic kvfree()
pmem, dax: have direct_access use __pmem annotation
dax: update I/O path to do proper PMEM flushing
pmem: add copy_from_iter_pmem() and clear_pmem()
pmem, x86: clean up conditional pmem includes
pmem: remove layer when calling arch_has_wmb_pmem()
pmem, x86: move x86 PMEM API to new pmem.h header
libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option
pmem: switch to devm_ allocations
devres: add devm_memremap
libnvdimm, btt: write and validate parent_uuid
...
visorbus_dev_groups is not referenced outside visorbus_main.c, so it can
be declared static.
Found using sparse.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds an module alias and a MODULE_DEVICE_TABLE to autoload the
visornic driver when an appropriate device is created by the visorbus.
Note, the correct way of fixing this is adding functionality to
scripts/mod/file2alias.c for the visorbus bus type.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
void pointers do not need to be cast to other pointer types.
The semantic patch used to find this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
*((T *)e)
|
((T *)x)[...]
|
((T *)x)->f
|
- (T *)
e
)
Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for deprecating ioremap_cache() convert its usage in
visorbus to memremap.
Cc: Benjamin Romer <benjamin.romer@unisys.com>
Cc: David Kershner <david.kershner@unisys.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Switch the visornic over to use napi. Currently there is a kernel
thread that sits and waits on a wait queue to get notified of incoming
virtual interrupts. It would be nice if we could handle frame reception
using the standard napi processing instead. This patch creates our napi
instance and has the rx thread schedule it
Given that the unisys hypervisor currently requires that queue servicing
be done by a polling loop that wakes up every 2ms, lets instead also
convert that to a timer, which is simpler, and allows us to remove all
the thread starting and stopping code.
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to unisys, the s_par hypervisor has a bug in which it never
triggers an interrupt. That makes the visornic effectively a 2ms poll
loop. In order to just have the rx thread shceduling a napi poll every
2ms, lets instead give it the chance to check the response queue for
data before we schedule. This helper provides that functionality
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code that tests for high and low xmit watermarks was consolidatedand
simplified. The output behavior should be identical, with the exception
of an off-by-one error being corrected in the tests done when the counters
overflowed.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* A skb->len error-check was enabled (removed from a "#ifdef DEBUG" block).
* Several unneeded "#ifdef DEBUG" blocks were removed.
* A dev_err() was converted to the more-appropriate netdev_err().
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously we simplified the serverdown function to basically turn it
into a dev_close(), but missed the analogous logic in visornic_resume()
(which is essentially the "book-end" of visornic_serverdown_complete()).
As a result, during IO partition recovery, the nic would go closed when
the IO partition went away, but would never be opened again when the IO
partition came back.
This patch changes visornic_resume() to use dev_open(), so that it once
again plays nicely with visornic_serverdown_complete(). Because
dev_open() forces us into the visornic_open() path, other logic in
visornic_resume() was no longer necessary, and lended to simplifying
visornic_resume() even more.
Fixes: 36645d72a377 ("staging: unisys: simplify visornic_serverdown_complete")
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because devdata->enab_dis_acked is the flag used to determine whether an
enable/disable operation to the IO partition has completed, it should
always be cleared prior to initiating the operation. The call added to
visornic_enable_with_timeout() added in this patch makes the usage there
consistent with visornic_disable_with_timeout().
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This makes sure the kthread name can't be parsed as a format string.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds modalias files that export the device UUID type to sysfs
so that udev can autoload the appropriate device driver on demand. Note
that is required a minor name change to the channel device sysfs files
which are currently named visorbus_dev_groups, and are now named
visorbus_channel_groups.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file has a lot of dead comments and needs to be cleaned up.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After IO partition recovery, it was possible to get into a situation where
a visornic device would repeatedly report:
NETDEV WATCHDOG: eth0 (): transmit queue 0 timed out
The actual problem would affect any visornic device that was rapidly
transmitting at the same time the IO partition was being recovered. Once
you hit the problem, the only way to resume use of the nic would be to
reboot the Linux client partition.
The problem was caused by chstat.sent_xmit and chstat.got_xmit_done NOT
getting cleared during IO partition recovery. This is necessary because
outstanding xmits would essentially be "abandoned" during such recovery.
These fields are now cleared in virtnic_serverdown_complete().
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Logic to check for failures of visorchannel_signalinsert() and
visorchannel_signalremove() were added, and a new sent_post_failed counter
tracks the number of times we failed to post a rcv buffer to the IO
partition.
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
visornic tx reset handling is done asynchronously via a workqueue in
visornic_timeout_reset(). As a result, it needs to use rtnl_lock() /
rtnl_unlock() to lock against possible simultaneous close() of the network
device.
(I consulted the bnx2 driver as a model here, as that driver also does
its tx reset handling asynchronously, just like visornic does. See
bnx2_tx_timeout() and bnx2_reset_task().)
Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When s-Par is in polling mode it checks every 2 ms to see if there is
a response from the IO service partition in the queue. Currently it
just reads one entry per 2 ms, this needs to be changed so it drains
the queue on each check.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The netdev we're testing for can't be removed, because its never
unregistered, so don't bother checking for it
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All it does is return no supported. Removing the function entirely
accomplishes the same thing
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dev_trans_start does this for us now
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using NETDEV_TX_BUSY is tricky. Its meant for situations where the error
in question is transient and quickly resolved. But the driver rarely is
able to know that to a certainty. And in the case of visornic, it just
uses it without any care for that, in the hopes that it won't loose frames,
even if the problem is that the skb is somehow malformed for the hardware.
If we get one of those kinds of skbs, NETDEV_TX_BUSY will just cause us to
spin, processing the same error over and over.
Fix it by dropping the frame, stopping the queue where appropriate, and
returning NETDEV_TX_OK
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we put them in the enable and disable paths, we don't need them in
several other places
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I don't see why the server should stop responding, or that we should just
give up if it does. Wait forever when enabling/disabling the visornic
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I don't see why serverdown should be async on a workqueue. Just make it
synchronous, and remove some code in the process
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theres a lot of code duplication going on in visornic_serverdown_complete.
We should just be able to send it through the dev_close path and have it
do the right things.
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Its possible to overwrite the old task pointer in visornic_resume. Add a
check to guard against that and a warning if we find that its already
running
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
