The 'distrust_firmware' module parameter dates from 2004 and the USB
subsystem is a lot more mature and reliable now than it was then.
Alter the default to false now.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20200910212512.16670-2-hamish.martin@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some integrated OHCI controller hubs do not expose all ports of the hub
to pins on the SoC. In some cases the unconnected ports generate
spurious over-current events. For example the Broadcom 56060/Ranger 2 SoC
contains a nominally 3 port hub but only the first port is wired.
Default behaviour for ohci-platform driver is to use global over-current
protection mode (AKA "ganged"). This leads to the spurious over-current
events affecting all ports in the hub.
We now alter the default to use per-port over-current protection.
This patch results in the following configuration changes depending
on quirks:
- For quirk OHCI_QUIRK_SUPERIO no changes. These systems remain set up
for ganged power switching and no over-current protection.
- For quirk OHCI_QUIRK_AMD756 or OHCI_QUIRK_HUB_POWER power switching
remains at none, while over-current protection is now guaranteed to be
set to per-port rather than the previous behaviour where it was either
none or global over-current protection depending on the value at
function entry.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20200910212512.16670-1-hamish.martin@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ehci controller found in some Broadcom switches with integrated SoCs
has an issue which causes a soft lockup with large transfers like you
see when running ext4 on USB3 flash drive.
Port the fix from the Broadcom XLDK to increase the OUT_THRESHOLD to
avoid the problem.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20200913215926.29880-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the newly introduced pm_ptr() macro, and mark the suspend/resume
functions __maybe_unused. These functions can then be moved outside the
CONFIG_PM_SUSPEND block, and the compiler can then process them and
detect build failures independently of the config. If unused, they will
simply be discarded by the compiler.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200903112554.34263-4-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the newly introduced pm_ptr() macro, and mark the suspend/resume
functions __maybe_unused. These functions can then be moved outside the
CONFIG_PM_SUSPEND block, and the compiler can then process them and
detect build failures independently of the config. If unused, they will
simply be discarded by the compiler.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200903112554.34263-3-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the newly introduced pm_ptr() macro, and mark the suspend/resume
functions __maybe_unused. These functions can then be moved outside the
CONFIG_PM_SUSPEND block, and the compiler can then process them and
detect build failures independently of the config. If unused, they will
simply be discarded by the compiler.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200903112554.34263-5-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9ML+IeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGA8EIAIy/kTbFS0yrE9yV
hb98oX0z9+EU9YQg9vhaRWwPd+rJF/JMQZLqYcwbhjG9abaUL3T3fEcSAefMHw8E
LAt+hYzA38dHt7tqhsFQX3vV1VorvDVICBVN0yRPRWKKikq4OPIHzaAR9tleGAF5
8btQisl1PjN+obwYmLuNb6aX16OCwAF+uXOwehcoJs9dvMNhwtXRzfOflWzOvOo6
tE0bHErlylLDfLv4ZzEfczTdks4QJZ7C0xLSf3oN9AAynW42Xnhct4hi8qZY/hCf
CMaqeN4hdpub6TvQIqBdDqMMjEXGFgeNSnAEBQY9VpvUqz8NTu6sQxwgJEKDF5tg
d81lv2c=
=uW/F
-----END PGP SIGNATURE-----
Merge 5.9-rc3 into usb-next
We want the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Let's try this again... Here are some USB fixes for 5.9-rc3.
This differs from the previous pull request for this release in that:
- the usb gadget patch now does not break some systems, and
actually does what it was intended to do. Many thanks to
Marek Szyprowski for quickly noticing and testing the patch
from Andy Shevchenko to resolve this issue.
- some more new USB quirks have been added to get some new
devices to work properly based on user reports.
Other than that, the original pull request patches are all here, and
they contain:
- usb gadget driver fixes
- xhci driver fixes
- typec fixes
- new quirks and ids
- fixes for USB patches that went into 5.9-rc1.
All of these have been tested in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX0t32g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylFMACeLEQgeN1rmfQfLyo2NHROQEeDhnIAniLMhchZ
p9dXWJ8aNeyI5OrNjD5b
=Vd05
-----END PGP SIGNATURE-----
Merge tag 'usb-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Let's try this again... Here are some USB fixes for 5.9-rc3.
This differs from the previous pull request for this release in that
the usb gadget patch now does not break some systems, and actually
does what it was intended to do. Many thanks to Marek Szyprowski for
quickly noticing and testing the patch from Andy Shevchenko to resolve
this issue.
Additionally, some more new USB quirks have been added to get some new
devices to work properly based on user reports.
Other than that, the patches are all here, and they contain:
- usb gadget driver fixes
- xhci driver fixes
- typec fixes
- new quirks and ids
- fixes for USB patches that went into 5.9-rc1.
All of these have been tested in linux-next with no reported issues"
* tag 'usb-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
usb: storage: Add unusual_uas entry for Sony PSZ drives
USB: Ignore UAS for JMicron JMS567 ATA/ATAPI Bridge
usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe()
USB: gadget: u_f: Unbreak offset calculation in VLAs
USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-D
usb: typec: tcpm: Fix Fix source hard reset response for TDA 2.3.1.1 and TDA 2.3.1.2 failures
USB: PHY: JZ4770: Fix static checker warning.
USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb()
USB: gadget: u_f: add overflow checks to VLA macros
xhci: Always restore EP_SOFT_CLEAR_TOGGLE even if ep reset failed
xhci: Do warm-reset when both CAS and XDEV_RESUME are set
usb: host: xhci: fix ep context print mismatch in debugfs
usb: uas: Add quirk for PNY Pro Elite
tools: usb: move to tools buildsystem
USB: Fix device driver race
USB: Also match device drivers using the ->match vfunc
usb: host: xhci-tegra: fix tegra_xusb_get_phy()
usb: host: xhci-tegra: otg usb2/usb3 port init
usb: hcd: Fix use after free in usb_hcd_pci_remove()
usb: typec: ucsi: Hold con->lock for the entire duration of ucsi_register_port()
...
If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
exynos_ohci_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.
Fixes: 62194244cf ("USB: Add Samsung Exynos OHCI diver")
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200826144931.1828-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some device drivers call libusb_clear_halt when target ep queue
is not empty. (eg. spice client connected to qemu for usb redir)
Before commit f5249461b5 ("xhci: Clear the host side toggle
manually when endpoint is soft reset"), that works well.
But now, we got the error log:
EP not empty, refuse reset
xhci_endpoint_reset failed and left ep_state's EP_SOFT_CLEAR_TOGGLE
bit still set
So all the subsequent urb sumbits to the ep will fail with the
warn log:
Can't enqueue URB while manually clearing toggle
We need to clear ep_state EP_SOFT_CLEAR_TOGGLE bit after
xhci_endpoint_reset, even if it failed.
Fixes: f5249461b5 ("xhci: Clear the host side toggle manually when endpoint is soft reset")
Cc: stable <stable@vger.kernel.org> # v4.17+
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200821091549.20556-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes re-plugging a USB device during system sleep renders the device
useless:
[ 173.418345] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x14203e2, return 0x10262
...
[ 176.496485] usb 2-4: Waited 2000ms for CONNECT
[ 176.496781] usb usb2-port4: status 0000.0262 after resume, -19
[ 176.497103] usb 2-4: can't resume, status -19
[ 176.497438] usb usb2-port4: logical disconnect
Because PLS equals to XDEV_RESUME, xHCI driver reports U3 to usbcore,
despite of CAS bit is flagged.
So proritize CAS over XDEV_RESUME to let usbcore handle warm-reset for
the port.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200821091549.20556-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dci is 0 based and xhci_get_ep_ctx() will do ep index increment to get
the ep context.
[rename dci to ep_index -Mathias]
Cc: stable <stable@vger.kernel.org> # v4.15+
Fixes: 02b6fdc2a1 ("usb: xhci: Add debugfs interface for xHCI driver")
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200821091549.20556-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tegra_xusb_init_usb_phy() should initialize "otg_usb2_port" and
"otg_usb3_port" with -EINVAL because "0" is a valid value
represents usb2 port 0 or usb3 port 0.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200811093143.699541-1-jckuo@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The board doesn't need the quirks to be run, and takes care of its own
initialization through a reset controller device. So let's bypass them.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629161845.6021-8-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit c65822fef4.
The initialization of Raspberry Pi 4's USB chip is now handled through a
reset controller. No need to directly call the firmware routine through a
PCI quirk.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629161845.6021-7-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some atypical users of xhci-pci might need to manually reset their xHCI
controller before starting the HCD setup. Check if a reset controller
device is available to the PCI bus and trigger a reset.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629161845.6021-6-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200817090209.26351-7-allen.cryptic@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the large set of USB and Thunderbolt patches for 5.9-rc1.
Nothing really magic/major in here, just lots of little changes and
updates:
- clean up language usages in USB core and some drivers
- Thunderbolt driver updates and additions
- USB Gadget driver updates
- dwc3 driver updates (like always...)
- build with "W=1" warning fixups
- mtu3 driver updates
- usb-serial driver updates and device ids
- typec additions and updates for new hardware
- xhci debug code updates for future platforms
- cdns3 driver updates
- lots of other minor driver updates and fixes and cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXymciA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylVVwCfU7JxgjFhAJTzC9K5efVqsrSHzxQAnijHrqUn
pHgI9M1ZRVGwmv2RNWb3
=9/8I
-----END PGP SIGNATURE-----
Merge tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt patches for 5.9-rc1.
Nothing really magic/major in here, just lots of little changes and
updates:
- clean up language usages in USB core and some drivers
- Thunderbolt driver updates and additions
- USB Gadget driver updates
- dwc3 driver updates (like always...)
- build with "W=1" warning fixups
- mtu3 driver updates
- usb-serial driver updates and device ids
- typec additions and updates for new hardware
- xhci debug code updates for future platforms
- cdns3 driver updates
- lots of other minor driver updates and fixes and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (330 commits)
usb: common: usb-conn-gpio: Register charger
usb: mtu3: simplify mtu3_req_complete()
usb: mtu3: clear dual mode of u3port when disable device
usb: mtu3: use MTU3_EP_WEDGE flag
usb: mtu3: remove useless member @busy in mtu3_ep struct
usb: mtu3: remove repeated error log
usb: mtu3: add ->udc_set_speed()
usb: mtu3: introduce a funtion to check maximum speed
usb: mtu3: clear interrupts status when disable interrupts
usb: mtu3: reinitialize CSR registers
usb: mtu3: fix macro for maximum number of packets
usb: mtu3: remove unnecessary pointer checks
usb: xhci: Fix ASMedia ASM1142 DMA addressing
usb: xhci: define IDs for various ASMedia host controllers
usb: musb: convert to devm_platform_ioremap_resource_byname
usb: gadget: tegra-xudc: convert to devm_platform_ioremap_resource_byname
usb: gadget: r8a66597: convert to devm_platform_ioremap_resource_byname
usb: dwc3: convert to devm_platform_ioremap_resource_byname
usb: cdns3: convert to devm_platform_ioremap_resource_byname
usb: phy: am335x: convert to devm_platform_ioremap_resource_byname
...
- Prepare for tasklet API modernization (Romain Perier, Allen Pais, Kees Cook)
-----BEGIN PGP SIGNATURE-----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=hb+e
-----END PGP SIGNATURE-----
Merge tag 'tasklets-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull tasklets API update from Kees Cook:
"These are the infrastructure updates needed to support converting the
tasklet API to something more modern (and hopefully for removal
further down the road).
There is a 300-patch series waiting in the wings to get set out to
subsystem maintainers, but these changes need to be present in the
kernel first. Since this has some treewide changes, I carried this
series for -next instead of paining Thomas with it in -tip, but it's
got his Ack.
This is similar to the timer_struct modernization from a while back,
but not nearly as messy (I hope). :)
- Prepare for tasklet API modernization (Romain Perier, Allen Pais,
Kees Cook)"
* tag 'tasklets-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
tasklet: Introduce new initialization API
treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD()
usb: gadget: udc: Avoid tasklet passing a global
This converts all the existing DECLARE_TASKLET() (and ...DISABLED)
macros with DECLARE_TASKLET_OLD() in preparation for refactoring the
tasklet callback type. All existing DECLARE_TASKLET() users had a "0"
data argument, it has been removed here as well.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
I've confirmed that the ASMedia ASM1142 has the same problem as the
ASM2142/ASM3142, in that it too reports that it supports 64-bit DMA
addresses when in fact it does not. As with the ASM2142/ASM3142, this
can cause problems on systems where the upper bits matter, and adding
the XHCI_NO_64BIT_SUPPORT quirk completely fixes the issue.
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200728042408.180529-3-cyrozap@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Not all ASMedia host controllers have a device ID that matches its part
number. #define some of these IDs to make it clearer at a glance which
chips require what quirks.
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Link: https://lore.kernel.org/r/20200728042408.180529-2-cyrozap@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sparse tool complains as follows:
drivers/usb/host/xhci-dbgtty.c:401:5: warning:
symbol 'xhci_dbc_tty_register_device' was not declared. Should it be static?
drivers/usb/host/xhci-dbgtty.c:452:6: warning:
symbol 'xhci_dbc_tty_unregister_device' was not declared. Should it be static?
After commit 6ae6470bfa ("xhci: dbc: Add a operations structure
to access driver functions"), those functions are not used outside
of xhci-dbgtty.c, so this commit marks them static.
Fixes: 6ae6470bfa ("xhci: dbc: Add a operations structure to access driver functions")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200727171149.3011-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sparse tool complains as follows:
drivers/usb/host/xhci-dbgcap.c:422:18: warning:
symbol 'xhci_dbc_ring_alloc' was not declared. Should it be static?
This function is not used outside ofxhci-dbgcap.c, so this commit
marks it static.
Fixes: ac286428c6 ("xhci: dbc: don't use generic xhci ring allocation functions for dbc.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200727171207.3101-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8d8h4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGd0sH/2iktYhMwPxzzpnb
eI3OuTX/mRn4vUFOfpx9dmGVleMfKkpbvnn3IY7wA62Qfv7J7lkFRa1Bd1DlqXfW
yyGTGDSKG5chiRCOU3s9ni92M4xIzFlrojyt/dIK2lUGMzUPI9FGlZRGQLKqqwLh
2syOXRWbcQ7e52IHtDSy3YBNveKRsP4NyqV+GxGiex18SMB/M3Pw9EMH614eDPsE
QAGQi5uGv4hPJtFHgXgUyBPLFHIyFAiVxhFRIj7u2DSEKY79+wO1CGWFiFvdTY4B
CbqKXLffY3iQdFsLJkj9Dl8cnOQnoY44V0EBzhhORxeOp71StUVaRwQMFa5tp48G
171s5Hs=
=BQIl
-----END PGP SIGNATURE-----
Merge 5.8-rc7 into usb-next
We want the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dbc should not be aware of, or use any dbctty specific variables.
currenly dbc driver reads the port->registered flag to see if the
callbacks should be called.
Only makes these decisions based on dbc internal state instead.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-27-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't call dbctty driver functions directly from dbc core code.
Introduce a new dbc_driver structure that contains function pointers
for disconnect and configure operations.
The driver (ttydbc) must provide these opeations when creating a dbc.
Name the structure dbc_driver instead of dbc_ops as we plan to
add more driver configureable values here, such as vid and pid.
Decouples dbc and dbctty.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-26-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split the dbc tty driver registrations function into separate
init and probe parts.
The init part will register the tty driver, and should in the future be
called from module_init().
The probe part will become the normal probe function, but for now it is
called from the init part.
The unregister function is s likewise split into remove and exit parts.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-25-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't pass endpoint pointer, dbctty should not be aware of
struct dbc_ep, knowing the direction is enough.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-23-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci_dbc_start() and xhci_dbc_stop() functions only used xhci_hcd pointer
to get the dbc pointer.
Pass the dbc pointer instead of the xhci_hcd pointer as a parameter
No functional changes
This change helps decoupling xhci and DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-22-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dbc mem_init and mem_cleanup functions used xhci_hcd to get to the device
pointer. The device pointer can be accessed directly from dbc structure,
so pass a pointer to dbc as a parameter instead.
No functional changes
This change helps decoupling xhci and DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-21-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The generic xhci ring allocations code needs struct xhci_hcd pointer, and
it allocates memory for the rings from dma pools created for the xhci
device.
In order to decouple xhci and DbC we have to create our own ring allocation
and free routines for DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-20-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DbC context is different from the xhci device context.
It's a lot smaller as it only contains three 64 bytes sub-contexts;
the info, endpoint-out, and endpoint-in contexts. In total 192 bytes.
The context size (CSZ) field in HCCPARAMS1 xhci register does not alter
DbC context size like it does for xhci device contexts.
So don't use the geneic xhci context memory allocation, or the
dma pool that is intended for xhci device contexts.
In addition to saving memory this also helps decoupleing xhci and dbc code.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-19-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dbc request completion callback doesn't need a xhci_hcd pointer.
The only user of the xhci_hcd pointer in dbgtty request callback was
the xhci_warn() function. Change it to dev_warn() instead.
While changing the callback function parameter to dbc in struct
xhci_requeset, move the struct xhci_request declaraion down a bit in the
header file to avoid compiler warinings
No functional changes
This change helps decoupling xhci and DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-18-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pass dbc pointer instead of struct xhci_hcd pointer to the get_in_ep() and
get_out_ep() helper functions.
No functional changes
This change helps decoupling xhci and DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-17-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pass dbc pointer to the xhci_dbc_tty_register_device() and
xhci_dbc_tty_unregister_device() functions instead of xhci_hcd pointer
These functions don't need a xhci_hcd pointer anymore, only use case was
the xhci_err() function, which is now changed to a dev_err() instead.
No functional changes
This change helps decoupling xhci and DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-16-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The event handling function only used xhci pointer to get the dbc pointer.
Pass the dbc pointer instead as a parameter
No functional changes
This change helps decoupling xhci and DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-15-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pass the dbc pointer instead of xhci_hcd pointer in order to
decouple xhci and dbc.
xhci_do_dbc_stop() only used xhci to get the dbc pointer.
Pass the dbc pointer instead as a parameter
No functional changes
This change helps decoupling xhci and DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-14-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct xhci_hcd pointer is not needed for dbc endpoint init and exit,
it was only used to get to the dbc structure.
Pass the dbc pointer as a parameter to these functions instead.
No functional changes
This change helps decoupling xhci and DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-13-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dbc_ep_do_queue() can now get the device pointer directly from dbc
structure instead of going through the xhci_hcd structure.
No functional changes
This change helps decoupling xhci and DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-12-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci_write_64() is essentially a wrapper for lo_hi_writeq(), but it
requires struct xhci_hcd * as a parameter.
Use lo_hi_writeq() directly instead
No functional changes
This change helps decoupling xhci and DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To make this change possible we also need to change
dbc_handle_port_status() to take dbc pointer as parameter instead of
xhci_hcd pointer.
Note that xhci_info() used xhci_to_hcd(xhci)->self.controller as the
device while for dev_info we use xhci_to_hcd(xhci)->self.sysdev.
In many cases those are the same, but not for some device where
a dwc3 controller creates a xhci platform device. In th this case
self.controller may be the platform device while self.sysdev is
the actual device known to firmware (dwc3).
This change helps decoupling xhci and DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the dbc structure contains a pointer to struct xhci_hcd,
and dbc functions use that to dig up the underlying device pointer.
We are trying to decouple xhci and dbc code, and prepare for
code that use dbc such as dbctty into into real device drivers.
This is one step along the way.
Keep functionality the same and keep the xhci pointer, and
let the new device pointer point to the xhci device for now.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dbc_dma_free_coherent() takes struct xhci_hcd pointer as a parameter, but
does nothing more than calls dma_free_coherent().
Remove it and call dma_free_coherent() directly instead.
No functional changes
This change helps decoupling xhci and DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dbc_dma_alloc_coherent() takes struct xhci_hcd pointer as an parameter, but
does nothing more than calls dma_alloc_coherent().
Remove it and call dma_alloc_coherent() directly instead.
No functional changes
This change helps decoupling xhci and DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The generic erst allocation and free functions take struct xhci_hcd pointer
as a parameter. Create own erst helpers for DbC in order to decouple xhci
and DbC
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's only used to dig out if we need to set a chain flag for specific
hosts. Pass the flag directly as a parameter instead.
No functional changes.
xhci_link_seg() is also used by DbC code, this change helps decoupling
xhci and DbC.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The generic inc_deq() helper takes struct xhci_hcd pointer as a parameter,
and is a lot more complex than needed for the DbC usecase.
In order to decouple xhci and DbC we have to create our own small
inc_evt_deq() helper, not relying on xhci.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current xhci debug message doesn't always output bus number, so it's
hard to figure out it's from USB2 or USB3 root hub.
In addition to that, some port numbers are offset to 0 and others are
offset to 1. Use the latter to match the USB core.
So use "bus number - port index + 1" to make debug message consistent.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 5c4e8d3781 ("usb: host: xhci-tegra: Add support for XUSB
context save/restore") is using the IPFS 'num_offsets' value when
allocating memory for FPCI context instead of the FPCI 'num_offsets'.
After commit cad064f1bd ("devres: handle zero size in devm_kmalloc()")
was added system suspend started failing on Tegra186. The kernel log
showed that the Tegra XHCI driver was crashing on entry to suspend when
attempting the save the USB context. On Tegra186, the IPFS context has a
zero length but the FPCI content has a non-zero length, and because of
the bug in the Tegra XHCI driver we are incorrectly allocating a zero
length array for the FPCI context. The crash seen on entering suspend
when we attempt to save the FPCI context and following commit
cad064f1bd ("devres: handle zero size in devm_kmalloc()") this now
causes a NULL pointer deference when we access the memory. Fix this by
correcting the amount of memory we are allocating for FPCI contexts.
Cc: stable@vger.kernel.org
Fixes: 5c4e8d3781 ("usb: host: xhci-tegra: Add support for XUSB context save/restore")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200715113842.30680-1-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ASM2142/ASM3142 (same PCI IDs) does not support full 64-bit DMA
addresses, which can cause silent memory corruption or IOMMU errors on
platforms that use the upper bits. Add the XHCI_NO_64BIT_SUPPORT quirk
to fix this issue.
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200717112734.328432-1-cyrozap@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The wMaxPacketSize field of endpoint descriptor may be zero
as default value in alternate interface, and they are not
actually selected when start stream, so skip them when try to
allocate bandwidth.
Cc: stable <stable@vger.kernel.org>
Fixes: 0cbd4b34cd ("xhci: mediatek: support MTK xHCI host controller")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1594360672-2076-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The OMAP1 OHCI driver is using the legacy GPIO API to grab some
random GPIO lines. One is from the TPS65010 chip and used for
power, another one is for overcurrent and while the driver picks
this line it doesn't watch it at all.
Convert the driver and the OMAP1 OSK board file to pass these
two GPIOs as machine described GPIO descriptors.
I noticed the overcurrent GPIO line is not really used in the
code so dropped in a little comment for other developers.
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200720135524.100374-2-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The OMAP1 was using static locals to hold the clock handles
which is uncommon and does not scale. Create a private data
struct and use that to hold the clocks.
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200720135524.100374-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719160910.60018-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200711135813.19798-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200713092314.32774-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI,
struct usb_xhci_acpi_match becomes defined by unused.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci-plat.c:457:36: warning: ‘usb_xhci_acpi_match’ defined but not used [-Wunused-const-variable=]
457 | static const struct acpi_device_id usb_xhci_acpi_match[] = {
| ^~~~~~~~~~~~~~~~~~~
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-33-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'td' has been completely unused since the driver's inception in 2009.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/fhci-sched.c: In function ‘fhci_queue_urb’:
drivers/usb/host/fhci-sched.c:704:13: warning: variable ‘td’ set but not used [-Wunused-but-set-variable]
704 | struct td *td;
| ^~
Cc: Shlomi Gridish <gridish@freescale.com>
Cc: Jerry Huang <Chang-Ming.Huang@freescale.com>
Cc: Peter Barada <peterb@logicpd.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-32-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neither have been used since the driver's inception in 2009.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/fhci-tds.c: In function ‘fhci_flush_bds’:
drivers/usb/host/fhci-tds.c:472:6: warning: variable ‘buf’ set but not used [-Wunused-but-set-variable]
472 | u32 buf;
| ^~~
drivers/usb/host/fhci-tds.c:470:6: warning: variable ‘extra_data’ set but not used [-Wunused-but-set-variable]
470 | u16 extra_data;
| ^~~~~~~~~~
drivers/usb/host/fhci-tds.c: In function ‘fhci_flush_actual_frame’:
drivers/usb/host/fhci-tds.c:527:6: warning: variable ‘extra_data’ set but not used [-Wunused-but-set-variable]
527 | u16 extra_data;
| ^~~~~~~~~~
Cc: Shlomi Gridish <gridish@freescale.com>
Cc: Jerry Huang <Chang-Ming.Huang@freescale.com>
Cc: Peter Barada <peterb@logicpd.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-31-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI,
struct ehci_acpi_match becomes defined by unused.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/ehci-platform.c:478:36: warning: ‘ehci_acpi_match’ defined but not used [-Wunused-const-variable=]
478 | static const struct acpi_device_id ehci_acpi_match[] = {
| ^~~~~~~~~~~~~~~
Cc: Tony Prisk <linux@prisktech.co.nz>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Steven Brown <sbrown@cortland.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: de Goede <hdegoede@redhat.com>
Cc: Michael Buesch <m@bues.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-29-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only 2 functions attempted to use kerneldoc in this massive file.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/fotg210-hcd.c: In function ‘fotg210_run’:
drivers/usb/host/fotg210-hcd.c:5013:6: warning: variable ‘hcc_params’ set but not used [-Wunused-but-set-variable]
drivers/usb/host/fotg210-hcd.c:5569: warning: Function parameter or member 'pdev' not described in 'fotg210_hcd_probe'
drivers/usb/host/fotg210-hcd.c:5666: warning: Function parameter or member 'pdev' not described in 'fotg210_hcd_remove'
drivers/usb/host/fotg210-hcd.c:5666: warning: Excess function parameter 'dev' description in 'fotg210_hcd_remove'
Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Cc: Feng-Hsin Chiang <john453@faraday-tech.com>
Cc: Po-Yu Chuang <ratbert.chuang@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-22-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document either of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/bcma-hcd.c:180: warning: Function parameter or member 'usb_dev' not described in 'bcma_hcd_usb20_old_arm_init'
drivers/usb/host/bcma-hcd.c:268: warning: Function parameter or member 'bcma_hcd' not described in 'bcma_hcd_usb20_ns_init'
Cc: Chuhong Yuan <hslester96@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Michael Buesch <m@bues.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-21-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The result is actually read into fotg210->caps->hcc_params. No
need to popuate an unused varible with the unchecked return value
from fotg210_readl().
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/fotg210-hcd.c: In function ‘fotg210_run’:
drivers/usb/host/fotg210-hcd.c:5013:6: warning: variable ‘hcc_params’ set but not used [-Wunused-but-set-variable]
5013 | u32 hcc_params;
| ^~~~~~~~~~
Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Cc: Feng-Hsin Chiang <john453@faraday-tech.com>
Cc: Po-Yu Chuang <ratbert.chuang@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-19-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/ehci-fsl.c:694: warning: Function parameter or member 'pdev' not described in 'fsl_ehci_drv_remove'
drivers/usb/host/ehci-fsl.c:694: warning: Excess function parameter 'dev' description in 'fsl_ehci_drv_remove'
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Randy Vinson <rvinson@mvista.com>
Cc: Dave Liu <daveliu@freescale.com>
Cc: Jerry Huang <Chang-Ming.Huang@freescale.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-18-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document the demoted function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/imx21-hcd.c:233: warning: Function parameter or member 'imx21' not described in 'copy_to_dmem'
drivers/usb/host/imx21-hcd.c:233: warning: Function parameter or member 'dmem_offset' not described in 'copy_to_dmem'
drivers/usb/host/imx21-hcd.c:233: warning: Function parameter or member 'src' not described in 'copy_to_dmem'
drivers/usb/host/imx21-hcd.c:233: warning: Function parameter or member 'count' not described in 'copy_to_dmem'
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Jay Monkman <jtm@lopingdog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks like it's been this way since the driver's inception in 2007.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/r8a66597-hcd.c: In function ‘clear_all_buffer’:
drivers/usb/host/r8a66597-hcd.c:478:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
478 | u16 tmp;
| ^~~
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci-debugfs.c:128:2: warning: function ‘xhci_debugfs_regset’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
128 | vsnprintf(rgs->name, sizeof(rgs->name), fmt, args);
| ^~~~~~~~~
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-19-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Demote xhci-dbgtty's file header to a standard comment block.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci-dbgtty.c:19: warning: Function parameter or member 'port' not described in 'dbc_send_packet'
drivers/usb/host/xhci-dbgtty.c:19: warning: Function parameter or member 'packet' not described in 'dbc_send_packet'
drivers/usb/host/xhci-dbgtty.c:19: warning: Function parameter or member 'size' not described in 'dbc_send_packet'
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Demote xhci-dbgcap's file header to a standard comment block.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci-dbgcap.c:20: warning: Function parameter or member 'xhci' not described in 'dbc_dma_alloc_coherent'
drivers/usb/host/xhci-dbgcap.c:20: warning: Function parameter or member 'size' not described in 'dbc_dma_alloc_coherent'
drivers/usb/host/xhci-dbgcap.c:20: warning: Function parameter or member 'dma_handle' not described in 'dbc_dma_alloc_coherent'
drivers/usb/host/xhci-dbgcap.c:20: warning: Function parameter or member 'flags' not described in 'dbc_dma_alloc_coherent'
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-16-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document the demoted function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'xhci' not described in 'xhci_ring_alloc'
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'num_segs' not described in 'xhci_ring_alloc'
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'cycle_state' not described in 'xhci_ring_alloc'
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'type' not described in 'xhci_ring_alloc'
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'max_packet' not described in 'xhci_ring_alloc'
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'flags' not described in 'xhci_ring_alloc'
Cc: Mathias Nyman <mathias.nyman@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document the demoted function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci.c:1285: warning: Function parameter or member 'desc' not described in 'xhci_get_endpoint_index'
Cc: Mathias Nyman <mathias.nyman@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document the function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/ohci-s3c2410.c:356: warning: Function parameter or member 'dev' not described in 'ohci_hcd_s3c2410_probe'
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Roman Weissgaerber <weissg@vienna.at>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Christopher Hoover <ch@hpl.hp.com>
Cc: Ben Dooks <ben@simtec.co.uk>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The EHCI OMAP driver includes <linux/gpio.h> but does not use
any symbols from this file, so drop it.
Cc: Roger Quadros <rogerq@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200703131059.515436-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we assign 'epnum' during the declaration we can also avoid "ISO
C90 forbids mixed declarations" issues. So it does looks like we
can have our cake and eat it in this scenario.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/oxu210hp-hcd.c: In function ‘submit_async’:
drivers/usb/host/oxu210hp-hcd.c:2040:19: warning: variable ‘qtd’ set but not used [-Wunused-but-set-variable]
2040 | struct ehci_qtd *qtd;
| ^~~
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Cc: "Eurotech S.p.A" <info@eurtech.it>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-24-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/host/ohci.h in included by a whole much of different
sourcefiles. Not all of them make use of cc_to_error. So mark
it as __maybe_used to convey that this behaviour is not only
acceptable it's expected.
Fixes the following kernel build warning(s):
In file included from drivers/usb/host/ohci-pci.c:25:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-platform.c:32:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-exynos.c:20:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-spear.c:22:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-st.c:26:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-at91.c:31:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
In file included from drivers/usb/host/ohci-s3c2410.c:32:
drivers/usb/host/ohci.h:165:18: warning: ‘cc_to_error’ defined but not used [-Wunused-const-variable=]
165 | static const int cc_to_error 1 = {
| ^~~~~~~~~~~
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Roman Weissgaerber <weissg@vienna.at>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-22-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neither usb_hcd_at91_probe() nor usb_hcd_at91_remove()'s function
headers reach the standards required of a kerneldoc entry. Only
one attempt at describing an argument was made, as it is not
correct (we're removing that too to save confusion).
Fixes the following kernel build warning(s):
drivers/usb/host/ohci-at91.c:166: warning: Function parameter or member 'driver' not described in 'usb_hcd_at91_probe'
drivers/usb/host/ohci-at91.c:166: warning: Function parameter or member 'pdev' not described in 'usb_hcd_at91_probe'
drivers/usb/host/ohci-at91.c:259: warning: Function parameter or member 'hcd' not described in 'usb_hcd_at91_remove'
drivers/usb/host/ohci-at91.c:259: warning: Function parameter or member 'pdev' not described in 'usb_hcd_at91_remove'
drivers/usb/host/ohci-at91.c:259: warning: Excess function parameter 'dev' description in 'usb_hcd_at91_remove'
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Thibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-21-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It would seem a shame to strip out all of the unused register entries,
since they can act as a fair source of documentation. Instead, mark
them all as __maybe_unused to show the build system that this behaviour
is known and intentional.
Fixes the following kernel build warning(s):
In file included from drivers/usb/host/isp1362-hcd.c:96:
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGALTTMR’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:199:1: note: in expansion of macro ‘ISP1362_REG’
199 | ISP1362_REG(OTGALTTMR, 0x6C, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGTIMER’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:198:1: note: in expansion of macro ‘ISP1362_REG’
198 | ISP1362_REG(OTGTIMER, 0x6A, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGINTENB’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:197:1: note: in expansion of macro ‘ISP1362_REG’
197 | ISP1362_REG(OTGINTENB, 0x69, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGINT’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:196:1: note: in expansion of macro ‘ISP1362_REG’
196 | ISP1362_REG(OTGINT, 0x68, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGSTATUS’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:195:1: note: in expansion of macro ‘ISP1362_REG’
195 | ISP1362_REG(OTGSTATUS, 0x67, REG_WIDTH_16, REG_ACCESS_R);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_OTGCONTROL’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:194:1: note: in expansion of macro ‘ISP1362_REG’
194 | ISP1362_REG(OTGCONTROL, 0x62, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCATLPORT’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:183:1: note: in expansion of macro ‘ISP1362_REG’
183 | ISP1362_REG(HCATLPORT, 0x44, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCINTLPORT’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:175:1: note: in expansion of macro ‘ISP1362_REG’
175 | ISP1362_REG(HCINTLPORT, 0x43, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCISTL1PORT’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:171:1: note: in expansion of macro ‘ISP1362_REG’
171 | ISP1362_REG(HCISTL1PORT, 0x42, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCISTL0PORT’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:170:1: note: in expansion of macro ‘ISP1362_REG’
170 | ISP1362_REG(HCISTL0PORT, 0x40, REG_WIDTH_16, REG_ACCESS_RW);
| ^~~~~~~~~~~
drivers/usb/host/isp1362.h:59:22: warning: ‘ISP1362_REG_HCINTDIS’ defined but not used [-Wunused-const-variable=]
59 | static isp1362_reg_t ISP1362_REG_##name = addr
| ^~~~~~~~~~~~
drivers/usb/host/isp1362.h:77:1: note: in expansion of macro ‘ISP1362_REG’
77 | ISP1362_REG(HCINTDIS, 0x05, REG_WIDTH_32, REG_ACCESS_RW);
| ^~~~~~~~~~~
Cc: "by L. Wassmann" <LW@KARO-electronics.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description for 'pdev' argument was missing from the function header.
Fixes the following W=1 warning:
drivers/usb/host/ehci-omap.c:87: warning: Function parameter or member 'pdev' not described in 'ehci_hcd_omap_probe'
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Vikram Pandita <vikram.pandita@ti.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Keshava Munegowda <keshava_mgowda@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-13-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
quirk_usb_handoff_xhci()'s function header is the only one across
the sourcefile which is denoted as a kerneldoc header. Despite
no attempt to document its arguments. Drop it down in status from
kerneldoc to a standard comment block to match the other headers
in the file.
Fixes the following W=1 kernel build warning:
drivers/usb/host/pci-quirks.c:1145: warning: Function parameter or member 'pdev' not described in 'quirk_usb_handoff_xhci'
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Martin Mares <mj@ucw.cz>
Cc: aleksey_gorelov@phoenix.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200702144625.2533530-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB2 devices with LPM enabled may interrupt the system suspend:
[ 932.510475] usb 1-7: usb suspend, wakeup 0
[ 932.510549] hub 1-0:1.0: hub_suspend
[ 932.510581] usb usb1: bus suspend, wakeup 0
[ 932.510590] xhci_hcd 0000:00:14.0: port 9 not suspended
[ 932.510593] xhci_hcd 0000:00:14.0: port 8 not suspended
..
[ 932.520323] xhci_hcd 0000:00:14.0: Port change event, 1-7, id 7, portsc: 0x400e03
..
[ 932.591405] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16
[ 932.591414] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -16
[ 932.591418] PM: Device 0000:00:14.0 failed to suspend async: error -16
During system suspend, USB core will let HC suspends the device if it
doesn't have remote wakeup enabled and doesn't have any children.
However, from the log above we can see that the usb 1-7 doesn't get bus
suspended due to not in U0. After a while the port finished U2 -> U0
transition, interrupts the suspend process.
The observation is that after disabling LPM, port doesn't transit to U0
immediately and can linger in U2. xHCI spec 4.23.5.2 states that the
maximum exit latency for USB2 LPM should be BESL + 10us. The BESL for
the affected device is advertised as 400us, which is still not enough
based on my testing result.
So let's use the maximum permitted latency, 10000, to poll for U0
status to solve the issue.
Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200624135949.22611-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just return if xHCI is quirked to disable LPM. We can save some time
from reading registers and doing spinlocks.
Add stable tag as we want this patch together with the next one,
"Poll for U0 after disabling USB2 LPM" which fixes a suspend issue
for some USB2 LPM devices
Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200624135949.22611-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When runtime suspend was enabled, runtime suspend might happen
when xhci is removing hcd. This might cause kernel panic when hcd
has been freed but runtime pm suspend related handle need to
reference it.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200624135949.22611-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unable to complete the enumeration of a USB TV Tuner device.
Per XHCI spec (4.6.5), the EP state field of the input context shall
be cleared for a set address command. In the special case of an FS
device that has "MaxPacketSize0 = 8", the Linux XHCI driver does
not do this before evaluating the context. With an XHCI controller
that checks the EP state field for parameter context error this
causes a problem in cases such as the device getting reset again
after enumeration.
When that field is cleared, the problem does not occur.
This was found and fixed by Sasi Kumar.
Cc: stable@vger.kernel.org
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200624135949.22611-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
EP_STATE_MASK should be 0x7 instead of 0xf
xhci spec 6.2.3 shows that the EP state field in the endpoint context data
structure consist of bits [2:0].
The old value included a bit from the next field which fortunately is a
RsvdZ region. So hopefully this hasn't caused too much harm
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200624135949.22611-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some reason, the TEST_ defines in the usb/ch9.h files did not have
the USB_ prefix on it, making it a bit confusing when reading the file,
as well as not the nicest thing to do in a uapi file.
So fix that up and add the USB_ prefix on to them, and fix up all
in-kernel usages. This included deleting the duplicate copy in the
net2272.h file.
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jules Irenge <jbi.octave@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: Rob Gill <rrobgill@protonmail.com>
Cc: Macpaul Lin <macpaul.lin@mediatek.com>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Acked-by: Bin Liu <b-liu@ti.com>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200618144206.2655890-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This comment has been present since the start of git. Since no one is
going to do anything about it, and all seems to work well, just drop the
thing entirely.
Cc: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200618094300.1887727-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver misses calling iounmap() in remove to undo the ioremap()
called in probe.
Add the missed call to fix it.
Fixes: f54aab6ebc ("usb: ohci-sm501 driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200610024844.3628408-1-hslester96@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A Synopsys USB2.0 core used in Huawei Kunpeng920 SoC has a bug which
might cause the host controller not issuing ping.
Bug description:
After indicating an Interrupt on Async Advance, the software uses the
doorbell mechanism to delete the Next Link queue head of the last
executed queue head. At this time, the host controller still references
the removed queue head(the queue head is NULL). NULL reference causes
the host controller to lose the USB device.
Solution:
After deleting the Next Link queue head, when has_synopsys_hc_bug set
to 1，the software can write one of the valid queue head addresses to
the ASYNCLISTADDR register to allow the host controller to get
the valid queue head. in order to solve that problem, this patch set
the flag for Huawei Kunpeng920
There are detailed instructions and solutions in this patch:
commit 2f7ac6c199 ("USB: ehci: add workaround for Synopsys HC bug")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/1591588019-44284-1-git-send-email-liulongfang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
exynos_ehci_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.
Fixes: 1bcc5aa87f ("USB: Add initial S5P EHCI driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200602114708.28620-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Tegra XUSB controller driver doesn't need to control the PLL power
supplies directly, but rather uses the pads provided by the XUSB pad
controller, which in turn is responsible for supplying power to the
PLLs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200612140205.2342900-1-thierry.reding@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Here are the large set of USB and PHY driver updates for 5.8-rc1.
Nothing huge, just lots of little things:
- USB gadget fixes and additions all over the place
- new PHY drivers
- PHY driver fixes and updates
- XHCI driver updates
- musb driver updates
- more USB-serial driver ids added
- various USB quirks added
- thunderbolt minor updates and fixes
- typec updates and additions
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzqVA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynftwCfeanyI6TR5AdfJVZN50B6/ySvVwcAn07i9VRX
tnt2kz0UqReYpLt0wyJ7
=YP7o
-----END PGP SIGNATURE-----
Merge tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY driver updates from Greg KH:
"Here are the large set of USB and PHY driver updates for 5.8-rc1.
Nothing huge, just lots of little things:
- USB gadget fixes and additions all over the place
- new PHY drivers
- PHY driver fixes and updates
- XHCI driver updates
- musb driver updates
- more USB-serial driver ids added
- various USB quirks added
- thunderbolt minor updates and fixes
- typec updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits)
usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs
usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings"
Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180"
Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver"
USB: serial: ch341: fix lockup of devices with limited prescaler
USB: serial: ch341: add basis for quirk detection
CDC-ACM: heed quirk also in error handling
USB: serial: option: add Telit LE910C1-EUX compositions
usb: musb: Fix runtime PM imbalance on error
usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
usb: musb: use true for 'use_dma'
usb: musb: start session in resume for host port
usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
USB: serial: qcserial: add DW5816e QDL support
thunderbolt: Add trivial .shutdown
usb: dwc3: keystone: Turn on USB3 PHY before controller
dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
dt-bindings: usb: convert keystone-usb.txt to YAML
...
The function ehci_mxc_drv_probe() does not perform sufficient error
checking after executing platform_get_irq(), thus fix it.
Fixes: 7e8d5cd93f ("USB: Add EHCI support for MX27 and MX31 based boards")
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200513132647.5456-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comparison of hcd->irq to less than zero for an error check will
never be true because hcd->irq is an unsigned int. Fix this by
assigning the int retval to the return of platform_get_irq and checking
this for the -ve error condition and assigning hcd->irq to retval.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: c856b4b0fd ("USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200515165453.104028-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When renesas module is not built, we get compiler warning on xhci driver
with W=1
CC [M] drivers/usb/host/xhci-rcar.o
drivers/usb/host/xhci-pci.h:13:5: warning: no previous prototype for ‘renesas_xhci_check_request_fw’ [-Wmissing-prototypes]
int renesas_xhci_check_request_fw(struct pci_dev *dev,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/host/xhci-pci.h:19:6: warning: no previous prototype for ‘renesas_xhci_pci_exit’ [-Wmissing-prototypes]
void renesas_xhci_pci_exit(struct pci_dev *dev) { };
^~~~~~~~~~~~~~~~~~~~~
We have defined these symbols when CONFIG_USB_XHCI_PCI_RENESAS is not
defined, but missed making then static.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 8bd5741e31 ("usb: renesas-xhci: Add the renesas xhci driver")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200519093002.1152144-1-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The xhci-pci-renesas module exports symbols for xhci-pci to load the
RAM/ROM on renesas xhci controllers. We had dependency which works
when both the modules are builtin or modules.
But if xhci-pci is inbuilt and xhci-pci-renesas in module, we get below
linker error:
drivers/usb/host/xhci-pci.o: In function `xhci_pci_remove':
drivers/usb/host/xhci-pci.c:411: undefined reference to `renesas_xhci_pci_exit'
drivers/usb/host/xhci-pci.o: In function `xhci_pci_probe':
drivers/usb/host/xhci-pci.c:345: undefined reference to `renesas_xhci_check_request_fw'
Fix this by adding USB_XHCI_PCI having depends on USB_XHCI_PCI_RENESAS
|| !USB_XHCI_PCI_RENESAS so that both can be either inbuilt or modules.
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Fixes: a66d21d7db ("usb: xhci: Add support for Renesas controller with memory")
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200519050622.994908-1-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
get_unaligned_le16() is defined in linux/unaligned/access_ok.h header
but it uses symbols which may not be available, leading to build
failures on ia64. Using asm/unaligned.h seem to be the right thing
and used in other drivers.
This fixes below error reported by kbuild test robot
In file included from drivers/usb/host/xhci-pci-renesas.c:9:
>> include/linux/unaligned/access_ok.h:8:28: error: redefinition of 'get_unaligned_le16'
8 | static __always_inline u16 get_unaligned_le16(const void *p)
| ^~~~~~~~~~~~~~~~~~
In file included from arch/ia64/include/asm/unaligned.h:5,
from arch/ia64/include/asm/io.h:23,
from arch/ia64/include/asm/smp.h:21,
from include/linux/smp.h:67,
from include/linux/percpu.h:7,
from include/linux/arch_topology.h:9,
from include/linux/topology.h:30,
from include/linux/gfp.h:9,
from include/linux/xarray.h:14,
from include/linux/radix-tree.h:18,
from include/linux/idr.h:15,
from include/linux/kernfs.h:13,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/of.h:17,
from include/linux/irqdomain.h:35,
from include/linux/acpi.h:13,
from drivers/usb/host/xhci-pci-renesas.c:4:
include/linux/unaligned/le_struct.h:7:19: note: previous definition of 'get_unaligned_le16' was here
7 | static inline u16 get_unaligned_le16(const void *p)
| ^~~~~~~~~~~~~~~~~~
In file included from drivers/usb/host/xhci-pci-renesas.c:9:
include/linux/unaligned/access_ok.h:13:28: error: redefinition of 'get_unaligned_le32'
13 | static __always_inline u32 get_unaligned_le32(const void *p)
| ^~~~~~~~~~~~~~~~~~
In file included from arch/ia64/include/asm/unaligned.h:5,
from arch/ia64/include/asm/io.h:23,
from arch/ia64/include/asm/smp.h:21,
from include/linux/smp.h:67,
from include/linux/percpu.h:7,
from include/linux/arch_topology.h:9,
from include/linux/topology.h:30,
from include/linux/gfp.h:9,
from include/linux/xarray.h:14,
from include/linux/radix-tree.h:18,
from include/linux/idr.h:15,
from include/linux/kernfs.h:13,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/of.h:17,
from include/linux/irqdomain.h:35,
from include/linux/acpi.h:13,
from drivers/usb/host/xhci-pci-renesas.c:4:
include/linux/unaligned/le_struct.h:12:19: note: previous definition of 'get_unaligned_le32' was here
Fixes: 8bd5741e31 ("usb: renesas-xhci: Add the renesas xhci driver")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200516162516.385149-1-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
uPD720201 supports ROM and allows software to program the ROM and boot
from it. Add support for detecting if ROM is present, if so load the ROM
if not programmed earlier.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200514122039.300417-5-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some rensas controller like uPD720201 and uPD720202 need firmware to be
loaded. Add these devices in table and invoke renesas firmware loader
functions to check and load the firmware into device memory when
required.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200514122039.300417-4-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This add a new driver for renesas xhci which is basically a firmware
loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will
invoke this driver for loading/unloading on relevant devices.
This patch adds a firmware loader for the uPD720201K8-711-BAC-A
and uPD720202K8-711-BAA-A variant. Both of these chips are listed
in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as
devices which need the firmware loader on page 2 in order to
work as they "do not support the External ROM".
The "Firmware Download Sequence" is describe in chapter
"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
The firmware "K2013080.mem" is available from a USB3.0 Host to
PCIe Adapter (PP2U-E card) "Firmware download" archive. An
alternative version can be sourced from Netgear's WNDR4700 GPL
archives.
The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3
(2012-06-15) state that the firmware is for the following devices:
- uPD720201 ES 2.0 sample whose revision ID is 2.
- uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
- uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
[vkoul: fixed comments:
used macros for timeout count and delay
removed renesas_fw_alive_check
cleaned renesas_fw_callback
removed recursion for renesas_fw_download
add register defines and field names
move to a separate file
make fw loader as sync probe so that we execute in probe and
prevent race
make xhci-pci-renesas a seprate module]
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_hcd_pci_probe expects users to call this with driver_data set as
hc_driver, that limits the possibility of using the driver_data for
driver data.
Add hc_driver as argument to usb_hcd_pci_probe and modify the callers
ehci/ohci/xhci/uhci to pass hc_driver as argument and freeup the
driver_data used
Tested xhci driver on Dragon-board RB3, compile tested ehci, ohci and
uhci.
[For all but the xHCI parts]
[For the xhci part]
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200514122039.300417-2-vkoul@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On platforms with IOMMU enabled, multiple SGs can be coalesced into one
by the IOMMU driver. In that case the SG list processing as part of the
completion of a urb on a bulk endpoint can result into a NULL pointer
dereference with the below stack dump.
<6> Unable to handle kernel NULL pointer dereference at virtual address 0000000c
<6> pgd = c0004000
<6> [0000000c] *pgd=00000000
<6> Internal error: Oops: 5 [#1] PREEMPT SMP ARM
<2> PC is at xhci_queue_bulk_tx+0x454/0x80c
<2> LR is at xhci_queue_bulk_tx+0x44c/0x80c
<2> pc : [<c08907c4>] lr : [<c08907bc>] psr: 000000d3
<2> sp : ca337c80 ip : 00000000 fp : ffffffff
<2> r10: 00000000 r9 : 50037000 r8 : 00004000
<2> r7 : 00000000 r6 : 00004000 r5 : 00000000 r4 : 00000000
<2> r3 : 00000000 r2 : 00000082 r1 : c2c1a200 r0 : 00000000
<2> Flags: nzcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none
<2> Control: 10c0383d Table: b412c06a DAC: 00000051
<6> Process usb-storage (pid: 5961, stack limit = 0xca336210)
<snip>
<2> [<c08907c4>] (xhci_queue_bulk_tx)
<2> [<c0881b3c>] (xhci_urb_enqueue)
<2> [<c0831068>] (usb_hcd_submit_urb)
<2> [<c08350b4>] (usb_sg_wait)
<2> [<c089f384>] (usb_stor_bulk_transfer_sglist)
<2> [<c089f2c0>] (usb_stor_bulk_srb)
<2> [<c089fe38>] (usb_stor_Bulk_transport)
<2> [<c089f468>] (usb_stor_invoke_transport)
<2> [<c08a11b4>] (usb_stor_control_thread)
<2> [<c014a534>] (kthread)
The above NULL pointer dereference is the result of block_len and the
sent_len set to zero after the first SG of the list when IOMMU driver
is enabled. Because of this the loop of processing the SGs has run
more than num_sgs which resulted in a sg_next on the last SG of the
list which has SG_END set.
Fix this by check for the sg before any attributes of the sg are
accessed.
[modified reason for null pointer dereference in commit message subject -Mathias]
Fixes: f9c589e142 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer")
Cc: stable@vger.kernel.org
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200514110432.25564-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the build system changes needed to get the Broadcom STB XHCI,
EHCI and OHCI functionality working. The OHCI support does not
require anything unique to Broadcom so the standard ohci-platform
driver is being used. Also update MAINTAINERS.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200512150019.25903-6-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new EHCI driver for Broadcom STB SoC's. A new EHCI driver
was created instead of adding support to the existing ehci platform
driver because of the code required to work around bugs in the EHCI
controller. The primary workaround is for a bug where the Core
violates the SOF interval between the first two SOFs transmitted after
resume. This only happens if the resume occurs near the end of a
microframe. The fix is to intercept the ehci-hcd request to complete
RESUME and align it to the start of the next microframe.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200512150019.25903-5-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for Broadcom STB SoC's to the xhci platform driver
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200512150019.25903-4-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 7d9e6f5aeb ("usb: host: ohci-sm501: init genalloc for local memory")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200506135625.106910-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the function platform_get_irq() failed, the negative value
returned will not be detected here. So fix error handling in
mv_ehci_probe(). And when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant
message here.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200508114305.15740-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete unused initialized value, because 'retval' will be assigined
by the function mv_ehci_enable(). And delete the extra blank lines.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200508142136.4232-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the defined variable "dev" to make the code cleaner. And
delete an extra blank line.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200508144024.7836-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be
loaded directly from an EEPROM or, if not present, by the SoC's
VideoCore. Inform VideoCore that VL805 was just reset.
Also, as this creates a dependency between USB_PCI and VideoCore's
firmware interface, and since USB_PCI can't be set as a module neither
this can. Reflect that on the firmware interface Kconfg.
Link: https://lore.kernel.org/r/20200505161318.26200-5-nsaenzjulienne@suse.de
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Fix the following coccicheck warning:
drivers/usb/host/pci-quirks.c:532:1-27: WARNING: Assignment of 0/1 to
bool variable
drivers/usb/host/pci-quirks.c:208:1-20: WARNING: Assignment of 0/1 to
bool variable
drivers/usb/host/pci-quirks.c:232:2-21: WARNING: Assignment of 0/1 to
bool variable
drivers/usb/host/pci-quirks.c:235:2-21: WARNING: Assignment of 0/1 to
bool variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200420042622.18564-1-yanaijie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The default control endpoint ep0 can return a STALL indicating the
device does not support the control transfer requests. This is called
a protocol stall and does not halt the endpoint.
xHC behaves a bit different. Its internal endpoint state will always
be halted on any stall, even if the device side of the endpiont is not
halted. So we do need to issue the reset endpoint command to clear the
xHC host intenal endpoint halt state, but should not request the HS hub
to clear the TT buffer unless device side of endpoint is halted.
Clearing the hub TT buffer at protocol stall caused ep0 to become
unresponsive for some FS/LS devices behind HS hubs, and class drivers
failed to set the interface due to timeout:
usb 1-2.1: 1:1: usb_set_interface failed (-110)
Fixes: ef513be0a9 ("usb: xhci: Add Clear_TT_Buffer")
Cc: <stable@vger.kernel.org> # v5.3
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200421140822.28233-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suspending the bus and host controller while a port is in a over-current
condition may halt the host.
Also keep the roothub running if over-current is active.
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200421140822.28233-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a class driver cancels its only URB then the endpoint ring buffer will
appear empty to the xhci driver. xHC hardware may still process cached
TRBs, and complete with a STALL, halting the endpoint.
This halted endpoint was not handled correctly by xhci driver as events on
empty rings were all assumed to be spurious events.
xhci driver refused to restart the ring with EP_HALTED flag set, so class
driver was never informed the endpoint halted even if it queued new URBs.
The host side of the endpoint needs to be reset, and dequeue pointer should
be moved in order to clear the cached TRBs and resetart the endpoint.
Small adjustments in finding the new dequeue pointer are needed to support
the case of stall on an empty ring and unknown current TD.
Cc: <stable@vger.kernel.org>
cc: Jeremy Compostella <jeremy.compostella@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200421140822.28233-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch corrects the SPDX License Identifier style in
header files related to USB host controller drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Link: https://lore.kernel.org/r/20200404092135.GA4522@nishad
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
u132_static_list is a global list protected by u132_module_lock.
It is read in the u132_hcd_exit() function without holding the lock
thus may lead to data race.
However, it turns out that this list isn't used for anything useful
and thus it is okay to get rid of it.
Thus, remove the u132_static_list from u132-hcd module.
Also remove struct list_head u132_list from struct u132.
Found by Linux Driver Verification project (linuxtesting.org).
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200404174102.19862-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use devm_platform_get_and_ioremap_resource() to simplify code, which
contains platform_get_resource() and devm_ioremap_resource(), it also
get the resource for use by the following code.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Link: https://lore.kernel.org/r/20200323160612.17277-4-zhengdejin5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use devm_platform_get_and_ioremap_resource() to simplify code, which
contains platform_get_resource() and devm_ioremap_resource(), it also
get the resource for use by the following code.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Link: https://lore.kernel.org/r/20200323160612.17277-3-zhengdejin5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get usb-phy's for availbale USB 2 phys. Register id notifiers for available
usb-phy's to receive role change notifications. Perform PP for the received
role change usb ports.
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
[treding@nvidia.com: rebase onto Greg's usb-next branch]
Signed-off-by: Thierry Reding <treding@nvidia.com>
In the same way as Intel Ice Lake TCSS (Type-C Subsystem) the Tiger Lake
TCSS xHCI needs to be runtime suspended whenever possible to allow the
TCSS hardware block to enter D3cold and thus save energy.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200312144517.1593-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Depending on the current link state the steps to resume the link to U0
varies. The normal case when a port is suspended (U3) we set the link
to U0 and wait for a port event when U3exit completed and port moved to
U0.
If the port is in U1/U2, then no event is issued, just set link to U0
If port is in Resume or Recovery state then the device has already
initiated resume, and this host initiated resume is racing against it.
Port event handler for device initiated resume will set link to U0,
just wait for the port to reach U0 before returning.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200312144517.1593-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Like U3 case, xHCI spec doesn't specify the upper bound of U0 transition
time. The 20ms is not enough for some devices.
Intead of polling PLS or PLC, we can facilitate the port change event to
know that the link transits to U0 is completed.
While at it, also separate U0 and U3 case to make the code cleaner.
[variable rename to u3exit, and skip completion for usb2 ports -Mathias ]
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200312144517.1593-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The xHCI spec doesn't specify the upper bound of U3 transition time. For
some devices 20ms is not enough, so we need to make sure the link state
is in U3 before further actions.
I've tried to use U3 Entry Capability by setting U3 Entry Enable in
config register, however the port change event for U3 transition
interrupts the system suspend process.
For now let's use the less ideal method by polling PLS.
[use usleep_range(), and shorten the delay time while polling -Mathias]
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200312144517.1593-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This PCIe controller chip is used on the Raspberry Pi 4 and multiple
adapter cards. There is no publicly available documentation for the
chip, yet both the downstream RPi4 kernel and the controller cards
support/advertise LPM support.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200312144517.1593-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Additional debugging to show xHC USBSTS register when stop endpoint
command watchdog triggers and host is assumed dead.
useful to know the current status before the controller is stopped by
the xhci driver and everything is released and freed.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200312144517.1593-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
