Commit Graph

90181 Commits

Author SHA1 Message Date
Catalin Marinas
3676f9ef54 arm64: Move PTE_PROT_NONE higher up
PTE_PROT_NONE means that a pte is present but does not have any
read/write attributes. However, setting the memory type like
pgprot_writecombine() is allowed and such bits overlap with
PTE_PROT_NONE. This causes mmap/munmap issues in drivers that change the
vma->vm_pg_prot on PROT_NONE mappings.

This patch reverts the PTE_FILE/PTE_PROT_NONE shift in commit
59911ca432 (ARM64: mm: Move PTE_PROT_NONE bit) and moves PTE_PROT_NONE
together with the other software bits.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Steve Capper <steve.capper@linaro.org>
Cc: <stable@vger.kernel.org> # 3.11+
2013-11-29 15:22:59 +00:00
Catalin Marinas
4f00130b70 arm64: Use Normal NonCacheable memory for writecombine
This provides better performance compared to Device GRE and also allows
unaligned accesses. Such memory is intended to be used with standard RAM
(e.g. framebuffers) and not I/O.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-29 15:05:07 +00:00
Matt Fleming
1f3a8bae21 x86/efi: Fix earlyprintk off-by-one bug
Dave reported seeing the following incorrect output on his Thinkpad T420
when using earlyprintk=efi,

[    0.000000] efi: EFI v2.00 by Lenovo
                    ACPI=0xdabfe000  ACPI 2.0=0xdabfe014 SMBIOS=0xdaa9e000

The output should be on one line, not split over two. The cause is an
off-by-one error when checking that the efi_y coordinate hasn't been
incremented out of bounds.

Reported-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-11-28 20:16:56 +00:00
Matthew Leach
2dacab73dc arm64: debug: make aarch32 bkpt checking endian clean
The current breakpoint instruction checking code for A32 is not endian
clean. Fix this with appropriate byte-swapping when retrieving
instructions.

Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-28 18:01:29 +00:00
Matthew Leach
6a2e5e521c arm64: ptrace: fix compat registes get/set to be endian clean
On a BE system the wrong half of the X registers is retrieved/written
when attempting to get/set the value of aarch32 registers through
ptrace.

Ensure that types are the correct width so that the relevant
casting occurs.

Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-28 18:01:28 +00:00
Gerald Schaefer
9dda2769af crypto: s390 - Fix aes-xts parameter corruption
Some s390 crypto algorithms incorrectly use the crypto_tfm structure to
store private data. As the tfm can be shared among multiple threads, this
can result in data corruption.

This patch fixes aes-xts by moving the xts and pcc parameter blocks from
the tfm onto the stack (48 + 96 bytes).

Cc: stable@vger.kernel.org
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-11-28 22:25:16 +08:00
Linus Torvalds
a456c0d9c0 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc fixes from Ben Herrenschmidt:
 "The main thing that caused problem was that CONFIG_CPU_LITTLE_ENDIAN
  got turned on with allyesconfig and such, which is not a very good
  idea especially since it requires a newer toolchain than what most
  people have.

  So we turned it into a choice instead that defaults to big endian"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/windfarm: Fix XServe G5 fan control Makefile issue
  arch/powerpc/kernel: Use %12.12s instead of %12s to avoid memory overflow
  powerpc/signals: Improved mark VSX not saved with small contexts fix
  powerpc/kdump: Adding symbols in vmcoreinfo to facilitate dump filtering
  powerpc: allyesconfig should not select CONFIG_CPU_LITTLE_ENDIAN
  powerpc: Fix error when cross building TAGS & cscope
  powerpc/booke: Only check for hugetlb in flush if vma != NULL
  powerpc/85xx: typo in dts: "interupt" (four devices)
  powerpc/8xx: mfspr SPRN_TBRx in lieu of mftb/mftbu is not supported
  powerpc/corenet64: compile with CONFIG_E{5,6}500_CPU well
2013-11-27 20:32:38 -08:00
Roger Quadros
30023a7e4f ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)
Beagle (rev. C4) and Beagle-XM (all revs) need VAUX2 1.8V supply
for the USB PHY.

As the generic PHY driver can't handle more than one supply
at the moment, we configure this supply to be always on.
This will cause a very small power impact if the USB host subsystem
is not in use, about 76.86 micro-W + LDO power.

Older Beagle boards (prior to C4) don't have VAUX2 connected anywhere,
so there won't be any functional impact on those boards other than
some additional LDO power consumption.

Reported-by: Nishanth Menon <nm@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:39 -08:00
Javier Martinez Canillas
2f2befd820 ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi
On Device Tree boot the VDDS_DSI regulator is not linked to
the DPI device so omapfb driver probing fails with:

[    3.186035] OMAPFB: omapfb_probe
[    3.190704] omapdss DPI error: can't get VDDS_DSI regulator
[    3.196594] omapfb omapfb: failed to connect default display
[    3.202667] omapfb omapfb: failed to init overlay connections
[    3.208892] OMAPFB: free_resources
[    3.212493] OMAPFB: free all fbmem
[    3.216735] omapfb omapfb: failed to setup omapfb

As a workaround name the VPLL2 regulator from twl4030 as vdds_dsi
so getting the VDDS_DSI regulator will succeed on dpi_init_regulator().

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:39 -08:00
Enric Balletbo i Serra
caa73370ea ARM: dts: AM33XX IGEP0033: add USB support
Add node to support the USB Host and the USB OTG on the IGEP AQUILA
Processor Board.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:39 -08:00
Enric Balletbo i Serra
d8e5b2bdd3 ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support
The IGEP AQUILA EXPANSION has a 32KBit EEPROM for user data storage.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:38 -08:00
Enric Balletbo i Serra
f3689fd6dd ARM: dts: AM33XX BASE0033: add pinmux and user led support
Enable the user leds on the IGEP AQUILA EXPANSION. The has two leds,
one green and one red, that are controllable by software.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:38 -08:00
Enric Balletbo i Serra
0710b67986 ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display
Enable the hdmi output and the LCD Controller on IGEP AQUILA. Also
configure the correct pinmux for output of video data from the SoC
to the HDMI encoder.

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:38 -08:00
Javier Martinez Canillas
50592dc30c ARM: dts: omap3-igep0020: Add pinmuxing for DVI output
The IGEPv2 has a TFP410 DPI-to-DVI encoder attached to OMAP's
Display SubSystem (DSS).

Add mux setup for DSS pins and also for the GPIO 170 pin that
is used to ensure that the DVI-D is powered down on power up.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:38 -08:00
Javier Martinez Canillas
d526daebfd ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices
Add pin muxing support for IGEP boards i2c controllers.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:37 -08:00
Enric Balletbo i Serra
9aa36dfd3d ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor
Most of the boards are using the TI AM/DM37x processor, there is only a small
quantity of IGEP Processor Boards based on TI OMAP3530. So it's better use the
omap36xx.dtsi include instead of omap34xx.dtsi include. We can add support
for the 34xx based variant later on as needed.

To avoid confusion we have added to the model the (TI AM/DM37x) comment.

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
[tony@atomide.com: updated comments for the 34xx to 36xx include change]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:37 -08:00
Enric Balletbo i Serra
0e9fd77771 ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO
The LBEE1USJYC is a WiFi/BT combo module used on OMAP3-based IGEP boards. In
both cases, IGEPv2 Rev. C and IGEP COM MODULE, the module is connected using
the same MMC interface and uses the same GPIOs.

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:37 -08:00
Enric Balletbo i Serra
8559133d82 ARM: dts: omap3-igep: Fix bus-width for mmc1
Both, IGEPv2 and IGEP COM MODULE have a bus-width of 4 not 8, so fix this and
do not mux data pins from mmc1_data4 to mmc1_data7.

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:36 -08:00
Javier Martinez Canillas
11d3a7d6d4 ARM: OMAP2+: dss-common: change IGEP's DVI DDC i2c bus
IGEP's DVI connector's DDC pins are connected to OMAP's third i2c bus.

When booting with Device Trees the requested bus number is set to -1
which means that the bus number should be dynamically assigned. So the
third i2c bus has 2 has a bus number.

Since now only DT booting is supported for IGEP boards after commit
06ff74fd ("ARM: OMAP2+: remove legacy support for IGEP boards"), the
i2c bus number has to be changed.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:36 -08:00
Joel Fernandes
912e663127 ARM: OMAP2+: Disable POSTED mode for errata i103 and i767
Enabling of Posted mode is seen to cause problems on dmtimer modules on AM33xx
(much like other OMAPs).  Reference discussions on forums [1] [2]. Earlier
patch solving this on other OMAPs [3].

For OMAP SoCs with this errata, the fix has been to not enable Posted mode.
However, on some SoCs (atleast AM33xx) which carry this errata, Posted mode
is enabled on reset. So we not only need to ignore enabling of the POSTED bit
when the timer is requested, but also disable Posted mode if errata is present.

[1] http://e2e.ti.com/support/arm/sitara_arm/f/791/t/285744.aspx
[2] http://e2e.ti.com/support/arm/sitara_arm/f/791/t/270632.aspx
[3] http://www.spinics.net/lists/linux-omap/msg81770.html

Cc: stable@vgerk.kernel.org
Reported-by: Russ Dill <russ.dill@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-26 15:03:36 -08:00
Olof Johansson
a32555249f Ux500 defconfig patches for the v3.13 rc series:
- Allow creation and mounting of devtmpfs, which is used
   by OpenEmbedded root filesystems among others.
 
 - Enable CPUidle for the ux500, it has been accidentally
   disabled due to a Kconfig change.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSlQKrAAoJEEEQszewGV1zzIgQALmlu94FjOqccrZmkhY5RB+B
 dzqrxU+8xvHRyBk7CDigChbJADwgXduc0wL7O3ucvY0uelsDDVwmMcsEQwDk07du
 +5g8ih/7Qw32s0H9tQa3YXmgkJp4Lu9k88JKuuauJ4HeWAXaEyK2FsFf2PapIRh8
 9IO8j4dubvGeM53eaBq14iK//qiqIgtLYVOE0YOFaqZ0IGuTfd0FJx7gFnu7sF/h
 yea3ZI3fE4J7cj31P13ZLzdC2HtQuEjyCt4jtLHoR9BKgvB728r61wcyPq1OhrSF
 otzHNZk15NaQmnOMxuEPlcfINNA39/kosZOniExx9MTGqaa2cH7d0ZCC9VL9e7Zf
 CaXlB0+6Hh3ljgJVXG7OGi7cznJYSXFNjiIHck5leEY2Gq31FAFbdk4BWgzMT6zl
 vDbsqFMNnLSGWNdG2mJ/9K6ktVverE/zrq9FC+xhg6iWX4pFhYckcHkY/Rep+SlU
 QjvzLRQsCxn+KrQpMIe2yKw8ncGcKoiVJnwR8dGWf7rwudVabMYHJosAEq4bT+S8
 HZqNxolEHyqdqfoiI6h7EMJC0zzHO8dyz5q2e1Vl1LBYDj5lPXPlkkEEOjjE9m0g
 Py9RTeH8+LAUvT/r/VFbuc+eqcajNGkz40RJ5k5e8CYVxJRuqPP1zrRaqibeckKu
 6g+kVZLFsB/uFlVo0cJ+
 =jJ0N
 -----END PGP SIGNATURE-----

Merge tag 'ux500-defconfig-v3.13-rcs' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes

From Linus Walleij, Ux500 defconfig patches for the v3.13 rc series:

- Allow creation and mounting of devtmpfs, which is used
  by OpenEmbedded root filesystems among others.

- Enable CPUidle for the ux500, it has been accidentally
  disabled due to a Kconfig change.

* tag 'ux500-defconfig-v3.13-rcs' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: u8500_defconfig: add missing cpuidle option
  u8500_defconfig: allow creation and mounting of devtmpfs
2013-11-26 12:42:08 -08:00
Olof Johansson
75cc4d470c Ux500 fixes for the v3.13 series:
- Restore platform data for the (e)MMC/SD controllers, so they can
   pins and special flags properly like before.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSlQBpAAoJEEEQszewGV1zU9EP/3NLDoDHDbHoh7nQ552hHXOQ
 ychbZ1GstNnmNM1hnF4Ll+PDkAN2fppBCWyyOpvx/gX2jDrXTOfLJBJ2JtfuqQQ5
 l0FNwZ9aBZxOaUP0h2CxVjPn20RGkFNfAycWV2HVzN4waMFkOl28SZZWha20Efry
 Hcjmz8U8ABWclp1zo0cBkJpe7JyjRDWghewgKqvR9J6vYYiuB1N66QjPWf8Na/UK
 TlhYzRXXuWE+/HRJsBoAuF2ZaXAXN7zsgb1HmCbXrRdwNA+eVhnrJ0dEjQdSIFrP
 UOHUthYFd0nqbKqAf0EP3WB02n34WESYt9VLwXEH/Xr4eWQL3iutLPw9ZXcT6K+9
 NBOKLAbL5aiS5dcvvMs8uWwOF22w+/2pVW2CmILoUpGHiMfT9IxHNvBp57OXiE57
 jSqZLeCOMViTg0fzfET02mp8ujg9UnjD017kxpYV8hq7XgXP/n4jhAtlQyTZwU1V
 uQ/zIaoK3o9r34PznpwXzCIbaKFaBIHgGYn5JzQQwx8r46ogyvdqyrQ7DQX7W2CG
 tBhZ5E5uPSn5az9hDyRkLmP9DKZRxDVe2TMDtITlL3Up2msYYCDr0Jbibg4zoxyT
 1VOMSNO3IkQoZNpBA9W56T19PElGE+0rhZeXug3lwsDW89uobYZr82Iug9YnaHMD
 I7kwJQ2vq5Nh2k+ceXgg
 =VO2C
 -----END PGP SIGNATURE-----

Merge tag 'ux500-fixes-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes

From Linus Walleij, Ux500 fixes for the v3.13 series:

- Restore platform data for the (e)MMC/SD controllers, so they can
  pins and special flags properly like before.

* tag 'ux500-fixes-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  Revert "ARM: ux500: Stop passing MMC's platform data for Device Tree boots"
  Revert "ARM: ux500: Remove AUXDATA relating to SDI (MMC) clock-name bindings"
2013-11-26 12:41:13 -08:00
Linus Walleij
5281973012 Revert "ARM: ux500: Stop passing MMC's platform data for Device Tree boots"
This reverts commit 49c129519a.

The special settings for the SD/MMC card parameters that are not
yet fully agreed upon how to encode into the device tree went missing
with this commit. We need to first put it into the device tree,
and then remove the platform data.

Cc: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26 21:02:20 +01:00
Linus Walleij
1f202dea74 Revert "ARM: ux500: Remove AUXDATA relating to SDI (MMC) clock-name bindings"
This reverts commit ce16feb851.

This commit stopped tying down the name of the MMC/SD devices, but these
names are used in the pin control table, so the MMC/SD cards stopped
working.

Cc: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26 21:02:20 +01:00
Daniel Lezcano
59b023e9bf ARM: ux500: u8500_defconfig: add missing cpuidle option
With the commit d3f2950f2a, the option
ARM_U8500_CPUIDLE was added to the Kconfig but not reflected in the
default config file, hence the cpuidle driver is no longer enabled
since this commit.

Enable it again by adding the missing option in the default config file.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26 21:01:40 +01:00
Andi Shyti
a09b5add6f u8500_defconfig: allow creation and mounting of devtmpfs
This patch enables CONFIG_DETTMPFS and CONFIG_DEVTMPFS_MOUNT
flags for u8500 based devices.

In this way it's possible to create a tmpfs/ramfs already in the
early stages of the boot, allowing programs like udev/mdev to
populate the /dev directory.

Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-26 21:01:39 +01:00
Linus Torvalds
0e4b0743bb ARM: SoC fixes for 3.13-rc
Mostly bugfixes and a few small code removals. Worth pointing out is:
 
 - A handful of more fixes to get DT enablement working properly on OMAP,
   finding new breakage of things that don't work quite right yet without
   the traditional board files. I expect a bit more of this to come in this
   release as people test on their hardware.
 - Implementation of power_down_finish() on vexpress, to make kexec work and
   to stop the MCPM core to produce a warning (the warning was new to 3.13-rc1).
 - A handful of minor fixes for various platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSlPDhAAoJEIwa5zzehBx31dkP/RyP/esMHSBO5k36eB5V35HP
 /XcexbgnnH4tDVIKl28qH4/AjkT+09uNZ/QQpbshwmEHw1X5i+Dz455suBCdP0T7
 D+dHy/YCMDuMD7ow0OXWyyL9XbILV5VuBUogrdMN/RhzW2gIvIJRuHztKBQcU8sw
 L94OIPjlKX/YFrswuy0LXiIZt2Y2k3zFVFCwcxIpTB4F1avYj7luZjSX6y469TEB
 JyqfO+hooU/qtuc1pKTnBzKxVI7IVae3bberDhZCCKsAxP1/c5rSMy+nf60rqB4O
 nkT09sAr1SBVp6kB4Ql2yHGiZ5ozxSJbMQpx1v73wnS09wL9RXwR1GZPrNcDW90l
 qwergTrBxhYdzWyNAf/87DmQhB+Xf7kGqtUuRHleuuFhBOU29qR8oXQ6WMRkzHn9
 ZTSRZ99l5a3Aul8w+sEWzOKDdZfhycMsBNzWH8xpzR1fgH4N9GRJlSlqkWdrVGca
 QBNiC5bmtPpMgAHSkqK0Zu3rog83NX9NxcXG15FVEah7J4Q/VT/x51AIh0uSRBf0
 35lY86R79SQ3FYYyHhl2pyAw8nhY2EmofGSG2WJ+qfZ9TgDSDFdwA0hz2fp9nwFc
 Lwb3zGUEyGwgJ4I/n/cDGBfY2CsJuTEcDtB4sW1Vw4GrzMQvc43SWly6e5+RSAgq
 reP23wcD4/YKev7//zzI
 =zdhe
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Mostly bugfixes and a few small code removals.  Worth pointing out is:

   - A handful of more fixes to get DT enablement working properly on
     OMAP, finding new breakage of things that don't work quite right
     yet without the traditional board files.  I expect a bit more of
     this to come in this release as people test on their hardware.
   - Implementation of power_down_finish() on vexpress, to make kexec
     work and to stop the MCPM core to produce a warning (the warning
     was new to 3.13-rc1).
   - A handful of minor fixes for various platforms"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: bcm2835: add missing #xxx-cells to I2C nodes
  ARM: dts: Add max77686 RTC interrupt to cros5250-common
  ARM: vexpress/TC2: Implement MCPM power_down_finish()
  ARM: tegra: Provide dummy powergate implementation
  ARM: omap: fix warning with LPAE build
  ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init
  ARM: OMAP2+: Remove legacy mux code for display.c
  ARM: OMAP2+: Fix undefined reference to set_cntfreq
  gpio: twl4030: Fix passing of pdata in the device tree case
  gpio: twl4030: Fix regression for twl gpio output
  ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain
  ARM: dts: imx6qdl: disable spdif "rxtx5" clock option
  ARM: dts: Fix omap2 specific dtsi files by adding the missing entries
  ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x
  i2c: omap: Fix missing device tree flags for omap2
2013-11-26 11:18:37 -08:00
Stephen Warren
a31ab44ef5 ARM: bcm2835: add missing #xxx-cells to I2C nodes
The I2C controller node needs #address-cells and #size-cells properties,
but these are currently missing. Add them. This allows child nodes to be
parsed correctly.

Cc: stable@vger.kernel.org
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-11-25 21:56:00 -08:00
Kevin Hilman
192b4bcbbe The imx fixes for 3.13, part 2:
- Disable S/PDIF "rxtx5" clock option to fix the clocksource breakage
    introduced by S/PDIF driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJSjKihAAoJEFBXWFqHsHzOtPAIAKUpaOQ9LjbGM7TEhIStUY9Z
 GC7v1qDIikvo5iZJnTQgAD5+AFVdTbsufbyaMt1rvDmp6QCHr0Lsh+nzJEukTcLU
 rncE5GMOe7lEwgY5KI7iyw3C+Ow4VPND5gLAWYss2+Fd4wJ+4p2XiKaHtQp1KnI0
 L+g5RqqcV13DyP8usvJizmhQb1uhUReEIOIQJ21XszxiI8lPNa2YjoUCLs1aXrJv
 1/aQZKpzGKXAjrXRmnnJrpPyErs0aMzJ6OJwsac86RPZQSnvu20pdEQ8ze3XC5SA
 phEyUoLPWZcR58/Ot/mhuBHSQRXSENI45Y6CKwpGcoSYUOUnSNLmKZKkVgUIjYM=
 =hPqE
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-3.13-2' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes

The imx fixes for 3.13, part 2:
 - Disable S/PDIF "rxtx5" clock option to fix the clocksource breakage
   introduced by S/PDIF driver

* tag 'imx-fixes-3.13-2' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: dts: imx6qdl: disable spdif "rxtx5" clock option

Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-11-25 15:55:18 -08:00
Doug Anderson
c61248afa8 ARM: dts: Add max77686 RTC interrupt to cros5250-common
Without the interrupt you'll get problems if you enable
CONFIG_RTC_DRV_MAX77686.  Setup the interrupt properly in the device
tree.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: stable@vger.kernel.org
2013-11-25 15:14:41 -08:00
Tony Lindgren
edd5eb4e99 ARM: OMAP2+: Fix eMMC on n900 with device tree
Looks like we need to configure the regulators and use the pdata
quirk to make eMMC work with device tree.

It seems that mostly vaux3 is used, and only some earlier revisions
used vmmc2. This has been tested to work on devices where the
system_rev passed by the bootloader has versions 0x0010, 0x2101
and 0x2204.

Cc: devicetree@vger.kernel.org
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Sebastian Reichel <sre@debian.org>
[tony@atomide.com: updated with pinctrl changes and comments from Sebastian]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-25 14:23:45 -08:00
Tony Lindgren
26f67a3126 ARM: OMAP2+: Add fixed regulator to omap2plus_defconfig
We do not have REGULATOR_FIXED selected if no boards are selected
and we boot with device tree. This can cause various devices to
fail.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-25 14:23:45 -08:00
Tony Lindgren
7ce93f3186 ARM: OMAP2+: Fix more missing data for omap3.dtsi file
After dropping the duplicate data in hwmod that now should come from
the .dts files, I noticed few more entries missing. Let's add these
as otherwise devices relying on these won't work.

Looks like the side tone entries are bundled into the mcbsp1 to 3,
so that may needs some special handling in the hwmod code as it's
currently trying to look up mcbsp2_sidetone and mcbsp3_sidetone
entries.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-25 14:23:45 -08:00
Dave Martin
33cb667a00 ARM: vexpress/TC2: Implement MCPM power_down_finish()
This patch implements the power_down_finish() method for TC2, to
enable the kernel to confirm when CPUs are safely powered down.

The information required for determining when a CPU is parked
cannot be obtained from any single place, so a few sources of
information must be combined:

  * mcpm_cpu_power_down() must be pending for the CPU, so that we
    don't get confused by false STANDBYWFI positives arising from
    CPUidle.  This is detected by waiting for the tc2_pm use count
    for the target CPU to reach 0.

  * Either the SPC must report that the CPU has asserted
    STANDBYWFI, or the TC2 tile's reset control logic must be
    holding the CPU in reset.

    Just checking for STANDBYWFI is not sufficient, because this
    signal is not latched when the the cluster is clamped off and
    powered down: the relevant status bits just drop to zero.  This
    means that STANDBYWFI status cannot be used for reliable
    detection of the last CPU in a cluster reaching WFI.

This patch is required in order for kexec to work with MCPM on TC2.

MCPM code was changed in commit 0de0d64675 ('ARM: 7848/1: mcpm:
Implement cpu_kill() to synchronise on powerdown'), and since then it
will hit a WARN_ON_ONCE() due to power_down_finish not being implemented
on the TC2 platform.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-11-25 14:12:14 -08:00
Olof Johansson
5c1f34c42d Merge tag 'omap-for-v3.13/more-fixes-for-merge-window-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
Few more fixes for issues found booting older omaps using device tree.
Also few randconfig build fixes and removal of some dead code for omap4
as it no longer has legacy platform data based booting support.

* tag 'omap-for-v3.13/more-fixes-for-merge-window-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init
  ARM: OMAP2+: Remove legacy mux code for display.c
  ARM: OMAP2+: Fix undefined reference to set_cntfreq
  gpio: twl4030: Fix passing of pdata in the device tree case
  gpio: twl4030: Fix regression for twl gpio output
  ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain
  ARM: dts: Fix omap2 specific dtsi files by adding the missing entries
  ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x
  i2c: omap: Fix missing device tree flags for omap2
2013-11-25 13:34:49 -08:00
Olof Johansson
6dd1e35737 ARM: omap: fix warning with LPAE build
Some omap3 code is throwing a warning:
arch/arm/mach-omap2/pm34xx.c: In function 'omap3_save_secure_ram_context':
arch/arm/mach-omap2/pm34xx.c:123:32: warning: cast to pointer from
  integer of different size [-Wint-to-pointer-cast]

In reality this code will never actually execute with LPAE=y, since
Cortex-A8 doesn't support it. So downcasting the __pa() is safe in
this case.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Tony Lindgren <tony@atomide.com>
2013-11-25 13:34:48 -08:00
Thomas Petazzoni
96039f735e ARM: mvebu: re-enable PCIe on Armada 370 DB
Commit 14fd8ed0a7 ("ARM: mvebu: Relocate Armada 370/XP PCIe
device tree nodes") relocated the PCIe controller DT nodes one level
up in the Device Tree, to reflect a more correct representation of the
hardware introduced by the mvebu-mbus Device Tree binding.

However, while most of the boards were properly adjusted accordingly,
the Armada 370 DB board was left unchanged, and therefore, PCIe is
seen as not enabled on this board. This patch fixes that by moving the
PCIe controller node one level-up in armada-370-db.dts.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.12+
Fixes: 14fd8ed0a7 "ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes"
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-25 18:24:36 +00:00
Gregory CLEMENT
b6dda00cdd ARM: mvebu: use the virtual CPU registers to access coherency registers
The Armada XP provides a mechanism called "virtual CPU registers" or
"per-CPU register banking", to access the per-CPU registers of the
current CPU, without having to worry about finding on which CPU we're
running. CPU0 has its registers at 0x21800, CPU1 at 0x21900, CPU2 at
0x21A00 and CPU3 at 0x21B00. The virtual registers accessing the
current CPU registers are at 0x21000.

However, in the Device Tree node that provides the register addresses
for the coherency unit (which is responsible for ensuring coherency
between processors, and I/O coherency between processors and the
DMA-capable devices), a mistake was made: the CPU0-specific registers
were specified instead of the virtual CPU registers. This means that
the coherency barrier needed for I/O coherency was not behaving
properly when executed from a CPU different from CPU0. This patch
fixes that by using the virtual CPU registers.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.8+
Fixes: e60304f8cb "arm: mvebu: Add hardware I/O Coherency support"
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-25 18:22:10 +00:00
Catalin Marinas
b3bf6aa7e7 arm64: Unmask asynchronous aborts when in kernel mode
The asynchronous aborts are generally fatal for the kernel but they can
be masked via the pstate A bit. If a system error happens while in
kernel mode, it won't be visible until returning to user space. This
patch enables this kind of abort early to help identifying the cause.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-25 16:44:05 +00:00
Catalin Marinas
df503ba7f6 arm64: dts: Reserve the memory used for secondary CPU release address
With the spin-table SMP booting method, secondary CPUs poll a location
passed in the DT. The foundation-v8.dts file doesn't have this memory
reserved and there is a risk of Linux using it before secondary CPUs are
started.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-25 16:44:04 +00:00
Marc Zyngier
6468178767 arm64: let the core code deal with preempt_count
Commit f27dde8dee (sched: Add NEED_RESCHED to the preempt_count)
introduced the use of bit 31 in preempt_count for obscure scheduling
purposes.

This causes interrupts taken from EL0 to hit the (open coded) BUG when
this flag is flipped while handling the interrupt (we compare the
values before and after, and kill the kernel if they are different).

The fix is to stop messing with the preempt count entirely, as this
is already being dealt with in the generic code (irq_enter/irq_exit).

Tested on a dual A53 FPGA running cyclictest.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-25 16:44:04 +00:00
Martin Schwidefsky
127581b64b s390/mm: handle asce-type exceptions as normal page fault
Git commit 9e34f2686bb088b211b6cac8772e1f644c6180f8
"s390/mm,tlb: tlb flush on page table upgrade fixup" removed the
exception handler for the asce-type exception. This is incorrect
as the user-copy with MVCOS can cause asce-type exceptions in
the kernel if a user pointer is too large. Those need to be
handled with do_no_context to branch to the fixup in the
user-copy code.

The simplest fix for this problem is to call do_dat_exception for
asce-type excpetions, as there is no vma for the address the code
will handle the exception correctly.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-25 09:15:42 +01:00
Martin Schwidefsky
8adbf78ec4 s390,time: revert direct ktime path for s390 clockevent device
Git commit 4f37a68cda
"s390: Use direct ktime path for s390 clockevent device" makes use
of the CLOCK_EVT_FEAT_KTIME clockevent option to avoid the delta
calculation with ktime_get() in clockevents_program_event and the
get_tod_clock() in s390_next_event. This is based on the assumption
that the difference between the internal ktime and the hardware
clock is reflected in the wall_to_monotonic delta. But this is not
true, the ntp corrections are applied via changes to the tk->mult
multiplier and this is not reflected in wall_to_monotonic.

In theory this could be solved by using the raw monotonic clock
but it is simpler to switch back to the standard clock delta
calculation.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-25 09:15:41 +01:00
Martin Schwidefsky
79c74ecbeb s390/time,vdso: convert to the new update_vsyscall interface
Switch to the improved update_vsyscall interface that provides
sub-nanosecond precision for gettimeofday and clock_gettime.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-25 09:15:39 +01:00
Heiko Carstens
71a86ef055 s390/uaccess: add missing page table walk range check
When translating a user space address, the address must be checked against
the ASCE limit of the process. If the address is larger than the maximum
address that is reachable with the ASCE, an ASCE type exception must be
generated.

The current code simply ignored the higher order bits. This resulted in an
address wrap around in user space instead of an exception in user space.

Cc: stable@vger.kernel.org # v3.9+
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-25 09:15:38 +01:00
Chen Gang
e0513d9ea8 arch/powerpc/kernel: Use %12.12s instead of %12s to avoid memory overflow
for tmp_part->header.name:
    it is "Terminating null required only for names < 12 chars".
    so need to limit the %.12s for it in printk

  additional info:

    %12s  limit the width, not for the original string output length
          if name length is more than 12, it still can be fully displayed.
          if name length is less than 12, the ' ' will be filled before name.

    %.12s truly limit the original string output length (precision)

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-25 11:50:57 +11:00
Michael Neuling
ec67ad8281 powerpc/signals: Improved mark VSX not saved with small contexts fix
In a recent patch:
  commit c13f20ac48
  Author: Michael Neuling <mikey@neuling.org>
  powerpc/signals: Mark VSX not saved with small contexts

We fixed an issue but an improved solution was later discussed after the patch
was merged.

Firstly, this patch doesn't handle the 64bit signals case, which could also hit
this issue (but has never been reported).

Secondly, the original patch isn't clear what MSR VSX should be set to.  The
new approach below always clears the MSR VSX bit (to indicate no VSX is in the
context) and sets it only in the specific case where VSX is available (ie. when
VSX has been used and the signal context passed has space to provide the
state).

This reverts the original patch and replaces it with the improved solution.  It
also adds a 64 bit version.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-25 11:50:51 +11:00
Hari Bathini
8ff812719a powerpc/kdump: Adding symbols in vmcoreinfo to facilitate dump filtering
When CONFIG_SPARSEMEM_VMEMMAP option is used in kernel, makedumpfile fails
to filter vmcore dump as it fails to do vmemmap translations. So far
dump filtering on ppc64 never had to deal with vmemmap addresses seperately
as vmemmap regions where mapped in zone normal. But with the inclusion of
CONFIG_SPARSEMEM_VMEMMAP config option in kernel, this vmemmap address
translation support becomes necessary for dump filtering. For vmemmap adress
translation, few kernel symbols are needed by dump filtering tool. This patch
adds those symbols to vmcoreinfo, which a dump filtering tool can use for
filtering the kernel dump. Tested this changes successfully with makedumpfile
tool that supports vmemmap to physical address translation outside zone normal.

[ Removed unneeded #ifdef as suggested by Michael Ellerman --BenH ]

Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-25 11:50:12 +11:00
Anton Blanchard
962bc221c3 powerpc: allyesconfig should not select CONFIG_CPU_LITTLE_ENDIAN
Stephen reported a failure in an allyesconfig build.
CONFIG_CPU_LITTLE_ENDIAN=y gets set but his toolchain is not
new enough to support little endian. We really want to
default to a big endian build; Ben suggested using a choice
which defaults to CPU_BIG_ENDIAN.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-25 11:49:12 +11:00
Michael Neuling
924dd50bc4 powerpc: Fix error when cross building TAGS & cscope
Currently if I cross build TAGS or cscope from x86 I get this:
  % make ARCH=powerpc TAGS
  gcc-4.8.real: error: unrecognized command line option ‘-mbig-endian’
  GEN     TAGS
  %

I'm not setting CROSS_COMPILE= as logically I shouldn't need to and I
haven't needed to in the past when building TAGS or cscope.  Also, the
above completess correct as the error is not fatal to the build.

This was caused by:
    commit d72b080171
    Author: Ian Munsie <imunsie@au1.ibm.com>
    powerpc: Add ability to build little endian kernels

The below fixes this by testing for the -mbig-endian option before
adding it.

I've not done the same thing in the little endian case as if
-mlittle-endian doesn't exist, we probably want to fail quickly as you
probably have an old big endian compiler.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-25 11:49:11 +11:00
Linus Torvalds
26b265cd29 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 - Made x86 ablk_helper generic for ARM
 - Phase out chainiv in favour of eseqiv (affects IPsec)
 - Fixed aes-cbc IV corruption on s390
 - Added constant-time crypto_memneq which replaces memcmp
 - Fixed aes-ctr in omap-aes
 - Added OMAP3 ROM RNG support
 - Add PRNG support for MSM SoC's
 - Add and use Job Ring API in caam
 - Misc fixes

[ NOTE! This pull request was sent within the merge window, but Herbert
  has some questionable email sending setup that makes him public enemy
  #1 as far as gmail is concerned.  So most of his emails seem to be
  trapped by gmail as spam, resulting in me not seeing them.  - Linus ]

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (49 commits)
  crypto: s390 - Fix aes-cbc IV corruption
  crypto: omap-aes - Fix CTR mode counter length
  crypto: omap-sham - Add missing modalias
  padata: make the sequence counter an atomic_t
  crypto: caam - Modify the interface layers to use JR API's
  crypto: caam - Add API's to allocate/free Job Rings
  crypto: caam - Add Platform driver for Job Ring
  hwrng: msm - Add PRNG support for MSM SoC's
  ARM: DT: msm: Add Qualcomm's PRNG driver binding document
  crypto: skcipher - Use eseqiv even on UP machines
  crypto: talitos - Simplify key parsing
  crypto: picoxcell - Simplify and harden key parsing
  crypto: ixp4xx - Simplify and harden key parsing
  crypto: authencesn - Simplify key parsing
  crypto: authenc - Export key parsing helper function
  crypto: mv_cesa: remove deprecated IRQF_DISABLED
  hwrng: OMAP3 ROM Random Number Generator support
  crypto: sha256_ssse3 - also test for BMI2
  crypto: mv_cesa - Remove redundant of_match_ptr
  crypto: sahara - Remove redundant of_match_ptr
  ...
2013-11-23 16:18:25 -08:00
Arnaud Ebalard
2163e61c92 ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260
mv78260 flavour of Marvell Armada XP SoC has 3 PCIe units. The
two first units are both x4 and quad x1 capable. The third unit
is only x4 capable. This patch fixes mv78260 .dtsi to reflect
those capabilities.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.10.x
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-23 15:31:07 +00:00
Arnaud Ebalard
12b69a5997 ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable
Various Marvell datasheets advertise second PCIe unit of mv78230
flavour of Armada XP as x4/quad x1 capable. This second unit is in
fact only x1 capable. This patch fixes current mv78230 .dtsi to
reflect that, i.e. makes 1.0 the second interface (instead of 2.0
at the moment). This was successfully tested on a mv78230-based
ReadyNAS 2120 platform with a x1 device (FL1009 XHCI controller)
connected to this second interface.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: <stable@vger.kernel.org> # v3.10.x
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-23 15:29:06 +00:00
Scott Wood
d742aa152f powerpc/booke: Only check for hugetlb in flush if vma != NULL
And in flush_hugetlb_page(), don't check whether vma is NULL after
we've already dereferenced it.

This was found by Dan using static analysis as described here:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-November/113161.html

We currently get away with this because the callers that currently pass
NULL for vma seem to be 32-bit-only (e.g. highmem, and
CONFIG_DEBUG_PGALLOC in pgtable_32.c)  Hugetlb is currently 64-bit only,
so we never saw a NULL vma here.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
2013-11-22 16:57:29 -06:00
Adam Borowski
53567cf3c2 powerpc/85xx: typo in dts: "interupt" (four devices)
These lines were inoperative for four years, which puts some doubt into
their importance, and it's possible the fixed version will regress, but
at the very least they should be removed instead.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-11-22 16:57:25 -06:00
LEROY Christophe
ae2163be10 powerpc/8xx: mfspr SPRN_TBRx in lieu of mftb/mftbu is not supported
Commit beb2dc0a7a breaks the MPC8xx which
seems to not support using mfspr SPRN_TBRx instead of mftb/mftbu
despite what is written in the reference manual.

This patch reverts to the use of mftb/mftbu when CONFIG_8xx is
selected.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-11-22 16:56:48 -06:00
Tiejun Chen
cbf8a358be powerpc/corenet64: compile with CONFIG_E{5,6}500_CPU well
If CONFIG_ALTIVEC is enabled for CoreNet64, and if we also
select CONFIG_E{5,6}500_CPU this may introduce -mcpu=e500mc64
into $CFLAGS. But Altivec option not allowed with e500mc64,
then some compiling errors occur like this:

      CC      arch/powerpc/lib/xor_vmx.o
    arch/powerpc/lib/xor_vmx.c:1:0: error: AltiVec not supported in this target
    make[1]: *** [arch/powerpc/lib/xor_vmx.o] Error 1
    make: *** [arch/powerpc/lib] Error 2

So we should restrict e500mc64 in altivec scenario.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-11-22 16:56:33 -06:00
Linus Torvalds
aecde27c4f Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull DRM fixes from Dave Airlie:
 "I was going to leave this until post -rc1 but sysfs fixes broke
  hotplug in userspace, so I had to fix it harder, otherwise a set of
  pulls from intel, radeon and vmware,

  The vmware/ttm changes are bit larger but since its early and they are
  unlikely to break anything else I put them in, it lets vmware work
  with dri3"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (36 commits)
  drm/sysfs: fix hotplug regression since lifetime changes
  drm/exynos: g2d: fix memory leak to userptr
  drm/i915: Fix gen3 self-refresh watermarks
  drm/ttm: Remove set_need_resched from the ttm fault handler
  drm/ttm: Don't move non-existing data
  drm/radeon: hook up backlight functions for CI and KV family.
  drm/i915: Replicate BIOS eDP bpp clamping hack for hsw
  drm/i915: Do not enable package C8 on unsupported hardware
  drm/i915: Hold pc8 lock around toggling pc8.gpu_idle
  drm/i915: encoder->get_config is no longer optional
  drm/i915/tv: add ->get_config callback
  drm/radeon/cik: Add macrotile mode array query
  drm/radeon/cik: Return backend map information to userspace
  drm/vmwgfx: Make vmwgfx dma buffers prime aware
  drm/vmwgfx: Make surfaces prime-aware
  drm/vmwgfx: Hook up the prime ioctls
  drm/ttm: Add a minimal prime implementation for ttm base objects
  drm/vmwgfx: Fix false lockdep warning
  drm/ttm: Allow execbuf util reserves without ticket
  drm/i915: restore the early forcewake cleanup
  ...
2013-11-22 10:56:11 -08:00
Linus Torvalds
7fa850ab4f Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
 "Some small fixes for this merge window, most of them quite self
  explanatory - the biggest thing here is a fix for the ARMv7 LPAE
  suspend/resume support"

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7894/1: kconfig: select GENERIC_CLOCKEVENTS if HAVE_ARM_ARCH_TIMER
  ARM: 7893/1: bitops: only emit .arch_extension mp if CONFIG_SMP
  ARM: 7892/1: Fix warning for V7M builds
  ARM: 7888/1: seccomp: not compatible with ARM OABI
  ARM: 7886/1: make OABI default to off
  ARM: 7885/1: Save/Restore 64-bit TTBR registers on LPAE suspend/resume
  ARM: 7884/1: mm: Fix ECC mem policy printk
  ARM: 7883/1: fix mov to mvn conversion in case of 64 bit phys_addr_t and BE
  ARM: 7882/1: mm: fix __phys_to_virt to work with 64 bit phys_addr_t in BE case
  ARM: 7881/1: __fixup_smp read of SCU config should do byteswap in BE case
  ARM: Fix nommu.c build warning
2013-11-22 09:56:51 -08:00
Linus Torvalds
c874e6fc35 Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Gleb Natapov.

* 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: kvm_clear_guest_page(): fix empty_zero_page usage
  kvm: mmu: delay mmu audit activation
  arm/arm64: KVM: Fix hyp mappings of vmalloc regions
2013-11-22 09:56:07 -08:00
Linus Torvalds
3bab0bf045 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull third set of powerpc updates from Benjamin Herrenschmidt:
 "This is a small collection of random bug fixes and a few improvements
  of Oops output which I deemed valuable enough to include as well.

  The fixes are essentially recent build breakage and regressions, and a
  couple of older bugs such as the DTL log duplication, the EEH issue
  with PCI_COMMAND_MASTER and the problem with small contexts passed to
  get/set_context with VSX enabled"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/signals: Mark VSX not saved with small contexts
  powerpc/pseries: Fix SMP=n build of rng.c
  powerpc: Make cpu_to_chip_id() available when SMP=n
  powerpc/vio: Fix a dma_mask issue of vio
  powerpc: booke: Fix build failures
  powerpc: ppc64 address space capped at 32TB, mmap randomisation disabled
  powerpc: Only print PACATMSCRATCH in oops when TM is active
  powerpc/pseries: Duplicate dtl entries sometimes sent to userspace
  powerpc: Remove a few lines of oops output
  powerpc: Print DAR and DSISR on machine check oopses
  powerpc: Fix __get_user_pages_fast() irq handling
  powerpc/eeh: More accurate log
  powerpc/eeh: Enable PCI_COMMAND_MASTER for PCI bridges
2013-11-22 08:07:11 -08:00
Kirill A. Shutemov
c283610e44 x86, mm: do not leak page->ptl for pmd page tables
There are two code paths how page with pmd page table can be freed:
pmd_free() and pmd_free_tlb().

I've missed the second one and didn't add page table destructor call
there.  It leads to leak of page->ptl for pmd page tables, if
dynamically allocated page->ptl is in use.

The patch adds the missed destructor and modifies documentation
accordingly.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Andrey Vagin <avagin@openvz.org>
Tested-by: Andrey Vagin <avagin@openvz.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-21 16:42:28 -08:00
Dave Airlie
cf96967794 Merge tag 'drm-intel-fixes-2013-11-20' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
Just a small pile of fixes for bugs and a few regressions. I'm still
trying to track down a driver load hang on my g33 (which infuriatingly
doesn't happen when loading the module manually after boot), somehow
bisecting loves to go astray on this one :( And there's a (harmless)
locking WARN in the suspend code due to one of Jesse's vlv backlight
rework patches. Otherwise nothing outstanding afaik.

* tag 'drm-intel-fixes-2013-11-20' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Fix gen3 self-refresh watermarks
  drm/i915: Replicate BIOS eDP bpp clamping hack for hsw
  drm/i915: Do not enable package C8 on unsupported hardware
  drm/i915: Hold pc8 lock around toggling pc8.gpu_idle
  drm/i915: encoder->get_config is no longer optional
  drm/i915/tv: add ->get_config callback
  drm/i915: restore the early forcewake cleanup
  Partially revert "drm/i915: tune the RC6 threshold for stability"
  drm/i915: flush cursors harder
  i915: Use 120MHz LVDS SSC clock for gen5/gen6/gen7
  x86/early quirk: use gen6 stolen detection for VLV
  drm/i915/dp: set sink to power down mode on dp disable
2013-11-21 18:45:51 +10:00
Michael Neuling
c13f20ac48 powerpc/signals: Mark VSX not saved with small contexts
The VSX MSR bit in the user context indicates if the context contains VSX
state.  Currently we set this when the process has touched VSX at any stage.

Unfortunately, if the user has not provided enough space to save the VSX state,
we can't save it but we currently still set the MSR VSX bit.

This patch changes this to clear the MSR VSX bit when the user doesn't provide
enough space.  This indicates that there is no valid VSX state in the user
context.

This is needed to support get/set/make/swapcontext for applications that use
VSX but only provide a small context.  For example, getcontext in glibc
provides a smaller context since the VSX registers don't need to be saved over
the glibc function call.  But since the program calling getcontext may have
used VSX, the kernel currently says the VSX state is valid when it's not.  If
the returned context is then used in setcontext (ie. a small context without
VSX but with MSR VSX set), the kernel will refuse the context.  This situation
has been reported by the glibc community.

Based on patch from Carlos O'Donell.

Tested-by: Haren Myneni <haren@linux.vnet.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 10:33:45 +11:00
Michael Ellerman
148924f7a2 powerpc/pseries: Fix SMP=n build of rng.c
In commit a489043 "Implement arch_get_random_long() based on H_RANDOM" I
broke the SMP=n build. We were getting plpar_wrappers.h via spinlock.h
which breaks when SMP=n.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 10:33:45 +11:00
Michael Ellerman
3eb906c6b6 powerpc: Make cpu_to_chip_id() available when SMP=n
Up until now we have only used cpu_to_chip_id() in the topology code,
which is only used on SMP builds. However my recent commit a4da0d5
"Implement arch_get_random_long/int() for powernv" added a usage when
SMP=n, breaking the build.

Move cpu_to_chip_id() into prom.c so it is available for SMP=n builds.

We would move the extern to prom.h, but that breaks the include in
topology.h. Instead we leave it in smp.h, but move it out of the
CONFIG_SMP #ifdef. We also need to include asm/smp.h in rng.c, because
the linux version skips asm/smp.h on UP. What a mess.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 10:33:44 +11:00
Li Zhong
c610260928 powerpc/vio: Fix a dma_mask issue of vio
I encountered following issue:
[    0.283035] ibmvscsi 30000015: couldn't initialize event pool
[    5.688822] ibmvscsi: probe of 30000015 failed with error -1

which prevents the storage from being recognized, and the machine from
booting.

After some digging, it seems that it is caused by commit 4886c399da

as dma_mask pointer in viodev->dev is not set, so in
dma_set_mask_and_coherent(), dma_set_coherent_mask() is not called
because dma_set_mask(), which is dma_set_mask_pSeriesLP() returned EIO.
While before the commit, dma_set_coherent_mask() is always called.

I tried to replace dma_set_mask_and_coherent() with
dma_coerce_mask_and_coherent(), and the machine could boot again.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 10:33:43 +11:00
Aneesh Kumar K.V
dc7a9bd3d0 powerpc: booke: Fix build failures
arch/powerpc/platforms/wsp/wsp.c: In function ‘wsp_probe_devices’:
arch/powerpc/platforms/wsp/wsp.c:76:3: error: implicit declaration of function ‘of_address_to_resource’ [-Werror=implicit-function-declaration]

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 10:33:42 +11:00
Anton Blanchard
5a049f1490 powerpc: ppc64 address space capped at 32TB, mmap randomisation disabled
Commit fba2369e6c (mm: use vm_unmapped_area() on powerpc architecture)
has a bug in slice_scan_available() where we compare an unsigned long
(high_slices) against a shifted int. As a result, comparisons against
the top 32 bits of high_slices (representing the top 32TB) always
returns 0 and the top of our mmap region is clamped at 32TB

This also breaks mmap randomisation since the randomised address is
always up near the top of the address space and it gets clamped down
to 32TB.

Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 10:33:41 +11:00
Anton Blanchard
6d888d1ab0 powerpc: Only print PACATMSCRATCH in oops when TM is active
If TM is not active there is no need to print PACATMSCRATCH
so we can save ourselves a line.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 10:33:40 +11:00
Anton Blanchard
84b073868b powerpc/pseries: Duplicate dtl entries sometimes sent to userspace
When reading from the dispatch trace log (dtl) userspace interface, I
sometimes see duplicate entries. One example:

# hexdump -C dtl.out

00000000  07 04 00 0c 00 00 48 44  00 00 00 00 00 00 00 00
00000010  00 0c a0 b4 16 83 6d 68  00 00 00 00 00 00 00 00
00000020  00 00 00 00 10 00 13 50  80 00 00 00 00 00 d0 32

00000030  07 04 00 0c 00 00 48 44  00 00 00 00 00 00 00 00
00000040  00 0c a0 b4 16 83 6d 68  00 00 00 00 00 00 00 00
00000050  00 00 00 00 10 00 13 50  80 00 00 00 00 00 d0 32

The problem is in scan_dispatch_log() where we call dtl_consumer()
but bail out before incrementing the index.

To fix this I moved dtl_consumer() after the timebase comparison.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 10:33:39 +11:00
Anton Blanchard
9db8bcfd73 powerpc: Remove a few lines of oops output
We waste quite a few lines in our oops output:

...
MSR: 8000000000009032 <SF,EE,ME,IR,DR,RI>  CR: 28044024  XER: 00000000
SOFTE: 0
CFAR: 0000000000009088
DAR: 000000000000001c, DSISR: 40000000

GPR00: c0000000000c74f0 c00000037cc1b010 c000000000d2bb30 0000000000000000
...

We can do a better job here and remove 3 lines:

MSR: 8000000000009032 <SF,EE,ME,IR,DR,RI>  CR: 28044024  XER: 00000000
CFAR: 0000000000009088 DAR: 0000000000000010, DSISR: 40000000 SOFTE: 1
GPR00: c0000000000e3d10 c00000037cc2fda0 c000000000d2c3a8 0000000000000001

Also move PACATMSCRATCH up, it doesn't really belong in the stack
trace section.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 10:33:39 +11:00
Anton Blanchard
c54006491d powerpc: Print DAR and DSISR on machine check oopses
Machine check exceptions set DAR and DSISR, so print them in our
oops output.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 10:33:38 +11:00
Heiko Carstens
95f715b08f powerpc: Fix __get_user_pages_fast() irq handling
__get_user_pages_fast() may be called with interrupts disabled (see e.g.
get_futex_key() in kernel/futex.c) and therefore should use local_irq_save()
and local_irq_restore() instead of local_irq_disable()/enable().

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
CC: <stable@vger.kernel.org> [v3.12]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 10:33:37 +11:00
Gavin Shan
0b5381a618 powerpc/eeh: More accurate log
This clarifies in the log whether the error is a global PHB error
or an individual PE being frozen.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 10:33:36 +11:00
Gavin Shan
bf898ec5cb powerpc/eeh: Enable PCI_COMMAND_MASTER for PCI bridges
On PHB3, we will fail to fetch IODA tables without PCI_COMMAND_MASTER
on PCI bridges. According to one experiment I had, the MSIx interrupts
didn't raise from the adapter without the bit applied to all upstream
PCI bridges including root port of the adapter. The patch forces to
have that bit enabled accordingly.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 10:33:35 +11:00
Linus Torvalds
527d151131 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc LE updates from Ben Herrenschmidt:
 "With my previous pull request I mentioned some remaining Little Endian
  patches, notably support for our new ABI, which I was sitting on
  making sure it was all finalized.

  The toolchain folks confirmed it now, the new ABI is stable and merged
  with gcc, so we are all good.  Oh and we actually missed the actual
  Kconfig switch for LE so here it is, along with a couple more bug
  fixes.

  I have more fixes but not related to LE so I'll send them as a
  separate pull request tomorrow, let's get this one out of the way.

  Note that this supports running user space binaries using the new ABI,
  but the kernel itself still needs to be built with the old one.  We'll
  bring fixes for that after -rc1.

  Here's Anton log that goes with this series:

     This patch series adds support for the new ABI, LPAR support for
     H_SET_MODE and finally adds a kconfig option and defconfig.

     ABIv2 support was recently committed to binutils and gcc, and should
     be merged into glibc soon.  There are a number of very nice
     improvements including the removal of function descriptors.  Rusty's
     kernel patches allow binaries of either ABI to work, easing the
     transition"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Wrong DWARF CFI in the kernel vdso for little-endian / ELFv2
  powerpc: Add pseries_le_defconfig
  powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.
  powerpc: Don't use ELFv2 ABI to build the kernel
  powerpc: ELF2 binaries signal handling
  powerpc: ELF2 binaries launched directly.
  powerpc: Set eflags correctly for ELF ABIv2 core dumps.
  powerpc: Add TIF_ELF2ABI flag.
  pseries: Add H_SET_MODE to change exception endianness
  powerpc/pseries: Fix endian issues in pseries EEH code
2013-11-20 15:13:47 -08:00
Will Deacon
0c403462d6 ARM: 7894/1: kconfig: select GENERIC_CLOCKEVENTS if HAVE_ARM_ARCH_TIMER
The ARM architected timer driver doesn't compile without
GENERIC_CLOCKEVENTS selected, so ensure that we select it when building
for a platform that has the timer.

Without this patch, mach-virt fails to build without something like
mach-vexpress also selected.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-11-20 23:05:53 +00:00
Will Deacon
b7ec699405 ARM: 7893/1: bitops: only emit .arch_extension mp if CONFIG_SMP
Uwe reported a build failure when targetting a NOMMU platform with my
recent prefetch changes:

  arch/arm/lib/changebit.S: Assembler messages:
  arch/arm/lib/changebit.S:15: Error: architectural extension `mp' is
			not allowed for the current base architecture

This is due to use of the .arch_extension mp directive immediately prior
to an ALT_SMP(...) instruction. Whilst the ALT_SMP macro will expand to
nothing if !CONFIG_SMP, gas will still choke on the directive.

This patch fixes the issue by only emitting the sequence (including the
directive) if CONFIG_SMP=y.

Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-11-20 23:05:53 +00:00
Linus Torvalds
d5bdaf4f68 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha updates from Matt Turner:
 "It contains a few fixes and some work from Richard to make alpha
  emulation under QEMU much more usable"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: Prevent a NULL ptr dereference in csum_partial_copy.
  alpha: perf: fix out-of-bounds array access triggered from raw event
  alpha: Use qemu+cserve provided high-res clock and alarm.
  alpha: Switch to GENERIC_CLOCKEVENTS
  alpha: Enable the rpcc clocksource for single processor
  alpha: Reorganize rtc handling
  alpha: Primitive support for CPU power down.
  alpha: Allow HZ to be configured
  alpha: Notice if we're being run under QEMU
  alpha: Eliminate compiler warning from memset macro
2013-11-20 15:03:45 -08:00
Linus Torvalds
dc6ec87d4c Merge branch 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
 - revert an access_ok() patch which broke 32bit userspace on 64bit
   kernels
 - avoid a gcc miscompilation in two internal pa_memcpy() functions by
   not inlining those
 - do not export the definition of SOCK_NONBLOCK via uapi header (fixes
   build of audit package)
 - depending on the fault type we now correctly report either SIGBUS or
   SIGSEGV
 - a small fix to not compare a size_t variable for < 0

* 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: size_t is unsigned, so comparison size < 0 doesn't make sense.
  parisc: improve SIGBUS/SIGSEGV error reporting
  parisc: break out SOCK_NONBLOCK define to own asm header file
  parisc: do not inline pa_memcpy() internal functions
  Revert "parisc: implement full version of access_ok()"
2013-11-20 15:02:50 -08:00
Linus Torvalds
8a60ba0a05 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32
Pull AVR32 updates from Hans-Christian Egtvedt.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  avr32: uapi: be sure of "_UAPI" prefix for all guard macros
  avr32: add kprobe_ctlblk memory struct
  avr32: fix out-of-range jump in large kernels
  avr32: setup crt for early panic()
2013-11-20 15:02:22 -08:00
Linus Torvalds
b5898cd057 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs bits and pieces from Al Viro:
 "Assorted bits that got missed in the first pull request + fixes for a
  couple of coredump regressions"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fold try_to_ascend() into the sole remaining caller
  dcache.c: get rid of pointless macros
  take read_seqbegin_or_lock() and friends to seqlock.h
  consolidate simple ->d_delete() instances
  gfs2: endianness misannotations
  dump_emit(): use __kernel_write(), not vfs_write()
  dump_align(): fix the dumb braino
2013-11-20 14:25:39 -08:00
Al Viro
2a46eed54a Wrong page freed on preallocate_pmds() failure exit
Note that pmds[i] is simply uninitialized at that point...

Granted, it's very hard to hit (you need split page locks *and*
kmalloc(sizeof(spinlock_t), GFP_KERNEL) failing), but the code is
obviously bogus.

Introduced by commit 09ef493985 ("x86: add missed
pgtable_pmd_page_ctor/dtor calls for preallocated pmds")

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-20 14:22:14 -08:00
Ulrich Weigand
280270828f powerpc: Wrong DWARF CFI in the kernel vdso for little-endian / ELFv2
I've finally tracked down why my CR signal-unwind test case still
fails on little-endian.  The problem turned to be that the kernel
installs a signal trampoline in the vDSO, and provides a DWARF CFI
record for that trampoline.  This CFI describes the save location
for CR:

  rsave (70, 38*RSIZE + (RSIZE - CRSIZE))

which is correct for big-endian, but points to the wrong word on
little-endian.   This is wrong no matter which ABI.

In addition, for the ELFv2 ABI, we should not only provide a CFI
record for register 70 (cr2), but for all CR fields separately.
Strictly speaking, I guess this would mean providing two separate
vDSO images, one for ELFv1 processes and one for ELFv2 processes (or
maybe playing some tricks with conditional DWARF expressions).
However, having CFI records for the other CR fields in ELFv1 is not
actually wrong, they just will be ignored.   So it seems the simplest
fix would be just to always provide CFI for all the fields.

Signed-off-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 09:19:23 +11:00
Anton Blanchard
f53e462e90 powerpc: Add pseries_le_defconfig
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 09:19:23 +11:00
Anton Blanchard
7c105b63bd powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.
With the little endian support merged, we can add the
CONFIG_CPU_LITTLE_ENDIAN kernel config option.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 09:19:22 +11:00
Alistair Popple
b2ca8c895e powerpc: Don't use ELFv2 ABI to build the kernel
The kernel doesn't build correctly using the ELFv2 ABI.  This patch
ensures that the ELFv1 ABI is used when building a kernel with an
ELFv2 enabled compiler.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 09:19:21 +11:00
Rusty Russell
d606b92aed powerpc: ELF2 binaries signal handling
For the ELFv2 ABI, the hander is the entry point, not a function descriptor.
We also need to set up r12, and fortunately the fast_exception_return
exit path restores r12 for us so nothing else is required.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 09:19:20 +11:00
Rusty Russell
94af3abf99 powerpc: ELF2 binaries launched directly.
No function descriptor, but we set r12 up and set TIF_RESTOREALL as it
normally isn't restored on return from syscall.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 09:19:19 +11:00
Rusty Russell
918d03552e powerpc: Set eflags correctly for ELF ABIv2 core dumps.
We leave it at zero (though it could be 1) for old tasks.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 09:19:18 +11:00
Rusty Russell
373c76d622 powerpc: Add TIF_ELF2ABI flag.
Little endian ppc64 is getting an exciting new ABI.  This is reflected
by the bottom two bits of e_flags in the ELF header:

	0 == legacy binaries (v1 ABI)
	1 == binaries using the old ABI (compiled with a new toolchain)
	2 == binaries using the new ABI.

We store this in a thread flag, because we need to set it in core
dumps and for signal delivery.  Our chief concern is that it doesn't
use function descriptors.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 09:19:17 +11:00
Anton Blanchard
e844b1eeae pseries: Add H_SET_MODE to change exception endianness
On little endian builds call H_SET_MODE so exceptions have the
correct endianness. We need to reset the endian during kexec
so do that in the MMU hashtable clear callback.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 09:19:16 +11:00
Anton Blanchard
b91da2d4ce powerpc/pseries: Fix endian issues in pseries EEH code
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-21 09:19:15 +11:00
Linus Torvalds
82023bb7f7 More ACPI and power management updates for 3.13-rc1
- ACPI-based device hotplug fixes for issues introduced recently and
   a fix for an older error code path bug in the ACPI PCI host bridge
   driver.
 
 - Fix for recently broken OMAP cpufreq build from Viresh Kumar.
 
 - Fix for a recent hibernation regression related to s2disk.
 
 - Fix for a locking-related regression in the ACPI EC driver from
   Puneet Kumar.
 
 - System suspend error code path fix related to runtime PM and
   runtime PM documentation update from Ulf Hansson.
 
 - cpufreq's conservative governor fix from Xiaoguang Chen.
 
 - New processor IDs for intel_idle and turbostat and removal of
   an obsolete Kconfig option from Len Brown.
 
 - New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
   ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg.
 
 - Removal of several ACPI video DMI blacklist entries that are not
   necessary any more from Aaron Lu.
 
 - Rework of the ACPI companion representation in struct device and
   code cleanup related to that change from Rafael J Wysocki,
   Lan Tianyu and Jarkko Nikula.
 
 - Fixes for assigning names to ACPI-enumerated I2C and SPI devices
   from Jarkko Nikula.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSjLYNAAoJEILEb/54YlRxkEQP/1pmFWNwSsxLtTHd+PEs0Xbo
 QccqvjQrnw/c8GcmK4eZrz6/xyuepmmjy9kfRKj2ENZniy0NEsSFqkTdSO3vYlva
 8HKWUj7MV3evhFERXAF6Tu0b4Enx4jOP7VMtmYxJo3qrSnKRUcUzc6DGv/ACsUT1
 Nkj0Lhdsg053Z+YzIXrl50w0tCDEMhVmWlMHBtYgr+dMNVnkfPBGkqMblMkKCXT2
 w/yHvauZlxQHtI+8bVqTuGgNN0CPzdlpFGiuUF+5mDf6dRX8zlSn56Ia+Wyw1k9X
 dQp4jYQOgPRo03rNKqQPDiPxUdc7T0RAHRvDB51Ncweuh5PfZGguQe71p6/LKY2W
 i6zblZ0f/vc13hTiMrP+qzKcwZvgPB5DH7SfnHr61JKV7GNFCdYAqoceS5hYMzR9
 d2Fd+txgm763IHWewXfDS/G2cU492R5qr4jpmUIACBQKWDZcqmSRDwRj83t56Ltb
 jgFBMbg4vZxG7IARhind74xsALxdhsgmFjPmx+0qPWjYxcU8otQZpXbgGNI9iOuW
 pxIQv5WPQW0tTmwO4HSuVCOwDPLPz5R0jkev7SvSj3Ek3TeD7He4LmnK055CATiC
 puq+6dp1FISPOPJYk+0DI61qN/CB/qNwRp8LU3ctZwudPVhznIE9FFQ3iN1FdBg2
 X8VDcT9t7VvVuxSBjgkj
 =QMp+
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI and power management updates from Rafael Wysocki:

 - ACPI-based device hotplug fixes for issues introduced recently and a
   fix for an older error code path bug in the ACPI PCI host bridge
   driver

 - Fix for recently broken OMAP cpufreq build from Viresh Kumar

 - Fix for a recent hibernation regression related to s2disk

 - Fix for a locking-related regression in the ACPI EC driver from
   Puneet Kumar

 - System suspend error code path fix related to runtime PM and runtime
   PM documentation update from Ulf Hansson

 - cpufreq's conservative governor fix from Xiaoguang Chen

 - New processor IDs for intel_idle and turbostat and removal of an
   obsolete Kconfig option from Len Brown

 - New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
   ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg

 - Removal of several ACPI video DMI blacklist entries that are not
   necessary any more from Aaron Lu

 - Rework of the ACPI companion representation in struct device and code
   cleanup related to that change from Rafael J Wysocki, Lan Tianyu and
   Jarkko Nikula

 - Fixes for assigning names to ACPI-enumerated I2C and SPI devices from
   Jarkko Nikula

* tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
  PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration
  ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed()
  ACPI / PCI root: Clear driver_data before failing enumeration
  ACPI / hotplug: Fix PCI host bridge hot removal
  ACPI / hotplug: Fix acpi_bus_get_device() return value check
  cpufreq: governor: Remove fossil comment in the cpufreq_governor_dbs()
  ACPI / video: clean up DMI table for initial black screen problem
  ACPI / EC: Ensure lock is acquired before accessing ec struct members
  PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps()
  ACPI / AC: Remove struct acpi_device pointer from struct acpi_ac
  spi: Use stable dev_name for ACPI enumerated SPI slaves
  i2c: Use stable dev_name for ACPI enumerated I2C slaves
  ACPI: Provide acpi_dev_name accessor for struct acpi_device device name
  ACPI / bind: Use (put|get)_device() on ACPI device objects too
  ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro
  ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node
  cpufreq: OMAP: Fix compilation error 'r & ret undeclared'
  PM / Runtime: Fix error path for prepare
  PM / Runtime: Update documentation around probe|remove|suspend
  cpufreq: conservative: set requested_freq to policy max when it is over policy max
  ...
2013-11-20 13:25:04 -08:00
Linus Torvalds
e6d69a60b7 Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine changes from Vinod Koul:
 "This brings for slave dmaengine:

   - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as
     dmaengine can only transfer and not verify validaty of dma
     transfers

   - Bunch of fixes across drivers:

      - cppi41 driver fixes from Daniel

      - 8 channel freescale dma engine support and updated bindings from
        Hongbo

      - msx-dma fixes and cleanup by Markus

   - DMAengine updates from Dan:

      - Bartlomiej and Dan finalized a rework of the dma address unmap
        implementation.

      - In the course of testing 1/ a collection of enhancements to
        dmatest fell out.  Notably basic performance statistics, and
        fixed / enhanced test control through new module parameters
        'run', 'wait', 'noverify', and 'verbose'.  Thanks to Andriy and
        Linus [Walleij] for their review.

      - Testing the raid related corner cases of 1/ triggered bugs in
        the recently added 16-source operation support in the ioatdma
        driver.

      - Some minor fixes / cleanups to mv_xor and ioatdma"

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits)
  dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers
  dma: mv_xor: Remove unneeded NULL address check
  ioat: fix ioat3_irq_reinit
  ioat: kill msix_single_vector support
  raid6test: add new corner case for ioatdma driver
  ioatdma: clean up sed pool kmem_cache
  ioatdma: fix selection of 16 vs 8 source path
  ioatdma: fix sed pool selection
  ioatdma: Fix bug in selftest after removal of DMA_MEMSET.
  dmatest: verbose mode
  dmatest: convert to dmaengine_unmap_data
  dmatest: add a 'wait' parameter
  dmatest: add basic performance metrics
  dmatest: add support for skipping verification and random data setup
  dmatest: use pseudo random numbers
  dmatest: support xor-only, or pq-only channels in tests
  dmatest: restore ability to start test at module load and init
  dmatest: cleanup redundant "dmatest: " prefixes
  dmatest: replace stored results mechanism, with uniform messages
  Revert "dmatest: append verify result to results"
  ...
2013-11-20 13:20:24 -08:00
Uwe Kleine-König
1c28353111 ARM: at91: rm9200: switch back to clockevents_config_and_register
The timer code for at91rm9200 was already converted some time ago by
Shawn Guo in commit 838a2ae (ARM: use clockevents_config_and_register()
where possible) but because of a rounding issue in the timer core this
resulted in an easily reproducible oops. So it was reverted (commit
b7a8ca5 (ARM: at91: rm9200 fix time support)) which stopped the oops
from happening because min_delta_ns is increased by one in arch code
which stopped from problem from happening.

Now that the timer core problem is fixed (commit a4578ea (clockevents:
Sanitize ticks to nsec conversion)), we can switch back to the
clockevents_config_and_register helper.

Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-20 21:55:20 +01:00
Sasha Levin
521ee0cfb8 kvm: mmu: delay mmu audit activation
We should not be using jump labels before they were initialized. Push back
the callback to until after jump label initialization.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-11-20 11:12:56 +02:00
Chen Gang
e7f2c8c1f0 avr32: uapi: be sure of "_UAPI" prefix for all guard macros
For all uapi headers, need use "_UAPI" prefix for its guard macro
(which will be stripped by "scripts/headers_installer.sh").

Also remove redundant files (bitsperlong.h, errno.h, fcntl.h, ioctl.h,
ioctls.h, ipcbuf.h, kvm_para.h, mman.h, poll.h, resource.h, siginfo.h,
statfs.h, and unistd.h) which are already in Kbuild.

Also be sure that all "#endif" only have one empty line above, and each
file has guard macro.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Hans-Christian Egtvedt <hegtvedt@cisco.com>
2013-11-20 09:53:22 +01:00
Eirik Aanonsen
dbc0d691a4 avr32: add kprobe_ctlblk memory struct
This re-enables kprobes on AVR32 architecture.

Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
Signed-off-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
2013-11-20 09:53:22 +01:00